This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
Type check named constraint decls and definitions. We don't correctly
error if you put a `fn` inside them. There is no support for `require`
or `alias` yet, so there's nothing useful you can do with them yet.
We have attempted to share code between `interface` and `constraint` as
they are quite similar. First by splitting out some of
handle_interface.cpp to a separate file. Second by sharing some code
paths when you want a facet type from either one, as they both turn into
a facet type.
This proposal removes the definition of the term "value binding" as a
primitive
category conversion from reference to value, replacing it with the term
"value
acquisition". The other meaning of "value binding", a binding declared
by a
value binding pattern, is unchanged.
`const` doesn't mean much on the type of a value expression; it's valid
to remove it because we can't perform modifications to a const value
regardless.
We already allowed most of this, but only as part of adapter conversion
rather than in general, and we didn't previously allow it when the
source of the conversion was a reference expression.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
A `final impl` can have a symbolic witness, but that witness is still
final. Using "final" here per discussion on
[#generics-and-templates](https://discord.com/channels/655572317891461132/941071822756143115/1428851511672312120).
I'm also changing the variant a little because `concrete_witness` was
only called when `has_concrete_value` was true, so it can be more
careful about its contract. Having a more explicit `None` also
simplifies `has_value`. I think it doesn't change the overall cost much
past that.
Switch to using a pair of `MaybeUnformed(T)` and a `bool` as the normal
representation for `Optional(T)`. When `T` is a pointer type, add a
customized representation that uses `MaybeUnformed(T*)`, with a null
representation used for absent values.
This demonstrates that we don't diagnose when trying to call a base
class private function when we refer to the function from a derived
class without qualifications.
Demo: https://godbolt.org/z/vbWs1P915
This would save space for every `EntityName` that is not an imported C++
global variable.
C++ global variables include static data members.
Created `CppGlobalVarId`, `CppGlobalVarKey` and `CppGlobalVar` to allow
having `CanonicalValueStore` that maps `EntityNameId` (which is in
`CppGlobalVarKey` and `CppGlobalVar`) to `ClangDeclId` (which is also in
`CppGlobalVar`).
This is similar to `ClangDeclId`, `ClangDeclKey` and `ClangDecl` .
Rather than assume reallocations can occur, we've switched to providing
stable references, so simplify related code.
Only removing the comment in `BuildGeneric`, no refactoring, because I
don't feel a refactoring would be a significant improvement.
This demonstrates two issues:
1. It seems like we wrongly treat private static data members the same
way we treat protected and allow access to them from within derived
classes member functions.
2. Calling instance member functions of a base C++ class using a derived
class as self (no implicit upcast) is not yet supported. This isn't
related to access control, but prevents us from testing some access
control use cases.
Part of #5859.
SymbolicBindingType evaluates to the type component of a symbolic facet
value (a type/witnesses pair), and that symbolic facet value has its
constant value replaced by a specific. That specific can provide a
FacetValue, in which case it just evaluates to that FacetValue's type
component. It can provide a BindSymbolicName of another binding, in
which case it points to that entity instead and awaits a further
specific. Currently the code only handles these two cases, and they
match the behaviour of the evaluation of FacetAccessType itself.
However FacetAccessType evaluation also handles cases beyond these, as
there are other instructions that occur as facet values, such as
ImplWitnessAccess, when accessing an associated constant of an interface
that has a facet type as its type.
Currently eval then crashes in this scenario. Instead of furthering to
reproduce the contents of FacetAccessType's evaluation, defer to calling
the `EvalConstantInst()` overload for it when evaluating
SymbolicBindingType against a new value from a specific. This means
SymbolicBindingType can evaluate back into a FacetAccessType, when it
was originally a FacetAccessType(BindSymbolicName) and becomes
FacetAccessType(ImplWitnessAccess) through a specific.
This comes with a test that crashed in eval before this change.
In preparation for modeling `Optional(T*)` as a null pointer value.
With this PR, pointers remain non-nullable, but `MaybeUnformed(T*)` has
a particular unformed state that has the same representation as a C++
null pointer, which is accessible and detectable via builtins.
Implemented by generalizing the reference type support for parameters
and return values to other use cases.
The changes to the `method.carbon` test are due to to supporting the
reference types but not supporting the necessary conversions.
C++ Interop Demo:
```c++
// global.h
struct C {
int member = 0;
int& member_ref = member;
};
extern C& global;
```
```c++
// global.cpp
#include "global.h"
static C static_c;
C& global= static_c;
```
```carbon
// main.carbon
library "Main";
import Core library "io";
import Cpp library "global.h";
fn Run() -> i32 {
Core.Print(Cpp.global->member);
++(*Cpp.global->member_ref);
Core.Print(Cpp.global->member);
++(*Cpp.global->member_ref);
Core.Print(Cpp.global->member);
return 0;
}
```
```shell
$ clang++ -stdlib=libc++ -c global.cpp
$ bazel build toolchain:carbon && bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link global.o main.o --output=demo
$ ./demo
0
1
2
```
**Without this change**:
```shell
main.carbon:10:14: error: semantics TODO: `Unsupported: var type: C &`
Core.Print(Cpp.global->member);
^~~~~~~~~~
main.carbon:10:14: note: in `Cpp` name lookup for `global`
Core.Print(Cpp.global->member);
^~~~~~~~~~
```
Part of #6006 and #6186.
The tests are almost identical and test the same logic so basically
duplicated.
The extra coverage that was in `struct.carbon` is added to
`class.carbon`.
One basic test in `struct.carbon` was left just to make sure `struct` is
supported.
Part of #5150.
This requires changing `ReturnSlotPattern` and `OutParamPattern`
definitions to use untyped node id, so they can have any associated
node.
Follow up of #5197.
Part of #5064.
A SymbolicBindingType is going to only have EntityNameId as its field,
and we will use the ScopeStack to use that to find a facet. The
ScopeStack is a check/ thing, so this won't be possible in
SemIR::TypeIterator. And TypeStructure throws away the details for
symbolic types anyways. So this drops the TODO and returns the
EntityName from TypeIterator for any future user who would want it in
check/.
When we do member access `x.F` we attempt to look into the type of `x`
for `F`. If `x` is a facet, we look at its FacetType to find `F`. We
want `facet` and `facet as type` expressions to be generally treated as
equivalent, so we need to get at the "canonical facet value" of `x` in
order to look into its type. Add a new operation that allows us to
preserve the non-canonical `base_id` in the member access for
diagnostics if no conversion to a canonical facet value was needed.
David Blaikie
Dana Jansens
Geoff Romer
Richard Smithandjosh11b
Boaz Brickner
Jon Ross-Perkins
Ivana Ivanovska