In order to format comments, it's helpful if they're tracked. This
tracks them separately from tokens in order to avoid interfering with
parse; it'd be inconvenient if comment tokens could show up in arbitrary
locations, albeit possible to support.
This additionally extracts out the TokenIterator support into a template
in order to generally have it available for IndexBase types. I'm only
adding it for CommentInfo, not sure if we'll want it elsewhere, but this
structure still felt like a good fit.
The locations point to the first instruction in the generic that needed
the relevant constant value or type.
For now, this must makes the formatted SemIR a bit more useful, but in
the future it will also provide locations for diagnostics caused by
monomorphization failure.
Since formatting covers comments, and the CHECK lines are in comments,
it can create recursive behaviors. This introduces AUTOUPDATE-SPLIT as a
way of formally designating a split to exclusively be used for
autoupdate output.
This extracts out the SourceBuffer handling of `-` in order to trivially
share it.
Note this still has a number of TODOs, it's just setting up the
essential subcommand infrastructure, with some tests demonstrating that
it at least does something.
This should substantially reduce the total build size of `-c dbg`
builds, and especially improve cache hits during incremental
development. I'm seeing over 50% reduction total on Linux in just the
raw size of a complete debug build. Even on macOS where we can't use
split DWARF there are substantial reductions.
Note that LLDB and GDB want slightly different flags to have the best
experience with split debug information, and so the build and
documentation have been updated to enable LLDB's flags by default but
provide clear instructions for switching to GDB's flags, and they are
structured so that this can be done persistently for an individual
developer.
This adds deduction in all the cases where we can match the instruction
fields of the parameter against the corresponding instruction fields of
the argument. This handles all current type constants except for struct
types, for which we would want to match by field name.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Refactor the current function call deduction logic to make it reusable.
Call into it from `impl` deduction. Also build a generic region for the
definition portion of a generic `impl` and substitute into it before
accessing the witness in a specific `impl`.
This is enough to get simple uses of generic `impl`s to work. The main
blocker for more complex cases is that we have very little support for
non-trivial deduction, so while we can deduce `forall [T:! type] T as
I`, we can't deduce `forall [T:! type] C as I(T)` yet.
Instead of stringifying types in the caller in some cases, add new types
to represent:
- `InstIdAsType`: an `InstId` diagnostic argument that represents a type
expression that should be included in the diagnostic
- `InstIdAsTypeOfExpr`: an `InstId` diagnostic argument that represents
an expression whose type should be included in the diagnostic
For these cases, we can produce more user-friendly descriptions of a
type than we can with a canonicalized `TypeId`. Add comments to
discourage using `TypeId` diagnostic arguments when one of the above can
be used, and move over existing uses where it's straightforward to do
so.
Move type stringification code to its own files and out of `SemIR::File`
to make `File` smaller and to further discourage the direct use of the
stringification logic.
Also update type printing to include the `` ` `` delimiters surrounding
the type. The intent is that we will eventually want to include other
information when formatting a type, like Clang does when printing a
typedef (`'string' (aka 'std::basic_string<char>')`), and such
formatting requires that the diagnostic machinery produces the `` ` ``s
itself.
There are a couple of cases where we really want to format valid Carbon
type syntax directly into a diagnostic, rather than an `aka` or similar,
because the diagnostic text includes part of the type itself, for
example: ``"consider using `partial {0}`"``. For such cases, a `Raw`
form of the diagnostic argument types is added: `TypeIdAsRawType` and
`InstIdAsRawType`. In principle we could instead use ``"consider using
`partial {0:raw}`"``, but our diagnostic machinery isn't set up for
that.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Causes the default development (`fastbuild`) Bazel build and test to
both use ASan, minimal optimizations, and produce good backtraces with
source locations.
This also fixes all of the non-host configs that were deeply broken for
the latest releases of Bazel going back quite some time.
The intent of our our Bazel toolchain config was for a minimally
optimized, minimal debug info, and ASan + UBSan configuration to be the
`fastbuild`, or the default development build of the project. This
matches its inclusion of asserts, etc.
At some point quite some time ago, all of this stopped working. Bazel no
longer has a `nonhost` feature. This was disabled a long time ago,
briefly argued to be re-enabled, but has persistently been removed.
However, since then the host and non-host features have been separated
including the compilation mode, and so none of that is needed now.
Instead, we can use a much simpler and more principled approach to all
of the feature configuration now which this PR implements.
