Merge pull request #20 from ThePhaseless/seleniumbase

Seleniumbase
add title parsing
2026-09-24 22:03:30 +01:00 · 2024-11-25 00:07:12 +01:00 · 2024-11-24 23:04:19 +00:00 · 2024-11-24 22:50:04 +00:00 · 2024-11-24 22:28:08 +00:00 · 2024-11-24 22:27:01 +00:00
41 changed files with 2949 additions and 3344 deletions
@@ -0,0 +1,5 @@
+FROM python:3.12
+
+RUN apt update && apt upgrade -y && apt install -y chromium xvfb
+
+RUN curl -sSL https://install.python-poetry.org | python3 -
@@ -3,26 +3,35 @@
 {
  // Or use a Dockerfile or Docker Compose file. More info: https://containers.dev/guide/dockerfile
  "build": {
-    "dockerfile": "../Dockerfile",
-    "target": "devcontainer"
+    "dockerfile": "Dockerfile"
  },
-  "runArgs": ["--security-opt", "label=disable", "--privileged"],
  "customizations": {
    "vscode": {
      "extensions": [
        "charliermarsh.ruff",
-        "ms-python.python",
-        "tamasfe.even-better-toml"
+        "-ms-python.autopep8",
+        "-ms-python.vscode-pylance"
      ],
      "settings": {
        "python.venvPath": "./venv"
      }
    }
  },
-  "postCreateCommand": "uv sync --group test",
+  // Features to add to the dev container. More info: https://containers.dev/features.
+  // "features": {},
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  // Use 'postCreateCommand' to run commands after the container is created.
+  // "postCreateCommand": "pip3 install --user -r requirements.txt",
+  // Configure tool-specific properties.
+  // "customizations": {},
+  // Uncomment to connect as root instead. More info: https://aka.ms/dev-containers-non-root.
+  // "remoteUser": "root"
+  "name": "Byparr Dev Container",
+  "runArgs": [
+    "-p",
+    "8181:8191"
+  ],
  "features": {
-    "ghcr.io/devcontainers/features/docker-in-docker:2": {
-      "moby": false
-    }
+    "ghcr.io/devcontainers-extra/features/act:1": {}
  }
-}
+}
@@ -1 +0,0 @@
-.gitignore
@@ -0,0 +1,164 @@
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+wheels/
+share/python-wheels/
+*.egg-info/
+.installed.cfg
+*.egg
+MANIFEST
+
+# PyInstaller
+#  Usually these files are written by a python script from a template
+#  before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+htmlcov/
+.tox/
+.nox/
+.coverage
+.coverage.*
+.cache
+nosetests.xml
+coverage.xml
+*.cover
+*.py,cover
+.hypothesis/
+.pytest_cache/
+cover/
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+local_settings.py
+db.sqlite3
+db.sqlite3-journal
+
+# Flask stuff:
+instance/
+.webassets-cache
+
+# Scrapy stuff:
+.scrapy
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+.pybuilder/
+target/
+
+# Jupyter Notebook
+.ipynb_checkpoints
+
+# IPython
+profile_default/
+ipython_config.py
+
+# pyenv
+#   For a library or package, you might want to ignore these files since the code is
+#   intended to run in multiple environments; otherwise, check them in:
+# .python-version
+
+# pipenv
+#   According to pypa/pipenv#598, it is recommended to include Pipfile.lock in version control.
+#   However, in case of collaboration, if having platform-specific dependencies or dependencies
+#   having no cross-platform support, pipenv may install dependencies that don't work, or not
+#   install all needed dependencies.
+#Pipfile.lock
+
+# poetry
+#   Similar to Pipfile.lock, it is generally recommended to include poetry.lock in version control.
+#   This is especially recommended for binary packages to ensure reproducibility, and is more
+#   commonly ignored for libraries.
+#   https://python-poetry.org/docs/basic-usage/#commit-your-poetrylock-file-to-version-control
+#poetry.lock
+
+# pdm
+#   Similar to Pipfile.lock, it is generally recommended to include pdm.lock in version control.
+#pdm.lock
+#   pdm stores project-wide configurations in .pdm.toml, but it is recommended to not include it
+#   in version control.
+#   https://pdm.fming.dev/latest/usage/project/#working-with-version-control
+.pdm.toml
+.pdm-python
+.pdm-build/
+
+# PEP 582; used by e.g. github.com/David-OConnor/pyflow and github.com/pdm-project/pdm
+__pypackages__/
+
+# Celery stuff
+celerybeat-schedule
+celerybeat.pid
+
+# SageMath parsed files
+*.sage.py
+
+# Environments
+.env
+.venv
+env/
+venv/
+ENV/
+env.bak/
+venv.bak/
+
+# Spyder project settings
+.spyderproject
+.spyproject
+
+# Rope project settings
+.ropeproject
+
+# mkdocs documentation
+/site
+
+# mypy
+.mypy_cache/
+.dmypy.json
+dmypy.json
+
+# Pyre type checker
+.pyre/
+
+# pytype static type analyzer
+.pytype/
+
+# Cython debug symbols
+cython_debug/
+
+# PyCharm
+#  JetBrains specific template is maintained in a separate JetBrains.gitignore that can
+#  be found at https://github.com/github/gitignore/blob/main/Global/JetBrains.gitignore
+#  and can be added to the global gitignore or merged into this file.  For a more nuclear
+#  option (not recommended) you can uncomment the following to ignore the entire idea folder.
+#.idea/
+
+.extentions/
@@ -0,0 +1,24 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**I've:**
+- [ ] - read Loop Warning on Readme.
+- [ ] - done the troubleshooting from Readme.
+- [ ] - checked if such issue already exists.
+
+**Docker host (please complete the following information):**
+ - OS: [e.g. Ubuntu Linux]
+ - Platform and model: [Synology, PC, Laptop, RPi 3]
+ - Architecture [e.g. ARM64]
+
+**Additional context**
+Add any other context about the problem here.
@@ -1,88 +0,0 @@
-name: Bug report
-description: Create a bug report
-assignees: ThePhaseless
-labels: bug
-
-body:
-  - type: checkboxes
-    attributes:
-      label: "I've completed the following steps:"
-      options:
-        - label: Read Loop Warning on Readme
-        - label: "Used --init/init: true in docker run/compose.yaml"
-        - label: Done the troubleshooting from Readme
-        - label: Checked if such issue already exists
-        - label: Checked other websites with Cloudflare Turnstile
-        - label: I am able to access the webpage from my browser
-        - label: (Docker only) Checked that the problem does also occur on main tag
-
-  - type: checkboxes
-    attributes:
-      label: "If checked other websites with Cloudflare Turnstile:"
-      options:
-        - label: Other websites do work.
-        - label: Other websites do not work.
-
-  - type: checkboxes
-    attributes:
-      label: "The issue is still present in the latest main tag:"
-      options:
-        - label: "Yes"
-        - label: "No"
-
-  - type: input
-    id: docker-host
-    attributes:
-      label: OS/Docker Host
-      placeholder: e.g. Docker, WSL2, Ubuntu, Windows
-
-  - type: input
-    id: platform-model
-    attributes:
-      label: Platform and model
-      placeholder: e.g. Synology, PC, Laptop, RPi 3
-
-  - type: input
-    id: architecture
-    attributes:
-      label: Architecture
-      placeholder: e.g. ARM64
-
-  - type: input
-    id: website
-    attributes:
-      label: Example website/URL that does not work
-      placeholder: e.g. https://nowsecure.nl
-
-  - type: textarea
-    attributes:
-      label: Describe the bug
-      description: A clear and concise description of what the bug is.
-      placeholder: "Example: The application crashes when trying to load a new file"
-
-  - type: textarea
-    id: config
-    attributes:
-      label: Docker Compose config
-      placeholder: |
-        ```yaml
-        services:
-          ...
-        ```
-  - type: textarea
-    id: prowlarr-logs
-    attributes:
-      label: Prowlarr Logs
-      placeholder: |
-        ```
-        put logs between 3x `
-        ```
-
-  - type: textarea
-    id: byparr-logs
-    attributes:
-      label: Byparr Logs
-      placeholder: |
-        ```
-        put logs between 3x `
-        ```
@@ -1 +0,0 @@
-blank_issues_enabled: false
@@ -1,29 +0,0 @@
-name: Feature request
-description: Suggest a new feature or improvement
-assignees:
-  - ThePhaseless
-labels: enhancement
-
-body:
-  - type: checkboxes
-    attributes:
-      label: "Before submitting, I've done the following:"
-      options:
-        - label: Checked the existing feature requests to avoid duplicates
-
-  - type: textarea
-    attributes:
-      label: Describe the problem this feature would solve
-      description: Clearly explain the issue or need that this feature addresses.
-      placeholder: "Example: It's difficult to manage multiple configurations because..."
-
-  - type: textarea
-    attributes:
-      label: Alternatives considered
-      description: Have you considered any alternative solutions or workarounds? If so, please describe them.
-      placeholder: "Example: As a workaround, I've been manually editing the config files, but this is error-prone."
-
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: Add any other context or information that might be helpful in understanding your request. This could include use cases, mockups, or links to relevant discussions.
@@ -0,0 +1,16 @@
+# To get started with Dependabot version updates, you'll need to specify which
+# package ecosystems to update and where the package manifests are located.
+# Please see the documentation for more information:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+# https://containers.dev/guide/dependabot
+
+version: 2
+updates:
+  - package-ecosystem: "devcontainers"
+    directory: "/"
+    schedule:
+      interval: weekly
+  - package-ecosystem: github-actions
+    directory: ".github/workflows/"
+    schedule:
+      interval: weekly
@@ -1,107 +0,0 @@
-name: Cleanup PR Docker Images
-
-on:
-  pull_request:
-    types: [closed]
-
-env:
-  REGISTRY: ghcr.io
-  IMAGE_NAME: ${{ github.repository }}
-
-jobs:
-  cleanup:
-    runs-on: ubuntu-latest
-    permissions:
-      packages: write
-      contents: read
-
-    steps:
-      - name: Delete PR Docker images
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const owner = context.repo.owner.toLowerCase();
-            const repo = context.repo.repo.toLowerCase();
-            const prNumber = context.payload.pull_request.number;
-
-            // Get the package
-            const packageName = `${repo}`;
-
-            console.log(`Cleaning up images for PR #${prNumber}`);
-
-            // Check if owner is an org or user
-            let isOrg = false;
-            try {
-              await github.rest.orgs.get({ org: owner });
-              isOrg = true;
-              console.log(`Repository owner is an organization`);
-            } catch (error) {
-              console.log(`Repository owner is a user account`);
-            }
-
-            try {
-              // Get all versions of the package
-              let versions;
-              if (isOrg) {
-                versions = await github.rest.packages.getAllPackageVersionsForPackageOwnedByOrg({
-                  package_type: 'container',
-                  package_name: packageName,
-                  org: owner,
-                  per_page: 100
-                });
-              } else {
-                versions = await github.rest.packages.getAllPackageVersionsForPackageOwnedByUser({
-                  package_type: 'container',
-                  package_name: packageName,
-                  username: owner,
-                  per_page: 100
-                });
-              }
-
-              // Filter versions that match this PR (pr-123, pr-123-amd64, pr-123-arm64)
-              const prVersions = versions.data.filter(version => {
-                const tags = version.metadata?.container?.tags || [];
-                // Match tags like: pr-123, pr-123-amd64, pr-123-arm64
-                return tags.some(tag =>
-                  tag === `pr-${prNumber}` ||
-                  tag === `pr-${prNumber}-amd64` ||
-                  tag === `pr-${prNumber}-arm64`
-                );
-              });
-
-              console.log(`Found ${prVersions.length} image version(s) to delete`);
-
-              // Delete each version
-              for (const version of prVersions) {
-                console.log(`Deleting version ${version.id} with tags: ${version.metadata?.container?.tags?.join(', ')}`);
-                try {
-                  if (isOrg) {
-                    await github.rest.packages.deletePackageVersionForOrg({
-                      package_type: 'container',
-                      package_name: packageName,
-                      org: owner,
-                      package_version_id: version.id
-                    });
-                  } else {
-                    await github.rest.packages.deletePackageVersionForUser({
-                      package_type: 'container',
-                      package_name: packageName,
-                      username: owner,
-                      package_version_id: version.id
-                    });
-                  }
-                  console.log(`✓ Deleted version ${version.id}`);
-                } catch (error) {
-                  console.error(`Failed to delete version ${version.id}:`, error.message);
-                }
-              }
-
-              console.log('Cleanup completed');
-            } catch (error) {
-              if (error.status === 404) {
-                console.log('No package found - nothing to clean up');
-              } else {
-                console.error('Error during cleanup:', error.message);
-                throw error;
-              }
-            }
@@ -9,30 +9,11 @@ on:
  schedule:
    - cron: "25 0 * * *"
  push:
-    branches: ["*"]
+    branches: ["main"]
    # Publish semver tags as releases.
    tags: ["v*.*.*"]
-    paths:
-      - "src/**"
-      - "main.py"
-      - "tests/**"
-      - "Dockerfile"
-      - "pyproject.toml"
-      - "uv.lock"
-      - "compose.yaml"
-      - ".github/workflows/docker-publish.yml"
  pull_request:
    branches: ["main"]
-    paths:
-      - "src/**"
-      - "main.py"
-      - "tests/**"
-      - "Dockerfile"
-      - "pyproject.toml"
-      - "uv.lock"
-      - "compose.yaml"
-      - ".github/workflows/docker-publish.yml"
-  workflow_dispatch:

 env:
  # Use docker.io for Docker Hub if empty
@@ -40,139 +21,85 @@ env:
  # github.repository as <account>/<repo>
  IMAGE_NAME: ${{ github.repository }}

