All except
`toolchain/check/testdata/interop/cpp/function_param_int*.carbon` and
`toolchain/check/testdata/interop/cpp/function_return.carbon`.
Don't output SemIR for cases that are intended to fail.
I believe we will need to eventually add the specific C++ import
information in `LocId`.
This also seems to fix the `LanguageServerDiagnosticInWrongFile` issue
(#5604).
We're still not in the state we want to be according to
https://github.com/carbon-language/carbon-lang/pull/5246#issuecomment-2784301206.
Will look into removing the location part from the `"In file included
from ..."` line.
Part of #5245.
This mirrors how imports work in general, that the imported declarations
shouldn't belong to the first referencing scope (particularly apparent
when referenced across multiple scopes). I think this was just an
oversight here.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Previously we walked the global variables defined by the current file
and emitted an LLVM global variable definition for each of them. Now
instead, when emitting a constant reference to a global variable, we
emit an LLVM global variable declaration, and we then subsequently walk
the global variables defined by the current file and convert each of
them from a declaration to a definition.
In order to make import of names of global variables work, add support
for import of `var`, as well as support for importing `tuple_access` and
`tuple_pattern` in the case where the `var` has a tuple pattern in its
declaration. Also treat `bind_name`s that are reference bindings to
`var`s as having the same constant reference value as their `var` so
that we can properly import and lower them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
* Add // === headlines on group of file shards.
* Rename shard files to shorten given the file context them and add
`todo` where appropriate and group them together..
* Add // === headlines on group of file shards.
* Rename shard files to shorten given the file context them and add
`todo` where appropriate.
Not splitting this file for now.
Part of #5150.
* Split to 4 files: `function_param_int16`, `function_param_int32`,
`function_param_unsupported.carbon`, `function_return`.
* Add // === headlines on group of file shards.
* Rename shard files to shorten them and make them more consistent given
the file context.
* Deduplicate identical .h files and group their tests.
Potential future improvements:
* Split further. For example, pointers and references might be somewhat
separate from int primitives.
* Remove `import_` shard file prefix, as it repeats itself, but leaving
for now as it makes it more explicit.
Part of #5263
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Provide builtins for compound assignments instead of defining them in
the prelude as a use of a binary operator and an assignment. This allows
us to lower compound assignment directly to LLVM operations instead of
producing a function call. In the short term this also allows us to
define a type-generic compound assignment in the prelude.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
This flows out of #5084 and trying to reduce UnsafeMake use. It turns
out imports and namespaces were using unexpected node kinds (previously
ImportIntroducer instead of ImportDecl, for example). This fixes and
adds validation.
I was uncertain about whether to just remove the is_convertible check,
since I don't see it as motivating creation of a conversion between
NodeIdOneOf types. So I've just left a TODO for now.
This adds support for having different C++ `NameScope`s (and not just
the main `Cpp` scope), and we keep a pointer to `clang::DeclContext`
these scopes so we can look up C++ names in the right part of the AST.
C++ Interop Demo with a namespace:
```c++
// hello_world.h
namespace some_namespace {
void hello_world();
} // namespace some_namespace
```
```c++
// hello_world.cpp
#include <cstdio>
namespace some_namespace {
void hello_world() { printf("Hello World!\n"); }
} // namespace some_namespace
```
```carbon
// main.carbon
library "Main";
import Cpp library "hello_world.h";
fn Run() -> i32 {
Cpp.some_namespace.hello_world();
return 0;
}
```
```shell
$ clang -c hello_world.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link hello_world.o main.o --output=demo
$ ./demo
Hello World!
```
Closes#5102
ASTUnit is owned by `CompileSubcommand`, passed through `Unit` to be
populated in `ImportCppFiles()` and used via `SemIR::File`.
When generating the AST, pass `-x c++` args to compile C++ (temporary
until we pass args properly).
`Cpp` namespace is marked as a special namespace and has dedicated logic
in `LookupNameInExactScope()`.
The logic for importing declarations from C++ to Carbon is in
`import_cpp.cpp`, but we're likely to want to refactor this
signfiicantly over time as it grows (perhaps a dedicated directory?).
Part of #4666.
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
This switches most error printing to use diagnostics instead of direct
stream writes, even when not a specific file diagnostic. I'm allowing
empty filenames for this use-case.
This allows a little more specific testing to validate coverage of
output using the diagnostic coverage test. I'm adding a few tests to
cover things that weren't previously tested.
Separately, this also forces a little more standardization in format...
considering how changes like #4568 show effort being spent to _mirror_
diagnostic style, my thought is now to just use diagnostic code where
possible.
Note this also allows incrementally better testing of the language
server; I'm changing the crash fix from #4847 in favor of diagnostic
testing.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Ivana Ivanovska
Jon Ross-Perkins
Boaz Brickner
Geoff Romer
Dana JansensandRichard Smith
