Benefits:
* Provide a proper API for accessing lookup information.
* Make assumptions on whether the result is poisoned or not and how we
can use `InstId` explicit.
* Allow safely reusing the `InstId` value for pointing to the poisoning
entity for poisoned results (in a future PR).
* Consolidate `LookupNameInExactScopeResult`, `std::pair<SemIR::InstId,
bool>` and part of `LookupResult`.
Part of #4622.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
This change splits `NodeKind::IdentifierName` into separate node kinds
depending on whether the identifier is followed by parameters, and
similarly splits `NameQualifier` based on whether the qualifier has
parameters. This enables us to only push a pattern block when it's
actually needed, rather than "defensively" pushing one when it might be
needed.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Instead of stringifying types in the caller in some cases, add new types
to represent:
- `InstIdAsType`: an `InstId` diagnostic argument that represents a type
expression that should be included in the diagnostic
- `InstIdAsTypeOfExpr`: an `InstId` diagnostic argument that represents
an expression whose type should be included in the diagnostic
For these cases, we can produce more user-friendly descriptions of a
type than we can with a canonicalized `TypeId`. Add comments to
discourage using `TypeId` diagnostic arguments when one of the above can
be used, and move over existing uses where it's straightforward to do
so.
Move type stringification code to its own files and out of `SemIR::File`
to make `File` smaller and to further discourage the direct use of the
stringification logic.
Also update type printing to include the `` ` `` delimiters surrounding
the type. The intent is that we will eventually want to include other
information when formatting a type, like Clang does when printing a
typedef (`'string' (aka 'std::basic_string<char>')`), and such
formatting requires that the diagnostic machinery produces the `` ` ``s
itself.
There are a couple of cases where we really want to format valid Carbon
type syntax directly into a diagnostic, rather than an `aka` or similar,
because the diagnostic text includes part of the type itself, for
example: ``"consider using `partial {0}`"``. For such cases, a `Raw`
form of the diagnostic argument types is added: `TypeIdAsRawType` and
`InstIdAsRawType`. In principle we could instead use ``"consider using
`partial {0:raw}`"``, but our diagnostic machinery isn't set up for
that.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Right now, there is no checking of `where` requirements. The result of a
where expression is just the type on the left-hand side. It does now
introduce `.Self` so that it is available in expressions on the
right-hand side, in addition to designators corresponding to the members
of type on the left-hand side. Note, though, that diagnostics could
still be improved significantly.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
As discussed in toolchain meeting, we want to avoid overloading the
meaning of "instance", and "specific" was the best name we found. It's a
little unorthodox and inventive, but hopefully over time will become as
unsurprising as the term "generic" is.
This is for consistency with #4120. Similar to that, we can use
overloads on the typed NodeId rather than individually named handlers.
There isn't the same caller benefit here though, since the calls from
check.cpp are already boilerplate.
We can't use the instruction from the generic directly, because it
doesn't have the right constant value. Instead add an instruction that
models the transition from the constant value in the generic to the
constant value in the generic instance.
Also start associating the self generic instance with unqualified
lookups that find results in an enclosing generic, so that we track the
information necessary to create the new instruction.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
I'm trying to increase the distinction between BuiltinKind and
BuiltinFunctionKind. BuiltinKind is for instructions,
BuiltinFunctionKind is for function definitions. To get to this point,
I'm doing a few changes:
- BuiltinKind -> BuiltinInstKind
- builtin_kind.* -> builtin_inst_kind.*: filename consistency
- Builtin -> BuiltinInst: mainly for consistency with the above
- Builtin::builtin_kind -> BuiltinInst::builtin_inst_kind: somewhat
repetitive but seems like a consistent edit
- Function::builtin_kind -> Function::builtin_function_kind: seems a
useful distinction
I'm leaving alone things like (and mentioning in case there's a desire
for more renames):
- InstId::BuiltinError, InstId::ForBuiltin: these I think are more
apparent because they're directly associated with Inst.
- GetBuiltinICmpPredicate in lowering: maybe builtin function handling
should be in its own file, but these local names don't feel problematic
to me.
- GetBuiltinType, BuildBuiltinValueRepr, PerformBuiltinIntComparison:
similar to the above, names don't feel too problematic
Require types into which qualified lookup is performed to be completely
defined. Eventually this will trigger substitution into the definition
for generic types.
For each generic, build a list of instructions describing the
computations we need to do when resolving an instance of the generic:
this is a list of the instance-specific constants and types that the
generic uses. Another way of viewing this list is as a block of Carbon
SemIR code that is evaluated in order to form an instance of the generic
-- this is referenced in the code as the "eval block" for the generic.
For each instruction in the generic whose type or value is a symbolic
constant, replace that type or constant value with a symbolic reference
that says "to find the actual type or value, look at index N in the list
of values for the generic instance".
For an instruction with a symbolic constant value, we can just add that
instruction to our list. For an instruction with a symbolic constant
type, however, we may not have a corresponding instruction computing the
type within the generic and may need to build a new instruction, but
will reuse one where possible. In the case where we build a new
instruction, we use the existing substitution code to build the type
within the eval block.
For now, this transformation is only done in the declaration region of
the generic, not in the definition region. Also, we map back from the
symbolic references to the underlying constant value in a few places
where we will eventually need to do a lookup into a generic instance, in
order to avoid regressing the tests.
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Trying to conform with #4009. Changes SemIR::LocIdAndInst construction
to root out struct init cases with AddInst and related functions. I'm
using templating of AddInst functions in order to avoid `AddInst(loc_id,
InstName{...})` and instead have `AddInst<InstName>(loc_id, {...})` with
I think similar readability results. There are a couple cases where inst
construction is templated and so designated initializers couldn't be
used, so this may be better for those in particular due to the extra
type enforcement.