-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
 jobs:
  test:
    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      packages: write
-      id-token: write
-
    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-
-      - name: Test
-        id: test
-        uses: docker/build-push-action@v7
+      - uses: actions/checkout@v4
+      - name: Set up Python
+        uses: actions/setup-python@v5
        with:
-          context: .
-          platforms: linux/amd64
-          cache-from: type=gha,scope=x64
-          pull: true
-          cache-to: type=gha,mode=max,scope=x64
-          target: test
+          python-version: "3.12"
+
+      - name: Set up Poetry
+        run: pip install poetry
+
+      - name: Setup a local virtual environment (if no poetry.toml file)
+        run: |
+          poetry config virtualenvs.create true --local
+          poetry config virtualenvs.in-project true --local
+
+      - uses: actions/cache@v4
+        name: Define a cache for the virtual environment based on the dependencies lock file
+        with:
+          path: ./.venv
+          key: venv-${{ hashFiles('poetry.lock') }}
+
+      - name: Install dependencies
+        run: |
+          poetry install
+          sudo apt update
+          sudo apt install -y xvfb scrot python3-tk
+          wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
+          sudo apt install -y ./google-chrome-stable_current_amd64.deb
+          rm ./google-chrome-stable_current_amd64.deb
+
+      - name: Run tests
+        run: poetry run pytest

  build:
    needs: test
-    # Skip build for Renovate PRs
-    if: github.event.pull_request.user.login != 'renovate[bot]'
    runs-on: ubuntu-latest
    permissions:
      contents: read
      packages: write
+      # This is used to complete the identity challenge
+      # with sigstore/fulcio when running outside of PRs.
      id-token: write

-    strategy:
-      matrix:
-        platform: [linux/amd64, linux/arm64]
-
    steps:
      - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4

-      - name: Prepare variables
-        id: vars
-        run: |
-          SURFIX=$(echo ${{ matrix.platform }} | cut -d'/' -f2)
-          echo "SURFIX=$SURFIX" >> $GITHUB_OUTPUT
+      # Install the cosign tool except on PR
+      # https://github.com/sigstore/cosign-installer
+      - name: Install cosign
+        if: github.event_name != 'pull_request'
+        uses: sigstore/cosign-installer@dc72c7d5c4d10cd6bcb8cf6e3fd625a9e5e537da #v3.7.0
+        with:
+          cosign-release: "v2.2.4"

-          # Use PR number for PRs, SHA for everything else
-          if [ "${{ github.event_name }}" == "pull_request" ]; then
-            echo "LOCAL_TAG=pr-${{ github.event.pull_request.number }}-$SURFIX" >> $GITHUB_OUTPUT
-          else
-            echo "LOCAL_TAG=${{ github.sha }}-$SURFIX" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
-
-      # Set up BuildKit Docker container builder
+      # Set up BuildKit Docker container builder to be able to build
+      # multi-platform images and export cache
+      # https://github.com/docker/setup-buildx-action
      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@c47758b77c9736f4b2ef4073d4d51994fabfe349 # v3.7.1

-      # Log into registry
+      # Login against a Docker registry except on PR
+      # https://github.com/docker/login-action
      - name: Log into registry ${{ env.REGISTRY }}
-        uses: docker/login-action@v4
+        if: github.event_name != 'pull_request'
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567 # v3.3.0
        with:
          registry: ${{ env.REGISTRY }}
          username: ${{ github.actor }}
          password: ${{ secrets.GITHUB_TOKEN }}

      # Extract metadata (tags, labels) for Docker
+      # https://github.com/docker/metadata-action
      - name: Extract Docker metadata
        id: meta
-        uses: docker/metadata-action@v6
-        with:
-          tags: type=raw,value=${{ steps.vars.outputs.LOCAL_TAG }}
-          images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}
-
-      # Build and push Docker image for each platform
-      - name: Build Docker image
-        id: build
-        uses: docker/build-push-action@v7
-        with:
-          context: .
-          pull: true
-          push: true
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-          platforms: ${{ matrix.platform }}
-          cache-from: type=gha,scope=${{ matrix.platform }}
-          cache-to: type=gha,mode=max,scope=${{ matrix.platform }}
-          build-args: |
-            GITHUB_BUILD=true
-            VERSION=${{ github.ref_type == 'tag' && github.ref_name || github.sha }}
-
-  merge-and-push:
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      packages: write
-      id-token: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-
-      # Install the cosign tool
-      - name: Install cosign
-        uses: sigstore/cosign-installer@v3
-
-      # Set up Docker Buildx
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-
-      # Log into registry
-      - name: Log into registry ${{ env.REGISTRY }}
-        uses: docker/login-action@v4
-        with:
-          registry: ${{ env.REGISTRY }}
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      # Extract Docker metadata for tagging
-      - name: Extract Docker metadata
-        id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@8e5442c4ef9f78752691e2d8f8d19755c6f78e81 # v5.5.1
        with:
          tags: |
            type=ref,event=branch
@@ -180,44 +107,35 @@ jobs:
            type=semver,pattern={{version}}
            type=semver,pattern={{major}}.{{minor}}
            type=semver,pattern={{major}}
+            type=raw,enable=${{ github.event_name != 'pull_request' && github.ref_name == 'main' }}, value=latest
          images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}

-      # Create manifest lists and push
-      - name: Create and push manifest lists
-        run: |
-          TAGS="${{ steps.meta.outputs.tags }}"
-          args=""
+      # Build and push Docker image with Buildx (don't push on PR)
+      # https://github.com/docker/build-push-action
+      - name: Build and push Docker image
+        id: build-and-push
+        uses: docker/build-push-action@4f58ea79222b3b9dc2c8bbdd6debcef730109a75 # v6.9.0
+        with:
+          context: .
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          platforms: linux/amd64,linux/arm64
+          cache-from: type=gha
+          cache-to: type=gha,mode=max
+          build-args: GITHUB_BUILD=true

-          image=${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}
-          image=${image,,}
-
-          # Create tag arguments
-          for tag in $TAGS; do
-              args="$args -t $tag"
-          done
-
-          if [ "${{ github.ref_type }}" == "tag" ]; then
-            args="$args -t ${image}:latest"
-          fi
-
-          echo $args
-
-          # Use PR-based tags for PRs, SHA-based tags for everything else
-          if [ "${{ github.event_name }}" == "pull_request" ]; then
-            docker buildx imagetools create $args \
-            ${image}:pr-${{ github.event.pull_request.number }}-amd64 \
-            ${image}:pr-${{ github.event.pull_request.number }}-arm64
-          else
-            docker buildx imagetools create $args \
-            ${image}:${{github.sha}}-amd64 \
-            ${image}:${{github.sha}}-arm64
-          fi
-
-      # Sign the manifest
-      - name: Sign the manifests
+      # Sign the resulting Docker image digest except on PRs.
+      # This will only write to the public Rekor transparency log when the Docker
+      # repository is public to avoid leaking data.  If you would like to publish
+      # transparency data even for private images, pass --force to cosign below.
+      # https://github.com/sigstore/cosign
+      - name: Sign the published Docker image
+        if: ${{ github.event_name != 'pull_request' }}
        env:
+          # https://docs.github.com/en/actions/security-guides/security-hardening-for-github-actions#using-an-intermediate-environment-variable
          TAGS: ${{ steps.meta.outputs.tags }}
-        run: |
-          for TAG in $TAGS; do
-            cosign sign --yes $TAG
-          done
+          DIGEST: ${{ steps.build-and-push.outputs.digest }}
+        # This step uses the identity token to provision an ephemeral certificate
+        # against the sigstore community Fulcio instance.
+        run: echo "${TAGS}" | xargs -I {} cosign sign --yes {}@${DIGEST}
@@ -165,10 +165,7 @@ cython_debug/
 core

 # Screenshots
-screenshots/
+*.png

 # Downloaded files
-downloaded_files/
-
-# Browser Data
-browser_data/
+downloaded_files/
@@ -1,17 +1,27 @@
 {
-  "version": "0.2.0",
-  "configurations": [
-    {
-      "console": "integratedTerminal",
-      "env": {
-        "LOG_LEVEL": "DEBUG"
-      },
-      "purpose": ["debug-test", "debug-in-terminal"],
-      "justMyCode": false,
-      "name": "Python Debugger: Main",
-      "program": "main.py",
-      "request": "launch",
-      "type": "debugpy"
-    }
-  ]
-}
+    // Use IntelliSense to learn about possible attributes.
+    // Hover to view descriptions of existing attributes.
+    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "name": "Python Debugger: Main",
+            "type": "debugpy",
+            "justMyCode": false,
+            "env": {
+                "LOG_LEVEL": "DEBUG",
+            },
+            "request": "launch",
+            "program": "main.py",
+            "console": "integratedTerminal"
+        },
+        {
+            "name": "Python Debugger: Current File",
+            "justMyCode": false,
+            "type": "debugpy",
+            "request": "launch",
+            "program": "${file}",
+            "console": "integratedTerminal"
+        }
+    ]
+}
@@ -1,18 +1,20 @@
 {
-  "[python]": {
-    "editor.defaultFormatter": "charliermarsh.ruff"
-  },
-  "python.analysis.autoImportCompletions": true,
-  "python.analysis.packageIndexDepths": [
-    {
-      "depth": 5,
-      "includeAllSymbols": true,
-      "name": ""
-    }
-  ],
-  "python.terminal.activateEnvironment": true,
-  "python.testing.pytestArgs": ["tests", "-n", "auto", "--retries=3"],
-  "python.testing.pytestEnabled": true,
-  "python.testing.unittestEnabled": false,
-  "cSpell.words": ["camoufox", "domcontentloaded", "networkidle"]
-}
+    "python.testing.pytestArgs": [
+        "tests"
+    ],
+    "python.testing.unittestEnabled": false,
+    "python.testing.pytestEnabled": true,
+    "python.analysis.autoImportCompletions": true,
+    "python.analysis.typeCheckingMode": "basic",
+    "python.terminal.activateEnvironment": true,
+    "[python]": {
+        "editor.defaultFormatter": "charliermarsh.ruff",
+    },
+    "python.analysis.packageIndexDepths": [
+        {
+            "name": "",
+            "depth": 5,
+            "includeAllSymbols": true,
+        }
+    ],
+}
@@ -1,37 +0,0 @@
-# Copilot Instructions
-
-## Project overview
-
- FastAPI service that mimics FlareSolverr-style API for bypassing anti-bot pages using Camoufox + Playwright captcha solver.
- Entry point: main app in main.py; routes and request flow defined in src/endpoints.py and src/models.py.
- Browser lifecycle is owned by get_camoufox() in src/utils.py, which yields a page, solver, and context for each request.
-
-## Architecture and data flow
-
- Request flow: POST /v1 -> read_item() -> browser.goto() -> wait for load states -> detect challenge title -> solve captcha -> return LinkResponse.
- Challenge detection uses CHALLENGE_TITLES from src/consts.py; update this map when adding providers.
- Health check hits /v1 internally with <https://google.com> and fails if status is not OK.
- Logging: LogRequest middleware logs only POST /v1 timing and outcome; other paths pass through.
-
-## Key modules and patterns
-
- Models use Pydantic v2 with camelCase aliasing for responses (see src/models.py).
- LinkResponse.invalid() is the standard error response shape; keep fields consistent with FlareSolverr style.
- get_camoufox() constructs AsyncCamoufox with addons and optional proxy config from env vars.
-
-## Config and environment
-
- Core env vars in src/consts.py: HOST, PORT, PROXY_SERVER, PROXY_USERNAME, PROXY_PASSWORD, LOG_LEVEL, VERSION.
- VERSION strips leading "v" for tag-style values.
-
-## Developer workflows
-
- Local run: uv sync && uv run main.py
- Init mode: uv run main.py --init (pre-warms health check via browser setup)
- Tests: uv sync --group test && uv run pytest --retries 3
- Docker troubleshooting: docker build --target test .
-
-## Tests and external dependencies
-
- tests/main_test.py calls real websites; tests are network-dependent and may be skipped based on upstream status.
- HTTP client tests use starlette.testclient + httpx; avoid mocking unless needed for local-only changes.
@@ -1,61 +1,30 @@
-# Ubuntu is required by playwright
-FROM ubuntu:latest AS base
+FROM python:3.12-slim

