Switching from RE2 to StrReplaceAll because it seems a fair fit for what
actually needs to be done here. Also pick up \t for visibility reasons.
This came up because clangd's LSP-related APIs print carriage returns.
`toolchain/autoupdate_testdata.py --allow-check-fail` can now be used to
perform an autoupdate even if some `CARBON_CHECK`s are failing. What
this does will depend on how the toolchain behaves after the `CHECK`
failure, and of course there's no guarantees there, but this can be
useful if it's easier to debug the `CHECK` failure by looking at the
produced SemIR.
Internally, this uses `bazel build --config=non-fatal-checks`, which in
turn specifies a `--per_file_copt` for `check_internal.cpp`. The intent
here is that the rebuild required to enable or disable this mode is as
small as reasonably possible.
This mode is not compatible with `-c opt`, as it's important that check
failure calls are `[[noreturn]]` in `-c opt` mode.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Came up on #4831, style:
"For a type T whose values can be compared for equality, define a
non-member operator== and document when two values of type T are
considered equal."
https://google.github.io/styleguide/cppguide.html#Operator_Overloading
Note while we could put some of these out-of-line, it's helpful to keep
them inside the braces:
- For private member access
- For templated cases so that we aren't duplicating templates
- Very mild preference for keeping class's API documented within the
braces
This is a followup from #4834, I searched for "invalid" uses in our
codebase. This is mostly changing comments, and a couple debug
functions, but shouldn't affect testable behavior.
Note a couple things I'll highlight as not changing (but could) are:
- `ReturnTypeInfo::is_valid`
- `"invalid"` uses in the formatter
- `AddInvalid` for `!has_value` in `inst_fingerprinter` (because the
cases it's called sound invalid-ish)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
In order to write language-server tests, we need some way to pass stdin
input. This adds support for a split "// --- STDIN" which will be
provided as a temp file for testing.
Note this does more stdin -> input_stream style renaming, this is just
bugging me more since I know shadowing works but it can be subtle to
read, particularly since I'm now making direct use of stdin in a handful
of spots.
The language server needs stdin, and for tests we should be passing it
around. My intent is to pass in a faux stdin to Driver for language
server tests.
As long as I'm adding a new parameter, I was looking at also changing
the way streams are passed in to Driver for style (pointers since
they're held past construction lifetime). Since these are all stored in
DriverEnv, I thought it might be a net improvement to use the struct
directly, getting more explicit parameter names and also removing the
need for `SetFuzzing`.
I'm trying here to avoid functional changes, but there are a couple
additional fixes like removing an obsolete `find_insensitive` and
refactoring how `ValidateOptions` handles errors (because it reduces the
number of spots that operate on error_stream).
I believe `check_syntax` is already controlling the semantic vs
syntactic merge, added in #4149. Other parts of the TODO are clarified
per discussion. But this is tested, e.g. errors with the bool flipped:
```
impl i32 as I {
+ // CHECK:STDERR: method.carbon:[[@LINE+6]]:14: error: redeclaration syntax di
ffers here [RedeclParamSyntaxDiffers]
+ // CHECK:STDERR: fn F[self: i32](other: i32) -> i32 = "int.sadd";
+ // CHECK:STDERR: ^~~
+ // CHECK:STDERR: method.carbon:[[@LINE-7]]:14: note: comparing with previous
declaration here [RedeclParamSyntaxPrevious]
+ // CHECK:STDERR: fn F[self: Self](other: Self) -> Self;
+ // CHECK:STDERR: ^~~~
fn F[self: i32](other: i32) -> i32 = "int.sadd";
}
```
This adds a RawStringOstream. Versus TestRawOstream, which is
consolidated over to RawStringOstream, it uses a string for storage
instead of a vector, mainly to support move-to-string semantics. Versus
llvm::raw_string_ostream, it owns the string and supports pwrite (which
is needed for driver and its fd_ostream compatibility requirement).
This converts most uses of llvm::raw_string_ostream, leaving behind a
few in InstNamer that explicitly cannot own the string, such as:
```
llvm::raw_string_ostream(name)
<< "_" << tree.tokens().GetColumnNumber(token);
```
I have this as its own library so that it can use CHECK.
Yes this doesn't save much code, but it's code we repeatedly write.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Exclude some files from the website and prebuild steps that aren't part
of the git repository, but may exist in a checkout, and if present will
cause the website prebuild or build to misbehave or break.
---------
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
The "templated for consistency" variants felt a little confusing when I
was working on #4795, so suggesting to remove templating where it's not
helpful to instantiate (particularly when there were both templated and
non-templated variants). Note this leaves a `PeekIs<IdT>` because
there's indirection there, but that's more the exception than the rule.
