Note, this supports plurals, but doesn't apply it anywhere. I'm mainly
doing that to demonstrate the approach regarding syntax. See
format_providers.h for details.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Move subtree sizes over to TreeAndSubtrees, using the different
structure to represent the additional parse work that occurs, as well as
making it clear which functions require the extra information. My intent
is to make it hard to use this by accident.
The subtree size is still tracked during Parse::Tree construction. I
think a lot of that can be cleaned up, although we use it during
placeholder assignment so it may take some work. I wanted to see what
people thought about this before taking action on such a change.
I'm using a 1m line source file generated by #4124 for testing. Command
is `time bazel-bin/toolchain/install/prefix_root/bin/carbon compile
--phase=check --dump-mem-usage ~/tmp/data.carbon`
At head, what I'm seeing is:
```
...
parse_tree_.node_impls_:
used_bytes: 61516116
reserved_bytes: 61516116
...
Total:
used_bytes: 447814230
reserved_bytes: 551663894
...
1.43s user 0.14s system 99% cpu 1.565 total
```
With `Tree::Verify` disabled completely, it looks like:
```
parse_tree_.node_impls_:
used_bytes: 41010744
reserved_bytes: 41010744
...
Total:
used_bytes: 427308858
reserved_bytes: 531158522
...
1.20s user 0.13s system 99% cpu 1.332 total
```
Re-enabling just the basic verification (what is now `Tree::Verify`),
I'm seeing maybe 0.05s slower, but that's within noise for my system. I
do see variability in my timing results, and overall I think this is a
0.2s +/- 0.1s improvement versus the earlier (always testing `Extract`
code) implementation. That's opt; debug builds will be unaffected,
because the same checking occurs as before.
Note, the subtree size is a third of the node representation, which is
why I'm showing the decrease in memory usage here.
Following up on discussion from #3948, doing a general rename of
"enclosing scope" to "parent scope" (and "enclosing scopes" to "ancestor
scopes"). The intent is to improve understandability and collide less
with C++ terminology for "enclosing scope". Note this changes most uses
of "enclosing", but leaves behind a few like "enclosing function" and
"enclosing block".
Note this does create some "parent class" mentions for "adapt" and "var"
(the class they're within), which is maybe unfortunate, but we'd
probably say "base class" if we meant inheritance so perhaps that's
okay. Along the same lines, these are the only `parent_class` uses I see
now, and we do have a few `base_class`.
Instead of tracking the token associated with a parse node in the `.def`
file macro, track it on the typed node instead. List the token as a
field inside the node structure to show the order of the token relative
to the other components of the grammar production, and to allow the
token index to be accessed when the node is extracted.
Remove the corresponding information from the `.def` file, leaving
behind just a list of parse node kinds in the majority of cases.
This also removes the checking of the token kind associated with a parse
node in the case where the parse node has errors. Previously we had a
flag on the node kind to indicate whether we should check this, but per
[discord
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1246214418979881052),
we have decided to remove this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When we expect a semicolon, we should be able to provide more standard
recovery.
Note this affects a test of `base`, but it looks like a partial
improvement (the prior line was moving too far). Still, it looks like
recovery isn't handling `{}` quite right. I'm not trying to address that
here though -- leaving a TODO.
This is something I noticed working on
https://github.com/carbon-language/carbon-lang/pull/3884; I think we
have more functions named Diagnose* at present than Emit* or Report*, so
just trying to consolidate. Note a couple Diagnose* functions do a
little more validation, but maybe those should actually be renamed away
(zygoloid had mentioned wanting to generally split out diagnostics to
their own function, and then we'd have it be a more common pattern).
In parse, form a list of methods that are defined inline, tracking where
they start, where they end, and which other inline methods are nested
within them.
In check, when we reach an inline method body, skip it and add it to a
worklist to be processed later. We also track when we reach the start
and end of a context in which inline method bodies are deferred, so that
we know when to replay the bodies.
When suspending a function definition to be processed later, the
`DeclNameStack` entry is moved to separate storage, including popping
the corresponding scopes from the scope stack and removing the
corresponding lexical names from lexical lookup. Later, when we return
to the function and parse its definition, the `DeclNameStack` entry is
restored. The same is done when we reach the end of a nested context
that can have inline methods, so that we can reenter the nested scope
before processing its members.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
We already do this with things like llvm::DenseMapInfo, I don't know why
I was doing this with format_provider. But this should be more
consistent, and slightly better for not entering another library's
namespace.
This builds on the series of changes to NodeKinds, aiming to simplify
the NodeKind implementation a little, also making it clearer that
there's a single associated token for each parse node (or, for
placeholders/invalid parses, not validated).
Note that prior to the relevant changes, there were nodes with multiple
tokens. This change is also locking in the approach of one token per
parse node, by refactoring macros to stop supporting multiple.
The main difference I'm aiming for is that clangd doesn't complain about
the struct being unused, but it does miss the function's use. But really
these are specific to formatv for diagnostics, so this is more clearly
marking such, and probably makes for a better pattern for the future.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
These are manual fixes; mostly from clang-tidy, some from clangd (which
notes unused includes).
In typed_insts, adding inlline due to misc-definitions-in-headers. Per
discussion, clang-tidy is wrong, but inline silences it.
For parameter name skew in definition versus declaration, I'm just using
the name from the definition.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This gets to a lifetime subtlety, particularly with things like the
sorting diagnostic consumer that delay output. In order to reduce the
chance of accidental references, disallow StringRef in the diagnostics.
For example:
```
./toolchain/diagnostics/diagnostic_emitter.h:162:5: error: static_assert failed due to requirement '!std::is_same_v<llvm::StringRef, llvm::StringRef>' "Use std::string or llvm::StringLiteral for diagnostic lifetimes."
static_assert(
^
toolchain/check/convert.cpp:477:11: note: in instantiation of member function 'Carbon::Internal::DiagnosticBase<std::string, std::string, llvm::StringRef>::DiagnosticBase' requested here
CARBON_DIAGNOSTIC(StructInitMissingFieldInConversion, Error,
^
./toolchain/diagnostics/diagnostic_emitter.h:47:7: note: expanded from macro 'CARBON_DIAGNOSTIC'
::Carbon::Internal::DiagnosticBase<__VA_ARGS__>( \
^
```
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Can specify which tokens are allowed generally, and any additional
tokens that only occur when the parse node has an error.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Continuing with #3070. Just a dir and file rename (only prefix change is
lexer_file_test). Everything in the lex dir should be marked as a move.
Note, I think this closes#3070. There may still be further cleanup
later, but the organizational changes suggested there are being
completed.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Continuing with #3070. Just a dir and file rename (mostly removing
prefixes, although for parse_tree_fuzzer and parse_tree_file_test I'm
dropping "tree" instead of "parse"). Everything in the parse dir should
be marked as a move.
Jon Ross-Perkins
Chandler Carruth
josh11bandJon Ross-Perkins
Geoff RomerandRichard Smith