-ARG GITHUB_BUILD=false \
-    VERSION
+# Inspired by https://github.com/Hudrolax/uc-docker-alpine/

-ENV GITHUB_BUILD=${GITHUB_BUILD}\
-    VERSION=${VERSION}\
+ARG GITHUB_BUILD=false
+ENV GITHUB_BUILD=${GITHUB_BUILD}
+
+ENV HOME=/root
+ENV \
    DEBIAN_FRONTEND=noninteractive \
    PYTHONUNBUFFERED=1 \
    # prevents python creating .pyc files
    PYTHONDONTWRITEBYTECODE=1 \
-    UV_LINK_MODE=copy \
-    PORT=8191 \
-    XDG_CACHE_HOME=/cache \
-    HOME=/tmp
+    # do not ask any interactive question
+    POETRY_NO_INTERACTION=1 \
+    POETRY_VIRTUALENVS_IN_PROJECT=true \
+    DISPLAY=:0

-RUN apt-get update &&\
-    apt-get install -y --no-install-recommends curl ca-certificates &&\
-    apt-get clean &&\
-    rm -rf /var/lib/apt/lists/*
-COPY --from=ghcr.io/astral-sh/uv:latest /uv /uvx /bin/
-
-FROM base AS devcontainer
-RUN apt-get update &&\
-    apt-get install -y --no-install-recommends git &&\
-    uvx playwright install-deps firefox &&\
-    uvx camoufox fetch &&\
-    apt-get clean &&\
-    rm -rf /var/lib/apt/lists/*
-ENTRYPOINT [ "sleep", "infinity" ]
-
-FROM base AS app
 WORKDIR /app
+EXPOSE 8191
+RUN apt update &&\
+    apt install -y xvfb scrot python3-tk curl chromium

-COPY pyproject.toml uv.lock ./
-RUN mkdir -p /cache &&\
-    uv sync &&\
-    uv run camoufox fetch &&\
-    apt-get update &&\
-    uv run playwright install-deps firefox &&\
-    uv cache clean &&\
-    apt-get clean &&\
-    rm -rf /var/lib/apt/lists/*
+RUN curl -sSL https://install.python-poetry.org | python3 -
+ENV PATH="${HOME}/.local/bin:$PATH"
+COPY pyproject.toml poetry.lock ./
+RUN poetry install

 COPY . .
-
-# Make app and cache world-readable; addon scripts dir world-writable (runtime writes)
-RUN chmod -R o+rX /app /cache &&\
-    find /app/.venv -path "*/camoufox_add_init_script/addon" -type d -exec chmod -R o+rwX {} +
-
-FROM app AS test
-RUN \
-    uv sync --group test &&\
-    uv run pytest --retries 3
-
-FROM app
-USER 1000
-EXPOSE $PORT
-HEALTHCHECK --interval=15m --timeout=30s --start-period=5s --retries=3 CMD curl "http://localhost:${PORT}/health"
-ENTRYPOINT ["/app/.venv/bin/python", "main.py"]
+CMD [". .venv/bin/activate && python3 main.py"]
@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
@@ -1,86 +1,56 @@
 # Byparr

-<p align="center">
-   <img src="icon/logo-byparr.svg" alt="Byparr logo" width="120" />
-</p>
+An alternative to [FlareSolverr](https://github.com/FlareSolverr/FlareSolverr) as a drop-in replacement, build with [nodriver](https://github.com/ultrafunkamsterdam/nodriver) and [FastAPI](https://fastapi.tiangolo.com).
+
+> [!WARNING]
+> Due to recent challenge changes, this software does not guarantee that the Cloudflare challenge will be bypassed. Cloudflare likely requires valid network traffic originating from the user’s public IP address to mark a connection as legitimate. While this tool may bypass the initial browser check, it does not ensure that requests will consistently pass Cloudflare's validation. More testing and data are required to understand how Cloudflare identifies connections and requests as valid. Invalid requests will result in Byparr's looping and eventually timeouting.

 > [!IMPORTANT]
-> This software does not **guarantee** (only greatly increases the chance) that any challenge will be bypassed. While this tool passes the initial browser check, Cloudflare and other captcha providers likely require valid network traffic originating from the user’s public IP address to mark a connection as legitimate. If any website does not pass the challenge, please run troubleshooting steps and check if other websites work before you create an GitHub issue.
+> Currenly, due to [bug in nodriver](https://github.com/ultrafunkamsterdam/undetected-chromedriver/issues/1954), if you want to run this project ouside of prebuild container, you have to run `python fix_nodriver.py` after creating venv to patch the library.

-## Options
+> [!NOTE]
+> Thanks to FastAPI implementation, now you can also see the API documentation at `/docs` or `/` (redirect to `/docs`) endpoints.

-| Environment Variable | Default   | Description                                                                                                                                                       |
-| -------------------- | --------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `HOST`               | `0.0.0.0` | Host address to bind the server to. Use `0.0.0.0` to bind to all IPv4 interfaces, `::` for all IPv6 interfaces, or `127.0.0.1`/`localhost` for local access only. |
-| `PORT`               | `8191`    | Port to bind the server to.                                                                                                                                       |
-| `PROXY_SERVER`       | None      | Proxy to use in format: `protocol://host:port`.                                                                                                                   |
-| `PROXY_USERNAME`     | None      | Username for proxy authentication.                                                                                                                                |
-| `PROXY_PASSWORD`     | None      | Password for proxy authentication.                                                                                                                                |
+## Early Development

-## Proxy Recommendation
+Long story short, I created it in like 3 days, so if you get any bugs/hangs etc. please report it, so both of us can enjoy unblocked websites!

-Recently I've partnered with a _new in town_ proxy service - ProxyBase - to offer affordable proxy services that seems to work seamlessly with Byparr! Using my affiliate code `byparr` (case sensitive!) when signing up will not only get you access to their cost-effective (**$0.69/GB with occasional promotions** _at the time of writing_) proxy network but will also help support the continued development of this project. ProxyBase's proxies can significantly improve your success rate when bypassing anti-bot challenges. [Check out ProxyBase](https://client.proxybase.org/signup?ref=byparr) and enhance your Byparr experience!
-
-## Tags
-
- `v*.*.*`/`latest` - Releases considered stable
- `main` - Latest release from main branch (untested)
- `pr-{number}` - Pull request images for testing (automatically cleaned up when PR closes)
-
-## Usage
-
-> [!IMPORTANT]
-> Support for NAS devices (like Synology) is minimal. Please report issues, but do not expect it to be fixed quickly. The only ARM device I have is a free Ampere Oracle VM, so I can only test ARM support on that. See [#22](https://github.com/ThePhaseless/Byparr/issues/22) and [#3](https://github.com/ThePhaseless/Byparr/issues/3)
-
-### Docker Compose setup
-
-1. Review settings in `compose.yaml`.
-2. Start the service:
-
-```bash
-docker compose up -d
-```
-
-### Docker install
-
-1. Pull and run the image:
-
-   ```bash
-   docker run -p 8191:8191 ghcr.io/thephaseless/byparr:latest
-   ```
-
-2. Optional: set env vars using `-e` or `--env-file`.
-
-### Local install
-
-1. Install ([or update when Python version changes](https://github.com/astral-sh/uv/issues/17887)) [uv](https://docs.astral.sh/uv/getting-started/installation/).
-2. Clone this repo - `git clone https://github.com/ThePhaseless/Byparr`
-3. Run `uv run main.py`
-4. Enjoy!
-
-### API Docs
-
-Once running, open:
-
- `http://localhost:8191/docs`
- `http://localhost:8191/` (redirects to `/docs`)
+I focus maily on Cloudflare, which is tested daily, any other anti-bot challenges should pass out of the box, but if any issues, please report these providers with an example website ❤️

 ## Troubleshooting

-### Docker troubleshooting
+1. Clone repo to the host that has the container has issues on.
+2. Using vscode and `SSH extention`, connect to the host and open repo in it.
+4. Download `devcontainers` extention and reopen repo in container (with `CTRL + SHIFT + P` -> `Reopen in devcontainer`)
+3. Open vscode terminal (`` CTRL + ` ``) and run `./run_vnc.sh` script.
+5. Write down the port from `Forwarded Address` in `Ports` tab in vscode (probably 5900).
+6. Open <https://novnc.com/noVNC/vnc.html> in your pc's browser and using settings on left under websocket, set host to `localhost` nad port to the port you wrote down and disable encryption.
+7. Connect to the VNC server on container.
+8. Check if `chromium` works by running in VNC's terminal command `chromium --no-sandbox`
+9. If chromium works, run (or run debug) tests from VS Code.
+10. Check if everything works by observing VNC in the browser as code is being tested.
+11. If code works, congrats! (/s) You are on your own.
+12. If it does not, try another host or network and try again.

-1. Clone repo to the host that has issues with Byparr.
-2. Run `docker build --target test .`
-3. Depending of the build success:
-   1. If run successfully, try updating container or if already on newest stable release create an issue for creating new release with new dependencies
-   2. If build fails, try troubleshooting on another host/using other method
+## Usage

