Rearrange the file_test infrastructure so that we can customize the
mapping of file names to command line arguments. Map `module.modulemap`
files to corresponding Clang driver flags. In passing, also clean up the
interface for specifying custom argument replacements so that we don't
build a string map for each file we process, and stop using
`SmallVector::insert`.
Assisted-by: Gemini via Antigravity
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
This also switches to a more Bazel-based install layout, skipping the
FHS-based synthetic layout. The FHS-based layout is still reconstructed
explicitly when building an installable tar-ball.
The biggest change is to configure the just-built install as a Bazel
toolchain, including allowing it to build its own runtime libraries as
native Bazel libraries. This removes the need for a monolithic runtimes
build, all of that code logic is removed.
This should also pave the way to using the just-built toolchain for
doing a full 3-stage bootstrap. Building the 2nd stage is included here
as it was a particularly effective way to test that the Bazel
integration was fully working. Adding a 3rd-stage check for stability is
future work, but should be pretty easy.
There is a down-side: this uses the busybox to do the runtimes
compilation, which means they will be re-built after ~any change to
Carbon. However, the integration with Bazel should largely pay for this,
and we can continue to factor the tests away from depending on built
runtimes in most cases.
Now that we're building and testing the runtimes more directly, this
surfaced a problem with the layout of runtimes on macOS that is fixed
here. All of the Darwin OSes use a custom layout for their resource
directory compared to other targets. We now model this in both the C++
built runtimes and the Bazel built runtimes.
Assisted-by: Gemini via Antigravity
directory
This cleans up the `//toolchain/install/BUILD` file and the tree
generally to be more focused on arranging the actual installation rather
than preparing inputs to that installation.
I picke `//toolchain/runtimes` so we can put other runtimes preparation
logic there, but open to any other suggested organization.
There are other runtimes things that would in theory make sense to move
such as the `prebuilt_runtimes` logic, but a subsequent PR will delete
those and so I'm leaving them where they are for now.
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Mainly because "sorting_diagnostic_consumer" is legacy, since
`SortingDiagnosticConsumer` became `SortingConsumer`. Also better
reflecting contents of these files.
Where I'm not renaming, I'm less positive about dropping "diagnostics"
from "file_diagnostics" and "null_diagnostics" (which contain both a
consumer and emitter, and "null.h" seems like poor naming), so not doing
that here. Also "diagnostic.h" contains `struct Diagnostic`, so is a
decent fit.
Assisted-by: Google Antigravity with Gemini 3 Flash
The YAML test helpers didn't use the `Printable` abstraction in one
place and instead directly used `<<` with a `std::ostream`. This matches
the `require`s expression in the `error_test_helpers.h` printing logic
for `ErrorOr`, but fails to provide the necessary implementation for
`llvm::formatv` to succeed with the `Yaml::Value` type.
The main fix is to use `Printable` and to define the `Print` method in
terms of `llvm::raw_ostream`. We already have all the mapping hooks in
place to also support `std::ostream` when needed based on that
definition.
This also adds some constraints to the printing in
`error_test_helpers.h` so it is a bit less under-constrained and more
understandable when it is correctly being used. These are just tidying
though, they aren't what makes these headers work together.
I've added a test to try and make sure these test helpers compose as
well.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Replace all unexpected instruction ids in a line, not just the first
one. Otherwise you get something like this:
```
// CHECK:STDOUT: impl @<null name>: <unexpected>.inst{{[0-9A-F]+}}.loc20_6 as <unexpected>.inst6000002E.loc20_11;
```
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This change makes dumping and debugging work again with InstIds that are
now tagged with the CheckIRId. The textual representation of an InstId
is changed from `irN.instM` back to `instM` but the `M` is now a hex
value with the tag as part of it, which is the same number that is
physically in the `InstId::index` field. This prevents any cases where
we would potentially print incorrect values for large InstIds.
We teach the `dump` command in lldb to parse hex values for InstId so
that we can paste these numbers back into the debugger.
This also does a little restructuring in the same direction, following
#6124.
Leads want `Destroy` to work similarly now for all types. As a
consequence, there doesn't seem to be as much benefit to splitting off
aggregate destruction. In this PR, the `type.destroy` function can now
be expected to destroy anything that's destructible; that means it'll be
usable for the `final fn` once that support is available.
Similarly, this gets rid of the impls other than the single blanket
impl, now using `type.can_destroy`. Since they all need to use the same
function, there's no benefit to splitting approaches. Also, now it can
just be a `final impl` since there should be no need for people to
create specializations -- if this blanket impl applies, it means the
`final fn` is the same.
This also slips in `partial` support since there's no reason to have it
diverge anymore. Also `abstract`, which I'm not sure is broadly testable
since most cases it'd come up, the `abstract` keyword is explicitly
detected/rejected.
Note though that this doesn't make any really big changes. It's just
realigning on the leads decision. I'm going this way to try to reduce
name-related churn for other changes.
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.
Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.
Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
`fn destroy` is being removed per decision on #6124. It seems like the
relevant decision will result in no more keyword-based function names,
so this is removing all related support.
