Most of the calls to `StringifyType` already passed `true` for
`in_type_context`. Checking the rest, I found that every one of them was
already sufficiently clear that they were printing a type, or could be
made so with a very small change to the diagnostic text.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This gets to a lifetime subtlety, particularly with things like the
sorting diagnostic consumer that delay output. In order to reduce the
chance of accidental references, disallow StringRef in the diagnostics.
For example:
```
./toolchain/diagnostics/diagnostic_emitter.h:162:5: error: static_assert failed due to requirement '!std::is_same_v<llvm::StringRef, llvm::StringRef>' "Use std::string or llvm::StringLiteral for diagnostic lifetimes."
static_assert(
^
toolchain/check/convert.cpp:477:11: note: in instantiation of member function 'Carbon::Internal::DiagnosticBase<std::string, std::string, llvm::StringRef>::DiagnosticBase' requested here
CARBON_DIAGNOSTIC(StructInitMissingFieldInConversion, Error,
^
./toolchain/diagnostics/diagnostic_emitter.h:47:7: note: expanded from macro 'CARBON_DIAGNOSTIC'
::Carbon::Internal::DiagnosticBase<__VA_ARGS__>( \
^
```
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
When declaring a name such as `fn Ns.Class.F() { ... }`, enter the
scopes of `Ns` and `Ns.Class` as we form the name, and remain in those
non-lexical scopes until the end of the declaration.
When performing an unqualified lookup, look in any enclosing non-lexical
scopes in addition to looking into the lexical name table.
We now track a scope index with each lookup result in the lexical name
lookup table. This is used to determine whether a lexical or non-lexcial
result is the innermost result and whether a declared name is in the
same scope as some previous introduction of that name or in a nested
scope. For now, this could just be the index into the scope_stack, but
the intent is to also use this to detect names being declared after they
are first looked up, which requires the indexes to outlive their scopes,
so we use a persistent numbering of all scopes instead. The persistent
numbering also permits more invariant checking.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
Per the design, field access into a class value expression is a value
expression, even though we could produce an ephemeral reference
expression instead and avoid performing a value binding. This slightly
pessimizes class member access in some cases, but we should be able to
restore the old generated code by deferring actually performing the
value binding until a value expression is needed.
The value in the name lookup table is the class declaration. Map it to
the class type when it's found by lookup in an expression. This differs
from the behavior in a declaration name, where we want to find the class
declaration itself.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for member access into classes, for both non-instance
members and for fields.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the fields in a class, and generate a corresponding struct type as
the object representation for the class. For now, we always use a
pointer as the value representation for a class.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
Retain the `ClassDeclaration` node to represent a syntactic declaration
of a class (including possibly a declaration of a generic class), but
use a separate SemIR node to represent the class type itself. This
allows us to give the two separate treatment.
The `ClassDeclaration` is still entered into the name lookup table for
its enclosing scope, but when it is named in an expression, the class
type is produced instead. When the class declaration is named in a
declaration name, it can be used to define members of the class, but an
expression that resolves to the class type cannot be used to define
members of the class.
In order to distinguish these cases, use `Name` rather than
`NameExpression` for the left-hand side of a `QualifiedName` parse node.
This removes the only use of the `Expression` form of a declaration
name, so that is also removed.
In the future, `ClassType` will also be used to describe types such as
`Vector(T)`, for which there is no corresponding `ClassDeclaration`.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Split `node.h` into separate files for ID types (`id.h`) and for typed
nodes (`typed_nodes.h`). The per-node-kind data is now specified as part
of declaring the typed nodes, and is removed from the node kinds
x-macros, which now simply enumerate the node kinds.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
This updates lexing to use the data. I'll do checking separately, just
to split changes.
Note the ValueStore structure is also set up such that SemIR::File can
use it for other fields.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This includes being able to define a class that was previously
forward-declared, and being able to define a member function out-of-line
that was previously declared inside a class.
No support for fields or methods yet, and a class definition doesn't yet
cause the class to be treated as a complete type.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the callee expression in full, instead of only tracking the
callee's FunctionId. This results in the `name_reference` denoting the
function actually being used.
Lowering now propagates a `llvm::Function*` as the value associated with
expressions of type `<function>`.
We were not creating `NameReference` node for names produced by member
access into a namespace, such as the second name in
`Namespace.Function`, which caused lowering of calls to such names to
fail. This is now fixed, but the resulting `NameReference` node only
refers to the name and the lookup result, not to the `Namespace.`
qualifier. We'll need to decide how to fit a third operand into that
node (perhaps we can stop storing the `name_id`, since it can be derived
from the lookup result) but for now the qualifier is not tracked.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is shorter, more closely connected to code using the typed node
types, and avoids using the ambiguous word `Node` in places referring to
typed `SemIR` nodes.
Replace `SemIR::Node::GetAsFoo` and `SemIR::Node::Foo::Make` with
`SemIR::Foo` class that represents a particular kind of node, with named
fields.
Rename `SemIR::IntegerLiteral` and `SemIR::RealLiteral` to
`IntegerValue` / `RealValue` to better reflect their purpose and avoid a
name collision with the corresponding `SemIR` node kinds.
Remove `NodeKind::Invalid` and the `SemIR::Node` default constructor
entirely, as they were not used for anything.
Also add `name_reference_untyped` for references to non-first-class
names without types, which currently covers namespaces and functions.
This improves the fidelity of the SemIR representation, and fixes some
issues where we would use the wrong location for nodes and diagnostics
downstream of a name reference.
We're still missing a representation for dotted name expressions, such
as `Namespace.Function`, and we don't use the `untyped` node as an
operand of any other node yet.
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
josh11bandJon Ross-Perkins
Richard SmithandJon Ross-Perkins