-### Local troubleshooting
+### Docker Compose

-1. Download [uv](https://docs.astral.sh/uv/getting-started/installation/)
-2. Download dependencies using `uv sync --group test`
-3. Run tests with `uv run pytest --retries 3` (You can add `-n auto` for parallelization)
-4. If you see any `F` character in terminal, that means test failed even after retries.
-5. Depending of the test success:
-   1. If run successfully, try updating container or if already on newest stable release create an issue for creating new release with new dependencies
-   2. If test fails, try troubleshooting on another host/using other method
+```yaml
+services:
+  byparr:
+    image: ghcr.io/thephaseless/byparr
+    environment:
+      - LOG_LEVEL=INFO # optional
+    ports:
+      - "8191:8191" # Optional if used with *arr network
+```
+
+## Need help with / TODO
+
+- [ ] Slimming container (~3GB bruh)
+- [ ] Add more anti-bot challenges
+- [x] Add docstrings
+- [ ] Implement versioning
+- [ ] Proxy support
+- [ ] Add more architectures support
@@ -1,11 +0,0 @@
-services:
-  byparr:
-    image: ghcr.io/thephaseless/byparr:latest
-    restart: unless-stopped
-    init: true
-    build:
-      context: .
-      dockerfile: Dockerfile
-    # Uncomment below to use byparr outside of internal network
-    # ports:
-    #   - "8191:8191"
@@ -0,0 +1,10 @@
+services:
+  byparr:
+    image: ghcr.io/thephaseless/byparr
+    build:
+      context: .
+      dockerfile: Dockerfile
+    environment:
+      - LOG_LEVEL=INFO
+    ports:
+      - "8191:8191"
@@ -0,0 +1,65 @@
+# https://github.com/ultrafunkamsterdam/undetected-chromedriver/issues/1954
+# Fix for nodriver in .venv/lib/python3.11/site-packages/nodriver/core/browser.py
+from __future__ import annotations
+
+import logging
+import os
+from pathlib import Path
+from platform import python_version
+
+env_path = os.getenv("VIRTUAL_ENV")
+if env_path is None:
+    env_path = Path(os.__file__).parent.parent.parent.as_posix()
+python_version = python_version().split(".")[0:2]
+nodriver_path = Path(env_path + f"/lib/python{'.'.join(python_version)}/site-packages/nodriver/cdp/network.py")
+if not nodriver_path.exists():
+    msg = f"{nodriver_path} not found"
+    raise FileNotFoundError(msg)
+
+new_cookie_partition_key = """\
+        if isinstance(json, str):
+            return cls(top_level_site=json, has_cross_site_ancestor=False)
+        elif isinstance(json, dict):
+            return cls(
+                top_level_site=str(json["topLevelSite"]),
+                has_cross_site_ancestor=bool(json["hasCrossSiteAncestor"]),
+            )
+"""
+
+logger = logging.getLogger(__name__)
+handler = logging.StreamHandler()
+logger.addHandler(handler)
+logger.setLevel(logging.INFO)
+logger.info(f"Fixing nodriver in {nodriver_path}")
+# delete CookiePartitionKey declaration
+with nodriver_path.open("r+") as f:
+    lines = f.readlines()
+    found_def = False
+    found_body = False
+    i = -1
+    while i < len(lines):
+        i += 1
+        line = lines[i]
+        strip_line = line.strip("\n")
+        if not found_def and line.startswith("class CookiePartitionKey:"):
+            logger.info(f"Found line {i}: {strip_line}")
+            found_def = True
+            continue
+        if found_def:
+            if line.startswith("    def from_json"):
+                logger.info(f"Found line {i}: {strip_line}")
+                found_body = True
+                continue
+            if found_body:
+                if line.startswith(("\t\t", "        ")):
+                    logger.info(f"Removing line {i}: {strip_line}")
+                    lines.pop(i)
+                    i -= 1
+                    continue
+                else:
+                    lines = lines[:i] + [new_cookie_partition_key] + lines[i:]
+                    break
+
+
+with nodriver_path.open("w") as f:
+    f.writelines(lines)
@@ -1 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" xml:space="preserve" viewBox="0 0 512 512"><path d="M243.9 511.9c-58.1-3.2-110.4-24-155-61.8-7-5.9-21.2-20.1-27.2-27.2-20-23.7-35.2-49.2-45.4-76.5-8.3-22-13-42.6-15.5-67.3-1.1-10.8-1.1-35.7 0-46.5 5.6-54.9 25.6-101.9 61-143.8 5.9-7 20.1-21.2 27.2-27.2 23.7-20 49.2-35.2 76.5-45.4 22-8.3 42.7-13 67.3-15.5 10.8-1.1 35.7-1.1 46.5 0 29.1 3 55.1 9.7 80 20.7 39.2 17.3 72.8 43.6 99.6 78 5.3 6.7 14.8 21 19.4 29.1 15.8 27.6 26.4 58.3 31.1 89.8 2 13.6 2.5 21.5 2.5 37.5s-.5 23.9-2.5 37.5c-7.1 47.8-27.1 91.6-59.2 129.5-5.9 7-20.1 21.2-27.2 27.2-16.4 13.8-34.2 25.8-51.8 34.6-28.8 14.5-59.1 23.1-91.7 26.3-7.4.8-28.9 1.3-35.6 1" style="fill:#fff"/><path d="M246.5 395.1c-1.7-.2-3.9-.3-5-.2-1 .1-3.5 0-5.5-.2-2-.3-6.1-.8-9.3-1.2s-6.7-.9-7.8-1.2c-1.2-.3-7.7-3.2-14.5-6.6s-14.3-7-16.8-8.1c-8.5-3.7-14.5-8.1-18.1-13.4-2.1-3.1-3.7-4.4-8.2-6.7-4-2-6-4.1-10.9-11-2-2.9-5-6.8-6.6-8.7-10.9-12.9-11.1-13.3-12.4-19.5-.5-2.5-1.6-5.4-2.9-7.8-4-7.4-5.4-10.8-6.4-14.9-.5-2.3-1.7-6.6-2.6-9.6-1.5-5.1-1.7-6.1-2.1-15.8-.4-9.4-.4-10.9.5-16.1.5-3.2 1.1-7.4 1.2-9.4.2-2 .6-5.4 1-7.6s.9-6.5 1.2-9.5c1-9.8 2.6-14.1 9.1-23.8 4.2-6.2 5.2-8.5 6-13.5.6-3.9 1.4-5.7 4.1-8.9 1.2-1.5 3.5-5.4 5.1-8.6 3.1-6.4 3.2-6.5 8.2-9.9 1.9-1.3 5.8-4 8.6-6s6.3-4.4 7.6-5.4c1.7-1.2 3.1-2.7 4.3-4.6 4.1-6.6 6.1-8 16.3-11.7 3.1-1.1 7.5-3.1 9.8-4.5 5.3-3.1 9-4.4 15-5 2.8-.3 6.8-1.2 9.8-2.1 4.5-1.4 5.6-1.6 10.4-1.6 5.7 0 6.4-.2 13.2-3.1 4.8-2.1 8.9-2.5 14.8-1.5 2.7.5 7.2 1.1 10.1 1.5 6.2.8 6.1.8 11.2 3.1 3.4 1.5 4.9 1.9 9.3 2.3 7 .7 7.9 1 16.1 5.1 3.9 2 9.5 4.5 12.4 5.7 9.8 3.9 14.3 7.2 22.1 15.7 3.3 3.6 8.6 9.2 11.9 12.5 14.5 14.5 14.9 15 16.5 19.4.8 2.2 2.6 6 3.9 8.3 5.2 9.2 12.2 23.8 13.4 28 .7 2.3 1.9 6.5 2.7 9.3 2.1 6.9 2.4 14.2 1 23.6-1.2 8-1.2 11.9-.3 18 .6 3.6.6 5.5.3 9.4-.7 6.7-1.6 10-4.1 14.1-1.3 2.2-2.4 4.7-2.9 6.6-1.8 7.8-5.6 16.3-10.7 24.3-1.4 2.2-3.4 5.5-4.3 7.4-2.2 4.3-4.2 6.6-8.2 9.6-3.7 2.7-14.5 14-17.7 18.4-2.2 3.1-7.1 7.4-10.6 9.4-1.1.6-4.3 1.8-7.2 2.6s-7.1 2.5-9.5 3.7c-3.6 1.8-5 3-8.6 6.6-2.3 2.4-4.9 4.7-5.7 5.1-1.6.8-5.5 1.5-10.7 2-1.7.2-4.6.8-6.4 1.5-7 2.6-7.3 2.6-16.1 2.7-6.9.1-9.3.3-12.3 1.2-4.9.9-8.8 1.2-12.7.6" style="fill:#cc7a3d"/><path d="M237.7 473.6c-42-3.8-79.9-18.3-113-43.2C56 378.7 24.1 291.7 43.1 207.6c6.6-29.2 19.8-57.8 37.7-81.9 47.7-64.1 126.8-97.1 205.8-85.9 36 5.1 70.5 19.3 99.7 41C455.7 132.5 488 220 468.9 304.4c-11.4 50.4-40.9 95.7-82.6 126.8-29.1 21.7-63.7 35.9-99.7 41-15.1 2.2-34.5 2.7-48.9 1.4m33.7-5.2c29-2.5 54.4-9.5 79-21.8 41.4-20.6 75.5-54.8 96.1-96.1 16.9-34 24.9-74.2 21.8-109.9-3.7-42.4-17.6-79.2-42.3-112-34.4-45.8-84.7-75.5-141.4-83.5-25.2-3.6-49.5-2.5-75.2 3.3-49.6 11.2-93.7 40-124.4 81.2-21.3 28.7-35 62-40.1 97.8-2.8 19.4-2.8 38 0 57.4 8.1 56.7 37.7 107 83.5 141.4 11.1 8.3 21 14.5 33 20.5 34.1 16.9 74.4 24.8 110 21.7" style="fill:#b1b1b1"/><path d="M253.9 367.3c-2.9-.7-4.3-1.4-6-2.9-2.9-2.6-3.9-4.9-3.9-8.9 0-3.9 1-6.3 3.9-8.9 6-5.4 15.8-3.1 19 4.3 1.1 2.6 1 7-.3 9.6-1.2 2.4-3.7 4.9-6 5.8-1.7.8-5.3 1.3-6.7 1m68.4-29.3c-9.2-3.4-11-15.4-3.1-21.1 8.1-5.9 20 1 18.8 11-.5 4-3 7.6-6.7 9.5-2.4 1.2-6.6 1.5-9 .6m-139.8-.2c-3.4-1.1-6.2-3.5-7.9-6.7-1.3-2.4-1.2-7.7.2-10.2 1.2-2.3 3.9-4.8 6.3-5.8 2.6-1.1 7-1 9.6.3 4.2 2.1 6.7 6 6.7 10.7 0 6.5-4.7 11.5-11 11.9-1.5.1-3.3 0-3.9-.2m43.2-22.8c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m54.6 0c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m-27.6-47c-2.2-.7-4-1.9-5.5-3.5-2.5-2.7-3.2-4.5-3.2-8.5 0-3.9.7-5.8 3.2-8.5s4.8-3.6 8.8-3.6 6.3.9 8.8 3.6 3.2 4.5 3.2 8.5c0 2.5-.3 4-.9 5.2-1.2 2.3-3.5 4.7-5.7 5.8-1.9 1.1-6.7 1.6-8.7 1m99.7 0c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m-198.9-.7c-8.9-2.5-11.8-13.8-5.1-20.1 2.6-2.5 4.5-3.2 8.2-3.2 3.9 0 6.3 1 8.9 3.9 2.1 2.3 3 4.7 2.9 8.2 0 7.6-7.5 13.2-14.9 11.2m42.9-.4c-2.3-1.2-5.2-4.1-6.1-6.4-1-2.4-.9-7.1.3-9.5 1.1-2.3 4.1-5.2 6.4-6.2 2.4-1 7.1-.9 9.5.3 2.3 1.1 5.2 4.1 6.2 6.4 1 2.4.9 7.1-.3 9.5-1.1 2.3-4.1 5.2-6.4 6.2-2.5 1.1-7.2.9-9.6-.3m109-.3c-11.1-5.6-7-22.5 5.5-22.4 3.7 0 6.1 1.1 8.6 3.9 2.2 2.4 3.2 4.9 3.2 8s-1 5.6-3.2 8c-2.5 2.8-5 3.9-8.6 3.9-2.3-.1-3.5-.4-5.5-1.4m-79.7-46.3c-8.9-2.5-11.8-13.8-5.1-20.1 2.6-2.5 4.5-3.2 8.2-3.2 3.9 0 6.3 1 8.9 3.9 2.1 2.3 3 4.7 2.9 8.2-.1 7.6-7.6 13.3-14.9 11.2m54.5 0c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.1-8.6 7.8-13.9 6.3m43.2-22.8c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.2-8.6 7.8-13.9 6.3m-140.6-.5c-8.7-2.4-11.6-13-5.4-19.7 2.5-2.6 4.8-3.6 8.6-3.6 3.9 0 6.3 1.1 8.8 3.8 2.2 2.5 3 4.7 3 8 .1 8-7.3 13.6-15 11.5m70.3-28.9c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.1-8.5 7.8-13.9 6.3" style="fill:#884717"/></svg>
@@ -1,41 +1,84 @@
 from __future__ import annotations

-import asyncio
 import logging
-import sys
+import time

-import uvicorn
-from fastapi import FastAPI
-from fastapi.middleware.gzip import GZipMiddleware
+import uvicorn.config
+from bs4 import BeautifulSoup
+from fastapi import FastAPI, HTTPException
+from fastapi.responses import RedirectResponse
+from sbase import SB, BaseCase

-from src.consts import HOST, LOG_LEVEL, PORT, VERSION
-from src.endpoints import health_check, router
-from src.middlewares import LogRequest
-from src.utils import get_camoufox, logger
-
-logger.info("Using version %s", VERSION)
-logger.info("Log level set to %s", logging.getLevelName(LOG_LEVEL))
+import src
+import src.utils
+import src.utils.consts
+from src.models.requests import LinkRequest, LinkResponse, Solution
+from src.utils import logger
+from src.utils.consts import LOG_LEVEL

 app = FastAPI(debug=LOG_LEVEL == logging.DEBUG, log_level=LOG_LEVEL)
-app.add_middleware(GZipMiddleware)
-app.add_middleware(LogRequest)
-
-app.include_router(router=router)