However, we added TCMalloc _after_ all of the ASan stuff became broken,
and so we never saw that it is fundamentally incompatible with ASan. So
this PR also reworks how TCMalloc is used to only apply to `-c opt`
builds on Linux, and it also explicitly disables it when using
`--config=asan`. I've not found a convenient way to tie the malloc
library choice to a toolchain feature in Bazel, so this relies on the
config being used rather than the feature in isolation.
Last but not least, with this change `fastbuild` creates substantially
larger output and so this change also passes several new flags to reduce
the size costs. One is a general improvement from outlining ASan
instrumentation. The others are in a special feature as they reduce the
error message quality for two of the more expensive UBSan checks in
favor of small generated code size. Keeping these last two separate
allows disabling this locally if needed to debug a failure.
When profiling, these jumped out as good inline candidates that happened
to be out-of-line, this just moves them inline so that they're
available. I think as much as 10% improvement in check-phase from this,
but I haven't run detailed before/after measurements as these changes
seemed minimally disruptive.
Also switched from `CHECK` to `DCHECK` in one place that seems
especially hot and where the check itself seems reasonable to only do in
debug builds. Left a comment since we rarely need to remove these any
more.
llvm::function_ref (like std::unique_ptr, for instance) already has a
null/empty state, so use that to avoid confusion/duplication of empty
states between optional and the nested function_refs.
This should free up quite a bit of space and even make our builds faster
by avoiding duplicating every output. The syntax for this flag is
counter intuitive, so I've left a comment explaining it.
With this, we now check:
* The left argument to `where` is a facet type
* The right argument of a rewrite (`=`) requirement converts to the type
of the left argument.
* The left argument of an `impls` requirement is a type and the right
argument is a facet type.
No checking is done for `==` constraints yet.
In addition, make the "is facet type" query into its own function and
fix some comments noticed as part of this change.
This change reveals that accessing the members of a facet, like `.Self`,
isn't doing the right thing, and will have to be fixed in a follow-on
PR. Some tests have been adjusted or disabled as a result.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Updates `SemIR::Function::GetParamFromParamRefId` to return more
information in the form of a new `ParamInfo` struct. This struct has a
method for getting the `NameId` from the name binding instruction. The
callers previously got it from the `Param` instruction, but the plan is
for that instruction to no longer be associated with a name.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
Not sure about error recovery options - can/should we drop the
definition as a means of recovery when building the SemIR? I guess
probably not, so I guess this change is about right.
Phrasing of the error message I'm certainly open to.
This makes the code more resilient to changes in the structure of
parameter insts, and could help avoid bugs by making the
ImportRefResolver's data structures the single source of truth.
According to
https://docs.carbon-lang.dev/docs/design/generics/details.html#adapting-types:
> You can add any declaration that you could add to a class except for
declarations that would change the representation of the type. This
means you can add methods, functions, interface implementations, and
aliases, but not fields, base classes, or virtual functions. The
specific implementations of virtual functions are part of the type
representation, and so no virtual functions may be overridden in an
adapter either.
So, let's check/reject that.
Checking at the end of the class ensures that no matter the order of
methods and adapt statements, the issue will still be correctly
diagnosed.
If the bucket is of size zero or one, which is expected to be the common
case, then store it directly. For the remaining cases, use a side table
of lookup buckets.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Update impl handling to more closely match other kinds of declaration,
including support for declaring and defining gneeric `impl`s.
When of performing redeclaration lookup for impls by looking for the
self and constraint type, produce a list of impls rather than a single
impl because it's possible for there to be multiple impls with different
deduced parameters but the same self type and constraint. Following
#3763, only consider impls to be redeclarations if they're spelled the
same, not just if they have the same self and constraint types.
No support yet for impl selection to deduce the arguments of a generic
impl.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This only sets the symbolizer for our more used targets; not sure if
there's a great way to set it everywhere (I suppose I could try wrapping
cc_binary etc rules if there's a strong preference).
There is a downside here, symbolizing a fastbuild crash seems to take
about 3s. Not sure if there's a good way to get a faster llvm-symbolizer
execution...?
I tried running with the new LLVM update without the
LLVM_SYMBOLIZER_PATH, and it looks like that's insufficient. With the
settings, I now get readable crashes:
```
#9 0x000055dc007d1724 void Carbon::Internal::CheckFail<Carbon::TemplateString<5>{"FATAL"}, Carbon::TemplateString<27>{"toolchain/driver/driver.cpp"}, 84, Carbon::TemplateString<0>{}, Carbon::TemplateString<3>{"err"}>() (/usr/local/google/home/jperkins/.cache/bazel/_bazel_jperkins/85deb7d9d96f7e0e80b42618a55969d7/sandbox/linux-sandbox/9383/execroot/_main/bazel-out/k8-fastbuild/bin/toolchain/testing/file_test.runfiles/_main/toolchain/testing/file_test+0x2894724)
```
Note the LLVM update is for
https://github.com/llvm/llvm-project/pull/109021
`ToolContext` should be explicitly initialized.
