Notably this allows accessing fields in an abstract base class via a
derived class without going through `base`. E.g.
`my_obj.field_in_base_class` rather than
`my_obj.base.field_in_base_class`.
In `Convert`, allow forming a value or reference of abstract class type,
but not an initializer.
For now, limit the scope to just `ClassElementAccess` to avoid affecting
tests where I'm unclear if allowing abstract types is correct.
This test was assuming that we'd allow qualified lookup in rewrite
constraints, but that is not in agreement with the design. The design
says that the LHS of a rewrite must be a member access designator like
`.Member`.
If C++ overload resolution selects a builtin operator candidate for an
enum comparison or bitwise operator, provide support for that operator
by generating a corresponding Carbon builtin function. This is
structured to be easily extensible to other C++ builtin overload
candidates if we so choose, but for now the operators defined in the
prelude are doing what we want in most cases.
Bitwise operators on enums produce the same enum type as a result. This
intentionally deviates from C++, where they produce a promoted integral
type.
Assisted-by: Gemini via Antigravity
When a facet type contains a rewrite constraint like `.(J.J1).(I.I1)`
the ImplWitnessAccess should only use its RHS value if it's trying to
find `.(J.J1).(I.I1)`. It can't just look at the `.(I.I1)` part or it
may grab the RHS for a similar `.(K.K2).(I.I1)` rewrite.
While it's not possible to write a nested access on the LHS of a rewrite
constraint like `.(J.J1).(I.I1)`, it is possible to construct a facet
type that ends up with that as its rewrite using nested facet types:
```carbon
T:! J where .J1 impls (I where .I1 = ())
```
The access `T.(J.J1).(I.I1)` should evaluate to `()`. The
ImplWitnessAccess evaluation starts by looking for a rewrite of
`.(I.I1)` in the type of the access self, which is `T.(J.J1)`. Then it
looks for `.(I.I1)` in the type of that access self, which is `T`. At
that point it finds the rewrite of `.(J.J1).(I.I1) = ()` and can use the
`()`. However it can also find other rewrites that end in `.(I.I1)`.
To do this correctly, when moving through an ImplWitnessAccess to the
next nested access self, we record the access (interface, element) pair
that we are looking through. And then we require the rewrite constraint
to be prefixed by all of the (interface, element) pairs that we have
recorded.
- A test showing we need to search facets in the specific interface of
an access to find a witness
- A test using a `<type> impls ...` constraint from earlier in the same
facet type
- Some tests to show a rewrite constraint from earlier in the same facet
type is not incorrectly used when it's applied to a different facet
- A test of a facet type with a rewrite as the RHS of another rewrite,
and the rewrite there should not leak or access things from the outer
facet type
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Converting an integer value to a destination type that is not a valid
integer type -- such as `i8388609` or `i16777216`, whose bit widths are
diagnosed as invalid -- hit a CHECK failure in
`TypeStore::GetIntTypeInfo` during constant evaluation of `int.convert`
/ `int.convert_checked`:
```
CHECK failure at toolchain/sem_ir/type.cpp:189: int_info: Type type(...) is not an integer type
```
The width error is already diagnosed when forming the type
(`IntWidthNotMultipleOf8` / `IntWidthTooLarge`), so `PerformIntConvert`
and `PerformCheckedIntConvert` now use `TryGetIntTypeInfo` and produce
an error value instead of crashing, following the existing
`SemIR::ErrorInst::ConstantId` convention in `eval.cpp`.
Added a file test covering all three reproducers from the issue
(`i8388609`, `i16777216`, `Core.Int(8388609)`); it crashes without this
change. The full `//toolchain/testing:file_test` suite (1578 tests)
passes.
Fixes#7278.
I have reviewed this change and take responsibility for it.
Assisted-by: Claude
Because we now support calling a function with a `self` parameter
directly, we can unconditionally call `operator$(lhs, rhs)` rather than
calling `lhs.operator$(rhs)` if the selected operator function happens
to be a member function.
This makes the logic a bit simpler and the SemIR a bit smaller.
We can't do the same for Carbon operators, unfortunately, as we use the
member access to trigger impl lookup.
