Commit Graph
863 Commits
Author SHA1 Message Date
Jon Ross-Perkins 57ef976802 Move dumping into the phase factory functions (#5747)
By moving dumping, we can have dumping occur before verification that
might CHECK-fail (e.g. parse tree and llvm IR verification).

I'm dropping vlogging of raw semir. It was only done when dumping, so
`-v` would print zero copies and `-v --dump-raw-sem-ir` would print two
copies. The lack of complaints about this suggests it's not needed.

I'm making a small change to drop newlines between textual and raw
semir. This is an edge case so I don't expect people to really notice in
general, but it seemed unusually aware of what's on a stream, and it
made it harder to do the dump_stream/raw_dump_stream approach, which I
felt would be decent in general, since check is the only phase that can
emit two different things (which I could also just drop -- we don't
really use raw semir anymore, it doesn't seem like a big need to be able
to print it with textual semir, but I'm assuming to just maintain
existing behavior).

In parse, we were previously dumping the tree on verification errors.
I'm removing that because now `--dump-parse-tree` should work fine,
where previously it wouldn't.
2025-07-01 15:51:41 +00:00
David Blaikie 0b53217372 Diagnose partial applied to final types. (#5744)
Is it worth having a distinct diagnostic or phrasing for non-class types
(like tuples, structs, pointers, etc), also for declared-but-not-defined
class types (where we can't tell if they're final or not)? Happy to add
it, but not sure how much detail to put in here at this stage at least.

I chose "non-final type" as somewhat vague wording so it sort of applies
even to pointers/tuples/structs.
2025-06-30 20:35:19 +00:00
Jon Ross-Perkins 4aa62bf5cd Switch Destroy to addr self (#5748)
Pointed out by zygoloid on #toolchain, just taking care of this now.
2025-06-28 00:50:47 +00:00
Jon Ross-Perkins 0722dab0ef Reimplement destroy as an interface (#5678)
This changes `Destroy` to use an interface for its implementation.

Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.

Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
2025-06-27 21:57:14 +00:00
124313269a Represent vtables as a top level SemIR construct (#5472)
The goal was/is to reduce the overhead for vtables in generics - the
previous representation/prior to this patch caused a new vtable to be
created in every specific which isn't generally what we want for Carbon
generics (the whole specific/generic thing is meant to avoid creating
specific versions for things that can be a generic form parameterized by
a specific instead of manifest as a unique entity per specific)

So this moves vtables to a top level object (like functions, classes,
etc). Each dynamic class will have a vtable in this list.

Classes have a `vtable_ptr` instruction in them that points to the
vtable.

The actual generic support hasn't been implemented in this patch, as
I've been struggling with just getting this part of the migration going
& wanted to get it flushed out before adding the additional
complications.

It's possible more laziness when doing cross-file importing would be
suitable - for instance if we only need to reference the vtable from
another file, but don't need to know its individual contents, it may be
beneficial for the functions in the vtable to be import_refs (or to add
another layer of indirection - so it can be a single import_ref
all-or-nothing for the functions in the vtable).

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
2025-06-27 18:45:26 +00:00
David BlaikieandChandler Carruth b39a0f0c8c Basic SemIR partial support (#5736)
This adds something similar to the level of `const` support - that it's
a type, but not the conversions and limitations on usage that are
needed.

---------

Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
2025-06-26 23:55:48 +00:00
Dana Jansens 67b67af7a6 Add a test where impls requires things of another generic type (#5713)
From open discussion on 2025-06-23:
https://docs.google.com/document/d/1Yt-i5AmF76LSvD4TrWRIAE_92kii6j5yFiW-S7ahzlg/edit?tab=t.0#heading=h.5mygrwse32v5

The test does not pass yet, as we have not completed implementation of
`impls` constraints.
2025-06-26 15:45:46 +00:00
Geoff Romer 1893afe479 Tolerate incomplete interface when stringifying ImplWitnessAccess (#5730)
Closes #5727
2025-06-26 14:37:16 +00:00
Richard SmithandJon Ross-Perkins 866794b82a Check and lowering support for for loops. (#5698)
Add check support for `for` loops following #1885. This also adds a
basic `Optional` type to the prelude, as that's necessary to support the
new `Iterate` interface.