This probably doesn't clean up every last case, but I was trying to get
the bulk at once without bleeding over into less related changes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Previously we did some of this in decl_name_stack and some of it in the
callers of decl_name_stack. Factor out a single place to pop a name and
its optional following parameters.
Part of making this behavior consistent is that we now track whether an
implicit parameter list was present or absent rather than mapping an
absent list to `InstBlockId::Empty`. This improves our redeclaration
checking and the precision of some diagnostics.
Parse the name of a declaration as a sequence of `NameQualifier`s --
which have a name, possibly parameters, and a trailing period --
followed by a name and possibly parameters. This prepares us for parsing
declarations of members of generic classes and similar cases, but
actually supporting such member redeclarations is left to a future
change.
We previously required functions to have parameters, but no longer do,
following the direction of #3848. Cases like namespaces that can't
actually have parameters are now diagnosed in check instead of in parse.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This change implements the check behavior for the arrow operator.
`ptr->Foo()` is rewritten as `(*ptr).Foo()` and `ptr->(X.y)` is
rewritten as `(*ptr).(X.y)`
On the parsing side, we treat `a.(b)` as a member access whose second
operand is a `ParenExpr` rather than a `MemberName`. A new node category
is added for the union of `MemberName` and `ParenExpr` to support this.
Checking is mostly reusing the same pieces we already have for simple
member access. Compound member access is in most ways a simplified form
of simple member access because it doesn't need to do any lookup.
The member access logic is fairly large, and will be growing with the
addition of impl lookup. Factor it out to separate the logic for dealing
with handling the parse node and updating the node stack from the logic
that checks and builds the member access expression.
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Follow the existing support for classes.
None of this is especially useful until other features land: we don't
yet have any use for defining methods of an interface out of line,
because we don't support `default` or `final` interface methods, and we
don't have impl lookup, so referring to an interface member is also not
especially useful. But this is a nice piece to factor out that's a
prerequisite for effectively testing other interface features.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
I believe this PR is sufficient to pull in all current class features,
including the current bits of inheritance which have been implemented.
Because a class declaration can reference its own type, this creates an
incomplete type prior to constant loading.
Right now, the object representation is imported proactively, but
individual fields are left as ImportRefUnused. This means that member
functions and similar will only be imported if called.
This also adjusts how function parameters are being handled, to match
the expectations of Self param structure.
When formatting, I'm starting to look into constants. Otherwise we get
"unexpected instref".
Overall, there are a few things that may be worth further discussion:
- The lack of a constant corresponding to the ClassType on ClassDecl is
inconvenient -- I'd like to see how zygoloid feels about trying to
restructure this. i.e., I'm setting a constant in order to be able to
track things down later, it'd be nice if the normal IR did this simply
for consistency, or if we were able to combine these rather than having
separate instructions.
- Should we shift the parse node tracking further, and go with a setup
wherein imports can embed import references into that? e.g., negative
values go to another array which includes a ImportIRId for printing
diagnostics, replacing the invalid NodeId.
- Can the formatter switch to a more general scan of instructions for
naming, to eliminate the ImportRef constant approach added here?
- GetExprValueForLookupResult special-casing instructions felt
surprising, I might see if there's a way to restructure to avoid that.
But I think these issues are things that can be separated out.
Note we may also want to do this with NameId, maybe some other things,
but the TypeId use is pretty broad and repetitive -- I thought I'd start
with it first.
Consume the components of the `impl` declaration, and set up scopes for
the child elements. We don't yet build a representation for the impl
itself.
Also, add an interface type value. This is necessary so that we have a
value for the expression on the right-hand side of `as` in an `impl`.
The parse nodes are still tracked as part of the same value store
interface in order to ensure parity, but they're split out from Inst
itself in order to reduce the size of Inst -- the expectation is that
they don't need to be passed around quite as much.
This change doesn't actually reduce the passing very much, although
there are hints of it: AddInstAndPush doesn't typically need a separate
parse node from the one on the Inst itself, for example. In a couple
spots I changed code to rely a little more on the InstId until the
ParseNode is needed, but it's very low hanging fruit where done. I think
convert could do more to not eagerly fetch the parse node before its
use, but more cleanup felt it would be easier to handle separately. I'm
currently viewing this as making such cleanup _possible_ rather than
executing on it up-front.
But also, I want to make sure there's a consensus to head in this
direction before pulling the trigger. We speculated that this would
result in the parse node being passed around less, and I do think that's
the case, although it's a bit fuzzy in the change.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
This sets things up to use `bazel` to run `clang-tidy` using
https://github.com/erenon/bazel_clang_tidy.
I'm fixing issues outside of explorer, and disabling clang-tidy for
targets in explorer that have legacy issues. I was going to disable
clang-tidy for targets in explorer such as interpreter anyways, because
they're slow to parse, and just extended that to the currently failing
targets.
Goal is to increase type safety, though more work needs to be done (see
added TODOs).
Note that, after this change, check handlers corresponding to deleted
parse node kinds will no longer compile.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
The goal here is to make the representation more uniform so that we can
start adding different kinds of binding -- checked generic bindings and
template bindings -- across both function parameters and local `let`
declarations.
With this change, the entry in the parameter list for the function is
the name binding, not the Param itself, which has some ripple effects on
consumers of that list that want to access the parameter rather than the
binding. This is expected to change again when we start adding more of
the pattern matching SemIR, but this seems good enough for now.
This builds out a little infrastructure for one name scope to `extend`
another. We'll need more refinement here to cover other cases, but this
should provide some foundation for that future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Boaz Brickner
Geoff Romer
Jon Ross-Perkins
David Blaikie
Brymer Meneses
CJ Johnson