As discussed around #3792, identify the import a diagnostic message came
from prior to the diagnostic message itself. This occurs during location
translation so that the logic can be central.
I'd considered associating the parse node with ImportRef instructions,
but I realized about halfway through that because I need to store the
ImportDirectiveId on the ImportIR for cross-package imports, it's there
for use in location translation without extra work. That saves a fair
amount of stringing it through declarations, as well as an oddity where
ImportRef instructions would have a node that didn't really represent
them.
Fix a collection of issues that were preventing lowering for overloaded
operators from working.
Instead of creating `import_ref` instructions during name lookup in the
current block, whatever that might be, we now create them in the `file`
block always. This avoids inserting them into blocks that might not be
intended to contain them, such as functions, and avoids the IR generated
for a function depending on which names we happen to have looked up
first.
When importing a class, function, or interface, import its enclosing
scope ID. This is necessary to allow us to distinguish between functions
at interface scope, which shouldn't be lowered, and other functions, and
will also be used in future to provide qualified names for declarations
when printing types. In order to support this:
- Track the constant values of namespaces created during importing so
that we can find them when resolving an import ref. Use those constant
values to convert an enclosing scope ID from the imported IR into a
corresponding ID in the current IR.
- Change how we do two-pass import of classes and namespaces so that we
can do two-pass import even for non-defining declarations, so that we
can import the enclosing scope.
While working on the final point above, I reworked `TryResolveInst` to
return a flag indicating whether another pass is necessary instead of
implicitly encoding this in the `ConstantId`. This permits the handling
of classes to be simplified; now `import_ir_constant_values` is only
accessed in a single place.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Note, I'm annotating the lookup partly so that the reason the conflict
comes up is clear, partly so that there's actually a diagnostic line
associated with the root cause as more tests get packed into a single
file.
I'd added these trying to catch cases where ImportRefUnused might be
returned, but I believe these are incorrect. Mistakes should still be
caught because an ImportRefUnused will lead to errors in other handling.
Removing the TryResolveImportRefUnused should clarify the semantics of
when an ImportRefUnused is expected.
This revamps the support for cross-package imports, making them look
more like a namespace. The planned model is mentioned on
[#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1217586076022210670).
This does not implement name lookup into the new namespace structure.
A few key changes in this PR (it's a little sprawling) are:
- Moves logic for adding package imports from context.* to import.*
- Remove SemIR::Import, which was the prior model. This is instead now a
SemIR::Namespace with the NameScope getting a new import_ir_scopes
field.
- Allow SemIR::Namespace to use Parse::ImportDirectiveId in addition to
the prior Parse::NamespaceId
- The import_ir_scopes field includes a NameScopeId so that as we
traverse to child namespaces, we can directly perform name lookup in the
other IR.
- is_closed_import now tracks whether a namespace comes from a different
package. This has a diagnostic implemented in decl_name_stack.
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Add an instruction to hold the witness table, along with a corresponding
type to keep things simpler. Add `check/impl.{h,cpp}` to house the new
logic. No checking of impls against interfaces is performed yet.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
#3740 added another similar call. This may be temporary, maybe we'll
stop using and remove later, but it's a small simplification right now
and we might also retain a similar inst -> constant -> type flow.
`Self` is modeled as a `bind_symbolic_name` with no corresponding value,
for now at least. In the future it might make sense to model it as a new
kind of instruction, or as a `bind_symbolic_name` whose value is a
`param`, but for now we just want it to introduce a symbolic constant.
In order to convert a value like the `Self` of an interface to a type, a
new instruction `facet_type_access` is introduced. This notionally
accesses the "type" field within a facet, converting it from a pair of
(type, witness) into just the type.
When declaring an associated entity in an interface -- just associated
functions for now -- create an associated entity value and corresponding
type to represent a "slot in a witness table". Also track the list of
associated entities on the interface so that we will eventually be able
to check impls against them.
Associated entities are represented as the integer index of their slot
in a witness table.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
In `Class` we have:
```
// The following members always have values, and do not change throughout the
// lifetime of the class.
// The following members are set at the `{` of the class definition.
// The following members are accumulated throughout the class definition.
// The following members are set at the `}` of the class definition.
```
`Interface` has similar, minus the "accumulated" members. I'm echoing
this, except `Function` has no `}` members; at present, nothing
differentiates between "started definition" and "completed definition",
unlike the other two.