Depends on #5688, #5697. Those PRs aren't stacked here, but this change
will crash until they land.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-25 23:45:14 +00:00
Dana Jansens 3585b31813 Handle insts that resolve to type on the RHS of impls (#5712)
In a facet type constraint, you can write `where .Self impls T` for any
facet type `T`, or the constant `type`. It is possible to write `type`
in different ways though, with a `NameRef` instruction appearing on the
RHS instead of `TypeType`. In this case, the canonical constant value's
instruction will still be `TypeType`, so make eval look at the canonical
instruction to see this.

Add a test with an `alias Type = type` which hits this case.

After this change, we only will accept and find one of the following on
the RHS of `impls`:
- `TypeType`
- A facet type
- An error, if the source code had something else there, which will
already be diagnosed. Tested by `fail_right_of_impls_non_type.carbon`
and `fail_right_of_impls_non_facet_type.carbon`.

So we handle these three cases, and drop the implicit handling of other
things which will never appear there.
2025-06-25 21:45:23 +00:00
Jon Ross-Perkins 70c94cb5b4 Clean up --no-prelude-import uses (#5722)
For some of these, it's just replacing with min_prelude/none.carbon.
Some had min_preludes specified, and I'm generally switching those to
none.carbon as well. The one exception is the destroy.carbon test, which
I noticed because of #5678
2025-06-25 21:03:15 +00:00
Dana Jansens fa6322dd8f Propagate errors in import (#5728)
`AddImportedInstruction` was turning errors in an instruction into a
Runtime constant value instead of an Error, which led to crashes when
importing an instruction that had an error inside it somewhere.

Fixes #5726
2025-06-25 20:41:07 +00:00
Dana Jansens b91ad3be36 Add tests for accessing an aggregate member constant through an ImplWitnessAccess (#5702) 2025-06-24 17:37:55 +00:00
Boaz Brickner 11a75d1de1 Move function_ test files to be in function dir and remove the function_ prefix (#5716)
Follow up of
https://github.com/carbon-language/carbon-lang/pull/5645#discussion_r2153064236
and #5607.
2025-06-24 12:53:33 +00:00
Dana JansensandJon Ross-Perkins d17188208c Apply min-preludes to more tests (part 7) (#5704)
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-24 12:43:08 +00:00
Dana Jansens ad4914b575 Avoid deducing errors as argument instructions after subst (#5710)
If convert fails after applying a substitution in deduce, fail deduction
rather than succeeding deduction with an ErrorInst in the deduced
argument.

For example, in
`toolchain/check/testdata/facet/fail_convert_class_type_to_generic_facet_value.carbon`
the `WrongGenericParam` is deduced for the first argument, then
substituted into the second parameter, but the argument can not convert
to the parameter after substitution. In this case, deduction fails
instead of producig a call with an error in the second argument. The
resulting semir drops the call with an error argument:
```
-// CHECK:STDOUT:   %CallGenericMethod.specific_fn: <specific function> = specific_function %CallGenericMethod.ref, @CallGenericMethod(constants.%WrongGenericParam, <error>) [concrete = <error>]
-// CHECK:STDOUT:   %CallGenericMethod.call: init %empty_tuple.type = call %CallGenericMethod.specific_fn() [concrete = <error>]
```
2025-06-23 23:10:33 +00:00
Richard Smith b21d0c4210 Fix tuple patterns matching expressions with atomic tuple form. (#5697)
Fixes #5696.
2025-06-23 22:09:29 +00:00
Dana Jansens ea227be0fe Apply min-preludes to more tests (part 6) (#5691)
This drops file_test runtime from about 3.5s to 3s on my machine.
2025-06-23 21:33:17 +00:00
Boaz Brickner 20f44e0a92 Support a C++ class as a parameter or return by value, similar to a C++ struct (#5709)
Add tests for C++ `union`.
Also fix some typos in `class` tests and remove SemIR ranges from tests
that should diagnose an error.

Part of #5533.
2025-06-23 19:30:56 +00:00
Boaz Brickner 8aedcbcabd Remove TODOs from the test of a declared but not defined struct as a by value parameter/return value (#5708)
These TODOs should have been removed in
https://github.com/carbon-language/carbon-lang/pull/5538 which adds
support for struct by value parameters and return values.

