This does some more work to the run_clang_tidy.py wrapper script, and runs an example pass.
"again" because it's really the proto fuzzer changes that broke it, it had been working before.
"mostly" because there's still an issue within the proto fuzzer that it can't find "port/protobuf.h", i.e. https://github.com/google/libprotobuf-mutator/tree/master/port, but I'm still hesitant to add an include path there.
We don't seem to have any need for `TypeOf*Type` types, and having them introduces the temptation to use them during type-checking, which would lead to types having different behavior when their type-of-type is `Type` versus when it's a more precise type. Remove these types for now.
If we later decide that we want each type literal to have a unique type, as we do for value literals, we can introduce a single value kind for that rather than one for each kind of type.
No changes to `TypeOfMemberName`, `TypeOfParameterizedEntityName`, and `TypeOfMixinPseudoType`, which are placeholders, not real types.
Provides a documented cadence, publishing target, and template for Code of Conduct and moderation transparency reports.
Based on the initial proposal draft from @CelineausBerlin.
Co-authored-by: Céline Dedaj <CelineausBerlin@users.noreply.github.com>
In particular, if we find the name of an interface after `is`, it should
be exapnded to a constraint, including any implied constraints such as
extended interfaces, rather than forming a constraint requiring only
that interface in isolation.
Add checking that a type only satisfies a constraint if it satisfies all of that constraint's equality and rewrite constraints.
Enforce the rule that `=` must be used in impls when specifying associated constant values rather than `==`.
Turn off the pre-#2173 single-step equality behavior. This is getting somewhat ahead of the approved design, but it's a one-line change to restore the old behavior.
Fix `CARBON_CHECK` to handle top-level `,`s in its argument, such as may happen in template argument lists, as this change introduces such a check.
llvm::InitLLVM starts getting stacks on assertion errors. Tieing errs to outs causes outs to be flushed when errs is used (avoiding munging out incompletely flushed output).
LLVM_SYMBOLIZER_PATH is required if `llvm-symbolizer` isn't in the developer's PATH. This sets it via bazel instead of having a developer handle it. I noticed this because the apt install of clang doesn't put llvm-symbolizer in the PATH.
I'd like to make this the default without putting it everywhere, but I don't see a way to do this intrinsically through [the toolchain](https://bazel.build/docs/cc-toolchain-config-reference), and the [rules_cc/defs.bzl](https://github.com/bazelbuild/rules_cc/blob/main/cc/defs.bzl) remains a thin wrapper around the native cc_binary.
Since I'm adding another env, it seems undesirable to have the macos asan workaround separate. As a consequence, this merges it in. Note bazel doesn't support merging a dict and a select, so it's also necessary to have the two env vars at least mildly aware there's something up (and this could get worse if we end up having more selects).
This had already hit one bug in LLVM, and now I've hit another:
https://github.com/llvm/llvm-project/issues/58385
Since this isn't specific to a config, and it seems to be a clear sign
that this isn't the best tested path, let's just drop to the more fully
tested flags. Probably should have done this rather than the more
targeted workaround last time...
This switch is being done in order to make it easier to update tests when the parse tree structure changes. I've been spending a lot of time doing such updates as part of refactoring the parse tree, and I expect more, so that's really at the root of all the refactoring I've been doing to lit updates.
There are lots of ways a declaration can be used before we have the information necessary to handle that use. Issue diagnostics for these.
Interleave declaration and type-checking of global declarations so that declaring a later declaration can depend on the results of type-checking an earlier one.
Incorporates tests added in #2266.
Fixes#1394, fixes#1395, fixes#1396.
Co-authored-by: pmqtt <51272730+pmqtt@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds a simple script to merge stdout/stderr and put on labels. This is hidden to the RUN line using lit.cfg.py.
This is my solution to addressing how errors printed by the toolchain break sorting of stdout output; just put stdout first. We could also have toggles for interleaving output or such, which might help test whether we do it properly.
This also moves some previous-distributed replacement logic into lit_autoupdate_base.py: I think having that adjacent to lit.cfg.py is probably the better choice, and it reduces duplication in toolchain scripts. It happens here because I need to change the resulting commands to include the merge.
This change left a test broken and removed a fair amount of test coverage for unrelated features, and after further discussion it's not clear that this is the direction we want to go in.
This reverts commit 6cf2272bbe.
I've refactored the script in order to make it work in more contexts, which is why the delta is lost. I've actually refactored a significant amount with the intent of making the logic easier to understand, because I was also adjusting bits of it.
Some key notes:
- Removes the multi-pass update that was dealing with unfixed line numbers in explorer (I think the current script should work in one pass)
- Fixed explorer to handle multiple line numbers on the same line (turns out we can rely on local format for line numbers).
- Using execv instead of imports because making Python imports work in a setup like this feels like it's not worth it; only a nuisance.
- Adding __init__.py to satisfy mypy, which otherwise considers the lit_autoupdate.py scripts to be issues.
- Using py because I was thinking sh would be more platform-dependent. py should port better to Windows.
- Getting rid of [[ID#]] capture groups in the semantics-ir tests because with the autoupdate it's kind of moot (also, hard to autogenerate the pairs without relying on the %### value).
Note this does mean tests switch to more of a "make a change, see which tests change" setup. I don't know that that's a _bad_ thing though -- it's pretty much how tests are being written right now, which is why I went down this rabbit hole. It's a nuisance to make a change then _manually_ have to update a bunch of code.