A binding can have a constant value that is an `ErrorInst` during error
recovery. In that case, deduction would crash when attempting to
diagnose that the binding had no deduced value.
Adds support for arithmetic and comparison operators on
`Core.CharLiteral`s, as well as conversions between `CharLiteral` and
integer types.
Make some minor tweaks to fix skill issues encountered while making this
change.
Assisted-by: Gemini via Antigravity
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.
Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.
An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.
Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Adapters were erroneously satisfying `Core.Destroy` because we were
directly getting the object's representation without consideration for
abstract and adapted types. This change ensures that adapted types'
representations are used instead of the adapter types.
This helps us move away from the clone-with-modifications approach to
thunking, which gets unwieldy as signatures get more complex.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of silently producing an `ErrorInst::InstId` when looking up a
private qualified name in the current package, bypass the access check.
We don't need it -- private names from other libraries are filtered out
by the import logic.
Also fix `DiagnoseInvalidQualifiedNameAccess` to actually always produce
a diagnostic, instead of silently ignoring access control failures in
non-class types. This is a no-op after the fix to the access logic,
since we only allow access control at class and namespace scope
currently, but should avoid this issue from recurring when that changes.
Assisted-by: Gemini via Antigravity
We exposed `Core.IntLiteral()`, `Core.FloatLiteral()`,
`Core.CharLiteral()`, and `Core.Bool()` as functions as a workaround,
because we had no way to provide the type names without parentheses that
the design requests. But now we can do so, by using an alias. Switch all
of these over from being functions to simply being names of the
corresponding types.
Assisted-by: Gemini via Antigravity
This ensures the clang_decls map is used as a cache - without this,
visiting the same entity twice could cause it to be
re-exported/duplicated. See attached test case.
Replace all uses of CppGlobalVarStore store with ClangDeclStore.
Adding a VarStorage->VarDecl mapping to ClangDeclStore is now done with
the `AddVar` method, which takes an extra `pattern_id` arg. While the
corresponding `ClangDecl` is unchanged from before, the reverse mapping
in `inst_id_to_clang_decl_id_` now uses the `pattern_id` as the key.
This is necessary because in some places the original VarStorage
instructions gets replaced (e.g. by a call to `Convert`). The
`pattern_id` remains stable in those cases.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
Fix a lowering crash when lowering a return by reference of a type with
an in-place initializing representation. We previously misinterpreted
this as an in-place initializing return.
This is addressed by changing lowering to interpret a `ReturnExpr` of a
reference expression as a reference return. However, that exposes
another issue: `return var;` produces a `ReturnExpr` of a reference
expression in the case where it returns in place! To fix that, we switch
`return var;` to producing a `ReturnExpr` of a value expression
regardless of whether the function has a return slot. This makes the
representation of `return var;` more uniform:
* If the expression is a reference, we're performing a `ref` return.
* If the expression is an initializing expression, we're performing a
normal by-initialization return.
* If the expression is a value expression, we're performing a `return
var;`.
Implement support for floating-point <-> integer type conversions as
described in #820 and #845, extended to support `unsafe as` conversions
for the conversions that can't be expressed as either implicit
conversions or `as` conversions.
One tricky part here is conversions from floating-point literals to
integer types. Such literals may have both a very large mantissa and a
corresponding somewhat large negative exponent, and still produce a
result that is in the range of values that a small integer type can
represent. In order to support that while avoiding building very large
2^N or 10^N constants in general, we first compute a conservative
approximation of the number of bits necessary to represent the integer
result, with an early exit if the number is either definitely too large
or definitely zero. The remaining cases have a reasonable bound on the
size of integer necessary to compute the base^exponent multiplicand.
Assisted-by: Gemini via Antigravity
Add `ExportVarToCpp`. This checks the `clang_decls` mapping and returns
an existing decl if found. Otherwise, it creates a new `VarDecl` and
adds it to the `clang_decls` mapping.
When lowering, in `FileContext::BuildGlobalVariableDecl`, the
`clang_decls` mapping is used to lookup an existing
`llvm::GlobalVariable` for the instruction. If found, use that rather
than creating a new one to avoid an unwanted second definition in the
llvm IR.
