Stop dropping audiobook releases that are not m4b or mp3 (#1199)

An IRC audiobook search returned nothing while OpenBooks, reading the
same @search answer from the same channel, listed results. Three
separate defects were discarding them.

The audiobook format list was maintained by hand in four places and had
drifted. The settings UI offered only m4b/mp3/m4a/zip/rar, and that list
is the only one a user's config can be built from, so flac, opus, ogg,
aac, wav and wma were unreachable everywhere — even though the IRC
parser recognized them, the IRC sorter ranked them (dead code that could
never fire), archive extraction knew them and Prowlarr searched for
them. A FLAC audiobook was invisible in search and, if it arrived
anyway, rejected after download as "format not supported".
AUDIOBOOK_FORMATS and ARCHIVE_FORMATS now live once in core.utils and
every layer derives from them, which also restored the missing .opus in
the post-download scan's trackable extensions.

Widening the default alone would not have reached anyone already
affected: initialize_default_configs() writes field defaults only when a
tab has no config file yet, so an existing install keeps its persisted
m4b/mp3 list forever. migrate_audiobook_formats rewrites a list that
still matches the old default exactly and leaves every other value
alone — re-enabling formats someone had deliberately turned off would be
worse than leaving them narrow.

The IRC parser filtered by file extension alone. Multi-file audiobooks
ship as a .rar or .zip of MP3s, which matched neither SUPPORTED_FORMATS
nor SUPPORTED_AUDIOBOOK_FORMATS, so they fell out of the ebook bucket
and the audiobook bucket both. Results are now classified before the
format filter is applied: an audio extension means audiobook, an ebook
extension means ebook, and for a container — where the extension says
nothing about the contents — the release name decides. An ebook archive
stays out of audiobook results.

RESULT_LINE_REGEX matched \w+ after any dot, so a line carrying no file
extension parsed as format "5mb" out of "::INFO:: 620.5MB", taking the
title and the size down with it and guaranteeing every downstream filter
dropped it. Any decimal size did this. The extension is now matched
against the known formats, so such a line falls through to the simple
pattern and comes back as "unknown", which the rest of the parser
already handles. ALL_RECOGNIZED_FORMATS became an ordered tuple in the
process: it was a set, so which extension won for a line naming two of
them depended on set iteration order and could vary between restarts.

Refs #1129

.dockerignore

@@ -1,6 +1,7 @@
 .git
 .github
 .vscode
+.local
 .mypy_cache
 README_images
 .gitignore
@@ -37,3 +38,13 @@ dist/
 venv/
 .venv/
 env/
+
+# Frontend build artifacts (built in separate stage)
+src/frontend/node_modules/
+src/frontend/dist/
+src/frontend/.vite/
+
+# Old frontend code (replaced by src/frontend)
+templates/
+static/css/
+static/js/

.github/ISSUE_TEMPLATE/bug_report.md

@@ -11,9 +11,9 @@ assignees: ''
 
 ## Steps To Reproduce
 <!-- Steps to reproduce the behavior -->
-1. 
-2. 
-3. 
+1.
+2.
+3.
 
 ## Expected Behavior
 <!-- A clear and concise description of what you expected to happen -->
@@ -34,4 +34,4 @@ When running in debug mode, a DEBUG button will appear in the interface. Please
 <!-- If applicable, please provide your full docker-compose (redacted from any secrets) -->
 
 ## Additional Context
-<!-- Add any other context about the problem here --> 
+<!-- Add any other context about the problem here -->

.github/dependabot.yml

@@ -0,0 +1,87 @@
+version: 2
+updates:
+  # Python dependencies
+  # Dependabot supports uv version updates, but GitHub currently lists uv
+  # security updates as "Not applicable"; daily checks keep uv.lock moving
+  # while repo-level Dependabot alerts/security updates cover supported ecosystems.
+  - package-ecosystem: "uv"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "05:00"
+      timezone: "Europe/London"
+    cooldown:
+      default-days: 3
+    open-pull-requests-limit: 10
+    groups:
+      python-deps:
+        patterns: ["*"]
+        update-types: ["minor", "patch"]
+
+  # Frontend npm dependencies
+  - package-ecosystem: "npm"
+    directory: "/src/frontend"
+    schedule:
+      interval: "weekly"
+    cooldown:
+      default-days: 3
+    open-pull-requests-limit: 10
+    groups:
+      npm-deps:
+        patterns: ["*"]
+        update-types: ["minor", "patch"]
+
+  # Dockerfile base image digests. When a tag stays the same, Dependabot titles
+  # can only show digest prefixes, so keep the group name explicit.
+  - package-ecosystem: "docker"
+    directory: "/"
+    schedule:
+      interval: "weekly"
+    cooldown:
+      default-days: 3
+    open-pull-requests-limit: 5
+    groups:
+      docker-base-image-digests:
+        # Exclude python from the group on purpose. Dependabot's Docker
+        # pre-release filter is bypassed for *grouped* updates
+        # (dependabot-core#9496), so a grouped python update proposes pre-release
+        # tags like python:3.15.0b2 as if they were a normal stable minor bump.
+        # node + uv stay grouped into a single digest PR.
+        patterns: ["*"]
+        exclude-patterns: ["python"]
+    ignore:
+      # Node.js: block major-version bumps so dependabot never proposes
+      # moving from one LTS line to a non-LTS "Current" release (e.g. 24 -> 25).
+      # Node LTS is even-numbered only; major bumps should be deliberate.
+      - dependency-name: "node"
+        update-types: ["version-update:semver-major"]
+
+      # Python: block minor/major bumps. Ungrouping python (above) is NOT enough
+      # to keep pre-releases out — dependabot-core#13815 rewrote the Docker
+      # pre-release heuristic to catch PEP 440 tags like 3.15.0a2 / 3.5.0b3, but
+      # the suffixed real tag still slipped through as PR #1169
+      # (python:3.14.6-slim -> python:3.15.0b3-slim). CPython spells
+      # pre-releases without a separator, so tag parsing reads 3.15.0b3 as an
+      # ordinary version that sorts above 3.14.6.
+      #
+      # A minor-version ignore blocks it regardless of spelling. Patch bumps
+      # (3.14.6 -> 3.14.7) and same-tag digest refreshes still land automatically.
+      # Moving the runtime to a new Python minor is a manual, deliberate change:
+      # bump the tag here and confirm C-extension wheels (greenlet/gevent) exist
+      # for it — a source build against a pre-release ABI boots an app that binds
+      # its port but never serves, which wedges e2e for the full 6h job limit.
+      - dependency-name: "python"
+        update-types:
+          ["version-update:semver-major", "version-update:semver-minor"]
+
+  # GitHub Actions
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "weekly"
+    cooldown:
+      default-days: 3
+    open-pull-requests-limit: 5
+    groups:
+      gh-actions:
+        patterns: ["*"]

.github/workflows/build-and-publish-docker-image.yml

@@ -1,16 +1,54 @@
 name: Create and publish Docker images
 on:
   push:
-    branches:
-      - 'main'
     tags:
       - 'v*'
+  schedule:
+    # Nightly at 03:17 UTC — only builds if there are new commits on main
+    # since the last successful run (see check-changes job).
+    - cron: '17 3 * * *'
   workflow_dispatch:
+permissions: read-all
+
 env:
   REGISTRY: ghcr.io
-  IMAGE_NAME: ${{ github.repository }}
+  IMAGE_NAME: ${{ github.repository_owner }}/shelfmark
 jobs:
+  check-changes:
+    runs-on: ubuntu-latest
+    outputs:
+      should_build: ${{ steps.check.outputs.should_build }}
+    steps:
+      - name: Check for new commits since last successful build
+        id: check
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          EVENT_NAME: ${{ github.event_name }}
+          CURRENT_SHA: ${{ github.sha }}
+          REPO: ${{ github.repository }}
+        run: |
+          # Always build on tag pushes and manual dispatch.
+          if [[ "$EVENT_NAME" != "schedule" ]]; then
+            echo "Event is $EVENT_NAME — building unconditionally."
+            echo "should_build=true" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+
+          # Scheduled run: only build if HEAD differs from the last successful build on main.
+          LAST_SHA=$(gh api "/repos/${REPO}/actions/workflows/build-and-publish-docker-image.yml/runs?branch=main&status=success&per_page=1" --jq '.workflow_runs[0].head_sha' 2>/dev/null || true)
+          echo "Last successful build SHA: ${LAST_SHA:-<none>}"
+          echo "Current HEAD SHA:          ${CURRENT_SHA}"
+          if [[ -z "$LAST_SHA" || "$LAST_SHA" != "$CURRENT_SHA" ]]; then
+            echo "New commits detected — building."
+            echo "should_build=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "No new commits since last successful build — skipping."
+            echo "should_build=false" >> "$GITHUB_OUTPUT"
+          fi
+
   build-and-push-images:
+    needs: check-changes
+    if: needs.check-changes.outputs.should_build == 'true'
     runs-on: ubuntu-latest
     permissions:
       contents: read
@@ -20,33 +58,33 @@ jobs:
     strategy:
       matrix:
         include:
-          - suffix: ""
-            target: cwa-bd
-            image_name_suffix: ""
-          - suffix: "-tor"
-            target: cwa-bd-tor
-            image_name_suffix: "-tor"
-          - suffix: "-extbp"
-            target: cwa-bd-extbp
-            image_name_suffix: "-extbp"
+          - target: shelfmark
+          - target: shelfmark-lite
+            image_name_suffix: "-lite"
     steps:
       - name: Get current date
         id: date
         run: echo "date=$(date +'%Y-%m-%d')" >> $GITHUB_OUTPUT
-      
+
       - name: Checkout repository
-        uses: actions/checkout@v4
-      
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
       - name: Log in to the Container registry
-        uses: docker/login-action@v3
+        uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0
         with:
           registry: ${{ env.REGISTRY }}
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
-      
+
       - name: Extract metadata for ${{ matrix.target }} image
         id: meta
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@dc802804100637a589fabce1cb79ff13a1411302 # v6.2.0
+        env:
+          # Annotate both the per-platform manifests and the multi-arch image
+          # index. The index level is what manifest-list consumers (Renovate's
+          # minimumReleaseAge soak check, provenance/SBOM tooling) read for the
+          # standard org.opencontainers.image.* annotations, including `created`.
+          DOCKER_METADATA_ANNOTATIONS_LEVELS: index,manifest
         with:
           images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ matrix.image_name_suffix }}
           tags: |
@@ -56,13 +94,13 @@ jobs:
             type=semver,pattern={{major}}.{{minor}}
             type=sha
             type=ref,event=tag
-      
+
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-      
+        uses: docker/setup-buildx-action@bb05f3f5519dd87d3ba754cc423b652a5edd6d2c # v4.2.0
+
       - name: Build and push ${{ matrix.target }} Docker image
         id: push
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@53b7df96c91f9c12dcc8a07bcb9ccacbed38856a # v7.3.0
         with:
           platforms: linux/amd64,linux/arm64
           context: .
@@ -73,11 +111,79 @@ jobs:
             RELEASE_VERSION=${{ github.ref_name }}
           tags: ${{ steps.meta.outputs.tags }}
           labels: ${{ steps.meta.outputs.labels }}
-      
+          annotations: ${{ steps.meta.outputs.annotations }}
+
       - name: Generate artifact attestation for ${{ matrix.target }} image
         if: github.event_name != 'pull_request'
-        uses: actions/attest-build-provenance@v2
+        uses: actions/attest-build-provenance@4d101475d8b20a2381f78447822ac1eab6504dd8 # v4.2.2
         with:
           subject-name: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}${{ matrix.image_name_suffix }}
           subject-digest: ${{ steps.push.outputs.digest }}
-          push-to-registry: true
+          push-to-registry: true
+
+  # Create aliases for backwards compatibility
+  create-aliases:
+    needs: build-and-push-images
+    runs-on: ubuntu-latest
+    if: github.event_name != 'pull_request'
+    permissions:
+      contents: read
+      packages: write
+    env:
+      # Legacy name for backwards compatibility (hardcoded so it works after rename)
+      LEGACY_NAME: calibre-web-automated-book-downloader
+    steps:
+      - name: Log in to registry
+        uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0
+        with:
+          registry: ${{ env.REGISTRY }}
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@bb05f3f5519dd87d3ba754cc423b652a5edd6d2c # v4.2.0
+
+      - name: Create legacy aliases
+        run: |
+          # Current image names (follows repo name)
+          STANDARD="${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}"
+          LITE="${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}-lite"
+
+          # Legacy image names (hardcoded for backwards compatibility)
+          LEGACY="${{ env.REGISTRY }}/${{ github.repository_owner }}/${{ env.LEGACY_NAME }}"
+          LEGACY_TOR="${LEGACY}-tor"
+          LEGACY_EXTBP="${LEGACY}-extbp"
+
+          SHA_SHORT=$(echo "${{ github.sha }}" | cut -c1-7)
+
+          # Helper function to create alias with all standard tags
+          create_alias() {
+            local SOURCE=$1
+            local ALIAS=$2
+
+            # Always create SHA tag
+            docker buildx imagetools create -t "${ALIAS}:sha-${SHA_SHORT}" "${SOURCE}:sha-${SHA_SHORT}"
+
+            if [[ "${{ github.ref }}" == refs/tags/v* ]]; then
+              VERSION="${{ github.ref_name }}"
+              VERSION_NUM="${VERSION#v}"
+              MINOR="${VERSION_NUM%.*}"
+
+              docker buildx imagetools create -t "${ALIAS}:latest" "${SOURCE}:latest"
+              docker buildx imagetools create -t "${ALIAS}:${VERSION_NUM}" "${SOURCE}:${VERSION_NUM}"
+              docker buildx imagetools create -t "${ALIAS}:${MINOR}" "${SOURCE}:${MINOR}"
+              docker buildx imagetools create -t "${ALIAS}:${VERSION}" "${SOURCE}:${VERSION}"
+            else
+              docker buildx imagetools create -t "${ALIAS}:dev" "${SOURCE}:dev"
+            fi
+          }
+
+          # Create legacy aliases pointing to current images
+          # calibre-web-automated-book-downloader → standard image
+          create_alias "${STANDARD}" "${LEGACY}"
+
+          # calibre-web-automated-book-downloader-tor → standard image
+          create_alias "${STANDARD}" "${LEGACY_TOR}"
+
+          # calibre-web-automated-book-downloader-extbp → lite image
+          create_alias "${LITE}" "${LEGACY_EXTBP}"

.github/workflows/ci.yml

@@ -0,0 +1,158 @@
+name: CI
+
+on:
+  pull_request:
+    branches: [main]
+
+permissions:
+  contents: read
+
+jobs:
+  python-quality:
+    name: Python Quality
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Install uv and Python
+        uses: astral-sh/setup-uv@c771a70e6277c0a99b617c7a806ffedaca235ff9 # v9.0.0
+        with:
+          version: "0.11.3"
+          python-version: "3.14"
+          enable-cache: true
+
+      - name: Sync dependencies
+        run: make install-python-dev
+
+      - name: Lint
+        run: make python-lint
+
+      - name: Check formatting
+        run: make python-format
+
+      - name: Check dead code
+        run: make python-dead-code
+
+  python-typechecks:
+    name: Python Typechecks
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Install uv and Python
+        uses: astral-sh/setup-uv@c771a70e6277c0a99b617c7a806ffedaca235ff9 # v9.0.0
+        with:
+          version: "0.11.3"
+          python-version: "3.14"
+          enable-cache: true
+
+      - name: Sync dependencies
+        run: make install-python-dev
+
+      - name: Typecheck
+        run: make python-typecheck
+
+  python-tests:
+    name: Python Tests
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Install uv and Python
+        uses: astral-sh/setup-uv@c771a70e6277c0a99b617c7a806ffedaca235ff9 # v9.0.0
+        with:
+          version: "0.11.3"
+          python-version: "3.14"
+          enable-cache: true
+
+      - name: Sync dependencies
+        run: make install-python-dev
+
+      - name: Run tests
+        run: make python-test
+
+  docker-build-check:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@bb05f3f5519dd87d3ba754cc423b652a5edd6d2c # v4.2.0
+
+      - name: Build shelfmark-lite image
+        uses: docker/build-push-action@53b7df96c91f9c12dcc8a07bcb9ccacbed38856a # v7.3.0
+        with:
+          context: .
+          target: shelfmark-lite
+          platforms: linux/amd64
+          push: false
+          build-args: |
+            BUILD_VERSION=pr-${{ github.sha }}
+            RELEASE_VERSION=pr-${{ github.event.pull_request.number }}
+
+  frontend-quality:
+    name: Frontend Quality
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Set up Node
+        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        with:
+          node-version: 24
+          cache: "npm"
+          cache-dependency-path: src/frontend/package-lock.json
+
+      - name: Install dependencies
+        run: make install-ci
+
+      - name: Lint
+        run: make frontend-lint
+
+      - name: Check formatting
+        run: make frontend-format
+
+  frontend-typechecks:
+    name: Frontend Typechecks
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Set up Node
+        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        with:
+          node-version: 24
+          cache: "npm"
+          cache-dependency-path: src/frontend/package-lock.json
+
+      - name: Install dependencies
+        run: make install-ci
+
+      - name: Typecheck
+        run: make frontend-typecheck
+
+  frontend-tests:
+    name: Frontend Tests
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Set up Node
+        uses: actions/setup-node@820762786026740c76f36085b0efc47a31fe5020 # v7.0.0
+        with:
+          node-version: 24
+          cache: "npm"
+          cache-dependency-path: src/frontend/package-lock.json
+
+      - name: Install dependencies
+        run: make install-ci
+
+      - name: Unit tests
+        run: make frontend-test

.github/workflows/codeql.yml

@@ -0,0 +1,38 @@
+name: CodeQL
+
+on:
+  push:
+    branches: [main]
+  pull_request:
+    branches: [main]
+  schedule:
+    - cron: "0 6 * * 1" # Weekly on Monday at 6am UTC
+
+permissions:
+  contents: read
+
+jobs:
+  analyze:
+    runs-on: ubuntu-latest
+    permissions:
+      security-events: write
+    strategy:
+      fail-fast: false
+      matrix:
+        language: [python, javascript-typescript]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0 # v7.0.0
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@5595ccaf912efad79be6eef63a5619ff05969be3 # v3
+        with:
+          languages: ${{ matrix.language }}
+
+      - name: Autobuild
+        uses: github/codeql-action/autobuild@5595ccaf912efad79be6eef63a5619ff05969be3 # v3
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@5595ccaf912efad79be6eef63a5619ff05969be3 # v3
+        with:
+          category: "/language:${{ matrix.language }}"

.github/workflows/e2e-platform.yml

@@ -0,0 +1,135 @@
+name: E2E Platform
+
+# Hermetic end-to-end matrix: boots the app under test against mock
+# Anna's Archive / Cloudflare / bypasser / DNS / proxy / Tor / real torrent
+# clients and runs the cluster suite under each config profile.
+#
+# On a PR that touches relevant code, this runs a fast core subset *and* the heavy
+# `full` profile (real Chrome solving Cloudflare + DoH + real qBittorrent). The
+# `e2e-required` job aggregates them into ONE status check — make that check a
+# required status check in branch protection to block merges on any e2e failure
+# (see tests/e2e/platform/README.md "Gating PRs").
+
+on:
+  pull_request:
+  schedule:
+    - cron: "0 4 * * *"   # nightly full matrix
+  workflow_dispatch:
+
+concurrency:
+  group: e2e-platform-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  # Detect whether anything that affects the e2e platform changed. This lets the
+  # required check always report (never stuck "pending") while only spending CI on
+  # PRs that can actually break the e2e stack.
+  changes:
+    runs-on: ubuntu-latest
+    outputs:
+      relevant: ${{ steps.filter.outputs.relevant }}
+    steps:
+      - uses: actions/checkout@v7
+      - uses: dorny/paths-filter@v4.0.3
+        id: filter
+        with:
+          filters: |
+            relevant:
+              - 'shelfmark/**'
+              - 'entrypoint.sh'
+              - 'tor.sh'
+              - 'Dockerfile'
+              - 'tests/e2e/platform/**'
+              - '.github/workflows/e2e-platform.yml'
+
+  select-profiles:
+    needs: changes
+    if: needs.changes.outputs.relevant == 'true' || github.event_name != 'pull_request'
+    runs-on: ubuntu-latest
+    outputs:
+      profiles: ${{ steps.pick.outputs.profiles }}
+    steps:
+      - id: pick
+        run: |
+          if [ "${{ github.event_name }}" = "pull_request" ]; then
+            echo 'profiles=["baseline","bypasser-external","dns-blocked"]' >> "$GITHUB_OUTPUT"
+          else
+            echo 'profiles=["baseline","bypasser-external","bypasser-disabled","dns-manual","dns-blocked","dns-doh","proxy-http","proxy-socks","tor","client-transmission","client-deluge","client-qbittorrent-delayed"]' >> "$GITHUB_OUTPUT"
+          fi
+
+  e2e:
+    needs: select-profiles
+    runs-on: ubuntu-latest
+    # A wedged app under test must not burn GitHub's 6h max job limit. A healthy
+    # profile run finishes in ~3-5 min; anything past 25 is hung, not slow.
+    timeout-minutes: 25
+    strategy:
+      fail-fast: false
+      matrix:
+        profile: ${{ fromJSON(needs.select-profiles.outputs.profiles) }}
+    name: e2e (${{ matrix.profile }})
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v7
+      - name: Install uv and Python
+        uses: astral-sh/setup-uv@c771a70e6277c0a99b617c7a806ffedaca235ff9 # v9.0.0
+        with:
+          python-version: "3.14"
+          enable-cache: true
+      - name: Sync dependencies
+        run: make install-python-dev
+      - name: Run e2e platform (${{ matrix.profile }})
+        run: tests/e2e/platform/run-e2e.sh env/${{ matrix.profile }}.env
+      - name: Dump shelfmark logs on failure
+        if: failure()
+        run: cat tests/e2e/platform/.state/shelfmark.${{ matrix.profile }}.log || true
+
+  # Heavy "everything real" job: real Chrome internal bypasser solving Cloudflare +
+  # DoH + real qBittorrent webseed download. Runs on relevant PRs and nightly.
+  e2e-full:
+    needs: changes
+    if: needs.changes.outputs.relevant == 'true' || github.event_name != 'pull_request'
+    runs-on: ubuntu-latest
+    # Real Chrome + qBittorrent is the slowest profile; still nowhere near 40 min.
+    timeout-minutes: 40
+    name: e2e (full — real Chrome + qBittorrent)
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v7
+      - name: Install uv and Python
+        uses: astral-sh/setup-uv@c771a70e6277c0a99b617c7a806ffedaca235ff9 # v9.0.0
+        with:
+          python-version: "3.14"
+          enable-cache: true
+      - name: Sync dependencies
+        run: make install-python-dev
+      - name: Run full pipeline
+        run: tests/e2e/platform/run-e2e.sh env/full.env
+      - name: Dump logs on failure
+        if: failure()
+        run: |
+          cat tests/e2e/platform/.state/shelfmark.full.log || true
+          docker logs e2e-qbittorrent || true
+
+  # Single aggregated gate. ALWAYS runs (so a required check never hangs "pending"
+  # on unrelated PRs) and FAILS if any e2e job failed/was cancelled. Make THIS the
+  # required status check in branch protection.
+  e2e-required:
+    name: e2e required
+    needs: [e2e, e2e-full]
+    if: always()
+    runs-on: ubuntu-latest
+    steps:
+      - name: Aggregate e2e results
+        run: |
+          matrix='${{ needs.e2e.result }}'
+          full='${{ needs.e2e-full.result }}'
+          echo "e2e matrix=$matrix, e2e-full=$full"
+          # success or skipped (unrelated PR) is OK; failure/cancelled blocks.
+          for r in "$matrix" "$full"; do
+            if [ "$r" = "failure" ] || [ "$r" = "cancelled" ]; then
+              echo "::error::An e2e platform job did not pass — blocking."
+              exit 1
+            fi
+          done
+          echo "All e2e platform jobs passed (or were skipped as not relevant)."

.gitignore

@@ -74,6 +74,7 @@ pip-log.txt
 pip-delete-this-directory.txt
 
 # Unit test / coverage reports
+src/frontend/coverage/
 htmlcov/
 .tox/
 .nox/
@@ -165,6 +166,10 @@ ENV/
 env.bak/
 venv.bak/
 
+# ...but the e2e platform test profiles live in an env/ dir and must be tracked
+!tests/e2e/platform/env/
+!tests/e2e/platform/env/*.env
+
 # Spyder project settings
 .spyderproject
 .spyproject
@@ -227,3 +232,11 @@ pyrightconfig.json
 
 # End of https://www.toptal.com/developers/gitignore/api/macos,visualstudiocode,python
 /downloaded_files
+/.local/
+*.local.*
+AGENTS.md
+.claude/
+.nvmrc
+.playwright-mcp/
+frontend-dist/
+node_modules/

.pre-commit-config.yaml

@@ -0,0 +1,23 @@
+repos:
+  - repo: builtin
+    hooks:
+      - id: trailing-whitespace
+      - id: end-of-file-fixer
+      - id: check-added-large-files
+
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: v0.15.10
+    hooks:
+      - id: ruff-check
+        args: [--fix]
+      - id: ruff-format
+
+  - repo: local
+    hooks:
+      - id: oxfmt
+        name: oxfmt
+        entry: npx --prefix src/frontend oxfmt --config src/frontend/.oxfmtrc.json
+        language: system
+        types_or: [javascript, jsx, ts, tsx, css, json]
+        files: ^src/frontend/
+        exclude: package-lock\.json

.vscode/launch.json

@@ -2,17 +2,17 @@
   "version": "0.2.0",
   "configurations": [
     {
-      "name": "Python Debugger: Current CWABD File",
+      "name": "Python Debugger: Current Shelfmark File",
       "type": "debugpy",
       "request": "launch",
       "program": "${file}",
       "console": "integratedTerminal",
       "justMyCode": false,
       "env": {
-        "INGEST_DIR": "/tmp/cwa-book-downloader",
-        "TEMP_DIR": "/tmp/cwa-book-downloader",
+        "INGEST_DIR": "/tmp/shelfmark",
+        "TEMP_DIR": "/tmp/shelfmark",
         "LOG_LEVEL": "DEBUG",
-        "LOG_ROOT": "/tmp/cwa-book-downloader",
+        "LOG_ROOT": "/tmp/shelfmark",
         "ENABLE_LOGGING": "true",
         "DOCKERMODE": "false",
         "DEBUG": "true",
@@ -27,7 +27,7 @@
       "preLaunchTask": "docker-compose up (dev)", // Spin up dev containers
       "postDebugTask": "docker-compose down (dev)", // Optional: tear them down
       "env": {
-        "INGEST_DIR": "/tmp/cwa-book-downloader"
+        "INGEST_DIR": "/tmp/shelfmark"
       },
     },
     {
@@ -38,7 +38,7 @@
       "preLaunchTask": "docker-compose up (prod)",
       "postDebugTask": "docker-compose down (prod)",
       "env": {
-        "INGEST_DIR": "/tmp/cwa-book-downloader"
+        "INGEST_DIR": "/tmp/shelfmark"
       },
     },
     {
@@ -54,11 +54,11 @@
   ],
   "compounds": [
     {
-      "name": "Launch CWA-BD",
+      "name": "Launch Shelfmark",
       "configurations": [
-        "Launch cwa-bd app.py",
+        "Launch Shelfmark app.py",
         "Launch Browser"
       ]
     }
   ]
-}
+}

Dockerfile

@@ -1,5 +1,33 @@
+ARG TARGETPLATFORM
+ARG TARGETARCH
+ARG BUILDPLATFORM
+ARG BUILDARCH
+
+# Frontend build stage.
+FROM --platform=$BUILDPLATFORM node:24-alpine@sha256:d32cdf619f63fe0471182d08996dd516c6275bb5fd31ae06e55a570bd9e1ad43 AS frontend-builder
+
+# Helpful debug output to see what platforms BuildKit thinks it's using
+RUN echo "BUILDPLATFORM=$BUILDPLATFORM BUILDARCH=$BUILDARCH TARGETPLATFORM=$TARGETPLATFORM TARGETARCH=$TARGETARCH"
+
+WORKDIR /frontend
+
+# Copy frontend package files
+COPY src/frontend/package*.json ./
+
+# Install dependencies (cache mount for faster rebuilds)
+RUN --mount=type=cache,target=/root/.npm \
+    npm ci
+
+# Copy frontend source
+COPY src/frontend/ ./
+
+# Build the frontend
+RUN npm run build
+
 # Use python-slim as the base image
-FROM python:3.10-slim AS base
+FROM python:3.14.7-slim@sha256:83c1cebb322d099ac9e3a3a532ba74b0146d702838b25e4c75c02fa81ffeb910 AS base
+
+COPY --from=ghcr.io/astral-sh/uv:0.11.3@sha256:90bbb3c16635e9627f49eec6539f956d70746c409209041800a0280b93152823 /uv /uvx /bin/
 
 # Add build argument for version
 ARG BUILD_VERSION
@@ -13,27 +41,29 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 # Consistent environment variables grouped together
 ENV DEBIAN_FRONTEND=noninteractive \
     DOCKERMODE=true \
+    UV_LINK_MODE=copy \
     PYTHONUNBUFFERED=1 \
     PYTHONDONTWRITEBYTECODE=1 \
     PYTHONIOENCODING=UTF-8 \
-    PIP_NO_CACHE_DIR=1 \
-    PIP_DISABLE_PIP_VERSION_CHECK=1 \
-    PIP_DEFAULT_TIMEOUT=100 \
-    NAME=Calibre-Web-Automated-Book-Downloader \
+    NAME=Shelfmark \
+    PATH=/app/.venv/bin:$PATH \
     PYTHONPATH=/app \
-    # UID/GID will be handled by entrypoint script, but TZ/Locale are still needed
+    # PUID/PGID will be handled by entrypoint script, but TZ/Locale are still needed
     LANG=en_US.UTF-8 \
     LANGUAGE=en_US:en \
-    LC_ALL=en_US.UTF-8 \
-    APP_ENV=prod
+    LC_ALL=en_US.UTF-8
 
 # Set ARG for build-time expansion (FLASK_PORT), ENV for runtime access
 ENV FLASK_PORT=8084
 
 # Configure locale, timezone, and perform initial cleanup in a single layer
-# User/group creation is removed
 RUN apt-get update && \
     apt-get install -y --no-install-recommends \
+    # For building C-extensions (cffi, gevent, etc.)
+    gcc \
+    g++ \
+    libffi-dev \
+    python3-dev \
     # For locale
     locales tzdata \
     # For healthcheck
@@ -43,7 +73,19 @@ RUN apt-get update && \
     # For debug
     zip iputils-ping \
     # For user switching
-    sudo && \
+    gosu \
+    # --- Tor support (activated via USING_TOR=true) ---
+    tor \
+    supervisor \
+    iptables \
+    # --- WireGuard support (activated via USING_WIREGUARD=true) ---
+    wireguard-tools \
+    iproute2 \
+    procps \
+    ca-certificates && \
+    # Configure iptables alternatives for tor.sh compatibility
+    update-alternatives --set iptables /usr/sbin/iptables-legacy && \
+    update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy && \
     # Cleanup APT cache *after* all installs in this layer
     apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false && \
     apt-get clean && \
@@ -56,90 +98,144 @@ RUN apt-get update && \
     echo "LC_ALL=en_US.UTF-8" >> /etc/environment && \
     echo "LANG=en_US.UTF-8" > /etc/locale.conf
 
+# Create a fixed runtime user/group so hardened Docker/Kubernetes deployments
+# can start the container directly as a non-root user with a passwd entry.
+RUN groupadd -g 1000 shelfmark && \
+    useradd -u 1000 -g shelfmark -d /home/shelfmark -s /usr/sbin/nologin shelfmark && \
+    mkdir -p /home/shelfmark && \
+    chown 1000:1000 /home/shelfmark
+
 # Set working directory
 WORKDIR /app
 
-# Install Python dependencies using pip
-# Upgrade pip first, then copy requirements and install
-# Copying requirements-base.txt separately leverages build cache
-COPY requirements-base.txt .
-RUN pip install --no-cache-dir -r requirements-base.txt && \
-    # Clean root's pip cache
-    rm -rf /root/.cache
+# Install core Python dependencies first for better layer caching
+COPY pyproject.toml uv.lock ./
+RUN --mount=type=cache,target=/root/.cache/uv \
+    uv sync --locked --no-default-groups
+
+# Runtime dependencies are installed into /app/.venv during the build. Remove the
+# base image's system pip so stale installer CVEs do not ship in the final image.
+RUN rm -rf \
+        /usr/local/bin/pip \
+        /usr/local/bin/pip3 \
+        /usr/local/bin/pip3.* \
+        /usr/local/lib/python*/site-packages/pip \
+        /usr/local/lib/python*/site-packages/pip-*.dist-info
 
 # Copy application code *after* dependencies are installed
 COPY . .
 
-# Final setup: permissions and directories in one layer
-# Only creating directories and setting executable bits.
-# Ownership will be handled by the entrypoint script.
-RUN mkdir -p /var/log/cwa-book-downloader /cwa-book-ingest && \
-    chmod +x /app/entrypoint.sh /app/tor.sh /app/genDebug.sh
+# Copy built frontend from frontend-builder stage
+COPY --from=frontend-builder /frontend/dist /app/frontend-dist
+
+# Final setup: create image-owned runtime paths for the fixed non-root user.
+# Root/PUID mode still re-homes ownership at startup when needed.
+RUN mkdir -p \
+        /config \
+        /books \
+        /var/log/shelfmark \
+        /tmp/shelfmark/seleniumbase/downloaded_files \
+        /tmp/shelfmark/seleniumbase/archived_files && \
+    rm -rf /app/downloaded_files /app/archived_files && \
+    ln -s /tmp/shelfmark/seleniumbase/downloaded_files /app/downloaded_files && \
+    ln -s /tmp/shelfmark/seleniumbase/archived_files /app/archived_files && \
+    chown -R 1000:1000 /config /books /home/shelfmark /tmp/shelfmark /var/log/shelfmark && \
+    chmod -R a+rX /app && \
+    chmod +x /app/entrypoint.sh /app/tor.sh /app/wireguard.sh /app/genDebug.sh
 
 # Expose the application port
 EXPOSE ${FLASK_PORT}
 
 # Add healthcheck for container status
-# This will run as root initially, but check localhost which should work if the app binds correctly.
+# Uses /api/health which doesn't require authentication
 HEALTHCHECK --interval=60s --timeout=60s --start-period=60s --retries=3 \
-    CMD curl -s http://localhost:${FLASK_PORT}/request/api/status > /dev/null || exit 1
+    CMD curl -s http://localhost:${FLASK_PORT}/api/health > /dev/null || exit 1
 
 # Use dumb-init as the entrypoint to handle signals properly
 ENTRYPOINT ["/usr/bin/dumb-init", "--"]
 
 
-FROM base AS cwa-bd
+FROM base AS shelfmark
 
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends \
+# --- Chromium (PINNED to 149.0.7827.196) ---
+# Debian's chromium 150.0.7871.46-1~deb13u1 security update (trixie-security,
+# 2026-07-05) no longer opens the DevTools remote-debugging TCP port at all
+# (no listener, no DevToolsActivePort file, even with a custom --user-data-dir;
+# the RemoteDebuggingAllowed policy does not restore it). The SeleniumBase
+# Pure-CDP driver connects through that port (/json/version), so with 150 every
+# internal bypass dies with "Pure CDP browser startup failed" and all
+# CF-gated downloads fail. Install the last working version from
+# snapshot.debian.org until the bypasser can talk to Chromium >= 150 (e.g.
+# pipe-based DevTools / UC mode) or seleniumbase ships a fix.
+# Chrome 144+ requires --enable-unsafe-swiftshader for WebGL in Docker.
+# This flag is set in internal_bypasser.py _get_browser_args()
+ARG CHROMIUM_VERSION=149.0.7827.196-1~deb13u1
+ARG CHROMIUM_SNAPSHOT=20260704T000000Z
+
+RUN echo "deb [check-valid-until=no] https://snapshot.debian.org/archive/debian-security/${CHROMIUM_SNAPSHOT}/ trixie-security main" \
+        > /etc/apt/sources.list.d/chromium-pin-snapshot.list && \
+    apt-get update -o Acquire::Retries=5 && \
+    apt-get install -y --no-install-recommends -o Acquire::Retries=5 \
     # For dumb display
     xvfb \
     # For screen recording
     ffmpeg \
-    # --- Chromium ---
-    chromium \
-    # --- ChromeDriver ---
-    chromium-driver \
+    chromium=${CHROMIUM_VERSION} \
+    chromium-common=${CHROMIUM_VERSION} \
     # For tkinter (pyautogui)
-    python3-tk
-
-# install additional dependencies
-COPY requirements-cwa-bd.txt .
-RUN pip install --no-cache-dir -r requirements-cwa-bd.txt && \
-    # Clean root's pip cache
-    rm -rf /root/.cache
-
-# Add this line to grant read/execute permissions to others
-RUN chmod -R o+rx /usr/bin/chromium && \
-    chmod -R o+rx /usr/bin/chromedriver && \
-    chmod -R o+w /usr/local/lib/python3.10/site-packages/seleniumbase/drivers/
-
-# Default command to run the application entrypoint script
-CMD ["/app/entrypoint.sh"]
-
-FROM cwa-bd AS cwa-bd-tor
-
-ENV USING_TOR=true
-
-# Install Tor and dependencies
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends \
-    # --- Tor ---
-    tor \
-    # --- iptables ---
-    iptables && \
-    update-alternatives --set iptables /usr/sbin/iptables-legacy && \
-    update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy && \
-    # Cleanup APT cache *after* all installs in this layer
+    python3-tk \
+    # For RAR extraction
+    unrar-free && \
+    # Keep apt from "upgrading" chromium past the pin inside derived images
+    printf 'Package: chromium chromium-common\nPin: version %s\nPin-Priority: 1001\n' "${CHROMIUM_VERSION}" \
+        > /etc/apt/preferences.d/chromium-pin && \
+    rm /etc/apt/sources.list.d/chromium-pin-snapshot.list && \
+    # Create symlink so rarfile library can find unrar
+    ln -sf /usr/bin/unrar-free /usr/bin/unrar && \
+    # Cleanup APT cache
     apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false && \
     apt-get clean && \
     rm -rf /var/lib/apt/lists/*
 
-# Override the default command to run Tor
+# Install the browser automation stack used by the full image
+RUN --mount=type=cache,target=/root/.cache/uv \
+    uv sync --locked --no-default-groups --extra browser
+
+# Deterministically resolve the Xlib namespace collision.
+# pyautogui/mouseinfo pull the stale `python3-xlib` (0.15, 2014), while the
+# `--extra browser` set pulls `python-xlib` (0.33). Both packages install into
+# the same top-level `Xlib/` namespace, so whichever lands last wins. When the
+# 2014 build wins, `Xlib.X` is missing `FamilyServerInterpreted`, which the
+# SeleniumBase Pure-CDP driver requires at browser startup -> every bypass fails
+# with "module 'Xlib.X' has no attribute 'FamilyServerInterpreted'" and no
+# Cloudflare/DDoS-Guard protected download can complete. Drop the stale package
+# and force python-xlib 0.33 to own the namespace. pyautogui runs fine against
+# 0.33 (superset API).
+RUN --mount=type=cache,target=/root/.cache/uv \
+    uv pip uninstall --python /app/.venv/bin/python python3-xlib && \
+    uv pip install --python /app/.venv/bin/python --reinstall python-xlib==0.33 && \
+    /app/.venv/bin/python -c "import Xlib.X; assert hasattr(Xlib.X, 'FamilyServerInterpreted'), 'Xlib.X.FamilyServerInterpreted missing after fix'; print('Xlib namespace OK:', Xlib.__version__)"
+
+# uv is only needed while building the image.
+RUN rm -f /usr/bin/uv /usr/bin/uvx
+
+# Keep SeleniumBase's bundled driver cache writable for the fixed non-root user.
+RUN SELENIUMBASE_DRIVERS_DIR=$(/app/.venv/bin/python -c "import pathlib, seleniumbase; print(pathlib.Path(seleniumbase.__file__).resolve().parent / 'drivers')") && \
+    chown -R 1000:1000 "${SELENIUMBASE_DRIVERS_DIR}" && \
+    chmod -R u+rwX,go+rX "${SELENIUMBASE_DRIVERS_DIR}" && \
+    if [ -f "${SELENIUMBASE_DRIVERS_DIR}/uc_driver" ]; then chmod +x "${SELENIUMBASE_DRIVERS_DIR}/uc_driver"; fi
+
+# Grant read/execute permissions to others
+RUN chmod -R o+rx /usr/bin/chromium
+
+# Default command to run the application entrypoint script
 CMD ["/app/entrypoint.sh"]
 
-FROM base AS cwa-bd-extbp
+FROM base AS shelfmark-lite
 
 ENV USING_EXTERNAL_BYPASSER=true
 
+# uv is only needed while building the image.
+RUN rm -f /usr/bin/uv /usr/bin/uvx
+
 CMD ["/app/entrypoint.sh"]

Makefile

@@ -0,0 +1,217 @@
+.PHONY: help install install-ci install-python-dev dev build preview frontend-typecheck frontend-lint frontend-format frontend-format-fix frontend-checks frontend-test clean up down docker-build refresh restart build-serve python-lint python-lint-fix python-format python-format-fix python-typecheck python-dead-code python-checks python-test python-test-cov e2e-platform e2e-platform-profile e2e-platform-matrix e2e-platform-full e2e-platform-build checks fix
+
+# Frontend directory
+FRONTEND_DIR := src/frontend
+
+# Docker compose file
+COMPOSE_FILE := docker-compose.dev.yml
+
+# Default target
+help:
+	@echo "Available targets:"
+	@echo ""
+	@echo "Quality:"
+	@echo "  checks     - Run ALL static analysis checks (frontend + Python)"
+	@echo "  fix        - Auto-fix lint + format issues (frontend + Python)"
+	@echo ""
+	@echo "Frontend:"
+	@echo "  install    - Install frontend dependencies"
+	@echo "  dev        - Start development server"
+	@echo "  build      - Build frontend for production"
+	@echo "  build-serve - Build and serve via Flask (test prod build without Docker)"
+	@echo "  preview    - Preview production build"
+	@echo "  frontend-typecheck - Run TypeScript type checking"
+	@echo "  frontend-lint - Run Oxlint against frontend code"
+	@echo "  frontend-format - Check frontend formatting with Oxfmt"
+	@echo "  frontend-format-fix - Format frontend code with Oxfmt"
+	@echo "  frontend-checks - Run all frontend static analysis checks"
+	@echo "  frontend-test - Run frontend unit tests"
+	@echo ""
+	@echo "Python:"
+	@echo "  install-python-dev - Sync Python runtime + dev tooling with uv"
+	@echo "  python-lint - Run Ruff against Python code (backend + tests)"
+	@echo "  python-lint-fix - Run Ruff with safe auto-fixes"
+	@echo "  python-format - Check Python formatting with Ruff"
+	@echo "  python-format-fix - Format Python code with Ruff"
+	@echo "  python-typecheck - Run BasedPyright against backend + tests"
+	@echo "  python-dead-code - Run Vulture against backend code"
+	@echo "  python-checks - Run all Python static analysis checks"
+	@echo "  python-test - Run unit tests"
+	@echo "  python-test-cov - Run unit tests with coverage report"
+	@echo "  e2e-platform - Run e2e docker platform (baseline profile)"
+	@echo "  e2e-platform-profile PROFILE=<name> - Run e2e platform for one profile"
+	@echo "  e2e-platform-matrix - Run e2e platform across all config profiles"
+	@echo "  e2e-platform-full - Run heavy 'full' profile (real Chrome bypasser + DoH + real qBittorrent)"
+	@echo "  clean      - Remove node_modules and build artifacts"
+	@echo ""
+	@echo "Backend (Docker):"
+	@echo "  up         - Start backend services"
+	@echo "  down       - Stop backend services"
+	@echo "  restart    - Restart backend services (no rebuild)"
+	@echo "  docker-build - Build Docker image"
+	@echo "  refresh    - Rebuild and restart backend services"
+
+# Install dependencies
+install:
+	@echo "Installing frontend dependencies..."
+	cd $(FRONTEND_DIR) && npm install
+
+install-ci:
+	@echo "Installing frontend dependencies (CI, lockfile-strict)..."
+	cd $(FRONTEND_DIR) && npm ci
+
+# Install Python development dependencies
+install-python-dev:
+	@echo "Syncing Python runtime and dev tooling with uv..."
+	uv sync --locked --extra browser
+	@echo "Installing prek git hooks..."
+	uv run prek install
+
+# Start development server
+dev:
+	@echo "Starting development server..."
+	cd $(FRONTEND_DIR) && npm run dev
+
+# Build for production
+build:
+	@echo "Building frontend for production..."
+	cd $(FRONTEND_DIR) && npm run build
+
+# Build frontend and sync to frontend-dist for the running container to serve
+build-serve: build
+	@echo "Syncing build to frontend-dist..."
+	@mkdir -p frontend-dist
+	rsync -a --delete $(FRONTEND_DIR)/dist/ frontend-dist/
+	@echo "Done. Hit the Flask backend (port 8084) to test the production build."
+
+# Preview production build
+preview:
+	@echo "Previewing production build..."
+	cd $(FRONTEND_DIR) && npm run preview
+
+# Type checking
+frontend-typecheck:
+	@echo "Running TypeScript type checking..."
+	cd $(FRONTEND_DIR) && npm run typecheck
+
+# Python linting (backend + tests)
+python-lint:
+	@echo "Running Ruff..."
+	uv run ruff check shelfmark tests
+
+python-lint-fix:
+	@echo "Running Ruff with safe auto-fixes..."
+	uv run ruff check shelfmark tests --fix
+
+python-format:
+	@echo "Checking Python formatting with Ruff..."
+	uv run ruff format --check shelfmark tests
+
+python-format-fix:
+	@echo "Formatting Python code with Ruff..."
+	uv run ruff format shelfmark tests
+
+python-typecheck:
+	@echo "Running BasedPyright..."
+	uv run basedpyright
+	@echo "Running BasedPyright against tests..."
+	uv run basedpyright tests --skipunannotated
+
+python-dead-code:
+	@echo "Running Vulture..."
+	uv run vulture shelfmark
+
+python-checks: python-lint python-format python-typecheck python-dead-code
+
+python-test:
+	@echo "Running tests..."
+	uv run pytest tests/ -x --tb=short -m "not integration and not e2e"
+
+python-test-cov:
+	@echo "Running tests with coverage..."
+	uv run pytest tests/ -x --tb=short -m "not integration and not e2e" --cov --cov-report=term-missing
+
+# E2E docker platform: hermetic stack (mock AA/Cloudflare/bypasser/DNS/proxy/Tor)
+# exercised across config profiles. See tests/e2e/platform/README.md.
+E2E_PLATFORM_DIR := tests/e2e/platform
+
+e2e-platform:
+	@echo "Running e2e platform (baseline profile)..."
+	cd $(E2E_PLATFORM_DIR) && ./run-e2e.sh env/baseline.env
+
+e2e-platform-profile:
+	@echo "Running e2e platform (profile=$(PROFILE))..."
+	cd $(E2E_PLATFORM_DIR) && ./run-e2e.sh env/$(PROFILE).env
+
+e2e-platform-matrix:
+	@echo "Running e2e platform matrix (all profiles)..."
+	cd $(E2E_PLATFORM_DIR) && ./run-matrix.sh
+
+e2e-platform-build:
+	@echo "Pre-building e2e platform images once (reused across profiles)..."
+	cd $(E2E_PLATFORM_DIR) && ./build-images.sh
+
+e2e-platform-full:
+	@echo "Running e2e platform FULL profile (real Chrome bypasser + DoH + real qBittorrent)..."
+	cd $(E2E_PLATFORM_DIR) && ./run-e2e.sh env/full.env
+
+# Frontend linting
+frontend-lint:
+	@echo "Running Oxlint..."
+	cd $(FRONTEND_DIR) && npm run lint
+
+# Frontend formatting
+frontend-format:
+	@echo "Checking frontend formatting with Oxfmt..."
+	cd $(FRONTEND_DIR) && npm run format:check
+
+frontend-format-fix:
+	@echo "Formatting frontend code with Oxfmt..."
+	cd $(FRONTEND_DIR) && npm run format
+
+# All frontend static analysis
+frontend-checks: frontend-lint frontend-format frontend-typecheck
+
+# Run frontend unit tests
+frontend-test:
+	@echo "Running frontend unit tests..."
+	cd $(FRONTEND_DIR) && npm run test:unit
+
+# All static analysis checks (frontend + Python)
+checks: frontend-checks python-checks
+
+# Auto-fix lint + format issues (frontend + Python)
+fix: python-lint-fix python-format-fix frontend-format-fix
+
+# Clean build artifacts and dependencies
+clean:
+	@echo "Cleaning build artifacts and dependencies..."
+	rm -rf $(FRONTEND_DIR)/node_modules
+	rm -rf $(FRONTEND_DIR)/dist
+
+# Start backend services
+up:
+	@echo "Starting backend services..."
+	docker compose -f $(COMPOSE_FILE) up -d
+
+# Stop backend services
+down:
+	@echo "Stopping backend services..."
+	docker compose -f $(COMPOSE_FILE) down
+
+# Build Docker image
+docker-build:
+	@echo "Building Docker image..."
+	docker compose -f $(COMPOSE_FILE) build
+
+# Restart backend services (no rebuild)
+restart:
+	@echo "Restarting backend services..."
+	docker compose -f $(COMPOSE_FILE) restart
+
+# Rebuild and restart backend services
+refresh:
+	@echo "Rebuilding and restarting backend services..."
+	docker compose -f $(COMPOSE_FILE) down
+	docker compose -f $(COMPOSE_FILE) build
+	docker compose -f $(COMPOSE_FILE) up -d

app.py

@@ -1,542 +0,0 @@
-"""Flask web application for book download service with URL rewrite support."""
-
-import logging
-import io, re, os
-import sqlite3
-from functools import wraps
-from flask import Flask, request, jsonify, render_template, send_file, send_from_directory
-from werkzeug.middleware.proxy_fix import ProxyFix
-from werkzeug.security import check_password_hash
-from werkzeug.wrappers import Response
-from flask import url_for as flask_url_for
-import typing
-
-from logger import setup_logger
-from config import _SUPPORTED_BOOK_LANGUAGE, BOOK_LANGUAGE, SUPPORTED_FORMATS
-from env import FLASK_HOST, FLASK_PORT, APP_ENV, CWA_DB_PATH, DEBUG, USING_EXTERNAL_BYPASSER, BUILD_VERSION, RELEASE_VERSION
-import backend
-
-from models import SearchFilters
-
-logger = setup_logger(__name__)
-app = Flask(__name__)
-app.wsgi_app = ProxyFix(app.wsgi_app)  # type: ignore
-app.config['SEND_FILE_MAX_AGE_DEFAULT'] = 0  # Disable caching
-app.config['APPLICATION_ROOT'] = '/'
-
-# Flask logger
-app.logger.handlers = logger.handlers
-app.logger.setLevel(logger.level)
-# Also handle Werkzeug's logger
-werkzeug_logger = logging.getLogger('werkzeug')
-werkzeug_logger.handlers = logger.handlers
-werkzeug_logger.setLevel(logger.level)
-
-# Set up authentication defaults
-# The secret key will reset every time we restart, which will
-# require users to authenticate again
-app.config.update(
-    SECRET_KEY = os.urandom(64)
-)
-
-def login_required(f):
-    @wraps(f)
-    def decorated_function(*args, **kwargs):
-        # If the CWA_DB_PATH variable exists, but isn't a valid
-        # path, return a server error
-        if CWA_DB_PATH is not None and not os.path.isfile(CWA_DB_PATH):
-            logger.error(f"CWA_DB_PATH is set to {CWA_DB_PATH} but this is not a valid path")
-            return Response("Internal Server Error", 500)
-        if not authenticate():
-            return Response(
-                response="Unauthorized",
-                status=401,
-                headers={
-                    "WWW-Authenticate": 'Basic realm="Calibre-Web-Automated-Book-Downloader"',
-                },
-            )
-        return f(*args, **kwargs)
-    return decorated_function
-
-def register_dual_routes(app : Flask) -> None:
-    """
-    Register each route both with and without the /request prefix.
-    This function should be called after all routes are defined.
-    """
-    # Store original url_map rules
-    rules = list(app.url_map.iter_rules())
-    
-    # Add /request prefix to each rule
-    for rule in rules:
-        if rule.rule != '/request/' and rule.rule != '/request':  # Skip if it's already a request route
-            # Create new routes with /request prefix, both with and without trailing slash
-            base_rule = rule.rule[:-1] if rule.rule.endswith('/') else rule.rule
-            if base_rule == '':  # Special case for root path
-                app.add_url_rule('/request', f"root_request", 
-                               view_func=app.view_functions[rule.endpoint],
-                               methods=rule.methods)
-                app.add_url_rule('/request/', f"root_request_slash", 
-                               view_func=app.view_functions[rule.endpoint],
-                               methods=rule.methods)
-            else:
-                app.add_url_rule(f"/request{base_rule}", 
-                               f"{rule.endpoint}_request",
-                               view_func=app.view_functions[rule.endpoint],
-                               methods=rule.methods)
-                app.add_url_rule(f"/request{base_rule}/", 
-                               f"{rule.endpoint}_request_slash",
-                               view_func=app.view_functions[rule.endpoint],
-                               methods=rule.methods)
-    app.jinja_env.globals['url_for'] = url_for_with_request
-
-def url_for_with_request(endpoint : str, **values : typing.Any) -> str:
-    """Generate URLs with /request prefix by default."""
-    if endpoint == 'static':
-        # For static files, add /request prefix
-        url = flask_url_for(endpoint, **values)
-        return f"/request{url}"
-    return flask_url_for(endpoint, **values)
-
-@app.route('/')
-@login_required
-def index() -> str:
-    """
-    Render main page with search and status table.
-    """
-    return render_template('index.html', 
-                           book_languages=_SUPPORTED_BOOK_LANGUAGE, 
-                           default_language=BOOK_LANGUAGE, 
-                           supported_formats=SUPPORTED_FORMATS,
-                           debug=DEBUG,
-                           build_version=BUILD_VERSION,
-                           release_version=RELEASE_VERSION,
-                           app_env=APP_ENV
-                           )
-
- 
-
-@app.route('/favico<path:_>')
-@app.route('/request/favico<path:_>')
-@app.route('/request/static/favico<path:_>')
-def favicon(_ : typing.Any) -> Response:
-    return send_from_directory(os.path.join(app.root_path, 'static', 'media'),
-        'favicon.ico', mimetype='image/vnd.microsoft.icon')
-
-from typing import Union, Tuple
-
-if DEBUG:
-    import subprocess
-    import time
-    if USING_EXTERNAL_BYPASSER:
-        STOP_GUI = lambda: None  # No-op for external bypasser
-    else:
-        from cloudflare_bypasser import _reset_driver as STOP_GUI
-    @app.route('/debug', methods=['GET'])
-    @login_required
-    def debug() -> Union[Response, Tuple[Response, int]]:
-        """
-        This will run the /app/debug.sh script, which will generate a debug zip with all the logs
-        The file will be named /tmp/cwa-book-downloader-debug.zip
-        And then return it to the user
-        """
-        try:
-            # Run the debug script
-            STOP_GUI()
-            time.sleep(1)
-            result = subprocess.run(['/app/genDebug.sh'], capture_output=True, text=True, check=True)
-            if result.returncode != 0:
-                raise Exception(f"Debug script failed: {result.stderr}")
-            logger.info(f"Debug script executed: {result.stdout}")
-            debug_file_path = result.stdout.strip().split('\n')[-1]
-            if not os.path.exists(debug_file_path):
-                logger.error("Debug zip file not found after running debug script")
-                return jsonify({"error": "Failed to generate debug information"}), 500
-                
-            # Return the file to the user
-            return send_file(
-                debug_file_path,
-                mimetype='application/zip',
-                download_name=os.path.basename(debug_file_path),
-                as_attachment=True
-            )
-        except subprocess.CalledProcessError as e:
-            logger.error_trace(f"Debug script error: {e}, stdout: {e.stdout}, stderr: {e.stderr}")
-            return jsonify({"error": f"Debug script failed: {e.stderr}"}), 500
-        except Exception as e:
-            logger.error_trace(f"Debug endpoint error: {e}")
-            return jsonify({"error": str(e)}), 500
-
-if DEBUG:
-    @app.route('/api/restart', methods=['GET'])
-    @login_required
-    def restart() -> Union[Response, Tuple[Response, int]]:
-        """
-        Restart the application
-        """
-        os._exit(0)
-
-@app.route('/api/search', methods=['GET'])
-@login_required
-def api_search() -> Union[Response, Tuple[Response, int]]:
-    """
-    Search for books matching the provided query.
-
-    Query Parameters:
-        query (str): Search term (ISBN, title, author, etc.)
-        isbn (str): Book ISBN
-        author (str): Book Author
-        title (str): Book Title
-        lang (str): Book Language
-        sort (str): Order to sort results
-        content (str): Content type of book
-        format (str): File format filter (pdf, epub, mobi, azw3, fb2, djvu, cbz, cbr)
-
-    Returns:
-        flask.Response: JSON array of matching books or error response.
-    """
-    query = request.args.get('query', '')
-
-    filters = SearchFilters(
-        isbn = request.args.getlist('isbn'),
-        author = request.args.getlist('author'),
-        title = request.args.getlist('title'),
-        lang = request.args.getlist('lang'),
-        sort = request.args.get('sort'),
-        content = request.args.getlist('content'),
-        format = request.args.getlist('format'),
-    )
-
-    if not query and not any(vars(filters).values()):
-        return jsonify([])
-
-    try:
-        books = backend.search_books(query, filters)
-        return jsonify(books)
-    except Exception as e:
-        logger.error_trace(f"Search error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/info', methods=['GET'])
-@login_required
-def api_info() -> Union[Response, Tuple[Response, int]]:
-    """
-    Get detailed book information.
-
-    Query Parameters:
-        id (str): Book identifier (MD5 hash)
-
-    Returns:
-        flask.Response: JSON object with book details, or an error message.
-    """
-    book_id = request.args.get('id', '')
-    if not book_id:
-        return jsonify({"error": "No book ID provided"}), 400
-
-    try:
-        book = backend.get_book_info(book_id)
-        if book:
-            return jsonify(book)
-        return jsonify({"error": "Book not found"}), 404
-    except Exception as e:
-        logger.error_trace(f"Info error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/download', methods=['GET'])
-@login_required
-def api_download() -> Union[Response, Tuple[Response, int]]:
-    """
-    Queue a book for download.
-
-    Query Parameters:
-        id (str): Book identifier (MD5 hash)
-
-    Returns:
-        flask.Response: JSON status object indicating success or failure.
-    """
-    book_id = request.args.get('id', '')
-    if not book_id:
-        return jsonify({"error": "No book ID provided"}), 400
-
-    try:
-        priority = int(request.args.get('priority', 0))
-        success = backend.queue_book(book_id, priority)
-        if success:
-            return jsonify({"status": "queued", "priority": priority})
-        return jsonify({"error": "Failed to queue book"}), 500
-    except Exception as e:
-        logger.error_trace(f"Download error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/status', methods=['GET'])
-@login_required
-def api_status() -> Union[Response, Tuple[Response, int]]:
-    """
-    Get current download queue status.
-
-    Returns:
-        flask.Response: JSON object with queue status.
-    """
-    try:
-        status = backend.queue_status()
-        return jsonify(status)
-    except Exception as e:
-        logger.error_trace(f"Status error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/localdownload', methods=['GET'])
-@login_required
-def api_local_download() -> Union[Response, Tuple[Response, int]]:
-    """
-    Download an EPUB file from local storage if available.
-
-    Query Parameters:
-        id (str): Book identifier (MD5 hash)
-
-    Returns:
-        flask.Response: The EPUB file if found, otherwise an error response.
-    """
-    book_id = request.args.get('id', '')
-    if not book_id:
-        return jsonify({"error": "No book ID provided"}), 400
-
-    try:
-        file_data, book_info = backend.get_book_data(book_id)
-        if file_data is None:
-            # Book data not found or not available
-            return jsonify({"error": "File not found"}), 404
-        # Santize the file name
-        file_name = book_info.title
-        file_name = re.sub(r'[\\/:*?"<>|]', '_', file_name.strip())[:245]
-        file_extension = book_info.format
-        # Prepare the file for sending to the client
-        data = io.BytesIO(file_data)
-        return send_file(
-            data,
-            download_name=f"{file_name}.{file_extension}",
-            as_attachment=True
-        )
-
-    except Exception as e:
-        logger.error_trace(f"Local download error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/download/<book_id>/cancel', methods=['DELETE'])
-@login_required
-def api_cancel_download(book_id: str) -> Union[Response, Tuple[Response, int]]:
-    """
-    Cancel a download.
-
-    Path Parameters:
-        book_id (str): Book identifier to cancel
-
-    Returns:
-        flask.Response: JSON status indicating success or failure.
-    """
-    try:
-        success = backend.cancel_download(book_id)
-        if success:
-            return jsonify({"status": "cancelled", "book_id": book_id})
-        return jsonify({"error": "Failed to cancel download or book not found"}), 404
-    except Exception as e:
-        logger.error_trace(f"Cancel download error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/queue/<book_id>/priority', methods=['PUT'])
-@login_required
-def api_set_priority(book_id: str) -> Union[Response, Tuple[Response, int]]:
-    """
-    Set priority for a queued book.
-
-    Path Parameters:
-        book_id (str): Book identifier
-
-    Request Body:
-        priority (int): New priority level (lower number = higher priority)
-
-    Returns:
-        flask.Response: JSON status indicating success or failure.
-    """
-    try:
-        data = request.get_json()
-        if not data or 'priority' not in data:
-            return jsonify({"error": "Priority not provided"}), 400
-            
-        priority = int(data['priority'])
-        success = backend.set_book_priority(book_id, priority)
-        
-        if success:
-            return jsonify({"status": "updated", "book_id": book_id, "priority": priority})
-        return jsonify({"error": "Failed to update priority or book not found"}), 404
-    except ValueError:
-        return jsonify({"error": "Invalid priority value"}), 400
-    except Exception as e:
-        logger.error_trace(f"Set priority error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/queue/reorder', methods=['POST'])
-@login_required
-def api_reorder_queue() -> Union[Response, Tuple[Response, int]]:
-    """
-    Bulk reorder queue by setting new priorities.
-
-    Request Body:
-        book_priorities (dict): Mapping of book_id to new priority
-
-    Returns:
-        flask.Response: JSON status indicating success or failure.
-    """
-    try:
-        data = request.get_json()
-        if not data or 'book_priorities' not in data:
-            return jsonify({"error": "book_priorities not provided"}), 400
-            
-        book_priorities = data['book_priorities']
-        if not isinstance(book_priorities, dict):
-            return jsonify({"error": "book_priorities must be a dictionary"}), 400
-            
-        # Validate all priorities are integers
-        for book_id, priority in book_priorities.items():
-            if not isinstance(priority, int):
-                return jsonify({"error": f"Invalid priority for book {book_id}"}), 400
-                
-        success = backend.reorder_queue(book_priorities)
-        
-        if success:
-            return jsonify({"status": "reordered", "updated_count": len(book_priorities)})
-        return jsonify({"error": "Failed to reorder queue"}), 500
-    except Exception as e:
-        logger.error_trace(f"Reorder queue error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/queue/order', methods=['GET'])
-@login_required
-def api_queue_order() -> Union[Response, Tuple[Response, int]]:
-    """
-    Get current queue order for display.
-
-    Returns:
-        flask.Response: JSON array of queued books with their order and priorities.
-    """
-    try:
-        queue_order = backend.get_queue_order()
-        return jsonify({"queue": queue_order})
-    except Exception as e:
-        logger.error_trace(f"Queue order error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/downloads/active', methods=['GET'])
-@login_required
-def api_active_downloads() -> Union[Response, Tuple[Response, int]]:
-    """
-    Get list of currently active downloads.
-
-    Returns:
-        flask.Response: JSON array of active download book IDs.
-    """
-    try:
-        active_downloads = backend.get_active_downloads()
-        return jsonify({"active_downloads": active_downloads})
-    except Exception as e:
-        logger.error_trace(f"Active downloads error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.route('/api/queue/clear', methods=['DELETE'])
-@login_required
-def api_clear_completed() -> Union[Response, Tuple[Response, int]]:
-    """
-    Clear all completed, errored, or cancelled books from tracking.
-
-    Returns:
-        flask.Response: JSON with count of removed books.
-    """
-    try:
-        removed_count = backend.clear_completed()
-        return jsonify({"status": "cleared", "removed_count": removed_count})
-    except Exception as e:
-        logger.error_trace(f"Clear completed error: {e}")
-        return jsonify({"error": str(e)}), 500
-
-@app.errorhandler(404)
-def not_found_error(error: Exception) -> Union[Response, Tuple[Response, int]]:
-    """
-    Handle 404 (Not Found) errors.
-
-    Args:
-        error (HTTPException): The 404 error raised by Flask.
-
-    Returns:
-        flask.Response: JSON error message with 404 status.
-    """
-    logger.warning(f"404 error: {request.url} : {error}")
-    return jsonify({"error": "Resource not found"}), 404
-
-@app.errorhandler(500)
-def internal_error(error: Exception) -> Union[Response, Tuple[Response, int]]:
-    """
-    Handle 500 (Internal Server) errors.
-
-    Args:
-        error (HTTPException): The 500 error raised by Flask.
-
-    Returns:
-        flask.Response: JSON error message with 500 status.
-    """
-    logger.error_trace(f"500 error: {error}")
-    return jsonify({"error": "Internal server error"}), 500
-
-def authenticate() -> bool:
-    """
-    Helper function that validates Basic credentials
-    against a Calibre-Web app.db SQLite database
-
-    Database structure:
-    - Table 'user' with columns: 'name' (username), 'password'
-    """
-
-    # If the database doesn't exist, the user is always authenticated
-    if not CWA_DB_PATH:
-        return True
-
-    # If no authorization object exists, return false to prompt
-    # a request to the user
-    if not request.authorization:
-        return False
-
-    username = request.authorization.get("username")
-    password = request.authorization.get("password")
-
-    # Validate credentials against database
-    try:
-        # Open database in true read-only mode to avoid journal/WAL writes on RO mounts
-        db_path = os.fspath(CWA_DB_PATH)
-        db_uri = f"file:{db_path}?mode=ro&immutable=1"
-        conn = sqlite3.connect(db_uri, uri=True)
-        cur = conn.cursor()
-        cur.execute("SELECT password FROM user WHERE name = ?", (username,))
-        row = cur.fetchone()
-        conn.close()
-
-        # Check if user exists and password is correct
-        if not row or not row[0] or not check_password_hash(row[0], password):
-            logger.error("User not found or password check failed")
-            return False
-
-    except Exception as e:
-        logger.error_trace(f"CWA DB or authentication send_from_directory: {e}")
-        return False
-
-    logger.info(f"Authentication successful for user {username}")
-    return True
-
-# Register all routes with /request prefix
-register_dual_routes(app)
-
-logger.log_resource_usage()
-
-if __name__ == '__main__':
-    logger.info(f"Starting Flask application on {FLASK_HOST}:{FLASK_PORT} IN {APP_ENV} mode")
-    app.run(
-        host=FLASK_HOST,
-        port=FLASK_PORT,
-        debug=DEBUG 
-    )

