- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
I think this would probably have prevented the missed include in #5469
-- it would've just failed completely with a "missing prelude"
diagnostic.
Also note this excludes the included IR from output, because it's
probably low-value to print.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
This follows the pattern used elsewhere, and allows facet types in eval
blocks to directly reference their operands instead of doing so
indirectly via a `ConstantId` attached to the generic. This prepares us
for making `ConstantId`s always be unattached.
In passing, add a stringified version of the `InstId` to diagnostics in
a couple of places where it seems useful.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Give them a value representation of copy, and allow conversions between
two facet values of the same type to work.
Convert was assuming that facet values are compile time constants, but
thye can also be runtime values. In that case, we have no support for
converting to a different facet value of a different facet type. But if
the types are equal then it's all fine.
In theory it seems that we should be able to convert if the target facet
type can be found through the source value's FacetType. But currently
that happens through impl lookup and it requires constant values. Adding
a test for this.
Related to #5241
Emitting definitions in check. This resolves the crash in lowering which
necessitated definitions be emitted.
Some of the test changes need further review.
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
Don't look for a user-defined conversion (implementation of `As` or
`ImplicitAs`) if the builtin conversion to a facet type fails impl
lookup. This is the behavior we want, and reduces noise in diagnostics.
Partial implementation of #5122. Still to do:
* Give an error if the users tries to implement such a conversion, since
it is now unreachable.
* Add notes to the diagnostic explaining why impl lookup failed.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
When transforming instructions with symbolic constant values into the
eval block, we previously special-cased `bind_symbolic_name` (and
`symbolic_binding_pattern`) because they are places where symbolicness
is introduced, rather than propagated from operands, and just copied
them into the eval block. However, `bind_symbolic_name` can be dependent
on other symbolic constants, because it can have a type that is
dependent. In this case, the copy in the eval block would not have its
type properly adjusted to refer to the type within the eval block.
Fix this by performing substitution into `bind_symbolic_name` rather
than copying it directly, and instead, detect cases where substitution
determined that the instruction was unchanged despite having a symbolic
constant value, and force it to be rebuilt in that case.
I've not found any way that the previous behavior actually caused
problems, or affected the observable behavior of the toolchain. The type
of these instructions in the eval block doesn't make much difference to
anything because they get immediately replaced by their corresponding
argument values when we run the eval block. But this came up and caused
some test output churn when I was making a different change, and it
seems like a fix to our representation even if it's not changing
behavior, so I'm splitting it out so it can be handled separately.
When converting from a facet value (an instruction whose type is
FacetType), we require making a FacetAccessType
to have a type instruction when building the resulting FacetValue.
Otherwise, the conversion is the same for values of type TypeType, and
we relax the convert function to support either.
Corrects the test expectations for converting `Goat as Animal`, a facet
value of type FacetType, into `Eats`, a facet type of type TypeType.
This would be a promotion in the typish hierarchy which is incorrect. We
had an extra case in Convert that was handling this, and it's now
removed. `Animal`, a facet type, does still correctly convert into
`Eats`, a facet type, if `impl Animal as Eats` exists.
When converting to a facet there are three different failure modes:
1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.
Closes#5027
Currently this test fails with trying to access a comptime function with
runtime values:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+7]]:3: error: non-constant call to compile-time-only function [NonConstantCallToCompTimeOnlyFunction]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR: core/prelude/operators/bitwise.carbon:96:3: note: compile-time-only function declared here [CompTimeOnlyFunctionHere]
// CHECK:STDERR: fn Op[self: Self](other: Self) -> Self = "type.and";
// CHECK:STDERR: ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CHECK:STDERR:
a & b;
}
```
The issue is that the BitAnd impl for facet types is matching on any
value of any type:
```
impl forall [T:! type] T as BitAnd
```
What we really want is for it to match on facet types (which are type
values), which is written as:
```
impl type as BitAnd
```
After this change, the error makes more sense in the above test:
```
fn F() {
let a: J = {} as J;
let b: J = {} as J;
// CHECK:STDERR: fail_bit_and_values_no_impl.carbon:[[@LINE+4]]:3: error: cannot access member of interface `Core.BitAnd` in type `J` that does not implement that interface [MissingImplInMemberAccess]
// CHECK:STDERR: a & b;
// CHECK:STDERR: ^~~~~
// CHECK:STDERR:
a & b;
}
```
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Doing so results in TODOs in the resulting semir, since we don't handle
combining the facet types together properly or doing lookup into them.
There's a test added demonstrating this, which will be made to work in
followups.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
If the `impl as` clause is on a generic interface, the parameters to the
generic may be constrained by _other_ interfaces. This then requires
another impl lookup, but it should be looking for a different impl since
it's for a different interface.
To avoid considering the same impl again, we discard it from
consideration if the interface itself does not match the interface being
queried.
Note that the query FacetType can have more than one interface in it
eventually, and a `context.TODO()` call is left to notify when we run
into this.
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
A value of type FacetAccessType can convert to a facet value of a target
FacetType if the value's underlying facet value's FacetType is
compatible.
A value of type FacetType can convert to another value of type FacetType
if the value's FacetType is compatible with the target FacetType.
During impl lookup, the comparison of the lookup type and the impl's
type needs to consider more than strict equality. If the impl's self
type is a FacetAccessType, we instead need to verify that the FacetType
of the lookup type and of the impl's self type are compatible (which is
like a problem of another impl lookup). For now we check that they are
equal by unwrapping the FacetAccessType to the constant facet value
within, and compare that with the lookup type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
If a type satisfies the requirements of a FacetType, then that type as a
value can be converted to a FacetValue, which binds the type value to
the FacetType.
For instance, if the class A implements an interface B, then
```
fn F(b:! B) {}
```
can be called with the type `A`
```
F(A);
```
This does not handle yet receiving non-type values matching a FacetType,
as that requires deducing the required FacetValue for the caller's
argument. Follow-up work will do this step.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Richard Smith
Jon Ross-Perkins
Geoff Romer
Alina Sbirlea
Boaz Brickner
Calvin
David Blaikie