This change adds rudimentary support for C++ ranges in Carbon range-for
loops. Since C++ ranges are exposed through `Core.Iterate`, C++ ranges
have the same limitations as Carbon ranges (e.g. can't return
references).
`Iterate.CursorType` now requires `Destroy`, since types that implement
`CppRangeForIterate` can't be used in range-for loops unless their
cursor type can be verifiably destructible.
Since we can't currently iterate over ranges as references, the
`CppUnsafeDeref` interface can't require types that implement it to take
or return references.
Update the orphan rule to require a name to be defined within, or by,
the same scope as the impl declaration. Since libraries can not be
nested, this also enforces the old rule, but rejects more impl
declarations. In particular, it rejects an impl declaration in a generic
context which would have no way to provide a value for the generic
bindings it inherited from its enclosing scope, making the impl
unusable.
Discussed in open discussion
[2026-05-04](https://docs.google.com/document/d/1mjllGO3ZCL4qGt9uJHUtcxKoHAGEY7Y999ie4EtBWB8/edit?tab=t.3ifnhz83n73d#heading=h.p45zfugbmdih).
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Instead of requiring just one to have a designator, require each one.
You can't write `(type where A == B) & (type where C == .Self)` because
`A == B` has no designator. If the two facet types are combined into a
single `where` syntactically, their meaning does not change, and what we
allow should not change either. That is, `type where A == B and C ==
.Self` should be rejected since `A == B` does not contain a designator.
The design is also updated to make this clear.
Pass a function's self specific in `ScopeStack::PushForFunctionBody` and
remove assertion preventing lexical scopes from having specific IDs.
This allows lexical lookup within the function to find entities
associated with its self specific.
Closes#6793
For now, disable the use of array types as by-var paramters and by-init
return types when exporting Carbon functions to C++, as C++ does not
support raw arrays being passed or returned by value.
Assisted-by: Gemini via Antigravity
Include the library name in the fingerprint of an entity declared
`private` at namespace scope. Include the entity's fingerprint in the
mangling of a library-private entity.
This fixes miscompiles if two libraries in the same package declare
`private` entites with the same name. We can't fix this with internal
linkage because library-private entities can be reachable through
generics defined in the API file of the library.
Assisted-by: Gemini via Antigravity
As suggested in [1], replace `FieldInitializerMap` with a `FieldStore`.
The corresponding `FieldId` is now stored in `FieldDecl`. To make room
for the `FieldId`, the `ElementIndex` is now stored in the `Field`,
along with the initializer.
In import_ref.cpp, resolving `FieldDecl` initializers is now supported,
and in convert.cpp `LoadImportRef` is called to do so. The
`field_initializer_import.carbon` test now passes.
Printing a `FieldDecl` instruction now prints the initializer as well,
if present. See field_initializer.carbon for an example.
[1]:
https://github.com/carbon-language/carbon-lang/pull/7238#discussion_r3283217158
The `unused` modifier is rejected on parameters of a function
declaration, but the check only covered the explicit parameter list, so
an implicit parameter (such as self or a compile-time binding) could
carry unused without a definition. Check the implicit parameter list
too.
The code changes and the test updates are split into two commits for
easier review.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: Christopher Di Bella <cjdb.ns@gmail.com>
Carbon-side thunks (for example the `Copy`/`Destroy` witness thunks
generated for imported C++ types) are mangled by Carbon, and their names
incorporate a fingerprint of the involved types. The instruction
fingerprinter identifies a class only by its name and parent scope,
which is sufficient for Carbon classes but not for imported C++ classes:
different specializations of one class template (and other cases such as
types in anonymous namespaces) share a Carbon name and parent scope. As
a result, the thunks for two distinct specializations could mangle to
the same name, producing a single LLVM function with two definitions and
failing `verifyModule` during lowering.
When fingerprinting a class imported from C++, also include the Clang
mangled name of its type.
Test: toolchain/lower/testdata/interop/cpp/thunks.carbon gains a split
with two specializations of one class template, each requiring a thunk;
their thunks now get distinct mangled names instead of colliding.
Assisted-by: Claude Code
---------
Co-authored-by: Christopher Di Bella <cjdb.ns@gmail.com>
We've talked about adding the title to the filename several times over
the years and it seems really valuable. This requires us to compute a
"slug" for the title spelling that can be part of the filename.