-async def init():
-    """Initialize the application."""
-    async for browser in get_camoufox():
-        await health_check(browser)
+@app.get("/")
+def read_root():
+    """Redirect to /docs."""
+    logger.info("Redirecting to /docs")
+    return RedirectResponse(url="/docs", status_code=301)
+
+
+@app.get("/health")
+async def health_check():
+    """Health check endpoint."""
+    logger.info("Health check")
+    # browser: Chrome = await new_browser()
+    # browser.get("https://google.com")
+    # browser.stop()
+    return {"status": "ok"}
+
+
+@app.post("/v1")
+def read_item(request: LinkRequest):
+    """Handle POST requests."""
+    start_time = int(time.time() * 1000)
+    # request.url = "https://nowsecure.nl"
+    logger.info(f"Request: {request}")
+    response: LinkResponse
+
+    # start_time = int(time.time() * 1000)
+    with SB(uc=True, locale_code="en", test=False, xvfb=True, ad_block=True) as sb:
+        sb: BaseCase
+        sb.uc_open_with_reconnect(request.url)
+        sb.uc_gui_click_captcha()
+        logger.info(f"Got webpage: {request.url}")
+        sb.save_screenshot("screenshot.png")
+        logger.info(f"Got webpage: {request.url}")
+
+        source = sb.get_page_source()
+        source_bs = BeautifulSoup(source, "html.parser")
+        title_tag = source_bs.title
+        if title_tag is None:
+            raise HTTPException(status_code=500, detail="Title tag not found")
+
+        if title_tag.string in src.utils.consts.CHALLENGE_TITLES:
+            raise HTTPException(status_code=500, detail="Could not bypass challenge")
+
+        title = title_tag.string
+        logger.info(f"Title: {title}")
+        response = LinkResponse(
+            message="Success",
+            solution=Solution(
+                userAgent=sb.get_user_agent(),
+                url=sb.get_current_url(),
+                status=200,
+                cookies=sb.get_cookies(),
+                headers={},
+                response=source,
+            ),
+            startTimestamp=start_time,
+        )
+
+    return response


 if __name__ == "__main__":
-    # Check for --init flag to run the app in development mode
-    if "--init" in sys.argv:
-        logger.info("Running initialization script...")
-        loop = asyncio.new_event_loop()
-        asyncio.set_event_loop(loop)
-        loop.run_until_complete(init())
-        logger.info("Initialization complete.")
-    else:
-        uvicorn.run(app, host=HOST, port=PORT)
+    uvicorn.run(app, host="0.0.0.0", port=8191, log_level=LOG_LEVEL)  # noqa: S104
@@ -0,0 +1,3 @@
+[virtualenvs]
+in-project = true
+create = true
@@ -1,33 +1,27 @@
-# cspell:disable
-[project]
-authors = [{ name = "ThePhaseless", email = "kukubaorch@gmail.com" }]
-license = { text = "LICENSE" }
-requires-python = "==3.14.*"
-name = "Byparr"
+[tool.poetry]
+name = "byparr"
 version = "0.1.0"
-description = "API for getting cookies for Cloudflare challenges"
+description = ""
+package-mode = false
+authors = ["Your Name <you@example.com>"]
 readme = "README.md"
-dependencies = [
-    "camoufox[geoip]==0.4.*",
-    "fastapi[standard]==0.135.*",
-    "playwright-captcha==0.1.*",
-    "pydantic==2.*",
-]
-urls = { repository = "https://github.com/ThePhaseless/Byparr" }

-[dependency-groups]
-test = [
-    "httpx==0.28.*",
-    "pytest==9.0.*",
-    "pytest-asyncio==1.3.*",
-    "pytest-retry==1.7.*",
-    "pytest-xdist==3.8.*",
-    "setuptools>=80.9.0",
-]
-dev = ["deptry==0.25.*", "ruff==0.15.*"]
+[tool.poetry.dependencies]
+python = "^3.12"
+pytest = "^8"
+fastapi = { extras = ["standard"], version = "^0" }
+requests = "^2"
+httpx = "^0.27"
+pytest-asyncio = "^0"
+ruff = "^0.8.0"
+seleniumbase = "^4.32.12"
+pyautogui = "^0.9.54"
+beautifulsoup4 = "^4.12.3"

-[tool.deptry.per_rule_ignores]
-DEP002 = ["pyautogui"]
+
+[build-system]
+requires = ["poetry-core"]
+build-backend = "poetry.core.masonry.api"

 [tool.ruff.lint]
 ignore = [
@@ -58,6 +52,8 @@ ignore = [
 select = ["ALL"]
 extend-safe-fixes = ["D415"]

-[tool.pyright]
-reportMissingTypeStubs = false
-typeCheckingMode = "strict"
+[tool.pytest]
+log_cli = "True"
+
+[tool.pytest.ini_options]
+asyncio_default_fixture_loop_scope = "function"
@@ -1,11 +0,0 @@
-{
-  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
-  "extends": ["config:recommended"],
-  "forkProcessing": "enabled",
-  "packageRules": [
-    {
-      "automerge": true,
-      "matchUpdateTypes": ["minor", "patch"]
-    }
-  ]
-}
@@ -1,32 +0,0 @@
-import logging
-import os
-import sys
-from pathlib import Path
-
-from playwright_captcha import CaptchaType
-from playwright_captcha.utils.camoufox_add_init_script.add_init_script import (
-    get_addon_path,
-)
-
-LOG_LEVEL = logging.getLevelNamesMapping()[os.getenv("LOG_LEVEL", "INFO").upper()]
-
-VERSION = os.getenv("VERSION", "unknown").removeprefix("v")
-
-ADDON_PATH = str(Path(get_addon_path()).absolute())
-MAX_ATTEMPTS = sys.maxsize
-
-PROXY_SERVER = os.getenv("PROXY_SERVER")
-PROXY_USERNAME = os.getenv("PROXY_USERNAME")
-PROXY_PASSWORD = os.getenv("PROXY_PASSWORD")
-
-HOST = os.getenv("HOST", "0.0.0.0")  # noqa: S104
-PORT = int(os.getenv("PORT", "8191"))
-
-CHALLENGE_TITLES_MAP: dict[CaptchaType, list[str]] = {
-    # Cloudflare
-    CaptchaType.CLOUDFLARE_INTERSTITIAL: ["Just a moment..."],
-}
-
-CHALLENGE_TITLES = [
-    title for titles in CHALLENGE_TITLES_MAP.values() for title in titles
-]
@@ -1,106 +0,0 @@
-import time
-import warnings
-from asyncio import wait_for
-from http import HTTPStatus
-from typing import Annotated
-
-from fastapi import APIRouter, Depends, HTTPException
-from fastapi.responses import RedirectResponse
-from playwright_captcha import CaptchaType
-
-from src.consts import CHALLENGE_TITLES
-from src.models import (
-    HealthcheckResponse,
-    LinkRequest,
-    LinkResponse,
-    Solution,
-)
-from src.utils import CamoufoxDepClass, TimeoutTimer, get_camoufox, logger
-
-warnings.filterwarnings("ignore", category=SyntaxWarning)
-
-
-router = APIRouter()
-
-CamoufoxDep = Annotated[CamoufoxDepClass, Depends(get_camoufox)]
-
-
-@router.get("/", include_in_schema=False)
-def read_root():
-    """Redirect to /docs."""
-    logger.debug("Redirecting to /docs")
-    return RedirectResponse(url="/docs", status_code=301)
-
-
-@router.get("/health")
-async def health_check(sb: CamoufoxDep):
-    """Health check endpoint."""
-    health_check_request = await read_item(
-        LinkRequest.model_construct(url="https://google.com"),
-        sb,
-    )
-
-    if health_check_request.solution.status != HTTPStatus.OK:
-        raise HTTPException(
-            status_code=500,
-            detail="Health check failed",
-        )
-
-    return HealthcheckResponse(user_agent=health_check_request.solution.user_agent)
-
-
-@router.post("/v1")
-async def read_item(request: LinkRequest, dep: CamoufoxDep) -> LinkResponse:
-    """Handle POST requests."""
-    start_time = int(time.time() * 1000)
-
-    timer = TimeoutTimer(duration=request.max_timeout)
-
-    request.url = request.url.replace('"', "").strip()
-    try:
-        page_request = await dep.page.goto(
-            request.url, timeout=timer.remaining() * 1000
-        )
-        status = page_request.status if page_request else HTTPStatus.OK
-        await dep.page.wait_for_load_state(
-            state="domcontentloaded", timeout=timer.remaining() * 1000
-        )
-        await dep.page.wait_for_load_state(
-            "networkidle", timeout=timer.remaining() * 1000
-        )
-
-        if await dep.page.title() in CHALLENGE_TITLES:
-            logger.info("Challenge detected, attempting to solve...")
-            # Solve the captcha
-            await wait_for(
-                dep.solver.solve_captcha(  # pyright: ignore[reportUnknownMemberType,reportUnknownArgumentType]
-                    captcha_container=dep.page,
-                    captcha_type=CaptchaType.CLOUDFLARE_INTERSTITIAL,
-                    wait_checkbox_attempts=1,
-                    wait_checkbox_delay=0.5,
-                ),
-                timeout=timer.remaining(),
-            )
-            status = HTTPStatus.OK
-            logger.debug("Challenge solved successfully.")
-    except TimeoutError as e:
-        logger.error("Timed out while solving the challenge")
-        raise HTTPException(
-            status_code=408,
-            detail="Timed out while solving the challenge",
-        ) from e
-
-    cookies = await dep.context.cookies()
-
-    return LinkResponse(
-        message="Success",
-        solution=Solution(
-            user_agent=await dep.page.evaluate("navigator.userAgent"),
-            url=dep.page.url,
-            status=status,
-            cookies=cookies,
-            headers=page_request.headers if page_request else {},
-            response=await dep.page.content(),
-        ),
-        start_timestamp=start_time,
-    )
@@ -1,30 +0,0 @@
-import time
-from http import HTTPStatus
-
-from fastapi import Request
-from starlette.middleware.base import BaseHTTPMiddleware, RequestResponseEndpoint
-
-from src.models import LinkRequest
-from src.utils import logger
-
-
-class LogRequest(BaseHTTPMiddleware):
-    async def dispatch(self, request: Request, call_next: RequestResponseEndpoint):
-        """Log requests."""
-        if request.url.path != "/v1" or request.method != "POST":
-            return await call_next(request)
-
-        start_time = time.perf_counter()
-        request_body = LinkRequest.model_validate(await request.json())
-        logger.info(
-            f"From: {request.client.host if request.client else 'unknown'} at {time.strftime('%Y-%m-%d %H:%M:%S')}: {request_body.url}"
-        )
-        response = await call_next(request)
-        process_time = time.perf_counter() - start_time
-
-        if response.status_code == HTTPStatus.OK:
-            logger.info(f"Done {request_body.url} in {process_time:.2f}s")
-        else:
-            logger.warning(f"Failed {request_body.url} in {process_time:.2f}s")
-
-        return response
@@ -1,64 +0,0 @@
-from __future__ import annotations
-
-import time
-from http.client import INTERNAL_SERVER_ERROR
-from typing import Any
-
-from playwright.sync_api import Cookie
-from pydantic import BaseModel, Field
-from pydantic.alias_generators import to_camel
-
-from src import consts
-
-
-class LinkRequest(BaseModel):
-    cmd: str = Field(
-        default="request.get",
-        description="Type of request, currently only supports GET requests. This string is purely for compatibility with FlareSolverr.",
-    )
-    url: str = Field(pattern=r"^https?://", default="https://")
-    max_timeout: int = Field(
-        default=60,
-        description="Maximum timeout in seconds for resolving the anti-bot challenge.",
-    )
-
-
-class HealthcheckResponse(BaseModel):
-    model_config = {"alias_generator": to_camel, "populate_by_name": True}
-    msg: str = "Byparr is working!"
-    version: str = consts.VERSION
-    user_agent: str
-
-
-class Solution(BaseModel):
-    model_config = {"alias_generator": to_camel, "populate_by_name": True}
-    url: str
-    status: int
-    cookies: list[Cookie] = []
-    user_agent: str = ""
-    headers: dict[str, Any] = {}
-    response: str = ""
-
-
-class LinkResponse(BaseModel):
-    model_config = {"alias_generator": to_camel, "populate_by_name": True}
-    status: str = "ok"
-    message: str
-    solution: Solution
-    start_timestamp: int
-    end_timestamp: int = Field(default_factory=lambda: int(time.time() * 1000))
-    version: str = consts.VERSION
-
-    @classmethod
-    def invalid(cls, url: str):
-        """
-        Return an invalid LinkResponse with default error values.
-
-        This method is used to generate a response indicating an invalid request.
-        """
-        return cls(
-            status="error",
-            message="Invalid request",
-            solution=Solution(url=url, status=INTERNAL_SERVER_ERROR),
-            start_timestamp=int(time.time() * 1000),
-        )
@@ -0,0 +1,95 @@
+from __future__ import annotations
+
+from pydantic import BaseModel
+
+
+class Author(BaseModel):
+    login: str
+    id: int
+    node_id: str
+    avatar_url: str
+    gravatar_id: str
+    url: str
+    html_url: str
+    followers_url: str
+    following_url: str
+    gists_url: str
+    starred_url: str
+    subscriptions_url: str
+    organizations_url: str
+    repos_url: str
+    events_url: str
+    received_events_url: str
+    type: str
+    site_admin: bool
+
+
+class Uploader(BaseModel):
+    login: str
+    id: int
+    node_id: str
+    avatar_url: str
+    gravatar_id: str
+    url: str
+    html_url: str
+    followers_url: str
+    following_url: str
+    gists_url: str
+    starred_url: str
+    subscriptions_url: str
+    organizations_url: str
+    repos_url: str
+    events_url: str
+    received_events_url: str
+    type: str
+    site_admin: bool
+
+
+class Asset(BaseModel):
+    url: str
+    id: int
+    node_id: str
+    name: str
+    label: str | None
+    uploader: Uploader
+    content_type: str
+    state: str
+    size: int
+    download_count: int
+    created_at: str
+    updated_at: str
+    browser_download_url: str
+
+
+class Reactions(BaseModel):
+    url: str
+    total_count: int
+
+    laugh: int
+    hooray: int
+    confused: int
+    heart: int
+    rocket: int
+    eyes: int
+
+
+class GithubResponse(BaseModel):
+    url: str
+    assets_url: str
+    upload_url: str
+    html_url: str
+    id: int
+    author: Author
+    node_id: str
+    tag_name: str
+    target_commitish: str
+    name: str
+    draft: bool
+    prerelease: bool
+    created_at: str
+    published_at: str
+    assets: list[Asset]
+    tarball_url: str
+    zipball_url: str
+    body: str
+    reactions: Reactions
@@ -0,0 +1,61 @@
+from __future__ import annotations
+
+import time
+from http import HTTPStatus
+from typing import Any
+
+from pydantic import BaseModel
+
+
+class LinkRequest(BaseModel):
+    cmd: str
+    url: str
+    maxTimeout: int  # noqa: N815 # Ignore to preserve compatibility
+
+
+class ProtectionTriggeredError(Exception):
+    pass
+
+
+class Solution(BaseModel):
+    url: str
+    status: int
+    cookies: list
+    userAgent: str  # noqa: N815 # Ignore to preserve compatibility
+    headers: dict[str, Any]
+    response: str
+
+    @classmethod
+    def empty(cls):
+        return cls(
+            url="",
+            status=HTTPStatus.INTERNAL_SERVER_ERROR,
+            cookies=[],
+            userAgent="",
+            headers={},
+            response="",
+        )
+
+
+class LinkResponse(BaseModel):
+    status: str = "ok"
+    message: str
+    solution: Solution
+    startTimestamp: int  # noqa: N815 # Ignore to preserve compatibility
+    endTimestamp: int = int(time.time() * 1000)  # noqa: N815 # Ignore to preserve compatibility
+    version: str = "3.3.21"  # TODO: Implement versioning
+
+    @classmethod
+    def invalid(cls):
+        return cls(
+            status="error",
+            message="Invalid request",
+            solution=Solution.empty(),
+            startTimestamp=int(time.time() * 1000),
+            endTimestamp=int(time.time() * 1000),
+            version="3.3.21",
+        )
+
+
+class NoChromeExtensionError(Exception):
+    """No chrome extention found."""
@@ -1,116 +0,0 @@
-import logging
-import time
-from collections.abc import AsyncGenerator
-from typing import Annotated, NamedTuple, cast
-
-from camoufox import AsyncCamoufox
-from fastapi import Header
-from playwright.async_api import Browser, BrowserContext, Page
-from playwright_captcha import (
-    ClickSolver,
-    FrameworkType,
-)
-from pydantic import BaseModel, Field
-
-from src.consts import (
-    ADDON_PATH,
-    LOG_LEVEL,
-    MAX_ATTEMPTS,
-    PROXY_PASSWORD,
-    PROXY_SERVER,
-    PROXY_USERNAME,
-)
-
-solver_logger = logging.getLogger("playwright_captcha")
-solver_logger.handlers.clear()
-if LOG_LEVEL == logging.DEBUG:
-    solver_logger.addHandler(logging.StreamHandler())
-    solver_logger.setLevel(LOG_LEVEL)
-else:
-    solver_logger.handlers.append(logging.NullHandler())
-
-logger = logging.getLogger("uvicorn.error")
-logger.setLevel(LOG_LEVEL)
-if len(logger.handlers) == 0:
-    logger.addHandler(logging.StreamHandler())
-
-
-class TimeoutTimer(BaseModel):
-    duration: int  # in seconds
-    start_time: float = Field(default_factory=time.perf_counter)
-
-    def remaining(self) -> float:
-        """Get remaining time in seconds."""
-        return max(0, self.duration - (time.perf_counter() - self.start_time))
-
-
-class CamoufoxDepClass(NamedTuple):
-    page: Page
-    solver: ClickSolver
-    context: BrowserContext
-
-
-async def get_camoufox(
-    x_proxy_server: Annotated[
-        str | None,
-        Header(
-            alias="X-Proxy-Server",
-            description="Override proxy server for this request in protocol://host:port format.",
-        ),
-    ] = None,
-    x_proxy_username: Annotated[
-        str | None,
-        Header(
-            alias="X-Proxy-Username",
-        ),
-    ] = None,
-    x_proxy_password: Annotated[
-        str | None,
-        Header(
-            alias="X-Proxy-Password",
-        ),
-    ] = None,
-) -> AsyncGenerator[CamoufoxDepClass]:
-    """Get Camoufox instance."""
-    header_server = x_proxy_server
-    header_username = x_proxy_username
-    header_password = x_proxy_password
-
-    proxy_config = None
-
-    if header_server:
-        proxy_config = {
-            "server": header_server,
-            "username": header_username,
-            "password": header_password,
-        }
-    elif PROXY_SERVER:
-        proxy_config = {
-            "server": PROXY_SERVER,
-            "username": PROXY_USERNAME,
-            "password": PROXY_PASSWORD,
-        }
-
-    async with AsyncCamoufox(
-        main_world_eval=True,
-        addons=[ADDON_PATH],
-        geoip=True,
-        proxy=proxy_config,
-        locale="en-US",
-        headless=True,
-        humanize=True,
-        i_know_what_im_doing=True,
-        config={"forceScopeAccess": True},  # add this when creating Camoufox instance
-        disable_coop=True,  # add this when creating Camoufox instance
-    ) as browser_raw:
-        # Cast to Browser since AsyncCamoufox always returns a Browser, not BrowserContext
-        browser = cast("Browser", browser_raw)
-        context = await browser.new_context()
-        page = await context.new_page()
-        async with ClickSolver(
-            framework=FrameworkType.CAMOUFOX,
-            page=page,
-            max_attempts=MAX_ATTEMPTS,
-            attempt_delay=1,
-        ) as solver:
-            yield CamoufoxDepClass(page, solver, context)
@@ -0,0 +1,8 @@
+import logging
+
+from src.utils.consts import LOG_LEVEL
+
+logger = logging.getLogger("uvicorn.error")
+logger.setLevel(LOG_LEVEL)
+if len(logger.handlers) == 0:
+    logger.addHandler(logging.StreamHandler())
@@ -0,0 +1,12 @@
+import logging
+import os
+
+LOG_LEVEL = os.getenv("LOG_LEVEL") or "INFO"
+LOG_LEVEL = logging.getLevelNamesMapping()[LOG_LEVEL.upper()]
+
+CHALLENGE_TITLES = [
+    # Cloudflare
+    "Just a moment...",
+    # DDoS-GUARD
+    "DDoS-Guard",
+]
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-uv run pytest --retries 3 -n auto
@@ -1,61 +1,50 @@
 from http import HTTPStatus
-from json import JSONDecodeError