backend.py

@@ -1,336 +0,0 @@
-"""Backend logic for the book download application."""
-
-import threading, time
-import shutil
-from pathlib import Path
-from typing import Dict, List, Optional, Any, Tuple
-import subprocess
-import os
-from concurrent.futures import ThreadPoolExecutor, Future
-from threading import Event
-
-from logger import setup_logger
-from config import CUSTOM_SCRIPT
-from env import INGEST_DIR, TMP_DIR, MAIN_LOOP_SLEEP_TIME, USE_BOOK_TITLE, MAX_CONCURRENT_DOWNLOADS, DOWNLOAD_PROGRESS_UPDATE_INTERVAL
-from models import book_queue, BookInfo, QueueStatus, SearchFilters
-import book_manager
-
-logger = setup_logger(__name__)
-
-def _sanitize_filename(filename: str) -> str:
-    """Sanitize a filename by replacing spaces with underscores and removing invalid characters."""
-    keepcharacters = (' ','.','_')
-    return "".join(c for c in filename if c.isalnum() or c in keepcharacters).rstrip()
-
-def search_books(query: str, filters: SearchFilters) -> List[Dict[str, Any]]:
-    """Search for books matching the query.
-    
-    Args:
-        query: Search term
-        filters: Search filters object
-        
-    Returns:
-        List[Dict]: List of book information dictionaries
-    """
-    try:
-        books = book_manager.search_books(query, filters)
-        return [_book_info_to_dict(book) for book in books]
-    except Exception as e:
-        logger.error_trace(f"Error searching books: {e}")
-        return []
-
-def get_book_info(book_id: str) -> Optional[Dict[str, Any]]:
-    """Get detailed information for a specific book.
-    
-    Args:
-        book_id: Book identifier
-        
-    Returns:
-        Optional[Dict]: Book information dictionary if found
-    """
-    try:
-        book = book_manager.get_book_info(book_id)
-        return _book_info_to_dict(book)
-    except Exception as e:
-        logger.error_trace(f"Error getting book info: {e}")
-        return None
-
-def queue_book(book_id: str, priority: int = 0) -> bool:
-    """Add a book to the download queue with specified priority.
-    
-    Args:
-        book_id: Book identifier
-        priority: Priority level (lower number = higher priority)
-        
-    Returns:
-        bool: True if book was successfully queued
-    """
-    try:
-        book_info = book_manager.get_book_info(book_id)
-        book_queue.add(book_id, book_info, priority)
-        logger.info(f"Book queued with priority {priority}: {book_info.title}")
-        return True
-    except Exception as e:
-        logger.error_trace(f"Error queueing book: {e}")
-        return False
-
-def queue_status() -> Dict[str, Dict[str, Any]]:
-    """Get current status of the download queue.
-    
-    Returns:
-        Dict: Queue status organized by status type
-    """
-    status = book_queue.get_status()
-    for _, books in status.items():
-        for _, book_info in books.items():
-            if book_info.download_path:
-                if not os.path.exists(book_info.download_path):
-                    book_info.download_path = None
-
-    # Convert Enum keys to strings and properly format the response
-    return {
-        status_type.value: books
-        for status_type, books in status.items()
-    }
-
-def get_book_data(book_id: str) -> Tuple[Optional[bytes], BookInfo]:
-    """Get book data for a specific book, including its title.
-    
-    Args:
-        book_id: Book identifier
-        
-    Returns:
-        Tuple[Optional[bytes], str]: Book data if available, and the book title
-    """
-    try:
-        book_info = book_queue._book_data[book_id]
-        path = book_info.download_path
-        with open(path, "rb") as f:
-            return f.read(), book_info
-    except Exception as e:
-        logger.error_trace(f"Error getting book data: {e}")
-        if book_info:
-            book_info.download_path = None
-        return None, book_info if book_info else BookInfo(id=book_id, title="Unknown")
-
-def _book_info_to_dict(book: BookInfo) -> Dict[str, Any]:
-    """Convert BookInfo object to dictionary representation."""
-    return {
-        key: value for key, value in book.__dict__.items()
-        if value is not None
-    }
-
-def _download_book_with_cancellation(book_id: str, cancel_flag: Event) -> Optional[str]:
-    """Download and process a book with cancellation support.
-    
-    Args:
-        book_id: Book identifier
-        cancel_flag: Threading event to signal cancellation
-        
-    Returns:
-        str: Path to the downloaded book if successful, None otherwise
-    """
-    try:
-        # Check for cancellation before starting
-        if cancel_flag.is_set():
-            logger.info(f"Download cancelled before starting: {book_id}")
-            return None
-            
-        book_info = book_queue._book_data[book_id]
-        logger.info(f"Starting download: {book_info.title}")
-
-        if USE_BOOK_TITLE:
-            book_name = _sanitize_filename(book_info.title)
-        else:
-            book_name = book_id
-        book_name += f".{book_info.format}"
-        book_path = TMP_DIR / book_name
-
-        # Check cancellation before download
-        if cancel_flag.is_set():
-            logger.info(f"Download cancelled before book manager call: {book_id}")
-            return None
-        
-        progress_callback = lambda progress: update_download_progress(book_id, progress)
-        success = book_manager.download_book(book_info, book_path, progress_callback, cancel_flag)
-        
-        # Stop progress updates
-        cancel_flag.wait(0.1)  # Brief pause for progress thread cleanup
-        
-        if cancel_flag.is_set():
-            logger.info(f"Download cancelled during download: {book_id}")
-            # Clean up partial download
-            if book_path.exists():
-                book_path.unlink()
-            return None
-            
-        if not success:
-            raise Exception("Unknown error downloading book")
-
-        # Check cancellation before post-processing
-        if cancel_flag.is_set():
-            logger.info(f"Download cancelled before post-processing: {book_id}")
-            if book_path.exists():
-                book_path.unlink()
-            return None
-
-        if CUSTOM_SCRIPT:
-            logger.info(f"Running custom script: {CUSTOM_SCRIPT}")
-            subprocess.run([CUSTOM_SCRIPT, book_path])
-            
-        intermediate_path = INGEST_DIR / f"{book_id}.crdownload"
-        final_path = INGEST_DIR / book_name
-        
-        if os.path.exists(book_path):
-            logger.info(f"Moving book to ingest directory: {book_path} -> {final_path}")
-            try:
-                shutil.move(book_path, intermediate_path)
-            except Exception as e:
-                try:
-                    logger.debug(f"Error moving book: {e}, will try copying instead")
-                    shutil.move(book_path, intermediate_path)
-                except Exception as e:
-                    logger.debug(f"Error copying book: {e}, will try copying without permissions instead")
-                    shutil.copyfile(book_path, intermediate_path)
-                os.remove(book_path)
-            
-            # Final cancellation check before completing
-            if cancel_flag.is_set():
-                logger.info(f"Download cancelled before final rename: {book_id}")
-                if intermediate_path.exists():
-                    intermediate_path.unlink()
-                return None
-                
-            os.rename(intermediate_path, final_path)
-            logger.info(f"Download completed successfully: {book_info.title}")
-            
-        return str(final_path)
-    except Exception as e:
-        if cancel_flag.is_set():
-            logger.info(f"Download cancelled during error handling: {book_id}")
-        else:
-            logger.error_trace(f"Error downloading book: {e}")
-        return None
-
-def update_download_progress(book_id: str, progress: float) -> None:
-    """Update download progress."""
-    book_queue.update_progress(book_id, progress)
-
-def cancel_download(book_id: str) -> bool:
-    """Cancel a download.
-    
-    Args:
-        book_id: Book identifier to cancel
-        
-    Returns:
-        bool: True if cancellation was successful
-    """
-    return book_queue.cancel_download(book_id)
-
-def set_book_priority(book_id: str, priority: int) -> bool:
-    """Set priority for a queued book.
-    
-    Args:
-        book_id: Book identifier
-        priority: New priority level (lower = higher priority)
-        
-    Returns:
-        bool: True if priority was successfully changed
-    """
-    return book_queue.set_priority(book_id, priority)
-
-def reorder_queue(book_priorities: Dict[str, int]) -> bool:
-    """Bulk reorder queue.
-    
-    Args:
-        book_priorities: Dict mapping book_id to new priority
-        
-    Returns:
-        bool: True if reordering was successful
-    """
-    return book_queue.reorder_queue(book_priorities)
-
-def get_queue_order() -> List[Dict[str, any]]:
-    """Get current queue order for display."""
-    return book_queue.get_queue_order()
-
-def get_active_downloads() -> List[str]:
-    """Get list of currently active downloads."""
-    return book_queue.get_active_downloads()
-
-def clear_completed() -> int:
-    """Clear all completed downloads from tracking."""
-    return book_queue.clear_completed()
-
-def _process_single_download(book_id: str, cancel_flag: Event) -> None:
-    """Process a single download job."""
-    try:
-        book_queue.update_status(book_id, QueueStatus.DOWNLOADING)
-        download_path = _download_book_with_cancellation(book_id, cancel_flag)
-        
-        if cancel_flag.is_set():
-            book_queue.update_status(book_id, QueueStatus.CANCELLED)
-            return
-            
-        if download_path:
-            book_queue.update_download_path(book_id, download_path)
-            new_status = QueueStatus.AVAILABLE
-        else:
-            new_status = QueueStatus.ERROR
-            
-        book_queue.update_status(book_id, new_status)
-        
-        logger.info(
-            f"Book {book_id} download {'successful' if download_path else 'failed'}"
-        )
-        
-    except Exception as e:
-        if not cancel_flag.is_set():
-            logger.error_trace(f"Error in download processing: {e}")
-            book_queue.update_status(book_id, QueueStatus.ERROR)
-        else:
-            logger.info(f"Download cancelled: {book_id}")
-            book_queue.update_status(book_id, QueueStatus.CANCELLED)
-
-def concurrent_download_loop() -> None:
-    """Main download coordinator using ThreadPoolExecutor for concurrent downloads."""
-    logger.info(f"Starting concurrent download loop with {MAX_CONCURRENT_DOWNLOADS} workers")
-    
-    with ThreadPoolExecutor(max_workers=MAX_CONCURRENT_DOWNLOADS, thread_name_prefix="BookDownload") as executor:
-        active_futures: Dict[Future, str] = {}  # Track active download futures
-        
-        while True:
-            # Clean up completed futures
-            completed_futures = [f for f in active_futures if f.done()]
-            for future in completed_futures:
-                book_id = active_futures.pop(future)
-                try:
-                    future.result()  # This will raise any exceptions from the worker
-                except Exception as e:
-                    logger.error_trace(f"Future exception for {book_id}: {e}")
-            
-            # Start new downloads if we have capacity
-            while len(active_futures) < MAX_CONCURRENT_DOWNLOADS:
-                next_download = book_queue.get_next()
-                if not next_download:
-                    break
-                    
-                book_id, cancel_flag = next_download
-                logger.info(f"Starting concurrent download: {book_id}")
-                
-                # Submit download job to thread pool
-                future = executor.submit(_process_single_download, book_id, cancel_flag)
-                active_futures[future] = book_id
-            
-            # Brief sleep to prevent busy waiting
-            time.sleep(MAIN_LOOP_SLEEP_TIME)
-
-# Start concurrent download coordinator
-download_coordinator_thread = threading.Thread(
-    target=concurrent_download_loop,
-    daemon=True,
-    name="DownloadCoordinator"
-)
-download_coordinator_thread.start()
-
-logger.info(f"Download system initialized with {MAX_CONCURRENT_DOWNLOADS} concurrent workers")

book_manager.py

@@ -1,415 +0,0 @@
-"""Book download manager handling search and retrieval operations."""
-
-import time, json, re
-from pathlib import Path
-from urllib.parse import quote
-from typing import List, Optional, Dict, Union, Callable
-from threading import Event
-from bs4 import BeautifulSoup, Tag, NavigableString, ResultSet
-
-import downloader
-from logger import setup_logger
-from config import SUPPORTED_FORMATS, BOOK_LANGUAGE, AA_BASE_URL
-from env import AA_DONATOR_KEY, USE_CF_BYPASS, PRIORITIZE_WELIB, ALLOW_USE_WELIB
-from models import BookInfo, SearchFilters
-logger = setup_logger(__name__)
-
-
-
-def search_books(query: str, filters: SearchFilters) -> List[BookInfo]:
-    """Search for books matching the query.
-
-    Args:
-        query: Search term (ISBN, title, author, etc.)
-
-    Returns:
-        List[BookInfo]: List of matching books
-
-    Raises:
-        Exception: If no books found or parsing fails
-    """
-    query_html = quote(query)
-
-    if filters.isbn:
-        # ISBNs are included in query string
-        isbns = " || ".join(
-            [f"('isbn13:{isbn}' || 'isbn10:{isbn}')" for isbn in filters.isbn]
-        )
-        query_html = quote(f"({isbns}) {query}")
-
-    filters_query = ""
-
-    for value in filters.lang or BOOK_LANGUAGE:
-        if value != "all":
-            filters_query += f"&lang={quote(value)}"
-
-    if filters.sort:
-        filters_query += f"&sort={quote(filters.sort)}"
-
-    if filters.content:
-        for value in filters.content:
-            filters_query += f"&content={quote(value)}"
-
-    # Handle format filter
-    formats_to_use = filters.format if filters.format else SUPPORTED_FORMATS
-
-    index = 1
-    for filter_type, filter_values in vars(filters).items():
-        if filter_type == "author" or filter_type == "title" and filter_values:
-            for value in filter_values:
-                filters_query += (
-                    f"&termtype_{index}={filter_type}&termval_{index}={quote(value)}"
-                )
-                index += 1
-
-    url = (
-        f"{AA_BASE_URL}"
-        f"/search?index=&page=1&display=table"
-        f"&acc=aa_download&acc=external_download"
-        f"&ext={'&ext='.join(formats_to_use)}"
-        f"&q={query_html}"
-        f"{filters_query}"
-    )
-
-    html = downloader.html_get_page(url)
-    if not html:
-        raise Exception("Failed to fetch search results")
-
-    if "No files found." in html:
-        logger.info(f"No books found for query: {query}")
-        raise Exception("No books found. Please try another query.")
-
-    soup = BeautifulSoup(html, "html.parser")
-    tbody: Tag | NavigableString | None = soup.find("table")
-
-    if not tbody:
-        logger.warning(f"No results table found for query: {query}")
-        raise Exception("No books found. Please try another query.")
-
-    books = []
-    if isinstance(tbody, Tag):
-        for line_tr in tbody.find_all("tr"):
-            try:
-                book = _parse_search_result_row(line_tr)
-                if book:
-                    books.append(book)
-            except Exception as e:
-                logger.error_trace(f"Failed to parse search result row: {e}")
-
-    books.sort(
-        key=lambda x: (
-            SUPPORTED_FORMATS.index(x.format)
-            if x.format in SUPPORTED_FORMATS
-            else len(SUPPORTED_FORMATS)
-        )
-    )
-
-    return books
-
-
-def _parse_search_result_row(row: Tag) -> Optional[BookInfo]:
-    """Parse a single search result row into a BookInfo object."""
-    try:
-        cells = row.find_all("td")
-        preview_img = cells[0].find("img")
-        preview = preview_img["src"] if preview_img else None
-
-        return BookInfo(
-            id=row.find_all("a")[0]["href"].split("/")[-1],
-            preview=preview,
-            title=cells[1].find("span").next,
-            author=cells[2].find("span").next,
-            publisher=cells[3].find("span").next,
-            year=cells[4].find("span").next,
-            language=cells[7].find("span").next,
-            format=cells[9].find("span").next.lower(),
-            size=cells[10].find("span").next,
-        )
-    except Exception as e:
-        logger.error_trace(f"Error parsing search result row: {e}")
-        return None
-
-
-def get_book_info(book_id: str) -> BookInfo:
-    """Get detailed information for a specific book.
-
-    Args:
-        book_id: Book identifier (MD5 hash)
-
-    Returns:
-        BookInfo: Detailed book information
-    """
-    url = f"{AA_BASE_URL}/md5/{book_id}"
-    html = downloader.html_get_page(url)
-
-    if not html:
-        raise Exception(f"Failed to fetch book info for ID: {book_id}")
-
-    soup = BeautifulSoup(html, "html.parser")
-
-    return _parse_book_info_page(soup, book_id)
-
-
-def _parse_book_info_page(soup: BeautifulSoup, book_id: str) -> BookInfo:
-    """Parse the book info page HTML into a BookInfo object."""
-    data = soup.select_one("body > main > div:nth-of-type(1)")
-
-    if not data:
-        raise Exception(f"Failed to parse book info for ID: {book_id}")
-
-    preview: str = ""
-
-    node = data.select_one("div:nth-of-type(1) > img")
-    if node:
-        preview_value = node.get("src", "")
-        if isinstance(preview_value, list):
-            preview = preview_value[0]
-        else:
-            preview = preview_value
-
-    data = soup.find_all("div", {"class": "main-inner"})[0].find_next("div")
-    divs = list(data.children)
-
-    every_url = soup.find_all("a")
-    slow_urls_no_waitlist = set()
-    slow_urls_with_waitlist = set()
-    external_urls_libgen = set()
-    external_urls_z_lib = set()
-    external_urls_welib = set()
-
-    for url in every_url:
-        try:
-            if url.text.strip().lower().startswith("slow partner server"):
-                if (
-                    url.next is not None
-                    and url.next.next is not None
-                    and "waitlist" in url.next.next.strip().lower()
-                ):
-                    internal_text = url.next.next.strip().lower()
-                    if "no waitlist" in internal_text:
-                        slow_urls_no_waitlist.add(url["href"])
-                    else:
-                        slow_urls_with_waitlist.add(url["href"])
-            elif (
-                url.next is not None
-                and url.next.next is not None
-                and "click “GET” at the top" in url.next.next.text.strip()
-            ):
-                libgen_url = url["href"]
-                # TODO : Temporary fix ? Maybe get URLs from https://open-slum.org/ ?
-                libgen_url = re.sub(r'libgen\.(lc|is|bz|st)', 'libgen.gl', url["href"])
-
-                external_urls_libgen.add(libgen_url)
-            elif url.text.strip().lower().startswith("z-lib"):
-                if ".onion/" not in url["href"]:
-                    external_urls_z_lib.add(url["href"])
-        except:
-            pass
-
-    external_urls_welib = _get_download_urls_from_welib(book_id) if USE_CF_BYPASS else set()
-
-    urls = []
-    urls += list(external_urls_welib) if PRIORITIZE_WELIB else []
-    urls += list(slow_urls_no_waitlist) if USE_CF_BYPASS else []
-    urls += list(external_urls_libgen)
-    urls += list(external_urls_welib) if not PRIORITIZE_WELIB else []
-    urls += list(slow_urls_with_waitlist)  if USE_CF_BYPASS else []
-    urls += list(external_urls_z_lib)
-
-    for i in range(len(urls)):
-        urls[i] = downloader.get_absolute_url(AA_BASE_URL, urls[i])
-
-    # Remove empty urls
-    urls = [url for url in urls if url != ""]
-
-    # Filter out divs that are not text
-    original_divs = divs
-    divs = [div.text.strip() for div in divs if div.text.strip() != ""]
-
-    separator_index = 6
-    for i, div in enumerate(divs):
-        if "·" in div.strip():
-            separator_index = i
-            break
-            
-    _details = divs[separator_index].lower().split(" · ")
-    format = ""
-    size = ""
-    for f in _details:
-        if format == "" and f.strip().lower() in SUPPORTED_FORMATS:
-            format = f.strip().lower()
-        if size == "" and any(u in f.strip().lower() for u in ["mb", "kb", "gb"]):
-            size = f.strip().lower()
-
-    if format == "" or size == "":
-        for f in _details:
-            if f == "" and not " " in f.strip().lower():
-                format = f.strip().lower()
-            if size == "" and "." in f.strip().lower():
-                size = f.strip().lower()
-
-    
-    book_title = divs[separator_index-3].strip("🔍")
-
-    # Extract basic information
-    book_info = BookInfo(
-        id=book_id,
-        preview=preview,
-        title=book_title,
-        publisher=divs[separator_index-1],
-        author=divs[separator_index-2],
-        format=format,
-        size=size,
-        download_urls=urls,
-    )
-
-    # Extract additional metadata
-    info = _extract_book_metadata(original_divs[-6])
-    book_info.info = info
-
-    # Set language and year from metadata if available
-    if info.get("Language"):
-        book_info.language = info["Language"][0]
-    if info.get("Year"):
-        book_info.year = info["Year"][0]
-
-    return book_info
-
-def _get_download_urls_from_welib(book_id: str) -> set[str]:
-    if ALLOW_USE_WELIB == False:
-        return set()
-    """Get download urls from welib.org."""
-    url = f"https://welib.org/md5/{book_id}"
-    logger.info(f"Getting download urls from welib.org for {book_id}. While this uses the bypasser, it will not start downloading them yet.")
-    html = downloader.html_get_page(url, use_bypasser=True)
-    if not html:
-        return []
-    soup = BeautifulSoup(html, "html.parser")
-    download_links = soup.find_all("a", href=True)
-    download_links = [link["href"] for link in download_links]
-    download_links = [link for link in download_links if "/slow_download/" in link]
-    download_links = [downloader.get_absolute_url(url, link) for link in download_links]
-    return set(download_links)
-
-def _extract_book_metadata(
-    metadata_divs
-) -> Dict[str, List[str]]:
-    """Extract metadata from book info divs."""
-    info: Dict[str, List[str]] = {}
-
-    # Process the first set of metadata
-    sub_datas = metadata_divs.find_all("div")[0]
-    sub_datas = list(sub_datas.children)
-    for sub_data in sub_datas:
-        if sub_data.text.strip() == "":
-            continue
-        sub_data = list(sub_data.children)
-        key = sub_data[0].text.strip()
-        value = sub_data[1].text.strip()
-        if key not in info:
-            info[key] = set()
-        info[key].add(value)
-    
-    # make set into list
-    for key, value in info.items():
-        info[key] = list(value)
-
-    # Filter relevant metadata
-    relevant_prefixes = [
-        "ISBN-",
-        "ALTERNATIVE",
-        "ASIN",
-        "Goodreads",
-        "Language",
-        "Year",
-    ]
-    return {
-        k.strip(): v
-        for k, v in info.items()
-        if any(k.lower().startswith(prefix.lower()) for prefix in relevant_prefixes)
-        and "filename" not in k.lower()
-    }
-
-
-def download_book(book_info: BookInfo, book_path: Path, progress_callback: Optional[Callable[[float], None]] = None, cancel_flag: Optional[Event] = None) -> bool:
-    """Download a book from available sources.
-
-    Args:
-        book_id: Book identifier (MD5 hash)
-        title: Book title for logging
-
-    Returns:
-        Optional[BytesIO]: Book content buffer if successful
-    """
-
-    if len(book_info.download_urls) == 0:
-        book_info = get_book_info(book_info.id)
-    download_links = book_info.download_urls
-
-    # If AA_DONATOR_KEY is set, use the fast download URL. Else try other sources.
-    if AA_DONATOR_KEY != "":
-        download_links.insert(
-            0,
-            f"{AA_BASE_URL}/dyn/api/fast_download.json?md5={book_info.id}&key={AA_DONATOR_KEY}",
-        )
-
-    for link in download_links:
-        try:
-            download_url = _get_download_url(link, book_info.title, cancel_flag)
-            if download_url != "":
-                logger.info(f"Downloading `{book_info.title}` from `{download_url}`")
-
-                data = downloader.download_url(download_url, book_info.size or "", progress_callback, cancel_flag)
-                if not data:
-                    raise Exception("No data received")
-
-                logger.info(f"Download finished. Writing to {book_path}")
-                with open(book_path, "wb") as f:
-                    f.write(data.getbuffer())
-                logger.info(f"Writing `{book_info.title}` successfully")
-                return True
-
-        except Exception as e:
-            logger.error_trace(f"Failed to download from {link}: {e}")
-            continue
-
-    return False
-
-
-def _get_download_url(link: str, title: str, cancel_flag: Optional[Event] = None) -> str:
-    """Extract actual download URL from various source pages."""
-
-    url = ""
-
-    if link.startswith(f"{AA_BASE_URL}/dyn/api/fast_download.json"):
-        page = downloader.html_get_page(link)
-        url = json.loads(page).get("download_url")
-    else:
-        html = downloader.html_get_page(link)
-
-        if html == "":
-            return ""
-
-        soup = BeautifulSoup(html, "html.parser")
-
-        if link.startswith("https://z-lib."):
-            download_link = soup.find_all("a", href=True, class_="addDownloadedBook")
-            if download_link:
-                url = download_link[0]["href"]
-        elif "/slow_download/" in link:
-            download_links = soup.find_all("a", href=True, string="📚 Download now")
-            if not download_links:
-                countdown = soup.find_all("span", class_="js-partner-countdown")
-                if countdown:
-                    sleep_time = int(countdown[0].text)
-                    logger.info(f"Waiting {sleep_time}s for {title}")
-                    if cancel_flag is not None and cancel_flag.wait(timeout=sleep_time):
-                        logger.info(f"Cancelled wait for {title}")
-                        return ""
-                    url = _get_download_url(link, title, cancel_flag)
-            else:
-                url = download_links[0]["href"]
-        else:
-            url = soup.find_all("a", string="GET")[0]["href"]
-
-    return downloader.get_absolute_url(link, url)

cloudflare_bypasser.py

@@ -1,491 +0,0 @@
-import time
-import os
-import socket
-from urllib.parse import urlparse
-import threading
-import env
-from env import LOG_DIR, DEBUG
-import signal
-from datetime import datetime
-import subprocess
-import requests
-from typing import Optional
-
-# --- SeleniumBase Import ---
-from seleniumbase import Driver
-from selenium.webdriver.common.by import By
-from selenium.webdriver.support.ui import WebDriverWait
-from selenium.webdriver.support import expected_conditions as EC
-from selenium.common.exceptions import TimeoutException
-
-import network
-from logger import setup_logger
-from env import MAX_RETRY, DEFAULT_SLEEP
-from config import PROXIES, CUSTOM_DNS, DOH_SERVER, VIRTUAL_SCREEN_SIZE, RECORDING_DIR
-
-logger = setup_logger(__name__)
-network.init()
-
-DRIVER = None
-DISPLAY = {
-    "xvfb": None,
-    "ffmpeg": None,
-}
-LAST_USED = None
-LOCKED = threading.Lock()
-TENTATIVE_CURRENT_URL = None
-
-def _reset_pyautogui_display_state():
-    try:
-        import pyautogui
-        import Xlib.display
-        pyautogui._pyautogui_x11._display = (
-                    Xlib.display.Display(os.environ['DISPLAY'])
-                )
-    except Exception as e:
-        logger.warning(f"Error resetting pyautogui display state: {e}")
-
-def _is_bypassed(sb, escape_emojis : bool = True) -> bool:
-    """Enhanced bypass detection with more comprehensive checks"""
-    try:
-        # Get page information with error handling
-        try:
-            title = sb.get_title().lower()
-        except:
-            title = ""
-            
-        try:
-            body = sb.get_text("body").lower()
-        except:
-            body = ""
-            
-        try:
-            current_url = sb.get_current_url()
-        except:
-            current_url = ""
-        
-        # Check if page is too long, if so we are probably bypassed
-        if len(body.strip()) > 100000:
-            logger.debug(f"Page content too long, we are probably bypassed len: {len(body.strip())}")
-            return True
-        
-        # Detect if there is an emoji in the page, any utf8 emoji, if so we are probably bypassed
-        if escape_emojis:
-            import emoji
-            emoji_list = emoji.emoji_list(body)
-            if len(emoji_list) >= 3:
-                logger.debug(f"Detected emoji in page, we are probably bypassed len: {len(emoji_list)}")
-                return True
-
-        # Enhanced verification texts for newer Cloudflare versions
-        verification_texts = [
-            "just a moment",
-            "verify you are human",
-            "verifying you are human",
-            "cloudflare.com/products/turnstile/?utm_source=turnstile"
-        ]
-        
-        # Check for Cloudflare indicators
-        for text in verification_texts:
-            if text in title or text in body:
-                logger.debug(f"Cloudflare indicator found: '{text}' in page")
-                return False
-        
-        # Additional checks for specific Cloudflare patterns
-        if "cf-" in body or "cloudflare" in current_url.lower():
-            logger.debug("Cloudflare patterns detected in page")
-            return False
-            
-        # Check if we're still on a challenge page (common Cloudflare pattern)
-        if "/cdn-cgi/" in current_url:
-            logger.debug("Still on Cloudflare CDN challenge page")
-            return False
-            
-        # If page is mostly empty, it might still be loading
-        if len(body.strip()) < 50:
-            logger.debug("Page content too short, might still be loading")
-            return False
-            
-        logger.debug(f"Bypass check passed - Title: '{title[:100]}', Body length: {len(body)}")
-        return True
-        
-    except Exception as e:
-        logger.warning(f"Error checking bypass status: {e}")
-        # If we can't check, assume we're not bypassed
-        return False
-
-def _bypass_method_1(sb) -> bool:
-    """Original bypass method using uc_gui_click_captcha"""
-    try:
-        logger.debug("Attempting bypass method 1: uc_gui_click_captcha")
-        sb.uc_gui_click_captcha()
-        time.sleep(3)
-        return _is_bypassed(sb)
-    except Exception as e:
-        logger.debug(f"Method 1 failed on first try: {e}")
-        try:
-            time.sleep(5)
-            sb.wait_for_element_visible('body', timeout=10)
-            sb.uc_gui_click_captcha()
-            time.sleep(3)
-            return _is_bypassed(sb)
-        except Exception as e2:
-            logger.debug(f"Method 1 failed on second try: {e2}")
-            try:
-                time.sleep(DEFAULT_SLEEP)
-                sb.uc_gui_click_captcha()
-                time.sleep(5)
-                return _is_bypassed(sb)
-            except Exception as e3:
-                logger.debug(f"Method 1 completely failed: {e3}")
-                return False
-
-def _bypass_method_2(sb) -> bool:
-    """Alternative bypass method using longer waits and manual interaction"""
-    try:
-        logger.debug("Attempting bypass method 2: wait and reload")
-        # Wait longer for page to load completely
-        time.sleep(10)
-        
-        # Try refreshing the page
-        sb.refresh()
-        time.sleep(8)
-        
-        # Check if bypass worked after refresh
-        if _is_bypassed(sb):
-            return True
-            
-        # Try clicking on the page center (sometimes helps trigger bypass)
-        try:
-            sb.click_if_visible("body", timeout=5)
-            time.sleep(5)
-        except:
-            pass
-            
-        return _is_bypassed(sb)
-    except Exception as e:
-        logger.debug(f"Method 2 failed: {e}")
-        return False
-
-def _bypass_method_3(sb) -> bool:
-    """Third bypass method using user-agent rotation and stealth mode"""
-    try:
-        logger.debug("Attempting bypass method 3: stealth approach")
-        # Wait a random amount to appear more human
-        import random
-        wait_time = random.uniform(8, 15)
-        time.sleep(wait_time)
-        
-        # Try to scroll the page (human-like behavior)
-        try:
-            sb.scroll_to_bottom()
-            time.sleep(2)
-            sb.scroll_to_top()
-            time.sleep(3)
-        except:
-            pass
-            
-        # Check if this helped
-        if _is_bypassed(sb):
-            return True
-            
-        # Try the original captcha click as last resort
-        try:
-            sb.uc_gui_click_captcha()
-            time.sleep(5)
-        except:
-            pass
-            
-        return _is_bypassed(sb)
-    except Exception as e:
-        logger.debug(f"Method 3 failed: {e}")
-        return False
-
-def _bypass(sb, max_retries: int = MAX_RETRY) -> None:
-    """Enhanced bypass function with multiple strategies"""
-    try_count = 0
-    methods = [_bypass_method_1, _bypass_method_2, _bypass_method_3]
-
-    while not _is_bypassed(sb):
-        if try_count >= max_retries:
-            logger.warning("Exceeded maximum retries. Bypass failed.")
-            break
-            
-        method_index = try_count % len(methods)
-        method = methods[method_index]
-        
-        logger.info(f"Bypass attempt {try_count + 1} / {max_retries} using {method.__name__}")
-        
-        try_count += 1
-
-        # Progressive backoff: wait longer between retries
-        wait_time = min(DEFAULT_SLEEP * (try_count - 1), 15)
-        if wait_time > 0:
-            logger.info(f"Waiting {wait_time}s before trying...")
-            time.sleep(wait_time)
-
-        try:
-            if method(sb):
-                logger.info(f"Bypass successful using {method.__name__}")
-                return
-        except Exception as e:
-            logger.warning(f"Exception in {method.__name__}: {e}")
-
-        logger.info(f"Bypass method {method.__name__} failed.")
-
-def _get_chromium_args():
-    
-    arguments = [
-        # Ignore certificate and SSL errors (similar to curl's --insecure)
-        "--ignore-certificate-errors",
-        "--ignore-ssl-errors",
-        "--allow-running-insecure-content",
-        "--ignore-certificate-errors-spki-list",
-        "--ignore-certificate-errors-skip-list"
-    ]
-    
-    # Conditionally add verbose logging arguments
-    if DEBUG:
-        arguments.extend([
-            "--enable-logging", # Enable Chrome browser logging
-            "--v=1",            # Set verbosity level for Chrome logs
-            "--log-file=" + str(LOG_DIR / "chrome_browser.log")
-        ])
-
-    # Add proxy settings if configured
-    if PROXIES:
-        proxy_url = PROXIES.get('https') or PROXIES.get('http')
-        if proxy_url:
-            arguments.append(f'--proxy-server={proxy_url}')
-
-    # --- Add Custom DNS settings ---
-    try:
-        if len(CUSTOM_DNS) > 0:
-            if DOH_SERVER:
-                logger.info(f"Configuring DNS over HTTPS (DoH) with server: {DOH_SERVER}")
-
-                # TODO: This is probably broken and a halucination,
-                # but it should still default to google DOH so its fine...
-                arguments.extend(['--enable-features=DnsOverHttps', '--dns-over-https-mode=secure', f'--dns-over-https-servers="{DOH_SERVER}"'])
-                doh_hostname = urlparse(DOH_SERVER).hostname
-                if doh_hostname:
-                    try:
-                        arguments.append(f'--host-resolver-rules=MAP {doh_hostname} {socket.gethostbyname(doh_hostname)}')
-                    except socket.gaierror:
-                        logger.warning(f"Could not resolve DoH hostname: {doh_hostname}")
-            elif CUSTOM_DNS:
-                arguments.append(f'--dns-server="{",".join(CUSTOM_DNS)}"')
-                arguments.append(f'--disable-features=DnsOverHttps')
-    except Exception as e:
-        logger.error_trace(f"Error configuring DNS settings: {e}")
-    return arguments
-
-CHROMIUM_ARGS = _get_chromium_args()
-
-def _get(url, retry : int = MAX_RETRY):
-    try:
-        logger.info(f"SB_GET: {url}")
-        sb = _get_driver()
-        
-        # Enhanced page loading with better error handling
-        logger.debug("Opening URL with SeleniumBase...")
-        sb.uc_open_with_reconnect(url, DEFAULT_SLEEP)
-        time.sleep(DEFAULT_SLEEP)
-        
-        # Log current page title and URL for debugging
-        try:
-            current_url = sb.get_current_url()
-            current_title = sb.get_title()
-            logger.debug(f"Page loaded - URL: {current_url}, Title: {current_title}")
-        except Exception as debug_e:
-            logger.debug(f"Could not get page info: {debug_e}")
-        
-        # Attempt bypass
-        logger.debug("Starting bypass process...")
-        _bypass(sb)
-        
-        if _is_bypassed(sb):
-            logger.info("Bypass successful.")
-            return sb.page_source
-        else:
-            logger.warning("Bypass completed but page still shows Cloudflare protection")
-            # Log page content for debugging (truncated)
-            try:
-                page_text = sb.get_text("body")[:500] + "..." if len(sb.get_text("body")) > 500 else sb.get_text("body")
-                logger.debug(f"Page content: {page_text}")
-            except:
-                pass
-            
-    except Exception as e:
-        # Enhanced error logging with full stack trace
-        import traceback
-        error_details = f"Exception type: {type(e).__name__}, Message: {str(e)}"
-        stack_trace = traceback.format_exc()
-        
-        if retry == 0:
-            logger.error(f"Failed to initialize browser after all retries: {error_details}")
-            logger.debug(f"Full stack trace: {stack_trace}")
-            _reset_driver()
-            raise e
-        
-        logger.warning(f"Failed to bypass Cloudflare (retry {MAX_RETRY - retry + 1}/{MAX_RETRY}): {error_details}")
-        logger.debug(f"Stack trace: {stack_trace}")
-        
-        # Reset driver on certain errors
-        if "WebDriverException" in str(type(e)) or "SessionNotCreatedException" in str(type(e)):
-            logger.info("Resetting driver due to WebDriver error...")
-            _reset_driver()
-            
-    return _get(url, retry - 1)
-
-def get(url, retry : int = MAX_RETRY):
-    global LOCKED, TENTATIVE_CURRENT_URL, LAST_USED
-    with LOCKED:
-        TENTATIVE_CURRENT_URL = url
-        ret = _get(url, retry)
-        LAST_USED = time.time()
-        return ret
-
-def _init_driver():
-    global DRIVER
-    if DRIVER:
-        _reset_driver()
-    driver = Driver(uc=True, headless=False, size=f"{VIRTUAL_SCREEN_SIZE[0]},{VIRTUAL_SCREEN_SIZE[1]}", chromium_arg=CHROMIUM_ARGS)
-    DRIVER = driver
-    time.sleep(DEFAULT_SLEEP)
-    return driver
-
-def _get_driver():
-    global DRIVER, DISPLAY
-    global LAST_USED
-    logger.info("Getting driver...")
-    LAST_USED = time.time()
-    if env.DOCKERMODE and env.USE_CF_BYPASS and not DISPLAY["xvfb"]:
-        from pyvirtualdisplay import Display
-        display = Display(visible=False, size=VIRTUAL_SCREEN_SIZE)
-        display.start()
-        logger.info("Display started")
-        DISPLAY["xvfb"] = display
-        time.sleep(DEFAULT_SLEEP)
-        _reset_pyautogui_display_state()
-
-        if env.DEBUG:
-            timestamp = datetime.now().strftime("%y%m%d-%H%M%S")
-            output_file = RECORDING_DIR / f"screen_recording_{timestamp}.mp4"
-
-            ffmpeg_cmd = [
-                "ffmpeg",
-                "-y",
-                "-f", "x11grab",
-                "-video_size", f"{VIRTUAL_SCREEN_SIZE[0]}x{VIRTUAL_SCREEN_SIZE[1]}",
-                "-i", f":{display.display}",
-                "-c:v", "libx264",
-                "-preset", "ultrafast",  # or "veryfast" (trade speed for slightly better compression)
-                "-maxrate", "700k",      # Slightly higher bitrate for text clarity
-                "-bufsize", "1400k",    # Buffer size (2x maxrate)
-                "-crf", "36",  # Adjust as needed:  higher = smaller, lower = better quality (23 is visually lossless)
-                "-pix_fmt", "yuv420p",  # Crucial for compatibility with most players
-                "-tune", "animation",   # Optimize encoding for screen content
-                "-x264-params", "bframes=0:deblock=-1,-1", # Optimize for text, disable b-frames and deblocking
-                "-r", "15",         # Reduce frame rate (if content allows)
-                "-an",                # Disable audio recording (if not needed)
-                output_file.as_posix(),
-                "-nostats", "-loglevel", "0"
-            ]
-            logger.info("Starting FFmpeg recording to %s", output_file)
-            logger.debug_trace(f"FFmpeg command: {' '.join(ffmpeg_cmd)}")
-            DISPLAY["ffmpeg"] = subprocess.Popen(ffmpeg_cmd)
-    if not DRIVER:
-        return _init_driver()
-    logger.log_resource_usage()
-    return DRIVER
-
-def _reset_driver():
-    logger.log_resource_usage()
-    logger.info("Resetting driver...")
-    global DRIVER, DISPLAY
-    if DRIVER:
-        try:
-            DRIVER.quit()
-            DRIVER = None
-        except Exception as e:
-            logger.warning(f"Error quitting driver: {e}")
-        time.sleep(0.5)
-    if DISPLAY["xvfb"]:
-        try:
-            DISPLAY["xvfb"].stop()
-            DISPLAY["xvfb"] = None
-        except Exception as e:
-            logger.warning(f"Error stopping display: {e}")
-        time.sleep(0.5)
-    try:
-        os.system("pkill -f Xvfb")
-    except Exception as e:
-        logger.debug(f"Error killing Xvfb: {e}")
-    time.sleep(0.5)
-    if DISPLAY["ffmpeg"]:
-        try:
-            DISPLAY["ffmpeg"].send_signal(signal.SIGINT)
-            DISPLAY["ffmpeg"] = None
-        except Exception as e:
-            logger.debug(f"Error stopping ffmpeg: {e}")
-        time.sleep(0.5)
-    try:
-        os.system("pkill -f ffmpeg")
-    except Exception as e:
-        logger.debug(f"Error killing ffmpeg: {e}")
-    time.sleep(0.5)
-    try:
-        os.system("pkill -f chrom")
-    except Exception as e:
-        logger.debug(f"Error killing chrom: {e}")
-    time.sleep(0.5)
-    logger.info("Driver reset.")
-    logger.log_resource_usage()
-
-def _cleanup_driver():
-    global LOCKED
-    global LAST_USED
-    with LOCKED:
-        if LAST_USED:
-            if time.time() - LAST_USED >= env.BYPASS_RELEASE_INACTIVE_MIN * 60:
-                _reset_driver()
-                LAST_USED = None
-                logger.info("Driver reset due to inactivity.")
-
-def _cleanup_loop():
-    while True:
-        _cleanup_driver()
-        time.sleep(max(env.BYPASS_RELEASE_INACTIVE_MIN / 2, 1))
-
-def _init_cleanup_thread():
-    cleanup_thread = threading.Thread(target=_cleanup_loop)
-    cleanup_thread.daemon = True
-    cleanup_thread.start()
-
-def wait_for_result(func, timeout : int = 10, condition : any = True):
-    start_time = time.time()
-    while time.time() - start_time < timeout:
-        result = func()
-        if condition(result):
-            return result
-        time.sleep(0.5)
-    return None
-_init_cleanup_thread()
-
-
-def get_bypassed_page(url: str) -> Optional[str]:
-    """Fetch HTML content from a URL using the internal Cloudflare Bypasser.
-
-    Args:
-        url: Target URL
-    Returns:
-        str: HTML content if successful, None otherwise
-    """
-
-    response_html = get(url)
-    logger.debug(f"Cloudflare Bypasser response length: {len(response_html)}")
-    if response_html.strip() != "":
-        return response_html
-    else:
-        raise requests.exceptions.RequestException("Failed to bypass Cloudflare")

cloudflare_bypasser_external.py

@@ -1,34 +0,0 @@
-from logger import setup_logger
-from typing import Optional
-import requests
-
-try:
-    from env import EXT_BYPASSER_PATH, EXT_BYPASSER_TIMEOUT, EXT_BYPASSER_URL
-except ImportError:
-    raise RuntimeError("Failed to import environment variables. Are you using an `extbp` image?")
-
-logger = setup_logger(__name__)
-
-
-def get_bypassed_page(url: str) -> Optional[str]:
-    """Fetch HTML content from a URL using an External Cloudflare Resolver.
-
-    Args:
-        url: Target URL
-    Returns:
-        str: HTML content if successful, None otherwise
-    """
-    if not EXT_BYPASSER_URL or not EXT_BYPASSER_PATH:
-        logger.error("Wrong External Bypass configuration. Please check your environment configuration.")
-        return None
-    ext_url = f"{EXT_BYPASSER_URL}{EXT_BYPASSER_PATH}"
-    headers = {"Content-Type": "application/json"}
-    data = {
-        "cmd": "request.get",
-        "url": url,
-        "maxTimeout": EXT_BYPASSER_TIMEOUT
-    }
-    response = requests.post(ext_url, headers=headers, json=data)
-    response.raise_for_status()
-    logger.debug(f"External Bypass response for '{url}': {response.json()['status']} - {response.json()['message']}")
-    return response.json()['solution']['response']

compose/docker-compose.lite.yml

@@ -0,0 +1,16 @@
+services:
+  shelfmark-lite:
+    image: ghcr.io/calibrain/shelfmark-lite:latest
+    container_name: shelfmark-lite
+    environment:
+      # EXT_BYPASSER_URL: http://flaresolverr:8191 #If using Flaresolverr
+      PUID: 1000
+      PGID: 1000
+    ports:
+      - 8084:8084
+    restart: unless-stopped
+    volumes:
+      - /path/to/books:/books # Default destination for book downloads
+      - /path/to/config:/config # App configuration
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

compose/docker-compose.tor.yml

@@ -0,0 +1,20 @@
+# Routes all traffic through Tor - requires root startup
+services:
+  shelfmark-tor:
+    image: ghcr.io/calibrain/shelfmark:latest
+    environment:
+      FLASK_PORT: 8084
+      USING_TOR: true
+      PUID: 1000
+      PGID: 1000
+    cap_add:
+      - NET_ADMIN
+      - NET_RAW
+    ports:
+      - 8084:8084
+    restart: unless-stopped
+    volumes:
+      - /path/to/books:/books # Default destination for book downloads
+      - /path/to/config:/config # App configuration
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

compose/docker-compose.wireguard.yml

@@ -0,0 +1,43 @@
+# Routes all traffic through a WireGuard tunnel - requires root startup.
+#
+# Mount your wg-quick config at /config/wg0.conf (read-only is fine). All
+# non-LAN egress is forced through the tunnel by an iptables kill-switch, so if
+# the tunnel drops, external traffic fails closed. LAN ranges (WebUI + internal
+# download clients like Prowlarr / qBittorrent) stay reachable off-tunnel.
+services:
+  shelfmark-wireguard:
+    image: ghcr.io/calibrain/shelfmark:latest
+    environment:
+      FLASK_PORT: 8084
+      # Quoted so it is passed as the literal string "true": entrypoint.sh compares
+      # $USING_WIREGUARD against "true", and some Compose implementations stringify
+      # a bare YAML boolean as "True", which would silently NOT enable WireGuard.
+      USING_WIREGUARD: "true"
+      # Path to the mounted wg-quick config (default shown).
+      WIREGUARD_CONFIG: /config/wg0.conf
+      # CIDRs kept OFF the tunnel so the WebUI and internal clients stay reachable.
+      LAN_NETWORK: 127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16
+      PUID: 1000
+      PGID: 1000
+    cap_add:
+      - NET_ADMIN
+      - NET_RAW
+    # WireGuard needs the module/kernel routing; NET_ADMIN covers wg-quick.
+    sysctls:
+      - net.ipv4.conf.all.src_valid_mark=1
+      # Disable IPv6 in the container so the kill-switch can guarantee no IPv6
+      # leak path on kernels/containers without a usable ip6tables. wireguard.sh
+      # fails closed if IPv6 is neither kill-switched nor disabled. If your host
+      # DOES have a working ip6tables you may omit these (an ip6tables kill-switch
+      # is installed instead); or set WIREGUARD_ALLOW_IPV6_LEAK=true only if the
+      # container genuinely has no IPv6 connectivity.
+      - net.ipv6.conf.all.disable_ipv6=1
+      - net.ipv6.conf.default.disable_ipv6=1
+    ports:
+      - 8084:8084
+    restart: unless-stopped
+    volumes:
+      - /path/to/books:/books # Default destination for book downloads
+      - /path/to/config:/config # App configuration (put wg0.conf here)
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

compose/docker-compose.yml

@@ -0,0 +1,15 @@
+services:
+  shelfmark:
+    image: ghcr.io/calibrain/shelfmark:latest
+    container_name: shelfmark
+    environment:
+      PUID: 1000
+      PGID: 1000
+    ports:
+      - 8084:8084
+    restart: unless-stopped
+    volumes:
+      - /path/to/books:/books # Default destination for book downloads
+      - /path/to/config:/config # App configuration
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

config.py

@@ -1,101 +0,0 @@
-"""Configuration settings for the book downloader application."""
-
-import os
-from pathlib import Path
-import json
-import env
-from logger import setup_logger
-
-logger = setup_logger(__name__)
-
-for key, value in env.__dict__.items():
-    if not key.startswith('_'):
-        if key == "AA_DONATOR_KEY" and value.strip() != "":
-            value = "REDACTED"
-        logger.info(f"{key}: {value}")
-
-with open("data/book-languages.json") as file:
-    _SUPPORTED_BOOK_LANGUAGE = json.load(file)
-
-# Directory settings
-BASE_DIR = Path(__file__).resolve().parent
-logger.info(f"BASE_DIR: {BASE_DIR}")
-if env.ENABLE_LOGGING:
-    env.LOG_DIR.mkdir(exist_ok=True)
-
-# Create necessary directories
-env.TMP_DIR.mkdir(exist_ok=True)
-env.INGEST_DIR.mkdir(exist_ok=True)
-
-CROSS_FILE_SYSTEM = os.stat(env.TMP_DIR).st_dev != os.stat(env.INGEST_DIR).st_dev
-logger.info(f"STAT TMP_DIR: {os.stat(env.TMP_DIR)}")
-logger.info(f"STAT INGEST_DIR: {os.stat(env.INGEST_DIR)}")
-logger.info(f"CROSS_FILE_SYSTEM: {CROSS_FILE_SYSTEM}")
-
-# Network settings
-_custom_dns = env._CUSTOM_DNS.lower().strip()
-_doh_server = ""
-if _custom_dns == "google":
-    CUSTOM_DNS = ["8.8.8.8", "8.8.4.4", "2001:4860:4860:0000:0000:0000:0000:8888", "2001:4860:4860:0000:0000:0000:0000:8844"]
-    _doh_server = "https://dns.google/dns-query"
-elif _custom_dns == "quad9":
-    CUSTOM_DNS = ["9.9.9.9", "149.112.112.112", "2620:00fe:0000:0000:0000:0000:0000:00fe", "2620:00fe:0000:0000:0000:0000:0000:0009"]
-    _doh_server = "https://dns.quad9.net/dns-query"
-elif _custom_dns == "cloudflare":
-    CUSTOM_DNS = ["1.1.1.1", "1.0.0.1", "2606:4700:4700:0000:0000:0000:0000:1111", "2606:4700:4700:0000:0000:0000:0000:1001"]
-    _doh_server = "https://cloudflare-dns.com/dns-query"
-elif _custom_dns == "opendns":
-    CUSTOM_DNS = ["208.67.222.222", "208.67.220.220", "2620:0119:0035:0000:0000:0000:0000:0035", "2620:0119:0053:0000:0000:0000:0000:0053"]
-    _doh_server = "https://doh.opendns.com/dns-query"
-else:
-    _custom_dns_ip = _custom_dns.split(",")
-    CUSTOM_DNS = [dns.strip() for dns in _custom_dns_ip if dns.replace(":", "").replace(".", "").strip().isdigit()]
-logger.info(f"CUSTOM_DNS: {CUSTOM_DNS}")
-DOH_SERVER = _doh_server
-if env.USE_DOH:
-    DOH_SERVER = _doh_server
-else:
-    DOH_SERVER = ""
-logger.info(f"DOH_SERVER: {DOH_SERVER}")
-
-# Proxy settings
-PROXIES = {}
-if env.HTTP_PROXY:
-    PROXIES["http"] = env.HTTP_PROXY
-if env.HTTPS_PROXY:
-    PROXIES["https"] = env.HTTPS_PROXY
-logger.info(f"PROXIES: {PROXIES}")
-
-# Anna's Archive settings
-AA_BASE_URL = env._AA_BASE_URL
-AA_AVAILABLE_URLS = ["https://annas-archive.org", "https://annas-archive.se", "https://annas-archive.li"]
-AA_AVAILABLE_URLS.extend(env._AA_ADDITIONAL_URLS.split(","))
-AA_AVAILABLE_URLS = [url.strip() for url in AA_AVAILABLE_URLS if url.strip()]
-
-# File format settings
-SUPPORTED_FORMATS = env._SUPPORTED_FORMATS.split(",")
-logger.info(f"SUPPORTED_FORMATS: {SUPPORTED_FORMATS}")
-
-# Complex language processing logic kept in config.py
-BOOK_LANGUAGE = env._BOOK_LANGUAGE.split(',')
-BOOK_LANGUAGE = [l for l in BOOK_LANGUAGE if l in [lang['code'] for lang in _SUPPORTED_BOOK_LANGUAGE]]
-if len(BOOK_LANGUAGE) == 0:
-    BOOK_LANGUAGE = ['en']
-
-# Custom script settings with validation logic
-CUSTOM_SCRIPT = env._CUSTOM_SCRIPT
-if CUSTOM_SCRIPT:
-    if not os.path.exists(CUSTOM_SCRIPT):
-        logger.warn(f"CUSTOM_SCRIPT {CUSTOM_SCRIPT} does not exist")
-        CUSTOM_SCRIPT = ""
-    elif not os.access(CUSTOM_SCRIPT, os.X_OK):
-        logger.warn(f"CUSTOM_SCRIPT {CUSTOM_SCRIPT} is not executable")
-        CUSTOM_SCRIPT = ""
-
-# Debugging settings
-if not env.USING_EXTERNAL_BYPASSER:
-    # Virtual display settings for debugging internal cloudflare bypasser
-    VIRTUAL_SCREEN_SIZE = (1024, 768)
-    RECORDING_DIR = env.LOG_DIR / "recording"
-    if env.DEBUG:
-        RECORDING_DIR.mkdir(parents=True, exist_ok=True)

data/book-languages.json

@@ -1,72 +1,79 @@
 [
-    { "language": "English", "code": "en" },
-    { "language": "Chinese", "code": "zh" },
-    { "language": "Russian", "code": "ru" },
-    { "language": "Spanish", "code": "es" },
-    { "language": "French", "code": "fr" },
-    { "language": "German", "code": "de" },
-    { "language": "Italian", "code": "it" },
-    { "language": "Portuguese", "code": "pt" },
-    { "language": "Polish", "code": "pl" },
-    { "language": "Bulgarian", "code": "bg" },
-    { "language": "Dutch", "code": "nl" },
-    { "language": "Japanese", "code": "ja" },
-    { "language": "Arabic", "code": "ar" },
-    { "language": "Hebrew", "code": "he" },
-    { "language": "Turkish", "code": "tr" },
-    { "language": "Hungarian", "code": "hu" },
-    { "language": "Latin", "code": "la" },
-    { "language": "Czech", "code": "cs" },
-    { "language": "Korean", "code": "ko" },
-    { "language": "Ukrainian", "code": "uk" },
-    { "language": "Indonesian", "code": "id" },
-    { "language": "Romanian", "code": "ro" },
-    { "language": "Swedish", "code": "sv" },
-    { "language": "Greek", "code": "el" },
-    { "language": "Lithuanian", "code": "lt" },
-    { "language": "Bangla", "code": "bn" },
-    { "language": "Traditional Chinese", "code": "zh‑Hant" },
-    { "language": "Afrikaans", "code": "af" },
-    { "language": "Catalan", "code": "ca" },
-    { "language": "Danish", "code": "da" },
-    { "language": "Thai", "code": "th" },
-    { "language": "Hindi", "code": "hi" },
-    { "language": "Irish", "code": "ga" },
-    { "language": "Latvian", "code": "lv" },
+    { "language": "English", "code": "en", "aliases": ["eng"] },
+    { "language": "Chinese", "code": "zh", "aliases": ["chi", "zho"] },
+    { "language": "Russian", "code": "ru", "aliases": ["rus"] },
+    { "language": "Spanish", "code": "es", "aliases": ["spa"] },
+    { "language": "French", "code": "fr", "aliases": ["fra", "fre"] },
+    { "language": "German", "code": "de", "aliases": ["deu", "ger"] },
+    { "language": "Italian", "code": "it", "aliases": ["ita"] },
+    { "language": "Portuguese", "code": "pt", "aliases": ["por"] },
+    { "language": "Polish", "code": "pl", "aliases": ["pol"] },
+    { "language": "Bulgarian", "code": "bg", "aliases": ["bul"] },
+    { "language": "Dutch", "code": "nl", "aliases": ["dut", "nld"] },
+    { "language": "Japanese", "code": "ja", "aliases": ["jap", "jpn"] },
+    { "language": "Arabic", "code": "ar", "aliases": ["ara"] },
+    { "language": "Hebrew", "code": "he", "aliases": ["heb"] },
+    { "language": "Turkish", "code": "tr", "aliases": ["tur"] },
+    { "language": "Hungarian", "code": "hu", "aliases": ["hun"] },
+    { "language": "Latin", "code": "la", "aliases": ["lat"] },
+    { "language": "Czech", "code": "cs", "aliases": ["ces", "cze"] },
+    { "language": "Korean", "code": "ko", "aliases": ["kor"] },
+    { "language": "Ukrainian", "code": "uk", "aliases": ["ukr"] },
+    { "language": "Indonesian", "code": "id", "aliases": ["ind"] },
+    { "language": "Romanian", "code": "ro", "aliases": ["rom", "ron"] },
+    { "language": "Swedish", "code": "sv", "aliases": ["swe"] },
+    { "language": "Greek", "code": "el", "aliases": ["ell", "gre"] },
+    { "language": "Lithuanian", "code": "lt", "aliases": ["lit"] },
+    { "language": "Bangla", "code": "bn", "aliases": ["ben", "bengali"] },
+    { "language": "Traditional Chinese", "code": "zh-Hant", "aliases": ["zh‑Hant"] },
+    { "language": "Afrikaans", "code": "af", "aliases": ["afr"] },
+    { "language": "Catalan", "code": "ca", "aliases": ["cat"] },
+    { "language": "Danish", "code": "da", "aliases": ["dan"] },
+    { "language": "Thai", "code": "th", "aliases": ["tha"] },
+    { "language": "Hindi", "code": "hi", "aliases": ["hin"] },
+    { "language": "Irish", "code": "ga", "aliases": ["gle"] },
+    { "language": "Latvian", "code": "lv", "aliases": ["lav"] },
     { "language": "Tibetan", "code": "bo" },
-    { "language": "Kannada", "code": "kn" },
-    { "language": "Serbian", "code": "sr" },
-    { "language": "Persian", "code": "fa" },
-    { "language": "Croatian", "code": "hr" },
+    { "language": "Kannada", "code": "kn", "aliases": ["kan"] },
+    { "language": "Serbian", "code": "sr", "aliases": ["srp"] },
+    { "language": "Persian", "code": "fa", "aliases": ["farsi", "fas", "per"] },
+    { "language": "Croatian", "code": "hr", "aliases": ["hrv"] },
     { "language": "Slovak", "code": "sk" },
-    { "language": "Javanese", "code": "jv" },
-    { "language": "Vietnamese", "code": "vi" },
-    { "language": "Urdu", "code": "ur" },
-    { "language": "Finnish", "code": "fi" },
-    { "language": "Norwegian", "code": "no" },
+    { "language": "Javanese", "code": "jv", "aliases": ["jav"] },
+    { "language": "Vietnamese", "code": "vi", "aliases": ["vie"] },
+    { "language": "Urdu", "code": "ur", "aliases": ["urd"] },
+    { "language": "Finnish", "code": "fi", "aliases": ["fin"] },
+    { "language": "Norwegian", "code": "no", "aliases": ["nor"] },
     { "language": "Kinyarwanda", "code": "rw" },
-    { "language": "Tamil", "code": "ta" },
+    { "language": "Tamil", "code": "ta", "aliases": ["tam"] },
     { "language": "Belarusian", "code": "be" },
     { "language": "Kazakh", "code": "kk" },
     { "language": "Mongolian", "code": "mn" },
     { "language": "Georgian", "code": "ka" },
-    { "language": "Slovenian", "code": "sl" },
+    { "language": "Slovenian", "code": "sl", "aliases": ["slv"] },
     { "language": "Esperanto", "code": "eo" },
     { "language": "Galician", "code": "gl" },
-    { "language": "Marathi", "code": "mr" },
-    { "language": "Filipino", "code": "fil" },
-    { "language": "Gujarati", "code": "gu" },
-    { "language": "Malayalam", "code": "ml" },
+    { "language": "Marathi", "code": "mr", "aliases": ["mar"] },
+    { "language": "Filipino", "code": "fil", "aliases": ["tagalog", "tgl"] },
+    { "language": "Gujarati", "code": "gu", "aliases": ["guj"] },
+    { "language": "Malayalam", "code": "ml", "aliases": ["mal"] },
     { "language": "Kyrgyz", "code": "ky" },
     { "language": "Azerbaijani", "code": "az" },
     { "language": "Quechua", "code": "qu" },
     { "language": "Swahili", "code": "sw" },
     { "language": "Bashkir", "code": "ba" },
-    { "language": "Punjabi", "code": "pa" },
-    { "language": "Malay", "code": "ms" },
-    { "language": "Telugu", "code": "te" },
+    { "language": "Punjabi", "code": "pa", "aliases": ["pan"] },
+    { "language": "Malay", "code": "ms", "aliases": ["may", "msa"] },
+    { "language": "Telugu", "code": "te", "aliases": ["tel"] },
     { "language": "Albanian", "code": "sq" },
     { "language": "Uyghur", "code": "ug" },
     { "language": "Armenian", "code": "hy" },
-    { "language": "Shan", "code": "shn" }
-]
+    { "language": "Shan", "code": "shn" },
+    { "language": "Bosnian", "code": "bs", "aliases": ["bos"] },
+    { "language": "Burmese", "code": "my", "aliases": ["bur", "mya"] },
+    { "language": "Estonian", "code": "et", "aliases": ["est"] },
+    { "language": "Icelandic", "code": "is", "aliases": ["ice", "isl"] },
+    { "language": "Manx", "code": "gv", "aliases": ["glv"] },
+    { "language": "Scottish Gaelic", "code": "gd", "aliases": ["gla"] },
+    { "language": "Sanskrit", "code": "sa", "aliases": ["san"] }
+]