Beyond that, we crossed 7000 recently, and so it seems likely that we
will need to add digits sooner rather than later here, so this goes
ahead and moves us to 6 digits so we don't have to adjust again for a
reasonable length of time.
To implement this and ensure we can sustain it going forward this adds a
tool to our pre-commit that validates (and corrects if needed) the
filename.
In order to update everything and keep links working, there are a _lot_
of changes, but the most interesting for direct review are in
`proposals/scripts`.
Assisted-by: Antigravity with Gemini
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When forming the constant value of a `where` expression, don't consider
it to be `.Self`-dependent if the dependence only comes from the RHS of
the `where`. More generally, ignore `.Self` dependence when evaluating a
facet type unless it comes from an extended interface or named
constraint. While we can get other kinds of constraint from the
left-hand side of a `where`, such constraints must either come from the
right-hand side of other `where` expressions or be extend constraints.
This fixes a crash in lowering caused by a concrete function containing
a `.Self`-symbolic `where` constant.
Assisted-by: Gemini via Antigravity
When performing deduction for a call to a generic function, we would
previously convert runtime arguments to match the parameter type, then
throw away the result. Instead, track whether deduction needs the value
of the argument, which will be the case only within compile-time
contexts such as generic bindings and types of instructions, and only
perform conversions during deduction for those contexts.
Fixes miscompiles when passing an argument requiring a runtime
conversion with side-effects to a generic function, where previously the
side-effects would have happened twice! (Once from deduction and once
from the real call argument conversion.)
Assisted-by: Gemini via Antigravity
Allow a `ref`-tagged expression to be converted to match a reference
parameter. Move the `ref` checks to the start of `Convert`. Remove the
diagnostic for applying `ref` to a non-reference expression so that
non-reference expressions that convert to a reference would be accepted
(although we don't currently have any such conversions).
Assisted-by: Gemini via Antigravity
We allow impl lookup to use `Self` which is partially identified, but we
were only allowing this for the `Self` facet appearing in the impl
lookup query self. We should also allow it when `Self` appears in the
impl lookup query target facet type.
But demonstrate that `Self` appearing in the interface of an
ImplWitnessAccess (a compound member access) is not sufficient at this
time, as it does not put `Self` into the type structure.
The `.Self` needs to be canonicalized when recording the witness, since
it will be a FacetAccessType in the `impls` clause.
Todo tests are also added for `C impls Y(.Self)`. The `.Self` in the
interface specific breaks everything as we end up replacing the `.Self`
with `C` in later `C as Y(.Self)` lookups, which then does not find the
witness.
Pull all the witnesses from `impls` constraints so that we capture
witnesses coming from named constraints on different self types, as `C
impls N(.Self)` may give witnesses for `C` or for other self types.
If a keyword or a sized type literal (eg, `f2`) is used in a context
where we are confident that we are expecting an identifier -- either
before a `:` in a binding pattern or after a `.` in a member access or
designator -- then recover as if a raw identifier was used.
This appears to be a particular stumbling block for coding agents, so
seems worth paying special attention to.
Add a mechanism to the tokenized buffer to track additional tokens
synthesized for error recovery so that we can keep the lexed token
sequence immutable and still satisfy the invariants throughout the rest
of the toolchain for recovery tokens. Thanks to chandlerc for suggesting
this approach!
`CppRangeForIterate` needs to support finding `begin()`/`end()` as a
pair of methods and as a pair of ADL-findable functions. This change
adds the ADL component, which lets us also diagnose types that don't
implement the interface.
Unlike methods, we apparently have support for overloads when using ADL.
In handle_let_and_var.cpp, field initializers are now handled like
regular `var` initializers, by calling `LocalPatternMatch`.
In pattern_match.cpp, `FieldDecl`s with initializers are handled by
storing a value in `SemIR::File::field_initializers()`. This is a new
map where the keys are `FieldDecl` `InstId`s and the map values are
`InstId`s representing the initializer value.
In convert.cpp, `ConvertStructToStructOrClass` now has a `get_default`
function parameter that callers can use to provide a field default.
`ConvertStructToClass` uses this to provide a default from field
initializers.