Part of #5533.
2025-06-23 14:45:06 +00:00
Boaz Brickner c025f96894 Replace EXTRA-ARGS: --no-prelude-import with INCLUDE-FILE: toolchain/testing/testdata/min_prelude/none.carbon (#5707)
Follow up https://github.com/carbon-language/carbon-lang/pull/5538 to be
consistent with the practice introduced in
https://github.com/carbon-language/carbon-lang/pull/5694.
2025-06-23 13:57:47 +00:00
Dana Jansens 0b022feb12 Apply min-preludes to more tests (part 8) (#5705)
This drops file_test runtime from about 2.5s to 2s on my machine, which
is now ~50% faster than before
https://github.com/carbon-language/carbon-lang/pull/5653 slowed things
down by adding a lot of stuff to the production prelude.
2025-06-23 13:50:03 +00:00
Boaz Brickner cc698d78f5 When using a C++ struct as a parameter, map its type to a Carbon class type (#5538)
This doesn't support actually passing the value of the struct, which is
planned to be implemented using thunks.

`ClangDeclId` value is now `ClangDecl` which includes the mapped Carbon
instruction in addition to the Clang declaration. This allows finding
the Carbon instruction for a given Clang declaration, which is necessary
for mapping a Clang struct parameter type to the Carbon class without
doing name lookup. We don't take the instruction as part of the hash
key, as discussed in
[Discord](https://discord.com/channels/655572317891461132/768530752592805919/1380575881050718469).

To map the type, we also need to map namespaces. To avoid recursion for
inner namespaces, we use a vector.

Note that the first commit just changes the order of functions in the
file to make review easier.

C++ Interop Demo (that shows missing behavior):

```c++
// hello_world.h

struct S {
  S(const S&) { x = 1; }
  int x;
};

void hello_world(S s);
```

```c++
// hello_world.cpp

#include "hello_world.h"

#include <cstdio>

void hello_world2(S s) { printf("hello_world2: %d\n", s.x); }

void hello_world(S s) {
  printf("hello_world: %d\n", s.x);
  hello_world2(s);
}
```

```carbon
// main.carbon

library "Main";

import Cpp library "hello_world.h";

fn Run() -> i32 {
  var s : Cpp.S;
  Cpp.hello_world(s);
  return 0;
}
```

```shell
$ clang -c hello_world.cpp
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link hello_world.o main.o --output=demo
$ ./demo
hello_world: -1108224096
hello_world2: 1
```

Part of #5533.
2025-06-20 16:51:58 +00:00
Dana JansensandJon Ross-Perkins 76cdbd8a5a Introduce the none.carbon min-prelude (#5694)
The none.carbon min-prelude is not just an empty prelude, it also
prevents any prelude from being imported at all. So no import machinery
runs before the test, only the `package` statement from the prelude
would run.

Use the none.carbon min-prelude in a few tests that were specifying
`--no-prelude-import` to give it a trial run.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-18 20:45:46 +00:00
Dana Jansens 59e2846623 Apply min-preludes to more tests (part 5) (#5690)
This drops file_test runtime from about 4s to 3.5s on my machine.
2025-06-18 20:43:36 +00:00
Boaz Brickner 64ad57adef Update toolchain/check/testdata/interop/cpp/function_param_int*.carbon and toolchain/check/testdata/interop/cpp/function_return.carbon tests to use sem ir ranges (#5645)
Follow up of #5594.

Trying to compromise SemIR size, having enough information and
complexity of tests, I've duplicated representative tests to a separate
test file with `--dump-sem-ir-ranges=if-present`.
2025-06-18 07:50:44 +00:00
Dana Jansens 2b7c75d8a5 Avoid incorrect conflicting assignment diags in rewrite constraints (#5686)
When building a FacetType from an existing FacetType, don't diagnose
rewrite constraints that are compatible with the existing FacetType.

To do this, we consider two RHS as identical[1] if they have the same
constant value after substituting from available rewrite constraints in
the being-constructed FacetType, since the syntactic representation of
the RHS is lost during eval.

[1]
https://docs.google.com/document/d/1Yt-i5AmF76LSvD4TrWRIAE_92kii6j5yFiW-S7ahzlg/edit?tab=t.0#heading=h.qti4vn50zwy
2025-06-18 01:10:26 +00:00
Dana Jansens 28fea821b7 Add min-preludes to more slow tests (part 4) (#5682)
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.

For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
2025-06-17 21:10:04 +00:00
Jon Ross-Perkinsandjosh11b ed82f7ef3f Add ranges to where_expr tests (#5630)
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2025-06-17 21:04:49 +00:00
Dana Jansens 07aec169e1 Add min-preludes to more slow tests (#5681)
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 7s to about 6s.