 import httpx
 import pytest
 from starlette.testclient import TestClient

 from main import app
-from src.models import LinkRequest
+from src.models.requests import LinkRequest

 client = TestClient(app)

 test_websites = [
+    "https://btmet.com/",
    "https://ext.to/",
-    # "https://www.ygg.re/",
-    "https://extratorrent.st/",
-    "https://speed.cd/login",
-    'https://www.yggtorrent.top/engine/search?do=search&order=desc&sort=publish_date&name="UNESCAPED"+"DOUBLEQUOTES"&category=2145',
-    "https://1337x.to/home/",
 ]

+# Not testable on github actions
+github_restricted = [
+    "https://www.ygg.re/",
+    "https://extratorrent.st/",
+    "https://idope.se/",
+    "https://speed.cd/login",
+]
+
+# if os.getenv("GITHUB_ACTIONS") != "true":
+test_websites.extend(github_restricted)
+

@pytest.mark.parametrize("website", test_websites)
 def test_bypass(website: str):
-    """
-    Tests if the service can bypass cloudflare/DDOS-GUARD on given websites.
-
-    This test is skipped if the website is not reachable or does not have cloudflare/DDOS-GUARD.
-    """
    test_request = httpx.get(
        website,
    )
    if (
-        test_request.status_code >= HTTPStatus.INTERNAL_SERVER_ERROR
+        test_request.status_code != HTTPStatus.OK
        and "Just a moment..." not in test_request.text
    ):
-        try:
-            error_details = test_request.json()
-        except JSONDecodeError:
-            error_details = test_request.text
-        pytest.skip(
-            f"Skipping {website} - ({test_request.status_code}) {error_details}"
-        )
+        pytest.skip(f"Skipping {website} due to {test_request.status_code}")

    response = client.post(
        "/v1",
-        json=LinkRequest.model_construct(url=website, cmd="request.get").model_dump(),
+        json=LinkRequest(url=website, maxTimeout=30, cmd="request.get").model_dump(),
    )

