When converting from a facet value (an instruction whose type is
FacetType), we require making a FacetAccessType
to have a type instruction when building the resulting FacetValue.
Otherwise, the conversion is the same for values of type TypeType, and
we relax the convert function to support either.
Corrects the test expectations for converting `Goat as Animal`, a facet
value of type FacetType, into `Eats`, a facet type of type TypeType.
This would be a promotion in the typish hierarchy which is incorrect. We
had an extra case in Convert that was handling this, and it's now
removed. `Animal`, a facet type, does still correctly convert into
`Eats`, a facet type, if `impl Animal as Eats` exists.
When converting to a facet there are three different failure modes:
1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.
Closes#5027
Currently this test fails with trying to access a comptime function with
runtime values:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+7]]:3: error: non-constant call to compile-time-only function [NonConstantCallToCompTimeOnlyFunction]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR: core/prelude/operators/bitwise.carbon:96:3: note: compile-time-only function declared here [CompTimeOnlyFunctionHere]
// CHECK:STDERR: fn Op[self: Self](other: Self) -> Self = "type.and";
// CHECK:STDERR: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CHECK:STDERR:
a & b;
}
```
The issue is that the BitAnd impl for facet types is matching on any
value of any type:
```
impl forall [T:! type] T as BitAnd
```
What we really want is for it to match on facet types (which are type
values), which is written as:
```
impl type as BitAnd
```
After this change, the error makes more sense in the above test:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+4]]:3: error: cannot access member of interface `Core.BitAnd` in type `J` that does not implement that interface [MissingImplInMemberAccess]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR:
a & b;
}
```
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Doing so results in TODOs in the resulting semir, since we don't handle
combining the facet types together properly or doing lookup into them.
There's a test added demonstrating this, which will be made to work in
followups.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
If the `impl as` clause is on a generic interface, the parameters to the
generic may be constrained by _other_ interfaces. This then requires
another impl lookup, but it should be looking for a different impl since
it's for a different interface.
To avoid considering the same impl again, we discard it from
consideration if the interface itself does not match the interface being
queried.
Note that the query FacetType can have more than one interface in it
eventually, and a `context.TODO()` call is left to notify when we run
into this.
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
A value of type FacetAccessType can convert to a facet value of a target
FacetType if the value's underlying facet value's FacetType is
compatible.
A value of type FacetType can convert to another value of type FacetType
if the value's FacetType is compatible with the target FacetType.
During impl lookup, the comparison of the lookup type and the impl's
type needs to consider more than strict equality. If the impl's self
type is a FacetAccessType, we instead need to verify that the FacetType
of the lookup type and of the impl's self type are compatible (which is
like a problem of another impl lookup). For now we check that they are
equal by unwrapping the FacetAccessType to the constant facet value
within, and compare that with the lookup type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
If a type satisfies the requirements of a FacetType, then that type as a
value can be converted to a FacetValue, which binds the type value to
the FacetType.
For instance, if the class A implements an interface B, then
```
fn F(b:! B) {}
```
can be called with the type `A`
```
F(A);
```
This does not handle yet receiving non-type values matching a FacetType,
as that requires deducing the required FacetValue for the caller's
argument. Follow-up work will do this step.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When substituting into a generic in order to form a generic eval block,
we form `SpecificId`s to track the list of arguments that should
eventually be used to form a specific referenced by the eval block.
Values within that specific are not needed and won't ever be used, so
it's safe to skip forming them in the first place.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
For example, format the `ImplicitAs` interface as `Core.ImplicitAs`
rather than simply `ImplicitAs`.
When importing an entity in a namespace, also import a declaration of
the enclosing namespace if necessary so that we can determine its name.
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
The offsets were originally added to deal with churn from builtins in
the raw semir. In textual semir, we mostly see instruction IDs for
imports, and builtins have also settled down more.
On imports, where possible, use the `EntityNameId` for an import instead
of printing an instruction. Next, show the source location if we have a
node. Only show the instruction if there's no location.
This also exposes `Parse::Tree` and `TokenizedBuffer`, so that we can
pass a `SemIR::File` without the component parts. In particular this
allows us to get the `TokenizedBuffer` for import IRs without
substantial structural modifications. We may want to make these optional
for serialized `SemIR` later, but the nodes/tokens contain source
location, which we'd need for debug information -- so it's not clear how
much we can really make them optional without substantial information
loss.
Reduce arguments to just `File` in a few spots, as a result of the
accompanying `TokenizedBuffer` and `Parse::Tree`. Also updates style to
pass around `const File*` where the reference is maintained, instead of
`const File&`.
I was considering keeping a direct reference to the tree and tokens on
`Context`, but initially my thought was it wouldn't make much
difference. I can re-add those if desired, just as direct caching of the
`File` fields.
* Rewrite constraints are stored in a facet type, substituted, imported,
and formatted.
* We now distinguish `.Self` from other symbolic bindings in two ways:
* `.Self` itself now has an invalid compile time binding index (since it
doesn't bind to any of the generic parameters). As a result, we no
longer need to create a generic region in `handle_where.cpp`.
* There is a new phase tracking values that are only symbolic because
they transitively depend on `.Self`. This allows us to give the result
of a `where` expression template phase as long as it doesn't use any
symbolic constants other than `.Self` or other designators.
* `AddConstant` has been removed from `check/context` since it was only
used from `eval`. This meant less plumbing of the phase change.
* Evaluation of `BindSymbolicName` now also performs substitution into
its type.
* Include a bit more information in some diagnostics.
* `StringifyTypeExpr` outputs rewrites, which required adding support
for associated entities as well.
* Associated entities now have an entity name set when importing.
* Adds tests for some interesting cases with rewrites and uses of
`.Self` mixed with other symbolic constants.
Still to do:
* There is no validation that any particular type satisfies rewrite
constraints.
* Access to members of a facet type do not see the rewritten values.
* Impls don't recognize whether associated constants have rewrites
setting their values.
* No support for resolving facet types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
Adds `FacetAccessWitness` instruction and uses it in `member_access.cpp`
to support accessing members of facets. Still to do: interface witness
access is producing runtime values when it should produce symbolic
values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Stop rejecting `extend adapt` of non-class types such as struct and
tuple. These don't actually work just yet because name lookup into
struct and tuple types is a special case that doesn't handle adapters,
but this gets us a bit closer.
This also slightly improves error recovery for name lookup into an
invalid scope.
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
In preparation for changing integer literals to be of `IntLiteral` type.
Conversions from the integer literal type are only permitted when the
value fits within the destination type.
For now, if conversion cannot be checked because the source value is a
symbolic constant, produce a symbolic constant representing the
conversion rather than rejecting it.
Richard Smith
Dana Jansens
Geoff Romer
Boaz Brickner
Calvin
David Blaikie