docker-compose.dev.extbp.yml

@@ -0,0 +1,25 @@
+# Local development - External bypasser variant (lite)
+services:
+  shelfmark-lite-dev:
+    extends:
+      file: ./compose/docker-compose.lite.yml
+      service: shelfmark-lite
+    build:
+      context: .
+      dockerfile: Dockerfile
+      target: shelfmark-lite
+    environment:
+      DEBUG: true
+      EXT_BYPASSER_URL: http://flaresolverr:8191
+      EXT_BYPASSER_PATH: /v1
+      EXT_BYPASSER_TIMEOUT: 60000
+    volumes:
+      - ./.local/config:/config
+      - ./.local/books:/books
+      - ./.local/log:/var/log/shelfmark
+      - ./.local/tmp:/tmp/shelfmark
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads
+
+  flaresolverr:
+    image: ghcr.io/flaresolverr/flaresolverr:latest

docker-compose.dev.tor.yml

@@ -0,0 +1,20 @@
+# Local development - Tor variant
+services:
+  shelfmark-tor-dev:
+    extends:
+      file: ./compose/docker-compose.tor.yml
+      service: shelfmark-tor
+    build:
+      context: .
+      dockerfile: Dockerfile
+      target: shelfmark
+    environment:
+      DEBUG: true
+      USING_TOR: true
+    volumes:
+      - ./.local/config:/config
+      - ./.local/books:/books
+      - ./.local/log:/var/log/shelfmark
+      - ./.local/tmp:/tmp/shelfmark
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

docker-compose.dev.wireguard.yml

@@ -0,0 +1,25 @@
+# Local development - WireGuard variant
+services:
+  shelfmark-wireguard-dev:
+    extends:
+      file: ./compose/docker-compose.wireguard.yml
+      service: shelfmark-wireguard
+    build:
+      context: .
+      dockerfile: Dockerfile
+      target: shelfmark
+    environment:
+      # Quoted so they are passed as the literal string "true" (entrypoint.sh and
+      # the app compare against "true"); a bare YAML boolean can be stringified as
+      # "True" by some Compose variants, silently disabling the feature.
+      DEBUG: "true"
+      USING_WIREGUARD: "true"
+      WIREGUARD_CONFIG: /config/wg0.conf
+    volumes:
+      - ./.local/config:/config
+      - ./.local/books:/books
+      - ./.local/log:/var/log/shelfmark
+      - ./.local/tmp:/tmp/shelfmark
+      # Place your wg-quick config at ./.local/config/wg0.conf
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

docker-compose.dev.yml

@@ -1,17 +1,25 @@
+# Local development - builds from source with debug enabled
 services:
-  calibre-web-automated-book-downloader-dev:
+  shelfmark-dev:
     extends:
-      file: ./docker-compose.yml
-      service: calibre-web-automated-book-downloader
+      file: ./compose/docker-compose.yml
+      service: shelfmark
     build:
       context: .
       dockerfile: Dockerfile
-      target: cwa-bd
+      target: shelfmark
+    cap_add:
+      - SYS_PTRACE
     environment:
       DEBUG: true
-      APP_ENV: dev
-      USE_DOH: true
-      CUSTOM_DNS: cloudflare
+      # HIDE_LOCAL_AUTH: true
+      OIDC_AUTO_REDIRECT: true
     volumes:
-      - /tmp/cwa-book-downloader:/tmp/cwa-book-downloader
-      - /tmp/cwa-book-downloader-log:/var/log/cwa-book-downloader
+      - ./.local/config:/config
+      - ./.local/books:/books
+      - ./.local/log:/var/log/shelfmark
+      - ./.local/tmp:/tmp/shelfmark
+      - ./shelfmark:/app/shelfmark:ro
+      - ./frontend-dist:/app/frontend-dist:ro
+      # Required for torrent / usenet - path must match your download client's volume exactly
+      # - /path/to/downloads:/path/to/downloads

docker-compose.extbp.dev.yml

@@ -1,35 +0,0 @@
-services:
-  calibre-web-automated-book-downloader-extbp-dev:
-    container_name: cwa-bd-extbp-dev
-    extends:
-      file: ./docker-compose.extbp.yml
-      service: calibre-web-automated-book-downloader-extbp
-    build:
-      context: .
-      dockerfile: Dockerfile
-      target: cwa-bd-extbp
-    environment:
-      DEBUG: true
-      APP_ENV: dev
-      USE_DOH: true
-      CUSTOM_DNS: cloudflare
-      USE_CF_BYPASS: true  # Enable Cloudflare bypass (default: true)
-      # External Cloudflare Bypass environment variables
-      EXT_BYPASSER_URL: "http://flaresolverr:8191"  # URL of the external Cloudflare resolver service (used FlareSolverr)
-      EXT_BYPASSER_PATH: "/v1"  # Path for external Cloudflare resolver API (default: /v1)
-      EXT_BYPASSER_TIMEOUT: 60000  # Timeout for external Cloudflare resolver requests (default: 60000)
-    volumes:
-      #- /tmp/cwa-book-downloader:/tmp/cwa-book-downloader
-      #- /tmp/cwa-book-downloader-log:/var/log/cwa-book-downloader
-      - ./deploy/ingest:/cwa-book-ingest
-      - ./deploy/log:/var/log/cwa-book-downloader
-      - ./deploy/tmp:/tmp/cwa-book-downloader
-
-  flaresolverr:  # External Cloudflare resolver service
-    image: ghcr.io/flaresolverr/flaresolverr:v3.3.22
-    container_name: flaresolverr
-    environment:
-      LOG_LEVEL: info
-      LOG_HTML: false
-      CAPTCHA_SOLVER: none
-      TZ: Europe/Rome

docker-compose.extbp.yml

@@ -1,25 +0,0 @@
-services:
-  calibre-web-automated-book-downloader-extbp:
-    image: ghcr.io/calibrain/calibre-web-automated-book-downloader-extbp:latest
-    environment:
-      FLASK_PORT: 8084
-      LOG_LEVEL: info
-      BOOK_LANGUAGE: en
-      USE_BOOK_TITLE: true
-      TZ: America/New_York
-      APP_ENV: prod
-      UID: 1000
-      GID: 100
-      EXT_BYPASSER_URL: http://flaresolverr:8191
-    ports:
-      - 8084:8084
-    restart: unless-stopped
-    volumes:
-      # This is where the books will be downloaded to, usually it would be
-      # the same as whatever you gave in "calibre-web-automated"
-      - /tmp/data/calibre-web/ingest:/cwa-book-ingest
-      # This is the location of CWA's app.db, which contains authentication
-      # details
-      #- /cwa/config/path/app.db:/auth/app.db:ro
-  flaresolverr:
-    image: ghcr.io/flaresolverr/flaresolverr:latest

docker-compose.test-clients.yml

@@ -0,0 +1,200 @@
+# Test stack for download client development
+# Includes shelfmark + all download clients on same network with shared volumes
+#
+# Usage:
+#   docker compose -f docker-compose.test-clients.yml up -d
+#   # Access shelfmark at http://localhost:8084
+#   # Configure clients in Settings > Prowlarr > Download Clients
+#
+# Web UIs:
+#   - shelfmark:    http://localhost:8084
+#   - Prowlarr:     http://localhost:9696 (no auth by default)
+#   - qBittorrent:  http://localhost:8080 (check container logs for temp password)
+#   - Transmission: http://localhost:9091 (admin / admin)
+#   - Deluge:       http://localhost:8112 (password: deluge)
+#   - NZBGet:       http://localhost:6789 (nzbget / tegbzn6789)
+#   - NZBHydra:     http://localhost:5076 (no auth by default)
+#   - SABnzbd:      http://localhost:8085 (complete setup wizard for API key)
+#   - rTorrent:     http://localhost:8000 (admin / admin - if auth enabled)
+#
+
+services:
+  shelfmark:
+    build:
+      context: .
+      dockerfile: Dockerfile
+      target: shelfmark
+    container_name: test-shelfmark
+    cap_add:
+      - SYS_PTRACE
+    environment:
+      TZ: UTC
+      DEBUG: "true"
+      # All client configuration is done via Settings UI
+      # Use Docker service names for URLs:
+      #   - qBittorrent: http://qbittorrent:8080
+      #   - Transmission: http://transmission:9091
+      #   - Deluge Web UI: http://deluge:8112
+      #   - NZBGet: http://nzbget:6789
+      #   - NZBHydra: http://nzbhydra:5076
+      #   - SABnzbd: http://sabnzbd:8080
+      #   - rTorrent: http://rtorrent:80 (XMLRPC via HTTP) or rtorrent (port 5000 for SCGI)
+    ports:
+      - "8084:8084"
+    volumes:
+      # Config and state
+      - ./.local/test-clients/shelfmark/config:/config
+      - ./.local/test-clients/shelfmark/log:/var/log/shelfmark
+      # Book destination directory (where completed books go)
+      - ./.local/test-clients/books:/books
+      # Staging directory
+      - ./.local/test-clients/tmp:/tmp/shelfmark
+      # CRITICAL: Mount client download directories so shelfmark can access completed files
+      - ./.local/test-clients/downloads:/downloads
+      # Mount source code for hot-reload (no rebuild needed for Python changes)
+      - ./shelfmark:/app/shelfmark:ro
+      # Mount tests for running pytest in container
+      - ./tests:/app/tests:ro
+      - ./pyproject.toml:/app/pyproject.toml:ro
+      - ./uv.lock:/app/uv.lock:ro
+      # Mount client configs for integration tests to read credentials
+      - ./.local/test-clients/qbittorrent/config:/qbittorrent-config:ro
+      - ./.local/test-clients/sabnzbd/config:/sabnzbd-config:ro
+    depends_on:
+      - nzbget
+      - nzbhydra
+      - sabnzbd
+      - qbittorrent
+      - transmission
+      - deluge
+      - rtorrent
+    restart: unless-stopped
+
+  prowlarr:
+    image: lscr.io/linuxserver/prowlarr:latest
+    container_name: test-prowlarr
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+    volumes:
+      - ./.local/test-clients/prowlarr/config:/config
+    ports:
+      - "9696:9696"
+    restart: unless-stopped
+
+  nzbget:
+    image: lscr.io/linuxserver/nzbget:latest
+    container_name: test-nzbget
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+    volumes:
+      - ./.local/test-clients/nzbget/config:/config
+      - ./.local/test-clients/downloads:/downloads
+      - ./.local/test-clients/nzbget/custom-cont-init.d:/custom-cont-init.d:ro
+    ports:
+      - "6789:6789"  # Web UI / JSON-RPC
+    restart: unless-stopped
+
+  sabnzbd:
+    image: lscr.io/linuxserver/sabnzbd:latest
+    container_name: test-sabnzbd
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+    volumes:
+      - ./.local/test-clients/sabnzbd/config:/config
+      - ./.local/test-clients/downloads:/downloads
+    ports:
+      - "8085:8080"  # Web UI (external:internal)
+    restart: unless-stopped
+
+  qbittorrent:
+    image: lscr.io/linuxserver/qbittorrent:latest
+    container_name: test-qbittorrent
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+      - WEBUI_PORT=8080
+    volumes:
+      - ./.local/test-clients/qbittorrent/config:/config
+      - ./.local/test-clients/downloads:/downloads
+      - ./.local/test-clients/qbittorrent/custom-cont-init.d:/custom-cont-init.d:ro
+    ports:
+      - "8080:8080"  # Web UI / API
+      - "6882:6881"
+      - "6882:6881/udp"
+    restart: unless-stopped
+
+  transmission:
+    image: lscr.io/linuxserver/transmission:latest
+    container_name: test-transmission
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+      - USER=admin
+      - PASS=admin
+    volumes:
+      - ./.local/test-clients/transmission/config:/config
+      - ./.local/test-clients/downloads:/downloads
+    ports:
+      - "9091:9091"  # Web UI / RPC
+      - "51413:51413"
+      - "51413:51413/udp"
+    restart: unless-stopped
+
+  deluge:
+    image: lscr.io/linuxserver/deluge:latest
+    container_name: test-deluge
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+      - DELUGE_LOGLEVEL=error
+    volumes:
+      - ./.local/test-clients/deluge/config:/config
+      - ./.local/test-clients/downloads:/downloads
+    ports:
+      - "8112:8112"  # Web UI
+      - "58846:58846"  # Daemon RPC
+      - "6881:6881"
+      - "6881:6881/udp"
+    restart: unless-stopped
+
+  rtorrent:
+    image: crazymax/rtorrent-rutorrent:latest # linuxserver has deprecated their rtorrent image
+    container_name: test-rtorrent
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=UTC
+    volumes:
+      - ./.local/test-clients/rtorrent/config:/config
+      - ./.local/test-clients/downloads:/downloads
+    ports:
+      - "8000:8000"  # XMLRPC
+      - "8089:8080"  # ruTorrent Web UI
+      - "9000:9000"  # SCGI port
+      - "50000:50000"  # Incoming connections
+      - "6881:6881/udp"
+    restart: unless-stopped
+
+  nzbhydra:
+    image: lscr.io/linuxserver/nzbhydra2:latest
+    container_name: nzbhydra
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Europe/London
+    volumes:
+      - ./.local/test-clients/nzbhydra/config:/config
+      - ./.local/test-clients/downloads:/downloads
+    ports:
+      - 5076:5076
+    restart: unless-stopped
+

docker-compose.tor.dev.yml

@@ -1,15 +0,0 @@
-services:
-  calibre-web-automated-book-downloader-tor-dev:
-    extends:
-      file: ./docker-compose.tor.yml
-      service: calibre-web-automated-book-downloader-tor
-    build:
-      context: .
-      dockerfile: Dockerfile
-      target: cwa-bd-tor
-    environment:
-      DEBUG: true
-      APP_ENV: dev
-    volumes:
-      - /tmp/cwa-book-downloader:/tmp/cwa-book-downloader
-      - /tmp/cwa-book-downloader-log:/var/log/cwa-book-downloader

docker-compose.tor.yml

@@ -1,21 +0,0 @@
-services:
-  calibre-web-automated-book-downloader-tor:
-    image: ghcr.io/calibrain/calibre-web-automated-book-downloader-tor:latest
-    environment:
-      FLASK_PORT: 8084
-      LOG_LEVEL: info
-      BOOK_LANGUAGE: en
-      USE_BOOK_TITLE: true
-      TZ: America/New_York
-      USING_TOR: true
-      APP_ENV: prod
-    cap_add:
-      - NET_ADMIN
-      - NET_RAW
-    ports:
-      - 8084:8084
-    restart: unless-stopped
-    volumes:
-    # This is where the books will be downloaded to, usually it would be 
-    # the same as whatever you gave in "calibre-web-automated"
-      - /tmp/data/calibre-web/ingest:/cwa-book-ingest

docker-compose.yml

@@ -1,30 +0,0 @@
-services:
-  calibre-web-automated-book-downloader:
-    image: ghcr.io/calibrain/calibre-web-automated-book-downloader:latest
-    # Uncomment to build the image from the Dockerfile for local testing changes.
-    # Remember to comment out the image line above.
-    #build: .
-    container_name: calibre-web-automated-book-downloader
-    environment:
-      FLASK_PORT: 8084
-      LOG_LEVEL: info
-      BOOK_LANGUAGE: en
-      USE_BOOK_TITLE: true
-      TZ: America/New_York
-      APP_ENV: prod
-      UID: 1000
-      GID: 100
-      # CWA_DB_PATH: /auth/app.db  # Comment out to disable authentication
-      # Queue management settings
-      MAX_CONCURRENT_DOWNLOADS: 3
-      DOWNLOAD_PROGRESS_UPDATE_INTERVAL: 5
-    ports:
-      - 8084:8084
-    restart: unless-stopped
-    volumes:
-      # This is where the books will be downloaded to, usually it would be
-      # the same as whatever you gave in "calibre-web-automated"
-      - /tmp/data/calibre-web/ingest:/cwa-book-ingest
-      # This is the location of CWA's app.db, which contains authentication
-      # details. Comment out to disable authentication
-      #- /cwa/config/path/app.db:/auth/app.db:ro

docs/configuration.md

@@ -0,0 +1,135 @@
+# Directory and Volume Setup
+
+This guide explains how to configure directories and Docker volumes for Shelfmark. It focuses on the difference between the destination folder and your download client paths, and how to make those paths line up inside containers.
+
+## Conceptual Overview
+
+```
+DIRECT DOWNLOADS
+
+Shelfmark downloads directly -> destination
+
+TORRENT / USENET
+
+Prowlarr -> Download client saves to <client path>
+         -> Shelfmark reads from <client path>
+         -> Shelfmark processes to destination
+```
+
+Key point: For torrent and usenet downloads, Shelfmark must see the same file path that your download client reports. The container path must match in both containers.
+
+## Direct Download Volume Setup
+
+If you plan to use Direct Download, it does not use an external download client. A simple two-folder setup is enough.
+
+Required volumes:
+
+| Container path | Purpose | Notes |
+| --- | --- | --- |
+| `/config` | Settings, database, cover cache | Configurable via `CONFIG_DIR` |
+| `/books` | Destination folder for completed files | Configurable via `INGEST_DIR` and Settings -> Downloads -> Destination |
+
+Example `docker-compose`:
+
+```yaml
+services:
+  shelfmark:
+    image: ghcr.io/calibrain/shelfmark:latest
+    volumes:
+      - /path/to/config:/config
+      - /path/to/books:/books
+```
+
+Notes:
+- Point `/books` to your library ingest folder (Calibre-Web, Booklore, Audiobookshelf, etc) for automatic import.
+- If you set Books Output Mode to Booklore (API), books are uploaded via API instead of written to `/books`. Audiobooks still use a destination folder.
+- Ensure `PUID`/`PGID` (or legacy `UID`/`GID`) match the owner of the host directories.
+- For non-root mode, start the container as `1000:1000`.
+- On Kubernetes, set `runAsUser: 1000`, `runAsGroup: 1000`, and `runAsNonRoot: true` together.
+- `PUID`/`PGID` keep the default root startup flow.
+- In non-root mode, mounted paths must already be writable by `1000:1000`.
+- `USING_TOR=true` requires root startup.
+
+## Torrent / Usenet Setup
+
+For torrents and usenet, your download client reports a path (for example `/data/torrents/books/MyBook.epub`). Shelfmark must be able to read that exact path inside its own container.
+
+Required volumes:
+
+| Container path | Purpose | Notes |
+| --- | --- | --- |
+| `/config` | Settings, database, cover cache | Configurable via `CONFIG_DIR` |
+| `/books` | Destination folder for processed files | Configurable via `INGEST_DIR` |
+| `<client path>` | Download client path | Must match the download client container path exactly |
+
+Side-by-side example with qBittorrent:
+
+```yaml
+services:
+  shelfmark:
+    volumes:
+      - /path/to/config:/config
+      - /path/to/books:/books
+      - /path/to/downloads:/data/torrents  # Must match client
+
+  qbittorrent:
+    volumes:
+      - /path/to/downloads:/data/torrents  # Same container path
+```
+
+Host paths can be anything. The container path (for example `/data/torrents`) must be identical in both containers.
+
+### Remote Path Mappings
+
+If paths cannot match (different machines or a fixed setup), use Remote Path Mappings.
+
+Where to configure:
+- Settings -> Advanced -> Remote Path Mappings
+
+Example:
+- Client reports `/data/torrents/books/...`
+- Shelfmark can see the same files at `/downloads/books/...`
+- Add a mapping from Remote Path `/data/torrents` to Local Path `/downloads`
+
+If the files are copied or synced into Shelfmark on a delay, increase **Completed Path Wait (seconds)**
+in Settings -> Advanced. The default is 60 seconds; seedbox or remote-sync setups may need a value
+longer than the sync interval.
+
+## File Processing Options
+
+### Transfer Method (Torrent / Usenet Only)
+
+Available methods:
+- Copy (default). Works everywhere.
+- Hardlink. Preserves seeding without duplicating files.
+
+Hardlink requirements and behavior:
+- Source and destination must be on the same filesystem.
+- If hardlinking is enabled but not possible, Shelfmark falls back to copying.
+- Archive extraction is disabled while hardlinking is enabled.
+- Do not use hardlinking if your destination is a library ingest folder.
+
+### File Organization
+
+Shelfmark supports three organization modes for the destination:
+- None. Keep original filenames from the source.
+- Rename Only. Rename files using a template.
+- Rename and Organize. Create folders and rename using templates. Do not use with ingest folders.
+
+Configure templates in Settings -> Downloads. Template syntax details are documented separately.
+
+## Common Mistakes
+
+- "Download failed - file not found": Path mismatch between Shelfmark and the download client. Ensure container paths match or use Remote Path Mappings.
+- "Permission denied": `PUID`/`PGID` do not match the host directories. Ensure Shelfmark can read the client path and write to the destination.
+- "Permission denied" in non-root Docker/Kubernetes mode: ensure the mounted path is writable by UID/GID `1000:1000`, or switch back to root startup with `PUID`/`PGID`.
+- "Hardlinks not working" or "Files being copied instead": Source and destination are on different filesystems. Move the destination or accept copy fallback.
+- "Downloads work but library does not see them": Destination does not point to the library ingest folder. Check Settings -> Downloads -> Destination.
+- CIFS/SMB shares: Use the `nobrl` mount option to avoid database lock errors. Example: `//server/share /mnt/share cifs nobrl,... 0 0`
+
+## Related Documentation
+
+- Environment Variables Reference: `docs/environment-variables.md`
+- Custom Scripts: `docs/custom-scripts.md`
+- Installation: `docs/installation.md`
+- Troubleshooting: `docs/troubleshooting.md`

docs/custom-scripts.md

@@ -0,0 +1,195 @@
+# Custom Scripts
+
+Shelfmark can run an executable you provide after a download task completes successfully. The script runs after the selected output has finished (for example: transfer to the folder destination, or upload to Booklore).
+
+
+## Quick Start (Recommended)
+
+1. Put your script on the machine that runs Shelfmark.
+1. Make it executable.
+1. Set it in Shelfmark (Settings -> Advanced -> Custom Script Path).
+
+Example:
+
+```bash
+chmod +x /path/to/your/scripts/post_process.sh
+```
+
+### Docker Users
+
+If you run Shelfmark in Docker, the script must exist inside the container. The easiest way is to mount a folder of scripts, then point Shelfmark at the container path in the UI.
+
+```yaml
+services:
+  shelfmark:
+    image: ghcr.io/calibrain/shelfmark:latest
+    volumes:
+      - /path/to/your/scripts:/scripts:ro
+```
+
+Then set:
+
+- Settings -> Advanced -> Custom Script Path: `/scripts/post_process.sh`
+
+<details>
+<summary>Docker Compose: Configure Via Environment Variables (Optional)</summary>
+
+```yaml
+services:
+  shelfmark:
+    environment:
+      - CUSTOM_SCRIPT=/scripts/post_process.sh
+      - CUSTOM_SCRIPT_PATH_MODE=absolute
+      - CUSTOM_SCRIPT_JSON_PAYLOAD=true
+```
+
+</details>
+
+## Script Behaviour
+
+When enabled, Shelfmark runs your script once per successful task:
+
+```bash
+<custom_script_path> "<target_path>"
+```
+
+- `$1` is always set to the target path.
+- If **Custom Script JSON Payload** is enabled, Shelfmark writes a JSON document to stdin (UTF-8).
+- If JSON payload is disabled, stdin is empty (EOF).
+- Timeout: 300 seconds (5 minutes)
+- Exit code: `0` = success; anything else = the task is marked as **Error**
+- Concurrency: downloads can run in parallel, so your script may be invoked concurrently for different tasks.
+- Runtime: the script runs inside the Shelfmark container (if you use Docker) under the same user as Shelfmark.
+
+## The Target Path (`$1`)
+
+Shelfmark chooses a "best single path" for the task:
+
+- If the output produced exactly one local file: that file path.
+- If the output produced multiple local files: a directory path (the common parent directory of those files).
+
+What the target path refers to depends on the output mode:
+
+- Folder output (`output.mode=folder`, `phase=post_transfer`): the final imported file or folder inside your destination.
+- Booklore output (`output.mode=booklore`, `phase=post_upload`): the local file or folder that was uploaded (the destination is remote).
+
+By default, `$1` is an absolute path inside the Shelfmark container (or on your host, if you are not using Docker).
+
+## JSON Payload (stdin)
+
+Configure in: Settings -> Advanced -> Custom Script JSON Payload
+
+When enabled, Shelfmark sends a versioned JSON payload to your script via stdin (and still passes `$1`). This is the recommended way to write robust scripts, especially for multi-file imports (audiobooks) and output-specific context (like Booklore).
+
+- The JSON payload always includes absolute paths in `paths.*`, even if you set Custom Script Path Mode to `relative` for `$1`.
+- `output.mode` tells you which output ran.
+- `output.details` is output-specific. For Booklore output, `output.details.booklore` includes connection details such as `base_url`, `library_id`, and `path_id`.
+- `phase` indicates when the script is running. Current values: `post_transfer` (folder output), `post_upload` (Booklore output).
+- `transfer` is only included for outputs that do a local transfer (for example the folder output).
+
+If JSON payload is disabled, stdin is empty (EOF). Don't `cat` stdin unless you've enabled the payload.
+
+Example payload shape:
+
+```json
+{
+  "version": 1,
+  "phase": "post_transfer",
+  "task": {
+    "task_id": "abc123",
+    "source": "direct",
+    "title": "Foundation",
+    "author": "Isaac Asimov"
+  },
+  "output": {
+    "mode": "folder",
+    "organization_mode": "organize"
+  },
+  "paths": {
+    "destination": "/data/library/books",
+    "target": "/data/library/books/Isaac Asimov/Foundation/Foundation.epub",
+    "final_paths": [
+      "/data/library/books/Isaac Asimov/Foundation/Foundation.epub"
+    ]
+  },
+  "transfer": {
+    "op_counts": {"copy": 1, "move": 0, "hardlink": 0},
+    "use_hardlink": false,
+    "is_torrent": false,
+    "preserve_source": false
+  }
+}
+```
+
+Example (bash + python3) (JSON payload must be enabled):
+
+```bash
+payload="$(cat)"
+target="$1"
+PAYLOAD="$payload" TARGET="$target" python3 - <<'PY'
+import json
+import os
+import sys
+
+payload = json.loads(os.environ["PAYLOAD"])
+
+print(f"target={os.environ['TARGET']}", file=sys.stderr)
+print(
+    f"mode={payload['output']['mode']} title={payload['task']['title']}",
+    file=sys.stderr,
+)
+for path in payload["paths"]["final_paths"]:
+    print(path, file=sys.stderr)
+PY
+```
+
+Example (Python) (works whether JSON payload is enabled or not):
+
+```python
+#!/usr/bin/env python3
+import json
+import sys
+
+target = sys.argv[1]
+raw = sys.stdin.read()
+payload = json.loads(raw) if raw.strip() else None
+
+print(f"target={target}", file=sys.stderr)
+if payload:
+    print(f"mode={payload['output']['mode']} phase={payload['phase']}", file=sys.stderr)
+```
+
+<details>
+<summary>Advanced Options</summary>
+
+### Absolute vs Relative Target Paths
+
+Configure in: Settings -> Advanced -> Custom Script Path Mode
+
+This setting controls what gets passed as `$1`:
+
+- `absolute` (default): pass an absolute path.
+- `relative`: pass a path relative to the output's "destination root", and run the script with `$PWD` set to that root.
+
+For folder output, the destination root is your configured destination folder. For Booklore output, it's the local upload folder.
+
+Example (folder destination is `/data/library/books`, and the imported file ended up in `Isaac Asimov/Foundation/Foundation.epub`):
+
+```bash
+# Absolute mode:
+$PWD is unchanged
+$1 = /data/library/books/Isaac Asimov/Foundation/Foundation.epub
+
+# Relative mode:
+$PWD = /data/library/books
+$1 = Isaac Asimov/Foundation/Foundation.epub
+```
+
+Note: if the target is the destination folder itself, `relative` mode may pass `.`.
+
+</details>
+
+## Notes And Caveats
+
+- **Hardlinks and torrents:** if you use hardlinking to keep seeding, avoid scripts that modify file contents, since hardlinked files share data with the seeding copy.
+- **Booklore output mode:** scripts run after upload. `$1` will point at the local uploaded file (or staging folder).

docs/dev/index.md

@@ -0,0 +1,3 @@
+# Developer Documentation
+
+TODO

docs/dev/plugin-settings.md

@@ -0,0 +1,654 @@
+# Plugin Settings Integration Guide
+
+This guide explains how to add configuration settings to plugins (Metadata Providers and Release Sources) so they appear in the Settings UI.
+
+## Overview
+
+The settings system uses a decorator-based registration pattern. Plugins register their settings when their module is imported, and the frontend dynamically renders the appropriate UI based on the schema provided by the backend.
+
+**Key features:**
+- Settings are defined in Python and automatically rendered in the React frontend
+- Values persist across container restarts via JSON config files
+- Changes take effect immediately without restart (unless marked otherwise)
+
+## Quick Start
+
+Add settings to your plugin in 3 steps:
+
+```python
+from shelfmark.core.settings_registry import (
+    register_settings,
+    TextField,
+    PasswordField,
+    ActionButton,
+)
+
+@register_settings(
+    name="my_plugin",           # Unique identifier
+    display_name="My Plugin",   # Shown in sidebar
+    icon="wrench",              # Icon name
+    order=100,                  # Sort order (lower = higher in list)
+    group="metadata_providers"  # Optional: group in sidebar
+)
+def my_plugin_settings():
+    return [
+        PasswordField(
+            key="MY_PLUGIN_API_KEY",
+            label="API Key",
+            description="Your API key from the provider",
+            required=True,
+        ),
+        ActionButton(
+            key="test_connection",
+            label="Test Connection",
+            style="primary",
+            callback=_test_connection,
+        ),
+    ]
+
+def _test_connection():
+    # Perform connection test
+    return {"success": True, "message": "Connected successfully!"}
+```
+
+## Available Field Types
+
+### TextField
+
+Single-line text input for strings.
+
+```python
+TextField(
+    key="MY_SETTING",           # Config key
+    label="Setting Name",       # Display label
+    description="Help text",    # Optional description below field
+    default="",                 # Default value
+    placeholder="Enter value",  # Placeholder text
+    max_length=100,             # Optional max characters
+    required=False,             # Is this field required?
+    requires_restart=False,     # Does changing this need a restart?
+    show_when=None,             # Conditional visibility (see below)
+    disabled_when=None,         # Conditional disable (see below)
+)
+```
+
+### PasswordField
+
+Masked input for sensitive values (API keys, passwords). Values are never echoed back to the frontend.
+
+```python
+PasswordField(
+    key="API_KEY",
+    label="API Key",
+    description="Your secret API key",
+    placeholder="sk-...",
+    required=True,
+)
+```
+
+### NumberField
+
+Numeric input with optional min/max constraints.
+
+```python
+NumberField(
+    key="TIMEOUT",
+    label="Timeout (seconds)",
+    description="Connection timeout in seconds",
+    default=30,
+    min_value=5,
+    max_value=300,
+    step=1,                     # Increment step
+    required=False,
+)
+```
+
+### CheckboxField
+
+Toggle switch for boolean values.
+
+```python
+CheckboxField(
+    key="ENABLE_FEATURE",
+    label="Enable Feature",
+    description="Turn this feature on or off",
+    default=False,
+)
+```
+
+### SelectField
+
+Dropdown for single-choice selection.
+
+```python
+SelectField(
+    key="LOG_LEVEL",
+    label="Log Level",
+    description="Logging verbosity",
+    default="info",
+    options=[
+        {"value": "debug", "label": "Debug"},
+        {"value": "info", "label": "Info"},
+        {"value": "warning", "label": "Warning"},
+        {"value": "error", "label": "Error"},
+    ],
+)
+```
+
+### MultiSelectField
+
+Multi-choice selection from a list of options.
+
+```python
+MultiSelectField(
+    key="SUPPORTED_FORMATS",
+    label="Supported Formats",
+    description="Select which formats to support",
+    default=["epub", "mobi"],
+    options=[
+        {"value": "epub", "label": "EPUB"},
+        {"value": "mobi", "label": "MOBI"},
+        {"value": "pdf", "label": "PDF"},
+        {"value": "azw3", "label": "AZW3"},
+    ],
+)
+```
+
+### ActionButton
+
+Button that executes a callback function. Does not store a value.
+
+```python
+ActionButton(
+    key="test_connection",      # Unique key for the action
+    label="Test Connection",    # Button text
+    description="Test the API connection",
+    style="primary",            # "default", "primary", or "danger"
+    callback=my_callback_fn,    # Function to execute
+)
+
+def my_callback_fn():
+    """Callback must return dict with 'success' and 'message' keys."""
+    try:
+        # Perform action
+        return {"success": True, "message": "Connection successful!"}
+    except Exception as e:
+        return {"success": False, "message": f"Failed: {str(e)}"}
+```
+
+### HeadingField
+
+Display-only section heading with optional link. Does not store a value.
+
+```python
+HeadingField(
+    key="section_heading",      # Unique key
+    title="Configuration",      # Heading text
+    description="Configure the plugin settings below",
+    link_url="https://example.com/docs",  # Optional link
+    link_text="View Documentation",       # Link text
+)
+```
+
+### CustomComponentField
+
+Render a frontend-registered custom settings component while still using the
+decorator-based schema.
+
+```python
+from shelfmark.core.settings_registry import CustomComponentField
+
+CustomComponentField(
+    key="request_policy_editor",
+    component="request_policy_grid",  # frontend registry key
+    label="Request Policy Rules",
+    description="Custom editor for policy defaults and matrix rules.",
+    value_fields=[
+        SelectField(key="REQUEST_POLICY_DEFAULT_EBOOK", label="Default Ebook Mode", default="download"),
+        SelectField(key="REQUEST_POLICY_DEFAULT_AUDIOBOOK", label="Default Audiobook Mode", default="download"),
+        TableField(key="REQUEST_POLICY_RULES", label="Rules", columns=_rule_columns, default=[]),
+    ],
+    wrap_in_field_wrapper=True,  # use standard FieldWrapper label/description layout
+)
+```
+
+When `value_fields` is provided, those backing fields are included in
+serialization/save/validation automatically and are hidden from the default renderer.
+
+## Common Field Properties
+
+All field types support these common properties:
+
+| Property | Type | Default | Description |
+|----------|------|---------|-------------|
+| `key` | `str` | Required | Unique identifier for this setting |
+| `label` | `str` | Required | Display label in the UI |
+| `description` | `str` | `""` | Help text shown below the field |
+| `default` | `Any` | `None` | Default value if not set |
+| `required` | `bool` | `False` | Whether the field must have a value |
+| `disabled` | `bool` | `False` | Disable the field (greyed out) |
+| `disabled_reason` | `str` | `""` | Explanation shown when disabled |
+| `requires_restart` | `bool` | `False` | Whether changes require container restart |
+| `show_when` | `dict` | `None` | Conditional visibility (see below) |
+| `disabled_when` | `dict` | `None` | Conditional disable (see below) |
+| `hidden_in_ui` | `bool` | `False` | Hide from default renderer but keep in schema/save path |
+
+## Conditional Visibility
+
+Fields can be shown/hidden based on other field values using `show_when`:
+
+```python
+# Only show DNS servers field when custom DNS is selected
+TextField(
+    key="CUSTOM_DNS_SERVERS",
+    label="DNS Servers",
+    description="Comma-separated DNS server IPs",
+    show_when={"field": "DNS_PROVIDER", "value": "manual"},
+)
+```
+
+The field will only be visible when the referenced field has the specified value.
+
+## Conditional Disable
+
+Fields can be enabled/disabled based on other field values using `disabled_when`:
+
+```python
+# Disable timeout field when feature is disabled
+NumberField(
+    key="FEATURE_TIMEOUT",
+    label="Timeout (seconds)",
+    description="Request timeout",
+    default=30,
+    disabled_when={
+        "field": "FEATURE_ENABLED",
+        "value": False,
+        "reason": "Enable the feature first"
+    },
+)
+```
+
+The field will be greyed out with the specified reason when the condition is met.
+
+## Settings Groups
+
+Register a group to organize related settings tabs in the sidebar:
+
+```python
+from shelfmark.core.settings_registry import register_group
+
+# Register a group (do this once, usually in a central config file)
+register_group(
+    name="my_group",
+    display_name="My Group",
+    icon="folder",
+    order=50,
+)
+
+# Then register settings to the group
+@register_settings(
+    name="plugin_a",
+    display_name="Plugin A",
+    icon="puzzle",
+    order=51,
+    group="my_group",  # Assigns to the group
+)
+def plugin_a_settings():
+    return [...]
+```
+
+**Existing groups:**
+- `direct_download` (order=20): For download-related settings
+- `metadata_providers` (order=50): For metadata provider plugins
+
+## Value Resolution Priority
+
+Settings values are resolved in this order (highest priority first):
+
+1. **Config File** - Stored in `CONFIG_DIR/plugins/<tab_name>.json`
+2. **Field Default** - Value specified in the field definition
+
+The `general` tab uses `CONFIG_DIR/settings.json` instead of the plugins subdirectory.
+
+## Reading Setting Values
+
+Use the `config` singleton to read setting values in your plugin code:
+
+```python
+from shelfmark.core.config import config
+
+# Get a setting value with default fallback
+api_key = config.get("MY_PLUGIN_API_KEY", "")
+timeout = config.get("MY_PLUGIN_TIMEOUT", 30)
+
+# Or access as attributes (raises AttributeError if not found)
+api_key = config.MY_PLUGIN_API_KEY
+
+# Check all cached settings
+all_settings = config.get_all()
+```
+
+The config singleton:
+- Automatically resolves values from config files with field defaults as fallback
+- Caches values for performance
+- Refreshes automatically when settings are updated via the UI
+
+## Complete Example: Metadata Provider
+
+Here's a complete example for a metadata provider plugin:
+
+```python
+# shelfmark/metadata_providers/my_provider.py
+
+from shelfmark.metadata_providers.base import (
+    MetadataProvider,
+    register_provider,
+)
+from shelfmark.core.settings_registry import (
+    register_settings,
+    HeadingField,
+    TextField,
+    PasswordField,
+    CheckboxField,
+    ActionButton,
+)
+from shelfmark.core.config import config
+
+
+def _test_connection():
+    """Test API connection callback."""
+    api_key = config.get("MY_PROVIDER_API_KEY", "")
+    if not api_key:
+        return {"success": False, "message": "API key not configured"}
+
+    try:
+        # Perform actual connection test
+        # response = requests.get(...)
+        return {"success": True, "message": "Connected to My Provider API"}
+    except Exception as e:
+        return {"success": False, "message": f"Connection failed: {str(e)}"}
+
+
+@register_settings(
+    name="my_provider",
+    display_name="My Provider",
+    icon="book",
+    order=53,
+    group="metadata_providers",
+)
+def my_provider_settings():
+    """Define settings for this metadata provider."""
+    return [
+        HeadingField(
+            key="my_provider_heading",
+            title="My Provider",
+            description="A metadata provider for book information",
+            link_url="https://myprovider.com",
+            link_text="Visit My Provider",
+        ),
+        PasswordField(
+            key="MY_PROVIDER_API_KEY",
+            label="API Key",
+            description="Your My Provider API key",
+            placeholder="Enter your API key",
+            required=True,
+        ),
+        CheckboxField(
+            key="MY_PROVIDER_INCLUDE_COVERS",
+            label="Include Cover Images",
+            description="Fetch cover images when searching",
+            default=True,
+        ),
+        TextField(
+            key="MY_PROVIDER_BASE_URL",
+            label="API Base URL",
+            description="Override the default API endpoint",
+            default="https://api.myprovider.com/v1",
+            required=False,
+        ),
+        ActionButton(
+            key="test_connection",
+            label="Test Connection",
+            description="Verify your API key works",
+            style="primary",
+            callback=_test_connection,
+        ),
+    ]
+
+
+@register_provider("my_provider")
+class MyProvider(MetadataProvider):
+    """My Provider metadata implementation."""
+
+    name = "my_provider"
+    display_name = "My Provider"
+    requires_auth = True
+
+    def __init__(self, api_key: str = None):
+        self.api_key = api_key or config.get("MY_PROVIDER_API_KEY", "")
+        self.base_url = config.get(
+            "MY_PROVIDER_BASE_URL",
+            "https://api.myprovider.com/v1"
+        )
+
+    def is_available(self) -> bool:
+        return bool(self.api_key)
+
+    def search(self, query: str):
+        # Implementation...
+        pass
+
+    def get_book(self, book_id: str):
+        # Implementation...
+        pass
+```
+
+## Complete Example: Release Source
+
+Here's a complete example for a release source plugin:
+
+```python
+# shelfmark/release_sources/my_source.py
+
+from shelfmark.release_sources.base import (
+    ReleaseSource,
+    DownloadHandler,
+    register_source,
+    register_handler,
+)
+from shelfmark.core.settings_registry import (
+    register_settings,
+    HeadingField,
+    TextField,
+    NumberField,
+    CheckboxField,
+    SelectField,
+    ActionButton,
+)
+from shelfmark.core.config import config
+
+
+def _test_source():
+    """Test source availability callback."""
+    base_url = config.get("MY_SOURCE_URL", "https://mysource.com")
+    try:
+        # Test connectivity
+        return {"success": True, "message": f"Source available at {base_url}"}
+    except Exception as e:
+        return {"success": False, "message": f"Source unavailable: {str(e)}"}
+
+
+@register_settings(
+    name="my_source",
+    display_name="My Source",
+    icon="download",
+    order=25,
+    group="direct_download",
+)
+def my_source_settings():
+    """Define settings for this release source."""
+    return [
+        HeadingField(
+            key="my_source_heading",
+            title="My Source Configuration",
+            description="Configure the My Source download provider",
+        ),
+        CheckboxField(
+            key="MY_SOURCE_ENABLED",
+            label="Enable My Source",
+            description="Include My Source in download fallback chain",
+            default=True,
+        ),
+        TextField(
+            key="MY_SOURCE_URL",
+            label="Source URL",
+            description="Base URL for the source",
+            default="https://mysource.com",
+            show_when={"field": "MY_SOURCE_ENABLED", "value": True},
+        ),
+        NumberField(
+            key="MY_SOURCE_TIMEOUT",
+            label="Timeout (seconds)",
+            description="Request timeout",
+            default=30,
+            min_value=10,
+            max_value=120,
+            show_when={"field": "MY_SOURCE_ENABLED", "value": True},
+        ),
+        SelectField(
+            key="MY_SOURCE_PRIORITY",
+            label="Priority",
+            description="Where in the fallback chain to try this source",
+            default="normal",
+            options=[
+                {"value": "high", "label": "High (try first)"},
+                {"value": "normal", "label": "Normal"},
+                {"value": "low", "label": "Low (try last)"},
+            ],
+            show_when={"field": "MY_SOURCE_ENABLED", "value": True},
+        ),
+        ActionButton(
+            key="test_source",
+            label="Test Source",
+            description="Check if the source is accessible",
+            style="primary",
+            callback=_test_source,
+        ),
+    ]
+
+
+@register_source("my_source")
+class MySource(ReleaseSource):
+    """My Source release source implementation."""
+
+    name = "my_source"
+    display_name = "My Source"
+
+    def __init__(self):
+        self.enabled = config.get("MY_SOURCE_ENABLED", True)
+        self.base_url = config.get("MY_SOURCE_URL", "https://mysource.com")
+        self.timeout = config.get("MY_SOURCE_TIMEOUT", 30)
+
+    def is_available(self) -> bool:
+        return self.enabled
+
+    def search(self, book):
+        # Implementation...
+        pass
+
+
+@register_handler("my_source")
+class MySourceHandler(DownloadHandler):
+    """Handler for downloading from My Source."""
+
+    name = "my_source"
+
+    def download(self, release, output_path):
+        # Implementation...
+        pass
+```
+
+## Best Practices
+
+1. **Use descriptive keys**: Keys should be uppercase and prefixed with your plugin name (e.g., `MY_PLUGIN_API_KEY`)
+
+2. **Provide helpful descriptions**: Include enough detail in descriptions to help users understand what each setting does
+
+3. **Set sensible defaults**: Users should be able to get started without configuring everything
+
+4. **Use conditional visibility**: Hide advanced options behind enabling checkboxes to reduce UI clutter
+
+5. **Include a test button**: ActionButtons that test connections help users verify their configuration
+
+6. **Mark restart-required settings**: Use `requires_restart=True` for settings that can't be applied live
+
+7. **Group related settings**: Use HeadingField to visually separate sections, and put plugins in appropriate groups
+
+8. **Handle missing values gracefully**: Always provide fallbacks when reading settings in your code
+
+## API Reference
+
+### Backend Routes
+
+| Method | Endpoint | Description |
+|--------|----------|-------------|
+| GET | `/api/settings` | Get all settings tabs, groups, and values |
+| GET | `/api/settings/<tab_name>` | Get a specific settings tab |
+| PUT | `/api/settings/<tab_name>` | Update settings for a tab |
+| POST | `/api/settings/<tab_name>/action/<action_key>` | Execute an action button callback |
+
+### Response Format
+
+**GET /api/settings**
+```json
+{
+  "groups": [
+    {"name": "direct_download", "displayName": "Direct Download", "icon": "download", "order": 20}
+  ],
+  "tabs": [
+    {
+      "name": "my_plugin",
+      "displayName": "My Plugin",
+      "icon": "book",
+      "order": 53,
+      "group": "metadata_providers",
+      "fields": [
+        {
+          "type": "password",
+          "key": "MY_PLUGIN_API_KEY",
+          "label": "API Key",
+          "description": "Your API key",
+          "hasValue": true,
+          "value": "",
+          "required": true,
+          "disabled": false,
+          "requiresRestart": false
+        }
+      ]
+    }
+  ]
+}
+```
+
+**PUT /api/settings/<tab_name>**
+```json
+// Request
+{"MY_PLUGIN_API_KEY": "new-value", "MY_PLUGIN_TIMEOUT": 60}
+
+// Response
+{
+  "success": true,
+  "message": "Settings updated",
+  "updated": ["MY_PLUGIN_API_KEY", "MY_PLUGIN_TIMEOUT"],
+  "requiresRestart": false
+}
+```
+
+**POST /api/settings/<tab_name>/action/<action_key>**
+```json
+// Response
+{
+  "success": true,
+  "message": "Connection successful!"
+}
+```

docs/index.md

@@ -0,0 +1,23 @@
+# Shelfmark Documentation
+
+Shelfmark is a self-hosted interface for searching, requesting, and delivering books and audiobooks through the sources and services you choose to configure.
+
+Use the guides below to set up the app, connect your library tools, and understand the main configuration areas.
+
+## Getting Started
+
+- [Installation](installation.md)
+- [Directory and Volume Setup](configuration.md)
+- [Environment Variables](environment-variables.md)
+
+## Core Guides
+
+- [Users & Requests](users-and-requests.md)
+- [Reverse Proxy](reverse-proxy.md)
+- [OIDC](oidc.md)
+- [URL Search Parameters](url-search-parameters.md)
+- [Custom Scripts](custom-scripts.md)
+
+## Help
+
+- [Troubleshooting](troubleshooting.md)

docs/installation.md

@@ -0,0 +1,33 @@
+# Installation
+
+Shelfmark is typically deployed with Docker Compose.
+
+## Quick Start
+
+1. Download the compose file from the repository:
+
+```bash
+curl -O https://raw.githubusercontent.com/calibrain/shelfmark/main/compose/docker-compose.yml
+```
+
+2. Start the service:
+
+```bash
+docker compose up -d
+```
+
+3. Open `http://localhost:8084`
+
+4. Configure the sources, metadata providers, and delivery settings you want to use
+
+## Next Steps
+
+- For volume and path setup, see [Directory and Volume Setup](configuration.md)
+- For environment-based setup, see [Environment Variables](environment-variables.md)
+- For authentication and user management, see [Users & Requests](users-and-requests.md) and [OIDC](oidc.md)
+
+## Notes
+
+- Universal search is the default mode for new installs
+- Direct Download is optional and must be enabled and configured before it can be used
+- Torrent and usenet setups require matching download paths between Shelfmark and your download client

docs/oidc.md

@@ -0,0 +1,65 @@
+# OpenID Connect (OIDC) Authentication
+
+## Callback URL
+
+```
+https://<your-shelfmark-domain>/api/auth/oidc/callback
+```
+
+With a subpath (`URL_BASE=/shelfmark/`):
+
+```
+https://<your-shelfmark-domain>/shelfmark/api/auth/oidc/callback
+```
+
+The callback URL is constructed from the incoming request, so your reverse proxy must forward `X-Forwarded-Proto` and `X-Forwarded-Host` correctly, including the external port when it is not the protocol default. PKCE (S256) is used automatically.
+
+## Settings
+
+Configure in **Settings → Security → Authentication Method → OIDC**.
+
+| Setting | Description | Default |
+|---------|-------------|---------|
+| Discovery URL | `/.well-known/openid-configuration` endpoint | — |
+| Client ID | OAuth2 client ID | — |
+| Client Secret | OAuth2 client secret | — |
+| Scopes | Scopes to request. The group claim is added automatically when admin group authorization is enabled | `openid email profile` |
+| Group Claim Name | Claim containing user groups | `groups` |
+| Admin Group Name | Group granted admin access. Leave empty for database-only roles | — |
+| Use Admin Group for Authorization | Toggle group-based admin detection | `true` |
+| Auto-Provision Users | Create accounts on first login | `true` |
+| Login Button Label | Custom text for the sign-in button | — |
+
+Use **Test Connection** to verify discovery, client configuration, and the provider's token signing keys (JWKS) before attempting login.
+
+> **Authentik users:** make sure your provider has a **Signing Key** selected (e.g. the default self-signed certificate). Without one, Authentik serves an empty JWKS document and every login fails with an OIDC callback error, even though the discovery document looks healthy.
+
+## Account Linking
+
+On login, Shelfmark matches the OIDC identity to a user account in this order:
+
+1. **OIDC subject** — a user who has logged in through this provider before.
+2. **Email** — a local account with the same (unique) email address. This only happens when the provider also asserts `email_verified: true` for the address; an unverified email would let anyone claim a local account by registering its address at the IdP.
+3. Otherwise, a new account is created when **Auto-Provision Users** is enabled (username conflicts get a numeric suffix), or the login is rejected with "Account not found" when it is disabled.
+
+If the `email_verified` claim is missing or `false`, email linking is silently skipped — a common surprise when the address was never verified at the identity provider (e.g. Keycloak's **Email verified** toggle on the user, or Authentik accounts created without email verification). Make sure the `email` scope is requested and the address is marked verified in your IdP.
+
+## Environment Variables
+
+These optional environment variables control login page behavior when OIDC is enabled.
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `HIDE_LOCAL_AUTH` | Hide the username/password login option, so only the OIDC button is shown | `false` |
+| `DISABLE_LOCAL_AUTH` | Disable username/password login and remove the local-admin prerequisite for OIDC. Implies `HIDE_LOCAL_AUTH`; with `AUTH_METHOD=builtin`, everyone is locked out until auth env vars are changed. | `false` |
+| `OIDC_AUTO_REDIRECT` | Automatically redirect to the OIDC provider instead of showing the login page | `false` |
+
+If `DISABLE_LOCAL_AUTH` and `OIDC_AUTO_REDIRECT` are both enabled, users are redirected straight to the OIDC provider. On failure they return to the login page with an error message but no password fallback.
+
+## Troubleshooting
+
+- **No token signing keys (empty JWKS)** — The provider's JWKS endpoint returned no keys, so ID tokens can't be verified. In Authentik this happens when the provider has no **Signing Key** selected; pick one (e.g. the default self-signed certificate) and try again.
+- **Issuer validation failed** — The issuer in the token doesn't match the discovery document. Check your provider's external URL / issuer configuration.
+- **Callback URL mismatch** — Reverse proxy isn't forwarding `X-Forwarded-Proto` or `X-Forwarded-Host`, so the constructed callback URL doesn't match what's registered in the provider.
+- **Account not found** — Auto-provision is disabled and the user hasn't been pre-created by an admin. If you pre-created the account with a matching email, see [Account Linking](#account-linking): the provider must send `email_verified: true` for linking to happen.
+- **Login created a duplicate account instead of linking to my local one** — Email linking requires a verified email; see [Account Linking](#account-linking). With `DEBUG=true`, the log notes when linking is skipped because the address isn't verified.

docs/reverse-proxy.md

@@ -0,0 +1,170 @@
+# Reverse Proxy & Subpath Hosting
+
+Shelfmark can run behind a reverse proxy at the root path (recommended) or under a subpath like `/shelfmark`.
+
+## Root path setup (Recommended)
+
+If you can serve Shelfmark at the root path (`https://shelfmark.example.com/`), leave `URL_BASE` empty. This is the simplest option and avoids extra subpath configuration.
+
+Define this once in your Nginx `http` block so websocket upgrades are only sent when the client actually requests them:
+
+```nginx
+map $http_upgrade $connection_upgrade {
+    default upgrade;
+    ''      close;
+}
+```
+
+```nginx
+server {
+    listen 443 ssl;
+    server_name shelfmark.example.com;
+
+    location / {
+        proxy_pass http://shelfmark:8084;
+        proxy_http_version 1.1;
+        proxy_set_header Host $http_host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto $scheme;
+        proxy_set_header X-Forwarded-Host $http_host;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection $connection_upgrade;
+    }
+}
+```
+
+## Subpath setup
+
+Running Shelfmark under a subpath like `/shelfmark` is supported without extra rewrite rules.
+
+### 1. Set the base path in Shelfmark
+
+- **UI**: Settings → Advanced → Base Path → `/shelfmark/`
+- **Environment variable**: `URL_BASE=/shelfmark/`
+
+### 2. Configure your reverse proxy
+
+All Shelfmark paths (UI, API, assets, Socket.IO) are served under the base path. A single location block is enough.
+
+---
+
+### Without Authentication Proxy
+
+**Complete Nginx configuration for subpath deployment:**
+
+```nginx
+location /shelfmark/ {
+    proxy_pass http://shelfmark:8084/shelfmark/;
+    proxy_http_version 1.1;
+    proxy_set_header Host $http_host;
+    proxy_set_header X-Real-IP $remote_addr;
+    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    proxy_set_header X-Forwarded-Proto $scheme;
+    proxy_set_header X-Forwarded-Host $http_host;
+    proxy_set_header Upgrade $http_upgrade;
+    proxy_set_header Connection $connection_upgrade;
+    proxy_read_timeout 86400;
+    proxy_send_timeout 86400;
+    proxy_buffering off;
+}
+```
+
+---
+
+### With Authentication Proxy (Authelia, Authentik, etc.)
+
+Shelfmark supports Proxy Authentication. When enabled, Shelfmark trusts the authenticated user from headers set by your auth proxy.
+
+#### Shelfmark Settings
+
+Configure in Settings → Security:
+
+| Setting | Value |
+|---------|-------|
+| Authentication Method | Proxy Authentication |
+| Proxy Auth User Header | `Remote-User` |
+| Proxy Auth Logout URL | `https://auth.example.com/logout` |
+| Proxy Auth Admin Group Header | `Remote-Groups` |
+| Proxy Auth Admin Group Name | `admins` (or your admin group) |
+
+#### Nginx Configuration with Authelia
+
+This example uses Authelia snippets. Adapt for your auth proxy.
+
+**Authelia auth request snippet** (`/etc/nginx/snippets/authelia-authrequest.conf`):
+
+```nginx
+location /authelia {
+    internal;
+    proxy_pass http://authelia:9091/api/authz/auth-request;
+    proxy_pass_request_body off;
+    proxy_set_header Content-Length "";
+    proxy_set_header Host $host;
+    proxy_set_header X-Original-URL $scheme://$http_host$request_uri;
+    proxy_set_header X-Original-Method $request_method;
+    proxy_set_header X-Real-IP $remote_addr;
+    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    proxy_set_header X-Forwarded-Proto $scheme;
+}
+```
+
+**Authelia location snippet** (`/etc/nginx/snippets/authelia-location.conf`):
+
+```nginx
+auth_request /authelia;
+auth_request_set $target_url $scheme://$http_host$request_uri;
+auth_request_set $user $upstream_http_remote_user;
+auth_request_set $groups $upstream_http_remote_groups;
+auth_request_set $name $upstream_http_remote_name;
+auth_request_set $email $upstream_http_remote_email;
+proxy_set_header Remote-User $user;
+proxy_set_header Remote-Groups $groups;
+proxy_set_header Remote-Name $name;
+proxy_set_header Remote-Email $email;
+error_page 401 =302 https://auth.example.com/?rd=$target_url;
+```
+
+**Complete Nginx configuration with Authelia:**
+
+```nginx
+# Include Authelia auth endpoint in your server block
+include /etc/nginx/snippets/authelia-authrequest.conf;
+
+# Main shelfmark location
+location /shelfmark/ {
+    include /etc/nginx/snippets/authelia-location.conf;
+
+    proxy_pass http://shelfmark:8084/shelfmark/;
+    proxy_http_version 1.1;
+    proxy_set_header Host $http_host;
+    proxy_set_header X-Real-IP $remote_addr;
+    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+    proxy_set_header X-Forwarded-Proto $scheme;
+    proxy_set_header X-Forwarded-Host $http_host;
+    proxy_set_header Upgrade $http_upgrade;
+    proxy_set_header Connection $connection_upgrade;
+    proxy_read_timeout 86400;
+    proxy_send_timeout 86400;
+    proxy_buffering off;
+}
+```
+
+---
+
+## Troubleshooting false network errors
+
+If login, settings saves, or downloads appear to fail in the browser but the action still completes on the server, check your proxy headers first.
+
+- Do not force `Connection: upgrade` on every request. That can break normal `POST` and `PUT` responses while the backend still processes them.
+- If your proxy UI does not support conditional websocket headers, remove the forced websocket headers entirely and let Shelfmark fall back to polling.
+- Keep the standard forwarded headers: `Host`, `X-Forwarded-For`, `X-Forwarded-Proto`, and `X-Forwarded-Host` when using a subpath or OIDC.
+- Preserve the original port in `Host` and `X-Forwarded-Host` by using `$http_host` rather than `$host` when Shelfmark is exposed on a custom port.
+
+This is especially relevant for Nginx Proxy Manager or custom advanced config snippets that add websocket headers globally.
+
+---
+
+## Health checks
+
+Health checks work at `/shelfmark/api/health` when using a subpath configuration.