My intent is to use this for to convert parse-tree tests to lit, but I wanted to do this with _existing_ tests first as a proof of concept and to make sure there's agreement.
Implements basic support for rewrite constraints as proposed in #2173.
Support for associated constants and complex constraints in general is also made more robust: argument deduction now properly computes and substitutes witnesses, and interface declarations track a more correct description of the constraint that they introduce than the one we previously built.
Change explorer's handling of witnesses to track them wherever possible. Associated constant support needs witnesses to be available much more pervasively.
The main changes here are:
- `Substitute` now takes a set of bindings covering both `Value`s for `GenericBinding`s and `Witness`es for `ImplBinding`s, and substitutes both.
- Witnesses are now tracked within `ConstraintType`s. The `.Self` type has an `ImplBinding` that self-references from parts of the constraint to other parts of the constraint can use to access the witness for the constraint.
- The constraint type for an `impl` and for a `GenericBinding` are now stored in pre-substituted form, with references to the actual constrained type rather than symbolic references to `.Self`. This results in minor changes in diagnostic text.
Argument deduction still performs substitutions without remapping witnesses.
On #2224 @zygoloid pointed out we needed --implicit-check-not to ensure we were correctly matching output. This is the standard way we're writing explorer tests, so I was looking at unifying our lit approaches.
This is one take on it, making more use of substitutions to bring various testing into alignment, as well as symlinks to avoid config skew (maybe I'll eventually figure out a better solution than symlinks).
Makes a couple small fixes in explorer to remove end-of-line whitespace on output.
1) toolchain and explorer use the same working dir logic, share it
2) explorer's carbon.cpp and main_bin.cpp use the same relative path logic, share it
3) You can append a longer path in one call with the right kind of iterator
4) Fix what's maybe a bug in passing `relative_prelude_path.str()` to `cl::init`
5) Collapse Main and ExplorerMain to avoid passing more parameters between
The only usage of this set is to include this list in trace output when
tracing type-checking of patterns. But that in turn seems arbitrary and
not useful.
Previously explorer worked under `bazel run` but not when run directly, because it was finding the prelude relative to the current working directory. Now it looks for it relative to the location of the binary, so it works both when run directly and when run with `bazel run`.
Instead of forming a `SymbolicWitness` that contains an `Expression` when we can't directly resolve a witness to an `impl`, form different kinds of `Witness` values for the various situations:
- A `BindingWitness` witnesses that a type implements a constraint by reference to an `ImplBinding`.
- A `ConstraintWitness` witnesses that a type implements a constraint by reference to witnesses for each of the impl constraints within the constraint.
- A `ConstraintImplWitness` witnesses that a type implements a constraint by reference to a larger constraint which contains that constraint as an impl constraint.
Remove `SymbolicWitness` values and `InstantiateImpl` expressions, which are now unused. In order to remove the final usage of `SymbolicWitness`, I fixed a TODO to give `Self` the proper type within an interface declaration. I don't think this is an observable change.
No functional change intended.
Previously we used an expression in some places and a `Witness` values in others. The eventual goal is to make `Witness` values behave like other symbolic values such as `NominalClassType`, but the first step is to consistently treat them like values rather than expressions.
No functionality change intended.
This builds on semantics-ir lit support added by #2222
The googletest setup was feeling cumbersome, especially as I'm thinking about how to add more testing: I feel like I'm wrestling with the infrastructure.
The `[[ID1]]` and so on in tests is one advantage of switching: it's easier to do matching of IDs for verification. This is also more agnostic about the numbers than before, something which I'm concerned will be important as I think about builtins.
To explain my builtins thought, I think that needs to be another SemanticsIR with basically names pointing at builtin things. But this (a) creates multiple SemanticsIRs, which would confuse the current singleton approach and (b) starts creating more fluctuation for IDs, potentially impacting the numbers used (also, chandlerc's suggested pointers for some use-cases).
Overall it felt like I was heading towards a situation with googletest where writing the tests would be really difficult, and it was adding to my hesitance to write more code in the toolchain. I'm hoping this acts as a simplification.
Note, the "cp" commit has some incremental changes to googletest that I'd considered for making it easier to add matchers, but ultimately I ended up with this outcome.
run_clang_tidy.py (the clang-tools-extras version) is parallel so should be feasible to work with. I'm trying to codify this mainly because finding out the right invocation can be difficult.
This fixes some loading of re2 and proto that's started to become an issue.
It's hard to see actual issues because of the identifier length warning being turned off in #2244, and just general issue creep. There may be more fixes to do but this should still be an improvement.
Key rewrite points:
- Making more use of apt now, since we no longer need `brew` for llvm on Linux.
- Gets ahead of issues with brew's llvm 15 on Linux.
- Clear list of commands for a typical setup.
- Less verbose text about various tool options (I think this was just too much).
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
The config.yaml doesn't seem to be getting seen. Judging by https://github.com/carbon-language/carbon-lang/tree/trunk/.github/ISSUE_TEMPLATE ("Customize the issue creation experience with a config.yml file.") I think yaml is allowed for a lot of things (including the templates) but not config.yml.
I'm renaming other files for consistency.
Jon Ross-Perkins
Richard Smith
Chandler CarruthandCéline Dedaj
Kareem Ergawyandergawy
Adrien Leravat