Allow interleaving of STDOUT and STDERR check lines. Put STDOUT lines
after the line they're attached to, and STDERR lines before. If no
STDOUT check line is attached to any line, then put them all at the end
of the file instead.
This is intended to better handle the case where stdout contains
unreplaced mentions of line numbers, and also reflects that stdout is
typically a consequence of the test rather than commentary on it, so
placing it after the test seems likely to read better.
The crash occurred because of an alias target of a mixin. While
eventually, we should probably have some ability to alias mixins, this
isn't yet setup in the explorer and doesn't seem like a current
priority.
We got here because the mixin type checking made it far enough to not
reject this within the type checker, but the next step wasn't prepared
for this to come out of the type checker. The simplest fix seems to be
to reflect that it *can* escape the type checker, but still isn't (yet)
a valid alias target.
Test case added.
The intent of this change is that instead of paths looking like `explorer/testdata/foo/bar.carbon` (repo-relative), they're now just `bar.carbon` (local). The consequence is that paths should be a bit more durable in various environments, and just paths should be shorter and easier to read.
The explorer's prelude is an exception to this since it comes from data, rather than being the test target. Due to the change in approaches, it needs the regex again.
Uses #2829
Isolating test execution time (no build time included):
- Linux, `lit` test-per-file: Elapsed time: 28.214s, Critical Path: 13.97s
- Linux, `cc_test`-per-file: Elapsed time: 11.534s, Critical Path: 6.05s
- Linux, merged `cc_test` with 50 shards: Elapsed time: 11.677s, Critical Path: 11.17s
- Mac, `lit` test-per-file: Elapsed time: 295.686s, Critical Path: 20.00s
- Mac, `cc_test`-per-file: Elapsed time: 55.788s, Critical Path: 3.81s
- Mac, merged `cc_test` with 50 shards: Elapsed time: 16.269s, Critical Path: 7.54s
In GH actions:
- [Before](https://github.com/carbon-language/carbon-lang/actions/runs/4866602695/jobs/8678306144?pr=2799):
- test / test (ubuntu-22.04, fastbuild) (pull_request_target) Successful in 20m
- test / test (ubuntu-22.04, opt) (pull_request_target) Successful in 15m
- test / test (macos-12, fastbuild) (pull_request_target) Successful in 36m
- test / test (macos-12, opt) (pull_request_target) Successful in 21m
- [After](https://github.com/carbon-language/carbon-lang/actions/runs/4875154751/jobs/8697004066?pr=2811):
- test / test (ubuntu-22.04, fastbuild) (pull_request_target) Successful in 10m
- test / test (ubuntu-22.04, opt) (pull_request_target) Successful in 9m
- test / test (macos-12, fastbuild) (pull_request_target) Successful in 12m
- test / test (macos-12, opt) (pull_request_target) Successful in 9m
I'm still leaving a handful of `lit` tests to test end-to-end binary execution. This is why testdata directories are split (`lit` tests next to the `explorer` binary, the `cc_test`s next to `ParseAndExecute`).
Detect when evaluating an impl recursively tries to evaluate the same impl for the same or a more complex set of parameters.
In order to perform the check after we have tested that the type structure matches and before we check that constraints are recursively satisfied, argument deduction is extended to check structural matching properties earlier.
This requires us to separate match failures into two kinds: hard failures that produce errors that should never be swallowed, and soft failures such as a missing impl that lead us to merely discard an impl as a candidate. A flag has been added to `ImplScope` and `ArgumentDeduction` to specify whether soft failures should produce an error message or not.
First step towards permitting declarations within namespaces. Supports only functions within namespaces for now, with no way to call those functions except from within other such functions. Unqualified lookups within a function in a namespace look in that namespace first.