docs/troubleshooting.md

@@ -0,0 +1,3 @@
+# Troubleshooting
+
+TODO

docs/url-search-parameters.md

@@ -0,0 +1,89 @@
+# URL Search Parameters
+
+You can trigger searches directly via URL by adding query parameters. This enables bookmarking searches and sharing links.
+
+## Basic Usage
+
+```
+http://your-server:8084/?q=harry+potter
+```
+
+## Supported Parameters
+
+| Parameter | Description | Example |
+|-----------|-------------|---------|
+| `q` or `query` | Main search query | `/?q=dune` |
+| `author` | Filter by author name | `/?author=frank+herbert` |
+| `title` | Filter by book title | `/?title=foundation` |
+| `isbn` | Filter by ISBN | `/?isbn=978-0747532699` |
+| `lang` | Filter by language (ISO 639-1 code) | `/?lang=en` |
+| `format` | Filter by file format | `/?format=epub` |
+| `content` | Filter by content type | `/?content=fiction` |
+| `content_type` | Select media type (`ebook`, `audiobook`, or `combined`) in Universal mode only | `/?q=dune&content_type=audiobook` |
+| `sort` | Sort order for results | `/?sort=newest` |
+
+## Multiple Values
+
+Some parameters support multiple values by repeating the parameter:
+
+```
+/?lang=en&lang=de&lang=fr
+/?format=epub&format=mobi&format=azw3
+```
+
+## Examples
+
+**Simple search:**
+```
+/?q=lord+of+the+rings
+```
+
+**Search with author filter:**
+```
+/?q=dune&author=frank+herbert
+```
+
+**Search with format and language:**
+```
+/?q=harry+potter&format=epub&lang=en
+```
+
+**Author search with multiple formats:**
+```
+/?author=stephen+king&format=epub&format=mobi
+```
+
+**Search with sort order:**
+```
+/?q=science+fiction&sort=newest
+```
+
+**Universal search as audiobook:**
+```
+/?q=dune&content_type=audiobook
+```
+
+**Universal search forcing combined (ebook + audiobook):**
+```
+/?q=dune&content_type=combined
+```
+
+## Search Mode Behavior
+
+### Direct Mode
+
+When Search Mode is set to Direct, all parameters are used to filter results from the configured direct source.
+`content_type` is ignored in Direct mode.
+
+### Universal Mode
+
+`q`, `sort`, and `content_type` are used. Other parameters (author, title, format, etc.) are silently ignored since metadata providers have their own search capabilities.
+
+`content_type=combined` forces combined mode (search ebook and audiobook providers together), overriding the last-used preference. It is silently ignored if combined mode is unavailable (e.g. the combined selector is disabled in settings, or either content type is blocked by request policy).
+
+## Notes
+
+- URL parameters are read once on page load
+- The URL is not updated when you perform searches manually
+- Spaces should be encoded as `+` or `%20`
+- Invalid or unknown parameters are silently ignored

docs/users-and-requests.md

@@ -0,0 +1,98 @@
+# Users & Requests
+
+Configure in **Settings → Users & Requests**.
+
+## Authentication Methods
+
+Shelfmark supports four authentication methods, configured in **Settings → Security**.
+
+### Local
+
+You create user accounts directly in Shelfmark with a username and password. At least one local admin account must exist before this mode can be enabled.
+
+### Proxy Authentication
+
+Your reverse proxy handles authentication and passes the username to Shelfmark via a header (e.g. `Remote-User`). Accounts are created automatically on first sign-in. If a local user with the same username already exists, the proxy identity will be linked to that account rather than creating a duplicate. Admin status can optionally be derived from a groups header.
+
+### OIDC (OpenID Connect)
+
+Users sign in through your identity provider. Accounts are created automatically on first login (unless auto-provisioning is disabled, in which case you need to pre-create them). If a local user with a matching verified email already exists, the OIDC identity will be linked to that account on first sign-in. Admin status can optionally be derived from a group claim.
+
+A local admin account is required as a fallback. See [OIDC](oidc.md) for provider setup.
+
+### Calibre-Web Database
+
+User accounts are synced from your Calibre-Web `app.db`. If a local user with a matching email already exists, the CWA identity will be linked to that account. Roles are kept in sync with CWA. Users removed from CWA are cleaned up on the next sync.
+
+Requires mounting your Calibre-Web `app.db` to `/auth/app.db`.
+
+## Per-User Settings
+
+Admins can configure per-user settings by editing a user in the user management panel. Non-admin users can also edit their own settings through **My Account** (accessible from the user menu). Admins control which sections are visible in My Account via the **Visible Self-Settings Sections** option.
+
+There are three categories of per-user settings:
+
+### Delivery Preferences
+
+Override where a user's downloads are sent. Options depend on the global output mode configuration:
+
+- **Output mode** — Folder, Email (SMTP), or BookLore (API)
+- **Destination** — A custom folder path for this user's ebook downloads
+- **Audiobook destination** — A custom folder path for audiobook downloads
+- **BookLore library/path** — Per-user BookLore target (when using BookLore output mode)
+- **Email recipient** — Per-user email address (when using Email output mode)
+
+### Notifications
+
+Users can configure personal notification routes, separate from the global notification settings. Each route targets a URL (e.g. an Apprise-compatible endpoint) and can be scoped to specific event types or all events.
+
+### Request Policy (admin-only)
+
+Admins can override the default ebook/audiobook modes and request rules for individual users. See [Per-User Overrides](#per-user-overrides) below.
+
+---
+
+## Requests
+
+The request system controls whether users can download directly or need admin approval first.
+
+### Policy Modes
+
+Each content type (ebook, audiobook) has a default mode that sets the baseline:
+
+| Mode | Behaviour |
+|------|-----------|
+| **Download** | Users download directly, no approval needed |
+| **Request Release** | Users pick a specific release, then submit it for admin approval |
+| **Request Book** | Users request the book itself — an admin picks the release and fulfils it |
+| **Blocked** | No downloads or requests allowed |
+
+### Settings
+
+| Setting | Description | Default |
+|---------|-------------|---------|
+| Enable Requests | Master toggle. When off, everyone downloads directly | Off |
+| Default Ebook Mode | Baseline mode for all ebook sources | Download |
+| Default Audiobook Mode | Baseline mode for all audiobook sources | Download |
+| Request Rules | Per-source overrides (see below) | None |
+| Max Pending Requests Per User | Open request limit per user | 20 |
+| Allow Notes on Requests | Let users attach a note when submitting | On |
+
+### Request Rules
+
+The rules matrix lets you override the mode for specific source + content type combinations. Rules can only be **equal to or more restrictive** than the content-type default — they cannot grant more access than the baseline.
+
+For example, if the default ebook mode is "Download", a rule can restrict a specific source to "Request Release" or "Blocked", but not the other way around. If no rule matches, the content-type default applies.
+
+### Per-User Overrides
+
+Admins can override the default ebook/audiobook modes and request rules for individual users. Per-user rules are overlaid on the global rules, not replacing them.
+
+### Request Lifecycle
+
+1. User submits a request (book or release level, depending on the resolved policy mode)
+2. Request appears in the admin request queue as **pending**
+3. Admin either **fulfils** (queues a download) or **rejects** the request
+4. For fulfilled requests, delivery state is tracked through the download pipeline
+5. If delivery fails, an admin can reopen the request to try a different release
+6. Users can cancel their own pending requests

downloader.py

@@ -1,135 +0,0 @@
-"""Network operations manager for the book downloader application."""
-
-import network
-network.init()
-import requests
-import time
-from io import BytesIO
-from typing import Optional
-from urllib.parse import urlparse
-from tqdm import tqdm
-from typing import Callable
-from threading import Event
-from logger import setup_logger
-from config import PROXIES
-from env import MAX_RETRY, DEFAULT_SLEEP, USE_CF_BYPASS, USING_EXTERNAL_BYPASSER
-if USE_CF_BYPASS:
-    if USING_EXTERNAL_BYPASSER:
-        from cloudflare_bypasser_external import get_bypassed_page
-    else:
-        from cloudflare_bypasser import get_bypassed_page
-
-logger = setup_logger(__name__)
-
-
-def html_get_page(url: str, retry: int = MAX_RETRY, use_bypasser: bool = False) -> str:
-    """Fetch HTML content from a URL with retry mechanism.
-    
-    Args:
-        url: Target URL
-        retry: Number of retry attempts
-        skip_404: Whether to skip 404 errors
-        
-    Returns:
-        str: HTML content if successful, None otherwise
-    """
-    response = None
-    try:
-        logger.debug(f"html_get_page: {url}, retry: {retry}, use_bypasser: {use_bypasser}")
-        if use_bypasser and USE_CF_BYPASS:
-            logger.info(f"GET Using Cloudflare Bypasser for: {url}")
-            return get_bypassed_page(url)
-        else:
-            logger.info(f"GET: {url}")
-            response = requests.get(url, proxies=PROXIES)
-            response.raise_for_status()
-            logger.debug(f"Success getting: {url}")
-            time.sleep(1)
-        return str(response.text)
-        
-    except Exception as e:
-        if retry == 0:
-            logger.error_trace(f"Failed to fetch page: {url}, error: {e}")
-            return ""
-        
-        if use_bypasser and USE_CF_BYPASS:
-            logger.warning(f"Exception while using cloudflare bypass for URL: {url}")
-            logger.warning(f"Exception: {e}")
-            logger.warning(f"Response: {response}")
-        elif response is not None and response.status_code == 404:
-            logger.warning(f"404 error for URL: {url}")
-            return ""
-        elif response is not None and response.status_code == 403:
-            logger.warning(f"403 detected for URL: {url}. Should retry using cloudflare bypass.")
-            return html_get_page(url, retry - 1, True)
-            
-        sleep_time = DEFAULT_SLEEP * (MAX_RETRY - retry + 1)
-        logger.warning(
-            f"Retrying GET {url} in {sleep_time} seconds due to error: {e}"
-        )
-        time.sleep(sleep_time)
-        return html_get_page(url, retry - 1, use_bypasser)
-
-def download_url(link: str, size: str = "", progress_callback: Optional[Callable[[float], None]] = None, cancel_flag: Optional[Event] = None) -> Optional[BytesIO]:
-    """Download content from URL into a BytesIO buffer.
-    
-    Args:
-        link: URL to download from
-        
-    Returns:
-        BytesIO: Buffer containing downloaded content if successful
-    """
-    try:
-        logger.info(f"Downloading from: {link}")
-        response = requests.get(link, stream=True, proxies=PROXIES)
-        response.raise_for_status()
-
-        total_size : float = 0.0
-        try:
-            # we assume size is in MB
-            total_size = float(size.strip().replace(" ", "").replace(",", ".").upper()[:-2].strip()) * 1024 * 1024
-        except:
-            total_size = float(response.headers.get('content-length', 0))
-        
-        buffer = BytesIO()
-
-        # Initialize the progress bar with your guess
-        pbar = tqdm(total=total_size, unit='B', unit_scale=True, desc='Downloading')
-        for chunk in response.iter_content(chunk_size=1000):
-            buffer.write(chunk)
-            pbar.update(len(chunk))
-            if progress_callback is not None:
-                progress_callback(pbar.n * 100.0 / total_size)
-            if cancel_flag is not None and cancel_flag.is_set():
-                logger.info(f"Download cancelled: {link}")
-                return None
-            
-        pbar.close()
-        if buffer.tell() * 0.1 < total_size * 0.9:
-            # Check the content of the buffer if its HTML or binary
-            if response.headers.get('content-type', '').startswith('text/html'):
-                logger.warn(f"Failed to download content for {link}. Found HTML content instead.")
-                return None
-        return buffer
-    except requests.exceptions.RequestException as e:
-        logger.error_trace(f"Failed to download from {link}: {e}")
-        return None
-
-def get_absolute_url(base_url: str, url: str) -> str:
-    """Get absolute URL from relative URL and base URL.
-    
-    Args:
-        base_url: Base URL
-        url: Relative URL
-    """
-    if url.strip() == "":
-        return ""
-    if url.strip("#") == "":
-        return ""
-    if url.startswith("http"):
-        return url
-    parsed_url = urlparse(url)
-    parsed_base = urlparse(base_url)
-    if parsed_url.netloc == "" or parsed_url.scheme == "":
-        parsed_url = parsed_url._replace(netloc=parsed_base.netloc, scheme=parsed_base.scheme)
-    return parsed_url.geturl()

entrypoint.sh

@@ -1,67 +1,272 @@
 #!/bin/bash
-LOG_DIR=${LOG_ROOT:-/var/log/}/cwa-book-downloader
-mkdir -p $LOG_DIR
-LOG_FILE=${LOG_DIR}/cwa-bd_entrypoint.log
 
-# Cleanup any existing files or folders in the log directory
-rm -rf $LOG_DIR/*
-
-(
-    if [ "$USING_TOR" = "true" ]; then
-        ./tor.sh
-    fi
-)
-
-exec 3>&1 4>&2
-exec > >(tee -a $LOG_FILE) 2>&1
-echo "Starting entrypoint script"
-echo "Log file: $LOG_FILE"
 set -e
 
+is_truthy() {
+    case "${1,,}" in
+        true|yes|1|y) return 0 ;;
+        *) return 1 ;;
+    esac
+}
+
+ENABLE_LOGGING_VALUE="${ENABLE_LOGGING:-true}"
+LOG_PIPE_DIR=""
+LOG_PIPE=""
+TEE_PID=""
+FILE_LOGGING_ENABLED="false"
+CURRENT_UID=$(id -u)
+CURRENT_GID=$(id -g)
+RUN_AS_NON_ROOT="false"
+RUNTIME_TMP_DIR="${TMP_DIR:-/tmp/shelfmark}"
+DEFAULT_RUNTIME_HOME="${RUNTIME_TMP_DIR}/home"
+
+if [ "$CURRENT_UID" != "0" ]; then
+    RUN_AS_NON_ROOT="true"
+fi
+
+start_file_logging() {
+    local logfile="$1"
+
+    LOG_PIPE_DIR="$(mktemp -d)"
+    LOG_PIPE="${LOG_PIPE_DIR}/shelfmark-log.pipe"
+    mkfifo "$LOG_PIPE"
+
+    tee -a "$logfile" < "$LOG_PIPE" &
+    TEE_PID=$!
+
+    exec 3>&1 4>&2
+    exec > "$LOG_PIPE" 2>&1
+}
+
+stop_file_logging() {
+    if [ -z "${TEE_PID:-}" ]; then
+        return 0
+    fi
+
+    exec 1>&3 2>&4
+    exec 3>&- 4>&-
+
+    rm -f "$LOG_PIPE"
+    rmdir "$LOG_PIPE_DIR" 2>/dev/null || true
+
+    wait "$TEE_PID" 2>/dev/null || true
+    TEE_PID=""
+}
+
+if is_truthy "$ENABLE_LOGGING_VALUE"; then
+    LOG_DIR=${LOG_ROOT:-/var/log/}/shelfmark
+    if mkdir -p "$LOG_DIR" 2>/dev/null; then
+        LOG_FILE="${LOG_DIR}/shelfmark_entrypoint.log"
+        # Keep the previous entrypoint log instead of deleting all history on boot.
+        rotation_ok="true"
+        if [ -f "${LOG_FILE}.prev" ] && ! rm -f "${LOG_FILE}.prev"; then
+            echo "Warning: could not remove previous entrypoint log ${LOG_FILE}.prev, continuing without file logging" >&2
+            rotation_ok="false"
+        fi
+        if [ "$rotation_ok" = "true" ] && [ -f "$LOG_FILE" ] && ! mv "$LOG_FILE" "${LOG_FILE}.prev"; then
+            echo "Warning: could not rotate entrypoint log $LOG_FILE, continuing without file logging" >&2
+            rotation_ok="false"
+        fi
+
+        if [ "$rotation_ok" = "true" ]; then
+            FILE_LOGGING_ENABLED="true"
+        else
+            ENABLE_LOGGING_VALUE="false"
+            export ENABLE_LOGGING="false"
+        fi
+    else
+        echo "Warning: could not create log directory $LOG_DIR, continuing without file logging" >&2
+        ENABLE_LOGGING_VALUE="false"
+        export ENABLE_LOGGING="false"
+    fi
+fi
+
+# Egress modes are mutually exclusive. Check this BEFORE starting either one so
+# we never run tor.sh and then abort, leaving a half-configured network stack.
+if [ "$USING_TOR" = "true" ] && [ "$USING_WIREGUARD" = "true" ]; then
+    echo "USING_TOR and USING_WIREGUARD are mutually exclusive; enable only one egress mode." >&2
+    exit 1
+fi
+
+if [ "$USING_TOR" = "true" ]; then
+    if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+        echo "USING_TOR=true requires the container to start as root." >&2
+        echo "Non-root mode skips the privileged filesystem and network setup Tor depends on." >&2
+        exit 1
+    fi
+    ./tor.sh
+fi
+
+if [ "$USING_WIREGUARD" = "true" ]; then
+    if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+        echo "USING_WIREGUARD=true requires the container to start as root." >&2
+        echo "Non-root mode skips the privileged network setup WireGuard depends on." >&2
+        exit 1
+    fi
+    ./wireguard.sh
+fi
+
+if [ "$FILE_LOGGING_ENABLED" = "true" ]; then
+    start_file_logging "$LOG_FILE"
+fi
+
+echo "Starting entrypoint script"
+if [ "$FILE_LOGGING_ENABLED" = "true" ]; then
+    echo "Log file: $LOG_FILE"
+else
+    echo "File logging disabled (ENABLE_LOGGING=$ENABLE_LOGGING_VALUE)"
+fi
+
+PYTHON_BIN="/app/.venv/bin/python"
+if [ ! -x "$PYTHON_BIN" ]; then
+    PYTHON_BIN="python3"
+fi
+
+# Defensive: some orchestrators (e.g. Unraid Dockhand templates) inject a default
+# PATH that drops the venv bin directory baked in by the Dockerfile. Prepend it
+# so subprocesses launched without an absolute path still resolve correctly.
+case ":${PATH}:" in
+    *":/app/.venv/bin:"*) ;;
+    *) export PATH="/app/.venv/bin:${PATH}" ;;
+esac
+GUNICORN_BIN="/app/.venv/bin/gunicorn"
+if [ ! -x "$GUNICORN_BIN" ]; then
+    GUNICORN_BIN="gunicorn"
+fi
+
 # Print build version
 echo "Build version: $BUILD_VERSION"
 echo "Release version: $RELEASE_VERSION"
 
 # Configure timezone
 if [ "$TZ" ]; then
-    echo "Setting timezone to $TZ"
-    ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
+    if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+        echo "TZ is set to $TZ (non-root mode leaves /etc/localtime unchanged)"
+    else
+        echo "Setting timezone to $TZ"
+        ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
+    fi
 fi
 
-# Set UID if not set
-if [ -z "$UID" ]; then
-    UID=1000
+if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+    RUN_UID="$CURRENT_UID"
+    RUN_GID="$CURRENT_GID"
+    USERNAME=$(getent passwd "$RUN_UID" 2>/dev/null | cut -d: -f1 || true)
+    if [ -z "$USERNAME" ]; then
+        USERNAME="$RUN_UID"
+        echo "No passwd entry found for UID $RUN_UID; using numeric identity"
+    fi
+    TARGET_USER_SPEC="${RUN_UID}:${RUN_GID}"
+else
+    # Determine user ID with proper precedence:
+    # 1. PUID (LinuxServer.io standard - recommended)
+    # 2. UID (legacy, for backward compatibility with existing installs)
+    # 3. Default to 1000
+    #
+    # Note: $UID is a bash builtin that's always set. We use `printenv` to detect
+    # if UID was explicitly set as an environment variable (e.g., via docker-compose).
+    if [ -n "$PUID" ]; then
+        RUN_UID="$PUID"
+        echo "Using PUID=$RUN_UID"
+    elif printenv UID >/dev/null 2>&1; then
+        RUN_UID="$(printenv UID)"
+        echo "Using UID=$RUN_UID (legacy - consider migrating to PUID)"
+    else
+        RUN_UID=1000
+        echo "Using default UID=$RUN_UID"
+    fi
+
+    # Determine group ID with proper precedence:
+    # 1. PGID (LinuxServer.io standard - recommended)
+    # 2. GID (legacy, for backward compatibility with existing installs)
+    # 3. Default to 1000
+    if [ -n "$PGID" ]; then
+        RUN_GID="$PGID"
+        echo "Using PGID=$RUN_GID"
+    elif [ -n "$GID" ]; then
+        RUN_GID="$GID"
+        echo "Using GID=$RUN_GID (legacy - consider migrating to PGID)"
+    else
+        RUN_GID=1000
+        echo "Using default GID=$RUN_GID"
+    fi
+
+    if ! getent group "$RUN_GID" >/dev/null; then
+        echo "Adding group $RUN_GID with name appuser"
+        groupadd -g "$RUN_GID" appuser
+    fi
+
+    # Create user if it doesn't exist for this UID yet.
+    if ! getent passwd "$RUN_UID" >/dev/null; then
+        echo "Adding user $RUN_UID with name appuser"
+        useradd -u "$RUN_UID" -g "$RUN_GID" -d "$DEFAULT_RUNTIME_HOME" -s /sbin/nologin appuser
+    fi
+
+    # Get username for the UID (whether we just created it or it existed)
+    USERNAME=$(getent passwd "$RUN_UID" | cut -d: -f1)
+    if [ -z "$USERNAME" ]; then
+        USERNAME="$RUN_UID"
+    fi
+    TARGET_USER_SPEC="${RUN_UID}:${RUN_GID}"
 fi
 
-# Set GID if not set
-if [ -z "$GID" ]; then
-    GID=100
-fi
+# Avoid unnecessary gosu hops when we're already running as the target user.
+# Some nested LXC setups spin on root-to-root gosu invocations.
+needs_user_switch() {
+    local current_uid
+    local current_gid
 
-if ! getent group "$GID" >/dev/null; then
-    echo "Adding group $GID with name appuser"
-    groupadd -g "$GID" appuser
-fi
+    current_uid=$(id -u)
+    current_gid=$(id -g)
 
-# Create user if it doesn't exist
-if ! id -u "$UID" >/dev/null 2>&1; then
-    echo "Adding user $UID with name appuser"
-    useradd -u "$UID" -g "$GID" -d /app -s /sbin/nologin appuser
-fi
+    [ "$current_uid" != "$RUN_UID" ] || [ "$current_gid" != "$RUN_GID" ]
+}
 
-# Get username for the UID (whether we just created it or it existed)
-USERNAME=$(getent passwd "$UID" | cut -d: -f1)
-echo "Username for UID $UID is $USERNAME"
+run_as_target_user() {
+    if needs_user_switch; then
+        gosu "$TARGET_USER_SPEC" "$@"
+        return $?
+    fi
+
+    "$@"
+}
+
+exec_as_target_user() {
+    if needs_user_switch; then
+        exec gosu "$TARGET_USER_SPEC" "$@"
+    fi
+
+    exec "$@"
+}
 
 test_write() {
-    folder=$1
-    test_file=$folder/calibre-web-automated-book-downloader_TEST_WRITE
-    mkdir -p $folder
-    (
-        echo 0123456789_TEST | sudo -E -u "$USERNAME" HOME=/app tee $test_file > /dev/null
-    )
-    FILE_CONTENT=$(cat $test_file || echo "")
-    rm -f $test_file
+    local folder=$1
+    local test_file="$folder/shelfmark_TEST_WRITE"
+    local FILE_CONTENT
+    local result
+    local result_text
+
+    if ! mkdir -p "$folder"; then
+        echo "Failed to create directory for write test: $folder"
+        return 1
+    fi
+
+    # This is a probe: a failure here is expected (e.g. a fresh root-owned bind
+    # mount) and is recovered by the caller via change_ownership + re-probe. Hide
+    # the shell's "Permission denied"/"Read-only file system" stderr so a handled
+    # probe miss doesn't masquerade as a real boot failure in the logs.
+    if ! run_as_target_user sh -c 'echo 0123456789_TEST 2>/dev/null > "$1"' _ "$test_file"; then
+        echo "Failed to write test file in $folder as $USERNAME"
+        return 1
+    fi
+
+    FILE_CONTENT=$(cat "$test_file" 2>/dev/null || echo "")
+    # A folder can be writable but not deletable (e.g. a Synology share without
+    # "Delete subfolders and files"). That is not a boot failure - the app writes
+    # files in place on such shares - so don't let a failed cleanup print an
+    # alarming error or fail the probe.
+    run_as_target_user rm -f "$test_file" 2>/dev/null || \
+        echo "Note: could not remove test file in $folder (folder is writable but not deletable)"
     [ "$FILE_CONTENT" = "0123456789_TEST" ]
     result=$?
     if [ $result -eq 0 ]; then
@@ -74,52 +279,232 @@ test_write() {
 }
 
 make_writable() {
-    folder=$1
+    local folder="$1"
+    local mode="${2:-tree}"
+    local did_full_chown=0
+    local is_writable
     set +e
-    test_write $folder
+    test_write "$folder"
     is_writable=$?
     set -e
     if [ $is_writable -eq 0 ]; then
         echo "Folder $folder is writable, no need to change ownership"
     else
-        echo "Folder $folder is not writable, changing ownership"
-        change_ownership $folder
-        chmod g+r,g+w $folder || echo "Failed to change group permissions for ${folder}, continuing..."
+        if [ "$mode" = "root" ]; then
+            echo "Folder $folder is not writable, fixing top-level ownership and permissions"
+            mkdir -p "$folder"
+            chown "${RUN_UID}:${RUN_GID}" "$folder" || echo "Failed to change ownership for ${folder}, continuing..."
+            chmod u+rwx "$folder" || echo "Failed to change owner permissions for ${folder}, continuing..."
+        else
+            echo "Folder $folder is not writable, changing ownership"
+            change_ownership "$folder"
+            chmod -R g+r,g+w "$folder" || echo "Failed to change group permissions for ${folder}, continuing..."
+        fi
+        did_full_chown=1
     fi
-    test_write $folder || echo "Failed to test write to ${folder}, continuing..."
+    # Fix any misowned subdirectories/files (e.g., from previous runs as root)
+    if [ "$mode" = "tree" ] && [ "$did_full_chown" -eq 0 ] && [ -d "$folder" ]; then
+        echo "Checking for misowned files/directories in $folder"
+        # Stay on the same filesystem to avoid traversing mounted subpaths
+        # (for example read-only bind mounts under /app in dev setups).
+        find "$folder" -xdev -mindepth 1 \( ! -user "$RUN_UID" -o ! -group "$RUN_GID" \) \
+            -exec chown "$RUN_UID:$RUN_GID" {} + 2>/dev/null || true
+    fi
+    test_write "$folder" || echo "Failed to test write to ${folder}, continuing..."
+}
+
+fix_misowned() {
+    local folder="$1"
+    mkdir -p "$folder"
+    echo "Checking for misowned files/directories in $folder"
+    # Stay on the same filesystem to avoid traversing mounted subpaths
+    # (for example read-only bind mounts under /app in dev setups).
+    find "$folder" -xdev \( ! -user "$RUN_UID" -o ! -group "$RUN_GID" \) \
+        -exec chown "$RUN_UID:$RUN_GID" {} + 2>/dev/null || true
 }
 
 # Ensure proper ownership of application directories
 change_ownership() {
-  folder=$1
-  mkdir -p $folder
-  echo "Changing ownership of $folder to $USERNAME:$GID"
-  chown -R "${UID}" "${folder}" || echo "Failed to change user ownership for ${folder}, continuing..."
-  chown -R ":${GID}" "${folder}" || echo "Failed to change group ownership for ${folder}, continuing..."
+  local folder="$1"
+  mkdir -p "$folder"
+  echo "Changing ownership of $folder to $USERNAME:$RUN_GID"
+  chown -R "${RUN_UID}:${RUN_GID}" "${folder}" || echo "Failed to change ownership for ${folder}, continuing..."
 }
 
-change_ownership /app
-change_ownership /var/log/cwa-book-downloader
-change_ownership /tmp/cwa-book-downloader
+require_writable_dir() {
+    local folder="$1"
+    local label="${2:-Directory}"
 
-# Test write to all folders
-make_writable /cwa-book-ingest
+    if ! mkdir -p "$folder"; then
+        echo "Failed to create ${label} directory: $folder"
+        exit 1
+    fi
 
-# Set the command to run based on the environment
-is_prod=$(echo "$APP_ENV" | tr '[:upper:]' '[:lower:]')
-if [ "$is_prod" = "prod" ]; then 
-    command="gunicorn -t 300 -b ${FLASK_HOST:-0.0.0.0}:${FLASK_PORT:-8084} app:app"
+    if ! test_write "$folder"; then
+        echo "${label} directory is not writable in non-root mode: $folder"
+        echo "Prepare ownership outside the container (for example with a pre-owned volume or Kubernetes fsGroup)."
+        exit 1
+    fi
+}
+
+fail_unwritable_config_dir() {
+    local folder="$1"
+    local owner
+
+    owner=$(stat -c '%u:%g' "$folder" 2>/dev/null || echo "unknown")
+
+    echo ""
+    echo "========================================================"
+    echo "ERROR: Config directory is not writable!"
+    echo ""
+    echo "Config directory: $folder"
+    echo "Current owner: $owner"
+    echo "Configured runtime identity: ${RUN_UID}:${RUN_GID}"
+    echo ""
+    echo "To fix this permanently, run on your HOST machine:"
+    echo "  chown -R $RUN_UID:$RUN_GID /path/to/config"
+    echo "========================================================"
+    echo ""
+    exit 1
+}
+
+resolve_runtime_home() {
+    local runtime_home
+
+    runtime_home=$(getent passwd "$RUN_UID" 2>/dev/null | cut -d: -f6 || true)
+    case "$runtime_home" in
+        ""|/|/app|/nonexistent)
+            runtime_home="$DEFAULT_RUNTIME_HOME"
+            ;;
+    esac
+
+    printf '%s\n' "$runtime_home"
+}
+
+ensure_tree_writable() {
+    local folder="$1"
+
+    make_writable "$folder"
+    if [ -d "$folder" ]; then
+        chmod -R u+rwX,g+rwX "$folder" || echo "Failed to relax permissions for ${folder}, continuing..."
+    fi
+}
+
+ensure_symlinked_dir() {
+    local link_path="$1"
+    local target_path="$2"
+
+    ensure_tree_writable "$target_path"
+
+    if [ -L "$link_path" ]; then
+        local current_target
+        current_target=$(readlink "$link_path" 2>/dev/null || echo "")
+        if [ "$current_target" = "$target_path" ]; then
+            echo "$link_path already points to $target_path"
+            return 0
+        fi
+        echo "Replacing symlink $link_path -> $current_target with $target_path"
+        rm -f "$link_path" || echo "Failed to replace symlink ${link_path}, continuing..."
+    elif [ -d "$link_path" ]; then
+        echo "Moving existing scratch files from $link_path to $target_path"
+        find "$link_path" -xdev -mindepth 1 -maxdepth 1 -exec mv -t "$target_path" {} + 2>/dev/null || true
+        ensure_tree_writable "$target_path"
+
+        if ! rmdir "$link_path" 2>/dev/null; then
+            echo "Could not replace $link_path with symlink, leaving existing directory in place"
+            ensure_tree_writable "$link_path"
+            return 0
+        fi
+    elif [ -e "$link_path" ]; then
+        echo "$link_path exists and is not a directory, leaving it in place"
+        return 0
+    fi
+
+    if [ ! -e "$link_path" ]; then
+        ln -s "$target_path" "$link_path" || echo "Failed to create symlink ${link_path}, continuing..."
+    fi
+}
+
+if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+    require_writable_dir /tmp/shelfmark "Temporary"
+
+    if [ "${USING_EXTERNAL_BYPASSER}" != "true" ]; then
+        require_writable_dir /tmp/shelfmark/seleniumbase/downloaded_files "SeleniumBase downloads"
+        require_writable_dir /tmp/shelfmark/seleniumbase/archived_files "SeleniumBase archive"
+    fi
+
+    require_writable_dir "${CONFIG_DIR:-/config}" "Config"
 else
-    command="python3 app.py"
+    fix_misowned /var/log/shelfmark
+    fix_misowned /tmp/shelfmark
+
+    # Keep SeleniumBase on its default /app-based paths, but redirect the scratch
+    # directories into /tmp so bypasser startup doesn't depend on image-layer writes.
+    if [ "${USING_EXTERNAL_BYPASSER}" != "true" ]; then
+        ensure_symlinked_dir /app/downloaded_files /tmp/shelfmark/seleniumbase/downloaded_files
+        ensure_symlinked_dir /app/archived_files /tmp/shelfmark/seleniumbase/archived_files
+
+        # Keep SeleniumBase's bundled drivers directory writable as well for
+        # compatibility with legacy UC code paths that still probe bundled assets.
+        set +e
+        SELENIUMBASE_DRIVERS_DIR=$("$PYTHON_BIN" -c "import pathlib, seleniumbase; print(pathlib.Path(seleniumbase.__file__).resolve().parent / 'drivers')" 2>/dev/null)
+        set -e
+
+        if [ -n "$SELENIUMBASE_DRIVERS_DIR" ] && [ -d "$SELENIUMBASE_DRIVERS_DIR" ]; then
+            change_ownership "$SELENIUMBASE_DRIVERS_DIR"
+
+            # If the legacy driver already exists, ensure it's executable for the runtime user.
+            if [ -f "${SELENIUMBASE_DRIVERS_DIR}/uc_driver" ]; then
+                chmod +x "${SELENIUMBASE_DRIVERS_DIR}/uc_driver" || echo "Failed to chmod uc_driver, continuing..."
+            fi
+        fi
+    fi
+
+    # Config is Shelfmark-owned state, so it keeps the thorough repair path.
+    make_writable "${CONFIG_DIR:-/config}" tree
+
+    # Refuse to continue if the config directory is still not writable after repair.
+    CONFIG_PATH=${CONFIG_DIR:-/config}
+    set +e
+    test_write "$CONFIG_PATH" >/dev/null 2>&1
+    config_ok=$?
+    set -e
+
+    if [ $config_ok -ne 0 ]; then
+        fail_unwritable_config_dir "$CONFIG_PATH"
+    fi
+
+    # The ingest/destination library (default /books) is user data and may be a
+    # bind mount owned by another uid; downloads fail with "Destination not
+    # writable" if the runtime user can't write there. Fix the top-level dir only
+    # (root mode) so we don't recursively chown a potentially huge library.
+    make_writable "${INGEST_DIR:-/books}" root
 fi
 
+# Always run Gunicorn (even when DEBUG=true) to ensure Socket.IO WebSocket
+# upgrades work reliably on customer machines.
+# Map app LOG_LEVEL (often DEBUG/INFO/...) to gunicorn's --log-level (lowercase).
+# Gunicorn rejects anything outside its own list, so normalize and fall back to
+# info rather than letting a typo stop the container from booting.
+if [ "$DEBUG" = "true" ]; then
+    gunicorn_loglevel=debug
+else
+    gunicorn_loglevel=$(echo "${LOG_LEVEL:-info}" | tr '[:upper:]' '[:lower:]')
+    [ "$gunicorn_loglevel" = "warn" ] && gunicorn_loglevel=warning
+    case "$gunicorn_loglevel" in
+        debug|info|warning|error|critical) ;;
+        *) gunicorn_loglevel=info ;;
+    esac
+fi
+command="${GUNICORN_BIN} --log-level ${gunicorn_loglevel} --access-logfile - --error-logfile - --worker-class geventwebsocket.gunicorn.workers.GeventWebSocketWorker --workers 1 -t 300 -b ${FLASK_HOST:-0.0.0.0}:${FLASK_PORT:-8084} shelfmark.main:app"
+
 # If DEBUG and not using an external bypass
 if [ "$DEBUG" = "true" ] && [ "$USING_EXTERNAL_BYPASSER" != "true" ]; then
     set +e
     set -x
     echo "vvvvvvvvvvvv DEBUG MODE vvvvvvvvvvvv"
     echo "Starting Xvfb for debugging"
-    python3 -c "from pyvirtualdisplay import Display; Display(visible=False, size=(1440,1880)).start()"
+    "$PYTHON_BIN" -c "from pyvirtualdisplay import Display; Display(visible=False, size=(1440,1880)).start()"
     id
     free -h
     uname -a
@@ -139,7 +524,7 @@ if [ "$DEBUG" = "true" ] && [ "$USING_EXTERNAL_BYPASSER" != "true" ]; then
             --enable-logging --v=1 --log-level=0 \
             --log-file=/tmp/chrome_entrypoint_test.log \
             --crash-dumps-dir=/tmp/chrome_crash_dumps \
-            < /dev/null 
+            < /dev/null
     EXIT_CODE=$?
     echo "Chrome exit code: $EXIT_CODE"
     ls -lh /tmp/chrome_entrypoint_test.log
@@ -167,18 +552,41 @@ if [ "$DEBUG" = "true" ] && [ "$USING_EXTERNAL_BYPASSER" != "true" ]; then
     echo "^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"
 fi
 
-# Hacky way to verify /tmp has at least 1MB of space and is writable/readable
+# Verify /tmp has at least 1MB of space and is writable/readable
 echo "Verifying /tmp has enough space"
-rm -f /tmp/test.cwa-bd
-for i in {1..150000}; do printf "%04d\n" $i; done > /tmp/test.cwa-bd
-sum=$(python3 -c "print(sum(int(l.strip()) for l in open('/tmp/test.cwa-bd').readlines()))")
-[ "$sum" == 11250075000 ] && echo "Success: /tmp is writable" || (echo "Failure: /tmp is not writable" && exit 1)
-rm /tmp/test.cwa-bd
+rm -f /tmp/test.shelfmark
+if dd if=/dev/zero of=/tmp/test.shelfmark bs=1M count=1 2>/dev/null && \
+   [ "$(wc -c < /tmp/test.shelfmark)" -eq 1048576 ]; then
+    rm -f /tmp/test.shelfmark
+    echo "Success: /tmp is writable and readable"
+else
+    echo "Failure: /tmp is not writable or has insufficient space"
+    exit 1
+fi
 
-echo "Running command: '$command' as '$USERNAME' in '$APP_ENV' mode"
+RUNTIME_HOME=$(resolve_runtime_home)
+if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+    require_writable_dir "$RUNTIME_HOME" "Home"
+else
+    mkdir -p "$RUNTIME_HOME"
+    make_writable "$RUNTIME_HOME" tree
+fi
 
-# Stop logging
-exec 1>&3 2>&4
-exec 3>&- 4>&-
+if [ "$RUN_AS_NON_ROOT" = "true" ]; then
+    echo "Startup mode: non-root"
+elif [ "$RUN_UID" = "0" ] && [ "$RUN_GID" = "0" ]; then
+    echo "Startup mode: root"
+else
+    echo "Startup mode: root bootstrap with privilege drop"
+fi
+echo "Runtime identity: $USERNAME (${RUN_UID}:${RUN_GID})"
 
-exec sudo -E -u "$USERNAME" HOME=/app $command
+echo "Running command: '$command' as '$USERNAME' (debug=${DEBUG:-false})"
+
+# Set umask for file permissions (default: 0022 = files 644, dirs 755)
+UMASK_VALUE=${UMASK:-0022}
+echo "Setting umask to $UMASK_VALUE"
+umask $UMASK_VALUE
+
+stop_file_logging
+exec_as_target_user env HOME="$RUNTIME_HOME" $command

env.py

@@ -1,67 +0,0 @@
-import os
-from pathlib import Path
-
-def string_to_bool(s: str) -> bool:
-    return s.lower() in ["true", "yes", "1", "y"]
-
-CWA_DB = os.getenv("CWA_DB_PATH")
-CWA_DB_PATH = Path(CWA_DB) if CWA_DB else None
-LOG_ROOT = Path(os.getenv("LOG_ROOT", "/var/log/"))
-LOG_DIR = LOG_ROOT / "cwa-book-downloader"
-TMP_DIR = Path(os.getenv("TMP_DIR", "/tmp/cwa-book-downloader"))
-INGEST_DIR = Path(os.getenv("INGEST_DIR", "/cwa-book-ingest"))
-STATUS_TIMEOUT = int(os.getenv("STATUS_TIMEOUT", "3600"))
-USE_BOOK_TITLE = string_to_bool(os.getenv("USE_BOOK_TITLE", "false"))
-MAX_RETRY = int(os.getenv("MAX_RETRY", "10"))
-DEFAULT_SLEEP = int(os.getenv("DEFAULT_SLEEP", "5"))
-USE_CF_BYPASS = string_to_bool(os.getenv("USE_CF_BYPASS", "true"))
-HTTP_PROXY = os.getenv("HTTP_PROXY", "").strip()
-HTTPS_PROXY = os.getenv("HTTPS_PROXY", "").strip()
-AA_DONATOR_KEY = os.getenv("AA_DONATOR_KEY", "").strip()
-_AA_BASE_URL = os.getenv("AA_BASE_URL", "auto").strip()
-_AA_ADDITIONAL_URLS = os.getenv("AA_ADDITIONAL_URLS", "").strip()
-_SUPPORTED_FORMATS = os.getenv("SUPPORTED_FORMATS", "epub,mobi,azw3,fb2,djvu,cbz,cbr").lower()
-_BOOK_LANGUAGE = os.getenv("BOOK_LANGUAGE", "en").lower()
-_CUSTOM_SCRIPT = os.getenv("CUSTOM_SCRIPT", "").strip()
-FLASK_HOST = os.getenv("FLASK_HOST", "0.0.0.0")
-FLASK_PORT = int(os.getenv("FLASK_PORT", "8084"))
-DEBUG = string_to_bool(os.getenv("DEBUG", "false"))
-APP_ENV = os.getenv("APP_ENV", "N/A").lower()
-PRIORITIZE_WELIB = string_to_bool(os.getenv("PRIORITIZE_WELIB", "false"))
-ALLOW_USE_WELIB = string_to_bool(os.getenv("ALLOW_USE_WELIB", "true"))
-
-# Version information from Docker build
-BUILD_VERSION = os.getenv("BUILD_VERSION", "N/A")
-RELEASE_VERSION = os.getenv("RELEASE_VERSION", "N/A")
-
-# If debug is true, we want to log everything
-if DEBUG:
-    LOG_LEVEL = "DEBUG"
-else:
-    LOG_LEVEL = os.getenv("LOG_LEVEL", "INFO").upper()
-ENABLE_LOGGING = string_to_bool(os.getenv("ENABLE_LOGGING", "true"))
-MAIN_LOOP_SLEEP_TIME = int(os.getenv("MAIN_LOOP_SLEEP_TIME", "5"))
-MAX_CONCURRENT_DOWNLOADS = int(os.getenv("MAX_CONCURRENT_DOWNLOADS", "3"))
-DOWNLOAD_PROGRESS_UPDATE_INTERVAL = int(os.getenv("DOWNLOAD_PROGRESS_UPDATE_INTERVAL", "5"))
-DOCKERMODE = string_to_bool(os.getenv("DOCKERMODE", "false"))
-_CUSTOM_DNS = os.getenv("CUSTOM_DNS", "").strip()
-USE_DOH = string_to_bool(os.getenv("USE_DOH", "false"))
-BYPASS_RELEASE_INACTIVE_MIN = int(os.getenv("BYPASS_RELEASE_INACTIVE_MIN", "5"))
-
-# Logging settings
-LOG_FILE = LOG_DIR / "cwa-book-downloader.log"
-
-USING_EXTERNAL_BYPASSER = string_to_bool(os.getenv("USING_EXTERNAL_BYPASSER", "false"))
-if USING_EXTERNAL_BYPASSER:
-    EXT_BYPASSER_URL = os.getenv("EXT_BYPASSER_URL", "http://flaresolverr:8191").strip()
-    EXT_BYPASSER_PATH = os.getenv("EXT_BYPASSER_PATH", "/v1").strip()
-    EXT_BYPASSER_TIMEOUT = int(os.getenv("EXT_BYPASSER_TIMEOUT", "60000"))
-
-USING_TOR = string_to_bool(os.getenv("USING_TOR", "false"))
-# If using Tor, we don't need to set custom DNS, use DOH, or proxy
-if USING_TOR:
-    _CUSTOM_DNS = ""
-    USE_DOH = False
-    HTTP_PROXY = ""
-    HTTPS_PROXY = ""
-    

genDebug.sh

@@ -2,8 +2,8 @@
 
 # Set up log paths
 LOG_ROOT=${LOG_ROOT:-"/var/log"}
-LOG_DIR="$LOG_ROOT/cwa-book-downloader"
-OUTPUT_FILE_NAME="cwa-book-downloader-debug_BUILD-${BUILD_VERSION:-local}_RELEASE-${RELEASE_VERSION:-NA}_$(date +%Y%m%d-%H%M%S)"
+LOG_DIR="$LOG_ROOT/shelfmark"
+OUTPUT_FILE_NAME="shelfmark-debug_BUILD-${BUILD_VERSION:-local}_RELEASE-${RELEASE_VERSION:-NA}_$(date +%Y%m%d-%H%M%S)"
 OUTPUT_FILE="/tmp/$OUTPUT_FILE_NAME.zip"
 
 # Create LOG_DIR if it doesn't exist
@@ -18,17 +18,17 @@ echo "" >> "$LOG_DIR/system_info.txt"
 
 # Add disk usage
 echo "=== Disk Usage ===" >> "$LOG_DIR/system_info.txt"
-df -h >> "$LOG_DIR/system_info.txt"
+df -h >> "$LOG_DIR/system_info.txt" 2>&1
 echo "" >> "$LOG_DIR/system_info.txt"
 
 # Add memory info
 echo "=== Memory Info ===" >> "$LOG_DIR/system_info.txt"
-free -h >> "$LOG_DIR/system_info.txt"
+free -h >> "$LOG_DIR/system_info.txt" 2>&1
 echo "" >> "$LOG_DIR/system_info.txt"
 
 # Add running processes
 echo "=== Running Processes ===" >> "$LOG_DIR/system_info.txt"
-ps aux >> "$LOG_DIR/system_info.txt"
+ps aux >> "$LOG_DIR/system_info.txt" 2>&1
 echo "" >> "$LOG_DIR/system_info.txt"
 
 # Add network information using basic commands
@@ -37,17 +37,17 @@ echo "=== Network Information ===" > "$LOG_DIR/network_info.txt"
 # Try to get basic connectivity information
 echo "=== Basic Connectivity ===" >> "$LOG_DIR/network_info.txt"
 echo "Hostname resolution:" >> "$LOG_DIR/network_info.txt"
-cat /etc/hosts 2>/dev/null >> "$LOG_DIR/network_info.txt" || echo "Unable to read /etc/hosts" >> "$LOG_DIR/network_info.txt"
+cat /etc/hosts >> "$LOG_DIR/network_info.txt" 2>&1 || echo "Unable to read /etc/hosts" >> "$LOG_DIR/network_info.txt"
 echo "" >> "$LOG_DIR/network_info.txt"
 
 echo "DNS configuration:" >> "$LOG_DIR/network_info.txt"
-cat /etc/resolv.conf 2>/dev/null >> "$LOG_DIR/network_info.txt" || echo "Unable to read /etc/resolv.conf" >> "$LOG_DIR/network_info.txt"
+cat /etc/resolv.conf >> "$LOG_DIR/network_info.txt" 2>&1 || echo "Unable to read /etc/resolv.conf" >> "$LOG_DIR/network_info.txt"
 echo "" >> "$LOG_DIR/network_info.txt"
 
 # Try to get interface information from /proc
 echo "=== Network Interfaces (/proc) ===" >> "$LOG_DIR/network_info.txt"
 if [ -f "/proc/net/dev" ]; then
-  cat /proc/net/dev >> "$LOG_DIR/network_info.txt"
+  cat /proc/net/dev >> "$LOG_DIR/network_info.txt" 2>&1
 else
   echo "Not available: /proc/net/dev not found" >> "$LOG_DIR/network_info.txt"
 fi
@@ -55,9 +55,9 @@ echo "" >> "$LOG_DIR/network_info.txt"
 
 # Try connectivity tests
 echo "=== Internet Connectivity ===" >> "$LOG_DIR/network_info.txt"
-ping -c 3 1.1.1.1 2>/dev/null >> "$LOG_DIR/network_info.txt" || echo "Ping command failed or not available" >> "$LOG_DIR/network_info.txt"
+ping -c 3 1.1.1.1 >> "$LOG_DIR/network_info.txt" 2>&1 || echo "Ping command failed or not available" >> "$LOG_DIR/network_info.txt"
 echo "" >> "$LOG_DIR/network_info.txt"
-ping -c 3 one.one.one.one 2>/dev/null >> "$LOG_DIR/network_info.txt" || echo "DNS resolution test failed" >> "$LOG_DIR/network_info.txt"
+ping -c 3 one.one.one.one >> "$LOG_DIR/network_info.txt" 2>&1 || echo "DNS resolution test failed" >> "$LOG_DIR/network_info.txt"
 echo "" >> "$LOG_DIR/network_info.txt"
 
 # Test IPv6 connectivity
@@ -77,7 +77,7 @@ echo "" >> "$LOG_DIR/network_info.txt"
 
 # Try IPv6 connectivity test using Cloudflare's IPv6 DNS
 echo "Testing IPv6 connectivity to Cloudflare DNS:" >> "$LOG_DIR/network_info.txt"
-ping6 -c 3 2606:4700:4700::1111 2>/dev/null >> "$LOG_DIR/network_info.txt" || echo "IPv6 ping failed or not available" >> "$LOG_DIR/network_info.txt"
+ping6 -c 3 2606:4700:4700::1111 >> "$LOG_DIR/network_info.txt" 2>&1 || echo "IPv6 ping failed or not available" >> "$LOG_DIR/network_info.txt"
 echo "" >> "$LOG_DIR/network_info.txt"
 
 # Test SSL connectivity
@@ -92,24 +92,36 @@ echo "" >> "$LOG_DIR/network_info.txt"
 
 # Add installed packages
 echo "=== Installed Python Packages ===" > "$LOG_DIR/packages.txt"
-pip list 2>/dev/null >> "$LOG_DIR/packages.txt" || echo "pip not found" >> "$LOG_DIR/packages.txt"
+pip list >> "$LOG_DIR/packages.txt" 2>&1 || echo "pip not found" >> "$LOG_DIR/packages.txt"
 echo "" >> "$LOG_DIR/packages.txt"
 
 # Check Permissions
 echo "=== Permissions ===" > "$LOG_DIR/permissions.txt"
 echo "ls -all /app" >> "$LOG_DIR/permissions.txt"
-ls -all /app >> "$LOG_DIR/permissions.txt"
+ls -all /app >> "$LOG_DIR/permissions.txt" 2>&1
 echo "" >> "$LOG_DIR/permissions.txt"
-echo "ls -all /cwa-book-ingest" >> "$LOG_DIR/permissions.txt"
-ls -all /cwa-book-ingest >> "$LOG_DIR/permissions.txt"
+echo "ls -all ${INGEST_DIR:-/books}" >> "$LOG_DIR/permissions.txt"
+ls -all ${INGEST_DIR:-/books} >> "$LOG_DIR/permissions.txt" 2>&1
 echo "" >> "$LOG_DIR/permissions.txt"
-echo "ls -all /var/log/cwa-book-downloader" >> "$LOG_DIR/permissions.txt"
-ls -all /var/log/cwa-book-downloader >> "$LOG_DIR/permissions.txt"
+echo "ls -all /var/log/shelfmark" >> "$LOG_DIR/permissions.txt"
+ls -all /var/log/shelfmark >> "$LOG_DIR/permissions.txt" 2>&1
 echo "" >> "$LOG_DIR/permissions.txt"
-echo "ls -all /tmp/cwa-book-downloader" >> "$LOG_DIR/permissions.txt"
-ls -all /tmp/cwa-book-downloader >> "$LOG_DIR/permissions.txt"
+echo "ls -all /tmp/shelfmark" >> "$LOG_DIR/permissions.txt"
+ls -all /tmp/shelfmark >> "$LOG_DIR/permissions.txt" 2>&1
 echo "" >> "$LOG_DIR/permissions.txt"
 
+# Check Iptables (NAT)
+echo "=== IPtables NAT Rules ===" > "$LOG_DIR/iptables_nat.txt"
+iptables -t nat -L -v -n >> "$LOG_DIR/iptables_nat.txt" 2>&1
+
+# Check DNS Resolution details
+echo "=== DNS Resolution Test ===" > "$LOG_DIR/dns_test.txt"
+echo "Resolving google.com:" >> "$LOG_DIR/dns_test.txt"
+nslookup google.com >> "$LOG_DIR/dns_test.txt" 2>&1
+echo "" >> "$LOG_DIR/dns_test.txt"
+echo "Resolving check.torproject.org:" >> "$LOG_DIR/dns_test.txt"
+nslookup check.torproject.org >> "$LOG_DIR/dns_test.txt" 2>&1
+
 
 # Check if running in Docker
 echo "=== Container Info ===" > "$LOG_DIR/container_info.txt"
@@ -122,19 +134,58 @@ else
 fi
 
 # Add environment variables (redacting sensitive info)
-env | grep -v -E "(AA_DONATOR_KEY)" | sort > "$LOG_DIR/environment.txt"
+env | grep -v -E "(AA_DONATOR_KEY|HARDCOVER_API_KEY|_KEY=|_SECRET=|_PASSWORD=|_TOKEN=)" | sort > "$LOG_DIR/environment.txt"
 
-echo "--- HTTPBin ---" > $LOG_DIR/network_info.txt
-curl -s https://httpbin.org/get >> $LOG_DIR/network_info.txt
-ehco ""
+# Add configuration files (redacting sensitive values)
+CONFIG_DIR=${CONFIG_DIR:-"/config"}
+if [ -d "$CONFIG_DIR" ]; then
+  mkdir -p "$LOG_DIR/config"
+
+  # Copy and redact main settings file
+  if [ -f "$CONFIG_DIR/settings.json" ]; then
+    # Redact sensitive fields (API keys, passwords, tokens)
+    sed -E 's/("(AA_DONATOR_KEY|HARDCOVER_API_KEY|[^"]*_KEY|[^"]*_SECRET|[^"]*_PASSWORD|[^"]*_TOKEN)"[[:space:]]*:[[:space:]]*")[^"]+"/\1[REDACTED]"/g' \
+      "$CONFIG_DIR/settings.json" > "$LOG_DIR/config/settings.json" 2>/dev/null
+  fi
+
+  # Copy and redact plugin config files
+  if [ -d "$CONFIG_DIR/plugins" ]; then
+    mkdir -p "$LOG_DIR/config/plugins"
+    for config_file in "$CONFIG_DIR/plugins"/*.json; do
+      if [ -f "$config_file" ]; then
+        filename=$(basename "$config_file")
+        sed -E 's/("(AA_DONATOR_KEY|HARDCOVER_API_KEY|[^"]*_KEY|[^"]*_SECRET|[^"]*_PASSWORD|[^"]*_TOKEN)"[[:space:]]*:[[:space:]]*")[^"]+"/\1[REDACTED]"/g' \
+          "$config_file" > "$LOG_DIR/config/plugins/$filename" 2>/dev/null
+      fi
+    done
+  fi
+
+  echo "Configuration files copied (sensitive values redacted)" >> "$LOG_DIR/container_info.txt"
+else
+  echo "Config directory not found at $CONFIG_DIR" >> "$LOG_DIR/container_info.txt"
+fi
+
+echo "--- HTTPBin ---" >> $LOG_DIR/network_info.txt
+curl -s https://httpbin.org/get >> $LOG_DIR/network_info.txt 2>&1
+echo "" >> $LOG_DIR/network_info.txt
 echo "--- HowsMySSL ---" >> $LOG_DIR/network_info.txt
-curl -s https://www.howsmyssl.com/a/check >> $LOG_DIR/network_info.txt
-ehco ""
+curl -s https://www.howsmyssl.com/a/check >> $LOG_DIR/network_info.txt 2>&1
+echo "" >> $LOG_DIR/network_info.txt
 echo "--- IPInfo ---" >> $LOG_DIR/network_info.txt
-curl -s https://ipinfo.io >> $LOG_DIR/network_info.txt
-ehco ""
+curl -s https://ipinfo.io >> $LOG_DIR/network_info.txt 2>&1
+echo "" >> $LOG_DIR/network_info.txt
 echo "--- Cloudflare Trace ---" >> $LOG_DIR/network_info.txt
-curl -s https://1.1.1.1/cdn-cgi/trace >> $LOG_DIR/network_info.txt
+curl -s https://1.1.1.1/cdn-cgi/trace >> $LOG_DIR/network_info.txt 2>&1
+
+# Copy Tor logs if they exist
+if [ -f "/var/log/tor/notices.log" ]; then
+  cp "/var/log/tor/notices.log" "$LOG_DIR/tor_notices.log"
+fi
+
+# Copy Supervisor logs if they exist
+if [ -d "/var/log/supervisor" ]; then
+  cp -rf "/var/log/supervisor/" "$LOG_DIR/supervisor/"
+fi
 
 # Create the zip file directly from LOG_DIR
 ln -s "$LOG_DIR" /tmp/$OUTPUT_FILE_NAME
@@ -148,4 +199,3 @@ else
   echo "Failed to create debug archive"
   exit 1
 fi
-

logger.py

@@ -1,104 +0,0 @@
-"""Centralized logging configuration for the book downloader application."""
-
-import logging
-import sys
-from pathlib import Path
-from logging.handlers import RotatingFileHandler
-from env import LOG_FILE, ENABLE_LOGGING, LOG_LEVEL
-from typing import Any
-
-class CustomLogger(logging.Logger):
-    """Custom logger class with additional error_trace method."""
-    
-    def error_trace(self, msg: Any, *args: Any, **kwargs: Any) -> None:
-        """Log an error message with full stack trace."""
-        self.log_resource_usage()
-        self.error(msg, *args, exc_info=True, **kwargs)
-
-    def warning_trace(self, msg: Any, *args: Any, **kwargs: Any) -> None:
-        """Log a warning message with full stack trace."""
-        self.log_resource_usage()
-        self.warning(msg, *args, exc_info=True, **kwargs)
-    
-    def info_trace(self, msg: Any, *args: Any, **kwargs: Any) -> None:
-        """Log an info message with full stack trace."""
-        self.log_resource_usage()
-        self.info(msg, *args, exc_info=True, **kwargs)
-    
-    def debug_trace(self, msg: Any, *args: Any, **kwargs: Any) -> None:
-        """Log a debug message with full stack trace."""
-        self.log_resource_usage()
-        self.debug(msg, *args, exc_info=True, **kwargs)
-    
-    def log_resource_usage(self):
-        import psutil
-        memory = psutil.virtual_memory()
-        available_mb = memory.available / (1024 * 1024)
-        memory_used_mb = memory.used / (1024 * 1024)
-        cpu_percent = psutil.cpu_percent()
-        self.debug(f"Container Memory: Available={available_mb:.2f} MB, Used={memory_used_mb:.2f} MB, CPU: {cpu_percent:.2f}%")
-
-
-def setup_logger(name: str, log_file: Path = LOG_FILE) -> CustomLogger:
-    """Set up and configure a logger instance.
-    
-    Args:
-        name: The name of the logger instance
-        log_file: Optional path to log file. If None, logs only to stdout/stderr
-        
-    Returns:
-        CustomLogger: Configured logger instance with error_trace method
-    """
-    # Register our custom logger class
-    logging.setLoggerClass(CustomLogger)
-    
-    # Create logger as CustomLogger instance
-    logger = CustomLogger(name)
-    log_level = logging.INFO
-    if LOG_LEVEL == "DEBUG":
-        log_level = logging.DEBUG
-    elif LOG_LEVEL == "INFO":
-        log_level = logging.INFO
-    elif LOG_LEVEL == "WARNING":
-        log_level = logging.WARNING
-    elif LOG_LEVEL == "ERROR":
-        log_level = logging.ERROR
-    elif LOG_LEVEL == "CRITICAL":
-        log_level = logging.CRITICAL
-    logger.setLevel(log_level)
-    
-    formatter = logging.Formatter(
-        '%(asctime)s - %(name)s - %(levelname)s - %(filename)s:%(lineno)d - %(message)s'
-    )
-
-    # Console handler for Docker output
-    console_handler = logging.StreamHandler(sys.stdout)
-    console_handler.setFormatter(formatter)
-    console_handler.setLevel(log_level)
-    console_handler.addFilter(lambda record: record.levelno < logging.ERROR)  # Only allow logs below ERROR to stdout
-    logger.addHandler(console_handler)
-    
-    # Error handler for stderr
-    error_handler = logging.StreamHandler(sys.stderr)
-    error_handler.setLevel(logging.ERROR) # Error and above go to stderr
-    error_handler.setFormatter(formatter)
-    logger.addHandler(error_handler)
-    
-    # File handler if log file is specified
-    try:
-        if ENABLE_LOGGING:
-            # Create log directory if it doesn't exist
-            log_dir = log_file.parent
-            log_dir.mkdir(parents=True, exist_ok=True)
-            file_handler = RotatingFileHandler(
-                log_file,
-                maxBytes=10485760,  # 10MB
-                backupCount=5
-            )
-            file_handler.setFormatter(formatter)
-            logger.addHandler(file_handler)
-    except Exception as e:
-        logger.error_trace(f"Failed to create log file: {e}", exc_info=True)
-
-    return logger
-

models.py

@@ -1,348 +0,0 @@
-"""Data structures and models used across the application."""
-
-from dataclasses import dataclass, field
-from typing import Dict, List, Optional, Tuple
-from enum import Enum
-from datetime import datetime, timedelta
-from threading import Lock, Event
-from pathlib import Path
-import queue
-import time
-from env import INGEST_DIR, STATUS_TIMEOUT
-
-class QueueStatus(str, Enum):
-    """Enum for possible book queue statuses."""
-    QUEUED = "queued"
-    DOWNLOADING = "downloading"
-    AVAILABLE = "available"
-    ERROR = "error"
-    DONE = "done"
-    CANCELLED = "cancelled"
-
-@dataclass
-class QueueItem:
-    """Queue item with priority and metadata."""
-    book_id: str
-    priority: int
-    added_time: float
-    
-    def __lt__(self, other):
-        """Compare items for priority queue (lower priority number = higher precedence)."""
-        if self.priority != other.priority:
-            return self.priority < other.priority
-        return self.added_time < other.added_time
-
-@dataclass
-class BookInfo:
-    """Data class representing book information."""
-    id: str
-    title: str
-    preview: Optional[str] = None
-    author: Optional[str] = None
-    publisher: Optional[str] = None
-    year: Optional[str] = None
-    language: Optional[str] = None
-    format: Optional[str] = None
-    size: Optional[str] = None
-    info: Optional[Dict[str, List[str]]] = None
-    download_urls: List[str] = field(default_factory=list)
-    download_path: Optional[str] = None
-    priority: int = 0
-    progress: Optional[float] = None
-
-class BookQueue:
-    """Thread-safe book queue manager with priority support and cancellation."""
-    def __init__(self) -> None:
-        self._queue: queue.PriorityQueue[QueueItem] = queue.PriorityQueue()
-        self._lock = Lock()
-        self._status: dict[str, QueueStatus] = {}
-        self._book_data: dict[str, BookInfo] = {}
-        self._status_timestamps: dict[str, datetime] = {}  # Track when each status was last updated
-        self._status_timeout = timedelta(seconds=STATUS_TIMEOUT)  # 1 hour timeout
-        self._cancel_flags: dict[str, Event] = {}  # Cancellation flags for active downloads
-        self._active_downloads: dict[str, bool] = {}  # Track currently downloading books
-    
-    def add(self, book_id: str, book_data: BookInfo, priority: int = 0) -> None:
-        """Add a book to the queue with specified priority.
-        
-        Args:
-            book_id: Unique identifier for the book
-            book_data: Book information
-            priority: Priority level (lower number = higher priority)
-        """
-        with self._lock:
-            # Don't add if already exists and not in error/done state
-            if book_id in self._status and self._status[book_id] not in [QueueStatus.ERROR, QueueStatus.DONE, QueueStatus.CANCELLED]:
-                return
-                
-            book_data.priority = priority
-            queue_item = QueueItem(book_id, priority, time.time())
-            self._queue.put(queue_item)
-            self._book_data[book_id] = book_data
-            self._update_status(book_id, QueueStatus.QUEUED)
-    
-    def get_next(self) -> Optional[Tuple[str, Event]]:
-        """Get next book ID from queue with cancellation flag.
-        
-        Returns:
-            Tuple of (book_id, cancel_flag) or None if queue is empty
-        """
-        try:
-            queue_item = self._queue.get_nowait()
-            book_id = queue_item.book_id
-            
-            with self._lock:
-                # Check if book was cancelled while in queue
-                if book_id in self._status and self._status[book_id] == QueueStatus.CANCELLED:
-                    return self.get_next()  # Recursively get next non-cancelled item
-                
-                # Create cancellation flag for this download
-                cancel_flag = Event()
-                self._cancel_flags[book_id] = cancel_flag
-                self._active_downloads[book_id] = True
-                
-            return book_id, cancel_flag
-        except queue.Empty:
-            return None
-            
-    def _update_status(self, book_id: str, status: QueueStatus) -> None:
-        """Internal method to update status and timestamp."""
-        self._status[book_id] = status
-        self._status_timestamps[book_id] = datetime.now()
-            
-    def update_status(self, book_id: str, status: QueueStatus) -> None:
-        """Update status of a book in the queue."""
-        with self._lock:
-            self._update_status(book_id, status)
-            
-            # Clean up active download tracking when finished
-            if status in [QueueStatus.AVAILABLE, QueueStatus.ERROR, QueueStatus.DONE, QueueStatus.CANCELLED]:
-                self._active_downloads.pop(book_id, None)
-                self._cancel_flags.pop(book_id, None)
-    
-    def update_download_path(self, book_id: str, download_path: str) -> None:
-        """Update the download path of a book in the queue."""
-        with self._lock:
-            if book_id in self._book_data:
-                self._book_data[book_id].download_path = download_path
-                
-    def update_progress(self, book_id: str, progress: float) -> None:
-        """Update download progress for a book."""
-        with self._lock:
-            if book_id in self._book_data:
-                self._book_data[book_id].progress = progress
-            
-    def get_status(self) -> Dict[QueueStatus, Dict[str, BookInfo]]:
-        """Get current queue status."""
-        self.refresh()
-        with self._lock:
-            result: Dict[QueueStatus, Dict[str, BookInfo]] = {status: {} for status in QueueStatus}
-            for book_id, status in self._status.items():
-                if book_id in self._book_data:
-                    result[status][book_id] = self._book_data[book_id]
-            return result
-            
-    def get_queue_order(self) -> List[Dict[str, any]]:
-        """Get current queue order for display."""
-        with self._lock:
-            queue_items = []
-            
-            # Get items from priority queue without removing them
-            temp_items = []
-            while not self._queue.empty():
-                try:
-                    item = self._queue.get_nowait()
-                    temp_items.append(item)
-                    if item.book_id in self._book_data:
-                        book_info = self._book_data[item.book_id]
-                        queue_items.append({
-                            'id': item.book_id,
-                            'title': book_info.title,
-                            'author': book_info.author,
-                            'priority': item.priority,
-                            'added_time': item.added_time,
-                            'status': self._status.get(item.book_id, QueueStatus.QUEUED)
-                        })
-                except queue.Empty:
-                    break
-            
-            # Put items back in queue
-            for item in temp_items:
-                self._queue.put(item)
-                
-            return sorted(queue_items, key=lambda x: (x['priority'], x['added_time']))
-            
-    def cancel_download(self, book_id: str) -> bool:
-        """Cancel a download and mark it as cancelled.
-        
-        Args:
-            book_id: Book identifier to cancel
-            
-        Returns:
-            bool: True if cancellation was successful
-        """
-        with self._lock:
-            current_status = self._status.get(book_id)
-            
-            if current_status == QueueStatus.DOWNLOADING:
-                # Signal active download to stop
-                if book_id in self._cancel_flags:
-                    self._cancel_flags[book_id].set()
-                self._update_status(book_id, QueueStatus.CANCELLED)
-                return True
-            elif current_status == QueueStatus.QUEUED:
-                # Remove from queue and mark as cancelled
-                self._update_status(book_id, QueueStatus.CANCELLED)
-                return True
-            
-            return False
-            
-    def set_priority(self, book_id: str, new_priority: int) -> bool:
-        """Change the priority of a queued book.
-        
-        Args:
-            book_id: Book identifier
-            new_priority: New priority level (lower = higher priority)
-            
-        Returns:
-            bool: True if priority was successfully changed
-        """
-        with self._lock:
-            if book_id not in self._status or self._status[book_id] != QueueStatus.QUEUED:
-                return False
-                
-            # Remove book from queue and re-add with new priority
-            temp_items = []
-            found = False
-            
-            while not self._queue.empty():
-                try:
-                    item = self._queue.get_nowait()
-                    if item.book_id == book_id:
-                        # Create new item with updated priority
-                        new_item = QueueItem(book_id, new_priority, item.added_time)
-                        temp_items.append(new_item)
-                        found = True
-                        # Update book data priority
-                        if book_id in self._book_data:
-                            self._book_data[book_id].priority = new_priority
-                    else:
-                        temp_items.append(item)
-                except queue.Empty:
-                    break
-            
-            # Put all items back
-            for item in temp_items:
-                self._queue.put(item)
-                
-            return found
-            
-    def reorder_queue(self, book_priorities: Dict[str, int]) -> bool:
-        """Bulk reorder queue by setting new priorities.
-        
-        Args:
-            book_priorities: Dict mapping book_id to new priority
-            
-        Returns:
-            bool: True if reordering was successful
-        """
-        with self._lock:
-            # Extract all items from queue
-            all_items = []
-            while not self._queue.empty():
-                try:
-                    item = self._queue.get_nowait()
-                    # Update priority if specified
-                    if item.book_id in book_priorities:
-                        new_priority = book_priorities[item.book_id]
-                        item = QueueItem(item.book_id, new_priority, item.added_time)
-                        # Update book data priority
-                        if item.book_id in self._book_data:
-                            self._book_data[item.book_id].priority = new_priority
-                    all_items.append(item)
-                except queue.Empty:
-                    break
-            
-            # Put all items back with updated priorities
-            for item in all_items:
-                self._queue.put(item)
-                
-            return True
-            
-    def get_active_downloads(self) -> List[str]:
-        """Get list of currently active download book IDs."""
-        with self._lock:
-            return list(self._active_downloads.keys())
-            
-    def clear_completed(self) -> int:
-        """Remove all completed, errored, or cancelled books from tracking.
-        
-        Returns:
-            int: Number of books removed
-        """
-        with self._lock:
-            to_remove = []
-            for book_id, status in self._status.items():
-                if status in [QueueStatus.DONE, QueueStatus.ERROR, QueueStatus.CANCELLED]:
-                    to_remove.append(book_id)
-            
-            removed_count = len(to_remove)
-            for book_id in to_remove:
-                self._status.pop(book_id, None)
-                self._status_timestamps.pop(book_id, None)
-                self._book_data.pop(book_id, None)
-                self._cancel_flags.pop(book_id, None)
-                self._active_downloads.pop(book_id, None)
-                
-            return removed_count
-        
-    def refresh(self) -> None:
-        """Remove any books that are done downloading or have stale status."""
-        with self._lock:
-            current_time = datetime.now()
-            
-            # Create a list of items to remove to avoid modifying dict during iteration
-            to_remove = []
-            
-            for book_id, status in self._status.items():
-                path = self._book_data[book_id].download_path
-                if path and not Path(path).exists():
-                    self._book_data[book_id].download_path = None
-                    path = None
-                
-                # Check for completed downloads
-                if status == QueueStatus.AVAILABLE:
-                    if not path:
-                        self._update_status(book_id, QueueStatus.DONE)
-                
-                # Check for stale status entries
-                last_update = self._status_timestamps.get(book_id)
-                if last_update and (current_time - last_update) > self._status_timeout:
-                    if status in [QueueStatus.DONE, QueueStatus.ERROR, QueueStatus.AVAILABLE, QueueStatus.CANCELLED]:
-                        to_remove.append(book_id)
-            
-            # Remove stale entries
-            for book_id in to_remove:
-                del self._status[book_id]
-                del self._status_timestamps[book_id]
-                if book_id in self._book_data:
-                    del self._book_data[book_id]
-
-    def set_status_timeout(self, hours: int) -> None:
-        """Set the status timeout duration in hours."""
-        with self._lock:
-            self._status_timeout = timedelta(hours=hours)
-
-
-# Global instance of BookQueue
-book_queue = BookQueue()
-
-@dataclass
-class SearchFilters:
-    isbn: Optional[List[str]] = None
-    author: Optional[List[str]] = None
-    title: Optional[List[str]] = None
-    lang: Optional[List[str]] = None
-    sort: Optional[str] = None
-    content: Optional[List[str]] = None
-    format: Optional[List[str]] = None

