This change adds a `BindSymbolicName` instruction for generic bindings,
paralleling the existing `BindName`. A mechanism is also added to allow
both kinds of binding to be accessed uniformly, for convenience in the
case where the two different kinds of binding are treated the same.
Generic bindings of type `type` are allowed to be used as types,
although no operations are provided for such types. For now lowering
treats these types as empty structs, which seems like a reasonable
lowering for non-monomorphized unconstrained types.
This is a step towards adding enclosing scopes for imports. It creates
an indirection for all bind names.
We discussed specializing for bindings that are in function scope (i.e.,
not a useful enclosing scope for imports or diagnostics). However, the
thought is to go ahead with this singular approach for now, and only
change structure if it's a performance issues so that we have
incrementally fewer instructions to handle.
This builds out a little infrastructure for one name scope to `extend`
another. We'll need more refinement here to cover other cases, but this
should provide some foundation for that future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a `LazyImportRef` instruction. Versus `CrossRef`, this is intended
to represent an instruction which cannot be used directly, and must be
replaced when it comes up due to name lookup. The intent is to use this
to avoid recursive loading of imported IR instructions.
Note, under this model, when `ResolveIfLazyImportRef` is called, it
essentially needs to load both inst and type information to a sufficient
point where any further attempts would hit name lookup again. That will
probably be complex, and the current implementation is just touching the
surface of the issue. I was heading down this route because it would
mean we have a limited number of points that need to consider whether
they're going to talk about a `LazyImportRef`.
I'm considering whether `CrossRef` should be dropped in favor of more
specific `Builtin` special-casing, due to the divergence of desired
behaviors. This could mean dropping the `builtins` IR since it's not
looking useful right now.
Modify `NameScope` to track whether the scope is associated with a load
error. This is to handle cases where one or more imports failed, so we
do not want to issue warnings for related scopes.
The 0-size on `ValueStore` comes up due to the changes to `NameScope`,
which make it too large for the default handling. After discussion with
zygoloid, the thought was we might want to try reserving a roughly
correct value based on parse node counts, but the stack default wasn't
buying much.
Fixes a bug where the implicit import used the package name instead of
the invalid identifier.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This gets to a lifetime subtlety, particularly with things like the
sorting diagnostic consumer that delay output. In order to reduce the
chance of accidental references, disallow StringRef in the diagnostics.
For example:
```
./toolchain/diagnostics/diagnostic_emitter.h:162:5: error: static_assert failed due to requirement '!std::is_same_v<llvm::StringRef, llvm::StringRef>' "Use std::string or llvm::StringLiteral for diagnostic lifetimes."
static_assert(
^
toolchain/check/convert.cpp:477:11: note: in instantiation of member function 'Carbon::Internal::DiagnosticBase<std::string, std::string, llvm::StringRef>::DiagnosticBase' requested here
CARBON_DIAGNOSTIC(StructInitMissingFieldInConversion, Error,
^
./toolchain/diagnostics/diagnostic_emitter.h:47:7: note: expanded from macro 'CARBON_DIAGNOSTIC'
::Carbon::Internal::DiagnosticBase<__VA_ARGS__>( \
^
```
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This adds instructions so that we get printing. I may adjust the
instruction format a little further to add a type, but I think the basic
setup will remain.
Note this builds on #3414
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Another issue found while trying to make `package` work, lurking in
fuzzer inputs. This leaves TODOs because we probably do want to support
this, it's just non-trivial to fix.
This turns out to somewhat block `package` support because there's a
fuzzer test-case that does similar. The parse is valid so we should
probably handle it reasonably.
I suspect the `let` test case might work with a little effort, given it
shouldn't really require much evaluation. On the other hand, `var`
definitely shouldn't, and `fn` will probably require something like
`constexpr` plus more substantial compile-time evaluation support.
When declaring a name such as `fn Ns.Class.F() { ... }`, enter the
scopes of `Ns` and `Ns.Class` as we form the name, and remain in those
non-lexical scopes until the end of the declaration.
When performing an unqualified lookup, look in any enclosing non-lexical
scopes in addition to looking into the lexical name table.
We now track a scope index with each lookup result in the lexical name
lookup table. This is used to determine whether a lexical or non-lexcial
result is the innermost result and whether a declared name is in the
same scope as some previous introduction of that name or in a nested
scope. For now, this could just be the index into the scope_stack, but
the intent is to also use this to detect names being declared after they
are first looked up, which requires the indexes to outlive their scopes,
so we use a persistent numbering of all scopes instead. The persistent
numbering also permits more invariant checking.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
If the initializing representation is the same as the value
representation, don't materialize a temporary and perform a value
binding. Instead, directly extract the value, using a new
`value_of_initializer` node.
This removes a lot of redundant `alloca`s from our generated LLVM IR.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for member access into classes, for both non-instance
members and for fields.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the fields in a class, and generate a corresponding struct type as
the object representation for the class. For now, we always use a
pointer as the value representation for a class.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Retain the `ClassDeclaration` node to represent a syntactic declaration
of a class (including possibly a declaration of a generic class), but
use a separate SemIR node to represent the class type itself. This
allows us to give the two separate treatment.
The `ClassDeclaration` is still entered into the name lookup table for
its enclosing scope, but when it is named in an expression, the class
type is produced instead. When the class declaration is named in a
declaration name, it can be used to define members of the class, but an
expression that resolves to the class type cannot be used to define
members of the class.
In order to distinguish these cases, use `Name` rather than
`NameExpression` for the left-hand side of a `QualifiedName` parse node.
This removes the only use of the `Expression` form of a declaration
name, so that is also removed.
In the future, `ClassType` will also be used to describe types such as
`Vector(T)`, for which there is no corresponding `ClassDeclaration`.
This is a prerequisite for class support, where a class can be
referenced as a type before it becomes complete. For example, given:
```carbon
class A {
fn F(a: A);
class B {}
var b: B;
}
fn A.F(a: A) {}
```
we need to lower `B` before we lower `A`, even though `A` is used as a
type first.
This will also start catching some cases where we don't require a type
to be complete despite using it, as we now only lower types that are
required to be complete.
Remove the poison values for struct and tuple literals. We don't need
those any more, because we never generate references to those literals
as values, and we don't have a type to use for them because we never
require the type of a literal to be complete, only the type of the
entity initialized by the literal, which can be different, for example
when initializing an array from a tuple literal or a class from a struct
literal.
This doesn't affect the output: `llvm::Type` objects that are not
referenced by an LLVM module don't affect the IR for that module, and
the order in which `llvm::Type`s are created doesn't affect anything
either.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This updates lexing to use the data. I'll do checking separately, just
to split changes.
Note the ValueStore structure is also set up such that SemIR::File can
use it for other fields.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Richard Smith
Jon Ross-Perkins
josh11b