The main direction of this change is the edits to `destroy.carbon`
(matching in both prelude and min_prelude).
Previously there was a no-op blanket impl for `Destroy`, which hid all
missing implementations of `Destroy`. This does a few things:
- Sets up builtin aggregate destruction for struct and tuple types as
before, but also adds C++ class types and array types to the same
handling. (all as a TODO for actual implementation)
- Also maybe-unformed destruction, for now at least. (there's a chance I
may try a different approach on this, but the impl lookup wasn't working
as I'd hope in order to write it in code)
- Adds handlers for simple things that are easy to do in code: `type`,
`bool`, pointers. (because these are no-op destruction)
- Redirect `const T` destruction to `T` destruction.
This leaves as future issues:
- `partial T` destruction. (this can't be done similar to `const`
because it only works for non-`final` class types; I think `class`
definitions should just generate what's needed)
- Destruction of other prelude-provided types. (will probably come up as
we implement class destruction, that the adapted builtin type doesn't
implement `Destroy` -- but may end up special-casing that in a way that
moots it)
This moves the `&` operator from `facet_types.carbon` to
`convert.carbon` because more things need to handle type and now that
we're getting separate copy and destroy interfaces. It should be
low-cost (an interface and builtin) so hopefully this is the right
balance for complexity and re-use.
A few tests are also edited in order to focus them more on what they
intend to test, and avoid a `Destroy` dependency.
When returning a value from a function whose return type has a by-copy
initializing representation, perform initialization like we do when the
return type has an in-place initializing representation. This makes our
SemIR representation more uniform, as the return expression will now
always be an initializing expression rather than a value expression, but
more importantly it means that attempts to return a non-copyable type by
value now fail, even if the type has a by-copy initializing
representation.
This catches a bunch of places where we were returning a value of an
unconstrained template parameter `T:! type`, which we were incorrectly
allowing because we didn't notice it was not copyable. Unfortunately
this then requires quite a few test updates.
Like #6034, this exposes a lowering issue where lowering crashes when
attempting to lower a specific copy operation for certain types; a
couple more tests are temporarily disabled here. An upcoming PR
dependent on this one will fix the issue and re-enable those tests.
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
* Treat `MaybeUnformed` and `partial` as qualifiers, like `const`.
* Allow pointer conversions to add qualifiers.
* Allow unsafe pointer conversions to remove qualifiers.
* Allow conversions on non-reference expressions to drop `const`.
* Allow unsafe conversions on any expression to drop `const`.
* Allow unsafe conversions on non-initializing expressions to drop
`partial`. For initializing expressions, we should initialize the
vptr when dropping `partial`; this is not yet supported so we reject.
* Allow conversions on reference expressions to add `MaybeUnformed`.
* Allow unsafe conversions on reference expressions to drop
`MaybeUnformed`. For non-reference expressions, additional work is
required, because the value / initializing representation may not
match between `T` and `MaybeUnformed(T)`, so those are rejected for
now.
Following the direction of #5913, add support for parsing an `unsafe as`
operator. For now, we allow one additional conversion using `unsafe as`
beyond the conversions supported by `as`: we permit pointer conversions
that remove qualifiers, such as `const T*` -> `T*`.
Add a `Core.String` class to the prelude representing a string view, and
rename the `String` keyword to `str` and make it evaluate to
`Core.String`.
`Core.String` is represented as a pair of a pointer to a character
(actually, to the first character of a string, but we don't have a way
of modeling that yet) and a size (which should be pointer-width, but is
currently always a `u64` as we don't have a `usize` equivalent yet).
`Core.String` values are generated directly by the toolchain for string
literal expressions.
This follows the direction established at the recent summit, but the
design implemented here has not been through the proposal process yet.
This removes a bunch of manual filesystem helpers and complexity that
are directly provided by the new library.
It also moves all of the install paths detection to use
`std::filesystem::path` instead of the LLVM path library. The goal is to
consolidate all our logic onto a single stack, and the standard one
seems the best for that purpose. This does give up some of the
optimizations of this code to avoid memory allocation, but in practice
that likely isn't a critical issue. And with the new filesystem library
we can likely do more to avoid that by using directory-object-relative
filesystem access. However, that will have to wait for moving more parts
of the toolchain over to use this set of filesystem abstractions. There
is a related TODO left in the manifest handling code.
Add missing builtins for float compound assignment, for building a
FloatType, and for converting a float literal to FloatType. Switch
`Core.Float` to being a class and add impls for the various
floating-point operators.
---------
Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
When an error diagnostic has an unattached location, for example because
the diagnostic points into a file that's in the prelude, use the next
attached location to position the error diagnostic's CHECK line. In
particular, if the error is followed by a note, use the position of the
note to determine where to place the error.
This exposes a general mechanism to do final fixups of the CHECK lines
to individual file_test binaries, which the toolchain's binary uses to
special-case error / warning CHECK lines.
Use it to dump the AST that includes a generated C++ thunk.
Based on #5917.
Also added printing of the full actual text when check fails to make
debugging easier.
Changed line replacement to allow removing complete lines.
Part of #5514.
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This is in anticipation of having `class` depending on the `Destroy`
interface, in order to automatically generate implementations of it.