Rename `CheckIsAllowedRedecl` to `DiagnoseIfInvalidRedecl` to try to
better document behavior, and clean up comments.
This extends the no-merge-if-defined behavior to functions. It was
already the case for class/interface, and just added for impl, so if
anything functions were now inconsistent. I was kind of tempted to make
a helper for it, but I didn't think of a great structure/name to get
there: `DiagnoseRedef` isn't always called when it's a redefinition, for
example due to `extern` diagnostics, it's hard to combine.
Cleans up `is_defined` calls to rely more on `has_definition_started`,
removing some code paths that are unused since definitions aren't
merged.
Insert the poison at the same time we do the name lookup to avoid doing
two hash table lookups into each scope. This adds a bit of complication
because import logic now needs to cope with importing a name that is
already poisoned, but the complexity seems worthwhile to reduce the
number of name lookups performed.
This incidentally fixes a bug where we wouldn't poison any name scopes
if we found the name in an enclosing lexical scope, leading to one extra
diagnostic in existing tests.
Part of #4622
Fixes a crash, see the new regression test in
toolchain/check/testdata/impl/no_prelude/generic_redeclaration.carbon.
Stopping merging seems like the most straightforward way to prevent
references to generic regions with the incorrect block.
The WORKSPACE file is deprecated; support is already off by default, and
it'll be removed in the next major bazel release. Our main dependency is
tree-sitter, and I'm trying to address that here.
We're currently using https://github.com/elliottt/rules_tree_sitter, but
that hasn't been updated in a couple years, meaning it lacks
MODULE.bazel support. In the registry, there's
https://registry.bazel.build/modules/tree-sitter-bazel, but this is only
the *parser* libraries of tree-sitter, not the *generator*. I'm using it
for that much, at least.
For the *generator*, which transforms grammar.js to parser.c/h, I'm just
requiring a non-hermetic invocation (i.e., people who want to work on it
will need to install tree-sitter; see the README.md updates). I tried
running it manually, but parser.c is about 600 KB; pre-commit rejects
files that large and I don't think an exception makes sense to override
for this (it'd probably also grow substantially if the grammar were
updated to cover more syntax). In order to make the non-hermetic call
not break "bazel build //..." for most developers, I'm marking most
targets in the package as manual.
Note, I did look long and hard at using `aspect_rules_js`/`rules_nodejs`
to invoke npm. This took a lot of time, and I have a commit that's
mostly working, except I hit a point where it uses `declare_symlink`
which we disallow for compatibility reasons (commit "Lots of work for
figuring out rule_js uses declare_symlink" on the PR). As a consequence,
I think we can't use the primary supported ways to have hermetic npm
calls.
Also, `treesitter` -> `tree_sitter` because it's generally called
`tree-sitter`, two words. We even had a `treesitter/src/tree_sitter`
directory so it's a bit inconsistent.
As far as bugs here, the parser library breaks bazel queries, e.g. the
error:
```
ERROR: Evaluation of query "somepath(//..., @llvm-project//third-party/unittest:gtest)" failed: preloading transitive closure failed: no such package '@@[unknown repo 'platforms' requested from @@tree-sitter-bazel+]//': The repository '@@[unknown repo 'platforms' requested from @@tree-sitter-bazel+]' could not be resolved: No repository visible as '@platforms' from repository '@@tree-sitter-bazel+'
```
I'm just excluding tree_sitter from queries where I can to work around
the error.
When declaring a class (or interface), we create a scope that covers the
entire class declaration. If the class was declared in a lexical scope,
we would declare the class name in the innermost scope, which was the
class's own scope instead of the enclosing lexical scope.
Fix this by instead adding the name to the lexical scope at the start of
the class declaration, not the lexical scope created to hold the class.
For now, we reject if the class name would have been shadowed by a name
that has already been declared within its scope, such as a generic
parameter, so we only ever need to modify the end of the list of lexical
lookup results for the class name.
This appears to be sufficient to make local declarations and definitions
of classes and interfaces work properly throughout check, though testing
is pretty minimal so far.
With this change, we now support impl of interfaces with non-function
associated constants.
Also:
* Make impl diagnostics use more consistent names
* Make some impl tests "no_prelude"
Still to do:
* Facet type resolution as a separate, reusable step
* Using the assigned values of associated constants (see
`fail_todo_use_assoc_const.carbon`)
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Jon Ross-Perkins
Richard Smith
Geoff Romer
David Blaikie
Calvin
dependabot[bot]
Boaz Brickner
Dana Jansens
josh11bandJosh L