In handle_class and handle_interface we assign TypeType, so is more
consistent. I think this had been missed because we haven't really been
using these declarations (historically, declarations didn't have a
type). It seems not to significantly affect output at present, although
I found this while trying to change merge behavior.
Right now, debugging a crash means errs never flushes: it's buffered in
the string. As a consequence, -v doesn't print anything. By stopping the
output capture in --dump_output, it prints directly for debugging.
The driver now looks for all files under core/prelude/ and considers
them all to be part of the prelude. The driver also now only processes
the prelude in `--phase=check` and later, when it would actually be
imported.
With that done, add a simple `carbon_binary` build rule and use it to
build the example in `//examples`. This should cause the example to be
built as part of our continuous integration.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
This doesn't actually track whether a declaration is `extern`. It does,
however:
- Factor out and expand merge support for classes, sharing handling with
functions.
- This makes the ClassRedefinition diagnostic redundant, as the
redeclaration checking overlaps.
- Add partial `extern` handling to class handling; just some
verifications of correct use.
- Factor out `extern` on member handling for sharing with `fn`.
- Fixes a bug in import_ref where a class's definition_id wasn't
assigned when defining.
This changes how a redefinition is handled (replaced, rather than
merged). I don't know whether that's ideal, but I think it results in
easy-to-understand consequences, and it's more consistent with how `fn`
works.
There's enough work here that this felt like a decent cut point,
particularly as the amount of work to actually add `extern` tracking
will be significant.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Per offline discussion with chandlerc and jonmeow, use different
builtins for signed versus unsigned integer ops instead of looking at
the type. In this commit, the arithmetic builtins (add, sub, negate,
mul, div, mod) are split. I'll apply the same change to comparisons and
to right shift in separate PRs.
This is just to be able to directly run the driver (e.g., `bazel run
//toolchain/driver:carbon compile foo.carbon`); it shouldn't affect
anything else.
Allow an explicit `as` conversion to convert between adapters and their
adapted types. Also make the value representation of an adapter be the
same as the value representation of the adapted type so that the
conversion is always possible.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
This is mainly to prevent a crash. We should typically have a valid
location, but in cases of bugs I think this is better than a simple
check-failure (namely, provides the diagnostic to give better context of
why the diagnostic location looks bad). I also think we might have more
invalid locations in the future.
Note I ran into this because we weren't setting the definition_id for a
class in import_ref; I think this made it much easier to examine.
This is something I noticed working on
https://github.com/carbon-language/carbon-lang/pull/3884; I think we
have more functions named Diagnose* at present than Emit* or Report*, so
just trying to consolidate. Note a couple Diagnose* functions do a
little more validation, but maybe those should actually be renamed away
(zygoloid had mentioned wanting to generally split out diagnostics to
their own function, and then we'd have it be a more common pattern).
Particularly with the changes to file_test, I believe it's faster to use
the current build mode than to rebuild in opt. This was particularly
noticeable while working on my laptop...
Use the complete location of the `as` conversion rather than the
location of the first operand, so diagnostics referring to the result
point at the whole thing.
This is coming out of advice from
https://securityscorecards.dev/viewer/?uri=github.com/carbon-language/carbon-lang
Updates action versions and pins by checksum. This is something we
already do in other places, and doing it with actions just seems
consistent.
Trying to add token permissions at the same time.
step-security/harden-runner is being set up to monitor network traffic
for actions, with the idea that we'd set it to block unexpected traffic
in the future.
Note, https://app.stepsecurity.io/secureworkflow generates the pinned
checksums and adds the harden-runner. In some cases it added token
permissions, but we have a couple it doesn't recognize (`gh` executions,
other custom commands, jlumbroso/free-disk-space, reviewdog/action-setup
as examples) so I'm trying to guess my best.
Because these are workflows, testing is limited.
Note the "Cannot implicitly convert from `C*` to `C*`." error is what I
would aim to fix next. This is what had spawned the discussion of
whether to use name scopes to merge difficult-to-relate names. But I
think that's going to take more substantially more work, so the small
improvement for now.
Move completeness check to the point where the function is defined or
first called. This means we also defer deciding whether the function has
a return slot until that point. Instead of storing a return slot per
function, store the location of the return storage, which may or may not
be used, and compute and store a separate flag saying whether to use it
at the point of first use or definition.
This is the final piece in supporting simple `Make` functions in classes
as a replacement for constructors.
The `file_test` layer still adds it to the VFS and filters it from the
dump output, but the driver now injects it into the compilation unites
depending on the `--import-prelude` file (enabled by default).
This doesn't address improvements to how we find the prelude code, just
sinking the needed logic into the driver itself.
While most of the examples in our tests are made clear by the code
snippet, sometimes that's not the case. This makes it more clear when
the implicit `Main` package is used for example. I added this because I
got an error message without any source code to show in the snippet
(importing the prelude for example) and this makes the error much more
understandable.