`-c` can still require a valid, writable `-o` path.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
When an instruction makes an absolute reference to another instruction,
such as when `assoc_const` refers to the declaration of the associated
constant in an interface, substitution into that instruction should not
substitute into the referenced instruction.
Mark the corresponding `InstId` fields in the typed instructions as
being absolute by giving them a distinct ID type that `Subst` doesn't
substitute into. This formation of unnecessarily complicated SemIR that
could in some cases lead to a CHECK failure when printing formatted
SemIR because the same instruction ends up in multiple scopes.
One of the things that ClangRunnerTest is doing is capturing
stderr/stdout because clang prints to it directly. This adds support for
that to FileTest.
I'm renaming the current `capture_output` field to `dump_output` because
the name is ambiguous after this change, and the flag is already named
`--dump_output`. It's still not great, but at least it's more distinct.
Note ClangRunner still doesn't use the vfs; that still needs work. I'm
just moving the NoArgs test over as a trivial test of the functionality.
The check stage now produces SemIR instructions to represent a `where`
clause. It still does not check types.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
We're trying to remain compatible with an environment where
`declare_symlink` is (apparently) disallowed.
`--allow_unresolved_symlinks=false` will prevent regressions.
Stemming from #4331, trying to break apart InstallPaths class comments
into three parts:
- Construction semantics, staying in the class comment
- Trying to refer to methods with more detailed documentation.
- Install prefix contents, now on `prefix_`
- Install structure, consolidating on `install_dirs`
For code refactoring, `driver()` and `prefix()` were only used by the
install paths test. Rather than having a comment not to use `prefix()`,
this instead extracts it out to a TestPeer model (which we have
elsewhere with `TypedNodesTestPeer`, thus my choice in approaches).
This risks diagnsotic formatting crashing, but I think we more
frequently see cases where it'd be interesting to know what diagnostics
were being delayed as part of the default sorting.
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is resolving a fuzz-discovered crash related to function suspends
and compile time bind indices. Although the crash originally came from
clearly invalid syntax (missing the `=` inside a `class` decl), the
syntax with a value should also be valid but has the same crash.
This approach disallows compile-time bindings in contexts that can
create ambiguous results, particularly class declarations. These are an
issue because a suspended function can have let declarations after it.
I'm allowing them in function bodies and interface scopes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Right now, there is no checking of `where` requirements. The result of a
where expression is just the type on the left-hand side. It does now
introduce `.Self` so that it is available in expressions on the
right-hand side, in addition to designators corresponding to the members
of type on the left-hand side. Note, though, that diagnostics could
still be improved significantly.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of separately constructing file information for `filegroup` and
`pkg_filegroup`, this instead creates a single structure which is used
to generate both. Additionally, I'm unifying the `llvm_link_data` and
`install_lib_data` targets (though the `llvm_link_data` target is
problematic for busyboxing, I don't think it can keep working as it does
right now).
Note I'm also stopping reuse of llvm's binary_alias. We need to be able
to symlink non-binary files, so I'm going to just share logic there.
(plus, I admit I find the name "binary_alias" confusing since it's not
an alias in bazel terms)
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Omit the `note: ` prefix and the snippet from the "in import" note that
precedes a diagnostic.
This makes our diagnostic output more closely match that of Clang and
GCC.
This makes something like `bazel run :toolchain -- clang -- -c test.cpp`
work, because that can be run in-process. Note that `bazel run
:toolchain -- clang -- test.cpp` still requires subprocessing, and does
not work.
Note, the vision here is that we are trying to align how clang and
carbon compile c++ code. This is work towards intertwining command
execution.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Because install_paths is not presently validated, and it's resolved
after the `SetWorkingDirForBazel` call, if a relative path is used with
bazel then it would fail silently. This starts making the driver share
install path errors, and starts changing how `//toolchain` launches
`carbon`.
Note the implementation is still brittle and will break with symlinks.
That's something I plan to address as part of busyboxing.
David Blaikie
Jon Ross-Perkins
Richard Smith
Céline Dedaj
Chandler Carruth
Geoff Romer