I'm doing some sorting of imports in the prelude too, which I hope will
be uncontroversial; clang-format would do similar in C++...
Use `full.carbon` min-prelude for any tests using the full prelude. A
few tests were using it unnecessarily and are changed to a more minimal
one in the process.
Any test which does not include some min-prelude will now fail with an
error.
Stop using the clang tooling library to build an ASTUnit; that library
is set up to process clang frontend arguments, assuming that something
has already built frontend arguments from the compiler arguments. It is
also too encapsulated and doesn't let us inspect and modify the compiler
invocation before it's executed.
Instead, build the AST unit directly in two phases:
* FIrst, take a list of clang driver arguments and convert them into a
list of compiler arguments, using `clang::createInvocation`. Internally,
this uses the clang driver to build a frontend invocation, including
building system-specific include paths as needed.
* Then, directly build an ASTUnit from this compiler invocation.
I've factored this so that we can split out the `createInvocation` step,
with the intention that we may want to move it out of check and into the
carbon driver with the rest of the driver-level argument handling, and
we may want to customize some of the clang options before we invoke the
clang frontend with that set of options.
In order to make the invocation reusable, it no longer depends on the
name of the carbon file importing the C++ code. In place of synthesizing
a header file name as `<foo.carbon>.generated.cpp_imports.h`, we now
insert line marker directives into the generated header so that errors
in that header cause Clang to point a diagnostic back at the Carbon
source file itself. This results in a minor improvement in the
diagnostic output: we no longer refer to a nonexistent generated file.
But the snippet still contains text that doesn't match the source code,
so it remains imperfect.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
I've been mulling this mainly for the parameter complexity of
check/lower, but doing lex/parse for symmetry.
I'm motivated by the plan to move dumping for all of them into the
respective functions, because of discussion about llvm-verifier. That
basically would add another bool parameter (or more) to each of these.
My instinct is we're going to probably accrue a little more over time,
so I'm suggesting this as maybe adding the boundary a little simpler
and/or easier to read.
Note it may make sense to refactor a little further, e.g. maybe
Lower::Context could receive the full set of options and pick out what
it wants, but I figured creating the struct itself would be a decent
start.
I'm trying to put things into options when we can produce a reasonable
default if the user doesn't assign a value. I'm using an explicit
constructor so that values can be added without affecting every caller.
A different factoring would be to pass in everything through the param
struct, but that just felt weird when I was trying it out.
Removing `inst_namer` and `module_name` from `LowerToLLVM` params --
both of these can be inferred from `sem_ir`, and I'm not seeing a
particular reason to maintain them at the call site.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
Add check support for `for` loops following #1885. This also adds a
basic `Optional` type to the prelude, as that's necessary to support the
new `Iterate` interface.
Depends on #5688, #5697. Those PRs aren't stacked here, but this change
will crash until they land.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The `full.carbon` prelude just sets a flag indicating an explicit intent
to include the full prelude. Once all tests include some prelude file,
an error can be enabled (currently it's commented out) that requires an
`INCLUDE-FILE` of some min-prelude to be present in all `check/` and
`lower/` file tests.
The none.carbon min-prelude is not just an empty prelude, it also
prevents any prelude from being imported at all. So no import machinery
runs before the test, only the `package` statement from the prelude
would run.
Use the none.carbon min-prelude in a few tests that were specifying
`--no-prelude-import` to give it a trial run.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
Now that included files can specify `EXTRA-ARGS`, this uses that to
handle min_prelude files. Also moves `As`/`ImplicitAs` out to a shared
file, partly because we duplicate it a few times over, partly just to
show that it works.
Also removes the `min_prelude/` subdirectories because many of these
files were touched by autoupdate regardless. I noticed one conflict for
`impl_thunk.carbon`, so renaming that one to
`impl_thunk_min_prelude.carbon`.
`GetArgReplacements` I simply noticed was unused, so removing it.
The former signature unintentionally allowed any parameter and result
types, because it only checked that the type of the type was `type`,
which is tautological (for non-error values). Also add missing tests for
the builtin.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Adds minimal defaults for codegen so that those tests don't need to
specify the full command line.
Moves driver/testdata/compile to check/testdata/basics/raw_sem_ir, which
seems like it better reflects the focus. Removes the textual IR test
because we have plenty of those now.
Moves a multiline token diagnostic test to parse because (a) diagnostics
doesn't have other tests and (b) this is really testing the way that
parse structures the location.
Drops `--include-diagnostic-kind` from some driver tests that aren't
testing a diagnostic, so the flag felt a bit like noise (even before
this change, there are a few tests that don't specify it because they're
not intended to test an emitted diagnostic, just high-level diagnostic
behaviors).
Adds some comments to reflect my understanding of why a test exists,
when I was pausing to think about it.
Modifies the stdin test to do more dumps; which happens to expose we
currently misbehave.
This doesn't remove no-longer-needed flags; I'll do that in a separate
PR after this is merged.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Richard Smith
Geoff Romer
Chandler Carruth
Jon Ross-Perkins
Dana Jansens
Boaz Brickner