    assert response.status_code == HTTPStatus.OK


 def test_health_check():
-    """
-    Tests the health check endpoint.
-
-    This test ensures that the health check
-    endpoint returns HTTPStatus.OK.
-    """
    response = client.get("/health")
    assert response.status_code == HTTPStatus.OK
Author	SHA1	Message	Date
ThePhaseless	471f17a0d3	Merge pull request #20 from ThePhaseless/seleniumbase Seleniumbase	2024-11-25 00:07:12 +01:00
ThePhaseless	c81b93a161	add title parsing	2024-11-24 23:04:19 +00:00
ThePhaseless	f2532385d6	run test on x64 and build with buildx	2024-11-24 22:50:04 +00:00
ThePhaseless	8d9f433aca	use chromium	2024-11-24 22:28:08 +00:00
ThePhaseless	52ad4c74c7	add xvfb to devcontainer	2024-11-24 22:27:01 +00:00
ThePhaseless	b64ff25ad2	build on arm	2024-11-24 22:17:35 +00:00
ThePhaseless	8b9ef2604a	fix dockerfile and add arm for testing	2024-11-24 22:13:47 +00:00
ThePhaseless	57dbc43697	add sudo	2024-11-24 22:02:28 +00:00
ThePhaseless	77fd2a47f7	remaster	2024-11-24 22:00:58 +00:00
ThePhaseless	0e75f2a3d1	cleanup devcontainer	2024-11-24 20:14:04 +00:00
ThePhaseless	d0a1489898	spellcheck fixes	2024-11-24 12:29:06 +00:00
ThePhaseless	583f5fcebc	Merge pull request #17 from Vrtak-CZ/log-err log error when exception	2024-11-23 11:38:20 +01:00
Patrik Votoček	3c25ce471b	log error when exception	2024-11-22 02:16:59 +01:00
ThePhaseless	b01ee50444	skip tests on github arm	2024-11-21 22:59:27 +00:00
ThePhaseless	f117e4705a	add platform label	2024-11-21 22:38:34 +00:00
ThePhaseless	b19b1b852c	add armv8	2024-11-21 22:33:47 +00:00
ThePhaseless	70d78859ad	add platform	2024-11-21 22:00:38 +00:00
ThePhaseless	f5c3cae846	use latest package versions	2024-10-28 17:20:37 +00:00
ThePhaseless	db18c01f51	Update bug_report.md	2024-10-27 20:14:34 +01:00
ThePhaseless	3991a0bceb	Update issue templates	2024-10-27 20:11:56 +01:00
ThePhaseless	88abca13c5	Update README.md	2024-10-27 20:03:07 +01:00
ThePhaseless	3b7f501404	Add info about conditional passing and updated troubleshooting	2024-10-27 20:01:09 +01:00
ThePhaseless	e41c831c73	separated github dependent websites	2024-10-27 18:46:19 +00:00
ThePhaseless	c409ca22f9	remove untestable websites from github	2024-10-27 18:43:36 +00:00
ThePhaseless	8e5b7061e8	test if cloudflare blocks after 2 requests	2024-10-27 18:40:21 +00:00
ThePhaseless	aabff0a65f	do not skip challenged	2024-10-27 18:32:06 +00:00
ThePhaseless	58f230dce3	first stop, then throw exception	2024-10-27 19:13:15 +01:00
ThePhaseless	0535c5d9bd	add logger even if passing	2024-10-21 13:46:26 +00:00
ThePhaseless	d26ddf3bcf	add healthcheck	2024-10-21 13:34:07 +00:00
ThePhaseless	361e11cda2	skip if test if client cant reach	2024-10-21 13:19:31 +00:00
ThePhaseless	e33d7ab77b	fix addon passing all websites	2024-10-21 13:12:09 +00:00
ThePhaseless	4e3876e0b7	skip test if rate limited	2024-10-19 21:47:16 +00:00
ThePhaseless	f4dcaf453e	dont use async tests	2024-10-19 20:55:03 +00:00
ThePhaseless	95b5b1375f	path fixes	2024-10-19 20:49:50 +00:00
ThePhaseless	b3d7060431	async tests	2024-10-19 20:48:32 +00:00
ThePhaseless	2dfc5b2201	refactor and test in dockerfile	2024-10-19 20:35:11 +00:00
ThePhaseless	55a557468e	add display to env	2024-10-18 16:52:19 +00:00
ThePhaseless	2da2d08718	fix run sh	2024-10-18 16:47:31 +00:00
ThePhaseless	a12594b11a	move to entrypoint	2024-10-18 16:43:41 +00:00
ThePhaseless	8c249fbbbd	Merge pull request #6 from ThePhaseless/chromium Chromium	2024-10-18 18:35:05 +02:00
ThePhaseless	8b0caf6adc	dont test (fck it)	2024-10-18 16:33:27 +00:00
ThePhaseless	dbc91bc982	reduce max time to 30 sec	2024-10-18 16:03:17 +00:00
ThePhaseless	e0a2a2a035	update packages and new build method	2024-10-18 15:59:52 +00:00
ThePhaseless	5003544d5b	handle rate limiting	2024-10-18 15:53:36 +00:00
ThePhaseless	a2fd8a056b	use only new click method	2024-10-18 15:53:36 +00:00
ThePhaseless	4bc53e5311	add sysadmin for devcontainer	2024-10-18 15:53:36 +00:00
ThePhaseless	23a5d53e9a	do not test on arm	2024-10-18 15:53:36 +00:00
ThePhaseless	b924d27d26	typo fix	2024-10-18 15:53:36 +00:00
ThePhaseless	ca80bd0285	logic refactor	2024-10-18 15:53:36 +00:00
ThePhaseless	464a618f29	print current html on error	2024-10-18 15:53:36 +00:00
ThePhaseless	093d318dbc	add default display	2024-10-18 15:53:36 +00:00
ThePhaseless	d452d43ee8	do not override previous	2024-10-18 15:53:36 +00:00
ThePhaseless	b7f9c1467c	upload screenshot if action failed	2024-10-18 15:53:36 +00:00
ThePhaseless	2e819c9adf	skip if rate limited	2024-10-18 15:53:36 +00:00
ThePhaseless	d77dc06b35	add exception handling	2024-10-18 15:53:36 +00:00
ThePhaseless	29a5432684	increase timeout in tests	2024-10-18 15:53:36 +00:00
ThePhaseless	b204acb826	update lock file	2024-10-18 15:53:36 +00:00
ThePhaseless	8a90428f4b	update troubleshooting	2024-10-18 15:53:36 +00:00
ThePhaseless	5424ea0ab7	remove pytest from entrypoint	2024-10-18 15:53:36 +00:00
ThePhaseless	718e6da2b6	fix devcontainer	2024-10-18 15:53:36 +00:00
ThePhaseless	60bf8332d0	remake dockerfile	2024-10-18 15:53:36 +00:00
ThePhaseless	d2f7f3448d	auto python version	2024-10-18 15:53:36 +00:00
ThePhaseless	7d530daf88	Merge pull request #8 from ThePhaseless/dependabot/github_actions/dot-github/workflows/docker/setup-buildx-action-3.7.1 Bump docker/setup-buildx-action from 3.0.0 to 3.7.1 in /.github/workflows	2024-10-18 17:51:30 +02:00
ThePhaseless	7dc16dfe7c	Merge pull request #9 from ThePhaseless/dependabot/github_actions/dot-github/workflows/sigstore/cosign-installer-3.7.0 Bump sigstore/cosign-installer from 3.5.0 to 3.7.0 in /.github/workflows	2024-10-18 17:51:26 +02:00
ThePhaseless	87db1a3955	Merge pull request #10 from ThePhaseless/dependabot/github_actions/dot-github/workflows/docker/login-action-3.3.0 Bump docker/login-action from 3.0.0 to 3.3.0 in /.github/workflows	2024-10-18 17:51:20 +02:00
ThePhaseless	bf0648e49b	Merge pull request #11 from ThePhaseless/dependabot/github_actions/dot-github/workflows/docker/metadata-action-5.5.1 Bump docker/metadata-action from 5.0.0 to 5.5.1 in /.github/workflows	2024-10-18 17:51:15 +02:00
ThePhaseless	70b75f4db4	Merge pull request #7 from ThePhaseless/dependabot/github_actions/dot-github/workflows/docker/build-push-action-6.9.0 Bump docker/build-push-action from 5.0.0 to 6.9.0 in /.github/workflows	2024-10-18 17:51:06 +02:00
dependabot[bot]	2ab91102b0	Bump docker/metadata-action from 5.0.0 to 5.5.1 in /.github/workflows Bumps [docker/metadata-action](https://github.com/docker/metadata-action) from 5.0.0 to 5.5.1. - [Release notes](https://github.com/docker/metadata-action/releases) - [Commits](https://github.com/docker/metadata-action/compare/96383f45573cb7f253c731d3b3ab81c87ef81934...8e5442c4ef9f78752691e2d8f8d19755c6f78e81) --- updated-dependencies: - dependency-name: docker/metadata-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2024-10-18 15:50:46 +00:00
dependabot[bot]	5c87b29599	Bump docker/login-action from 3.0.0 to 3.3.0 in /.github/workflows Bumps [docker/login-action](https://github.com/docker/login-action) from 3.0.0 to 3.3.0. - [Release notes](https://github.com/docker/login-action/releases) - [Commits](https://github.com/docker/login-action/compare/343f7c4344506bcbf9b4de18042ae17996df046d...9780b0c442fbb1117ed29e0efdff1e18412f7567) --- updated-dependencies: - dependency-name: docker/login-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2024-10-18 15:50:44 +00:00
dependabot[bot]	76a93f44a1	Bump sigstore/cosign-installer from 3.5.0 to 3.7.0 in /.github/workflows Bumps [sigstore/cosign-installer](https://github.com/sigstore/cosign-installer) from 3.5.0 to 3.7.0. - [Release notes](https://github.com/sigstore/cosign-installer/releases) - [Commits](https://github.com/sigstore/cosign-installer/compare/59acb6260d9c0ba8f4a2f9d9b48431a222b68e20...dc72c7d5c4d10cd6bcb8cf6e3fd625a9e5e537da) --- updated-dependencies: - dependency-name: sigstore/cosign-installer dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2024-10-18 15:50:41 +00:00
dependabot[bot]	9dff932766	Bump docker/setup-buildx-action in /.github/workflows Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 3.0.0 to 3.7.1. - [Release notes](https://github.com/docker/setup-buildx-action/releases) - [Commits](https://github.com/docker/setup-buildx-action/compare/f95db51fddba0c2d1ec667646a06c2ce06100226...c47758b77c9736f4b2ef4073d4d51994fabfe349) --- updated-dependencies: - dependency-name: docker/setup-buildx-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>	2024-10-18 15:50:39 +00:00
dependabot[bot]	749fab3ff1	Bump docker/build-push-action from 5.0.0 to 6.9.0 in /.github/workflows Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 5.0.0 to 6.9.0. - [Release notes](https://github.com/docker/build-push-action/releases) - [Commits](https://github.com/docker/build-push-action/compare/0565240e2d4ab88bba5387d719585280857ece09...4f58ea79222b3b9dc2c8bbdd6debcef730109a75) --- updated-dependencies: - dependency-name: docker/build-push-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com>	2024-10-18 15:50:37 +00:00
ThePhaseless	77290081b7	update actions	2024-10-18 15:49:50 +00:00
ThePhaseless	843fe88e5a	build arm64	2024-10-18 13:17:19 +02:00
ThePhaseless	0c2206911d	grammar	2024-10-01 11:22:12 +02:00
ThePhaseless	cbce34366b	update ports	2024-10-01 11:07:13 +02:00
ThePhaseless	29a31ab757	Add troubeshooting steps	2024-10-01 11:03:07 +02:00
ThePhaseless	ee9e8ca98f	disable invalid websites	2024-09-13 19:22:37 +00:00
ThePhaseless	e25415012a	quick check	2024-09-13 19:13:37 +00:00
