Impl lookup for an interface `I` for a facet with facet type requiring
an interface `I` will now succeed, getting the witness from the facet.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Resolve instruction id depending on the context from which a function is
called.
Calling a function in a function context that does not have a definition
emitted before reaching lowering will cause a crash. This needs a change
in check/eval layer.
Now that BitAnd for types exists, we should get an error about type
conversion, not about BitAnd not existing. Add `type.and` to the Core
package in the test in order to improve the error message.
This test will likely be made to pass by #5060.
If the query facet type has more than one interface, we must find an
impl that provides that interface for the query type for each interface.
This just looks like a for loop over the interfaces and ensuring we
found one impl witness for every one.
However the impl matching must change since it can't look at the
constant value of the entire query facet type for comparison with the
impl, as that query facet type may be for multiple interfaces and we are
looking to match an impl of a single interface.
To do this we break the query facet type up into each interface and make
sure the interface ids match. Then ensure that the impl was able to
deduce any generic parameters using the specific of the single query
interface.
There are some TODOs left here:
1. If the facet type for the query or the impl constraint has
"other_requirements" then we can't verify that they match since they are
lost. We fall back to comparing the constant id of the query to the
impl's constraint (after deducing generics in the impl). This correctly
eliminates mismatches but eagerly eliminates impls that could match the
query interface as well when there's more than one interface in the
query.
2. We don't return a witness for every interface in the query facet
type. Since we can't demonstrate any use of the witness there yet, for
cases that can have more than one interface in the query facet type,
this doesn't break anything that was previously working. The return
value is currently treated as a bool for cases with multiple interfaces
in the facet type (as a test for "can this be converted") but the
converted-to facet value's witnesses are unused.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
Here are some test changes so the diffs that come from my upcoming
functionality changes are easier to see. Upcoming functionality
includes:
* Compound member access with non-instance associated constants will
change to comply with the design
https://docs.carbon-lang.dev/docs/design/expressions/member_access.html#impl-lookup-for-compound-member-access
in #5059 .
* Impl lookup will add support for finding impl witnesses in facets
#5060
I'm also making the toolchain/check/testdata/impl/compound.carbon test
into a no_prelude version, and adding a version that tests with
importing.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The name scope lookup and member name lookup both need to handle the
case where the base inst is a FacetAccessType. Then we move from the
FacetAccessType to the FacetType which is the type of the instruction
inside the FacetAccessType.
We do name lookup on FacetType already, so "unwrapping" the
FacetAccessType to the FacetType just makes use of that path. Similarly
we do member access on FacetType already, so we can reuse that codepath
with the FacetType found in the FacetAccessType.
`T as I` outside of a type position is a facet value, which does not
have the interface of its original type. But when used in a type
position, or converted explicitly back to `type`, it recovers its
original type.
See
https://docs.carbon-lang.dev/docs/design/generics/details.html#facet-types:
> The requirements determine which types may be implicitly converted to
> a given facet type. The result of this conversion is a facet. For
> example, Point_Inline from the “Inline impl” section implements
> Vector, so Point_Inline may be implicitly converted to Vector as
> considered as a type. The result is `Point_Inline as Vector`, which
> has the members of Vector instead of the members of Point_Inline. If
> the facet `Point_Inline as Vector` is used in a type position, it is
> implicitly converted back to type type, see. This recovers the
> original type for the facet, so `(Point_Inline as Vector) as type` is
> `Point_Inline` again.
ASTUnit is owned by `CompileSubcommand`, passed through `Unit` to be
populated in `ImportCppFiles()` and used via `SemIR::File`.
When generating the AST, pass `-x c++` args to compile C++ (temporary
until we pass args properly).
`Cpp` namespace is marked as a special namespace and has dedicated logic
in `LookupNameInExactScope()`.
The logic for importing declarations from C++ to Carbon is in
`import_cpp.cpp`, but we're likely to want to refactor this
signfiicantly over time as it grows (perhaps a dedicated directory?).
Part of #4666.
The resulting facet type has its complete facet type canonicalized by
sorting and deduplicating the `required_interfaces`.
Impl lookup now uses the complete facet type. It continues to diagnose
with a TODO if it sees a complete facet type with 0 or more than 1
interface in it. Impl lookup to convert from a type to a facet value
hits this diagnosis.
Member lookup by name works on a facet type with more than one interface
because the name knows which interface to look for from the name, and
AppendLookupScopesForConstant() looks through all interfaces on the
complete facet type already to get the correct scope for the name.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Doing so results in TODOs in the resulting semir, since we don't handle
combining the facet types together properly or doing lookup into them.