network.py

@@ -1,350 +0,0 @@
-"""Network operations manager for the book downloader application."""
-
-import requests
-import urllib.request
-from typing import Sequence, Tuple, Any, Union, cast, List, Optional, Callable
-import socket
-import dns.resolver
-from socket import AddressFamily, SocketKind
-import urllib.parse
-import ssl
-import ipaddress
-
-from logger import setup_logger
-from config import PROXIES, AA_BASE_URL, CUSTOM_DNS, AA_AVAILABLE_URLS, DOH_SERVER
-import config
-
-logger = setup_logger(__name__)
-
-# Common helper functions for DNS resolution
-def _decode_host(host: Union[str, bytes, None]) -> str:
-    """Convert host to string, handling bytes and None cases."""
-    if host is None:
-        return ""
-    if isinstance(host, bytes):
-        return host.decode('utf-8')
-    return str(host)
-
-def _decode_port(port: Union[str, bytes, int, None]) -> int:
-    """Convert port to integer, handling various input types."""
-    if port is None:
-        return 0
-    if isinstance(port, (str, bytes)):
-        return int(port)
-    return int(port)
-
-def _is_local_address(host_str: str) -> bool:
-    """Check if an address is local and should bypass custom DNS."""
-    """Check if an address is local or private and should bypass custom DNS."""
-    # Localhost checks
-    if (host_str == 'localhost' or 
-        host_str.startswith('127.') or 
-        host_str == '::1' or 
-        host_str == '0.0.0.0'):
-        return True
-        
-    # IPv4 private ranges (RFC 1918)
-    if (host_str.startswith('10.') or 
-        (host_str.startswith('172.') and 
-         len(host_str.split('.')) > 1 and 
-         16 <= int(host_str.split('.')[1]) <= 31) or
-        host_str.startswith('192.168.')):
-        return True
-        
-    # IPv6 private ranges
-    if (host_str.startswith('fc') or 
-        host_str.startswith('fd') or  # Unique local addresses (fc00::/7)
-        host_str.startswith('fe80:')):  # Link-local addresses (fe80::/10)
-        return True
-    
-    return False
-
-def _is_ip_address(host_str: str) -> bool:
-    """Check if a string is a valid IP address (IPv4 or IPv6)."""
-    try:
-        ipaddress.ip_address(host_str)
-        return True
-    except ValueError:
-        return False
-
-# Store the original getaddrinfo function
-original_getaddrinfo = socket.getaddrinfo
-
-class DoHResolver:
-    """DNS over HTTPS resolver implementation."""
-    def __init__(self, provider_url: str, hostname: str, ip: str):
-        """Initialize DoH resolver with specified provider."""
-        self.base_url = provider_url.lower().strip()
-        self.hostname = hostname  # Store the hostname for hostname-based skipping
-        self.ip = ip              # Store IP for direct connections
-        self.session = requests.Session()
-        
-        # Different headers based on provider
-        if 'google' in self.base_url:
-            self.session.headers.update({
-                'Accept': 'application/json',
-            })
-        else:
-            self.session.headers.update({
-                'Accept': 'application/dns-json',
-            })
-    
-    def resolve(self, hostname: str, record_type: str) -> List[str]:
-        """Resolve a hostname using DoH.
-        
-        Args:
-            hostname: The hostname to resolve
-            record_type: The DNS record type (A or AAAA)
-            
-        Returns:
-            List of resolved IP addresses
-        """
-        # Check if hostname is already an IP address, no need to resolve
-        if _is_ip_address(hostname):
-            logger.debug(f"Skipping DoH resolution for IP address: {hostname}")
-            return [hostname]
-            
-        # Check if hostname is a private IP address, and skip DoH if it is
-        if _is_local_address(hostname):
-            logger.debug(f"Skipping DoH resolution for private IP: {hostname}")
-            return [hostname]
-            
-        # Skip resolution for the DoH server itself to prevent recursion
-        if hostname == self.hostname:
-            logger.debug(f"Skipping DoH resolution for DoH server itself: {hostname}")
-            return [self.ip]
-            
-        try:
-            params = {
-                'name': hostname,
-                'type': 'AAAA' if record_type == 'AAAA' else 'A'
-            }
-            
-            response = self.session.get(
-                self.base_url,
-                params=params,
-                proxies=PROXIES,
-                timeout=5
-            )
-            response.raise_for_status()
-            
-            data = response.json()
-            if 'Answer' not in data:
-                logger.warning(f"DoH resolution failed for {hostname}: {data}")
-                return []
-            
-            # Extract IP addresses from the response    
-            answers = [answer['data'] for answer in data['Answer'] 
-                    if answer.get('type') == (28 if record_type == 'AAAA' else 1)]
-            logger.debug(f"Resolved {hostname} to {len(answers)} addresses using DoH: {answers}")
-            return answers
-            
-        except Exception as e:
-            logger.warning(f"DoH resolution failed for {hostname}: {e}")
-            return []
-
-def create_custom_resolver():
-    """Create a custom DNS resolver using the configured DNS servers."""
-    custom_resolver = dns.resolver.Resolver()
-    custom_resolver.nameservers = CUSTOM_DNS
-    return custom_resolver
-
-def resolve_with_custom_dns(resolver, hostname: str, record_type: str) -> List[str]:
-    """Resolve hostname using custom DNS resolver.
-    
-    Args:
-        resolver: The DNS resolver to use
-        hostname: The hostname to resolve
-        record_type: The DNS record type (A or AAAA)
-        
-    Returns:
-        List of resolved IP addresses
-    """
-    try:
-        answers = resolver.resolve(hostname, record_type)
-        return [str(answer) for answer in answers]
-    except Exception as e:
-        logger.debug(f"{record_type} resolution failed for {hostname}: {e}")
-        return []
-
-def create_custom_getaddrinfo(
-    resolve_ipv4: Callable[[str], List[str]],
-    resolve_ipv6: Callable[[str], List[str]],
-    skip_check: Optional[Callable[[str], bool]] = None
-):
-    """Create a custom getaddrinfo function that uses the provided resolvers.
-    
-    Args:
-        resolve_ipv4: Function to resolve IPv4 addresses
-        resolve_ipv6: Function to resolve IPv6 addresses
-        skip_check: Optional function to check if custom resolution should be skipped
-        
-    Returns:
-        A custom getaddrinfo function
-    """
-    def custom_getaddrinfo(
-        host: Union[str, bytes, None],
-        port: Union[str, bytes, int, None],
-        family: int = 0,
-        type: int = 0,
-        proto: int = 0,
-        flags: int = 0
-    ) -> Sequence[Tuple[AddressFamily, SocketKind, int, str, Tuple[Any, ...]]]:
-        host_str = _decode_host(host)
-        port_int = _decode_port(port)
-        
-        # Skip custom resolution for IP addresses, local addresses, or if skip check passes
-        if _is_ip_address(host_str) or _is_local_address(host_str) or (skip_check and skip_check(host_str)):
-            logger.debug(f"Using system DNS for IP address or local/private address: {host_str}")
-            return original_getaddrinfo(host, port, family, type, proto, flags)
-        
-        results: list[Tuple[AddressFamily, SocketKind, int, str, Tuple[Any, ...]]] = []
-        
-        try:
-            # Try IPv6 first if family allows it
-            if family == 0 or family == socket.AF_INET6:
-                logger.debug(f"Resolving IPv6 address for {host_str}")
-                ipv6_answers = resolve_ipv6(host_str)
-                for answer in ipv6_answers:
-                    results.append((socket.AF_INET6, cast(SocketKind, type), proto, '', (answer, port_int, 0, 0)))
-                if ipv6_answers:
-                    logger.debug(f"Found {len(ipv6_answers)} IPv6 addresses for {host_str}")
-            
-            # Then try IPv4
-            if family == 0 or family == socket.AF_INET:
-                logger.debug(f"Resolving IPv4 address for {host_str}")
-                ipv4_answers = resolve_ipv4(host_str)
-                for answer in ipv4_answers:
-                    results.append((socket.AF_INET, cast(SocketKind, type), proto, '', (answer, port_int)))
-                if ipv4_answers:
-                    logger.debug(f"Found {len(ipv4_answers)} IPv4 addresses for {host_str}")
-            
-            if results:
-                logger.debug(f"Resolved {host_str} to {len(results)} addresses")
-                return results
-                
-        except Exception as e:
-            logger.warning(f"Custom DNS resolution failed for {host_str}: {e}, falling back to system DNS")
-        
-        # Fall back to system DNS if custom resolution fails
-        try:
-            return original_getaddrinfo(host, port, family, type, proto, flags)
-        except Exception as e:
-            logger.error(f"System DNS resolution also failed for {host_str}: {e}")
-            # Last resort: Try to connect to the hostname directly
-            if family == 0 or family == socket.AF_INET:
-                logger.warning(f"Using direct hostname as last resort for {host_str}")
-                return [(socket.AF_INET, cast(SocketKind, type), proto, '', (host_str, port_int))]
-            else:
-                raise  # Re-raise the exception if we can't provide a last resort
-    
-    return custom_getaddrinfo
-
-def init_doh_resolver(doh_server: str = DOH_SERVER):
-    """Initialize DNS over HTTPS resolver.
-    
-    Args:
-        doh_server: The DoH server URL
-    """
-    # Pre-resolve the DoH server hostname to prevent recursion
-    url = urllib.parse.urlparse(doh_server)
-    server_hostname = url.hostname if url.hostname else ''
-    
-    # Use system DNS for DoH server to prevent circular dependencies
-    try:
-        # Temporarily restore original getaddrinfo to resolve DoH server
-        temp_getaddrinfo = socket.getaddrinfo
-        socket.getaddrinfo = original_getaddrinfo
-        
-        server_ip = socket.gethostbyname(server_hostname)
-        logger.info(f"DoH server {server_hostname} resolved to IP: {server_ip}")
-        
-        # Restore custom getaddrinfo if it was previously set
-        socket.getaddrinfo = temp_getaddrinfo
-    except Exception as e:
-        logger.error(f"Failed to resolve DoH server {server_hostname}: {e}")
-        # Fall back to a known public DNS if resolution fails
-        server_ip = "1.1.1.1"
-        logger.info(f"Using fallback IP for DoH server: {server_ip}")
-    
-    # Create DoH resolver
-    doh_resolver = DoHResolver(doh_server, server_hostname, server_ip)
-    
-    # Create resolver functions
-    def resolve_ipv4(hostname: str) -> List[str]:
-        return doh_resolver.resolve(hostname, 'A')
-    
-    def resolve_ipv6(hostname: str) -> List[str]:
-        return doh_resolver.resolve(hostname, 'AAAA')
-    
-    # Skip DoH resolution for the DoH server itself, IP addresses, and private addresses
-    def skip_doh(hostname: str) -> bool:
-        return (hostname == server_hostname or 
-                hostname == server_ip or 
-                _is_ip_address(hostname) or 
-                _is_local_address(hostname))
-    
-    # Replace socket.getaddrinfo with our DoH-enabled version
-    socket.getaddrinfo = cast(Any, create_custom_getaddrinfo(
-        resolve_ipv4, resolve_ipv6, skip_doh
-    ))
-    
-    logger.info("DoH resolver successfully configured and activated")
-    return doh_resolver
-
-def init_custom_resolver():
-    """Initialize custom DNS resolver using configured DNS servers."""
-    custom_resolver = create_custom_resolver()
-    
-    # Create resolver functions
-    def resolve_ipv4(hostname: str) -> List[str]:
-        return resolve_with_custom_dns(custom_resolver, hostname, 'A')
-    
-    def resolve_ipv6(hostname: str) -> List[str]:
-        return resolve_with_custom_dns(custom_resolver, hostname, 'AAAA')
-    
-    # Replace socket.getaddrinfo with our custom resolver
-    socket.getaddrinfo = cast(Any, create_custom_getaddrinfo(resolve_ipv4, resolve_ipv6))
-    
-    logger.info("Custom DNS resolver successfully configured and activated")
-    return custom_resolver
-
-# Initialize DNS resolvers based on configuration
-def init_dns_resolvers():
-    """Initialize DNS resolvers based on configuration."""
-    if len(CUSTOM_DNS) > 0:
-        init_custom_resolver()
-        if DOH_SERVER:
-            init_doh_resolver()
-
-# Initialize DNS resolvers
-init_dns_resolvers()
-
-# Check available AA_BASE_URLs if set to auto
-if AA_BASE_URL == "auto":
-    logger.info(f"AA_BASE_URL: auto, checking available urls {AA_AVAILABLE_URLS}")
-    for url in AA_AVAILABLE_URLS:
-        try:
-            response = requests.get(url, proxies=PROXIES)
-            if response.status_code == 200:
-                AA_BASE_URL = url
-                break
-        except Exception as e:
-            logger.error_trace(f"Error checking {url}: {e}")
-    if AA_BASE_URL == "auto":
-        AA_BASE_URL = AA_AVAILABLE_URLS[0]
-config.AA_BASE_URL = AA_BASE_URL
-logger.info(f"AA_BASE_URL: {AA_BASE_URL}")
-
-# Configure urllib opener with appropriate headers
-opener = urllib.request.build_opener()
-opener.addheaders = [
-    ('User-agent', 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) '
-        'AppleWebKit/537.36 (KHTML, like Gecko) '
-        'Chrome/129.0.0.0 Safari/537.3')
-]
-urllib.request.install_opener(opener)
-
-# Need an empty function to be called by downloader.py
-def init():
-    pass

package-lock.json

@@ -0,0 +1,22 @@
+{
+  "name": "shelfmark",
+  "lockfileVersion": 3,
+  "requires": true,
+  "packages": {
+    "": {
+      "devDependencies": {
+        "baseline-browser-mapping": "^2.9.19"
+      }
+    },
+    "node_modules/baseline-browser-mapping": {
+      "version": "2.9.19",
+      "resolved": "https://registry.npmjs.org/baseline-browser-mapping/-/baseline-browser-mapping-2.9.19.tgz",
+      "integrity": "sha512-ipDqC8FrAl/76p2SSWKSI+H9tFwm7vYqXQrItCuiVPt26Km0jS+NzSsBWAaBusvSbQcfJG+JitdMm+wZAgTYqg==",
+      "dev": true,
+      "license": "Apache-2.0",
+      "bin": {
+        "baseline-browser-mapping": "dist/cli.js"
+      }
+    }
+  }
+}

package.json

@@ -0,0 +1,5 @@
+{
+  "devDependencies": {
+    "baseline-browser-mapping": "^2.9.19"
+  }
+}

pyproject.toml

@@ -0,0 +1,172 @@
+[project]
+name = "shelfmark"
+version = "0.1.0"
+description = "Shelfmark - Book Downloader"
+requires-python = ">=3.14"
+dependencies = [
+    "flask",
+    "flask-cors",
+    "flask-socketio",
+    "python-socketio",
+    "requests[socks]",
+    "defusedxml",
+    "beautifulsoup4",
+    "tqdm",
+    "dnspython",
+    "gunicorn",
+    "gevent",
+    "gevent-websocket",
+    "psutil",
+    "emoji",
+    "rarfile",
+    "qbittorrent-api>=2026.8.0",
+    "transmission-rpc",
+    "authlib>=1.7.2,<1.8",
+    "apprise>=1.12.0",
+]
+
+[project.optional-dependencies]
+browser = [
+    "pyvirtualdisplay",
+    "pyautogui",
+    "seleniumbase==4.51.11",
+    "python-xlib",
+]
+
+[dependency-groups]
+dev = [
+    "basedpyright>=1.39.9",
+    "prek",
+    "pytest",
+    "pytest-cov",
+    "pytest-xdist>=3.8.0",
+    "ruff==0.16.2",
+    "vulture>=2.14",
+]
+
+[tool.pytest.ini_options]
+testpaths = ["tests"]
+python_files = ["test_*.py", "*_test.py"]
+python_classes = ["Test*"]
+python_functions = ["test_*"]
+addopts = [
+    "-v",
+    "--tb=short",
+    "-n",
+    "auto",
+]
+markers = [
+    "integration: marks tests that require running services (deselect with '-m \"not integration\"')",
+    "slow: marks tests as slow (deselect with '-m \"not slow\"')",
+    "e2e: marks end-to-end tests that require the full application stack",
+]
+
+[tool.ruff]
+line-length = 100
+extend-exclude = [".local"]
+
+[tool.ruff.lint]
+select = [
+    "F", "I", "UP", "B", "C4", "SIM", "PTH", "RET", "PIE", "FURB", "PERF", "TRY",
+    "A", "DTZ", "N",
+    "BLE001",
+    "ANN001", "ANN002", "ANN003", "ANN201", "ANN202", "ANN204",
+    "E402",
+    "ERA001",
+    "E731",
+    "S101",
+    "S110",
+    "S105", "S108",
+    "S311", "S324",
+    "S607", "S608",
+    "G003", "G004",
+    "PGH003",
+    "PLC0414",
+    "PLR1714",
+    "PLW1510",
+    "PLW2901",
+    "PLW0108",
+    "PT028",
+    "PYI034",
+    "Q000",
+    "RUF005", "RUF012", "RUF013", "RUF059", "RUF100",
+    "TC001", "TC002", "TC003",
+]
+ignore = ["D", "EM", "FBT", "PLR2004", "UP035", "TRY003", "E501", "TD002", "S104", "S603"]
+
+[tool.ruff.lint.per-file-ignores]
+"scripts/**/*.py" = [
+    "BLE001",
+    "S",
+    "TRY",
+]
+"tests/**/*.py" = [
+    "ANN",
+    "BLE001",
+    "B010",
+    "B017",
+    "B028",
+    "DTZ",
+    "E402",
+    "E731",
+    "ERA001",
+    "FURB",
+    "G003",
+    "G004",
+    "PERF",
+    "PIE",
+    "PLC0414",
+    "PLW0108",
+    "PLW1510",
+    "PLW2901",
+    "PTH",
+    "PT028",
+    "PYI034",
+    "Q000",
+    "RET",
+    "RUF012",
+    "S",
+    "SIM",
+    "TC001",
+    "TC002",
+    "TC003",
+    "TRY",
+    "UP028",
+]
+
+[tool.basedpyright]
+include = ["shelfmark"]
+exclude = [".local", "tests", "**/__pycache__", "**/node_modules"]
+pythonVersion = "3.14"
+typeCheckingMode = "standard"
+
+[tool.vulture]
+paths = ["shelfmark"]
+exclude = [".local", "tests"]
+ignore_decorators = [
+    "@app.route",
+    "@app.before_request",
+    "@app.after_request",
+    "@app.errorhandler",
+    "@socketio.on",
+    "@register_provider",
+    "@register_provider_kwargs",
+    "@register_settings",
+    "@register_source",
+    "@register_handler",
+    "@register_client",
+    "@register_output",
+]
+min_confidence = 90
+sort_by_size = true
+
+[tool.coverage.run]
+source = ["shelfmark"]
+branch = true
+
+[tool.coverage.report]
+show_missing = true
+skip_empty = true
+
+[tool.uv]
+package = false

readme.md

@@ -1,301 +1,308 @@
-# 📚 Calibre-Web-Automated-Book-Downloader
+# 📚 Shelfmark: Book Search & Request Tool
 
-![Calibre-Web Automated Book Downloader](static/media/logo.png 'Calibre-Web Automated Book Downloader')
+<img src="src/frontend/public/logo.png" alt="Shelfmark" width="200">
 
-An intuitive web interface for searching and requesting book downloads, designed to work seamlessly with [Calibre-Web-Automated](https://github.com/crocodilestick/Calibre-Web-Automated). This project streamlines the process of downloading books and preparing them for integration into your Calibre library.
+> [!NOTE]
+> This project is in a stable state as of May 2026 but is not under active maintenance. 
+
+Shelfmark is a self-hosted web interface for searching and requesting books and audiobooks across multiple sources. Bring your own sources, metadata providers, and download clients to build a single hub for your digital library. Supports multiple users with a built-in request system, so you can share your instance with others and let them browse and request books on their own.
+
+Works great alongside the following library tools, with support for automatic imports:
+- [Calibre](https://calibre-ebook.com/)
+- [Calibre-Web](https://github.com/janeczku/calibre-web)
+- [Calibre-Web-Automated](https://github.com/crocodilestick/Calibre-Web-Automated)
+- [Grimmory](https://github.com/grimmory-tools/grimmory)
+- [Audiobookshelf](https://github.com/advplyr/audiobookshelf)
 
 ## ✨ Features
 
-- 🌐 User-friendly web interface for book search and download
-- 🔄 Automated download to your specified ingest folder
-- 🔌 Seamless integration with Calibre-Web-Automated
-- 📖 Support for multiple book formats (epub, mobi, azw3, fb2, djvu, cbz, cbr)
-- 🛡️ Cloudflare bypass capability for reliable downloads
-- 🐳 Docker-based deployment for quick setup
+- **One-Stop Interface** - A clean, modern UI to search, browse, and download from multiple configured sources in one place
+- **Multiple Sources** - Configurable web, torrent, usenet, and IRC source support
+- **Audiobook Support** - Full audiobook search and download with dedicated processing
+- **Flexible Search** - Search metadata providers (Hardcover, Open Library, Google Books) for rich book and audiobook discovery, or query configured sources directly
+- **Multi-User & Requests** - Share your instance with others, let users browse and request books, and manage approvals with configurable notifications
+- **Authentication** - Built-in login, OIDC single sign-on, proxy auth, and Calibre-Web database support
+- **Real-Time Progress** - Unified download queue with live status updates across all sources
+- **Network Flexibility** - Configurable proxy support, DNS settings, and optional Cloudflare handling for protected sources
 
 ## 🖼️ Screenshots
 
-![Main search interface Screenshot](README_images/search.png 'Main search interface')
+**Home screen**
+![Home screen](README_images/homescreen.png 'Home screen')
 
-![Details modal Screenshot placeholder](README_images/details.png 'Details modal')
+**Search results**
+![Search results](README_images/search-results.png 'Search results')
 
-![Download queue Screenshot placeholder](README_images/downloading.png 'Download queue')
+**Multi-source downloads**
+![Multi-source downloads](README_images/multi-source.png 'Multi-source downloads')
+
+**Download queue**
+![Download queue](README_images/downloads.png 'Download queue')
 
 ## 🚀 Quick Start
 
 ### Prerequisites
 
-- Docker
-- Docker Compose
-- A running instance of [Calibre-Web-Automated](https://github.com/crocodilestick/Calibre-Web-Automated) (recommended)
+- Docker & Docker Compose
+- At least 2 GB of RAM available to the container when using the standard image — see [Memory Requirements](#memory-requirements)
 
-### Installation Steps
-
-1. Get the docker-compose.yml:
+### Installation
 
+1. Download the [docker-compose file](compose/docker-compose.yml):
    ```bash
-   curl -O https://raw.githubusercontent.com/calibrain/calibre-web-automated-book-downloader/refs/heads/main/docker-compose.yml
+   curl -O https://raw.githubusercontent.com/calibrain/shelfmark/main/compose/docker-compose.yml
    ```
 
 2. Start the service:
-
    ```bash
    docker compose up -d
    ```
 
-3. Access the web interface at `http://localhost:8084`
+3. Open `http://localhost:8084`
 
-## ⚙️ Configuration
+Open the web interface, then configure the sources and settings you want to use.
 
-### Environment Variables
-
-#### Application Settings
-
-| Variable          | Description             | Default Value      |
-| ----------------- | ----------------------- | ------------------ |
-| `FLASK_PORT`      | Web interface port      | `8084`             |
-| `FLASK_HOST`      | Web interface binding   | `0.0.0.0`          |
-| `DEBUG`           | Debug mode toggle       | `false`            |
-| `INGEST_DIR`      | Book download directory | `/cwa-book-ingest` |
-| `TZ`              | Container timezone      | `UTC`              |
-| `UID`             | Runtime user ID         | `1000`             |
-| `GID`             | Runtime group ID        | `100`              |
-| `CWA_DB_PATH`     | Calibre-Web's database  | None               |
-| `ENABLE_LOGGING`  | Enable log file         | `true`             |
-| `LOG_LEVEL`       | Log level to use        | `info`             |
-
-If you wish to enable authentication, you must set `CWA_DB_PATH` to point to Calibre-Web's `app.db`, in order to match the username and password.
-
-If logging is enabld, log folder default location is `/var/log/cwa-book-downloader`
-Available log levels: `DEBUG`, `INFO`, `WARNING`, `ERROR`, `CRITICAL`. Higher levels show fewer messages.
-
-Note that if using TOR, the TZ will be calculated automatically based on IP.
-
-#### Download Settings
-
-| Variable               | Description                                               | Default Value                     |
-| ---------------------- | --------------------------------------------------------- | --------------------------------- |
-| `MAX_RETRY`            | Maximum retry attempts                                    | `3`                               |
-| `DEFAULT_SLEEP`        | Retry delay (seconds)                                     | `5`                               |
-| `MAIN_LOOP_SLEEP_TIME` | Processing loop delay (seconds)                           | `5`                               |
-| `SUPPORTED_FORMATS`    | Supported book formats                                    | `epub,mobi,azw3,fb2,djvu,cbz,cbr` |
-| `BOOK_LANGUAGE`        | Preferred language for books                              | `en`                              |
-| `AA_DONATOR_KEY`       | Optional Donator key for Anna's Archive fast download API | ``                                |
-| `USE_BOOK_TITLE`       | Use book title as filename instead of ID                  | `false`                           |
-| `PRIORITIZE_WELIB`     | When downloading, download from WELIB first instead of AA | `false`                           |
-| `ALLOW_USE_WELIB`       | Allow usage of welib for downloading books if found there | `true`                            |
-
-If you change `BOOK_LANGUAGE`, you can add multiple comma separated languages, such as `en,fr,ru` etc.  
-
-#### AA 
-
-| Variable               | Description                                               | Default Value                     |
-| ---------------------- | --------------------------------------------------------- | --------------------------------- |
-| `AA_BASE_URL`          | Base URL of Annas-Archive (could be changed for a proxy)  | `https://annas-archive.org`       |
-| `USE_CF_BYPASS`        | Disable CF bypass and use alternative links instead       | `true`                            |
-
-If you are a donator on AA, you can use your Key in `AA_DONATOR_KEY` to speed up downloads and bypass the wait times.
-If disabling the cloudflare bypass, you will be using alternative download hosts, such as libgen or z-lib, but they usually have a delay before getting the more recent books and their collection is not as big as aa's. But this setting should work for the majority of books.
-
-#### Network Settings
-
-| Variable               | Description                     | Default Value           |
-| ---------------------- | ------------------------------- | ----------------------- |
-| `AA_ADDITIONAL_URLS`   | Proxy URLs for AA (, separated) | ``                      |
-| `HTTP_PROXY`           | HTTP proxy URL                  | ``                      |
-| `HTTPS_PROXY`          | HTTPS proxy URL                 | ``                      |
-| `CUSTOM_DNS`           | Custom DNS IP                   | ``                      |
-| `USE_DOH`              | Use DNS over HTTPS              | `false`                 |
-
-For proxy configuration, you can specify URLs in the following format:
-```bash
-# Basic proxy
-HTTP_PROXY=http://proxy.example.com:8080
-HTTPS_PROXY=http://proxy.example.com:8080
-
-# Proxy with authentication
-HTTP_PROXY=http://username:password@proxy.example.com:8080
-HTTPS_PROXY=http://username:password@proxy.example.com:8080
-```
-
-
-The `CUSTOM_DNS` setting supports two formats:
-
-1. **Custom DNS Servers**: A comma-separated list of DNS server IP addresses
-   - Example: `127.0.0.53,127.0.1.53` (useful for PiHole)
-   - Supports both IPv4 and IPv6 addresses in the same string
-
-2. **Preset DNS Providers**: Use one of these predefined options:
-   - `google` - Google DNS
-   - `quad9` - Quad9 DNS
-   - `cloudflare` - Cloudflare DNS
-   - `opendns` - OpenDNS
-
-For users experiencing ISP-level website blocks (such as Virgin Media in the UK), using alternative DNS providers like Cloudflare may help bypass these restrictions
-
-If a `CUSTOM_DNS` is specified from the preset providers, you can also set a `USE_DOH=true` to force using DNS over HTTPS,
-which might also help in certain network situations. Note that only `google`, `quad9`, `cloudflare` and `opendns` are 
-supported for now, and any other value in `CUSTOM_DNS` will make the `USE_DOH` flag ignored.
-
-Try something like this :
-```bash
-CUSTOM_DNS=cloudflare
-USE_DOH=true
-```
-
-#### Custom configuration
-
-| Variable               | Description                                                 | Default Value           |
-| ---------------------- | ----------------------------------------------------------- | ----------------------- |
-| `CUSTOM_SCRIPT`        | Path to an executable script that tuns after each download  | ``                      |
-
-If `CUSTOM_SCRIPT` is set, it will be executed after each successful download but before the file is moved to the ingest directory. This allows for custom processing like format conversion or validation.
-
-The script is called with the full path of the downloaded file as its argument. Important notes:
-- The script must preserve the original filename for proper processing
-- The file can be modified or even deleted if needed
-- The file will be moved to `/cwa-book-ingest` after the script execution (if not deleted)
-
-You can specify these configuration in this format :
-```
-environment:
-  - CUSTOM_SCRIPT=/scripts/process-book.sh
-
-volumes:
-  - local/scripts/custom_script.sh:/scripts/process-book.sh
-```
-
-### Volume Configuration
+### Volume Setup
 