For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
2025-06-17 20:55:48 +00:00
Dana Jansens bff601e417 Add min-preludes to most of lowering and a few more slow tests (#5680)
Adds min-preludes to a few more slowest tests, and adds them to most of
the lowering tests, with a few exceptions that make use of operators.
This take the runtime of file_test down from about 8s to about 7s on my
machine.

We add support for Negate on uints in the min-preludes.
2025-06-17 20:43:31 +00:00
Dana Jansens e09419bfd4 Make more tests into min-prelude (#5676)
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.

We introduce a few more flavours of min_prelude to support more tests.
2025-06-17 19:25:57 +00:00
Dana JansensandJon Ross-Perkins 19d59b2a8d Reduce use of the prelude in tests (#5683)
Remove use of i32/bool when a builtin type or test-define class type can
work. Make `Sub` user-defines in a test that is testing builtin
functions and not trying to test the prelude, in the same way that it
defines its own Negate. Reduce use of the + operator when it isn't
contributing to the test's coverage, since the + operator needs the full
prelude. Remove use of Core.Print when it's not required for the test.

Move `deduce_nested_facet_value.carbon` to its own file since it uses
TypeAnd, and the rest of deduce.carbon does not, but uses i32. This
means they can each use a different min-prelude.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-17 17:58:59 +00:00
Dana Jansens 1a7c1a134e Add some failing tests with cycles and self-referential facet types (#5674)
Most of these tests should pass but don't, though one fails but in the
wrong way.
2025-06-17 16:49:56 +00:00
Richard SmithandGeoff Romer 80529aaef9 Convert the scrutinee of a binding pattern to the right category. (#5662)
When the binding pattern appears within a `var` pattern, convert to a
reference. Otherwise, convert to a value.

This gets the advent of code examples to produce the right answers again
:)

---------

Co-authored-by: Geoff Romer <gromer@google.com>
2025-06-17 16:45:19 +00:00
Jon Ross-Perkins 1c09de9b87 Add min_prelude/convert.carbon to tests missing ImplicitAs (#5677)
import_use_generic.carbon has the comment "// We're just checking that
this doesn't crash. It's not expected to compile." Because it involves
import behavior by name, I'm not touching it. Other than that, while
maybe it's better to test with less, the `ImplicitAs` errors at best
feel difficult to understand, and at worst could be masking an issue.
2025-06-16 23:50:45 +00:00
Dana JansensandJon Ross-Perkins 09a5fddff8 Fix sorting of instructions in Facet Type resolution (#5664)
The sort and dedupe operations in facet type resolution explicitly work
with `ImplWitnessAccess` instructions as being a reference to an
associated constant on some entity. If only one of the instructions is
an `ImplWitnessAccess`, we still want to consider that one as such, not
get its constant value, which may be some concrete type, and use that
for comparison instead.

This makes the new test fail (which we don't want) in a consistent way
with a similar test of TypeAnd (which we also don't want to fail),
making the system more consistent, while leaving some improvements to be
done.

Avoid inconsistent orderings between instructions, by making the
comparison function into a total order. To do so, we sort
ImplWitnessAccess instructions first, and sort them by their InstId.
Non-ImplWitnessAccess instructions come second, and sort them by their
constant InstId. Thanks to jonmeow for figuring out that the function
was not producing a total order and why.

Since this means the order is no longer relative to source order, we
order the two assignments in the diagnostic by source order(ish) by
putting the lower InstId first in the diagnostic output.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-13 18:01:39 +00:00
Dana JansensandJon Ross-Perkins fff8c14066 Restructure WhereExpr eval to use continue less (#5660)
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-13 16:19:17 +00:00
Dana JansensandJon Ross-Perkins f02ad1f1ca Diagnose runtime values in eval where a constant value was expected (#5659)
Uses of `ConstantValueStore::GetConstantInstId` or
`ConstantValueStore::GetInstId` in eval indicate that the code expects a
constant value. Instead of just ending up with `None` in strange places,
diagnose this and convert to an `ErrorInst` when expectations are not
met.

We add `RequireConstantValue` to pair with `GetConstantValue`, and
rename `GetConstantValueIgnoringPeriodSelf` to
`RequireConstantValueIgnoringPeriodSelf` since the former would just be
unused.

Adds a test where a runtime value ends up in the RHS of a rewrite
constraint, where a constant value is expected. This issue was uncovered
by a fuzzer.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-06-13 14:32:54 +00:00
Richard Smith 344f0b7550 Support for heterogeneous operators. (#5653)
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.