There's a test added demonstrating this, which will be made to work in
followups.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This tripped over a lowering crash when a member function with self was
declared-but-not-defined, so that's why some test cases were updated to
have (empty) function definitions.
I'll follow-up with/look into a fix for the
self-declared-but-not-defined cases separately.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
An imported generic has bindings which are of type ImportRefLoaded, and
if they come from another package, they have no entity name attached to
them.
Since a binding name is always a constant-time value, we can get the
constant value instruction for the imported instruction to get a
canonical non-imported instruction. And that one will have a local
`NameId`.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
If the `impl as` clause is on a generic interface, the parameters to the
generic may be constrained by _other_ interfaces. This then requires
another impl lookup, but it should be looking for a different impl since
it's for a different interface.
To avoid considering the same impl again, we discard it from
consideration if the interface itself does not match the interface being
queried.
Note that the query FacetType can have more than one interface in it
eventually, and a `context.TODO()` call is left to notify when we run
into this.
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Emit diagnostics for a function declared in a non-owning library, that
is not redeclared (or defined) in the owning library.
---------
Co-authored-by: jonmeow <jperkins@google.com>
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
Expands the CompleteTypeInfo to include information about abstract
classes and computes that information as part of completing the type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Currently the toolchain does not recognize that tuples and structs with
abstract elements should be considered abstract.
Also make the existing `fail_abstract` test into a `no_prelude` test.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
These tests expose cycles during deduction, when the generic parameters
in an impl statement require deduction and the impl clause that
satisfies them comes after the one containing the generic parameters.
This causes the same impl to be looked at repeatedly, and produces a
cycle diagnostic.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
* For class types, use `RequireCompleteType`
* For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
* Resolving for member access or actions that require impl lookup.
* Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
This adds support for choice types at a similar level to that of a C
enum, where each alternative has a name but no additional
data/parameters attached to it. We generate a TODO diagnostic if
parameters are specified.
Because there's no extra data, the storage is a simple unsigned integer
discriminant of the smallest possible size.
A choice without any alternatives is not constructible. A choice with a
single alternative is, and has an empty tuple in place of a discriminant
since it has only one state. The empty tuple is used to make the class
non-constructible. This can be improved.
Each alternative is turned into a let binding on the choice that is a
value of the choice with that alternative set as the active one in the
discriminant. This isn't possible to write in user code with a class
right now, since the let binding has the same type as the choice
(which is a class) it is within. It's possible to generate it in semir
however by adding the binding after the class is marked complete.
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
A value of type FacetAccessType can convert to a facet value of a target
FacetType if the value's underlying facet value's FacetType is
compatible.
A value of type FacetType can convert to another value of type FacetType
if the value's FacetType is compatible with the target FacetType.
During impl lookup, the comparison of the lookup type and the impl's
type needs to consider more than strict equality. If the impl's self
type is a FacetAccessType, we instead need to verify that the FacetType
of the lookup type and of the impl's self type are compatible (which is
like a problem of another impl lookup). For now we check that they are
equal by unwrapping the FacetAccessType to the constant facet value
within, and compare that with the lookup type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Cycles are defined as reaching two independent lookups in a chain that
have all the same types involved. The acyclic rule states that this is
not possible and results in an error:
https://docs.carbon-lang.dev/docs/design/generics/details.html#acyclic-rule
To do this we need to track the types involved in impl lookup. The
interface constant includes the whole facet type being looked up, which
includes any specific types for generics or where constraints. Thus we
just need to compare the constant ids to look for this condition.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Currently it returns false which just ends typechecking. Instead handle
the error state later and avoid firing overlapping diagnostics in
'extend impl as'.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Change parse tree from `template (T:! type)` to `(template T):! type`,
so that we have information about whether a binding is a template
binding available when forming the representation of the binding
pattern. This incidentally fixes a bug that we would accept `template
addr A:! B` instead of the intended `addr template A:! B`.
Track whether a symbolic binding is a template binding on the
`EntityName` object. I'm borrowing a bit from the `CompileTimeBindIndex`
for this in order to avoid making `EntityName`s larger. Longer-term, we
should think about using a different representation for symbolic
bindings, to avoid including these fields in all `EntityName`s, but
that's out of scope for this change.
So far, template bindings are treated as having the same phase as
checked bindings, but that will change in a future PR.
If 'extend impl' is invalid, mark the impl as invalid by putting an
ErrorInst in the witness_id field.
The construction of the witness_id can otherwise return an ErrorInst but
impl lookup was not checking for that. Now have impl lookup check for an
error there before attempting to deduce generic parameters, which avoids
infinite recursion through deduction in cases like a cyclical impl of
itself.
Adds a testcase for infinite impl-of-itself lookup found by fuzzer.