 ```yaml
 volumes:
-  - /your/local/path:/cwa-book-ingest
-  - /cwa/config/path/app.db:/auth/app.db:ro
-```
-**Note** - If your library volume is on a cifs share, you will get a "database locked" error until you add **nobrl** to your mount line in your fstab file. e.g. //192.168.1.1/Books /media/books cifs credentials=.smbcredentials,uid=1000,gid=1000,iocharset=utf8,**nobrl** - See https://github.com/crocodilestick/Calibre-Web-Automated/issues/64#issuecomment-2712769777
-
-Mount should align with your Calibre-Web-Automated ingest folder.
-
-## Variants:
-
-### 🧅 Tor Variant
-
-This application also offers a variant that routes all its traffic through the Tor network. This can be useful for enhanced privacy or bypassing network restrictions.
-
-To use the Tor variant:
-
-1.  Get the Tor-specific docker-compose file:
-    ```bash
-    curl -O https://raw.githubusercontent.com/calibrain/calibre-web-automated-book-downloader/refs/heads/main/docker-compose.tor.yml
-    ```
-2.  Start the service using this file:
-    ```bash
-    docker compose -f docker-compose.tor.yml up -d
-    ```
-
-**Important Considerations for Tor:**
-
-*   **Capabilities:** This variant requires the `NET_ADMIN` and `NET_RAW` Docker capabilities to configure `iptables` for transparent Tor proxying.
-*   **Timezone:** When running in Tor mode, the container will attempt to determine the timezone based on the Tor exit node's IP address and set it automatically. This will override the `TZ` environment variable if it is set.
-*   **Network Settings:** Custom DNS, DoH, and HTTP(S) proxy settings (`CUSTOM_DNS`, `USE_DOH`, `HTTP_PROXY`, `HTTPS_PROXY`) are ignored when using the Tor variant, as all traffic goes through Tor.
-
-### External Cloudflare resolver variant
-
-This variant allows the application to use an external service to bypass Cloudflare protection, instead of relying on the built-in bypasser. This is useful if you already have a dedicated Cloudflare resolver (such as [FlareSolverr](https://github.com/FlareSolverr/FlareSolverr) or compatible services like [ByParr](https://github.com/ThePhaseless/Byparr)) running elsewhere.
-
-#### How it works:
-
-- When enabled, all requests that require Cloudflare bypass are sent to your external resolver service.
-- The application communicates with the resolver using its API.
-- This approach can improve reliability and performance, especially if your external resolver is optimized or shared across multiple applications.
-
-#### Configuration
-
-| Variable               | Description                                                 | Default Value           |
-| ---------------------- | ----------------------------------------------------------- | ----------------------- |
-| `EXT_BYPASSER_URL`     | The full URL of your external resolver (required)           |                         |
-| `EXT_BYPASSER_PATH`    | API path for the resolver (usually `/v1`)                   | `/v1`                   |
-| `EXT_BYPASSER_TIMEOUT` | Timeout for page loading (in milliseconds)                  | `60000`                 |
-
-#### Important
-
-This feature follows the same configuration of the built-in Cloudflare bypasser, so you should turn on the `USE_CF_BYPASS` configuration to enable it.
-
-#### To use the External Cloudflare resolver variant:
-
-1.  Get the extbp-specific docker-compose file:
-    ```bash
-    curl -O https://raw.githubusercontent.com/calibrain/calibre-web-automated-book-downloader/refs/heads/main/docker-compose.extbp.yml
-    ```
-2.  Start the service using this file:
-    ```bash
-    docker compose -f docker-compose.extbp.yml up -d
-    ```
-
-#### Compatibility:
-This feature is designed to work with any resolver that implements the `FlareSolverr` API schema, including `ByParr` and similar projects.
-
-#### Benefits:
-
-- Centralizes Cloudflare bypass logic for easier maintenance.
-- Can leverage more powerful or distributed resolver infrastructure.
-- Reduces load on the main application container.
-
-## 🏗️ Architecture
-
-The application consists of a single service:
-
-1. **calibre-web-automated-bookdownloader**: Main application providing web interface and download functionality
-
-## 🏥 Health Monitoring
-
-Built-in health checks monitor:
-
-- Web interface availability
-- Download service status
-- Cloudflare bypass service connection
-
-Checks run every 30 seconds with a 30-second timeout and 3 retries.
-You can enable by adding this to your compose :
-```
-HEALTHCHECK --interval=30s --timeout=30s --start-period=5s --retries=3 \
-    CMD pyrequests http://localhost:8084/request/api/status || exit 1
+  - /your/config/path:/config # Config, database, and artwork cache directory
+  - /your/download/path:/books # Downloaded books
+  - /client/path:/client/path # Optional: For Torrent/Usenet downloads, match your client directory exactly.
 ```
 
-## 📝 Logging
+> **Tip**: Point the download volume to your CWA or Grimmory ingest folder for automatic import.
 
-Logs are available in:
+> **Note**: CIFS shares require `nobrl` mount option to avoid database lock errors.
 
-- Container: `/var/logs/cwa-book-downloader.log`
-- Docker logs: Access via `docker logs`
+### Non-root container mode
 
-## 🤝 Contributing
+- Start the container as `1000:1000` with Docker `user: "1000:1000"` or `docker run --user 1000:1000`.
+- For Kubernetes, set `runAsUser: 1000`, `runAsGroup: 1000`, and `runAsNonRoot: true` together.
+- `PUID`/`PGID` keep the default root startup flow.
+- Mounted paths must already be writable by `1000:1000`.
+- `USING_TOR=true` requires root startup.
 
-Contributions are welcome! Feel free to submit a Pull Request.
+## ⚙️ Configuration
 
-## 📄 License
+### Search Modes
 
-This project is licensed under the MIT License - see the [LICENSE](LICENSE) file for details.
+**Direct**
+- Queries configured sources directly
 
-## ⚠️ Important Disclaimers
+**Universal** (recommended)
+- Search via metadata providers (Hardcover, Open Library, Google Books) for richer results
+- Aggregates releases from multiple configured sources
+- Full audiobook support
 
-### Copyright Notice
+### Environment Variables
 
-While this tool can access various sources including those that might contain copyrighted material (e.g., Anna's Archive), it is designed for legitimate use only. Users are responsible for:
+Environment variables work for initial setup and Docker deployments. They serve as defaults that can be overridden in the web interface.
 
-- Ensuring they have the right to download requested materials
-- Respecting copyright laws and intellectual property rights
-- Using the tool in compliance with their local regulations
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `FLASK_PORT` | Web interface port | `8084` |
+| `INGEST_DIR` | Book download directory | `/books` |
+| `TZ` | Container timezone | `UTC` |
+| `PUID` / `PGID` | Runtime user/group for the default root-startup flow (also supports legacy `UID`/`GID`) | `1000` / `1000` |
+| `SEARCH_MODE` | `direct` or `universal` | `universal` |
+| `USING_TOR` | Enable Tor routing (requires root startup) | `false` |
+| `USING_WIREGUARD` | Enable WireGuard VPN egress with kill-switch (requires root startup) | `false` |
+| `WIREGUARD_CONFIG` | Path to the mounted wg-quick config | `/config/wg0.conf` |
+| `WIREGUARD_INTERFACE` | WireGuard interface name | `wg0` |
+| `LAN_NETWORK` | Comma-separated CIDRs kept off the tunnel so the WebUI / internal clients stay reachable | `127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16` |
+| `WIREGUARD_ENFORCE_DNS` | Pin the resolver (via `WIREGUARD_DNS`, else the config's `DNS =`) so DNS can't silently fall back to an off-tunnel path. Designed for a trusted LAN resolver kept reachable via `LAN_NETWORK` (query leaves over the LAN; download still egresses via the tunnel) — it does **not** force queries through the tunnel. Docker's embedded resolver (`127.0.0.11`) is preserved when present so container-name resolution keeps working; pin its upstream via the container's `dns:` list. Fails closed if no resolver is available or `/etc/resolv.conf` is not writable. | `true` |
+| `WIREGUARD_DNS` | Explicit resolver(s) to pin (comma/space separated). Use when the VPN's pushed DNS filters domains you need; point at a resolver reachable via the tunnel or an allowed LAN resolver. | _(unset; uses config `DNS =`)_ |
+| `WIREGUARD_DISABLE_IPV6` | Strip IPv6 from the tunnel config (many container kernels lack the ip6tables `raw` table wg-quick needs) and remove IPv6 as a leak surface. | `true` |
+| `WIREGUARD_ALLOW_IPV6_LEAK` | Escape hatch: continue even when an IPv6 kill-switch can't be installed AND IPv6 can't be disabled. Only set if the container has no IPv6 connectivity. | `false` |
+| `WIREGUARD_ALLOW_WEBUI_OFFTUNNEL` | Opt-in off-tunnel WebUI reachability. Default (`false`) keeps the kill-switch strictly fail-closed: the only off-tunnel egress is loopback, the tunnel device and the LAN allowlist. Set `true` only if a **non-LAN** client (e.g. a public reverse proxy on another segment) must reach the WebUI; it permits app-server **replies** (`--sport FLASK_PORT`, conntrack REPLY) off-tunnel — server replies only, never client-initiated egress. LAN clients never need it (covered by `LAN_NETWORK`). | `false` |
+| `WIREGUARD_STALE_AFTER` | Seconds since the last handshake before the healthcheck bounces the tunnel. | `180` |
 
-### Duplicate Downloads Warning
+See the full [Environment Variables Reference](docs/environment-variables.md) for all available options.
 
-Please note that the current version:
+Some of the additional options available in Settings:
+- **Prowlarr** - Configure indexers and download clients to download books and audiobooks
+- **Additional audiobook sources** - Configure additional sources for audiobook discovery
+- **IRC** - Add details for IRC book sources and download directly from the UI
+- **Library Link** - Add a link to your Calibre-Web or Grimmory instance in the UI header
+- **File processing** - Customiseable download paths, file renaming and directory creation with template-based renaming
+- **Network Settings** - Custom proxy support (SOCKS5 + HTTP/S) and configurable DNS
+- **Format & Language** - Filter downloads by preferred formats, languages and sorting order
+- **Metadata Providers** - Configure API keys for Hardcover, Open Library, etc.
 
-- Does not check for existing files in the download directory
-- Does not verify if books already exist in your Calibre database
-- Exercise caution when requesting multiple books to avoid duplicates
+## 🐳 Docker Variants
 
-## 💬 Support
+### Standard
+```bash
+docker compose up -d
+```
 
-For issues or questions, please file an issue on the GitHub repository.
+The full-featured image with all network capabilities included.
 
+#### Memory Requirements
+
+The standard image ships a real Chromium browser, which it launches to solve Cloudflare challenges for Direct Download. Chromium needs room to run:
+
+- **2 GB of RAM available to the container** is a safe minimum; 1 GB or less is where problems usually start
+- Only relevant if you use Direct Download. Prowlarr, IRC and audiobook sources don't start the browser
+
+When the container is starved of memory, Chromium fails to start and every Direct Download fails with unrelated-looking errors — repeated `403 detected; switching to bypasser` followed by `No download URL found`, and downloads that never complete. If you're seeing that, check the container's memory limit and the host's free memory before suspecting your ISP or DNS.
+
+If you can't spare the memory, use the [Lite](#lite) image with an external resolver (e.g. FlareSolverr) running elsewhere.
+
+#### Tor Routing
+Optional Tor support for network privacy:
+```bash
+curl -O https://raw.githubusercontent.com/calibrain/shelfmark/main/compose/docker-compose.tor.yml
+docker compose -f docker-compose.tor.yml up -d
+```
+
+**Notes:**
+- Requires root startup
+- Requires `NET_ADMIN` and `NET_RAW` capabilities
+- Timezone is auto-detected from Tor exit node
+- Custom DNS/proxy settings are ignored when Tor is active
+
+#### WireGuard VPN Routing
+Optional WireGuard support to route all external egress through a VPN tunnel with a fail-closed kill-switch:
+```bash
+curl -O https://raw.githubusercontent.com/calibrain/shelfmark/main/compose/docker-compose.wireguard.yml
+# place your wg-quick config where the compose mounts /config, as wg0.conf
+docker compose -f docker-compose.wireguard.yml up -d
+```
+
+**Notes:**
+- Requires root startup
+- Requires `NET_ADMIN` and `NET_RAW` capabilities
+- Mount a standard wg-quick config at `WIREGUARD_CONFIG` (default `/config/wg0.conf`)
+- All non-LAN egress is forced through the tunnel; if the tunnel drops, external traffic **fails closed** while LAN ranges (WebUI, Prowlarr, qBittorrent) stay reachable
+- IPv4 and IPv6 both fail closed. On kernels without a usable `ip6tables`, disable IPv6 for the container (`sysctls: net.ipv6.conf.all.disable_ipv6=1`, as in the compose example) or the container refuses to start rather than risk an IPv6 leak
+- A supervised healthcheck bounces the tunnel if the handshake goes stale, and refreshes the endpoint allow rules so a roaming/rotated peer endpoint can reconnect
+- Mutually exclusive with `USING_TOR`
+- **DNS trust:** `WIREGUARD_DNS` must be a resolver you trust on a trusted network segment. When it is a LAN resolver (kept reachable off-tunnel by `LAN_NETWORK`), the query to that resolver leaves as plaintext UDP/53 on the LAN — the resolver is responsible for encrypting upstream. Two resolver paths exist: (1) when Docker's embedded resolver (`127.0.0.11`) is present it is **preserved** so container names (Prowlarr, qBittorrent) resolve — you MUST pin its upstream to a trusted resolver via the container's compose `dns:` list, since `WIREGUARD_DNS` cannot repoint the embedded resolver from inside the container; (2) otherwise `WIREGUARD_DNS`/the config `DNS =` line is written to `/etc/resolv.conf`. Setting `WIREGUARD_ENFORCE_DNS=false` is a **foot-gun**: with no embedded resolver present the container then uses its inherited resolver, which forwards to the Docker daemon's upstream **off-tunnel**, leaking your DNS. Leave enforcement on unless you have pinned the resolver another way.
+
+### Lite
+A lighter image without the built-in browser automation. Ideal for:
+
+- **External services** - Already running FlareSolverr or similar for other applications
+- **Alternative sources** - Using Prowlarr, IRC, or other configured sources
+- **Audiobooks** - Using Shelfmark primarily for audiobooks
+- **Constrained hosts** - No bundled browser, so it runs comfortably below the standard image's [memory requirements](#memory-requirements)
+
+```bash
+curl -O https://raw.githubusercontent.com/calibrain/shelfmark/main/compose/docker-compose.lite.yml
+docker compose -f docker-compose.lite.yml up -d
+```
+
+If you need browser-based access with the Lite image, configure an external resolver in Settings.
+
+## 🔐 Authentication
+
+Authentication is optional but recommended for shared or exposed instances. Multiple authentication methods are available in Settings:
+
+**1. Single Username/Password**
+
+**2. Proxy (Forward) Authentication**
+
+Proxy auth trusts headers set by your reverse proxy (e.g. `X-Auth-User`). Ensure Shelfmark is not directly exposed, and configure your proxy to strip/overwrite these headers for all inbound requests.
+
+**3. OIDC (OpenID Connect)**
+
+Integrate with your identity provider (Authelia, Authentik, Keycloak, etc.) for single sign-on. Supports PKCE flow, auto-discovery, group-based admin mapping, and auto-provisioning of new users.
+
+**4. Calibre-Web Database**
+
+If you're running Calibre-Web, you can reuse its user database by mounting it:
+
+```yaml
+volumes:
+  - /path/to/calibre-web/app.db:/auth/app.db:ro
+```
+
+### Multi-User Support
+
+With any authentication method enabled, Shelfmark supports multi-user management with admin/user roles. Users can have per-user settings for download destinations, email recipients, and notification preferences. Non-admin users only see their own downloads and can submit book requests for admin review. Admins can configure request policies per source to control whether users can download directly, must submit a request, or are blocked entirely.
+
+## Project Scope
+
+Shelfmark is a manual search and download tool, the entry point to your book library, not a library manager. It finds books, downloads them, and sends them to a configured destination. That's the full scope.
+
+Shelfmark intentionally does not:
+
+- **Track or manage your library** - it doesn't know or care what you already own
+- **Integrate with library software** - what happens after delivery is up to your library tool
+- **Monitor authors, series, or new releases** - there is no background automation
+- **Queue future downloads** - if a book isn't available now, Shelfmark won't watch for it
+
+These are non-goals, not missing features.
+
+## Contributing
+
+Shelfmark's core feature set is complete. Development focuses on stability, bug fixes, quality-of-life improvements, and refining the search experience. Contributions in these areas are welcome, please file issues or submit pull requests on GitHub.
+
+Feature requests that fall outside the project scope (library integration, automation, collection management) will be closed. If you're unsure whether something fits, open a discussion first.
+
+## Health Monitoring
+
+The application exposes a health endpoint at `/api/health` (no authentication required). Add a health check to your compose:
+
+```yaml
+healthcheck:
+  test: ["CMD", "curl", "-sf", "http://localhost:8084/api/health"]
+  interval: 30s
+  timeout: 30s
+  retries: 3
+```
+
+## Logging
+
+Logs are available via:
+- `docker logs <container-name>`
+- `/var/log/shelfmark/` inside the container (when `ENABLE_LOGGING=true`)
+
+Log level is configurable under Settings → Advanced or via the `LOG_LEVEL` environment
+variable (`DEBUG`, `INFO`, `WARNING`, `ERROR`, `CRITICAL`; case-insensitive, defaults to
+`INFO`). The environment variable wins over the setting, and `DEBUG=true` forces `DEBUG`
+regardless of either. Changes take effect on restart.
+
+## Development
+
+```bash
+# Quality checks
+make checks              # Run ALL static analysis (frontend + Python)
+make python-checks       # Run Ruff, BasedPyright, and Vulture
+make install-python-dev  # Sync Python runtime + dev tools with uv
+
+# Frontend development
+make install     # Install dependencies
+make dev         # Start Vite dev server (localhost:5173)
+make build       # Production build
+make frontend-typecheck  # TypeScript checks
+
+# Backend (Docker)
+make up          # Start backend via docker-compose.dev.yml
+make down        # Stop services
+make refresh     # Rebuild and restart
+make restart     # Restart container
+```
+
+The frontend dev server proxies to the backend on port 8084.
+
+## License
+
+MIT License - see [LICENSE](LICENSE) for details.
+
+## ⚠️ Disclaimer
+
+Shelfmark is a search interface that displays results from external metadata providers and sources. It does not host, store, or distribute any content. The developers are not responsible for how the tool is used or what is accessed through it.
+
+Users are solely responsible for:
+- Ensuring they have the legal right to download any material they access
+- Complying with copyright laws and intellectual property rights in their jurisdiction
+- Understanding and accepting the terms of any sources they configure
+
+Use of this tool is entirely at your own risk.
+
+## Support
+
+For issues or questions, please [file an issue](https://github.com/calibrain/shelfmark/issues) on GitHub.

requirements-base.txt

@@ -1,8 +0,0 @@
-flask
-requests[socks]
-beautifulsoup4
-tqdm
-dnspython
-gunicorn
-psutil
-emoji

requirements-cwa-bd.txt

@@ -1,4 +0,0 @@
-pyvirtualdisplay
-pyautogui
-seleniumbase>=4.41.1
-python-xlib

scripts/bypasser_permission_lab.sh

@@ -0,0 +1,246 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+LATEST_IMAGE="${LATEST_IMAGE:-ghcr.io/calibrain/shelfmark:latest}"
+LEGACY_IMAGE="${LEGACY_IMAGE:-ghcr.io/calibrain/shelfmark:v1.0.2}"
+WAIT_SECONDS="${WAIT_SECONDS:-5}"
+STARTUP_TIMEOUT_SECONDS="${STARTUP_TIMEOUT_SECONDS:-120}"
+
+require_cmd() {
+    command -v "$1" >/dev/null 2>&1 || {
+        echo "Missing required command: $1" >&2
+        exit 1
+    }
+}
+
+cleanup() {
+    local name="$1"
+    docker rm -f "$name" >/dev/null 2>&1 || true
+}
+
+wait_for_startup() {
+    local name="$1"
+    local elapsed=0
+
+    while [ "$elapsed" -lt "$STARTUP_TIMEOUT_SECONDS" ]; do
+        if ! docker inspect "$name" >/dev/null 2>&1; then
+            echo "Container $name no longer exists" >&2
+            return 1
+        fi
+
+        if [ "$(docker inspect -f '{{.State.Status}}' "$name" 2>/dev/null)" != "running" ]; then
+            echo "Container $name exited before startup completed" >&2
+            docker logs --tail 120 "$name" 2>&1 || true
+            return 1
+        fi
+
+        if docker exec "$name" sh -lc "getent passwd 1000 >/dev/null 2>&1 && ps -eo comm,args | awk '\$1 == \"gunicorn\" && index(\$0, \"shelfmark.main:app\") { found=1 } END { exit(found ? 0 : 1) }'" >/dev/null 2>&1; then
+            return 0
+        fi
+
+        sleep 1
+        elapsed=$((elapsed + 1))
+    done
+
+    echo "Timed out waiting for $name to finish startup" >&2
+    docker logs --tail 120 "$name" 2>&1 || true
+    return 1
+}
+
+start_container() {
+    local name="$1"
+    local image="$2"
+    local pre_entrypoint_script="${3:-}"
+
+    cleanup "$name"
+
+    if [ -n "$pre_entrypoint_script" ]; then
+        docker run -d \
+            --name "$name" \
+            --entrypoint sh \
+            -e PUID=1000 \
+            -e PGID=1000 \
+            -e TZ=UTC \
+            "$image" \
+            -lc "$pre_entrypoint_script
+exec /app/entrypoint.sh" >/dev/null
+    else
+        docker run -d \
+            --name "$name" \
+            -e PUID=1000 \
+            -e PGID=1000 \
+            -e TZ=UTC \
+            "$image" >/dev/null
+        sleep "$WAIT_SECONDS"
+    fi
+
+    wait_for_startup "$name"
+}
+
+run_probe() {
+    local name="$1"
+    local mode="${2:-default}"
+    docker exec -u 1000:1000 -e PROBE_MODE="$mode" "$name" sh -lc 'python3 - <<'"'"'PY'"'"'
+import asyncio
+import os
+import shelfmark.bypass.internal_bypasser as ib
+
+
+async def run_probe():
+    driver = None
+    probe_mode = os.environ.get("PROBE_MODE", "default")
+
+    if probe_mode == "proxy_auth" and hasattr(ib, "_get_proxy_string"):
+        ib._get_proxy_string = lambda _url: "user:pass@127.0.0.1:8888"
+
+    if hasattr(ib, "_create_cdp_browser"):
+        try:
+            driver = await ib._create_cdp_browser("https://example.com")
+            profile = getattr(getattr(driver, "config", None), "user_data_dir", "")
+            print(f"PROBE=OK mode={probe_mode} fn=_create_cdp_browser profile={profile}")
+        except Exception as e:
+            print(f"PROBE=ERR mode={probe_mode} fn=_create_cdp_browser type={type(e).__name__} msg={e}")
+        finally:
+            if driver and hasattr(ib, "_close_cdp_driver"):
+                await ib._close_cdp_driver(driver)
+        return
+
+    if hasattr(ib, "_create_driver"):
+        try:
+            driver = await ib._create_driver()
+            print(f"PROBE=OK mode={probe_mode} fn=_create_driver driver_type={type(driver).__name__}")
+        except Exception as e:
+            print(f"PROBE=ERR mode={probe_mode} fn=_create_driver type={type(e).__name__} msg={e}")
+        finally:
+            if driver and hasattr(ib, "_quit_driver"):
+                await ib._quit_driver(driver)
+        return
+
+    print(f"PROBE=ERR mode={probe_mode} fn=unknown type=RuntimeError msg=no supported startup function found")
+
+
+asyncio.run(run_probe())
+PY'
+}
+
+show_logs() {
+    local name="$1"
+    docker logs --tail 80 "$name" 2>&1 | tail -n 20
+}
+
+scenario_latest_baseline() {
+    local name="sb-lab-latest-baseline"
+    echo
+    echo "== latest baseline =="
+    start_container "$name" "$LATEST_IMAGE"
+    run_probe "$name"
+    cleanup "$name"
+}
+
+scenario_latest_drivers_readonly() {
+    local name="sb-lab-latest-drivers"
+    echo
+    echo "== latest drivers readonly =="
+    start_container "$name" "$LATEST_IMAGE" '
+        chown -R root:root /usr/local/lib/python3.10/site-packages/seleniumbase/drivers &&
+        chmod -R a-w /usr/local/lib/python3.10/site-packages/seleniumbase/drivers &&
+        ls -ld /usr/local/lib/python3.10/site-packages/seleniumbase/drivers
+    '
+    run_probe "$name"
+    cleanup "$name"
+}
+
+scenario_latest_proxy_auth_baseline() {
+    local name="sb-lab-latest-proxy-baseline"
+    echo
+    echo "== latest proxy auth baseline =="
+    start_container "$name" "$LATEST_IMAGE"
+    run_probe "$name" "proxy_auth"
+    cleanup "$name"
+}
+
+scenario_latest_downloads_readonly() {
+    local name="sb-lab-latest-downloads"
+    echo
+    echo "== latest downloaded_files readonly =="
+    start_container "$name" "$LATEST_IMAGE" '
+        mkdir -p /app/downloaded_files &&
+        touch /app/downloaded_files/pipfinding.lock /app/downloaded_files/proxy_dir.lock &&
+        chown -R root:root /app/downloaded_files &&
+        chmod -R a-w /app/downloaded_files &&
+        find /app/downloaded_files -maxdepth 2 -printf "%M %u:%g %p\n"
+    '
+    run_probe "$name"
+    show_logs "$name"
+    cleanup "$name"
+}
+
+scenario_latest_proxy_auth_downloads_readonly() {
+    local name="sb-lab-latest-proxy-downloads"
+    echo
+    echo "== latest proxy auth with readonly downloaded_files =="
+    start_container "$name" "$LATEST_IMAGE" '
+        mkdir -p /app/downloaded_files &&
+        touch /app/downloaded_files/pipfinding.lock /app/downloaded_files/proxy_dir.lock &&
+        chown 1000:1000 /app/downloaded_files/pipfinding.lock /app/downloaded_files/proxy_dir.lock &&
+        chmod 0666 /app/downloaded_files/pipfinding.lock /app/downloaded_files/proxy_dir.lock &&
+        chown root:root /app/downloaded_files &&
+        chmod 0555 /app/downloaded_files &&
+        ls -ld /app/downloaded_files &&
+        ls -la /app/downloaded_files
+    '
+    run_probe "$name" "proxy_auth"
+    show_logs "$name"
+    cleanup "$name"
+}
+
+scenario_latest_bind_mount_readonly() {
+    local name="sb-lab-latest-bind-ro"
+    local bind_dir
+    bind_dir="$(mktemp -d /tmp/sb-lab-bind.XXXXXX)"
+    echo
+    echo "== latest readonly bind mount for downloaded_files =="
+    chmod 0555 "$bind_dir"
+    cleanup "$name"
+    docker run -d \
+        --name "$name" \
+        -e PUID=1000 \
+        -e PGID=1000 \
+        -e TZ=UTC \
+        --mount "type=bind,src=${bind_dir},target=/app/downloaded_files,readonly" \
+        "$LATEST_IMAGE" >/dev/null
+    wait_for_startup "$name"
+    run_probe "$name"
+    show_logs "$name"
+    cleanup "$name"
+    rm -rf "$bind_dir"
+}
+
+scenario_legacy_drivers_readonly() {
+    local name="sb-lab-legacy-drivers"
+    echo
+    echo "== legacy drivers readonly =="
+    start_container "$name" "$LEGACY_IMAGE" '
+        chown -R root:root /usr/local/lib/python3.10/site-packages/seleniumbase/drivers &&
+        chmod -R a-w /usr/local/lib/python3.10/site-packages/seleniumbase/drivers &&
+        ls -ld /usr/local/lib/python3.10/site-packages/seleniumbase/drivers
+    '
+    run_probe "$name"
+    show_logs "$name"
+    cleanup "$name"
+}
+
+main() {
+    require_cmd docker
+
+    scenario_latest_baseline
+    scenario_latest_drivers_readonly
+    scenario_latest_proxy_auth_baseline
+    scenario_latest_downloads_readonly
+    scenario_latest_proxy_auth_downloads_readonly
+    scenario_latest_bind_mount_readonly
+    scenario_legacy_drivers_readonly
+}
+
+main "$@"

scripts/generate_env_docs.py

@@ -0,0 +1,560 @@
+#!/usr/bin/env python3
+"""Generate markdown documentation for environment variables from the settings registry.
+
+This script extracts all settings that support environment variable configuration
+and generates a comprehensive markdown file documenting each option.
+
+Usage:
+    python scripts/generate_env_docs.py [--output path/to/output.md]
+
+The generated documentation includes:
+- Environment variable name
+- Description
+- Type (string, number, boolean, etc.)
+- Default value
+- Organizational grouping by settings tab/group
+"""
+
+import argparse
+import sys
+from pathlib import Path
+from typing import Any
+
+# Add project root to path
+project_root = Path(__file__).resolve().parent.parent
+sys.path.insert(0, str(project_root))
+
+
+def get_field_type_name(field: Any) -> str:
+    """Get a human-readable type name for a field."""
+    from shelfmark.core.settings_registry import (
+        CheckboxField,
+        MultiSelectField,
+        NumberField,
+        OrderableListField,
+        PasswordField,
+        SelectField,
+        TagListField,
+        TextField,
+    )
+
+    if isinstance(field, CheckboxField):
+        return "boolean"
+    if isinstance(field, NumberField):
+        return "number"
+    if isinstance(field, SelectField):
+        return "string (choice)"
+    if isinstance(field, MultiSelectField):
+        return "string (comma-separated)"
+    if isinstance(field, TagListField):
+        return "string (comma-separated)"
+    if isinstance(field, OrderableListField):
+        return "JSON array"
+    if isinstance(field, PasswordField):
+        return "string (secret)"
+    if isinstance(field, TextField):
+        return "string"
+    return "string"
+
+
+def format_default_value(field: Any) -> str:
+    """Format the default value for display."""
+    default = field.default
+
+    if default is None:
+        return "_none_"
+    if isinstance(default, bool):
+        return f"`{str(default).lower()}`"
+    if isinstance(default, (int, float)):
+        return f"`{default}`"
+    if isinstance(default, str):
+        if default == "":
+            return "_empty string_"
+        return f"`{default}`"
+    if isinstance(default, list):
+        if not default:
+            return "_empty list_"
+        # For simple lists, show comma-separated values
+        if all(isinstance(item, str) for item in default):
+            return f"`{','.join(default)}`"
+        # For complex lists (e.g., OrderableListField defaults), summarize
+        return "_see UI for defaults_"
+    return f"`{default}`"
+
+
+def get_select_options(field: Any) -> list[str] | None:
+    """Get the available options for a SelectField.
+
+    Returns options formatted as 'value (label)' or just 'value' if they match,
+    so users know the actual values to use in environment variables.
+    """
+    from shelfmark.core.settings_registry import SelectField
+
+    if not isinstance(field, SelectField):
+        return None
+
+    options = field.options
+    if callable(options):
+        try:
+            options = options()
+        except Exception:
+            return None
+
+    if not options:
+        return None
+
+    result = []
+    for opt in options:
+        value = opt.get("value", "")
+        label = opt.get("label", "")
+
+        # Format as "value (label)" unless they're the same or value is empty
+        if value == "":
+            result.append(f'`""` ({label})')
+        elif value == label or not label:
+            result.append(f"`{value}`")
+        else:
+            result.append(f"`{value}` ({label})")
+
+    return result
+
+
+def _generate_bootstrap_env_docs() -> list[str]:
+    """Generate documentation for bootstrap environment variables from env.py."""
+    # These are environment variables defined in env.py that are used before
+    # the settings registry is available
+    bootstrap_vars = [
+        {
+            "name": "CONFIG_DIR",
+            "description": "Directory for storing configuration files and plugin settings.",
+            "type": "string (path)",
+            "default": "/config",
+        },
+        {
+            "name": "LOG_ROOT",
+            "description": "Root directory for log files.",
+            "type": "string (path)",
+            "default": "/var/log/",
+        },
+        {
+            "name": "TMP_DIR",
+            "description": "Staging directory for downloads before moving to destination.",
+            "type": "string (path)",
+            "default": "/tmp/shelfmark",
+        },
+        {
+            "name": "ENABLE_LOGGING",
+            "description": "Enable file logging under LOG_ROOT/shelfmark/ (including shelfmark.log and startup logs).",
+            "type": "boolean",
+            "default": "true",
+        },
+        {
+            "name": "FLASK_HOST",
+            "description": "Host address for the Flask web server.",
+            "type": "string",
+            "default": "0.0.0.0",
+        },
+        {
+            "name": "FLASK_PORT",
+            "description": "Port number for the Flask web server.",
+            "type": "number",
+            "default": "8084",
+        },
+        {
+            "name": "SESSION_COOKIE_SECURE",
+            "description": "Enable secure cookies (requires HTTPS).",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "CWA_DB_PATH",
+            "description": "Path to the Calibre-Web database for authentication integration.",
+            "type": "string (path)",
+            "default": "/auth/app.db",
+        },
+        {
+            "name": "HIDE_LOCAL_AUTH",
+            "description": "Hide the username/password login form when OIDC is active.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "DISABLE_LOCAL_AUTH",
+            "description": "Disable username/password login and remove the local-admin prerequisite for OIDC. Implies HIDE_LOCAL_AUTH; with AUTH_METHOD=builtin, everyone is locked out until auth env vars are changed.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "OIDC_AUTO_REDIRECT",
+            "description": "Automatically redirect to the OIDC provider instead of showing the login page.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "DOCKERMODE",
+            "description": "Indicates the application is running inside a Docker container.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "ONBOARDING",
+            "description": "Show the onboarding wizard on first run. Set to false to skip (useful for ephemeral storage).",
+            "type": "boolean",
+            "default": "true",
+        },
+    ]
+
+    lines = [
+        "## Bootstrap Configuration",
+        "",
+        "These environment variables are used at startup before the settings system loads. They typically configure paths, server settings, and authentication startup behavior.",
+        "",
+        "| Variable | Description | Type | Default |",
+        "|----------|-------------|------|---------|",
+    ]
+
+    lines.extend(
+        f"| `{var['name']}` | {var['description']} | {var['type']} | `{var['default']}` |"
+        for var in bootstrap_vars
+    )
+
+    lines.append("")
+    lines.append("<details>")
+    lines.append("<summary>Detailed descriptions</summary>")
+    lines.append("")
+
+    for var in bootstrap_vars:
+        lines.append(f"#### `{var['name']}`")
+        lines.append("")
+        lines.append(var["description"])
+        lines.append("")
+        lines.append(f"- **Type:** {var['type']}")
+        lines.append(f"- **Default:** `{var['default']}`")
+        lines.append("")
+
+    lines.append("</details>")
+    lines.append("")
+
+    return lines
+
+
+def _generate_egress_env_docs() -> list[str]:
+    """Generate documentation for VPN/Tor egress environment variables.
+
+    These are startup-only variables consumed by entrypoint.sh / wireguard.sh
+    (before and outside the settings registry) to select and configure the
+    transparent-egress kill-switch. `USING_TOR` has a registry-backed entry
+    under Network and is cross-referenced rather than repeated here so the two
+    mutually exclusive egress modes are discoverable side by side without
+    emitting a duplicate `#### USING_TOR` anchor.
+    """
+    egress_vars = [
+        {
+            "name": "USING_WIREGUARD",
+            "description": "Route all traffic through a WireGuard VPN tunnel with a fail-closed iptables kill-switch (non-tunnel egress is dropped). Requires root startup and NET_ADMIN (plus NET_RAW). Mutually exclusive with USING_TOR.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "WIREGUARD_CONFIG",
+            "description": "Path to the mounted wg-quick configuration file.",
+            "type": "string (path)",
+            "default": "/config/wg0.conf",
+        },
+        {
+            "name": "WIREGUARD_INTERFACE",
+            "description": "WireGuard interface name brought up by wg-quick.",
+            "type": "string",
+            "default": "wg0",
+        },
+        {
+            "name": "LAN_NETWORK",
+            "description": "Comma-separated CIDRs kept off the tunnel so the WebUI and internal download clients (Prowlarr, qBittorrent) stay reachable.",
+            "type": "string (comma-separated)",
+            "default": "127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16",
+        },
+        {
+            "name": "WIREGUARD_ENFORCE_DNS",
+            "description": "Pin the container's resolver so DNS cannot silently fall back to an off-tunnel path. The resolver used is WIREGUARD_DNS if set, else the tunnel config's DNS = line. This does NOT force queries through the tunnel: it is designed for a trusted LAN resolver kept reachable off-tunnel via LAN_NETWORK (the query leaves over the LAN; the resolver encrypts upstream while the download still egresses via the tunnel). Special case: when Docker's embedded resolver (nameserver 127.0.0.11) is present, it is PRESERVED so container-name resolution (e.g. prowlarr, qbittorrent) keeps working, and the embedded resolver's upstream must be pinned via the container's compose dns: list. Fails closed (refuses to start) only when no embedded resolver is present AND no resolver is defined, or /etc/resolv.conf is not writable.",
+            "type": "boolean",
+            "default": "true",
+        },
+        {
+            "name": "WIREGUARD_DNS",
+            "description": "Explicit resolver(s) (comma/space separated) to pin when WIREGUARD_ENFORCE_DNS is true and Docker's embedded resolver is NOT in use. Use when the VPN's pushed DNS filters domains you need; point it at a resolver reachable via the tunnel or an allowed LAN resolver. NOTE: when the embedded resolver (127.0.0.11) is present it is preserved and this value cannot repoint its upstream from inside the container — set the container's compose dns: list to the trusted resolver instead.",
+            "type": "string (comma-separated)",
+            "default": "unset (uses config DNS = line)",
+        },
+        {
+            "name": "WIREGUARD_DISABLE_IPV6",
+            "description": "Strip IPv6 Address/AllowedIPs/DNS from the tunnel config before wg-quick (many container kernels lack the ip6tables raw table wg-quick needs) and remove IPv6 as a leak surface.",
+            "type": "boolean",
+            "default": "true",
+        },
+        {
+            "name": "WIREGUARD_ALLOW_IPV6_LEAK",
+            "description": "Escape hatch: continue startup even when an IPv6 kill-switch cannot be installed AND IPv6 cannot be disabled. Only set when the container has no IPv6 connectivity, as IPv6 egress may otherwise bypass the tunnel.",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "WIREGUARD_ALLOW_WEBUI_OFFTUNNEL",
+            "description": "When false (default) the kill-switch is strictly fail-closed: the only off-tunnel egress permitted is loopback, the tunnel device and the LAN allowlist. Set true only if a NON-LAN client (e.g. a public reverse proxy on a different segment) must reach the WebUI; it permits app-server REPLY packets (--sport FLASK_PORT, conntrack REPLY) to leave off-tunnel. Server replies only, never client-initiated egress, so it cannot leak outbound browsing/downloads or the real IP for outbound requests, but it is still an off-tunnel path while the tunnel is down, hence opt-in. LAN WebUI clients never need it (covered by LAN_NETWORK).",
+            "type": "boolean",
+            "default": "false",
+        },
+        {
+            "name": "WIREGUARD_STALE_AFTER",
+            "description": "Seconds since the last WireGuard handshake before the healthcheck bounces the tunnel.",
+            "type": "number",
+            "default": "180",
+        },
+    ]
+
+    lines = [
+        "## Egress / VPN Routing",
+        "",
+        "These startup-only variables are consumed by `entrypoint.sh` / `wireguard.sh` to select and configure the WireGuard transparent-egress kill-switch. `USING_WIREGUARD` and [`USING_TOR`](#using_tor) (documented under Network) are mutually exclusive; both require root startup.",
+        "",
+        "| Variable | Description | Type | Default |",
+        "|----------|-------------|------|---------|",
+    ]
+
+    lines.extend(
+        f"| `{var['name']}` | {var['description']} | {var['type']} | `{var['default']}` |"
+        for var in egress_vars
+    )
+
+    lines.append("")
+    lines.append("<details>")
+    lines.append("<summary>Detailed descriptions</summary>")
+    lines.append("")
+
+    for var in egress_vars:
+        lines.append(f"#### `{var['name']}`")
+        lines.append("")
+        lines.append(var["description"])
+        lines.append("")
+        lines.append(f"- **Type:** {var['type']}")
+        lines.append(f"- **Default:** `{var['default']}`")
+        lines.append("")
+
+    lines.append("</details>")
+    lines.append("")
+
+    return lines
+
+
+def generate_env_docs() -> str:
+    """Generate markdown documentation for all environment variables."""
+    # Import settings modules to ensure all settings are registered
+    import shelfmark.config.security
+    import shelfmark.config.settings
+    import shelfmark.metadata_providers.googlebooks
+    import shelfmark.metadata_providers.hardcover
+    import shelfmark.metadata_providers.openlibrary
+    import shelfmark.release_sources.irc.settings
+    import shelfmark.release_sources.prowlarr.settings  # noqa: F401
+    from shelfmark.core.settings_registry import (
+        get_all_groups,
+        get_all_settings_tabs,
+    )
+
+    tabs = get_all_settings_tabs()
+    groups = {g.name: g for g in get_all_groups()}
+
+    # Organize tabs by group
+    grouped_tabs: dict[str | None, list] = {None: []}
+    for group_name in groups:
+        grouped_tabs[group_name] = []
+
+    for tab in tabs:
+        group_name = tab.group
+        if group_name not in grouped_tabs:
+            grouped_tabs[group_name] = []
+        grouped_tabs[group_name].append(tab)
+
+    # Build markdown output
+    lines = [
+        "# Environment Variables",
+        "",
+        "This document lists all configuration options that can be set via environment variables.",
+        "",
+        "> **Auto-generated** - Do not edit manually. Run `python scripts/generate_env_docs.py` to regenerate.",
+        "",
+        "## Table of Contents",
+        "",
+    ]
+
+    # Generate TOC
+    toc_entries = [
+        "- [Bootstrap Configuration](#bootstrap-configuration)",
+        "- [Egress / VPN Routing](#egress--vpn-routing)",
+    ]
+
+    # Ungrouped tabs first
+    for tab in grouped_tabs.get(None, []):
+        anchor = tab.display_name.lower().replace(" ", "-")
+        toc_entries.append(f"- [{tab.display_name}](#{anchor})")
+
+    # Then grouped tabs
+    for group_name, group in groups.items():
+        group_tabs = grouped_tabs.get(group_name, [])
+        if group_tabs:
+            anchor = group.display_name.lower().replace(" ", "-")
+            toc_entries.append(f"- [{group.display_name}](#{anchor})")
+            for tab in group_tabs:
+                sub_anchor = f"{group.display_name}-{tab.display_name}".lower().replace(" ", "-")
+                toc_entries.append(f"  - [{tab.display_name}](#{sub_anchor})")
+
+    lines.extend(toc_entries)
+    lines.append("")
+    lines.append("---")
+    lines.append("")
+
+    # Add bootstrap environment variables documentation
+    lines.extend(_generate_bootstrap_env_docs())
+
+    # Add egress / VPN routing (startup-only, shell-driven) documentation
+    lines.extend(_generate_egress_env_docs())
+
+    # Generate documentation for ungrouped tabs
+    for tab in grouped_tabs.get(None, []):
+        lines.extend(_generate_tab_docs(tab))
+
+    # Generate documentation for grouped tabs
+    for group_name, group in groups.items():
+        group_tabs = grouped_tabs.get(group_name, [])
+        if not group_tabs:
+            continue
+
+        lines.append(f"## {group.display_name}")
+        lines.append("")
+
+        for tab in group_tabs:
+            lines.extend(_generate_tab_docs(tab, group_prefix=group.display_name))
+
+    return "\n".join(lines)
+
+
+def _generate_tab_docs(tab: Any, group_prefix: str | None = None) -> list[str]:
+    """Generate documentation for a single settings tab."""
+    from shelfmark.core.settings_registry import iter_value_fields
+
+    lines = []
+
+    # Section header
+    if group_prefix:
+        lines.append(f"### {group_prefix}: {tab.display_name}")
+    else:
+        lines.append(f"## {tab.display_name}")
+
+    lines.append("")
+
+    # Collect env-supported fields
+    env_fields = [
+        field for field in iter_value_fields(tab) if getattr(field, "env_supported", True)
+    ]
+
+    if not env_fields:
+        lines.append("_No environment variables for this section._")
+        lines.append("")
+        return lines
+
+    # Generate table
+    lines.append("| Variable | Description | Type | Default |")
+    lines.append("|----------|-------------|------|---------|")
+
+    for field in env_fields:
+        env_var = field.get_env_var_name()
+        description = field.description or field.label
+        # Clean up description for table (remove newlines, escape pipes)
+        description = description.replace("\n", " ").replace("|", "\\|").strip()
+
+        field_type = get_field_type_name(field)
+        default = format_default_value(field)
+
+        lines.append(f"| `{env_var}` | {description} | {field_type} | {default} |")
+
+    lines.append("")
+
+    # Add detailed documentation for each field
+    lines.append("<details>")
+    lines.append("<summary>Detailed descriptions</summary>")
+    lines.append("")
+
+    for field in env_fields:
+        env_var = field.get_env_var_name()
+        lines.append(f"#### `{env_var}`")
+        lines.append("")
+        lines.append(f"**{field.label}**")
+        lines.append("")
+
+        if field.description:
+            lines.append(field.description)
+            lines.append("")
+
+        lines.append(f"- **Type:** {get_field_type_name(field)}")
+        lines.append(f"- **Default:** {format_default_value(field)}")
+
+        if getattr(field, "required", False):
+            lines.append("- **Required:** Yes")
+
+        if getattr(field, "requires_restart", False):
+            lines.append("- **Requires restart:** Yes")
+
+        # Show options for SelectField
+        options = get_select_options(field)
+        if options:
+            lines.append(f"- **Options:** {', '.join(options)}")
+
+        # Show constraints for NumberField
+        from shelfmark.core.settings_registry import NumberField
+
+        if isinstance(field, NumberField):
+            constraints = []
+            if field.min_value is not None:
+                constraints.append(f"min: {field.min_value}")
+            if field.max_value is not None:
+                constraints.append(f"max: {field.max_value}")
+            if constraints:
+                lines.append(f"- **Constraints:** {', '.join(constraints)}")
+
+        lines.append("")
+
+    lines.append("</details>")
+    lines.append("")
+
+    return lines
+
+
+def main() -> None:
+    parser = argparse.ArgumentParser(
+        description="Generate markdown documentation for environment variables"
+    )
+    parser.add_argument(
+        "--output",
+        "-o",
+        type=Path,
+        default=project_root / "docs" / "environment-variables.md",
+        help="Output file path (default: docs/environment-variables.md)",
+    )
+    parser.add_argument(
+        "--stdout",
+        action="store_true",
+        help="Print to stdout instead of file",
+    )
+    args = parser.parse_args()
+
+    docs = generate_env_docs()
+
+    if args.stdout:
+        print(docs)
+    else:
+        args.output.parent.mkdir(parents=True, exist_ok=True)
+        args.output.write_text(docs)
+        print(f"Generated: {args.output}")
+
+
+if __name__ == "__main__":
+    main()

scripts/test_clients.py

@@ -0,0 +1,566 @@
+#!/usr/bin/env python3
+"""
+Test script for download client implementations.
+
+Usage:
+    1. Start the test stack:
+       docker compose -f docker-compose.test-clients.yml up -d
+
+    2. Wait for containers to initialize (first run takes ~30s)
+
+    3. Run this script to verify clients are accessible:
+       uv run python scripts/test_clients.py
+
+    4. Access cwabd at http://localhost:8084
+       - Go to Settings > Prowlarr > Download Clients
+       - Select a client from the dropdown
+       - Click "Test Connection" to verify
+
+Web UIs:
+    - cwabd:        http://localhost:8084
+    - qBittorrent:  http://localhost:8080
+    - Transmission: http://localhost:9091
+    - Deluge:       http://localhost:8112
+    - NZBGet:       http://localhost:6789
+    - SABnzbd:      http://localhost:8085
+    - rTorrent:     http://localhost:8000 (web ui http://localhost:8089 via ruTorrent)
+
+Prerequisites (for running this script locally):
+    uv sync --locked
+
+First-Time Setup:
+    qBittorrent:
+        - Check container logs for temporary password: docker logs test-qbittorrent
+        - Login at http://localhost:8080, change password to something known
+        - Default username is 'admin'
+
+    Transmission:
+        - No setup needed, credentials pre-configured (admin/admin)
+
+    Deluge:
+        - Access Web UI at http://localhost:8112 (default password: deluge)
+
+    NZBGet:
+        - No setup needed, credentials pre-configured (admin/admin)
+
+    SABnzbd:
+        - Complete the setup wizard at http://localhost:8085
+        - API key will be auto-detected by this script
+        - In cwabd, copy API key from SABnzbd Config > General
+"""
+
+import sys
+import time
+from pathlib import Path
+from typing import Any
+
+# Test configuration - matches docker-compose.test-clients.yml
+CONFIG = {
+    # Usenet clients
+    "nzbget": {
+        "url": "http://localhost:6789",
+        "username": "admin",
+        "password": "admin",
+    },
+    "sabnzbd": {
+        "url": "http://localhost:8085",
+        "api_key": None,  # Will be read from config on first run
+    },
+    # Torrent clients
+    "qbittorrent": {
+        "url": "http://localhost:8080",
+        "username": "admin",
+        "password": "5NCngsHXm",  # Temp password from: docker logs test-qbittorrent | grep password
+    },
+    "transmission": {
+        "url": "http://localhost:9091",
+        "username": "admin",
+        "password": "admin",
+    },
+    "deluge": {
+        "url": "http://localhost:8112",
+        "password": "deluge",
+    },
+    "rtorrent": {
+        "url": "http://localhost:8000/RPC2",
+    },
+}
+
+# Test magnet link (Ubuntu ISO - legal, small metadata)
+TEST_MAGNET = "magnet:?xt=urn:btih:3b245504cf5f11bbdbe1201cea6a6bf45aee1bc0&dn=ubuntu-22.04.3-live-server-amd64.iso"
+
+
+def test_nzbget() -> bool:
+    """Test NZBGet connection."""
+    import requests
+
+    print("\n" + "=" * 50)
+    print("Testing NZBGet")
+    print("=" * 50)
+
+    url = CONFIG["nzbget"]["url"]
+    username = CONFIG["nzbget"]["username"]
+    password = CONFIG["nzbget"]["password"]
+
+    try:
+        # Test connection via JSON-RPC
+        rpc_url = f"{url}/jsonrpc"
+        response = requests.post(
+            rpc_url,
+            json={"method": "version", "params": []},
+            auth=(username, password),
+            timeout=10,
+        )
+        response.raise_for_status()
+        result = response.json()
+        version = result.get("result", "unknown")
+        print(f"  Connected to NZBGet {version}")
+
+        # Test status
+        response = requests.post(
+            rpc_url,
+            json={"method": "status", "params": []},
+            auth=(username, password),
+            timeout=10,
+        )
+        status = response.json().get("result", {})
+        print(f"  Server state: {'Paused' if status.get('ServerPaused') else 'Running'}")
+        print(f"  Downloads in queue: {status.get('DownloadedSizeMB', 0)} MB downloaded")
+
+        print("  SUCCESS: NZBGet is working!")
+        return True
+
+    except requests.exceptions.ConnectionError:
+        print("  ERROR: Could not connect to NZBGet")
+        print("  Is the container running? docker ps | grep nzbget")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        return False
+
+
+def test_sabnzbd() -> bool:
+    """Test SABnzbd connection."""
+    import requests
+
+    print("\n" + "=" * 50)
+    print("Testing SABnzbd")
+    print("=" * 50)
+
+    url = CONFIG["sabnzbd"]["url"]
+    api_key = CONFIG["sabnzbd"]["api_key"]
+
+    # Try to get API key from config if not set
+    if not api_key:
+        try:
+            ini_path = Path(".local/test-clients/sabnzbd/config/sabnzbd.ini")
+            if ini_path.exists():
+                with ini_path.open() as f:
+                    for line in f:
+                        if line.startswith("api_key"):
+                            api_key = line.split("=")[1].strip()
+                            print(f"  Found API key in config: {api_key[:8]}...")
+                            break
+        except Exception as e:
+            print(f"  Could not read API key from config: {e}")
+
+    if not api_key:
+        print("  ERROR: No API key configured")
+        print("  Please access http://localhost:8085 and complete initial setup")
+        print("  Then copy the API key from Config > General")
+        return False
+
+    try:
+        # Test connection
+        response = requests.get(
+            f"{url}/api",
+            params={"apikey": api_key, "mode": "version", "output": "json"},
+            timeout=10,
+        )
+        response.raise_for_status()
+        result = response.json()
+        version = result.get("version", "unknown")
+        print(f"  Connected to SABnzbd {version}")
+
+        # Test queue status
+        response = requests.get(
+            f"{url}/api",
+            params={"apikey": api_key, "mode": "queue", "output": "json"},
+            timeout=10,
+        )
+        queue = response.json().get("queue", {})
+        print(f"  Queue status: {queue.get('status', 'unknown')}")
+        print(f"  Items in queue: {len(queue.get('slots', []))}")
+
+        print("  SUCCESS: SABnzbd is working!")
+        return True
+
+    except requests.exceptions.ConnectionError:
+        print("  ERROR: Could not connect to SABnzbd")
+        print("  Is the container running? docker ps | grep sabnzbd")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        return False
+
+
+def test_qbittorrent() -> bool:
+    """Test qBittorrent connection."""
+    print("\n" + "=" * 50)
+    print("Testing qBittorrent")
+    print("=" * 50)
+
+    try:
+        import qbittorrentapi
+
+        url = CONFIG["qbittorrent"]["url"]
+        username = CONFIG["qbittorrent"]["username"]
+        password = CONFIG["qbittorrent"]["password"]
+
+        # Parse URL for host/port
+        from urllib.parse import urlparse
+
+        parsed = urlparse(url)
+
+        client = qbittorrentapi.Client(
+            host=parsed.hostname,
+            port=parsed.port or 8080,
+            username=username,
+            password=password,
+        )
+
+        # Test connection
+        client.auth_log_in()
+        version = client.app.version
+        print(f"  Connected to qBittorrent {version}")
+
+        # Get torrent list
+        torrents = client.torrents_info()
+        print(f"  Active torrents: {len(torrents)}")
+
+        # Test adding a torrent (then remove it)
+        print("  Testing add/remove torrent...")
+        result = client.torrents_add(urls=TEST_MAGNET, is_paused=True)
+        if result == "Ok.":
+            # Wait a moment for it to be added
+            time.sleep(1)
+            torrents = client.torrents_info()
+            if torrents:
+                test_torrent = torrents[-1]  # Most recently added
+                print(f"  Added test torrent: {test_torrent.name[:50]}...")
+                print(f"  Status: {test_torrent.state}")
+
+                # Remove it
+                client.torrents_delete(torrent_hashes=test_torrent.hash, delete_files=True)
+                print("  Removed test torrent")
+        else:
+            print(f"  Add result: {result}")
+
+        print("  SUCCESS: qBittorrent is working!")
+        return True
+
+    except ImportError:
+        print("  ERROR: qbittorrent-api not installed")
+        print("  Run: uv sync --locked")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        if "Forbidden" in str(e) or "401" in str(e):
+            print("\n  Authentication failed. Check password:")
+            print("  1. docker logs test-qbittorrent | grep password")
+            print("  2. Login to http://localhost:8080 and set a known password")
+        return False
+
+
+def test_transmission() -> bool:
+    """Test Transmission connection."""
+    print("\n" + "=" * 50)
+    print("Testing Transmission")
+    print("=" * 50)
+
+    try:
+        from urllib.parse import urlparse
+
+        from transmission_rpc import Client
+
+        url = CONFIG["transmission"]["url"]
+        parsed = urlparse(url)
+
+        client = Client(
+            host=parsed.hostname,
+            port=parsed.port or 9091,
+            username=CONFIG["transmission"]["username"],
+            password=CONFIG["transmission"]["password"],
+        )
+
+        # Test connection
+        session = client.get_session()
+        print(f"  Connected to Transmission {session.version}")
+
+        # Get torrent list
+        torrents = client.get_torrents()
+        print(f"  Active torrents: {len(torrents)}")
+
+        # Test adding a torrent (then remove it)
+        print("  Testing add/remove torrent...")
+        torrent = client.add_torrent(TEST_MAGNET, paused=True)
+        print(f"  Added test torrent: {torrent.name[:50]}...")
+
+        # Get status
+        status = client.get_torrent(torrent.id)
+        print(f"  Status: {status.status} ({status.percent_done * 100:.1f}%)")
+
+        # Remove it
+        client.remove_torrent(torrent.id, delete_data=True)
+        print("  Removed test torrent")
+
+        print("  SUCCESS: Transmission is working!")
+        return True
+
+    except ImportError:
+        print("  ERROR: transmission-rpc not installed")
+        print("  Run: uv sync --locked")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        return False
+
+
+def test_deluge() -> bool:
+    """Test Deluge Web UI (JSON-RPC) connection."""
+    import requests
+
+    print("\n" + "=" * 50)
+    print("Testing Deluge")
+    print("=" * 50)
+
+    base_url = CONFIG["deluge"]["url"].rstrip("/")
+    password = CONFIG["deluge"]["password"]
+    rpc_url = f"{base_url}/json"
+
+    def rpc_call(session: requests.Session, rpc_id: int, method: str, *params: Any) -> Any:
+        payload = {"id": rpc_id, "method": method, "params": list(params)}
+        resp = session.post(rpc_url, json=payload, timeout=10)
+        resp.raise_for_status()
+        data = resp.json()
+        if data.get("error"):
+            err = data["error"]
+            if isinstance(err, dict):
+                raise Exception(err.get("message") or str(err))
+            raise Exception(str(err))
+        return data.get("result")
+
+    try:
+        session = requests.Session()
+
+        # Authenticate to Deluge Web
+        if rpc_call(session, 1, "auth.login", password) is not True:
+            raise Exception("Authentication failed (check Deluge Web UI password)")
+
+        # Ensure Deluge Web is connected to a daemon
+        if rpc_call(session, 2, "web.connected") is not True:
+            hosts = rpc_call(session, 3, "web.get_hosts") or []
+            if not hosts:
+                raise Exception(
+                    "Deluge Web UI isn't connected to Deluge core (no hosts configured). "
+                    "Add/connect a daemon in Deluge Web UI → Connection Manager."
+                )
+
+            host_id = hosts[0][0]
+            for entry in hosts:
+                if (
+                    isinstance(entry, list)
+                    and len(entry) >= 2
+                    and entry[1] in {"127.0.0.1", "localhost"}
+                ):
+                    host_id = entry[0]
+                    break
+
+            rpc_call(session, 4, "web.connect", host_id)
+
+            if rpc_call(session, 5, "web.connected") is not True:
+                raise Exception(
+                    "Deluge Web UI couldn't connect to Deluge core. "
+                    "Check Deluge Web UI → Connection Manager."
+                )
+
+        version = rpc_call(session, 6, "daemon.info")
+        print(f"  Connected to Deluge {version}")
+
+        torrents = rpc_call(session, 7, "core.get_torrents_status", {}, ["name"]) or {}
+        print(f"  Active torrents: {len(torrents)}")
+
+        # Test adding a torrent (then remove it)
+        print("  Testing add/remove torrent...")
+        torrent_id = rpc_call(
+            session, 8, "core.add_torrent_magnet", TEST_MAGNET, {"add_paused": True}
+        )
+
+        if torrent_id:
+            torrent_id = str(torrent_id)
+            print(f"  Added test torrent: {torrent_id[:20]}...")
+
+            status = (
+                rpc_call(session, 9, "core.get_torrent_status", torrent_id, ["state", "progress"])
+                or {}
+            )
+            state = status.get("state", "unknown") if isinstance(status, dict) else "unknown"
+            progress = status.get("progress", 0) if isinstance(status, dict) else 0
+            print(f"  Status: {state} ({progress:.1f}%)")
+
+            rpc_call(session, 10, "core.remove_torrent", torrent_id, True)
+            print("  Removed test torrent")
+        else:
+            print("  WARNING: Could not add test torrent")
+
+        print("  SUCCESS: Deluge is working!")
+        return True
+
+    except requests.exceptions.ConnectionError:
+        print("  ERROR: Could not connect to Deluge Web UI")
+        print("  Is the container running? docker ps | grep deluge")
+        return False
+    except requests.exceptions.Timeout:
+        print("  ERROR: Deluge Web UI connection timed out")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        if "auth" in str(e).lower() or "login" in str(e).lower():
+            print("  Check Deluge Web UI password (default: deluge)")
+        return False
+
+
+def test_rtorrent() -> bool:
+    """Test rTorrent connection."""
+    print("\n" + "=" * 50)
+    print("Testing rTorrent")
+    print("=" * 50)
+
+    try:
+        import xmlrpc.client
+
+        url = "http://localhost:8000/RPC2"
+        client = xmlrpc.client.ServerProxy(url)
+
+        # Test connection
+        version = client.system.library_version()
+        print(f"  Connected to rTorrent {version}")
+
+        # default download directory test
+        default_dir = client.directory.default()
+        print(f"  Default download directory: {default_dir}")
+
+        # Get torrent list
+        torrents = client.download_list()
+        print(f"  Active torrents: {len(torrents)}")
+
+        # Test adding a torrent (then remove it)
+        print("  Testing add/remove torrent...")
+
+        label = "automated"
+
+        commands = []
+        if label:
+            commands.append(f"d.custom1.set={label}")
+
+        download_dir = "/downloads"
+        if download_dir:
+            commands.append(f"d.directory_base.set={download_dir}")
+
+        # rtorrent is weird in that it doesn't return the torrent ID/hash on add
+        client.load.start("", TEST_MAGNET, ";".join(commands))
+
+        # but we know that it is 3b245504cf5f11bbdbe1201cea6a6bf45aee1bc0 from the magnet link
+        torrent_id = "3B245504CF5F11BBDBE1201CEA6A6BF45AEE1BC0"  # rtorrent uses uppercase hashes
+        print(f"  Added test torrent: {torrent_id}")
+
+        torrents = client.download_list()
+        print(f"  Active torrents: {len(torrents)}")
+
+        torrent_list = client.d.multicall.filtered(
+            "",
+            "default",
+            f"equal={{d.hash=,cat={torrent_id}}}d.hash=",
+            "d.state=",
+            "d.completed_bytes=",
+            "d.size_bytes=",
+            "d.down.rate=",
+            "d.up.rate=",
+            "d.custom1=",
+            "d.complete=",
+        )
+        torrent = torrent_list[0]
+
+        if not torrent:
+            print("  ERROR: Could not find added torrent in list")
+            return False
+
+        # let's test the base path call
+        details = client.d.multicall.filtered(
+            "",
+            "default",
+            f"equal=d.hash=,cat={torrent_id}",
+            "d.base_path=",
+        )
+
+        base_path = details[0][0] if details else None
+
+        print(f"  Base path: {base_path}")
+        client.d.erase(torrent_id)
+        print("  Removed test torrent")
+
+        print("  SUCCESS: rTorrent is working!")
+        return True
+
+    except ImportError:
+        print("  ERROR: xmlrpc.client not available")
+        return False
+    except Exception as e:
+        print(f"  ERROR: {e}")
+        if "Connection refused" in str(e):
+            print("  Is the container running? docker ps | grep rtorrent")
+        return False
+
+
+def main() -> int:
+    print("Download Client Test Suite")
+    print("=" * 50)
+    print("Make sure containers are running:")
+    print("  docker compose -f docker-compose.test-clients.yml up -d")
+
+    results = {}
+
+    # Test usenet clients
+    print("\n" + "=" * 50)
+    print("USENET CLIENTS")
+    print("=" * 50)
+    results["nzbget"] = test_nzbget()
+    results["sabnzbd"] = test_sabnzbd()
+
+    # Test torrent clients
+    print("\n" + "=" * 50)
+    print("TORRENT CLIENTS")
+    print("=" * 50)
+    results["qbittorrent"] = test_qbittorrent()
+    results["transmission"] = test_transmission()
+    results["deluge"] = test_deluge()
+    results["rtorrent"] = test_rtorrent()
+
+    # Summary
+    print("\n" + "=" * 50)
+    print("SUMMARY")
+    print("=" * 50)
+
+    for client, success in results.items():
+        status = "PASS" if success else "FAIL"
+        print(f"  {client}: {status}")
+
+    passed = sum(results.values())
+    total = len(results)
+    print(f"\n  Total: {passed}/{total} passed")
+
+    return 0 if passed == total else 1
+
+
+if __name__ == "__main__":
+    sys.exit(main())

shelfmark/__init__.py

@@ -0,0 +1 @@
+"""Shelfmark - book search and download service."""

shelfmark/__main__.py

@@ -0,0 +1,23 @@
+"""Package entry point for `python -m shelfmark`."""
+
+from shelfmark.config.env import FLASK_HOST, FLASK_PORT
+from shelfmark.core.config import config
+from shelfmark.main import app, socketio
+
+
+def _resolve_debug_flag(value: object) -> bool:
+    """Normalize DEBUG config values for Flask-SocketIO startup."""
+    if isinstance(value, bool):
+        return value
+    if isinstance(value, str):
+        return value.strip().lower() in {"1", "true", "yes", "on"}
+    return bool(value)
+
+
+if __name__ == "__main__":
+    socketio.run(
+        app,
+        host=FLASK_HOST,
+        port=FLASK_PORT,
+        debug=_resolve_debug_flag(config.get("DEBUG", False)),
+    )

shelfmark/api/__init__.py

@@ -0,0 +1 @@
+"""API module - WebSocket handling."""

shelfmark/api/websocket.py

@@ -0,0 +1,218 @@
+"""WebSocket manager for real-time status updates."""
+
+from __future__ import annotations
+
+import logging
+import threading
+from typing import TYPE_CHECKING, Any
+
+from flask_socketio import SocketIO, join_room, leave_room
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+    from flask import Flask
+
+logger = logging.getLogger(__name__)
+
+
+class WebSocketManager:
+    """Manages WebSocket connections and broadcasts."""
+
+    def __init__(self) -> None:
+        """Initialize in-memory connection and room tracking."""
+        self.socketio: SocketIO | None = None
+        self._enabled = False
+        self._connection_count = 0
+        self._connection_lock = threading.Lock()
+        self._user_rooms: dict[str, int] = {}  # room_name -> ref count
+        self._sid_rooms: dict[str, str] = {}  # sid -> room_name
+        self._rooms_lock = threading.Lock()
+        self._queue_status_fn: Callable | None = None  # Reference to queue_status()
+
+    def init_app(self, app: Flask, socketio: SocketIO) -> None:
+        """Initialize the WebSocket manager with Flask-SocketIO instance."""
+        self.socketio = socketio
+        self._enabled = True
+        logger.info("WebSocket manager initialized")
+
+    def client_connected(self) -> None:
+        """Track a new client connection. Call this from the connect event handler."""
+        with self._connection_lock:
+            self._connection_count += 1
+            current_count = self._connection_count
+
+        logger.debug("Client connected. Active connections: %s", current_count)
+
+    def client_disconnected(self) -> None:
+        """Track a client disconnection. Call this from the disconnect event handler."""
+        with self._connection_lock:
+            self._connection_count = max(0, self._connection_count - 1)
+            current_count = self._connection_count
+
+        logger.debug("Client disconnected. Active connections: %s", current_count)
+
+    def is_enabled(self) -> bool:
+        """Check if WebSocket is enabled and ready."""
+        return self._enabled and self.socketio is not None
+
+    def _get_socketio(self) -> SocketIO | None:
+        if not self._enabled:
+            return None
+        return self.socketio
+
+    def set_queue_status_fn(self, fn: Callable) -> None:
+        """Set the queue_status function reference for per-room filtering."""
+        self._queue_status_fn = fn
+
+    def _increment_user_room_locked(self, room: str) -> None:
+        self._user_rooms[room] = self._user_rooms.get(room, 0) + 1
+
+    def _decrement_user_room_locked(self, room: str) -> None:
+        count = self._user_rooms.get(room, 1) - 1
+        if count <= 0:
+            self._user_rooms.pop(room, None)
+        else:
+            self._user_rooms[room] = count
+
+    def _set_sid_room_locked(self, sid: str, room: str | None) -> None:
+        current_room = self._sid_rooms.get(sid)
+        if current_room == room:
+            return
+
+        if current_room is not None:
+            leave_room(current_room, sid=sid)
+            if current_room.startswith("user_"):
+                self._decrement_user_room_locked(current_room)
+            self._sid_rooms.pop(sid, None)
+
+        if room is not None:
+            join_room(room, sid=sid)
+            self._sid_rooms[sid] = room
+            if room.startswith("user_"):
+                self._increment_user_room_locked(room)
+
+    def sync_user_room(
+        self,
+        sid: str,
+        is_admin: bool,
+        db_user_id: int | None = None,
+    ) -> None:
+        """Ensure a SID is in exactly one room matching the current session scope."""
+        room: str | None = None
+        if is_admin:
+            room = "admins"
+        elif db_user_id is not None:
+            room = f"user_{db_user_id}"
+
+        with self._rooms_lock:
+            self._set_sid_room_locked(sid, room)
+
+    def join_user_room(
+        self,
+        sid: str,
+        is_admin: bool,
+        db_user_id: int | None = None,
+    ) -> None:
+        """Join the appropriate room based on user role."""
+        self.sync_user_room(sid, is_admin=is_admin, db_user_id=db_user_id)
+
+    def leave_user_room(
+        self,
+        sid: str,
+        *,
+        is_admin: bool = False,
+        db_user_id: int | None = None,
+    ) -> None:
+        """Leave whichever room the SID currently belongs to."""
+        del is_admin, db_user_id  # Backward-compatible signature; routing is SID-based.
+        with self._rooms_lock:
+            self._set_sid_room_locked(sid, None)
+
+    def broadcast_status_update(self, status_data: dict[str, Any]) -> None:
+        """Broadcast status update to all connected clients, filtered by user room."""
+        socketio = self._get_socketio()
+        if socketio is None:
+            return
+
+        try:
+            # Admins (and no-auth users) get full status
+            socketio.emit("status_update", status_data, to="admins")
+
+            # Each user room gets filtered status
+            with self._rooms_lock:
+                active_rooms = list(self._user_rooms.keys())
+
+            if active_rooms and self._queue_status_fn:
+                for room in active_rooms:
+                    self._broadcast_status_update_to_room(room)
+
+            logger.debug("Broadcasted status update to all rooms")
+        except Exception:
+            logger.exception("Error broadcasting status update")
+
+    def _broadcast_status_update_to_room(self, room: str) -> None:
+        """Broadcast status update to one user room."""
+        socketio = self._get_socketio()
+        if socketio is None:
+            return
+
+        try:
+            # Extract user_id from room name "user_123"
+            uid = int(room.split("_", 1)[1])
+            filtered = self._queue_status_fn(user_id=uid) if self._queue_status_fn else None
+            if filtered is not None:
+                socketio.emit("status_update", filtered, to=room)
+        except Exception:
+            logger.exception("Failed to send status update for room %s", room)
+
+    def broadcast_download_progress(
+        self, book_id: str, progress: float, status: str, user_id: int | None = None
+    ) -> None:
+        """Broadcast download progress update for a specific book."""
+        socketio = self._get_socketio()
+        if socketio is None:
+            return
+
+        try:
+            data = {"book_id": book_id, "progress": progress, "status": status}
+            # Admins always see all progress
+            socketio.emit("download_progress", data, to="admins")
+            # If task belongs to a specific user, send to their room too
+            if user_id is not None:
+                room = f"user_{user_id}"
+                with self._rooms_lock:
+                    if room in self._user_rooms:
+                        socketio.emit("download_progress", data, to=room)
+            logger.debug("Broadcasted progress for book %s: %s%%", book_id, progress)
+        except Exception:
+            logger.exception("Error broadcasting download progress")
+
+    def broadcast_search_status(
+        self,
+        source: str,
+        provider: str,
+        book_id: str,
+        message: str,
+        phase: str = "searching",
+    ) -> None:
+        """Broadcast search status update for a release source search."""
+        socketio = self._get_socketio()
+        if socketio is None:
+            return
+
+        try:
+            data = {
+                "source": source,
+                "provider": provider,
+                "book_id": book_id,
+                "message": message,
+                "phase": phase,
+            }
+            socketio.emit("search_status", data)
+        except Exception:
+            logger.exception("Error broadcasting search status")
+
+
+# Global WebSocket manager instance
+ws_manager = WebSocketManager()

shelfmark/bypass/__init__.py

@@ -0,0 +1,5 @@
+"""Cloudflare bypass utilities."""
+
+
+class BypassCancelledError(Exception):
+    """Raised when a bypass operation is cancelled."""

shelfmark/bypass/external_bypasser.py

@@ -0,0 +1,189 @@
+"""External Cloudflare bypasser using FlareSolverr."""
+
+import random
+import time
+from typing import TYPE_CHECKING
+
+import requests
+
+from shelfmark.bypass import BypassCancelledError
+from shelfmark.core.config import config
+from shelfmark.core.logger import setup_logger
+from shelfmark.core.utils import normalize_http_url
+from shelfmark.download.network import get_ssl_verify
+
+if TYPE_CHECKING:
+    from threading import Event
+
+    from shelfmark.download import network
+
+logger = setup_logger(__name__)
+_RNG = random.SystemRandom()
+
+# Timeout constants (seconds)
+CONNECT_TIMEOUT = 10
+MAX_READ_TIMEOUT = 120
+READ_TIMEOUT_BUFFER = 15
+
+# Retry settings
+MAX_RETRY = 5
+BACKOFF_BASE = 1.0
+BACKOFF_CAP = 10.0
+
+
+def _coerce_config_str(value: object, default: str) -> str:
+    """Return a string config value or a safe default."""
+    if isinstance(value, str):
+        return value
+    return default
+
+
+def _coerce_timeout_ms(value: object, default: int) -> int:
+    """Return a positive timeout in milliseconds or the default."""
+    if isinstance(value, bool):
+        return default
+    if isinstance(value, int) and value > 0:
+        return value
+    return default
+
+
+def max_duration_seconds() -> float:
+    """Upper bound on how long get_bypassed_page() can take for one URL.
+
+    MAX_RETRY attempts at the configured read timeout, plus the exponential backoff waited
+    between them (jitter is < 1s per gap, counted as a full second to stay conservative).
+    Callers use this to declare a stall-detection grace; see shelfmark.download.activity.
+    """
+    bypasser_timeout = _coerce_timeout_ms(config.get("EXT_BYPASSER_TIMEOUT", 60000), 60000)
+    read_timeout = min((bypasser_timeout / 1000) + READ_TIMEOUT_BUFFER, MAX_READ_TIMEOUT)
+    backoff_total = sum(
+        min(BACKOFF_CAP, BACKOFF_BASE * (2 ** (attempt - 1))) + 1.0
+        for attempt in range(1, MAX_RETRY)
+    )
+    return MAX_RETRY * read_timeout + backoff_total
+
+
+def _fetch_via_bypasser(target_url: str) -> str | None:
+    """Make a single request to the external bypasser service. Returns HTML or None."""
+    raw_bypasser_url = _coerce_config_str(
+        config.get("EXT_BYPASSER_URL", "http://flaresolverr:8191"),
+        "http://flaresolverr:8191",
+    )
+    bypasser_path = _coerce_config_str(config.get("EXT_BYPASSER_PATH", "/v1"), "/v1")
+    bypasser_timeout = _coerce_timeout_ms(config.get("EXT_BYPASSER_TIMEOUT", 60000), 60000)
+
+    bypasser_url = normalize_http_url(raw_bypasser_url)
+    if not bypasser_url or not bypasser_path:
+        logger.error(
+            "External bypasser not configured. Check EXT_BYPASSER_URL and EXT_BYPASSER_PATH."
+        )
+        return None
+
+    read_timeout = min((bypasser_timeout / 1000) + READ_TIMEOUT_BUFFER, MAX_READ_TIMEOUT)
+
+    try:
+        response = requests.post(
+            f"{bypasser_url}{bypasser_path}",
+            headers={"Content-Type": "application/json"},
+            json={
+                "cmd": "request.get",
+                "url": target_url,
+                "maxTimeout": bypasser_timeout,
+            },
+            timeout=(CONNECT_TIMEOUT, read_timeout),
+            verify=get_ssl_verify(bypasser_url),
+        )
+        response.raise_for_status()
+        result = response.json()
+
+        status = result.get("status", "unknown")
+        message = result.get("message", "")
+        logger.debug("External bypasser response for '%s': %s - %s", target_url, status, message)
+
+        if status != "ok":
+            logger.warning(
+                "External bypasser failed for '%s': %s - %s",
+                target_url,
+                status,
+                message,
+            )
+            return None
+
+        solution = result.get("solution")
+        html = solution.get("response", "") if solution else ""
+
+        if not html:
+            logger.warning("External bypasser returned empty response for '%s'", target_url)
+            return None
+
+    except requests.exceptions.Timeout:
+        logger.warning(
+            "External bypasser timed out for '%s' (connect: %ss, read: %.0fs)",
+            target_url,
+            CONNECT_TIMEOUT,