I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
2025-06-13 01:55:24 +00:00
Dana Jansens 517bec24ef Nested facets (#5644)
Given a facet type: `(Z where .X = .Y) where .X =.Y`

The rewrite constraints in the inner facet type are each an
`ImplWitnessAccess` into a witness for the self of type `Z` (which is
the facet type before the `where`). The rewrite constraints in the outer
facet type are each an `ImplWitnessAccess` for the self of type `Z where
.X = .Y`, which is a different self facet type.

This means when deduping in canonicalization, the first `.X` and the
second `.X` are different instructions, and different constant values,
so they both remain in the rewrite constraints, incorrectly. Then if the
outer `.X` is allowed to evaluate to a value from its facet type, it
finds `.Y` resulting in `.Y = .Y` which is also incorrect.

Because of the failure to dedupe the first facet type, that is also
diagnosed as two different assignments to the same `.X`. To resolve
that, we introduce `CompareFacetTypeConstraintValues()` compare values
in facet type constraints, and treat accesses to the same associated
constant in the same facet value as `equivalent` even when through
different witnesses. This allows us to dedupe the two `.X = .Y` rules
into one in the combined facet type.

Given a different facet type: `(Z where .X = ()) where .X = {}`. Here we
want to diagnose that `.X` has been assigned two different values. To do
so, we need to see that the two `.X` values are the same, and we use
`CompareFacetTypeConstraintValues()` to do this comparison. Then we see
two rewrite rules for the same LHS, and we can diagnose that.

We enable evaluating `ImplWitnessAccess` on `.Self` to pull a value from
rewrite constraints in a facet type so that we can see that we are not
incorrect evaluating the LHS of rewrite constraints and producing
cycles. By doing so, also enable generic code to see and use concrete
values in associated constants in facet types.
2025-06-12 22:06:12 +00:00
Dana Jansens 3689a3b3e4 Call GetConstantFacetTypeInfo on fully constructed FacetTypeInfo in WhereExpr and BitAnd (#5647)
The `BitAnd` operation combines two `FacetTypeInfo` structures by
concatenating their lists, but did not apply the current specific to the
instructions in the `FacetTypeInfo` as it forgot to go through
`GetContantFacetTypeInfo`.

`WhereExpr` handling duplicates a lot of the logic in
`GetConstantFacetTypeInfo` by calling `GetConstantValue` on things,
instead of calling `GetConstantFacetTypeInfo` on the `FacetTypeInfo` it
constructs. This meant it also needed to call `GetConstantFacetTypeInfo`
on the base facet type, and on any `impls`-requirement facet types
before merging their values together into a single `FacetTypeInfo`.

Instead, make `WhereExpr` more like `BitAnd`, and have it concatenate
things together as-is to construct a `FacetTypeInfo`. Then call
`GetConstantFacetTypeInfo` to canonicalize it and return a constant
value referring to it.

In `GetConstantFacetTypeInfo` we fix a crasher by propagating errors
inserted into the `FacetTypeInfo` out to the `Phase` so that the
resulting instruction depending on the `FacetTypeInfo` is not resolved
to a constant value with errors inside it. A test is added for this,
which was crashing on import of the `FacetType` with an error within
from the imported `impl` decl.

This refactoring gives us three benefits:
* There's now only a single place that does
`ResolveRewriteConstraintsAndCanonicalize`, which is inside
`GetConstantFacetTypeInfo`. This makes the inputs/behaviour of
`ResolveRewriteConstraintsAndCanonicalize` more consistent.
* There's now only a single place that updates the instructions in
`FacetTypeInfo` constraints with new constant values, so that changes
that rely on observing and interacting with that code only need to be
written in a single place. This will avoid duplicating logic in
https://github.com/carbon-language/carbon-lang/pull/5644.
* This will make it easier to move `WhereExpr` handling to a
`EvalConstantInst` function, as it no longer directly depends on
`GetConstantValue()` from `eval.cpp`.
2025-06-12 21:20:54 +00:00
Ivana Ivanovska c7afc85541 Rename splits for intN_t tests (#5615)
Renaming the splits in the tests for `int16_t` and `int32_t` to
emphasize testing typedefs.

Part of #5263 .
2025-06-12 16:05:38 +00:00
Richard Smith 4e5dccdbf7 When making a direct call to a thunk, inline the call in SemIR. (#5642)
This preserves the constant values of the arguments to the thunk, which
is important if the thunk requires conversion of an `IntLiteral` to some
other type. This should become unnecessary once we have form support,
but avoiding the indirection through a thunk function seems valuable
even once that support is in place.