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Features:
* Add basic support for `impl` virtual methods (override virtual method)
* Error on invalid declaration for `impl` and `virtual`, covering simple use cases
* Add `abstract` fn parser-only support
Changes:
* Modify parser to handle new function specifiers, resolve conflicts
* Group `virtual_override` and `FN`, and group `impl_kind` and `IMPL` to avoid ambiguities with around `impl` token parsing
* Add new `VirtualOverride` enum for function declarations, and matching `virt_override() -> VirtualOverride` getter
* Update function declaration logic
Depends on #2462
Features:
* Add `virtual` virtual override keyword for functions
* Support `virtual` class methods using dynamic dispatch
Changes:
* Add `vtable` in `NominalClassType`,
* Add `NominalClassValue**` in class values pointing to descendant-most class
* Resolve virtual methods during member lookup
Limitations:
* Does not include yet `impl`, `abstract` virtual override keywords, or the complete logic for virtual function declaration
Depends on #2460
Relates to #1881
Relates to #2493
In particular, this means that a type can implement `ImplicitAs(Type)` and have values of that type behave like types.
This implies that `()` and `{}` are no longer types. They are now values whose type is the result of converting `()` or `{}` to type `Type`, as has been discussed recently and seems to be the supported direction. This fixes various cases where these types were previously mishandled.
There are lots of ways a declaration can be used before we have the information necessary to handle that use. Issue diagnostics for these.
Interleave declaration and type-checking of global declarations so that declaring a later declaration can depend on the results of type-checking an earlier one.
Incorporates tests added in #2266.
Fixes#1394, fixes#1395, fixes#1396.
Co-authored-by: pmqtt <51272730+pmqtt@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a simple script to merge stdout/stderr and put on labels. This is hidden to the RUN line using lit.cfg.py.
This is my solution to addressing how errors printed by the toolchain break sorting of stdout output; just put stdout first. We could also have toggles for interleaving output or such, which might help test whether we do it properly.
This also moves some previous-distributed replacement logic into lit_autoupdate_base.py: I think having that adjacent to lit.cfg.py is probably the better choice, and it reduces duplication in toolchain scripts. It happens here because I need to change the resulting commands to include the merge.
I've refactored the script in order to make it work in more contexts, which is why the delta is lost. I've actually refactored a significant amount with the intent of making the logic easier to understand, because I was also adjusting bits of it.
Some key notes:
- Removes the multi-pass update that was dealing with unfixed line numbers in explorer (I think the current script should work in one pass)
- Fixed explorer to handle multiple line numbers on the same line (turns out we can rely on local format for line numbers).
- Using execv instead of imports because making Python imports work in a setup like this feels like it's not worth it; only a nuisance.
- Adding __init__.py to satisfy mypy, which otherwise considers the lit_autoupdate.py scripts to be issues.
- Using py because I was thinking sh would be more platform-dependent. py should port better to Windows.
- Getting rid of [[ID#]] capture groups in the semantics-ir tests because with the autoupdate it's kind of moot (also, hard to autogenerate the pairs without relying on the %### value).
Note this does mean tests switch to more of a "make a change, see which tests change" setup. I don't know that that's a _bad_ thing though -- it's pretty much how tests are being written right now, which is why I went down this rabbit hole. It's a nuisance to make a change then _manually_ have to update a bunch of code.
My intent is to use this for to convert parse-tree tests to lit, but I wanted to do this with _existing_ tests first as a proof of concept and to make sure there's agreement.
On #2224 @zygoloid pointed out we needed --implicit-check-not to ensure we were correctly matching output. This is the standard way we're writing explorer tests, so I was looking at unifying our lit approaches.
This is one take on it, making more use of substitutions to bring various testing into alignment, as well as symlinks to avoid config skew (maybe I'll eventually figure out a better solution than symlinks).
Makes a couple small fixes in explorer to remove end-of-line whitespace on output.
* Replay changes from pre-force-push mixin branch
* Base MixinPseudoType off of the new InterfaceType
* Add more test cases.
Also removed an unnecessary check that would have already been
handled by the parser.
* WIP detect member clashes during mixing mixins
* Implement fuzzer changes
* Implement member name clash check when mixing mixins
* Modify parser and lexer for experimental mixin feature
* Add comments
* Update explorer/testdata/mixin/simple-mix-in-mixin.carbon
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
* Update explorer/testdata/mixin/use-mixin-method-in-class-method.carbon
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
* Make code review changes
Co-authored-by: josh11b <josh11b@users.noreply.github.com>
Richard Smith
Chandler Carruth
josh11b
Jon Ross-Perkins
Adrien Leravat
Geoff Romer
Darshal Shettyandjosh11b