+            read_timeout,
+        )
+    except requests.exceptions.RequestException as e:
+        logger.warning("External bypasser request failed for '%s': %s", target_url, e)
+    except (KeyError, TypeError, ValueError) as e:
+        logger.warning("External bypasser returned malformed response for '%s': %s", target_url, e)
+    else:
+        return html
+
+    return None
+
+
+def _check_cancelled(cancel_flag: Event | None, context: str) -> None:
+    """Check if operation was cancelled and raise exception if so."""
+    if cancel_flag and cancel_flag.is_set():
+        logger.info("External bypasser cancelled %s", context)
+        msg = "Bypass cancelled"
+        raise BypassCancelledError(msg)
+
+
+def _sleep_with_cancellation(seconds: float, cancel_flag: Event | None) -> None:
+    """Sleep for the specified duration, checking for cancellation each second."""
+    for _ in range(int(seconds)):
+        _check_cancelled(cancel_flag, "during backoff")
+        time.sleep(1)
+    remaining = seconds - int(seconds)
+    if remaining > 0:
+        time.sleep(remaining)
+
+
+def get_bypassed_page(
+    url: str,
+    selector: network.AAMirrorSelector | None = None,
+    cancel_flag: Event | None = None,
+) -> str | None:
+    """Fetch HTML via external bypasser with retries and mirror rotation."""
+    from shelfmark.download import network as network_module
+
+    sel = selector or network_module.AAMirrorSelector()
+
+    for attempt in range(1, MAX_RETRY + 1):
+        _check_cancelled(cancel_flag, "by user")
+
+        attempt_url = sel.rewrite(url)
+        result = _fetch_via_bypasser(attempt_url)
+        if result:
+            return result
+
+        if attempt == MAX_RETRY:
+            break
+
+        delay = min(BACKOFF_CAP, BACKOFF_BASE * (2 ** (attempt - 1))) + _RNG.random()
+        logger.info(
+            "External bypasser attempt %s/%s failed, retrying in %.1fs",
+            attempt,
+            MAX_RETRY,
+            delay,
+        )
+
+        _sleep_with_cancellation(delay, cancel_flag)
+
+        new_base, action = sel.next_mirror_or_rotate_dns()
+        if action in ("mirror", "dns") and new_base:
+            logger.info("Rotated %s for retry", action)
+
+    return None

shelfmark/bypass/fingerprint.py

@@ -0,0 +1,70 @@
+"""Browser fingerprint profile management for bypass stealth."""
+
+import random
+
+from shelfmark.core.logger import setup_logger
+
+logger = setup_logger(__name__)
+
+COMMON_RESOLUTIONS = [
+    (1920, 1080, 0.35),
+    (1366, 768, 0.18),
+    (1536, 864, 0.10),
+    (1440, 900, 0.08),
+    (1280, 720, 0.07),
+    (1600, 900, 0.06),
+    (1280, 800, 0.05),
+    (2560, 1440, 0.04),
+    (1680, 1050, 0.04),
+    (1920, 1200, 0.03),
+]
+
+# Current screen size (module-level singleton)
+_current_screen_size: tuple[int, int] | None = None
+_RNG = random.SystemRandom()
+
+
+def get_screen_size() -> tuple[int, int]:
+    """Return the current synthetic screen size, generating one if needed."""
+    global _current_screen_size
+    if _current_screen_size is None:
+        _current_screen_size = _generate_screen_size()
+        logger.debug(
+            "Generated initial screen size: %sx%s",
+            _current_screen_size[0],
+            _current_screen_size[1],
+        )
+    return _current_screen_size
+
+
+def rotate_screen_size() -> tuple[int, int]:
+    """Rotate to a new synthetic screen size and return it."""
+    global _current_screen_size
+    old_size = _current_screen_size
+    _current_screen_size = _generate_screen_size()
+    width, height = _current_screen_size
+
+    if old_size:
+        logger.info(
+            "Rotated screen size: %sx%s -> %sx%s",
+            old_size[0],
+            old_size[1],
+            width,
+            height,
+        )
+    else:
+        logger.info("Generated screen size: %sx%s", width, height)
+
+    return _current_screen_size
+
+
+def clear_screen_size() -> None:
+    """Clear the cached synthetic screen size."""
+    global _current_screen_size
+    _current_screen_size = None
+
+
+def _generate_screen_size() -> tuple[int, int]:
+    resolutions = [(w, h) for w, h, _ in COMMON_RESOLUTIONS]
+    weights = [weight for _, _, weight in COMMON_RESOLUTIONS]
+    return _RNG.choices(resolutions, weights=weights)[0]

shelfmark/config/__init__.py

@@ -0,0 +1 @@
+"""Configuration module - environment variables and settings."""

shelfmark/config/booklore_settings.py

@@ -0,0 +1,204 @@
+"""Helpers for Booklore settings validation, option loading, and connection tests."""
+
+from __future__ import annotations
+
+import hashlib
+from typing import Any
+
+from shelfmark.core.config import config
+from shelfmark.core.logger import setup_logger
+from shelfmark.download.outputs.booklore import (
+    BookloreConfig,
+    BookloreError,
+    booklore_list_libraries,
+    booklore_login,
+)
+
+logger = setup_logger(__name__)
+
+_BOOKLORE_OPTIONS_CACHE: dict[str, Any] = {
+    "key": None,
+    "library_options": [],
+    "path_options": [],
+}
+
+
+def _get_booklore_cache_key(base_url: str, username: str, password: str) -> str:
+    return f"{base_url}|{username}|{hashlib.sha256(password.encode()).hexdigest()}"
+
+
+def _get_booklore_select_options(
+    base_url: str,
+    username: str,
+    password: str,
+) -> tuple[list[dict[str, Any]], list[dict[str, Any]]]:
+    # library_id/path_id are not used for login/library listing
+    booklore_config = BookloreConfig(
+        base_url=base_url.rstrip("/"),
+        username=username,
+        password=password,
+        library_id=1,
+        path_id=1,
+        verify_tls=True,
+        refresh_after_upload=True,
+    )
+
+    token = booklore_login(booklore_config)
+    libraries = booklore_list_libraries(booklore_config, token) or []
+    logger.debug("Booklore libraries response: %s", libraries)
+
+    library_options: list[dict[str, Any]] = []
+    path_options: list[dict[str, Any]] = []
+
+    for library in libraries:
+        if not isinstance(library, dict):
+            continue
+
+        library_id = library.get("id")
+        if library_id is None:
+            continue
+
+        library_name = str(library.get("name") or f"Library {library_id}")
+        library_id_str = str(library_id)
+
+        library_options.append({"value": library_id_str, "label": library_name})
+
+        paths = library.get("paths") or []
+        if not isinstance(paths, list):
+            continue
+
+        for path in paths:
+            if not isinstance(path, dict):
+                continue
+
+            path_id = path.get("id")
+            if path_id is None:
+                continue
+
+            path_label = str(path.get("path") or f"Path {path_id}")
+            path_options.append(
+                {
+                    "value": str(path_id),
+                    "label": f"{library_name}: {path_label}",
+                    "childOf": library_id_str,
+                }
+            )
+
+    logger.debug(
+        "Booklore options built: libraries=%d paths=%d",
+        len(library_options),
+        len(path_options),
+    )
+
+    cache_key = _get_booklore_cache_key(base_url, username, password)
+    _BOOKLORE_OPTIONS_CACHE.update(
+        {
+            "key": cache_key,
+            "library_options": library_options,
+            "path_options": path_options,
+        }
+    )
+
+    return library_options, path_options
+
+
+def _get_booklore_cached_options(
+    base_url: str,
+    username: str,
+    password: str,
+) -> tuple[list[dict[str, Any]], list[dict[str, Any]]]:
+    cache_key = _get_booklore_cache_key(base_url, username, password)
+    if _BOOKLORE_OPTIONS_CACHE.get("key") == cache_key:
+        return (
+            _BOOKLORE_OPTIONS_CACHE.get("library_options", []),
+            _BOOKLORE_OPTIONS_CACHE.get("path_options", []),
+        )
+
+    return _get_booklore_select_options(base_url, username, password)
+
+
+def get_booklore_library_options() -> list[dict[str, Any]]:
+    """Build Booklore library options dynamically from config."""
+    if config.get("BOOKS_OUTPUT_MODE", "folder") != "booklore":
+        return []
+
+    base_url = str(config.get("BOOKLORE_HOST", "") or "").strip().rstrip("/")
+    username = str(config.get("BOOKLORE_USERNAME", "") or "").strip()
+    password = str(config.get("BOOKLORE_PASSWORD", "") or "")
+
+    if not base_url or not username or not password:
+        return []
+
+    cache_key = _get_booklore_cache_key(base_url, username, password)
+
+    try:
+        library_options, _ = _get_booklore_cached_options(base_url, username, password)
+    except Exception:
+        logger.exception("Failed to fetch Booklore libraries")
+        if _BOOKLORE_OPTIONS_CACHE.get("key") == cache_key:
+            return _BOOKLORE_OPTIONS_CACHE.get("library_options", [])
+        return []
+    else:
+        return library_options
+
+
+def get_booklore_path_options() -> list[dict[str, Any]]:
+    """Build Booklore path options dynamically from config."""
+    if config.get("BOOKS_OUTPUT_MODE", "folder") != "booklore":
+        return []
+
+    base_url = str(config.get("BOOKLORE_HOST", "") or "").strip().rstrip("/")
+    username = str(config.get("BOOKLORE_USERNAME", "") or "").strip()
+    password = str(config.get("BOOKLORE_PASSWORD", "") or "")
+
+    if not base_url or not username or not password:
+        return []
+
+    cache_key = _get_booklore_cache_key(base_url, username, password)
+
+    try:
+        _, path_options = _get_booklore_cached_options(base_url, username, password)
+    except Exception:
+        logger.exception("Failed to fetch Booklore paths")
+        if _BOOKLORE_OPTIONS_CACHE.get("key") == cache_key:
+            return _BOOKLORE_OPTIONS_CACHE.get("path_options", [])
+        return []
+    else:
+        return path_options
+
+
+def check_booklore_connection(
+    current_values: dict[str, Any] | None = None,
+) -> dict[str, Any]:
+    """Test the Booklore connection using current form values."""
+    current_values = current_values or {}
+
+    def _get_value(key: str, default: object = None) -> object:
+        value = current_values.get(key)
+        if value not in (None, ""):
+            return value
+        if default is None:
+            return config.get(key)
+        return config.get(key, default)
+
+    base_url = str(_get_value("BOOKLORE_HOST", "") or "").strip().rstrip("/")
+    username = str(_get_value("BOOKLORE_USERNAME", "") or "").strip()
+    password = str(_get_value("BOOKLORE_PASSWORD", "") or "")
+
+    if not base_url:
+        return {"success": False, "message": "Grimmory URL is required"}
+    if not username:
+        return {"success": False, "message": "Grimmory username is required"}
+    if not password:
+        return {"success": False, "message": "Grimmory password is required"}
+
+    try:
+        library_options, _ = _get_booklore_select_options(base_url, username, password)
+    except BookloreError as exc:
+        return {"success": False, "message": str(exc)}
+    else:
+        message = "Connected to Grimmory"
+        if library_options:
+            message = f"Connected to Grimmory ({len(library_options)} libraries)"
+
+        return {"success": True, "message": message}

shelfmark/config/download_settings_handlers.py

@@ -0,0 +1,110 @@
+from __future__ import annotations
+
+import re
+from pathlib import Path
+from typing import Any
+
+_USER_PLACEHOLDER_PATTERN = re.compile(r"\{user\}", re.IGNORECASE)
+
+
+def _get_download_setting_value(
+    current_values: dict[str, Any] | None,
+    key: str,
+    *,
+    default: object = None,
+) -> object:
+    """Read a downloads setting from unsaved form values first, then persisted config."""
+    from shelfmark.core.config import config
+
+    current_values = current_values or {}
+    if key in current_values:
+        return current_values[key]
+    if default is None:
+        return config.get(key)
+    return config.get(key, default)
+
+
+def _resolve_destination_test_path(
+    configured_path: str,
+) -> tuple[Path, str | None]:
+    """Resolve a safe path to validate for destination test actions."""
+    stripped_path = configured_path.strip()
+
+    if not _USER_PLACEHOLDER_PATTERN.search(stripped_path):
+        return Path(stripped_path), None
+
+    base_prefix = _USER_PLACEHOLDER_PATTERN.split(stripped_path, maxsplit=1)[0].rstrip("/")
+    if not base_prefix and not stripped_path.startswith("/"):
+        return Path(stripped_path), None
+
+    base_path = base_prefix or "/"
+    return Path(base_path), (
+        f" (tested base path {base_path} from configured template {stripped_path})"
+    )
+
+
+def _test_folder_destination(
+    *,
+    current_values: dict[str, Any] | None = None,
+    is_audiobook: bool,
+) -> dict[str, Any]:
+    """Validate a folder destination using current form values."""
+    from shelfmark.download.postprocess.destination import validate_destination
+
+    destination_value = _get_download_setting_value(
+        current_values,
+        "DESTINATION",
+        default="/books",
+    )
+    destination = str(destination_value or "").strip()
+
+    label = "Books destination"
+    message_suffix = ""
+
+    if is_audiobook:
+        audiobook_value = _get_download_setting_value(
+            current_values,
+            "DESTINATION_AUDIOBOOK",
+            default="",
+        )
+        audiobook_destination = str(audiobook_value or "").strip()
+        if audiobook_destination:
+            destination = audiobook_destination
+            label = "Audiobook destination"
+        else:
+            label = "Audiobook destination"
+            message_suffix = " (using the Books destination)"
+
+    if not destination:
+        return {"success": False, "message": f"{label} is required"}
+
+    test_path, path_message = _resolve_destination_test_path(destination)
+    if path_message:
+        message_suffix += path_message
+
+    errors: list[str] = []
+
+    def _status_callback(status: str, message: str | None) -> None:
+        if status == "error" and message:
+            errors.append(message)
+
+    if not validate_destination(test_path, _status_callback):
+        message = errors[-1] if errors else f"Cannot access destination: {test_path}"
+        if message_suffix:
+            message = f"{message}{message_suffix}"
+        return {"success": False, "message": message}
+
+    return {
+        "success": True,
+        "message": f"{label} is writable: {test_path}{message_suffix}",
+    }
+
+
+def check_books_destination(current_values: dict[str, Any] | None = None) -> dict[str, Any]:
+    """Validate the configured books destination."""
+    return _test_folder_destination(current_values=current_values, is_audiobook=False)
+
+
+def check_audiobook_destination(current_values: dict[str, Any] | None = None) -> dict[str, Any]:
+    """Validate the configured audiobook destination."""
+    return _test_folder_destination(current_values=current_values, is_audiobook=True)

shelfmark/config/email_settings.py

@@ -0,0 +1,50 @@
+"""Helpers for email settings validation and SMTP connection tests."""
+
+from __future__ import annotations
+
+import smtplib
+from typing import Any
+
+from shelfmark.core.config import config
+from shelfmark.download.outputs.email import (
+    EmailOutputError,
+    build_email_smtp_config,
+    test_smtp_connection,
+)
+
+
+def check_email_connection(
+    current_values: dict[str, Any] | None = None,
+) -> dict[str, Any]:
+    """Test SMTP connectivity using current form values (including unsaved changes)."""
+    current_values = current_values or {}
+
+    def _get_value(key: str, default: object = None) -> object:
+        value = current_values.get(key)
+        if value not in (None, ""):
+            return value
+        if default is None:
+            return config.get(key)
+        return config.get(key, default)
+
+    settings = {
+        "EMAIL_SMTP_HOST": _get_value("EMAIL_SMTP_HOST", ""),
+        "EMAIL_SMTP_PORT": _get_value("EMAIL_SMTP_PORT", 587),
+        "EMAIL_SMTP_SECURITY": _get_value("EMAIL_SMTP_SECURITY", "starttls"),
+        "EMAIL_SMTP_USERNAME": _get_value("EMAIL_SMTP_USERNAME", ""),
+        "EMAIL_SMTP_PASSWORD": _get_value("EMAIL_SMTP_PASSWORD", ""),
+        "EMAIL_FROM": _get_value("EMAIL_FROM", ""),
+        "EMAIL_SUBJECT_TEMPLATE": _get_value("EMAIL_SUBJECT_TEMPLATE", "{Title}"),
+        "EMAIL_SMTP_TIMEOUT_SECONDS": _get_value("EMAIL_SMTP_TIMEOUT_SECONDS", 60),
+        "EMAIL_ALLOW_UNVERIFIED_TLS": _get_value("EMAIL_ALLOW_UNVERIFIED_TLS", default=False),
+    }
+
+    try:
+        smtp_config = build_email_smtp_config(settings)
+        test_smtp_connection(smtp_config)
+    except EmailOutputError as exc:
+        return {"success": False, "message": str(exc)}
+    except (OSError, smtplib.SMTPException) as exc:
+        return {"success": False, "message": f"SMTP test failed: {exc}"}
+    else:
+        return {"success": True, "message": "Connected to SMTP server"}

shelfmark/config/env.py

@@ -0,0 +1,214 @@
+"""Bootstrap environment variables. No local dependencies - import first."""
+
+import json
+import os
+import shutil
+import tempfile
+from pathlib import Path
+
+LOG_LEVELS = ("DEBUG", "INFO", "WARNING", "ERROR", "CRITICAL")
+
+
+def string_to_bool(s: str) -> bool:
+    """Convert string to boolean."""
+    return s.lower() in ["true", "yes", "1", "y"]
+
+
+def _read_advanced_config(key: str) -> object | None:
+    """Read a key from the advanced settings file (import-time safe)."""
+    config_dir = Path(os.getenv("CONFIG_DIR", "/config"))
+    config_file = config_dir / "plugins" / "advanced.json"
+
+    if config_file.exists():
+        try:
+            with config_file.open() as f:
+                config = json.load(f)
+                if key in config:
+                    return config[key]
+        except json.JSONDecodeError, OSError:
+            pass
+
+    return None
+
+
+def _read_debug_from_config() -> bool:
+    """Read DEBUG from env var or config file (import-time safe)."""
+    env_debug = os.environ.get("DEBUG")
+    if env_debug is not None:
+        return string_to_bool(env_debug)
+
+    value = _read_advanced_config("DEBUG")
+    if value is not None:
+        return bool(value)
+
+    return False
+
+
+def normalize_log_level(raw: str | None) -> str:
+    """Normalize a log level name, falling back to INFO when unrecognized."""
+    if raw is None:
+        return "INFO"
+
+    normalized = raw.strip().upper()
+    # "WARN" is a logging alias, but gunicorn only accepts "warning".
+    if normalized == "WARN":
+        normalized = "WARNING"
+
+    if normalized not in LOG_LEVELS:
+        return "INFO"
+
+    return normalized
+
+
+def _read_log_level_from_config(debug: bool) -> str:
+    """Resolve the app log level from DEBUG, env var, or config file.
+
+    DEBUG wins when enabled, mirroring how entrypoint.sh picks gunicorn's level.
+    Otherwise LOG_LEVEL is read from the env var, then the settings file, and
+    falls back to INFO when unset or unrecognized.
+    """
+    if debug:
+        return "DEBUG"
+
+    raw = os.environ.get("LOG_LEVEL")
+    if raw is None:
+        value = _read_advanced_config("LOG_LEVEL")
+        raw = value if isinstance(value, str) else None
+
+    return normalize_log_level(raw)
+
+
+def _is_sqlite_file(path: Path) -> bool:
+    """Check if a file is a valid SQLite database by reading magic bytes."""
+    try:
+        with path.open("rb") as f:
+            header = f.read(16)
+            return header[:16] == b"SQLite format 3\x00"
+    except OSError, PermissionError:
+        return False
+
+
+def _resolve_cwa_db_path() -> Path | None:
+    """Resolve CWA database path from env var or default location."""
+    env_path = os.getenv("CWA_DB_PATH")
+    if env_path:
+        path = Path(env_path)
+        if path.exists() and path.is_file() and _is_sqlite_file(path):
+            return path
+
+    # Check default mount path
+    default_path = Path("/auth/app.db")
+    if default_path.exists() and default_path.is_file() and _is_sqlite_file(default_path):
+        return default_path
+
+    return None
+
+
+def _is_config_dir_writable() -> bool:
+    """Check if the config directory exists and is writable."""
+    try:
+        if not CONFIG_DIR.exists() or not CONFIG_DIR.is_dir():
+            return False
+        test_file = CONFIG_DIR / ".write_test"
+        test_file.touch()
+        test_file.unlink()
+    except OSError, PermissionError:
+        return False
+    else:
+        return True
+
+
+def is_covers_cache_enabled() -> bool:
+    """Check if cover caching is enabled (requires setting + writable config dir)."""
+    from shelfmark.core.config import config
+
+    setting_enabled = config.get("COVERS_CACHE_ENABLED", True)
+    if isinstance(setting_enabled, str):
+        return string_to_bool(setting_enabled) and _is_config_dir_writable()
+    return bool(setting_enabled) and _is_config_dir_writable()
+
+
+# =============================================================================
+# Bootstrap paths - needed before settings registry is available
+# =============================================================================
+
+CONFIG_DIR = Path(os.getenv("CONFIG_DIR", "/config"))
+LOG_ROOT = Path(os.getenv("LOG_ROOT", "/var/log/"))
+LOG_DIR = LOG_ROOT / "shelfmark"
+LOG_FILE = LOG_DIR / "shelfmark.log"
+TMP_DIR = Path(os.getenv("TMP_DIR", (Path(tempfile.gettempdir()) / "shelfmark").as_posix()))
+INGEST_DIR = Path(os.getenv("INGEST_DIR", "/books"))
+
+
+# =============================================================================
+# Logger configuration - needed before settings registry is available
+# =============================================================================
+
+DEBUG = _read_debug_from_config()
+LOG_LEVEL = _read_log_level_from_config(DEBUG)
+ENABLE_LOGGING = string_to_bool(os.getenv("ENABLE_LOGGING", "true"))
+
+
+# =============================================================================
+# Flask configuration - needed before app starts
+# =============================================================================
+
+FLASK_HOST = os.getenv("FLASK_HOST", "0.0.0.0")
+FLASK_PORT = int(os.getenv("FLASK_PORT", "8084"))
+
+
+# =============================================================================
+# Authentication
+# =============================================================================
+
+SESSION_COOKIE_SECURE_ENV = os.getenv("SESSION_COOKIE_SECURE", "false")
+SESSION_COOKIE_NAME = "shelfmark_session"
+CWA_DB_PATH = _resolve_cwa_db_path()
+HIDE_LOCAL_AUTH = string_to_bool(os.getenv("HIDE_LOCAL_AUTH", "false"))
+DISABLE_LOCAL_AUTH = string_to_bool(os.getenv("DISABLE_LOCAL_AUTH", "false"))
+OIDC_AUTO_REDIRECT = string_to_bool(os.getenv("OIDC_AUTO_REDIRECT", "false"))
+
+
+# =============================================================================
+# Version information from Docker build
+# =============================================================================
+
+BUILD_VERSION = os.getenv("BUILD_VERSION", "N/A")
+RELEASE_VERSION = os.getenv("RELEASE_VERSION", "N/A")
+
+
+# =============================================================================
+# Capability detection - runtime checks, not user-configurable
+# =============================================================================
+
+DOCKERMODE = string_to_bool(os.getenv("DOCKERMODE", "false"))
+TOR_VARIANT_AVAILABLE = shutil.which("tor") is not None
+USING_TOR = string_to_bool(os.getenv("USING_TOR", "false"))
+
+
+# =============================================================================
+# Onboarding
+# =============================================================================
+
+# Set to false to skip the onboarding wizard entirely (useful for ephemeral storage)
+ONBOARDING = string_to_bool(os.getenv("ONBOARDING", "true"))
+
+
+# =============================================================================
+# Debug/development settings
+# =============================================================================
+
+# Debug: skip specific download sources for testing fallback chains
+# Comma-separated values: aa-fast, aa-slow-nowait, aa-slow-wait, libgen, zlib, welib
+_DEBUG_SKIP_SOURCES_RAW = os.getenv("DEBUG_SKIP_SOURCES", "").strip().lower()
+DEBUG_SKIP_SOURCES = {s.strip() for s in _DEBUG_SKIP_SOURCES_RAW.split(",") if s.strip()}
+
+
+# =============================================================================
+# Legacy migration support - will be removed in future version
+# =============================================================================
+
+# Legacy welib settings - replaced by SOURCE_PRIORITY OrderableListField
+# Kept for migration: if set, used to build initial SOURCE_PRIORITY config
+_LEGACY_PRIORITIZE_WELIB = string_to_bool(os.getenv("PRIORITIZE_WELIB", "false"))
+_LEGACY_ALLOW_USE_WELIB = string_to_bool(os.getenv("ALLOW_USE_WELIB", "true"))

shelfmark/config/migrations.py

@@ -0,0 +1,201 @@
+"""Configuration migration helpers."""
+
+from __future__ import annotations
+
+import json
+from pathlib import Path
+from typing import TYPE_CHECKING, Any, Protocol
+
+if TYPE_CHECKING:
+    from collections.abc import Callable, Sequence
+    from os import PathLike
+
+_DEPRECATED_SETTINGS_RESTRICTION_KEYS = (
+    "PROXY_AUTH_RESTRICT_SETTINGS_TO_ADMIN",
+    "CWA_RESTRICT_SETTINGS_TO_ADMIN",
+    "RESTRICT_SETTINGS_TO_ADMIN",
+)
+
+# The audiobook format list shipped as the default until the format sets were unified.
+# It only covered m4b/mp3, so FLAC/OPUS/OGG/M4A releases were dropped from search results
+# and rejected after download - and the wider default alone would never reach existing
+# installs, because initialize_default_configs() only writes defaults when the config
+# file does not exist yet.
+_LEGACY_AUDIOBOOK_FORMATS_DEFAULT = ("m4b", "mp3")
+
+
+class MigrationLogger(Protocol):
+    """Logger surface used by config migration helpers."""
+
+    def info(self, msg: str, *args: object) -> object: ...
+
+    def debug(self, msg: str, *args: object) -> object: ...
+
+    def exception(self, msg: str, *args: object) -> object: ...
+
+
+def _as_bool(value: object) -> bool:
+    if isinstance(value, bool):
+        return value
+    if isinstance(value, str):
+        return value.strip().lower() in {"1", "true", "yes", "on"}
+    return bool(value)
+
+
+def _pick_legacy_settings_restriction(config: dict[str, Any]) -> bool | None:
+    """Pick the best legacy admin-restriction value to migrate."""
+    auth_method = str(config.get("AUTH_METHOD", "")).strip().lower()
+
+    if auth_method == "proxy" and "PROXY_AUTH_RESTRICT_SETTINGS_TO_ADMIN" in config:
+        return _as_bool(config.get("PROXY_AUTH_RESTRICT_SETTINGS_TO_ADMIN"))
+
+    if auth_method == "cwa" and "CWA_RESTRICT_SETTINGS_TO_ADMIN" in config:
+        return _as_bool(config.get("CWA_RESTRICT_SETTINGS_TO_ADMIN"))
+
+    if "RESTRICT_SETTINGS_TO_ADMIN" in config:
+        return _as_bool(config.get("RESTRICT_SETTINGS_TO_ADMIN"))
+
+    if "PROXY_AUTH_RESTRICT_SETTINGS_TO_ADMIN" in config:
+        return _as_bool(config.get("PROXY_AUTH_RESTRICT_SETTINGS_TO_ADMIN"))
+
+    if "CWA_RESTRICT_SETTINGS_TO_ADMIN" in config:
+        return _as_bool(config.get("CWA_RESTRICT_SETTINGS_TO_ADMIN"))
+
+    return None
+
+
+def migrate_audiobook_formats(
+    *,
+    load_general_config: Callable[[], dict[str, Any]],
+    save_general_config: Callable[[dict[str, Any]], None],
+    widened_formats: Sequence[str],
+    logger: MigrationLogger,
+) -> None:
+    """Widen an untouched audiobook format list to the current, fuller default.
+
+    Only a list that still matches the old default exactly is rewritten. Any other value
+    means someone chose it deliberately, and a migration that "helpfully" re-enabled
+    formats a user had turned off would be worse than leaving them on the narrow list.
+    """
+    try:
+        config = load_general_config()
+
+        if "SUPPORTED_AUDIOBOOK_FORMATS" not in config:
+            # Nothing persisted, so the field default already applies.
+            logger.debug("No persisted audiobook formats - the current default applies")
+            return
+
+        current = config.get("SUPPORTED_AUDIOBOOK_FORMATS")
+        if not isinstance(current, list):
+            return
+
+        normalized = {str(fmt).strip().lower() for fmt in current if str(fmt).strip()}
+        if normalized != set(_LEGACY_AUDIOBOOK_FORMATS_DEFAULT):
+            logger.debug(
+                "Audiobook formats were customized (%s) - left unchanged", sorted(normalized)
+            )
+            return
+
+        save_general_config({"SUPPORTED_AUDIOBOOK_FORMATS": list(widened_formats)})
+        logger.info(
+            "Widened audiobook formats from the legacy default %s to %s",
+            list(_LEGACY_AUDIOBOOK_FORMATS_DEFAULT),
+            list(widened_formats),
+        )
+
+    except FileNotFoundError:
+        logger.debug("No existing general config file found - nothing to migrate")
+    except Exception:
+        logger.exception("Failed to migrate audiobook formats")
+
+
+def migrate_security_settings(
+    *,
+    load_security_config: Callable[[], dict[str, Any]],
+    load_users_config: Callable[[], dict[str, Any]],
+    save_users_config: Callable[[dict[str, Any]], None],
+    ensure_config_dir: Callable[[], None],
+    get_config_path: Callable[[], str | PathLike[str]],
+    sync_builtin_admin_user: Callable[[str, str], None],
+    logger: MigrationLogger,
+) -> None:
+    """Migrate legacy security keys and sync builtin admin credentials."""
+    try:
+        config = load_security_config()
+        users_config = load_users_config()
+        migrated_security = False
+        migrated_users = False
+
+        if "USE_CWA_AUTH" in config:
+            old_value = config.pop("USE_CWA_AUTH")
+            if "AUTH_METHOD" not in config:
+                if old_value:
+                    config["AUTH_METHOD"] = "cwa"
+                    logger.info("Migrated USE_CWA_AUTH=True to AUTH_METHOD='cwa'")
+                elif config.get("BUILTIN_USERNAME") and config.get("BUILTIN_PASSWORD_HASH"):
+                    config["AUTH_METHOD"] = "builtin"
+                    logger.info("Migrated USE_CWA_AUTH=False to AUTH_METHOD='builtin'")
+                else:
+                    config["AUTH_METHOD"] = "none"
+                    logger.info("Migrated USE_CWA_AUTH=False to AUTH_METHOD='none'")
+                migrated_security = True
+            else:
+                logger.info("Removed deprecated USE_CWA_AUTH setting (AUTH_METHOD already exists)")
+                migrated_security = True
+
+        # Backfill AUTH_METHOD for configs that have builtin credentials but
+        # were never migrated from USE_CWA_AUTH (e.g. dev builds that predated
+        # the AUTH_METHOD field).
+        if (
+            "AUTH_METHOD" not in config
+            and config.get("BUILTIN_USERNAME")
+            and config.get("BUILTIN_PASSWORD_HASH")
+        ):
+            config["AUTH_METHOD"] = "builtin"
+            migrated_security = True
+            logger.info(
+                "Backfilled AUTH_METHOD='builtin' from legacy "
+                "BUILTIN_USERNAME/BUILTIN_PASSWORD_HASH credentials"
+            )
+
+        if "RESTRICT_SETTINGS_TO_ADMIN" not in users_config:
+            legacy_restrict = _pick_legacy_settings_restriction(config)
+            if legacy_restrict is not None:
+                save_users_config({"RESTRICT_SETTINGS_TO_ADMIN": legacy_restrict})
+                migrated_users = True
+                logger.info(
+                    "Migrated legacy settings-admin restriction to users.RESTRICT_SETTINGS_TO_ADMIN=%s",
+                    legacy_restrict,
+                )
+
+        for deprecated_key in _DEPRECATED_SETTINGS_RESTRICTION_KEYS:
+            if deprecated_key in config:
+                config.pop(deprecated_key, None)
+                migrated_security = True
+                logger.info("Removed deprecated security setting: %s", deprecated_key)
+
+        try:
+            sync_builtin_admin_user(
+                config.get("BUILTIN_USERNAME", ""),
+                config.get("BUILTIN_PASSWORD_HASH", ""),
+            )
+        except Exception:
+            logger.exception(
+                "Failed to sync builtin credentials to users database during migration"
+            )
+
+        if migrated_security:
+            ensure_config_dir()
+            config_path = Path(get_config_path())
+            with config_path.open("w") as f:
+                json.dump(config, f, indent=2)
+            logger.info("Security settings migration completed successfully")
+        elif migrated_users:
+            logger.info("Users settings migration completed successfully")
+        else:
+            logger.debug("No security settings migration needed")
+
+    except FileNotFoundError:
+        logger.debug("No existing security config file found - nothing to migrate")
+    except Exception:
+        logger.exception("Failed to migrate security settings")

shelfmark/config/notifications_settings.py

@@ -0,0 +1,341 @@
+"""Notifications settings tab registration."""
+
+from __future__ import annotations
+
+import re
+from typing import Any
+from urllib.parse import urlsplit
+
+from shelfmark.core.config import config as app_config
+from shelfmark.core.notifications import NotificationEvent, send_test_notification
+from shelfmark.core.settings_registry import (
+    ActionButton,
+    HeadingField,
+    SettingsField,
+    TableField,
+    load_config_file,
+    register_on_save,
+    register_settings,
+)
+
+_URL_SCHEME_RE = re.compile(r"^[a-zA-Z][a-zA-Z0-9+.-]*$")
+
+_ROUTE_EVENT_ALL = "all"
+_ADMIN_EVENT_OPTIONS = [
+    {"value": NotificationEvent.REQUEST_CREATED.value, "label": "New request submitted"},
+    {"value": NotificationEvent.REQUEST_FULFILLED.value, "label": "Request approved"},
+    {"value": NotificationEvent.REQUEST_REJECTED.value, "label": "Request rejected"},
+    {"value": NotificationEvent.DOWNLOAD_COMPLETE.value, "label": "Download complete"},
+    {"value": NotificationEvent.DOWNLOAD_FAILED.value, "label": "Download failed"},
+]
+_ROUTE_EVENT_OPTIONS = [
+    {"value": _ROUTE_EVENT_ALL, "label": "All"},
+    *_ADMIN_EVENT_OPTIONS,
+]
+_ROUTE_EVENT_ORDER = [option["value"] for option in _ROUTE_EVENT_OPTIONS]
+_ROUTE_EVENT_INDEX = {event: index for index, event in enumerate(_ROUTE_EVENT_ORDER)}
+_ALLOWED_ROUTE_EVENTS = set(_ROUTE_EVENT_ORDER)
+
+_DEFAULT_ROUTE_ROWS = [{"event": [_ROUTE_EVENT_ALL], "url": ""}]
+
+
+def _looks_like_apprise_url(url: str) -> bool:
+    split = urlsplit(url)
+    if not split.scheme:
+        return False
+    if not _URL_SCHEME_RE.match(split.scheme):
+        return False
+    return " " not in url
+
+
+def _coerce_route_rows(value: Any) -> list[dict[str, Any]]:
+    if value is None:
+        return []
+    if isinstance(value, list):
+        return [row for row in value if isinstance(row, dict)]
+    if isinstance(value, dict):
+        return [value]
+    return []
+
+
+def _coerce_route_event_values(value: Any) -> list[Any]:
+    if isinstance(value, list):
+        return value
+    if isinstance(value, (tuple, set)):
+        return list(value)
+    return [value]
+
+
+def _normalize_route_events(value: Any) -> list[str]:
+    normalized: list[str] = []
+    seen: set[str] = set()
+
+    for raw_event in _coerce_route_event_values(value):
+        event = str(raw_event or "").strip().lower()
+        if not event or event not in _ALLOWED_ROUTE_EVENTS:
+            continue
+        if event in seen:
+            continue
+        seen.add(event)
+        normalized.append(event)
+
+    if _ROUTE_EVENT_ALL in seen:
+        return [_ROUTE_EVENT_ALL]
+
+    return sorted(normalized, key=lambda event: _ROUTE_EVENT_INDEX[event])
+
+
+def _normalize_routes(value: Any) -> list[dict[str, Any]]:
+    normalized: list[dict[str, Any]] = []
+    seen: set[tuple[tuple[str, ...], str]] = set()
+
+    for row in _coerce_route_rows(value):
+        events = _normalize_route_events(row.get("event"))
+        if not events:
+            continue
+
+        url = str(row.get("url") or "").strip()
+        key = (tuple(events), url)
+        if key in seen:
+            continue
+        seen.add(key)
+
+        normalized.append({"event": events, "url": url})
+
+    return normalized
+
+
+def _count_invalid_route_events(value: Any) -> int:
+    invalid = 0
+    for row in _coerce_route_rows(value):
+        raw_events = _coerce_route_event_values(row.get("event"))
+        if not raw_events:
+            invalid += 1
+            continue
+
+        for raw_event in raw_events:
+            event = str(raw_event or "").strip().lower()
+            if not event or event not in _ALLOWED_ROUTE_EVENTS:
+                invalid += 1
+    return invalid
+
+
+def _count_invalid_route_urls(routes: list[dict[str, Any]]) -> int:
+    return sum(1 for row in routes if row["url"] and not _looks_like_apprise_url(row["url"]))
+
+
+def _ensure_default_route_row(routes: list[dict[str, Any]]) -> list[dict[str, Any]]:
+    return routes or [dict(row) for row in _DEFAULT_ROUTE_ROWS]
+
+
+def _extract_unique_route_urls(routes: list[dict[str, Any]]) -> list[str]:
+    urls: list[str] = []
+    seen: set[str] = set()
+    for row in routes:
+        url = row.get("url", "")
+        if not url:
+            continue
+        if url in seen:
+            continue
+        seen.add(url)
+        urls.append(url)
+    return urls
+
+
+def build_notification_test_result(routes_input: Any, *, scope_label: str) -> dict[str, Any]:
+    """Validate routes and return a test-notification result payload."""
+    invalid_event_count = _count_invalid_route_events(routes_input)
+    if invalid_event_count:
+        return {
+            "success": False,
+            "message": (
+                f"Found {invalid_event_count} invalid {scope_label} notification route event value(s). "
+                "Fix route events before running a test."
+            ),
+        }
+
+    normalized_routes = _normalize_routes(routes_input)
+    invalid_url_count = _count_invalid_route_urls(normalized_routes)
+    if invalid_url_count:
+        return {
+            "success": False,
+            "message": (
+                f"Found {invalid_url_count} invalid {scope_label} notification URL(s). "
+                "Fix route URLs before running a test."
+            ),
+        }
+
+    urls = _extract_unique_route_urls(normalized_routes)
+    if not urls:
+        return {
+            "success": False,
+            "message": f"Add at least one {scope_label} notification URL route first.",
+        }
+
+    return send_test_notification(urls)
+
+
+def normalize_notification_routes(value: Any) -> list[dict[str, Any]]:
+    """Normalize route table rows for notification preferences."""
+    return _normalize_routes(value)
+
+
+def is_valid_notification_url(url: str) -> bool:
+    """Shared URL validation for notifications preferences."""
+    return _looks_like_apprise_url(url)
+
+
+def _on_save_notifications(values: dict[str, Any]) -> dict[str, Any]:
+    existing = load_config_file("notifications")
+    effective: dict[str, Any] = dict(existing)
+    effective.update(values)
+
+    admin_routes_input = effective.get("ADMIN_NOTIFICATION_ROUTES", [])
+    invalid_admin_event_count = _count_invalid_route_events(admin_routes_input)
+    if invalid_admin_event_count:
+        return {
+            "error": True,
+            "message": (
+                f"Found {invalid_admin_event_count} invalid global notification route event value(s)."
+            ),
+            "values": values,
+        }
+
+    normalized_admin_routes = _normalize_routes(admin_routes_input)
+    invalid_admin_url_count = _count_invalid_route_urls(normalized_admin_routes)
+    if invalid_admin_url_count:
+        return {
+            "error": True,
+            "message": (
+                f"Found {invalid_admin_url_count} invalid global notification URL(s). "
+                "Use URL values with a valid scheme, e.g. discord://... or ntfys://..."
+            ),
+            "values": values,
+        }
+
+    user_routes_input = effective.get("USER_NOTIFICATION_ROUTES", [])
+    invalid_user_event_count = _count_invalid_route_events(user_routes_input)
+    if invalid_user_event_count:
+        return {
+            "error": True,
+            "message": (
+                f"Found {invalid_user_event_count} invalid personal notification route event value(s)."
+            ),
+            "values": values,
+        }
+
+    normalized_user_routes = _normalize_routes(user_routes_input)
+    invalid_user_url_count = _count_invalid_route_urls(normalized_user_routes)
+    if invalid_user_url_count:
+        return {
+            "error": True,
+            "message": (
+                f"Found {invalid_user_url_count} invalid personal notification URL(s). "
+                "Use URL values with a valid scheme, e.g. discord://... or ntfys://..."
+            ),
+            "values": values,
+        }
+
+    admin_routes_touched = "ADMIN_NOTIFICATION_ROUTES" in values
+    if admin_routes_touched:
+        values["ADMIN_NOTIFICATION_ROUTES"] = _ensure_default_route_row(normalized_admin_routes)
+
+    user_routes_touched = "USER_NOTIFICATION_ROUTES" in values
+    if user_routes_touched:
+        values["USER_NOTIFICATION_ROUTES"] = _ensure_default_route_row(normalized_user_routes)
+
+    return {"error": False, "values": values}
+
+
+def _test_admin_notification_action(current_values: dict[str, Any]) -> dict[str, Any]:
+    effective: dict[str, Any] = {
+        "ADMIN_NOTIFICATION_ROUTES": app_config.get("ADMIN_NOTIFICATION_ROUTES", []),
+    }
+    if isinstance(current_values, dict):
+        effective.update(current_values)
+
+    routes_input = effective.get("ADMIN_NOTIFICATION_ROUTES", [])
+    return build_notification_test_result(routes_input, scope_label="global")
+
+
+register_on_save("notifications", _on_save_notifications)
+
+
+@register_settings("notifications", "Notifications", icon="bell", order=7)
+def notifications_settings() -> list[SettingsField]:
+    """Global notifications settings."""
+    return [
+        HeadingField(
+            key="notifications_heading",
+            title="Global Notifications",
+            description=(
+                "Global notifications send selected events for all users to configured routes. "
+                "Users can manage personal notifications in User Preferences."
+            ),
+        ),
+        TableField(
+            key="ADMIN_NOTIFICATION_ROUTES",
+            label="",
+            description=(
+                "Create one route per URL. Start with All, then add event-specific routes "
+                "for targeted delivery. Need format examples? "
+                "[View Apprise URL formats](https://appriseit.com/services/)."
+            ),
+            columns=[
+                {
+                    "key": "event",
+                    "label": "Event",
+                    "type": "multiselect",
+                    "options": _ROUTE_EVENT_OPTIONS,
+                    "defaultValue": [_ROUTE_EVENT_ALL],
+                    "placeholder": "Select events...",
+                },
+                {
+                    "key": "url",
+                    "label": "Notification URL",
+                    "type": "text",
+                    "placeholder": "e.g. ntfys://ntfy.sh/shelfmark",
+                },
+            ],
+            default=[dict(row) for row in _DEFAULT_ROUTE_ROWS],
+            add_label="Add Route",
+            empty_message="No routes configured.",
+        ),
+        ActionButton(
+            key="test_admin_notification",
+            label="Test Notification",
+            description="Send a test notification to all configured global route URLs.",
+            style="primary",
+            callback=_test_admin_notification_action,
+        ),
+        TableField(
+            key="USER_NOTIFICATION_ROUTES",
+            label="",
+            description=(
+                "Create one route per URL. Start with All, then add event-specific routes "
+                "for targeted delivery. Need format examples? "
+                "[View Apprise URL formats](https://appriseit.com/services/)."
+            ),
+            columns=[
+                {
+                    "key": "event",
+                    "label": "Event",
+                    "type": "multiselect",
+                    "options": _ROUTE_EVENT_OPTIONS,
+                    "defaultValue": [_ROUTE_EVENT_ALL],
+                    "placeholder": "Select events...",
+                },
+                {
+                    "key": "url",
+                    "label": "Notification URL",
+                    "type": "text",
+                    "placeholder": "e.g. ntfys://ntfy.sh/username-topic",
+                },
+            ],
+            default=[dict(row) for row in _DEFAULT_ROUTE_ROWS],
+            add_label="Add Route",
+            empty_message="No routes configured.",
+            user_overridable=True,
+            hidden_in_ui=True,
+        ),
+    ]

shelfmark/config/security.py

@@ -0,0 +1,306 @@
+"""Authentication settings registration."""
+
+from typing import TYPE_CHECKING, Any
+
+from shelfmark.config.migrations import migrate_security_settings
+from shelfmark.config.security_handlers import (
+    check_oidc_connection,
+    on_save_security,
+)
+from shelfmark.core.config import config as app_config
+from shelfmark.core.logger import setup_logger
+from shelfmark.core.settings_registry import (
+    ActionButton,
+    CheckboxField,
+    CustomComponentField,
+    PasswordField,
+    SelectField,
+    SettingsField,
+    TagListField,
+    TextField,
+    load_config_file,
+    register_on_save,
+    register_settings,
+)
+from shelfmark.core.user_db import sync_builtin_admin_user
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+logger = setup_logger(__name__)
+
+
+def _auth_condition(auth_method: str) -> dict[str, str]:
+    return {"field": "AUTH_METHOD", "value": auth_method}
+
+
+def _auth_field(factory: Callable[..., Any], auth_method: str, **kwargs: Any) -> Any:
+    return factory(show_when=_auth_condition(auth_method), **kwargs)
+
+
+def _migrate_security_settings() -> None:
+    from shelfmark.core.settings_registry import (
+        _ensure_config_dir,
+        _get_config_file_path,
+        save_config_file,
+    )
+
+    def _save_users_config(values: dict[str, Any]) -> None:
+        save_config_file("users", values)
+
+    migrate_security_settings(
+        load_security_config=lambda: load_config_file("security"),
+        load_users_config=lambda: load_config_file("users"),
+        save_users_config=_save_users_config,
+        ensure_config_dir=lambda: _ensure_config_dir("security"),
+        get_config_path=lambda: _get_config_file_path("security"),
+        sync_builtin_admin_user=sync_builtin_admin_user,
+        logger=logger,
+    )
+
+
+def _on_save_security(values: dict[str, Any]) -> dict[str, Any]:
+    return on_save_security(values)
+
+
+def _test_oidc_connection(current_values: dict[str, Any] | None = None) -> dict[str, Any]:
+    return check_oidc_connection(
+        load_security_config=lambda: {
+            "OIDC_DISCOVERY_URL": app_config.get("OIDC_DISCOVERY_URL", ""),
+        },
+        current_values=current_values or {},
+        logger=logger,
+    )
+
+
+@register_settings("security", "Security", icon="shield", order=5)
+def security_settings() -> list[SettingsField]:
+    """Security and authentication settings."""
+    from shelfmark.config.env import CWA_DB_PATH, DISABLE_LOCAL_AUTH
+
+    cwa_db_available = CWA_DB_PATH is not None and CWA_DB_PATH.exists()
+
+    auth_method_options = [
+        {"label": "No Authentication", "value": "none"},
+        {"label": "Local", "value": "builtin"},
+        {"label": "Proxy Authentication", "value": "proxy"},
+        {"label": "OIDC (OpenID Connect)", "value": "oidc"},
+        {"label": "Calibre-Web Database", "value": "cwa"},
+    ]
+
+    fields = [
+        SelectField(
+            key="AUTH_METHOD",
+            label="Authentication Method",
+            description=(
+                "Select the authentication method for accessing Shelfmark. "
+                "Restart container after changing Calibre-Web passwords."
+            ),
+            options=auth_method_options,
+            default="none",
+        ),
+        CustomComponentField(
+            key="builtin_admin_requirement",
+            component="oidc_admin_hint",
+            label=(
+                "Local authentication is inactive until a local admin account with a "
+                "password is created."
+            ),
+            show_when=_auth_condition("builtin"),
+        ),
+        *(
+            []
+            if DISABLE_LOCAL_AUTH
+            else [
+                CustomComponentField(
+                    key="oidc_admin_requirement",
+                    component="oidc_admin_hint",
+                    label="A local admin account is required before OIDC can be enabled.",
+                    show_when=_auth_condition("oidc"),
+                ),
+            ]
+        ),
+        *(
+            []
+            if cwa_db_available
+            else [
+                CustomComponentField(
+                    key="cwa_db_missing",
+                    component="oidc_admin_hint",
+                    label=(
+                        "Calibre-Web database not detected. Mount your app.db to "
+                        "/auth/app.db to enable this method. Authentication will fall "
+                        "back to none until the database is available."
+                    ),
+                    show_when=_auth_condition("cwa"),
+                ),
+            ]
+        ),
+        ActionButton(
+            key="open_users_tab",
+            label="Go to Users",
+            description="Configure local users and admin access in the Users tab.",
+            style="primary",
+            show_when={"field": "AUTH_METHOD", "value": ["builtin", "oidc"]},
+        ),
+        _auth_field(
+            TextField,
+            "proxy",
+            key="PROXY_AUTH_USER_HEADER",
+            label="Proxy Auth User Header",
+            description="The HTTP header your proxy uses to pass the authenticated username.",
+            placeholder="e.g. X-Auth-User",
+            default="X-Auth-User",
+        ),
+        _auth_field(
+            TextField,
+            "proxy",
+            key="PROXY_AUTH_LOGOUT_URL",
+            label="Proxy Auth Logout URL",
+            description="The URL to redirect users to for logging out. Leave empty to disable logout functionality.",
+            placeholder="https://myauth.example.com/logout",
+            default="",
+        ),
+        _auth_field(
+            TextField,
+            "proxy",
+            key="PROXY_AUTH_ADMIN_GROUP_HEADER",
+            label="Proxy Auth Admin Group Header",
+            description="Optional: header your proxy uses to pass user groups/roles.",
+            placeholder="e.g. X-Auth-Groups",
+            default="X-Auth-Groups",
+        ),
+        _auth_field(
+            TextField,
+            "proxy",
+            key="PROXY_AUTH_ADMIN_GROUP_NAME",
+            label="Proxy Auth Admin Group",
+            description="Optional: users in this group are treated as admins. Leave blank to skip group-based admin detection.",
+            placeholder="e.g. admins",
+            default="",
+        ),
+    ]
+
+    fields.append(
+        CustomComponentField(
+            key="oidc_callback_url",
+            component="settings_label",
+            label="Callback URL",
+            description="{origin}/api/auth/oidc/callback",
+            show_when=_auth_condition("oidc"),
+        )
+    )
+
+    oidc_specs = [
+        (
+            TextField,
+            {
+                "key": "OIDC_DISCOVERY_URL",
+                "label": "Discovery URL",
+                "description": "OpenID Connect discovery endpoint URL. Usually ends with /.well-known/openid-configuration.",
+                "placeholder": "https://auth.example.com/.well-known/openid-configuration",
+                "required": True,
+            },
+        ),
+        (
+            TextField,
+            {
+                "key": "OIDC_CLIENT_ID",
+                "label": "Client ID",
+                "description": "OAuth2 client ID from your identity provider.",
+                "placeholder": "shelfmark",
+                "required": True,
+            },
+        ),
+        (
+            PasswordField,
+            {
+                "key": "OIDC_CLIENT_SECRET",
+                "label": "Client Secret",
+                "description": "OAuth2 client secret from your identity provider.",
+                "required": True,
+            },
+        ),
+        (
+            TagListField,
+            {
+                "key": "OIDC_SCOPES",
+                "label": "Scopes",
+                "description": "OAuth2 scopes to request from the identity provider. Managed automatically: includes essential scopes and the group claim when using admin group authorization.",
+                "default": ["openid", "email", "profile"],
+            },
+        ),
+        (
+            TextField,
+            {
+                "key": "OIDC_GROUP_CLAIM",
+                "label": "Group Claim Name",
+                "description": "The name of the claim in the ID token that contains user groups.",
+                "placeholder": "groups",
+                "default": "groups",
+            },
+        ),
+        (
+            TextField,
+            {
+                "key": "OIDC_ADMIN_GROUP",
+                "label": "Admin Group Name",
+                "description": "Users in this group will be given admin access (if enabled below). Leave empty to use database roles only.",
+                "placeholder": "shelfmark-admins",
+                "default": "",
+            },
+        ),
+        (
+            CheckboxField,
+            {
+                "key": "OIDC_USE_ADMIN_GROUP",
+                "label": "Use Admin Group for Authorization",
+                "description": "When enabled, users in the Admin Group are granted admin access. When disabled, admin access is determined solely by database roles.",
+                "default": True,
+            },
+        ),
+        (
+            CheckboxField,
+            {
+                "key": "OIDC_AUTO_PROVISION",
+                "label": "Auto-Provision Users",
+                "description": "Automatically create a user account on first OIDC login. When disabled, users must be pre-created by an admin.",
+                "default": True,
+            },
+        ),
+        (
+            TextField,
+            {
+                "key": "OIDC_BUTTON_LABEL",
+                "label": "Login Button Label",
+                "description": "Custom label for the OIDC sign-in button on the login page.",
+                "placeholder": "Sign in with OIDC",
+                "default": "",
+            },
+        ),
+    ]
+    fields.extend(_auth_field(factory, "oidc", **spec) for factory, spec in oidc_specs)
+    fields.append(
+        ActionButton(
+            key="test_oidc",
+            label="Test Connection",
+            description="Fetch the OIDC discovery document and validate configuration.",
+            style="primary",
+            callback=_test_oidc_connection,
+            show_when=_auth_condition("oidc"),
+        )
+    )
+    fields.append(
+        CustomComponentField(
+            key="oidc_env_info",
+            component="oidc_env_info",
+            label="Environment-Only Options",
+            description="These options can only be set via environment variables because changing them through the UI could lock you out of the application.",
+            wrap_in_field_wrapper=True,
+            show_when=_auth_condition("oidc"),
+        )
+    )
+    return fields
+
+
+register_on_save("security", _on_save_security)

shelfmark/config/security_handlers.py

@@ -0,0 +1,147 @@
+"""Operational handlers for security settings (save/actions)."""
+
+import os
+from pathlib import Path
+from typing import TYPE_CHECKING, Any
+
+from shelfmark.config.env import DISABLE_LOCAL_AUTH
+from shelfmark.core.user_db import UserDB
+from shelfmark.core.utils import normalize_http_url
+from shelfmark.download.network import get_ssl_verify
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+_OIDC_LOCKOUT_MESSAGE = "A local admin account with a password is required before enabling OIDC. Use the 'Go to Users' button above to create one. This ensures you can still sign in if your identity provider is unavailable."
+_OIDC_REQUIRED_FIELDS = (
+    ("OIDC_DISCOVERY_URL", "Discovery URL"),
+    ("OIDC_CLIENT_ID", "Client ID"),
+    ("OIDC_CLIENT_SECRET", "Client Secret"),
+)
+
+
+def _has_local_password_admin() -> bool:
+    root = os.environ.get("CONFIG_DIR", "/config")
+    user_db = UserDB(str(Path(root) / "users.db"))
+    user_db.initialize()
+    return any(
+        user.get("password_hash") and user.get("role") == "admin" for user in user_db.list_users()
+    )
+
+
+def _load_effective_security_values(values: dict[str, Any]) -> dict[str, Any]:
+    """Merge the current save payload onto the persisted security config."""
+    from shelfmark.core.settings_registry import load_config_file
+
+    effective_values = load_config_file("security")
+    effective_values.update(values)
+    return effective_values
+
+
+def _get_missing_oidc_required_fields(effective_values: dict[str, Any]) -> list[str]:
+    """Return missing required OIDC field labels from the effective config."""
+    missing_fields: list[str] = []
+
+    for key, label in _OIDC_REQUIRED_FIELDS:
+        value = effective_values.get(key)
+        if value is None:
+            missing_fields.append(label)
+            continue
+        if isinstance(value, str) and not value.strip():
+            missing_fields.append(label)
+
+    return missing_fields
+
+
+def on_save_security(
+    values: dict[str, Any],
+) -> dict[str, Any]:
+    """Validate security values before persistence."""
+    normalized_values = values.copy()
+
+    discovery_url = normalized_values.get("OIDC_DISCOVERY_URL")
+    if discovery_url is not None:
+        normalized_values["OIDC_DISCOVERY_URL"] = normalize_http_url(
+            str(discovery_url),
+            default_scheme="https",
+            strip_trailing_slash=False,
+        )
+
+    proxy_logout_url = normalized_values.get("PROXY_AUTH_LOGOUT_URL")
+    if proxy_logout_url is not None:
+        normalized_values["PROXY_AUTH_LOGOUT_URL"] = normalize_http_url(
+            str(proxy_logout_url),
+            default_scheme="https",
+            strip_trailing_slash=False,
+        )
+
+    effective_values = _load_effective_security_values(normalized_values)
+    auth_method = str(effective_values.get("AUTH_METHOD", "") or "").strip().lower()
+
+    if auth_method == "oidc":
+        if not DISABLE_LOCAL_AUTH and not _has_local_password_admin():
+            return {"error": True, "message": _OIDC_LOCKOUT_MESSAGE, "values": normalized_values}
+
+        missing_fields = _get_missing_oidc_required_fields(effective_values)
+        if missing_fields:
+            missing_fields_text = ", ".join(missing_fields)
+            return {
+                "error": True,
+                "message": f"OIDC configuration is incomplete: missing {missing_fields_text}.",
+                "values": normalized_values,
+            }
+
+    return {"error": False, "values": normalized_values}
+
+
+def check_oidc_connection(
+    *,
+    load_security_config: Callable[[], dict[str, Any]],
+    current_values: dict[str, Any] | None = None,
+    logger: Any,
+) -> dict[str, Any]:
+    """Fetch and validate the configured OIDC discovery document."""
+    import requests
+
+    try:
+        # Prefer the current (unsaved) form value over the saved config
+        discovery_url = (current_values or {}).get(
+            "OIDC_DISCOVERY_URL"
+        ) or load_security_config().get("OIDC_DISCOVERY_URL", "")
+        if not discovery_url:
+            return {"success": False, "message": "Discovery URL is not configured."}
+
+        response = requests.get(discovery_url, timeout=10, verify=get_ssl_verify(discovery_url))
+        response.raise_for_status()
+        document = response.json()
+
+        required_fields = ["issuer", "authorization_endpoint", "token_endpoint", "jwks_uri"]
+        missing_fields = [field for field in required_fields if field not in document]
+        if missing_fields:
+            return {
+                "success": False,
+                "message": f"Discovery document missing fields: {', '.join(missing_fields)}",
+            }
+
+        # Logins verify the ID token against the provider's JWKS, so an empty key
+        # set (e.g. an Authentik provider with no Signing Key selected) means every
+        # login will fail even though discovery looks healthy.
+        jwks_uri = str(document["jwks_uri"])
+        jwks_response = requests.get(jwks_uri, timeout=10, verify=get_ssl_verify(jwks_uri))
+        jwks_response.raise_for_status()
+        jwks_document = jwks_response.json()
+        jwks_keys = jwks_document.get("keys") if isinstance(jwks_document, dict) else None
+        if not jwks_keys:
+            return {
+                "success": False,
+                "message": (
+                    "Discovery document is valid, but the provider returned no token "
+                    "signing keys (empty JWKS), so logins will fail. If you use "
+                    "Authentik, select a Signing Key in the provider settings."
+                ),
+            }
+
+        return {"success": True, "message": f"Connected to {document['issuer']}"}
+    except Exception as exc:
+        logger.exception("OIDC connection test failed")
+        return {"success": False, "message": f"Connection failed: {exc!s}"}

shelfmark/config/users_settings.py

@@ -0,0 +1,417 @@
+"""Users settings tab registration.
+
+This registers a 'users' tab in the settings sidebar.
+The actual user management is handled by a custom frontend component
+that talks to /api/admin/users endpoints.
+"""
+
+from typing import Any
+
+from shelfmark.core.request_policy import (
+    get_source_content_type_capabilities,
+    parse_policy_mode,
+    validate_policy_rules,
+)
+from shelfmark.core.settings_registry import (
+    CheckboxField,
+    CustomComponentField,
+    HeadingField,
+    MultiSelectField,
+    NumberField,
+    SelectField,
+    SettingsField,
+    TableField,
+    register_on_save,
+    register_settings,
+)
+
+_REQUEST_DEFAULT_MODE_OPTIONS = [
+    {
+        "value": "download",
+        "label": "Download",
+        "description": "Everything can be downloaded directly.",
+    },
+    {
+        "value": "request_release",
+        "label": "Request Release",
+        "description": "Users must request a specific release.",
+    },
+    {
+        "value": "request_book",
+        "label": "Request Book",
+        "description": "Users request a book, admin picks the release.",
+    },
+    {
+        "value": "blocked",
+        "label": "Blocked",
+        "description": "No downloads or requests allowed.",
+    },
+]
+
+_REQUEST_MATRIX_MODE_OPTIONS = [
+    option for option in _REQUEST_DEFAULT_MODE_OPTIONS if option["value"] != "request_book"
+]
+
+_SELF_SETTINGS_SECTION_OPTIONS = [
+    {
+        "value": "delivery",
+        "label": "Delivery Preferences",
+        "description": "Show personal delivery output and destination settings.",
+    },
+    {
+        "value": "search",
+        "label": "Search Preferences",
+        "description": "Show personal search mode and provider settings.",
+    },
+    {
+        "value": "notifications",
+        "label": "Notifications",
+        "description": "Show personal notification route settings.",
+    },
+]
+_SELF_SETTINGS_SECTION_VALUES = {option["value"] for option in _SELF_SETTINGS_SECTION_OPTIONS}
+_SELF_SETTINGS_SECTION_DEFAULTS = [option["value"] for option in _SELF_SETTINGS_SECTION_OPTIONS]
+_SEARCH_MODE_VALUES = {"direct", "universal"}
+_SEARCH_PREFERENCE_PROVIDER_KEYS = {
+    "METADATA_PROVIDER",
+    "METADATA_PROVIDER_AUDIOBOOK",
+    "METADATA_PROVIDER_COMBINED",
+}
+_SEARCH_PREFERENCE_VALIDATABLE_KEYS = {
+    "SEARCH_MODE",
+    "DEFAULT_RELEASE_SOURCE",
+    "DEFAULT_RELEASE_SOURCE_AUDIOBOOK",
+    "SHOW_COMBINED_SELECTOR",
+    "FORCE_COMBINED_SEARCH",
+    *_SEARCH_PREFERENCE_PROVIDER_KEYS,
+}
+
+_USERS_HEADING_DESCRIPTION_BY_AUTH_MODE = {
+    "builtin": (
+        "Create and manage user accounts directly. Passwords are stored locally and users sign in "
+        "with their username and password."
+    ),
+    "oidc": (
+        "Users sign in through your identity provider. New accounts can be created automatically on "
+        "first login when auto-provisioning is enabled, or you can pre-create users here and they\u2019ll "
+        "be linked by email on first sign-in."
+    ),
+    "proxy": (
+        "Users are authenticated by your reverse proxy. Accounts are automatically created on first "
+        "sign-in. If a local user with a matching username already exists, it will be linked instead."
+    ),
+    "cwa": (
+        "User accounts are synced from your Calibre-Web database. Users are matched by email, and new "
+        "accounts are created here when new CWA users are found."
+    ),
+    "none": "Authentication is disabled. Anyone can access Shelfmark without signing in.",
+    "default": "Authentication is disabled. Anyone can access Shelfmark without signing in.",
+}
+
+
+def _get_request_source_options() -> list[dict[str, str]]:
+    """Build request-policy source options from registered release sources."""
+    from shelfmark.release_sources import list_available_sources
+
+    return [
+        {
+            "value": source["name"],
+            "label": source["display_name"],
+        }
+        for source in list_available_sources()
+    ]
+
+
+def _get_valid_release_source_names_for_content_type(content_type: str) -> set[str]:
+    """Return registered release source names that support the requested content type."""
+    from shelfmark.release_sources import list_available_sources
+
+    valid_sources: set[str] = set()
+    for source in list_available_sources():
+        supported_types = source.get("supported_content_types", ["ebook", "audiobook"])
+        if content_type in supported_types:
+            valid_sources.add(source["name"])
+    return valid_sources
+
+
+def _get_request_policy_rule_columns() -> list[dict[str, object]]:
+    source_capabilities = get_source_content_type_capabilities()
+    content_type_options = []
+
+    for source_name, supported_types in source_capabilities.items():
+        normalized_types = [t for t in ("ebook", "audiobook") if t in supported_types]
+        content_type_options.extend(
+            {
+                "value": content_type,
+                "label": "Ebook" if content_type == "ebook" else "Audiobook",
+                "childOf": source_name,
+            }
+            for content_type in normalized_types
+        )
+
+    return [
+        {
+            "key": "source",
+            "label": "Source",
+            "type": "select",
+            "options": _get_request_source_options(),
+            "defaultValue": "",
+            "placeholder": "Select source...",
+        },
+        {
+            "key": "content_type",
+            "label": "Content Type",
+            "type": "select",
+            "options": content_type_options,
+            "defaultValue": "",
+            "placeholder": "Select content type...",
+            "filterByField": "source",
+        },
+        {
+            "key": "mode",
+            "label": "Mode",
+            "type": "select",
+            "options": _REQUEST_MATRIX_MODE_OPTIONS,
+            "defaultValue": "",
+            "placeholder": "Select mode...",
+        },
+    ]
+
+
+def validate_search_preference_value(key: str, value: Any) -> tuple[Any, str | None]:
+    """Validate and normalize a search preference value for user overrides."""
+    if key not in _SEARCH_PREFERENCE_VALIDATABLE_KEYS:
+        return value, None
+
+    if value is None:
+        return None, None
+
+    normalized_value = str(value).strip()
+
+    if key == "SEARCH_MODE":
+        normalized_mode = normalized_value.lower()
+        if normalized_mode not in _SEARCH_MODE_VALUES:
+            return value, "SEARCH_MODE must be 'direct' or 'universal'"
+        return normalized_mode, None
+
+    if key in _SEARCH_PREFERENCE_PROVIDER_KEYS:
+        if normalized_value == "":
+            return "", None
+        from shelfmark.metadata_providers import is_provider_registered
+
+        if not is_provider_registered(normalized_value):
+            return (
+                value,
+                f"{key} must be a valid metadata provider name or empty",
+            )
+        return normalized_value, None
+
+    if key in {"DEFAULT_RELEASE_SOURCE", "DEFAULT_RELEASE_SOURCE_AUDIOBOOK"}:
+        if normalized_value == "":
+            return "", None
+        valid_sources = _get_valid_release_source_names_for_content_type(
+            "audiobook" if key == "DEFAULT_RELEASE_SOURCE_AUDIOBOOK" else "ebook"
+        )
+        if normalized_value not in valid_sources:
+            return (
+                value,
+                f"{key} must be a valid release source name or empty",
+            )
+        return normalized_value, None
+
+    if key == "SHOW_COMBINED_SELECTOR":
+        if isinstance(value, bool):
+            return value, None
+        return bool(value), None
+
+    if key == "FORCE_COMBINED_SEARCH":
+        if isinstance(value, bool):
+            return value, None
+        return bool(value), None
+
+    return value, None
+
+
+def _on_save_users(values: dict[str, object]) -> dict[str, object]:
+    """Validate users/request-policy settings before persistence."""
+    if "VISIBLE_SELF_SETTINGS_SECTIONS" in values:
+        raw_sections = values["VISIBLE_SELF_SETTINGS_SECTIONS"]
+        if raw_sections is None:
+            candidate_sections: list[str] = []
+        elif isinstance(raw_sections, str):
+            candidate_sections = [s.strip() for s in raw_sections.split(",") if s.strip()]
+        elif isinstance(raw_sections, (list, tuple, set)):
+            candidate_sections = [
+                str(section).strip() for section in raw_sections if str(section).strip()
+            ]
+        else:
+            return {
+                "error": True,
+                "message": "VISIBLE_SELF_SETTINGS_SECTIONS must be a list of section identifiers",
+                "values": values,
+            }
+
+        normalized_sections: list[str] = []
+        for section in candidate_sections:
+            if section not in _SELF_SETTINGS_SECTION_VALUES:
+                allowed = ", ".join(sorted(_SELF_SETTINGS_SECTION_VALUES))
+                return {
+                    "error": True,
+                    "message": (
+                        "VISIBLE_SELF_SETTINGS_SECTIONS contains an unsupported section "
+                        f"'{section}'. Supported values: {allowed}"
+                    ),
+                    "values": values,
+                }
+            if section not in normalized_sections:
+                normalized_sections.append(section)
+
+        values["VISIBLE_SELF_SETTINGS_SECTIONS"] = normalized_sections
+
+    if (
+        "REQUEST_POLICY_DEFAULT_EBOOK" in values
+        and parse_policy_mode(values["REQUEST_POLICY_DEFAULT_EBOOK"]) is None
+    ):
+        return {
+            "error": True,
+            "message": "REQUEST_POLICY_DEFAULT_EBOOK must be a valid policy mode",
+            "values": values,
+        }
+
+    if (
+        "REQUEST_POLICY_DEFAULT_AUDIOBOOK" in values
+        and parse_policy_mode(values["REQUEST_POLICY_DEFAULT_AUDIOBOOK"]) is None
+    ):
+        return {
+            "error": True,
+            "message": "REQUEST_POLICY_DEFAULT_AUDIOBOOK must be a valid policy mode",
+            "values": values,
+        }
+
+    if "REQUEST_POLICY_RULES" in values:
+        normalized_rules, errors = validate_policy_rules(values["REQUEST_POLICY_RULES"])
+        if errors:
+            return {
+                "error": True,
+                "message": "; ".join(errors),
+                "values": values,
+            }
+        values["REQUEST_POLICY_RULES"] = normalized_rules
+
+    for key in _SEARCH_PREFERENCE_VALIDATABLE_KEYS:
+        if key not in values:
+            continue
+        normalized_value, validation_error = validate_search_preference_value(key, values[key])
+        if validation_error:
+            return {
+                "error": True,
+                "message": validation_error,
+                "values": values,
+            }
+        values[key] = normalized_value
+
+    return {"error": False, "values": values}
+
+
+register_on_save("users", _on_save_users)
+
+
+@register_settings("users", "Users & Requests", icon="users", order=6)
+def users_settings() -> list[SettingsField]:
+    """User management tab - rendered as a custom component on the frontend."""
+    return [
+        HeadingField(
+            key="users_heading",
+            title="Users",
+            description=_USERS_HEADING_DESCRIPTION_BY_AUTH_MODE["default"],
+            description_by_auth_mode=_USERS_HEADING_DESCRIPTION_BY_AUTH_MODE,
+        ),
+        CustomComponentField(
+            key="users_management",
+            component="users_management",
+        ),
+        MultiSelectField(
+            key="VISIBLE_SELF_SETTINGS_SECTIONS",
+            label="Visible Self-Settings Sections",
+            description=(
+                "Choose which personal settings sections are shown in My Account for non-admin users."
+            ),
+            options=_SELF_SETTINGS_SECTION_OPTIONS,
+            default=_SELF_SETTINGS_SECTION_DEFAULTS,
+            variant="dropdown",
+            env_supported=False,
+        ),
+        HeadingField(
+            key="requests_heading",
+            title="Requests",
+            description=("Choose what users can download directly and what needs approval first."),
+        ),
+        CheckboxField(
+            key="REQUESTS_ENABLED",
+            label="Enable Requests",
+            description=(
+                "Turn this off to let everyone download directly without needing approval."
+            ),
+            default=False,
+            user_overridable=True,
+        ),
+        CustomComponentField(
+            key="request_policy_editor",
+            component="request_policy_grid",
+            label="Request Rules",
+            description=(
+                "Fine-tune access per source. Source rules can only be the same or more restrictive than the default above."
+            ),
+            show_when={"field": "REQUESTS_ENABLED", "value": True},
+            wrap_in_field_wrapper=True,
+            value_fields=[
+                SelectField(
+                    key="REQUEST_POLICY_DEFAULT_EBOOK",
+                    label="Default Ebook Mode",
+                    description=("Sets the baseline for all ebook sources."),
+                    options=_REQUEST_DEFAULT_MODE_OPTIONS,
+                    default="download",
+                    user_overridable=True,
+                ),
+                SelectField(
+                    key="REQUEST_POLICY_DEFAULT_AUDIOBOOK",
+                    label="Default Audiobook Mode",
+                    description=("Sets the baseline for all audiobook sources."),
+                    options=_REQUEST_DEFAULT_MODE_OPTIONS,
+                    default="download",
+                    user_overridable=True,
+                ),
+                TableField(
+                    key="REQUEST_POLICY_RULES",
+                    label="Request Rules",
+                    description=(
+                        "Fine-tune access per source. Source rules can only be the same or more restrictive than the default above."
+                    ),
+                    columns=_get_request_policy_rule_columns,
+                    default=[],
+                    add_label="Add Rule",
+                    empty_message="No request policy rules configured.",
+                    env_supported=False,
+                    user_overridable=True,
+                ),
+            ],
+        ),
+        NumberField(
+            key="MAX_PENDING_REQUESTS_PER_USER",
+            label="Max pending requests per user",
+            description="How many open requests a user can have at a time.",
+            default=20,
+            min_value=1,
+            max_value=1000,
+            user_overridable=True,
+            show_when={"field": "REQUESTS_ENABLED", "value": True},
+        ),
+        CheckboxField(
+            key="REQUESTS_ALLOW_NOTES",
+            label="Allow notes on requests",
+            description="Let users add a note when they submit a request.",
+            default=True,
+            user_overridable=True,
+            show_when={"field": "REQUESTS_ENABLED", "value": True},
+        ),
+    ]

shelfmark/core/__init__.py

@@ -0,0 +1,14 @@
+"""Core module - shared models, queue, and utilities."""
+
+from shelfmark.core.logger import setup_logger
+from shelfmark.core.models import QueueItem, QueueStatus, SearchFilters
+from shelfmark.core.queue import BookQueue, book_queue
+
+__all__ = [
+    "BookQueue",
+    "QueueItem",
+    "QueueStatus",
+    "SearchFilters",
+    "book_queue",
+    "setup_logger",
+]

shelfmark/core/activity_view_state_service.py

@@ -0,0 +1,327 @@
+"""Persistence helpers for per-viewer activity visibility state."""
+
+from __future__ import annotations
+
+import sqlite3
+import threading
+from typing import Any
+
+from shelfmark.core.request_helpers import now_utc_iso
+
+VALID_ACTIVITY_ITEM_TYPES = frozenset({"download", "request"})
+ADMIN_VIEWER_SCOPE = "admin:shared"
+NOAUTH_VIEWER_SCOPE = "noauth:shared"
+USER_VIEWER_SCOPE_PREFIX = "user:"
+
+
+def user_viewer_scope(user_id: int) -> str:
+    """Build the persisted viewer scope string for a specific user."""
+    if not isinstance(user_id, int) or user_id < 1:
+        msg = "user_id must be a positive integer"
+        raise ValueError(msg)
+    return f"{USER_VIEWER_SCOPE_PREFIX}{user_id}"
+
+
+def normalize_viewer_scope(viewer_scope: object) -> str:
+    """Validate and normalize a persisted viewer scope string."""
+    if not isinstance(viewer_scope, str) or not viewer_scope.strip():
+        msg = "viewer_scope must be a non-empty string"
+        raise ValueError(msg)
+
+    normalized = viewer_scope.strip()
+    if normalized in {ADMIN_VIEWER_SCOPE, NOAUTH_VIEWER_SCOPE}:
+        return normalized
+
+    if not normalized.startswith(USER_VIEWER_SCOPE_PREFIX):
+        msg = "viewer_scope must be one of: admin:shared, noauth:shared, or user:<id>"
+        raise ValueError(msg)
+
+    raw_user_id = normalized[len(USER_VIEWER_SCOPE_PREFIX) :].strip()
+    try:
+        parsed_user_id = int(raw_user_id)
+    except (TypeError, ValueError) as exc:
+        msg = "viewer_scope user id must be a positive integer"
+        raise ValueError(msg) from exc
+
+    return user_viewer_scope(parsed_user_id)
+
+
+def _normalize_item_type(item_type: object) -> str:
+    if not isinstance(item_type, str) or not item_type.strip():
+        msg = "item_type must be a non-empty string"
+        raise ValueError(msg)
+    normalized = item_type.strip().lower()
+    if normalized not in VALID_ACTIVITY_ITEM_TYPES:
+        msg = "item_type must be one of: download, request"
+        raise ValueError(msg)
+    return normalized
+
+
+def _normalize_item_key(item_key: object, *, item_type: str) -> str:
+    if not isinstance(item_key, str) or not item_key.strip():
+        msg = "item_key must be a non-empty string"
+        raise ValueError(msg)
+
+    normalized = item_key.strip()
+    expected_prefix = f"{item_type}:"
+    if not normalized.startswith(expected_prefix):
+        msg_0 = f"item_key must be in the format {expected_prefix}<id>"
+        raise ValueError(msg_0)
+    if not normalized.split(":", 1)[1].strip():