This largely reproduces the upstream one, but has a few advantages:
1) It initializes LLVM which can be important if we use the backends.
2) It parses commandline flags with Abseil allowing the use of Abseil
flags in benchmarks.
3) It flips the default for tabular display of results which we use
pretty heavily.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
`i32` is retained as a special case for now, for bootstrapping purposes,
and maps to `BuiltinIntType`, which is distinct from `Core.Int(32)`.
This will be removed later once we support `Core.BigInt`.
For now this provides both the `iN` types and also the builtins to
support `Core.Int(N)`. The intent is that we'll change the `iN` support
to rewrite to calls here when we do that for the other type literals and
type keywords.
No conversions between integer types are supported yet, and all literals
are of type `i32`, so we can't actually form values of any of these new
types.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
This allows impl lookup to find such impls.
Eventually we'll want to do this more lazily, and filter to the relevant
subset of `impl`s needed for a query. But for simplicity, for now just
import all `impl`s.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Note, my instinct is that `Float(dyn_size)` should be invalid. However,
I think the constant evaluation doesn't result in the call being
evaluated in eval.cpp when the size is non-constant. I think I could get
an error for symbolic phase calls, but that seems a little less
interesting already. Long-term maybe we want a way to mark functions as
_must_ be evaluated during constant phase?
Also, I think there may be a bug with literal value parse node
locations, I should be able to point at the position of `arg_ids[0]` but
it's missing a line number so I point at `loc` instead.
Split apart the interfaces into separate libraries by theme. We don't
yet have a way to re-export them, so for now change importers to use the
fine-grained names.
This is almost certainly not how we'll want these to be organized, and
if the examples/ directory is kept it should have BUILD files. But this
at least lets me park these files somewhere that's more global than my
own checkout.
Due to my workflow, I prefer to run `pre-commit` locally when I forget
to after an amend. While reviewdog can be helpful in the UI, it's mostly
making me mark comments as resolved as part of re-pushing. Rather than
continuing with this, maybe opting out is best?
The expected parse tree size is validated for valid parse trees, which
is possible even if lex encounters an error. In that case, we were
missing recovery tokens, resulting in a crash. AddToken should be the
only place we call `token_infos_.push_back`.
Adds ImportIRId::ApiForImpl to reserve a specific slot for the `api`
import, so that the code can trivially determine whether an import is
from the same library. This is then used for merging function
declarations, because the rules for redeclarations in the same library
slightly differ as compared to other imports (note they're also not
identical to same-file rules).
The main thing this leaves from the recent #3762 is verifying that
entities forward declared in the `impl` file are also defined, but
that's not in-scope for merging; it's moreso post-checking validation.
Note, a lot of our `invalid <entity> ID` comments in ids.h were
incorrectly copy-pasted, so I've cut `<entity>`.
Instead of special-casing tokens starting with `r`, lex them as normal
identifiers, and add a special case to `#` handling to detect if the
previous token was an `r` identifier.
This roughly doubles the time to lex a raw identifier, because we do two
hash table insertions rather than one, and probably slightly slows down
lexing string literals starting with `#`, but should remove the 2%
overhead to identifier lexing from the previous approach.
Noticed an unexpected format change in #3850, it's probably because
pre-commit needs to explicitly include def files. The def change here is
a consequence of `pre-commit run -a` with this change.
Instead of attempting to reconstruct this based on the properties of the
target scope of the declaration name, check whether the enclosing scope
of the inner deferred definition scope is the enclosing deferred
definition scope.
Also add verbose logging to the deferred definition handling code to
make it easier to see when we switch between handling the regular parse
nodes and the deferred function bodies.
This is achieving a similar goal as #3849, using placeholders instead of
an ambiguous start node to clarify structure and incrementally simplify
checking. The benefit isn't quite as big here because both paths are
structs, and so checking is more consistent than paren exprs versus
tuples. But I think this removes the only other multi-purpose parse
node.
This uses StructLiteral/StructTypeLiteral naming, reflecting equivalent
SemIR naming. Note, I would lean towards renaming StructLiteral to
StructValueLiteral, but I think consistency in naming takes precedence.
Any renames of StructLiteral might be better in a separate PR.
StructFieldType/StructFieldValue -> StructTypeField/StructField is
trying to making the reading more consistent with
StructTypeLiteral/StructLiteral. SemIR has StructTypeField but not a
value equivalent.
I've been thinking about this since we decided to add placeholders in
the parse tree. This allows a clearer division of work in check
handling, where we were doing work for ExprOpenParen that's only
necessary for tuples (splitting/renaming handle_paren.cpp accordingly).
Jon Ross-Perkins
Richard Smith
Pablo Paglilla
Pablo Paglilla
dependabot[bot]
Jordan Rupprecht
Chandler Carruth