Also removing a slightly inconsistent default value for decl_id.
I'm proposing a different split, along the line of "what does this
relate to". I view impl.h as having started down this route. Moving the
inst store stuff to inst.h feels odd to me given how much else is there
right now, but maybe it's still the best approach. Some files only
contain a store, no structured class, but I felt the consistency in file
naming (without _store suffixes) might help.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
- File::StringifyTypeExpr now has a case that hits the ImportRefUsed
TODO, so implementing that. I think the `static` approach will be
helpful in ensuring there aren't access bugs, particularly when future
support is added.
- `let` wasn't adding to exports because it doesn't use
`decl_name_stack` the way `var` does. This now adds to exports, but we
might want to unify logic for issues such as this.
- BuildImportRefUsedValueRepr is now called for another inst kind, and
it seemed like calling back to BuildValueRepr was the best way to
resolve this. I don't *think* that's going to cause recursion.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
This provides support for Const, Pointer, Struct, and Tuple types. It
does not cover Class, Function, or Interface which have their own Id and
are tracked slightly differently.
Collect the contents of an `impl` into a scope, and start doing very
basic checking for `impl` declarations and definitions.
This change adds two new `Id` types to the set of type that `NodeStack`
supports -- `ImplId` and `NameScopeId`.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now, ConstantValueStore defaults to having unknown values use
NotConstant. This generally works for the current IR, but with imports
we're expecting sparse entries which are generally unknown -- and
distinguishing between NotConstant and simply unset would be helpful. As
a consequence, add Invalid.
We discussed whether to simply have ConstantValueStore default to
Invalid going forward, or to make the default flexible. The upside to
the former is consistency, the upside to the latter is that it should
result in fewer Sets when operating on the current IR (which will more
frequently have known non-constant values). This PR offers both
approaches in separate commits, but I somewhat lean towards the latter
for fewer array resizes.
Note, a totally different approach would be to use a different class
(not ConstantValueStore) for imported IRs -- then the default of Invalid
versus NotConstant would be type-dependent. However, I expect we're
going to want to do at least somewhat consistent lookups, and using the
same ConstantValueStore for both cases allows avoiding a virtual
interface or templating. Also, I'm hoping to only maintain the
ConstantValueStore for an imported IR as part of Context (not File),
which would mean the SmallVector storage overhead is ephemeral,
mitigating one of the potential advantages of using a different type for
imported IRs.
Consume the components of the `impl` declaration, and set up scopes for
the child elements. We don't yet build a representation for the impl
itself.
Also, add an interface type value. This is necessary so that we have a
value for the expression on the right-hand side of `as` in an `impl`.
I'm basically just nudging down the path I think is right here. Adding a
small bit more support, but also more tests to capture cases that I
think will need to be verified as working.
With diagnostics like "Value of type `<function>` is not callable.",
that's because it expects a FunctionDecl but is instead finding a
ImportRefUsed. I'll need to work out the necessary support for a
callable function.
One more (hopefully last) rename on the Import instruction renaming.
I was kind of tempted to rename to just "IRId", since the IRs aren't all
imports. However, this felt easier to read, and a better choice than
CrossRef because it's more consistent with the other ways imports exist
in code. (even if IRs aren't all imports, most use-cases are derived
from imports)
Note though that import_irs may include IRs not just from direct
imports. Beyond the builtin IR, I'm thinking that for indirect imports,
or the prelude, we may end up adding them. e.g., so that constants can
be generated for indirect imports and still correspond to a directly
known IR, and for a given IR that's indirectly imported multiple times
to be deduplicated locally. I'm not there yet, I'm just mentioning this
to help give background for naming thoughts.
The categories `Expr`, `MemberName`, `Decl`, `Statement`, and `Modifier`
are usable since they are associated with a consistent `IdKind`. The
mapping to `IdKind` for NodeKinds that have those categories are no
longer listed explicitly, ensuring that the `NodeCategory` mapping is
the source of truth.
Also: fixes the category of the `FunctionDefinitionStart` and
`ArrayExprStart` node kinds.
Note: I've added [a section on defining constexpr constants to the
Toolchain architecture
doc](https://docs.google.com/document/d/1RRYMm42osyqhI2LyjrjockYCutQ5dOf8Abu50kTrkX0/edit?resourcekey=0-kHyqOESbOHmzZphUbtLrTw&tab=t.0#heading=h.f7682a2tpvxr).
