This change ensures that a function signature always starts with an
`IdentifierNameMaybeBeforeSignature` node (renamed from
`IdentifierNameBeforeParams`), even in the case of function declarations
like `fn F -> T` that have no parameter list. As a consequence, this
ensures that we push new entries onto `pattern_block_stack` and
`full_pattern_stack` when we start processing the function signature.
Following the direction of #5913, add support for parsing an `unsafe as`
operator. For now, we allow one additional conversion using `unsafe as`
beyond the conversions supported by `as`: we permit pointer conversions
that remove qualifiers, such as `const T*` -> `T*`.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Parameter lists need substantially different treatment than tuple
patterns in other contexts, so this change splits them into separate
parse node kinds.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
I'm working to make sure remaining diagnostics have coverage, at least
the ones I'd previously added a TODO for. Note in particular that I
couldn't figure out a repro for UnaryOperatorRequiresWhitespace; if you
have one, I can add a test, but otherwise maybe it's actually
unreachable due to being diagnosed through infix logic (or, maybe
this'll let fuzzing tell me an example).
This refactors the diagnostic kind coverage check into something that
also works for node kinds. Then, since this points out a few node kinds
that aren't having their parse verified, I'm adding minor tests for
those.
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Includes support for the `impls`, `=`, and `==` requirement operators to
the right of a `where`, but `and` to allow multiple requirements is
still a TODO.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
I've been thinking about this since we decided to add placeholders in
the parse tree. This allows a clearer division of work in check
handling, where we were doing work for ExprOpenParen that's only
necessary for tuples (splitting/renaming handle_paren.cpp accordingly).
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
This undoes parts of #3515 in order to allow PushGlobalInit to be called
when the initializer is called, instead of at the end of the binding
pattern. The current approach is fragile because supported patterns will
become more complex. We also will likely want similar support in `let`,
which puts the initializer first, so this offers a consistent approach
for both.
[Looking
back](https://discord.com/channels/655572317891461132/655578254970716160/1184237511766179840),
this is more or less the second option in that message, but using the
PeekNextIs to avoid vagueness about what's being popped first.
Note I'm putting in PeekNextIs for what I'm hoping will be a pretty
narrow use-case. I could've added depth arguments to the Peek functions,
but that would've rippled through a number of APIs and it's not clear to
me that this has generic utility. I mean, right now it could just be
PeekNextIsVariableInitializer, since it's only optional in that case.
Also stop supporting `var` with initializer inside `for`.
Resolves TODO in `handle_variable.cpp`
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This leaves a single state for each in the expr loop. I was trying to
think through ways to have per-token states, but they felt sort of
bulky.
Note this is more verbose: but I think the long-term is going to be that
when we start wanting to add handlers, we're going to need to switch to
different names based on the token found. As a consequence, the parse
state logic will end up diverging a little, and we'll just want to align
towards boilerplate handlers.
Short-term, this opens up a path for saying that each parse node
corresponds to precisely one token in success states, and separates out
what were becoming big handler functions in check.
This remains structurally valid although we don't use this operator or
have a design for it, this at least fixes a fuzzer-found crash.
---------
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
This is also doing the parse node split, allowing lower reliance in
formatter on the tokenized buffer (something that I may be touching more
due to import handling).
(Split out of #3410)
Consistently use `ParenExpr` solely for parenthesized single
expressions, and use more syntax-oriented terminology for states and
nodes that might represent either a `ParenExpr` or a tuple literal.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
This removes a (very) hot branch in the lexer where we need to special
case when a token is the first token and can't look at its previous
token. It also seems like a generally nice change to the structure of
both the token buffer and parse tree as there are now bracketing
elements for both ends and we should be able to avoid similar branching
in the future.
Mostly mechanical updates to the lexer and parser code to handle this,
but also needed to special case the location information in the
autoupdate code. And then the usual large body of auto-updated tests.
No benchmark data for this change alone as in isolation and in the
current lexer structure it doesn't make a big difference. But this
branch was particularly difficult to handle when trying to update the
whitespace skipping code to be faster, and so I think it is worth
systematically avoiding the special case here.
This makes the difference between errors and lower-level diagnostics
visible to users, and aligns the toolchain's behavior with the
expectations in `driver_fuzzer.cpp`.
Continuing with #3070. Just a dir and file rename (mostly removing
prefixes, although for parse_tree_fuzzer and parse_tree_file_test I'm
dropping "tree" instead of "parse"). Everything in the parse dir should
be marked as a move.
Geoff Romer
Dana JansensandJon Ross-Perkins
David BlaikieandJon Ross-Perkins
Chandler Carruthandjosh11b
Jacob Schneider