To support this, track whether a function is a thunk on the Function
object, and if so, what the callee of the thunk is. This information is
also included in formatted SemIR when dumping the thunk.
2025-06-11 21:34:01 +00:00
Dana Jansens bdf5f00af0 Resolve the RHS of rewrite constraints in facets (#5639)
If the RHS of a rewrite constraint refers to an associated constant,
pull the value for that constant from other rewrite constraints. We
repeat this each time a RHS value is changed until we reach a fixed
point, as per the "Rewrite constraint resolution" rule:
https://docs.carbon-lang.dev/docs/design/generics/appendix-rewrite-constraints.html#rewrite-constraint-resolution

While replacing references to associated constants in the RHS, if the
reference is to the LHS of the same rewrite constraint, we diagnose it
as a cycle which has no fixed point, and replace reference to the
associated constant with `ErrorInst`.
2025-06-11 21:11:00 +00:00
Jon Ross-Perkins 122800881b Remove redundant ranges=only flag settings (#5648) 2025-06-11 16:47:40 +00:00
Boaz Brickner 29d4aae722 Update most toolchain/check/testdata/interop/cpp tests to use sem ir ranges (#5594)
All except
`toolchain/check/testdata/interop/cpp/function_param_int*.carbon` and
`toolchain/check/testdata/interop/cpp/function_return.carbon`.

Don't output SemIR for cases that are intended to fail.
2025-06-11 12:35:55 +00:00
Richard Smith 2472f44e44 Track pending thunks on the deferred definition worklist. (#5609)
Instead of using somewhat different approaches for defining in-line
methods at the end of the enclosing scope and defining thunks at the end
of the enclosing scope, we now use the same worklist for both.

This fixes a bug where we would crash when defining thunks if there
happens to be nothing else on the deferred definition worklist, leading
to our leaving the enclosing impl scope before we try to define the
pending thunk. That would only happen if the impl contains no in-line
member function bodies, so only if the impl has only a forward
declaration or a builtin declaration for every method. The latter
case happens (a lot) if we start using thunks in the prelude impls.

One complicating factor here is that this means the deferred definition
worklist moves from the layer containing `check/handle*` and
`check/check_unit.cpp` into the layer containing `check/context.cpp`.
Allowing that required moving a couple of other things that it depends
on -- notably `SuspendedFunction` and `HandleSuspendedFunction` --
around.
2025-06-10 22:09:31 +00:00
Richard Smith e24ba02352 Fix lowering of thunks in generic impls (#5631)
Build a `SpecificConstant` (if needed) and `NameRef` instruction when
referencing the thunk target from a thunk. The former is necessary if
the impl is generic in order to call the right version of the thunk
target. This previously caused a crash in lowering.

Also add some more check testing for the interaction of thunks and
generics. This testing uncovered an unrelated bug with thunks for
generic interface functions for which I've added a TODO.
2025-06-10 20:54:58 +00:00
Ivana Ivanovska 3d603fced7 Fix C++ function params and return values printed in SemIR (#5468)
Fix `pattern_block_id` and `call_params_id` for C++ function decl
import, to get the correct SemIR printout for the C++ functions i.e.

1) Fill in missing parameter info in the function decls:
```
// CHECK:STDOUT:   %foo.decl: %foo.type = fn_decl @foo [concrete = constants.%foo] {
// CHECK:STDOUT:     %a.patt: %pattern_type.2f8 = binding_pattern a [concrete]
// CHECK:STDOUT:     %a.param_patt: %pattern_type.2f8 = value_param_pattern %a.patt, call_param0 [concrete]
// CHECK:STDOUT:   } {
// CHECK:STDOUT:     %a.param: %i16 = value_param call_param0
// CHECK:STDOUT:     %.1: type = splice_block %i16 [concrete = constants.%i16] {
// CHECK:STDOUT:       %int_16: Core.IntLiteral = int_value 16 [concrete = constants.%int_16]
// CHECK:STDOUT:       %i16: type = class_type @Int, @Int(constants.%int_16) [concrete = constants.%i16]
// CHECK:STDOUT:     }
// CHECK:STDOUT:     %a: %i16 = bind_name a, %a.param
// CHECK:STDOUT:   }
```
2) Print the params and return values:

```
// CHECK:STDOUT: fn @foo_short() -> %i16;
```

```
// CHECK:STDOUT: fn @foo(%a.param: %i16);
```

Closes #5449
2025-06-10 17:17:19 +00:00