FUTURE:
* We should switch `TuplePattern` to put an `InstId` on the `NodeStack`
instead of an `InstBlockId`, so we can handle the pattern category.
* We should make a category for names to replace uses of the `NameId`
`IdKind`.
* We should make use of these new APIs more, and propagate more-precise
types through the codebase.
QUESTION: Should I use a different approach for determining the number
of members of the `NodeKind` enum?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is a bit of a cleanup; I probably should've just renamed CrossRef
instead of adding ImportRefUsed.
Adding `is_builtin` to InstId is more about providing a standard API for
the check, which I expect to add a little more of.
Shifts import tests to validate that the BuildValueRepr CHECK isn't
accidentally hit.
Recent runs of `clang-tidy` for me started showing more errors, and this
is a collection of changes to address them.
First, I've systematically applied the disabling tag to all C++ rules
under //explorer/... with `buildozer` so we don't spend time analyzing
this code or reporting errors from it. Not sure this was strictly
necessary, but it seemed like a nice consistency improvement.
Next, I disabled a buggy check for missing `default` cases in
`switch`es. It seems to get confused by the fancy conversions in our
`enum_base.h`. We don't miss much with this as the Clang compiler
warnings for `switch` catch most of our actual bugs. I also removed the
local disabling of this now that it is turned off centrally.
Lastly, I added error checking to two file descriptor manipulating calls
in the `file_test` infrastructure.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Builds on #3656.
Under the prior "lazy" model, we had been planning to copy instructions.
Under the current "unused+used" model, we're restricting that to
constants. I'm trimming back some of the ResolveIfImportRefUnused logic
because it was more appropriate for the former model.
Right now, I'm adding ImportRefUsed direct creation in import.cpp for
namespaces. I think I'll need to do something similar in
RseolveIfImportRefUnused... I'm still trying to think about how to
manage type information there (which needs to come in as an import
reference itself, and probably have some amount of deduplication before
forming a TypeId). So ImportRefUnused lacks a type because I'm hesitant
to aggressively load it, whereas ImportRefUsed should *always* have a
type but it's just an error while I think things through.
For reference, ImportRefUnused and ImportRefUsed are mainly split in
order to track the boolean "used" without making fundamental
modifications to Inst for bit packing (this effectively instead packs a
bit into InstKind). AnyImportRef currently excludes the type because
it's mainly for diagnostic printing at the moment. It could end up with
a TypeId that would end up Invalid for ImportRefUnused, though it could
also be that the TypeId is only accessed when using ImportRefUsed
explicitly.
This makes some changes to the formatter so that ImportRefUnused and
ImportRefUsed will both be labeled as "import_ref" with an "unused ->
used" argument change in textual IR, but is otherwise not changing
logic.
To avoid bouncing through `constant_values()` to determine whether a
type is symbolic or template, store the `ConstantId` on the `TypeInfo`
not just the `InstId`.
In addition to propagating the symbolic / template phase, this also
propagates whether a type contains an error, resulting in our no longer
producing types such as `<error>*` -- these now evaluate to simply
`<error>`. While this makes our types less precise after an error, it
also removes some follow-on diagnostics, so it seems to be an
improvement on the whole.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
This makes duplicate and previous definition handling match. While we
may want to make both point more fine-grained at the name, the necessary
logic seems likely to be equivalent.
Note, I'm looking at this mainly due to duplicate names in imports,
where it's especially helpful to take an instruction instead of a parse
node. We'll eventually want to handle parse nodes from other imports
better, and I think this is the way it would most likely work.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
Instructions created by splices during conversion are now evaluated, as
are instructions created in cases where we first create a placeholder
instruction and later replace it by a different instruction.
This also removes the ability to set a parse node and instruction
independently after creating an `InstId`, which could lead to them
accidentally not matching.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
This is primarily being done for performance reasons, removing hash
lookups. The increased memory consumption is accepted.
Refactors LexicalLookup out to its own structure.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Jon Ross-Perkins
Richard SmithandJon Ross-Perkins
Gıyaseddin Tanrıkulu
josh11bandRichard Smith
Chandler CarruthandJon Ross-Perkins