ThePhaseless	b518904196	change the discovery of shadow dom	2024-09-13 19:07:43 +00:00
ThePhaseless	a633a91dcf	tweaks	2024-09-13 19:00:20 +00:00
ThePhaseless	22fba55373	adjustments	2024-09-13 18:48:31 +00:00
ThePhaseless	6e825e15a4	use python 3.12	2024-09-13 18:40:34 +00:00
ThePhaseless	ac4eadea9d	test in dockerfile	2024-09-13 18:30:48 +00:00
ThePhaseless	0d79b22ceb	build if tests pass	2024-09-13 18:30:14 +00:00
ThePhaseless	d8d92ec3de	use fastapi to test	2024-09-13 18:28:36 +00:00
ThePhaseless	79fb20082f	add timed tests	2024-09-13 18:04:37 +00:00
ThePhaseless	2844f51fb1	fix new issue	2024-09-13 18:04:22 +00:00
ThePhaseless	092b9fb492	add test deps	2024-09-13 18:04:13 +00:00
ThePhaseless	b1a67da658	update packages	2024-09-13 18:04:01 +00:00
ThePhaseless	40b790ceee	fix deprecation	2024-09-13 18:03:38 +00:00
ThePhaseless	312ea474d9	switch to python 3.12	2024-09-13 18:03:09 +00:00
ThePhaseless	98719476c4	use shadow roots and fix HTTP request failed: [500:InternalServerError] #2	2024-08-25 15:24:27 +00:00
ThePhaseless	e05c34aa8a	format	2024-08-25 15:11:03 +00:00
ThePhaseless	76502ee508	add docker labels	2024-07-25 21:07:10 +00:00
ThePhaseless	fb905a251a	add github extention parsing and use clean approach	2024-07-25 21:01:22 +00:00
ThePhaseless	ed71354e19	refactor + docstrings	2024-07-25 21:00:31 +00:00
ThePhaseless	8c8b7e3324	add gracefull errors	2024-07-25 21:00:11 +00:00
ThePhaseless	d9c26877ec	[skip ci] Update README.md	2024-07-25 14:46:36 +02:00
ThePhaseless	d377d63400	ensure caps for loglevel	2024-07-25 01:17:40 +00:00
ThePhaseless	7c61d37ea8	[skip ci] Added info about versioning	2024-07-25 01:04:59 +00:00
ThePhaseless	3fa2b49b6d	[skip ci] Updated header	2024-07-25 01:03:12 +00:00
ThePhaseless	1d9740cdd8	[skip ci] Add more info	2024-07-25 01:02:04 +00:00
ThePhaseless	d5a1680b4e	[skip ci] remove screenshots volume	2024-07-25 01:01:49 +00:00
ThePhaseless	58200970de	[skip ci] Create readme	2024-07-25 00:52:06 +00:00
ThePhaseless	8311b7b148	remove screenshots, improve logging and add timeout for button	2024-07-25 00:39:29 +00:00
ThePhaseless	86fd1e2c5f	bring tab to front	2024-07-25 00:39:06 +00:00
ThePhaseless	bccd8c8401	add browser crash gitignore	2024-07-25 00:38:55 +00:00
ThePhaseless	51f01e2f97	Create docker-publish.yml	2024-07-25 02:08:26 +02:00
ThePhaseless	7a47e446a0	packages cleanup	2024-07-25 00:07:23 +00:00
ThePhaseless	9808c42a8a	use venv in proj	2024-07-25 00:07:18 +00:00
ThePhaseless	f4c13957bf	remove novnc	2024-07-25 00:07:08 +00:00
ThePhaseless	25d708de01	use const for logging level	2024-07-25 00:06:56 +00:00
ThePhaseless	6e45f4c316	adjust file path checking	2024-07-25 00:04:22 +00:00
ThePhaseless	4f225438a7	final touches	2024-07-25 00:04:00 +00:00
ThePhaseless	eaf83e62ff	uncomment dockerfile	2024-07-24 23:09:03 +00:00
ThePhaseless	336d20a3a5	added virtual desktop	2024-07-24 23:00:51 +00:00
ThePhaseless	6c124dcfd0	expose novnc	2024-07-24 23:00:15 +00:00
ThePhaseless	2ad7ee262e	fix arg	2024-07-24 23:00:07 +00:00
ThePhaseless	75bac7e203	swtich to dummy test	2024-07-24 20:42:23 +00:00
ThePhaseless	8501e28f85	fix downloading	2024-07-24 20:42:06 +00:00
ThePhaseless	3682ccc0fa	changed to path type	2024-07-24 20:41:57 +00:00
ThePhaseless	b0c8d5d387	fix logger	2024-07-24 20:41:15 +00:00
ThePhaseless	8c428276d6	add debug for debugging	2024-07-24 20:41:01 +00:00
ThePhaseless	003e7d0139	expose port for solverr	2024-07-24 20:39:30 +00:00
ThePhaseless	2d1b2964af	get lib path from env	2024-07-24 20:39:10 +00:00
ThePhaseless	427c758de6	added screenshots and debug env	2024-07-24 20:38:23 +00:00
ThePhaseless	031235dba1	change project name	2024-07-24 20:37:39 +00:00
ThePhaseless	2a3a76b6ef	fix chromium download on devcontainer	2024-07-24 17:51:35 +00:00
ThePhaseless	104ef5968a	use default folder	2024-07-24 17:51:26 +00:00
ThePhaseless	2341ad5887	docker and example usage	2024-07-24 17:51:01 +00:00
ThePhaseless	a5c2355f21	ensure venv in project	2024-07-24 17:50:47 +00:00
ThePhaseless	d3617797e6	added script that fixes nodriver	2024-07-24 17:15:13 +00:00
ThePhaseless	e449a183ae	allow more types in cookies	2024-07-24 15:53:14 +00:00
ThePhaseless	335e9e486f	move to dockerfile instead of compose	2024-07-24 15:53:02 +00:00
ThePhaseless	70cb18ae81	ignore explicit return type	2024-07-24 15:52:41 +00:00
ThePhaseless	d8fb8feaeb	create base dockerfile	2024-07-24 15:52:30 +00:00
ThePhaseless	4831e1247b	Add override initial url	2024-07-24 15:41:41 +00:00
ThePhaseless	87ee96ef5c	use preferred method for cookies (stuck)	2024-07-24 15:41:37 +00:00
ThePhaseless	2a50a019e1	fix string path	2024-07-24 15:41:20 +00:00
ThePhaseless	0ddf1e03c0	added default logger	2024-07-24 15:16:46 +00:00
ThePhaseless	b6c51470ff	remove extentions from repo	2024-07-24 13:59:07 +00:00
ThePhaseless	640a4bd8d8	first commit	2024-07-24 13:57:40 +00:00
				`@@ -1 +0,0 @@`
				<svg xmlns="http://www.w3.org/2000/svg" xml:space="preserve" viewBox="0 0 512 512"><path d="M243.9 511.9c-58.1-3.2-110.4-24-155-61.8-7-5.9-21.2-20.1-27.2-27.2-20-23.7-35.2-49.2-45.4-76.5-8.3-22-13-42.6-15.5-67.3-1.1-10.8-1.1-35.7 0-46.5 5.6-54.9 25.6-101.9 61-143.8 5.9-7 20.1-21.2 27.2-27.2 23.7-20 49.2-35.2 76.5-45.4 22-8.3 42.7-13 67.3-15.5 10.8-1.1 35.7-1.1 46.5 0 29.1 3 55.1 9.7 80 20.7 39.2 17.3 72.8 43.6 99.6 78 5.3 6.7 14.8 21 19.4 29.1 15.8 27.6 26.4 58.3 31.1 89.8 2 13.6 2.5 21.5 2.5 37.5s-.5 23.9-2.5 37.5c-7.1 47.8-27.1 91.6-59.2 129.5-5.9 7-20.1 21.2-27.2 27.2-16.4 13.8-34.2 25.8-51.8 34.6-28.8 14.5-59.1 23.1-91.7 26.3-7.4.8-28.9 1.3-35.6 1" style="fill:#fff"/><path d="M246.5 395.1c-1.7-.2-3.9-.3-5-.2-1 .1-3.5 0-5.5-.2-2-.3-6.1-.8-9.3-1.2s-6.7-.9-7.8-1.2c-1.2-.3-7.7-3.2-14.5-6.6s-14.3-7-16.8-8.1c-8.5-3.7-14.5-8.1-18.1-13.4-2.1-3.1-3.7-4.4-8.2-6.7-4-2-6-4.1-10.9-11-2-2.9-5-6.8-6.6-8.7-10.9-12.9-11.1-13.3-12.4-19.5-.5-2.5-1.6-5.4-2.9-7.8-4-7.4-5.4-10.8-6.4-14.9-.5-2.3-1.7-6.6-2.6-9.6-1.5-5.1-1.7-6.1-2.1-15.8-.4-9.4-.4-10.9.5-16.1.5-3.2 1.1-7.4 1.2-9.4.2-2 .6-5.4 1-7.6s.9-6.5 1.2-9.5c1-9.8 2.6-14.1 9.1-23.8 4.2-6.2 5.2-8.5 6-13.5.6-3.9 1.4-5.7 4.1-8.9 1.2-1.5 3.5-5.4 5.1-8.6 3.1-6.4 3.2-6.5 8.2-9.9 1.9-1.3 5.8-4 8.6-6s6.3-4.4 7.6-5.4c1.7-1.2 3.1-2.7 4.3-4.6 4.1-6.6 6.1-8 16.3-11.7 3.1-1.1 7.5-3.1 9.8-4.5 5.3-3.1 9-4.4 15-5 2.8-.3 6.8-1.2 9.8-2.1 4.5-1.4 5.6-1.6 10.4-1.6 5.7 0 6.4-.2 13.2-3.1 4.8-2.1 8.9-2.5 14.8-1.5 2.7.5 7.2 1.1 10.1 1.5 6.2.8 6.1.8 11.2 3.1 3.4 1.5 4.9 1.9 9.3 2.3 7 .7 7.9 1 16.1 5.1 3.9 2 9.5 4.5 12.4 5.7 9.8 3.9 14.3 7.2 22.1 15.7 3.3 3.6 8.6 9.2 11.9 12.5 14.5 14.5 14.9 15 16.5 19.4.8 2.2 2.6 6 3.9 8.3 5.2 9.2 12.2 23.8 13.4 28 .7 2.3 1.9 6.5 2.7 9.3 2.1 6.9 2.4 14.2 1 23.6-1.2 8-1.2 11.9-.3 18 .6 3.6.6 5.5.3 9.4-.7 6.7-1.6 10-4.1 14.1-1.3 2.2-2.4 4.7-2.9 6.6-1.8 7.8-5.6 16.3-10.7 24.3-1.4 2.2-3.4 5.5-4.3 7.4-2.2 4.3-4.2 6.6-8.2 9.6-3.7 2.7-14.5 14-17.7 18.4-2.2 3.1-7.1 7.4-10.6 9.4-1.1.6-4.3 1.8-7.2 2.6s-7.1 2.5-9.5 3.7c-3.6 1.8-5 3-8.6 6.6-2.3 2.4-4.9 4.7-5.7 5.1-1.6.8-5.5 1.5-10.7 2-1.7.2-4.6.8-6.4 1.5-7 2.6-7.3 2.6-16.1 2.7-6.9.1-9.3.3-12.3 1.2-4.9.9-8.8 1.2-12.7.6" style="fill:#cc7a3d"/><path d="M237.7 473.6c-42-3.8-79.9-18.3-113-43.2C56 378.7 24.1 291.7 43.1 207.6c6.6-29.2 19.8-57.8 37.7-81.9 47.7-64.1 126.8-97.1 205.8-85.9 36 5.1 70.5 19.3 99.7 41C455.7 132.5 488 220 468.9 304.4c-11.4 50.4-40.9 95.7-82.6 126.8-29.1 21.7-63.7 35.9-99.7 41-15.1 2.2-34.5 2.7-48.9 1.4m33.7-5.2c29-2.5 54.4-9.5 79-21.8 41.4-20.6 75.5-54.8 96.1-96.1 16.9-34 24.9-74.2 21.8-109.9-3.7-42.4-17.6-79.2-42.3-112-34.4-45.8-84.7-75.5-141.4-83.5-25.2-3.6-49.5-2.5-75.2 3.3-49.6 11.2-93.7 40-124.4 81.2-21.3 28.7-35 62-40.1 97.8-2.8 19.4-2.8 38 0 57.4 8.1 56.7 37.7 107 83.5 141.4 11.1 8.3 21 14.5 33 20.5 34.1 16.9 74.4 24.8 110 21.7" style="fill:#b1b1b1"/><path d="M253.9 367.3c-2.9-.7-4.3-1.4-6-2.9-2.9-2.6-3.9-4.9-3.9-8.9 0-3.9 1-6.3 3.9-8.9 6-5.4 15.8-3.1 19 4.3 1.1 2.6 1 7-.3 9.6-1.2 2.4-3.7 4.9-6 5.8-1.7.8-5.3 1.3-6.7 1m68.4-29.3c-9.2-3.4-11-15.4-3.1-21.1 8.1-5.9 20 1 18.8 11-.5 4-3 7.6-6.7 9.5-2.4 1.2-6.6 1.5-9 .6m-139.8-.2c-3.4-1.1-6.2-3.5-7.9-6.7-1.3-2.4-1.2-7.7.2-10.2 1.2-2.3 3.9-4.8 6.3-5.8 2.6-1.1 7-1 9.6.3 4.2 2.1 6.7 6 6.7 10.7 0 6.5-4.7 11.5-11 11.9-1.5.1-3.3 0-3.9-.2m43.2-22.8c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m54.6 0c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m-27.6-47c-2.2-.7-4-1.9-5.5-3.5-2.5-2.7-3.2-4.5-3.2-8.5 0-3.9.7-5.8 3.2-8.5s4.8-3.6 8.8-3.6 6.3.9 8.8 3.6 3.2 4.5 3.2 8.5c0 2.5-.3 4-.9 5.2-1.2 2.3-3.5 4.7-5.7 5.8-1.9 1.1-6.7 1.6-8.7 1m99.7 0c-2.4-.8-4.1-1.9-5.8-3.8-5.4-6-3.1-15.8 4.3-19 2.6-1.1 7-1 9.6.3 2.5 1.2 4.9 3.7 5.9 6.2.9 2.1 1 6.3.1 8.8-.8 2.3-3.5 5.3-5.9 6.6-1.9 1-6.3 1.5-8.2.9m-198.9-.7c-8.9-2.5-11.8-13.8-5.1-20.1 2.6-2.5 4.5-3.2 8.2-3.2 3.9 0 6.3 1 8.9 3.9 2.1 2.3 3 4.7 2.9 8.2 0 7.6-7.5 13.2-14.9 11.2m42.9-.4c-2.3-1.2-5.2-4.1-6.1-6.4-1-2.4-.9-7.1.3-9.5 1.1-2.3 4.1-5.2 6.4-6.2 2.4-1 7.1-.9 9.5.3 2.3 1.1 5.2 4.1 6.2 6.4 1 2.4.9 7.1-.3 9.5-1.1 2.3-4.1 5.2-6.4 6.2-2.5 1.1-7.2.9-9.6-.3m109-.3c-11.1-5.6-7-22.5 5.5-22.4 3.7 0 6.1 1.1 8.6 3.9 2.2 2.4 3.2 4.9 3.2 8s-1 5.6-3.2 8c-2.5 2.8-5 3.9-8.6 3.9-2.3-.1-3.5-.4-5.5-1.4m-79.7-46.3c-8.9-2.5-11.8-13.8-5.1-20.1 2.6-2.5 4.5-3.2 8.2-3.2 3.9 0 6.3 1 8.9 3.9 2.1 2.3 3 4.7 2.9 8.2-.1 7.6-7.6 13.3-14.9 11.2m54.5 0c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.1-8.6 7.8-13.9 6.3m43.2-22.8c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.2-8.6 7.8-13.9 6.3m-140.6-.5c-8.7-2.4-11.6-13-5.4-19.7 2.5-2.6 4.8-3.6 8.6-3.6 3.9 0 6.3 1.1 8.8 3.8 2.2 2.5 3 4.7 3 8 .1 8-7.3 13.6-15 11.5m70.3-28.9c-8-2.2-11.3-12-6.4-18.5 5.7-7.5 16.1-6.4 20.5 2 1.3 2.4 1.2 7.7-.2 10.2-2.6 5.1-8.5 7.8-13.9 6.3" style="fill:#884717"/></svg>