+        msg_0 = f"item_key must be in the format {expected_prefix}<id>"
+        raise ValueError(msg_0)
+    return normalized
+
+
+class ActivityViewStateService:
+    """Service for per-viewer activity dismissal and history visibility."""
+
+    def __init__(self, db_path: str) -> None:
+        """Initialize the service with the SQLite state database path."""
+        self._db_path = db_path
+        self._lock = threading.Lock()
+
+    def _connect(self) -> sqlite3.Connection:
+        conn = sqlite3.connect(self._db_path)
+        conn.row_factory = sqlite3.Row
+        conn.execute("PRAGMA foreign_keys = ON")
+        return conn
+
+    def list_hidden(
+        self,
+        *,
+        viewer_scope: str,
+        limit: int | None = None,
+    ) -> list[dict[str, Any]]:
+        """Return dismissed rows for a viewer, including cleared history entries."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+        normalized_limit = None if limit is None else max(1, int(limit))
+        query = """
+            SELECT item_type, item_key, dismissed_at, cleared_at
+            FROM activity_view_state
+            WHERE viewer_scope = ?
+              AND dismissed_at IS NOT NULL
+            ORDER BY COALESCE(cleared_at, dismissed_at) DESC, id DESC
+        """
+        params: list[Any] = [normalized_scope]
+        if normalized_limit is not None:
+            query += "\nLIMIT ?"
+            params.append(normalized_limit)
+
+        conn = self._connect()
+        try:
+            rows = conn.execute(query, params).fetchall()
+            return [dict(row) for row in rows]
+        finally:
+            conn.close()
+
+    def list_history(
+        self,
+        *,
+        viewer_scope: str,
+        limit: int = 50,
+        offset: int = 0,
+    ) -> list[dict[str, Any]]:
+        """Return active dismissal history rows for a viewer."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+        normalized_limit = max(1, min(int(limit), 5000))
+        normalized_offset = max(0, int(offset))
+
+        conn = self._connect()
+        try:
+            rows = conn.execute(
+                """
+                SELECT item_type, item_key, dismissed_at
+                FROM activity_view_state
+                WHERE viewer_scope = ?
+                  AND dismissed_at IS NOT NULL
+                  AND cleared_at IS NULL
+                ORDER BY dismissed_at DESC, id DESC
+                LIMIT ? OFFSET ?
+                """,
+                (normalized_scope, normalized_limit, normalized_offset),
+            ).fetchall()
+            return [dict(row) for row in rows]
+        finally:
+            conn.close()
+
+    def dismiss(
+        self,
+        *,
+        viewer_scope: str,
+        item_type: str,
+        item_key: str,
+    ) -> int:
+        """Mark a single activity item as dismissed for a viewer."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+        normalized_type = _normalize_item_type(item_type)
+        normalized_key = _normalize_item_key(item_key, item_type=normalized_type)
+        dismissed_at = now_utc_iso()
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.execute(
+                    """
+                    INSERT INTO activity_view_state (
+                        viewer_scope,
+                        item_type,
+                        item_key,
+                        dismissed_at,
+                        cleared_at
+                    )
+                    VALUES (?, ?, ?, ?, NULL)
+                    ON CONFLICT(viewer_scope, item_type, item_key) DO UPDATE SET
+                        dismissed_at = excluded.dismissed_at,
+                        cleared_at = NULL
+                    """,
+                    (normalized_scope, normalized_type, normalized_key, dismissed_at),
+                )
+                conn.commit()
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                return max(rowcount, 0)
+            finally:
+                conn.close()
+
+    def dismiss_many(
+        self,
+        *,
+        viewer_scope: str,
+        items: list[dict[str, str]],
+    ) -> int:
+        """Mark multiple activity items as dismissed for a viewer."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+        if not items:
+            return 0
+
+        seen: set[tuple[str, str]] = set()
+        normalized_items: list[tuple[str, str]] = []
+        for item in items:
+            normalized_type = _normalize_item_type(item.get("item_type"))
+            normalized_key = _normalize_item_key(item.get("item_key"), item_type=normalized_type)
+            marker = (normalized_type, normalized_key)
+            if marker in seen:
+                continue
+            seen.add(marker)
+            normalized_items.append(marker)
+
+        if not normalized_items:
+            return 0
+
+        dismissed_at = now_utc_iso()
+        with self._lock:
+            conn = self._connect()
+            try:
+                total = 0
+                for normalized_type, normalized_key in normalized_items:
+                    cursor = conn.execute(
+                        """
+                        INSERT INTO activity_view_state (
+                            viewer_scope,
+                            item_type,
+                            item_key,
+                            dismissed_at,
+                            cleared_at
+                        )
+                        VALUES (?, ?, ?, ?, NULL)
+                        ON CONFLICT(viewer_scope, item_type, item_key) DO UPDATE SET
+                            dismissed_at = excluded.dismissed_at,
+                            cleared_at = NULL
+                        """,
+                        (
+                            normalized_scope,
+                            normalized_type,
+                            normalized_key,
+                            dismissed_at,
+                        ),
+                    )
+                    rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                    total += max(rowcount, 0)
+                conn.commit()
+                return total
+            finally:
+                conn.close()
+
+    def clear_history(self, *, viewer_scope: str) -> int:
+        """Mark all dismissed items as cleared for a viewer."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+        cleared_at = now_utc_iso()
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.execute(
+                    """
+                    UPDATE activity_view_state
+                    SET cleared_at = ?
+                    WHERE viewer_scope = ?
+                      AND dismissed_at IS NOT NULL
+                      AND cleared_at IS NULL
+                    """,
+                    (cleared_at, normalized_scope),
+                )
+                conn.commit()
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                return max(rowcount, 0)
+            finally:
+                conn.close()
+
+    def clear_item_for_all_viewers(self, *, item_type: str, item_key: str) -> int:
+        """Delete a dismissed item record for every viewer."""
+        normalized_type = _normalize_item_type(item_type)
+        normalized_key = _normalize_item_key(item_key, item_type=normalized_type)
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.execute(
+                    """
+                    DELETE FROM activity_view_state
+                    WHERE item_type = ? AND item_key = ?
+                    """,
+                    (normalized_type, normalized_key),
+                )
+                conn.commit()
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                return max(rowcount, 0)
+            finally:
+                conn.close()
+
+    def delete_viewer_scope(self, *, viewer_scope: str) -> int:
+        """Delete all activity-view state rows for a viewer scope."""
+        normalized_scope = normalize_viewer_scope(viewer_scope)
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.execute(
+                    "DELETE FROM activity_view_state WHERE viewer_scope = ?",
+                    (normalized_scope,),
+                )
+                conn.commit()
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                return max(rowcount, 0)
+            finally:
+                conn.close()
+
+    def delete_items(self, *, item_type: str, item_keys: list[str]) -> int:
+        """Delete multiple dismissed item records for a given item type."""
+        normalized_type = _normalize_item_type(item_type)
+        normalized_keys = [
+            _normalize_item_key(item_key, item_type=normalized_type) for item_key in item_keys
+        ]
+        if not normalized_keys:
+            return 0
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.executemany(
+                    "DELETE FROM activity_view_state WHERE item_type = ? AND item_key = ?",
+                    [(normalized_type, normalized_key) for normalized_key in normalized_keys],
+                )
+                conn.commit()
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                return max(rowcount, 0)
+            finally:
+                conn.close()

shelfmark/core/admin_routes.py

@@ -0,0 +1,474 @@
+"""Admin user management API routes.
+
+Registers /api/admin/users CRUD endpoints for managing users.
+All endpoints require admin session.
+"""
+
+from __future__ import annotations
+
+import os
+import sqlite3
+from functools import wraps
+from typing import TYPE_CHECKING, Any, ParamSpec
+
+from flask import Flask, Response, g, jsonify, request, session
+from werkzeug.security import generate_password_hash
+
+from shelfmark.config.booklore_settings import (
+    get_booklore_library_options,
+    get_booklore_path_options,
+)
+from shelfmark.config.env import CWA_DB_PATH
+from shelfmark.core.admin_settings_routes import (
+    register_admin_settings_routes,
+    validate_user_settings,
+)
+from shelfmark.core.auth_modes import (
+    AUTH_SOURCE_BUILTIN,
+    AUTH_SOURCE_CWA,
+    AUTH_SOURCE_OIDC,
+    AUTH_SOURCE_PROXY,
+    is_user_active_for_auth_mode,
+    load_active_auth_mode,
+    normalize_auth_source,
+)
+from shelfmark.core.config import config as app_config
+from shelfmark.core.cwa_user_sync import sync_cwa_users_from_rows
+from shelfmark.core.logger import setup_logger
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+    from flask.typing import ResponseReturnValue
+
+    from shelfmark.core.user_db import UserDB
+
+P = ParamSpec("P")
+
+logger = setup_logger(__name__)
+MIN_PASSWORD_LENGTH = 4
+_CONFIG_REFRESH_ERRORS = (ImportError, OSError, RuntimeError, TypeError, ValueError)
+
+__all__ = [
+    "get_booklore_library_options",
+    "get_booklore_path_options",
+    "register_admin_routes",
+    "validate_user_settings",
+]
+
+
+def _get_user_edit_capabilities(
+    user: dict[str, Any],
+    security_config: dict[str, Any] | None = None,
+) -> dict[str, Any]:
+    """Return backend-authored capability flags for the user edit form."""
+    auth_source = normalize_auth_source(
+        user.get("auth_source"),
+        user.get("oidc_subject"),
+    )
+    oidc_use_admin_group = bool(
+        (security_config or {}).get(
+            "OIDC_USE_ADMIN_GROUP",
+            app_config.get("OIDC_USE_ADMIN_GROUP", True),
+        )
+    )
+    role_managed_by_oidc_group = auth_source == AUTH_SOURCE_OIDC and oidc_use_admin_group
+    can_edit_role = auth_source == AUTH_SOURCE_BUILTIN or (
+        auth_source == AUTH_SOURCE_OIDC and not role_managed_by_oidc_group
+    )
+
+    return {
+        "authSource": auth_source,
+        "canSetPassword": auth_source == AUTH_SOURCE_BUILTIN,
+        "canEditRole": can_edit_role,
+        "canEditEmail": auth_source in {AUTH_SOURCE_BUILTIN, AUTH_SOURCE_PROXY},
+        "canEditDisplayName": auth_source != AUTH_SOURCE_OIDC,
+    }
+
+
+def _sanitize_user(user: dict) -> dict:
+    """Remove sensitive fields from user dict before returning to client."""
+    sanitized = dict(user)
+    sanitized.pop("password_hash", None)
+    return sanitized
+
+
+def _oidc_role_management_message(security_config: dict[str, Any] | None = None) -> str:
+    admin_group = (security_config or {}).get(
+        "OIDC_ADMIN_GROUP",
+        app_config.get("OIDC_ADMIN_GROUP", ""),
+    )
+    if admin_group:
+        return (
+            "Admin roles for OIDC users are managed by the "
+            f"'{admin_group}' group in your identity provider"
+        )
+    return (
+        "Disable 'Use Admin Group for Authorization' in security settings to manage roles manually"
+    )
+
+
+def _serialize_user(
+    user: dict[str, Any],
+    auth_method: str,
+    security_config: dict[str, Any] | None = None,
+) -> dict[str, Any]:
+    """Sanitize and enrich a user payload for API responses."""
+    payload = _sanitize_user(user)
+    payload["auth_source"] = normalize_auth_source(
+        payload.get("auth_source"),
+        payload.get("oidc_subject"),
+    )
+    payload["is_active"] = is_user_active_for_auth_mode(payload, auth_method)
+    payload["edit_capabilities"] = _get_user_edit_capabilities(
+        payload,
+        security_config=security_config,
+    )
+    return payload
+
+
+def _sync_all_cwa_users(user_db: UserDB) -> dict[str, int]:
+    """Sync all users from the Calibre-Web database into users.db."""
+    if not CWA_DB_PATH or not CWA_DB_PATH.exists():
+        msg = "Calibre-Web database is not available"
+        raise FileNotFoundError(msg)
+
+    db_path = os.fspath(CWA_DB_PATH)
+    db_uri = f"file:{db_path}?mode=ro&immutable=1"
+    conn = sqlite3.connect(db_uri, uri=True)
+    try:
+        cur = conn.cursor()
+        cur.execute("SELECT name, role, email FROM user")
+        rows = cur.fetchall()
+    finally:
+        conn.close()
+
+    return sync_cwa_users_from_rows(user_db, rows)
+
+
+def register_admin_routes(app: Flask, user_db: UserDB) -> None:
+    """Register admin user management routes on the Flask app."""
+
+    def _require_admin(
+        f: Callable[P, ResponseReturnValue],
+    ) -> Callable[P, ResponseReturnValue]:
+        """Require an admin session for admin routes.
+
+        In no-auth mode, everyone has access (is_admin defaults True).
+        In auth-required modes, requires an authenticated session with admin role.
+        Caches the resolved auth_mode in ``g.auth_mode`` for the request.
+        """
+
+        @wraps(f)
+        def decorated(*args: P.args, **kwargs: P.kwargs) -> ResponseReturnValue:
+            auth_mode = load_active_auth_mode(CWA_DB_PATH, user_db=user_db)
+            g.auth_mode = auth_mode
+            if auth_mode != "none":
+                if "user_id" not in session:
+                    return jsonify({"error": "Authentication required"}), 401
+                if not session.get("is_admin", False):
+                    return jsonify({"error": "Admin access required"}), 403
+            return f(*args, **kwargs)
+
+        return decorated
+
+    @app.route("/api/admin/users", methods=["GET"])
+    @_require_admin
+    def admin_list_users() -> Response | tuple[Response, int]:
+        """List all users."""
+        users = user_db.list_users()
+        auth_mode = g.auth_mode
+        return jsonify([_serialize_user(u, auth_mode) for u in users])
+
+    @app.route("/api/admin/users", methods=["POST"])
+    @_require_admin
+    def admin_create_user() -> Response | tuple[Response, int]:
+        """Create a new user with password authentication."""
+        data = request.get_json() or {}
+        auth_mode = g.auth_mode
+
+        username = (data.get("username") or "").strip()
+        password = data.get("password", "")
+        email = (data.get("email") or "").strip() or None
+        display_name = (data.get("display_name") or "").strip() or None
+        role = data.get("role", "user")
+
+        if auth_mode in {AUTH_SOURCE_PROXY, AUTH_SOURCE_CWA}:
+            return jsonify(
+                {
+                    "error": "Local user creation is disabled in this authentication mode",
+                    "message": (
+                        "Users are provisioned by your external authentication source. "
+                        "Switch to builtin or OIDC mode to create local users."
+                    ),
+                }
+            ), 400
+
+        if not username:
+            return jsonify({"error": "Username is required"}), 400
+        if not password or len(password) < MIN_PASSWORD_LENGTH:
+            return jsonify(
+                {"error": f"Password must be at least {MIN_PASSWORD_LENGTH} characters"}
+            ), 400
+        if role not in ("admin", "user"):
+            return jsonify({"error": "Role must be 'admin' or 'user'"}), 400
+
+        # First user is always admin
+        existing_users = user_db.list_users()
+        if not existing_users:
+            role = "admin"
+
+        # Check if username already exists
+        if user_db.get_user(username=username):
+            return jsonify({"error": "Username already exists"}), 409
+
+        password_hash = generate_password_hash(password)
+        try:
+            user = user_db.create_user(
+                username=username,
+                password_hash=password_hash,
+                email=email,
+                display_name=display_name,
+                auth_source=AUTH_SOURCE_BUILTIN,
+                role=role,
+            )
+        except ValueError:
+            return jsonify({"error": "Username already exists"}), 409
+        logger.info(
+            "Shelfmark user created (source=manual_admin_create, created_by=%s, username=%s, role=%s, auth_source=%s)",
+            session.get("user_id", "unknown"),
+            username,
+            role,
+            AUTH_SOURCE_BUILTIN,
+        )
+        return jsonify(
+            _serialize_user(
+                user,
+                g.auth_mode,
+            )
+        ), 201
+
+    @app.route("/api/admin/users/<int:user_id>", methods=["GET"])
+    @_require_admin
+    def admin_get_user(user_id: int) -> Response | tuple[Response, int]:
+        """Get a user by ID with their settings."""
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        result = _serialize_user(
+            user,
+            g.auth_mode,
+        )
+        result["settings"] = user_db.get_user_settings(user_id)
+        return jsonify(result)
+
+    @app.route("/api/admin/users/<int:user_id>", methods=["PUT"])
+    @_require_admin
+    def admin_update_user(user_id: int) -> Response | tuple[Response, int]:
+        """Update user fields and/or settings."""
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        data = request.get_json() or {}
+        auth_source = normalize_auth_source(
+            user.get("auth_source"),
+            user.get("oidc_subject"),
+        )
+        capabilities = _get_user_edit_capabilities(user)
+
+        # Handle optional password update
+        password = data.get("password", "")
+        if password:
+            if not capabilities["canSetPassword"]:
+                return jsonify(
+                    {
+                        "error": f"Cannot set password for {auth_source.upper()} users",
+                        "message": "Password authentication is only available for local users.",
+                    }
+                ), 400
+            if len(password) < MIN_PASSWORD_LENGTH:
+                return jsonify(
+                    {"error": f"Password must be at least {MIN_PASSWORD_LENGTH} characters"}
+                ), 400
+            user_db.update_user(user_id, password_hash=generate_password_hash(password))
+
+        # Update user fields
+        user_fields = {}
+        for field in ("role", "email", "display_name"):
+            if field in data:
+                user_fields[field] = data[field]
+
+        if "role" in user_fields and user_fields["role"] not in ("admin", "user"):
+            return jsonify({"error": "Role must be 'admin' or 'user'"}), 400
+
+        role_changed = "role" in user_fields and user_fields["role"] != user.get("role")
+        email_changed = "email" in user_fields and user_fields["email"] != user.get("email")
+        display_name_changed = "display_name" in user_fields and user_fields[
+            "display_name"
+        ] != user.get("display_name")
+
+        if role_changed and not capabilities["canEditRole"]:
+            if auth_source == AUTH_SOURCE_OIDC:
+                return jsonify(
+                    {
+                        "error": "Cannot change role for OIDC user when group-based authorization is enabled",
+                        "message": _oidc_role_management_message(),
+                    }
+                ), 400
+
+            return jsonify(
+                {
+                    "error": f"Cannot change role for {auth_source.upper()} users",
+                    "message": "Role is managed by the external authentication source.",
+                }
+            ), 400
+
+        if email_changed and not capabilities["canEditEmail"]:
+            if auth_source == AUTH_SOURCE_CWA:
+                return jsonify(
+                    {
+                        "error": "Cannot change email for CWA users",
+                        "message": "Email is synced from Calibre-Web.",
+                    }
+                ), 400
+
+            return jsonify(
+                {
+                    "error": "Cannot change email for OIDC users",
+                    "message": "Email is managed by your identity provider.",
+                }
+            ), 400
+
+        if display_name_changed and not capabilities["canEditDisplayName"]:
+            return jsonify(
+                {
+                    "error": "Cannot change display name for OIDC users",
+                    "message": "Display name is managed by your identity provider.",
+                }
+            ), 400
+
+        # Allow demoting the last admin account.
+        # Auth mode resolution automatically falls back to "none" when no
+        # local password admin remains.
+
+        # Avoid unnecessary writes for no-op field updates.
+        for field in ("role", "email", "display_name"):
+            if field in user_fields and user_fields[field] == user.get(field):
+                user_fields.pop(field)
+
+        if user_fields:
+            user_db.update_user(user_id, **user_fields)
+
+        # Update per-user settings
+        if "settings" in data:
+            if not isinstance(data["settings"], dict):
+                return jsonify({"error": "Settings must be an object"}), 400
+
+            validated_settings, validation_errors = validate_user_settings(data["settings"])
+            if validation_errors:
+                return jsonify(
+                    {
+                        "error": "Invalid settings payload",
+                        "details": validation_errors,
+                    }
+                ), 400
+
+            user_db.set_user_settings(user_id, validated_settings)
+            # Ensure runtime reads see updated per-user overrides immediately.
+            try:
+                app_config.refresh(force=True)
+            except _CONFIG_REFRESH_ERRORS as exc:
+                logger.warning(
+                    "Updated settings for user %s but failed to refresh runtime config: %s",
+                    user_id,
+                    exc,
+                )
+
+        updated = user_db.get_user(user_id=user_id)
+        if not isinstance(updated, dict):
+            return jsonify({"error": "User not found"}), 404
+        result = _serialize_user(
+            updated,
+            g.auth_mode,
+        )
+        result["settings"] = user_db.get_user_settings(user_id)
+        logger.info("Admin updated user %s", user_id)
+        return jsonify(result)
+
+    @app.route("/api/admin/users/sync-cwa", methods=["POST"])
+    @_require_admin
+    def admin_sync_cwa_users() -> Response | tuple[Response, int]:
+        """Manually sync users from Calibre-Web into users.db."""
+        if g.auth_mode != AUTH_SOURCE_CWA:
+            return jsonify(
+                {
+                    "error": "CWA sync is only available when CWA authentication is enabled",
+                }
+            ), 400
+
+        try:
+            summary = _sync_all_cwa_users(user_db)
+        except FileNotFoundError:
+            return jsonify(
+                {
+                    "error": "Calibre-Web database is not available",
+                    "message": "Verify app.db is mounted and readable at /auth/app.db.",
+                }
+            ), 503
+        except Exception:
+            logger.exception("Failed to sync CWA users")
+            return jsonify(
+                {
+                    "error": "Failed to sync users from Calibre-Web",
+                }
+            ), 500
+
+        message = (
+            f"Synced {summary['total']} CWA users "
+            f"({summary['created']} created, {summary['updated']} updated, "
+            f"{summary.get('deleted', 0)} deleted)."
+        )
+        logger.info(message)
+        return jsonify(
+            {
+                "success": True,
+                "message": message,
+                **summary,
+            }
+        )
+
+    register_admin_settings_routes(app, user_db, _require_admin)
+
+    @app.route("/api/admin/users/<int:user_id>", methods=["DELETE"])
+    @_require_admin
+    def admin_delete_user(user_id: int) -> Response | tuple[Response, int]:
+        """Delete a user."""
+        # Prevent self-deletion
+        if session.get("db_user_id") == user_id:
+            return jsonify({"error": "Cannot delete your own account"}), 400
+
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        auth_source = normalize_auth_source(
+            user.get("auth_source"),
+            user.get("oidc_subject"),
+        )
+        if auth_source == AUTH_SOURCE_CWA and auth_source == g.auth_mode:
+            return jsonify(
+                {
+                    "error": f"Cannot delete active {auth_source.upper()} users",
+                    "message": f"{auth_source.upper()} users are automatically re-provisioned on login.",
+                }
+            ), 400
+
+        # Allow deleting the last local admin account.
+        # Auth mode resolution automatically falls back to "none" when no
+        # local password admin remains.
+
+        user_db.delete_user(user_id)
+        logger.info("Admin deleted user %s: %s", user_id, user["username"])
+        return jsonify({"success": True})

shelfmark/core/admin_settings_routes.py

@@ -0,0 +1,310 @@
+"""Admin settings-introspection routes and settings validation helpers."""
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING, Any
+
+from flask import Flask, jsonify, request
+
+from shelfmark.config.notifications_settings import (
+    build_notification_test_result,
+    is_valid_notification_url,
+    normalize_notification_routes,
+)
+from shelfmark.config.users_settings import validate_search_preference_value
+from shelfmark.core.config import config as app_config
+from shelfmark.core.request_policy import parse_policy_mode, validate_policy_rules
+from shelfmark.core.settings_registry import load_config_file
+from shelfmark.core.user_settings_overrides import (
+    build_user_preferences_payload as _build_user_preferences_payload,
+)
+from shelfmark.core.user_settings_overrides import (
+    get_ordered_user_overridable_fields as _get_ordered_user_overridable_fields,
+)
+from shelfmark.core.user_settings_overrides import (
+    get_settings_registry as _get_settings_registry,
+)
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+    from flask.typing import ResponseReturnValue
+
+    from shelfmark.core.user_db import UserDB
+
+
+def validate_user_settings(
+    settings: dict[str, Any],
+) -> tuple[dict[str, Any], list[str]]:
+    """Validate and normalize per-user settings overrides."""
+    settings_registry = _get_settings_registry()
+    field_map = settings_registry.get_settings_field_map()
+    overridable_map = settings_registry.get_user_overridable_fields()
+
+    valid: dict[str, Any] = {}
+    errors: list[str] = []
+    for key, value in settings.items():
+        if key not in field_map:
+            errors.append(f"Unknown setting: {key}")
+        elif key not in overridable_map:
+            errors.append(f"Setting not user-overridable: {key}")
+        else:
+            # null means "clear the per-user override; use global default"
+            if value is None:
+                valid[key] = None
+                continue
+
+            if (
+                key in {"REQUEST_POLICY_DEFAULT_EBOOK", "REQUEST_POLICY_DEFAULT_AUDIOBOOK"}
+                and parse_policy_mode(value) is None
+            ):
+                errors.append(f"Invalid policy mode for {key}: {value}")
+                continue
+
+            if key == "REQUEST_POLICY_RULES":
+                normalized_rules, rule_errors = validate_policy_rules(value)
+                if rule_errors:
+                    errors.extend(rule_errors)
+                    continue
+                valid[key] = normalized_rules
+                continue
+
+            if key == "USER_NOTIFICATION_ROUTES":
+                normalized_routes = normalize_notification_routes(value)
+                invalid_count = sum(
+                    1
+                    for row in normalized_routes
+                    if row.get("url") and not is_valid_notification_url(str(row.get("url")))
+                )
+                if invalid_count:
+                    errors.append(
+                        f"Invalid value for {key}: found {invalid_count} invalid URL(s). "
+                        "Use URL values with a valid scheme, e.g. discord://... or ntfys://..."
+                    )
+                    continue
+                valid[key] = normalized_routes
+                continue
+
+            normalized_search_value, search_validation_error = validate_search_preference_value(
+                key, value
+            )
+            if search_validation_error:
+                errors.append(search_validation_error)
+                continue
+            if key in {
+                "SEARCH_MODE",
+                "METADATA_PROVIDER",
+                "METADATA_PROVIDER_AUDIOBOOK",
+                "DEFAULT_RELEASE_SOURCE",
+                "DEFAULT_RELEASE_SOURCE_AUDIOBOOK",
+            }:
+                valid[key] = normalized_search_value
+                continue
+
+            if key == "DOWNLOAD_TO_BROWSER_CONTENT_TYPES":
+                if not isinstance(value, list):
+                    errors.append(f"Invalid value for {key}: must be a list")
+                    continue
+
+                candidate_values = [
+                    str(entry).strip().lower() for entry in value if str(entry).strip()
+                ]
+                normalized_values: list[str] = []
+                has_invalid_value = False
+                for entry in candidate_values:
+                    if entry not in {"book", "audiobook"}:
+                        errors.append(
+                            f"Invalid value for {key}: unsupported content type '{entry}'"
+                        )
+                        has_invalid_value = True
+                        continue
+                    if entry not in normalized_values:
+                        normalized_values.append(entry)
+
+                if has_invalid_value:
+                    continue
+
+                valid[key] = normalized_values
+                continue
+
+            valid[key] = value
+
+    return valid, errors
+
+
+def build_user_notification_test_response(
+    *,
+    user_id: int,
+    payload: object,
+) -> tuple[dict[str, Any], int]:
+    """Build a notification test response using effective per-user routes."""
+    from shelfmark.core.config import config as app_config
+
+    routes_input = app_config.get("USER_NOTIFICATION_ROUTES", [], user_id=user_id)
+    if isinstance(payload, dict):
+        if "USER_NOTIFICATION_ROUTES" in payload:
+            routes_input = payload.get("USER_NOTIFICATION_ROUTES")
+        elif "routes" in payload:
+            routes_input = payload.get("routes")
+
+    result = build_notification_test_result(routes_input, scope_label="personal")
+    status_code = 200 if result.get("success", False) else 400
+    return result, status_code
+
+
+def register_admin_settings_routes(
+    app: Flask,
+    user_db: UserDB,
+    require_admin: Callable[
+        [Callable[..., ResponseReturnValue]], Callable[..., ResponseReturnValue]
+    ],
+) -> None:
+    """Register admin endpoints for user-specific settings and defaults."""
+
+    @app.route("/api/admin/download-defaults", methods=["GET"])
+    @require_admin
+    def admin_download_defaults() -> ResponseReturnValue:
+        defaults = {
+            key: ("" if (value := app_config.get(key, field.default)) is None else value)
+            for key, field in _get_ordered_user_overridable_fields("downloads")
+        }
+
+        defaults["OIDC_ADMIN_GROUP"] = app_config.get("OIDC_ADMIN_GROUP", "")
+        defaults["OIDC_USE_ADMIN_GROUP"] = app_config.get("OIDC_USE_ADMIN_GROUP", True)
+        defaults["OIDC_AUTO_PROVISION"] = app_config.get("OIDC_AUTO_PROVISION", True)
+        return jsonify(defaults)
+
+    @app.route("/api/admin/booklore-options", methods=["GET"])
+    @require_admin
+    def admin_booklore_options() -> ResponseReturnValue:
+        from shelfmark.core import admin_routes
+
+        return jsonify(
+            {
+                "libraries": admin_routes.get_booklore_library_options(),
+                "paths": admin_routes.get_booklore_path_options(),
+            }
+        )
+
+    @app.route("/api/admin/users/<int:user_id>/delivery-preferences", methods=["GET"])
+    @require_admin
+    def admin_get_delivery_preferences(user_id: int) -> ResponseReturnValue:
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        try:
+            payload = _build_user_preferences_payload(user_db, user_id, "downloads")
+        except ValueError:
+            return jsonify({"error": "Downloads settings tab not found"}), 500
+
+        return jsonify(payload)
+
+    @app.route("/api/admin/users/<int:user_id>/search-preferences", methods=["GET"])
+    @require_admin
+    def admin_get_search_preferences(user_id: int) -> ResponseReturnValue:
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        try:
+            payload = _build_user_preferences_payload(user_db, user_id, "search_mode")
+        except ValueError:
+            return jsonify({"error": "Search mode settings tab not found"}), 500
+
+        return jsonify(payload)
+
+    @app.route("/api/admin/users/<int:user_id>/notification-preferences", methods=["GET"])
+    @require_admin
+    def admin_get_notification_preferences(user_id: int) -> ResponseReturnValue:
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        try:
+            payload = _build_user_preferences_payload(user_db, user_id, "notifications")
+        except ValueError:
+            return jsonify({"error": "Notifications settings tab not found"}), 500
+
+        return jsonify(payload)
+
+    @app.route("/api/admin/users/<int:user_id>/notification-preferences/test", methods=["POST"])
+    @require_admin
+    def admin_test_notification_preferences(user_id: int) -> ResponseReturnValue:
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        payload = request.get_json(silent=True)
+        result, status_code = build_user_notification_test_response(
+            user_id=user_id,
+            payload=payload,
+        )
+        return jsonify(result), status_code
+
+    @app.route("/api/admin/settings/overrides-summary", methods=["GET"])
+    @require_admin
+    def admin_settings_overrides_summary() -> ResponseReturnValue:
+        settings_registry = _get_settings_registry()
+
+        tab_name = (request.args.get("tab") or "downloads").strip()
+        if not settings_registry.get_settings_tab(tab_name):
+            return jsonify({"error": f"Unknown settings tab: {tab_name}"}), 404
+
+        overridable_keys = list(settings_registry.get_user_overridable_fields(tab_name=tab_name))
+        keys_payload: dict[str, dict[str, Any]] = {}
+
+        for user_record in user_db.list_users():
+            user_settings = user_db.get_user_settings(user_record["id"])
+            if not isinstance(user_settings, dict):
+                continue
+
+            for key in overridable_keys:
+                if key not in user_settings or user_settings[key] is None:
+                    continue
+                entry = keys_payload.setdefault(key, {"count": 0, "users": []})
+                entry["users"].append(
+                    {
+                        "userId": user_record["id"],
+                        "username": user_record["username"],
+                        "value": user_settings[key],
+                    }
+                )
+
+        for summary in keys_payload.values():
+            summary["count"] = len(summary["users"])
+
+        return jsonify({"tab": tab_name, "keys": keys_payload})
+
+    @app.route("/api/admin/users/<int:user_id>/effective-settings", methods=["GET"])
+    @require_admin
+    def admin_get_effective_settings(user_id: int) -> ResponseReturnValue:
+        user = user_db.get_user(user_id=user_id)
+        if not user:
+            return jsonify({"error": "User not found"}), 404
+
+        from shelfmark.core.config import config as app_config
+        from shelfmark.core.settings_registry import is_value_from_env
+
+        field_map = _get_settings_registry().get_user_overridable_fields()
+        user_settings = user_db.get_user_settings(user_id)
+        tab_config_cache: dict[str, dict[str, Any]] = {}
+        effective: dict[str, dict[str, Any]] = {}
+
+        for key, (field, tab_name) in sorted(field_map.items()):
+            value = app_config.get(key, field.default, user_id=user_id)
+            source = "default"
+
+            if field.env_supported and is_value_from_env(field):
+                source = "env_var"
+            elif key in user_settings and user_settings[key] is not None:
+                source = "user_override"
+                value = user_settings[key]
+            else:
+                tab_config = tab_config_cache.setdefault(tab_name, load_config_file(tab_name))
+                if key in tab_config:
+                    source = "global_config"
+
+            effective[key] = {"value": value, "source": source}
+
+        return jsonify(effective)

shelfmark/core/auth_modes.py

@@ -0,0 +1,179 @@
+"""Authentication mode, auth-source normalization, and admin access policy helpers."""
+
+from __future__ import annotations
+
+import os
+import sqlite3
+from pathlib import Path
+from typing import TYPE_CHECKING, Any, Protocol, TypeGuard
+
+if TYPE_CHECKING:
+    from collections.abc import Mapping
+
+AUTH_SOURCE_BUILTIN = "builtin"
+AUTH_SOURCE_OIDC = "oidc"
+AUTH_SOURCE_PROXY = "proxy"
+AUTH_SOURCE_CWA = "cwa"
+AUTH_SOURCES = (
+    AUTH_SOURCE_BUILTIN,
+    AUTH_SOURCE_OIDC,
+    AUTH_SOURCE_PROXY,
+    AUTH_SOURCE_CWA,
+)
+AUTH_SOURCE_SET = frozenset(AUTH_SOURCES)
+_ALWAYS_ADMIN_SETTINGS_TABS = frozenset({"security", "users"})
+
+
+class _UserDBWithAdminPassword(Protocol):
+    """Minimal user DB surface needed for local-admin checks."""
+
+    def has_admin_with_password(self) -> bool: ...
+
+
+def _has_admin_password_api(candidate: object) -> TypeGuard[_UserDBWithAdminPassword]:
+    """Return True when *candidate* exposes the admin-password lookup we need."""
+    return callable(getattr(candidate, "has_admin_with_password", None))
+
+
+def has_local_password_admin(user_db: object | None = None) -> bool:
+    """Return True when at least one local admin with a password exists."""
+    try:
+        db = user_db
+        if db is None:
+            from shelfmark.core.user_db import UserDB
+
+            config_root = os.environ.get("CONFIG_DIR", "/config")
+            db = UserDB(str(Path(config_root) / "users.db"))
+            db.initialize()
+
+        if not _has_admin_password_api(db):
+            return False
+        return db.has_admin_with_password()
+    except AttributeError, ImportError, OSError, RuntimeError, TypeError, ValueError, sqlite3.Error:
+        return False
+
+
+def normalize_auth_source(
+    source: object,
+    oidc_subject: object = None,
+) -> str:
+    """Resolve a stable auth source value from persisted fields."""
+    normalized = str(source or "").strip().lower()
+    if normalized in AUTH_SOURCE_SET:
+        return normalized
+    if oidc_subject:
+        return AUTH_SOURCE_OIDC
+    return AUTH_SOURCE_BUILTIN
+
+
+def determine_auth_mode(
+    security_config: Mapping[str, Any],
+    cwa_db_path: object | None,
+    *,
+    has_local_admin: bool = True,
+    disable_local_auth: bool = False,
+) -> str:
+    """Determine active auth mode from security config and runtime prerequisites."""
+    auth_mode = security_config.get("AUTH_METHOD", "none")
+    local_admin_available = has_local_admin or disable_local_auth
+
+    if auth_mode == AUTH_SOURCE_CWA and cwa_db_path:
+        return AUTH_SOURCE_CWA
+
+    if auth_mode == AUTH_SOURCE_BUILTIN and local_admin_available:
+        return AUTH_SOURCE_BUILTIN
+
+    if auth_mode == AUTH_SOURCE_PROXY and security_config.get("PROXY_AUTH_USER_HEADER"):
+        return AUTH_SOURCE_PROXY
+
+    if (
+        auth_mode == AUTH_SOURCE_OIDC
+        and local_admin_available
+        and security_config.get("OIDC_DISCOVERY_URL")
+        and security_config.get("OIDC_CLIENT_ID")
+    ):
+        return AUTH_SOURCE_OIDC
+
+    return "none"
+
+
+def load_active_auth_mode(
+    cwa_db_path: object | None,
+    *,
+    user_db: object | None = None,
+) -> str:
+    """Resolve active auth mode using current security config and runtime prerequisites."""
+    try:
+        from shelfmark.config.env import DISABLE_LOCAL_AUTH
+        from shelfmark.core.config import config as app_config
+
+        security_config = {
+            "AUTH_METHOD": app_config.get("AUTH_METHOD", "none"),
+            "PROXY_AUTH_USER_HEADER": app_config.get("PROXY_AUTH_USER_HEADER", ""),
+            "OIDC_DISCOVERY_URL": app_config.get("OIDC_DISCOVERY_URL", ""),
+            "OIDC_CLIENT_ID": app_config.get("OIDC_CLIENT_ID", ""),
+        }
+        return determine_auth_mode(
+            security_config,
+            cwa_db_path,
+            has_local_admin=has_local_password_admin(user_db),
+            disable_local_auth=DISABLE_LOCAL_AUTH,
+        )
+    except ImportError, OSError, RuntimeError, TypeError, ValueError, sqlite3.Error:
+        return "none"
+
+
+def is_user_active_for_auth_mode(user: Mapping[str, Any], auth_mode: str) -> bool:
+    """Return whether a user can authenticate under the current auth mode."""
+    source = normalize_auth_source(user.get("auth_source"), user.get("oidc_subject"))
+    if source == AUTH_SOURCE_BUILTIN:
+        return auth_mode in (AUTH_SOURCE_BUILTIN, AUTH_SOURCE_OIDC)
+    return source == auth_mode
+
+
+def is_settings_or_onboarding_path(path: str) -> bool:
+    """Return True when request path targets protected admin settings routes."""
+    return path.startswith(("/api/settings", "/api/onboarding"))
+
+
+def get_settings_tab_from_path(path: str) -> str | None:
+    """Extract tab name from /api/settings/<tab>[...] paths."""
+    if not path.startswith("/api/settings/"):
+        return None
+
+    suffix = path[len("/api/settings/") :]
+    if not suffix:
+        return None
+
+    return suffix.split("/", 1)[0] or None
+
+
+def should_restrict_settings_to_admin(
+    _users_config: Mapping[str, Any],
+) -> bool:
+    """Settings/onboarding is always admin-only."""
+    return True
+
+
+def requires_admin_for_settings_access(
+    path: str,
+    users_config: Mapping[str, Any],
+) -> bool:
+    """Return whether this settings/onboarding request requires admin privileges."""
+    tab_name = get_settings_tab_from_path(path)
+    if tab_name in _ALWAYS_ADMIN_SETTINGS_TABS:
+        return True
+
+    return should_restrict_settings_to_admin(users_config)
+
+
+def get_auth_check_admin_status(
+    _auth_mode: str,
+    _users_config: Mapping[str, Any],
+    session_data: Mapping[str, Any],
+) -> bool:
+    """Resolve /api/auth/check `is_admin` as the session's real admin role."""
+    if "user_id" not in session_data:
+        return False
+
+    return bool(session_data.get("is_admin", False))

shelfmark/core/cache.py

@@ -0,0 +1,188 @@
+"""Thread-safe in-memory cache with TTL support."""
+
+import threading
+import time
+from dataclasses import dataclass
+from functools import wraps
+from typing import TYPE_CHECKING, ParamSpec, TypeVar, cast
+
+from shelfmark.core.logger import setup_logger
+
+if TYPE_CHECKING:
+    from collections.abc import Callable
+
+logger = setup_logger(__name__)
+
+P = ParamSpec("P")
+R = TypeVar("R")
+
+
+@dataclass
+class CacheEntry:
+    """A cached value with expiration time."""
+
+    value: object
+    expires_at: float
+
+
+class CacheService:
+    """Thread-safe in-memory cache with TTL support."""
+
+    def __init__(self, max_size: int = 1000) -> None:
+        """Initialize cache with max_size entries before eviction."""
+        self._cache: dict[str, CacheEntry] = {}
+        self._lock = threading.Lock()
+        self._max_size = max_size
+
+    def get(self, key: str) -> object | None:
+        """Get cached value if not expired."""
+        with self._lock:
+            entry = self._cache.get(key)
+            if entry is None:
+                return None
+
+            if time.time() > entry.expires_at:
+                del self._cache[key]
+                return None
+
+            return entry.value
+
+    def set(self, key: str, value: object, ttl: int) -> None:
+        """Cache value with TTL in seconds."""
+        with self._lock:
+            # Evict oldest entries if at capacity
+            if len(self._cache) >= self._max_size:
+                self._evict_oldest()
+
+            self._cache[key] = CacheEntry(value=value, expires_at=time.time() + ttl)
+
+    def invalidate(self, key: str) -> bool:
+        """Remove specific cache entry. Returns True if found."""
+        with self._lock:
+            if key in self._cache:
+                del self._cache[key]
+                return True
+            return False
+
+    def invalidate_prefix(self, prefix: str) -> int:
+        """Remove all cache entries whose keys start with prefix."""
+        with self._lock:
+            matching_keys = [key for key in self._cache if key.startswith(prefix)]
+            for key in matching_keys:
+                del self._cache[key]
+            return len(matching_keys)
+
+    def clear(self) -> None:
+        """Clear all cache entries."""
+        with self._lock:
+            self._cache.clear()
+
+    def cleanup_expired(self) -> int:
+        """Remove all expired entries. Returns count removed."""
+        with self._lock:
+            now = time.time()
+            expired_keys = [key for key, entry in self._cache.items() if entry.expires_at < now]
+            for key in expired_keys:
+                del self._cache[key]
+            return len(expired_keys)
+
+    def _evict_oldest(self) -> None:
+        """Evict ~10% of oldest entries. Called with lock held."""
+        if not self._cache:
+            return
+
+        # Remove ~10% of entries, oldest first
+        entries_to_remove = max(1, len(self._cache) // 10)
+        sorted_entries = sorted(self._cache.items(), key=lambda x: x[1].expires_at)
+
+        for key, _ in sorted_entries[:entries_to_remove]:
+            del self._cache[key]
+
+    def stats(self) -> dict[str, int]:
+        """Get cache statistics (size, max_size)."""
+        with self._lock:
+            return {"size": len(self._cache), "max_size": self._max_size}
+
+
+# Global cache instance for metadata providers
+_metadata_cache = CacheService(max_size=1000)
+
+
+def get_metadata_cache() -> CacheService:
+    """Get the global metadata cache instance."""
+    return _metadata_cache
+
+
+def cache_key(*args: object, **kwargs: object) -> str:
+    """Generate cache key from arguments."""
+    parts = [str(arg) for arg in args]
+    parts.extend(f"{k}={v}" for k, v in sorted(kwargs.items()))
+    return ":".join(parts)
+
+
+def _coerce_ttl_seconds(value: object, *, default: int) -> int:
+    """Normalize cache TTL values read from config or decorator arguments."""
+    if isinstance(value, bool):
+        return default
+    if isinstance(value, int):
+        return value if value > 0 else default
+    if isinstance(value, str):
+        stripped = value.strip()
+        if stripped.isdigit():
+            parsed = int(stripped)
+            return parsed if parsed > 0 else default
+    return default
+
+
+def cacheable(
+    ttl: int | None = None,
+    ttl_key: str | None = None,
+    ttl_default: int = 300,
+    key_prefix: str = "",
+) -> Callable[[Callable[P, R]], Callable[P, R]]:
+    """Cache function results with a static or config-backed TTL."""
+
+    def decorator(func: Callable[P, R]) -> Callable[P, R]:
+        @wraps(func)
+        def wrapper(*args: P.args, **kwargs: P.kwargs) -> R:
+            # Check if metadata caching is enabled
+            from shelfmark.core.config import config
+
+            if not config.get("METADATA_CACHE_ENABLED", True):
+                # Caching disabled, execute function directly
+                return func(*args, **kwargs)
+
+            # Determine TTL: static or from config
+            if ttl is not None:
+                effective_ttl = ttl
+            elif ttl_key:
+                effective_ttl = _coerce_ttl_seconds(
+                    config.get(ttl_key, ttl_default),
+                    default=ttl_default,
+                )
+            else:
+                effective_ttl = ttl_default
+
+            # Generate cache key from function name and arguments
+            # Skip 'self' argument if present (first arg of method)
+            cache_args = args[1:] if args and hasattr(args[0], func.__name__) else args
+
+            key = cache_key(key_prefix or func.__name__, *cache_args, **kwargs)
+
+            # Check cache
+            cached = _metadata_cache.get(key)
+            if cached is not None:
+                return cast("R", cached)
+
+            # Execute function and cache result
+            result = func(*args, **kwargs)
+
+            # Only cache non-None results
+            if result is not None:
+                _metadata_cache.set(key, result, effective_ttl)
+
+            return result
+
+        return wrapper
+
+    return decorator

shelfmark/core/config.py

@@ -0,0 +1,289 @@
+"""Configuration singleton with ENV > config file > default resolution."""
+
+import os
+import sqlite3
+import time
+from importlib import import_module
+from pathlib import Path
+from threading import Lock
+from typing import TYPE_CHECKING, Any, Self
+
+if TYPE_CHECKING:
+    from types import ModuleType
+
+    from shelfmark.core.user_db import UserDB
+
+# Import lazily to avoid circular imports
+_registry_module = None
+_env_module = None
+_user_db_module = None
+
+_SETTINGS_REFRESH_COOLDOWN_SECONDS = 0.05
+
+
+def _get_registry() -> ModuleType:
+    """Lazy import of settings registry to avoid circular imports."""
+    global _registry_module
+    if _registry_module is None:
+        from shelfmark.core import settings_registry
+
+        _registry_module = settings_registry
+    return _registry_module
+
+
+def _get_env() -> ModuleType:
+    """Lazy import of env module for fallback values."""
+    global _env_module
+    if _env_module is None:
+        from shelfmark.config import env
+
+        _env_module = env
+    return _env_module
+
+
+def _get_user_db_module() -> type[UserDB]:
+    """Lazy import of user DB module to avoid optional dependency loops."""
+    global _user_db_module
+    if _user_db_module is None:
+        from shelfmark.core.user_db import UserDB
+
+        _user_db_module = UserDB
+    return _user_db_module
+
+
+class Config:
+    """Dynamic configuration singleton that provides live settings access.
+
+    Settings are resolved with priority: ENV var > config file > default.
+    Values are cached for performance and can be refreshed when settings change.
+    """
+
+    _instance: Self | None = None
+    _lock = Lock()
+
+    def __new__(cls) -> Self:
+        """Return the shared configuration singleton instance."""
+        if cls._instance is None:
+            with cls._lock:
+                if cls._instance is None:
+                    cls._instance = super().__new__(cls)
+                    cls._instance._initialized = False
+        instance = cls._instance
+        if instance is None:
+            msg = "Config singleton failed to initialize"
+            raise RuntimeError(msg)
+        return instance
+
+    def __init__(self) -> None:
+        """Initialize caches and backing stores for the singleton."""
+        if self._initialized:
+            return
+        self._cache: dict[str, Any] = {}
+        self._field_map: dict[str, tuple] = {}  # key -> (field, tab_name)
+        self._cache_lock = Lock()
+        self._user_settings_cache: dict[int, dict[str, Any]] = {}
+        self._user_settings_cache_lock = Lock()
+        self._user_db = None
+        self._user_db_load_attempted = False
+        self._initialized = True
+        self._loaded = False
+        self._last_refresh_time: float = 0.0
+
+    def _ensure_loaded(self) -> None:
+        """Ensure settings are loaded from the registry."""
+        if self._loaded:
+            return
+        with self._cache_lock:
+            if self._loaded:
+                return
+            self._load_settings()
+
+    def _load_settings(self) -> None:
+        """Load all settings from the registry."""
+        # Ensure all settings modules are imported before loading
+        # This handles cases where config is accessed before settings are registered
+        try:
+            import_module("shelfmark.config.notifications_settings")
+            import_module("shelfmark.config.security")
+            import_module("shelfmark.config.settings")
+            import_module("shelfmark.config.users_settings")
+            import_module("shelfmark.metadata_providers")
+            import_module("shelfmark.release_sources")
+        except ImportError:
+            pass
+
+        registry = _get_registry()
+
+        # On first load, sync ENV values to config files
+        # This ensures ENV values persist even if ENV vars are later removed
+        if not hasattr(self, "_env_synced"):
+            registry.sync_env_to_config()
+            self._env_synced = True
+
+        # Build field map from all registered tabs
+        self._field_map.clear()
+        self._cache.clear()
+
+        for key, (field, tab_name) in registry.get_settings_field_map().items():
+            self._field_map[key] = (field, tab_name)
+            self._cache[key] = registry.get_setting_value(field, tab_name)
+
+        self._loaded = True
+
+    def refresh(self, *, force: bool = False) -> None:
+        """Refresh all cached settings from config files.
+
+        Call this after settings are updated via the UI to ensure
+        the config singleton reflects the new values.
+
+        Multiple calls within a short window (50 ms) are coalesced to
+        avoid redundant disk I/O when several helpers each call refresh()
+        during the same request.  Pass ``force=True`` to bypass the guard
+        (e.g. after a settings write).
+        """
+        now = time.monotonic()
+        if not force and (now - self._last_refresh_time) < _SETTINGS_REFRESH_COOLDOWN_SECONDS:
+            return
+
+        with self._cache_lock:
+            self._loaded = False
+            self._load_settings()
+        with self._user_settings_cache_lock:
+            self._user_settings_cache.clear()
+        self._user_db = None
+        self._user_db_load_attempted = False
+        self._last_refresh_time = time.monotonic()
+
+    def _get_user_db(self) -> UserDB | None:
+        """Get or initialize a UserDB handle if available."""
+        if self._user_db is not None:
+            return self._user_db
+        if self._user_db_load_attempted:
+            return None
+
+        self._user_db_load_attempted = True
+        try:
+            user_db_cls = _get_user_db_module()
+            db_path = str(Path(os.environ.get("CONFIG_DIR", "/config")) / "users.db")
+            user_db = user_db_cls(db_path)
+            user_db.initialize()
+        except ImportError, OSError, sqlite3.Error:
+            # Multi-user support is optional; fall back to global config when unavailable.
+            return None
+        else:
+            self._user_db = user_db
+            return self._user_db
+
+    def _get_user_settings(self, user_id: int) -> dict[str, Any]:
+        """Get cached per-user settings from user DB."""
+        with self._user_settings_cache_lock:
+            if user_id in self._user_settings_cache:
+                return self._user_settings_cache[user_id]
+
+        user_db = self._get_user_db()
+        if user_db is None:
+            return {}
+
+        try:
+            settings = user_db.get_user_settings(user_id)
+        except sqlite3.OperationalError, OSError, ValueError, TypeError:
+            return {}
+
+        if not isinstance(settings, dict):
+            settings = {}
+
+        with self._user_settings_cache_lock:
+            self._user_settings_cache[user_id] = settings
+        return settings
+
+    def _get_user_override(self, user_id: int, key: str) -> object:
+        """Get a user override for a specific key."""
+        user_settings = self._get_user_settings(user_id)
+        return user_settings.get(key)
+
+    def get(self, key: str, default: object = None, user_id: int | None = None) -> object:
+        """Get a setting value by key.
+
+        Args:
+            key: The setting key (e.g., 'MAX_RETRY')
+            default: Default value if setting not found
+            user_id: Optional DB user ID for per-user setting overrides
+
+        Returns:
+            The setting value, or default if not found
+
+        """
+        self._ensure_loaded()
+
+        if key in self._field_map:
+            field, _ = self._field_map[key]
+            registry = _get_registry()
+
+            # Deployment-level ENV values always win.
+            if field.env_supported and registry.is_value_from_env(field):
+                return self._cache.get(key, default)
+
+            # User overrides are only available for explicitly overridable fields.
+            if user_id is not None and getattr(field, "user_overridable", False):
+                user_value = self._get_user_override(user_id, key)
+                if user_value is not None:
+                    return user_value
+
+        return self._cache.get(key, default)
+
+    def __getattr__(self, name: str) -> object:
+        """Allow attribute-style access to settings.
+
+        Example: config.MAX_RETRY instead of config.get('MAX_RETRY')
+        """
+        # Avoid recursion for internal attributes
+        if name.startswith("_"):
+            msg = f"'{type(self).__name__}' object has no attribute '{name}'"
+            raise AttributeError(msg)
+
+        self._ensure_loaded()
+
+        if name in self._cache:
+            return self._cache[name]
+
+        # Fallback to env module for settings not in registry
+        # This ensures backward compatibility during migration
+        env = _get_env()
+        if hasattr(env, name):
+            return getattr(env, name)
+
+        msg = f"Setting '{name}' not found in config or env"
+        raise AttributeError(msg)
+
+    def is_from_env(self, key: str) -> bool:
+        """Check if a setting's value comes from an environment variable.
+
+        Args:
+            key: The setting key
+
+        Returns:
+            True if the value is set via ENV var, False otherwise
+
+        """
+        self._ensure_loaded()
+
+        if key not in self._field_map:
+            return False
+
+        field, _ = self._field_map[key]
+        registry = _get_registry()
+        return registry.is_value_from_env(field)
+
+    def get_all(self) -> dict[str, Any]:
+        """Get all cached settings as a dictionary.
+
+        Returns:
+            Dict of all setting keys to their current values
+
+        """
+        self._ensure_loaded()
+        return dict(self._cache)
+
+
+# Global singleton instance
+config = Config()

shelfmark/core/cwa_user_sync.py

@@ -0,0 +1,102 @@
+"""Helpers for provisioning and syncing Calibre-Web users into users.db."""
+
+from __future__ import annotations
+
+from typing import TYPE_CHECKING, Any
+
+from shelfmark.core.auth_modes import AUTH_SOURCE_CWA, normalize_auth_source
+from shelfmark.core.external_user_linking import upsert_external_user
+
+if TYPE_CHECKING:
+    from collections.abc import Iterable
+
+    from shelfmark.core.user_db import UserDB
+
+_CWA_ALIAS_SUFFIX = "__cwa"
+
+
+def _normalize_email(value: object) -> str | None:
+    if value is None:
+        return None
+    email = str(value).strip()
+    return email or None
+
+
+def upsert_cwa_user(
+    user_db: UserDB,
+    cwa_username: str,
+    cwa_email: str | None,
+    role: str,
+    context: str | None = None,
+) -> tuple[dict[str, Any], str]:
+    """Create/update a CWA-backed user with collision-safe matching."""
+    normalized_email = _normalize_email(cwa_email)
+    collision_strategy = "alias" if normalized_email else "takeover"
+    user, action = upsert_external_user(
+        user_db,
+        auth_source="cwa",
+        username=cwa_username,
+        email=normalized_email,
+        role=role,
+        allow_email_link=True,
+        collision_strategy=collision_strategy,
+        alias_suffix=_CWA_ALIAS_SUFFIX,
+        context=context,
+    )
+    if user is None:
+        msg = "Unexpected CWA user sync result: no user returned"
+        raise RuntimeError(msg)
+    return user, action
+
+
+def sync_cwa_users_from_rows(
+    user_db: UserDB,
+    rows: Iterable[tuple[Any, Any, Any]],
+) -> dict[str, int]:
+    """Sync CWA users from raw `(name, role_flags, email)` rows."""
+    created = 0
+    updated = 0
+    active_cwa_user_ids: set[int] = set()
+    for username, role_flags, email in rows:
+        normalized_username = str(username or "").strip()
+        if not normalized_username:
+            continue
+
+        role = "admin" if (int(role_flags or 0) & 1) == 1 else "user"
+        user, action = upsert_cwa_user(
+            user_db,
+            cwa_username=normalized_username,
+            cwa_email=_normalize_email(email),
+            role=role,
+            context="cwa_manual_sync",
+        )
+        active_cwa_user_ids.add(int(user["id"]))
+        if action == "created":
+            created += 1
+        else:
+            updated += 1
+
+    deleted = 0
+    for existing_user in user_db.list_users():
+        if (
+            normalize_auth_source(
+                existing_user.get("auth_source"),
+                existing_user.get("oidc_subject"),
+            )
+            != AUTH_SOURCE_CWA
+        ):
+            continue
+
+        existing_id = int(existing_user.get("id") or 0)
+        if existing_id in active_cwa_user_ids:
+            continue
+
+        user_db.delete_user(existing_id)
+        deleted += 1
+
+    return {
+        "created": created,
+        "updated": updated,
+        "deleted": deleted,
+        "total": created + updated,
+    }

shelfmark/core/download_history_service.py

@@ -0,0 +1,433 @@
+"""Persistence helpers for canonical download activity rows."""
+
+from __future__ import annotations
+
+import json
+import sqlite3
+import threading
+from datetime import UTC, datetime
+from pathlib import Path
+from typing import Any, SupportsIndex, SupportsInt, TypeGuard
+
+from shelfmark.core.logger import setup_logger
+from shelfmark.core.models import TERMINAL_QUEUE_STATUSES
+from shelfmark.core.request_helpers import (
+    normalize_optional_positive_int,
+    normalize_optional_text,
+    now_utc_iso,
+)
+
+logger = setup_logger(__name__)
+
+
+VALID_TERMINAL_STATUSES = frozenset(s.value for s in TERMINAL_QUEUE_STATUSES)
+ACTIVE_DOWNLOAD_STATUS = "active"
+VALID_ORIGINS = frozenset({"direct", "requested"})
+
+
+def _is_convertible_to_int(
+    value: object,
+) -> TypeGuard[str | bytes | bytearray | SupportsInt | SupportsIndex]:
+    """Return True when *value* can be safely passed to ``int``."""
+    return (
+        isinstance(value, (str, bytes, bytearray))
+        or hasattr(value, "__int__")
+        or hasattr(value, "__index__")
+    )
+
+
+def _coerce_int_value(value: object) -> int:
+    """Normalize int-like values and raise TypeError for unsupported inputs."""
+    if isinstance(value, bool) or not _is_convertible_to_int(value):
+        msg = "limit must be an integer"
+        raise TypeError(msg)
+    return int(value)
+
+
+def _normalize_task_id(task_id: object) -> str:
+    normalized = normalize_optional_text(task_id)
+    if normalized is None:
+        msg = "task_id must be a non-empty string"
+        raise ValueError(msg)
+    return normalized
+
+
+def _normalize_origin(origin: object) -> str:
+    normalized = normalize_optional_text(origin)
+    if normalized is None:
+        return "direct"
+    lowered = normalized.lower()
+    if lowered not in VALID_ORIGINS:
+        msg = "origin must be one of: direct, requested"
+        raise ValueError(msg)
+    return lowered
+
+
+def _normalize_final_status(final_status: object) -> str:
+    normalized = normalize_optional_text(final_status)
+    if normalized is None:
+        msg = "final_status must be a non-empty string"
+        raise ValueError(msg)
+    lowered = normalized.lower()
+    if lowered not in VALID_TERMINAL_STATUSES:
+        msg = "final_status must be one of: complete, error, cancelled"
+        raise ValueError(msg)
+    return lowered
+
+
+def _normalize_limit(value: object, *, default: int, minimum: int, maximum: int) -> int:
+    if value is None:
+        return default
+    try:
+        parsed = _coerce_int_value(value)
+    except (TypeError, ValueError) as exc:
+        msg = "limit must be an integer"
+        raise ValueError(msg) from exc
+    if parsed < minimum:
+        return minimum
+    if parsed > maximum:
+        return maximum
+    return parsed
+
+
+class DownloadHistoryService:
+    """Service for persisted canonical download activity rows."""
+
+    def __init__(self, db_path: str) -> None:
+        """Initialize the service with the SQLite history database path."""
+        self._db_path = db_path
+        self._lock = threading.Lock()
+
+    def _connect(self) -> sqlite3.Connection:
+        conn = sqlite3.connect(self._db_path)
+        conn.row_factory = sqlite3.Row
+        conn.execute("PRAGMA foreign_keys = ON")
+        return conn
+
+    @classmethod
+    def _normalize_row_dict(cls, row: dict[str, Any] | None) -> dict[str, Any] | None:
+        if row is None:
+            return None
+        normalized = dict(row)
+        normalized["retry_payload"] = cls._deserialize_retry_payload(
+            normalized.get("retry_payload")
+        )
+        return normalized
+
+    @classmethod
+    def _row_to_dict(cls, row: sqlite3.Row | None) -> dict[str, Any] | None:
+        return cls._normalize_row_dict(dict(row) if row is not None else None)
+
+    @staticmethod
+    def _to_item_key(task_id: str) -> str:
+        return f"download:{task_id}"
+
+    @staticmethod
+    def _resolve_existing_download_path(value: object) -> str | None:
+        normalized = normalize_optional_text(value)
+        if normalized is None:
+            return None
+        return normalized if Path(normalized).exists() else None
+
+    @staticmethod
+    def _serialize_retry_payload(payload: object) -> str | None:
+        if payload is None:
+            return None
+        try:
+            return json.dumps(payload, ensure_ascii=False, separators=(",", ":"))
+        except (TypeError, ValueError) as exc:
+            msg = "retry_payload must be JSON-serializable"
+            raise ValueError(msg) from exc
+
+    @staticmethod
+    def _deserialize_retry_payload(value: object) -> dict[str, Any] | None:
+        if isinstance(value, dict):
+            return dict(value)
+        normalized = normalize_optional_text(value)
+        if normalized is None:
+            return None
+        try:
+            parsed = json.loads(normalized)
+        except json.JSONDecodeError:
+            return None
+        return parsed if isinstance(parsed, dict) else None
+
+    @staticmethod
+    def _has_staged_retry_source(retry_payload: dict[str, Any]) -> bool:
+        staged_path = retry_payload.get("staged_path")
+        normalized_staged_path = normalize_optional_text(staged_path)
+        if normalized_staged_path is None:
+            return False
+        return Path(normalized_staged_path).exists()
+
+    @staticmethod
+    def _can_retry_without_staged_source(retry_payload: dict[str, Any]) -> bool:
+        return bool(retry_payload.get("can_retry_without_staged_source", True))
+
+    @staticmethod
+    def is_retry_available(row: dict[str, Any]) -> bool:
+        """Return whether a persisted download row can be retried."""
+        final_status = (
+            str(row.get("retry_final_status") or row.get("final_status") or "").strip().lower()
+        )
+        retry_payload = DownloadHistoryService._deserialize_retry_payload(row.get("retry_payload"))
+        if retry_payload is None:
+            return False
+
+        has_staged_retry_source = DownloadHistoryService._has_staged_retry_source(retry_payload)
+        can_retry_without_staged_source = DownloadHistoryService._can_retry_without_staged_source(
+            retry_payload
+        )
+        request_id = normalize_optional_positive_int(row.get("request_id"), "request_id")
+        if request_id is None:
+            if final_status in {ACTIVE_DOWNLOAD_STATUS, "cancelled"}:
+                return can_retry_without_staged_source
+            if final_status == "error":
+                return has_staged_retry_source or can_retry_without_staged_source
+            return False
+
+        if final_status in {ACTIVE_DOWNLOAD_STATUS, "cancelled"}:
+            return can_retry_without_staged_source
+
+        if final_status != "error":
+            return False
+
+        return has_staged_retry_source
+
+    @staticmethod
+    def to_download_payload(row: dict[str, Any]) -> dict[str, Any]:
+        """Build the sidebar/history download payload for a persisted row."""
+        return {
+            "id": row.get("task_id"),
+            "title": row.get("title"),
+            "author": row.get("author"),
+            "format": row.get("format"),
+            "size": row.get("size"),
+            "preview": row.get("preview"),
+            "content_type": row.get("content_type"),
+            "source": row.get("source"),
+            "source_display_name": row.get("source_display_name"),
+            "status_message": row.get("status_message"),
+            "download_path": DownloadHistoryService._resolve_existing_download_path(
+                row.get("download_path")
+            ),
+            "added_time": DownloadHistoryService._iso_to_epoch(row.get("queued_at")),
+            "user_id": row.get("user_id"),
+            "username": row.get("username"),
+            "request_id": row.get("request_id"),
+            "retry_available": DownloadHistoryService.is_retry_available(row),
+        }
+
+    @staticmethod
+    def _iso_to_epoch(value: object) -> float | None:
+        if not isinstance(value, str) or not value.strip():
+            return None
+        normalized = value.strip().replace("Z", "+00:00")
+        try:
+            parsed = datetime.fromisoformat(normalized)
+        except ValueError:
+            return None
+        if parsed.tzinfo is None:
+            parsed = parsed.replace(tzinfo=UTC)
+        return parsed.timestamp()
+
+    @classmethod
+    def to_history_row(cls, row: dict[str, Any], *, dismissed_at: str) -> dict[str, Any]:
+        """Build the activity-history payload for a persisted download row."""
+        task_id = str(row.get("task_id") or "").strip()
+        item_key = cls._to_item_key(task_id)
+        download_payload = cls.to_download_payload(row)
+        # Clear stale progress messages for non-error terminal states.
+        if row.get("final_status") in ("complete", "cancelled"):
+            download_payload["status_message"] = None
+        return {
+            "id": item_key,
+            "user_id": row.get("user_id"),
+            "item_type": "download",
+            "item_key": item_key,
+            "dismissed_at": dismissed_at,
+            "snapshot": {
+                "kind": "download",
+                "download": download_payload,
+            },
+            "origin": row.get("origin"),
+            "final_status": row.get("final_status"),
+            "terminal_at": row.get("terminal_at"),
+            "request_id": row.get("request_id"),
+            "source_id": task_id or None,
+        }
+
+    def record_download(
+        self,
+        *,
+        task_id: str,
+        user_id: int | None,
+        username: str | None,
+        request_id: int | None,
+        source: str,
+        source_display_name: str | None,
+        title: str,
+        author: str | None,
+        file_format: str | None,
+        size: str | None,
+        preview: str | None,
+        content_type: str | None,
+        origin: str,
+        retry_payload: dict[str, Any] | None = None,
+    ) -> None:
+        """Record a download at queue time with final_status='active'.
+
+        On first queue: inserts a new row.
+        On retry (row already exists): resets the row back to 'active'
+        so the normal finalize path works when the retry completes.
+        """
+        normalized_task_id = _normalize_task_id(task_id)
+        normalized_user_id = normalize_optional_positive_int(user_id, "user_id")
+        normalized_request_id = normalize_optional_positive_int(request_id, "request_id")
+        normalized_source = normalize_optional_text(source)
+        if normalized_source is None:
+            msg = "source must be a non-empty string"
+            raise ValueError(msg)
+        normalized_title = normalize_optional_text(title)
+        if normalized_title is None:
+            msg = "title must be a non-empty string"
+            raise ValueError(msg)
+        normalized_origin = _normalize_origin(origin)
+        normalized_retry_payload = self._serialize_retry_payload(retry_payload)
+        recorded_at = now_utc_iso()
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                conn.execute(
+                    """
+                INSERT INTO download_history (
+                    task_id, user_id, username, request_id,
+                    source, source_display_name,
+                    title, author, format, size, preview, content_type,
+                    origin, final_status,
+                    status_message, download_path, retry_payload,
+                    queued_at, terminal_at
+                )
+                VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 'active', NULL, NULL, ?, ?, ?)
+                ON CONFLICT(task_id) DO UPDATE SET
+                    final_status = 'active',
+                    status_message = NULL,
+                    download_path = NULL,
+                    retry_payload = excluded.retry_payload,
+                    terminal_at = ?
+                """,
+                    (
+                        normalized_task_id,
+                        normalized_user_id,
+                        normalize_optional_text(username),
+                        normalized_request_id,
+                        normalized_source,
+                        normalize_optional_text(source_display_name),
+                        normalized_title,
+                        normalize_optional_text(author),
+                        normalize_optional_text(file_format),
+                        normalize_optional_text(size),
+                        normalize_optional_text(preview),
+                        normalize_optional_text(content_type),
+                        normalized_origin,
+                        normalized_retry_payload,
+                        recorded_at,
+                        recorded_at,
+                        recorded_at,
+                    ),
+                )
+                conn.commit()
+            finally:
+                conn.close()
+
+    def finalize_download(
+        self,
+        *,
+        task_id: str,
+        final_status: str,
+        status_message: str | None = None,
+        download_path: str | None = None,
+        retry_payload: dict[str, Any] | None = None,
+    ) -> None:
+        """Update an existing download row to its terminal state."""
+        normalized_task_id = _normalize_task_id(task_id)
+        normalized_final_status = _normalize_final_status(final_status)
+        normalized_status_message = normalize_optional_text(status_message)
+        normalized_download_path = normalize_optional_text(download_path)
+        normalized_retry_payload = self._serialize_retry_payload(retry_payload)
+        effective_terminal_at = now_utc_iso()
+
+        with self._lock:
+            conn = self._connect()
+            try:
+                cursor = conn.execute(
+                    """
+                    UPDATE download_history
+                    SET final_status = ?,
+                        status_message = ?,
+                        download_path = ?,
+                        retry_payload = COALESCE(?, retry_payload),
+                        terminal_at = ?
+                    WHERE task_id = ? AND final_status = 'active'
+                    """,
+                    (
+                        normalized_final_status,
+                        normalized_status_message,
+                        normalized_download_path,
+                        normalized_retry_payload,
+                        effective_terminal_at,
+                        normalized_task_id,
+                    ),
+                )
+                rowcount = int(cursor.rowcount) if cursor.rowcount is not None else 0
+                if rowcount < 1:
+                    logger.warning(
+                        "finalize_download: no active row found for task_id=%s (may have been missed at queue time)",
+                        normalized_task_id,
+                    )
+                conn.commit()
+            finally:
+                conn.close()
+
+    def get_by_task_id(self, task_id: str) -> dict[str, Any] | None:
+        """Return a persisted download row for the given task id."""
+        normalized_task_id = _normalize_task_id(task_id)
+        conn = self._connect()
+        try:
+            row = conn.execute(
+                "SELECT * FROM download_history WHERE task_id = ?",
+                (normalized_task_id,),
+            ).fetchone()
+            return self._row_to_dict(row)
+        finally:
+            conn.close()
+
+    def list_recent(
+        self,
+        *,
+        user_id: int | None,
+        limit: int = 200,
+    ) -> list[dict[str, Any]]:
+        """Return recent persisted download rows, optionally scoped to one user."""
+        normalized_user_id = normalize_optional_positive_int(user_id, "user_id")
+        normalized_limit = _normalize_limit(limit, default=200, minimum=1, maximum=1000)
+        query = "SELECT * FROM download_history"
+        params: list[Any] = []
+        if normalized_user_id is not None:
+            query += " WHERE user_id = ?"
+            params.append(normalized_user_id)
+        query += " ORDER BY terminal_at DESC, id DESC LIMIT ?"
+        params.append(normalized_limit)
+
+        conn = self._connect()
+        try:
+            rows = conn.execute(query, params).fetchall()
+            result: list[dict[str, Any]] = []
+            for row in rows:
+                normalized = self._normalize_row_dict(dict(row))
+                if normalized is not None:
+                    result.append(normalized)
+            return result
+        finally:
+            conn.close()