Otherwise these end up as unattached constants (see the baseline test
changes) and can't be resolved by `GetConstantValueInSpecific` in
lowering or in further derived vtables.
If the class is non-generic, then it's fine for the vtable entry for
some function inherited from a generic base is represented as an
unattached constant, since the specific in that specific_function is
already fully resolved.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
When using this with filesystem errors, a few issues came up that I'm
fixing here. They're small enough and near enough in code that it didn't
seem worth splitting part.
- It's nice to forward declare custom error types and an API using them
and then define both later. That doesn't work with `requires` but works
fine with `static_assert`, so go back to that pattern here. A test is
added that checks this pattern compiles.
- The `operator*` didn't support moving out of `ErrorOr`, which is
especially important when writing code that is happy with just
`CARBON_CHECK`-failing on any errors. For example, we have a lot of
filesystem code in tests that is made *much* more concise by just using
`*` on a function return and letting the built-in checking ensure no
errors were present. But when the value is move-only, this requires
special overloading. Add that and add a test with a move-only value.
- There wasn't an idiomatic way to do something like `operator*` for
`ErrorOr<Success, ...>`. This PR factors out the checking for `ok()`
into a `Check()` method that can be used to make code more readable that
is intentionally just verifying no error. Also makes the result of
`operator*` `[[nodiscard]]` to improve error messages and help void
accidental bugs.
- The `IsError` and `IsSuccess` test helpers required printable values
which isn't always realistic. Teach the printing logic to be conditional
on some indication of a printable value and gracefully fall back to a
generic string otherwise for testing output.
- The use of the `listener` in `IsError` and `IsSuccess` assumed a
non-null stream. Instead, streaming should go directly to the `listener`
as it is configured to only actually do the output when a stream is
installed. When a stream isn't installed, the previous code would crash
if the `MatchAndExplain` method ended up called without an 'interesting'
stream attached to the listener.
- When doing a `CARBON_CHECK` that there isn't an error, print the error
out as the check failure message. Without this, all the nice error
message work doesn't end up helping the debugging of test code that hits
these errors, etc.
The command is:
```
dump <context> [<ID>|<TYPE><ID>|<TYPE> <ID>|-- <ID>]
TYPE can be "inst", "entity_name", etc.
```
This saves a lot of typing of `SemIR::MakeInstId()` in a debugger, and
allows copy-pasting ids from dump output, as they take the form
`inst33`, etc.
Add a new type, `custom_layout_type`, representing a struct type whose
size, alignment, and field offsets can be manually controlled. Use this
as the object representation type for imported C++ class types (which
also includes struct and union types), allowing us to model C++ class
type layouts. In passing, also add support for incomplete C++ class
types, mapping them into incomplete Carbon class types.
Map C++ fields into Carbon field declarations, allowing direct access to
C++ fields from Carbon. So far, no support is added for base classes nor
anonymous struct or union declarations; those will be added in
subsequent PRs. Also, we don't map C++ access control into Carbon yet,
so all C++ fields are accessible regardless of their access control.
For now we still use a `struct_type` as the object representation for
empty C++ classes, in order to continue to support our existing tests
that convert `{}` to empty C++ class types. This is temporary and should
be removed once we support interop with C++ class initialization.
In trying to have types implicitly define `impl Self as Destroy`, I'm
wanting to use standard impl declaration support. For example, this
should produce more consistent errors if someone writes code that would
conflict with the generated impl. I'm also concerned, with the
complexity involved, that I'd get something wrong if I tried to write a
divergent implementation.
I'm only factoring out the start of the declaration. Right now the
finishing portion seems much simpler and lower risk to duplicate; I may
also factor it out separately. But either way, I think `StartImplDecl`
here is high churn risk due to its size (`CheckConstraintIsInterface` I
also expect to be used).
This is in anticipation of having `class` depending on the `Destroy`
interface, in order to automatically generate implementations of it.
I'm doing some sorting of imports in the prelude too, which I hope will
be uncontroversial; clang-format would do similar in C++...
This doesn't split apart the current error type into one that tracks
location and one that doesn't, although that might be easier to do once
we have this.
Instead, this is primarily intended to support custom error types that
lazily materialize the error message in case that can be avoided by
completely handling the error. For example, many file system operations
are *expected* to produce errors even in the hot path and we don't want
to render `ENOENT` (for example) to a pretty string and instead will
directly query the error to understand and handle it in code.
The type parameter ordering isn't the most obvious, but helpfully allows
us to default the error type in a useful way.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is to make it easier to debug formatter issues. It means printing
can now result in things like:
```
<unexpected>.inst57.loc4_24: type = bind_symbolic_name ...
```
Where the "unexpected" reflects incorrect construction.
Expand support for `int` and `short` to cover all the other `intN_t` and
`uintN_t` types too. We achieve this by asking Clang what the `intN_t` /
`uintN_t` type that it would use for the given bitwidth is, and checking
if that's the type we're trying to map.
This is trying to make it clearer when vectors are being indexed with
`CheckIRId`.
The only one that I still kind of want to change is the
`SmallVector<std::unique_ptr<CompilationUnit>>`, but because it's a
`unique_ptr` that's a little more complex. I may not bother.
Note, some of the changes around nuanced `SmallVector` interactions were
based on trying to copy the way `SmallVector` itself takes arguments,
like with range passing.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This will allow reusing existing entity names when there are nested
.Self references in a facet type. They are canonical as the contents of
a .Self reference are all canonical.
- Update bazel to 8.3.1, just to stay reasonably up to date.
- Bazel warned about the platforms version, so I generally updated
packages that have central registry versions.
- Note there's a newer re2 in the central registry, but I got a download
error with it.
- `--experimental_guard_against_concurrent_changes` is deprecated; I
wasn't sure it's worth explicitly setting
`--guard_against_concurrent_changes=full`, but figured it may be
consistent (it's not clear to me -- see
https://github.com/bazelbuild/bazel/pull/25874).
Also update `RequestVtableIfVirtual` to strip `impl` from functions in
classes without a base class - this avoids a duplicate diagnostic where
they're diagnosed as being in a class without a base class, then
diagnosed again because they don't have a matching function in a base
class.
Versus #5823, this is manually updated (still verified with `pre-commit
run -a`).
I also looked at updating prettier; adding a note why I'm not doing
that.
Use `full.carbon` min-prelude for any tests using the full prelude. A
few tests were using it unnecessarily and are changed to a more minimal
one in the process.
Any test which does not include some min-prelude will now fail with an
error.
Before this change we crash in this case when trying to use the outer
type.
After this change we diagnose a TODO.
Will add the missing support for this in a separate PR.
Part of #5533.
This changes ConstantValueStore to use ValueStore so that we get the
allocation flow that we're leaning towards there. This adds
`ConstantId::SymbolicId` to represent what was previously an int32
"symbolic_index" (although called an index, it's consistent with ID
usages).
I'm also changing Chunk::at/push to be consistent with the wrapping
Get/Add naming; the naming difference sticks out more with
UninitializedFill being added.
For example, this would allow using `std::string::size`, which is
templated because it's a member of the class template
`std::basic_string`, but isn't itself a function template.
This is instead of having one test file that has different return types
and two test files for `i16` and `i32` param tests, which doesn't seem
consistent.
First commit does file renames for easier review.
Part of #5063.
David BlaikieandDana Jansens
Richard Smith
Chandler Carruth
Boaz Brickner
Geoff RomerandRichard Smith
dependabot[bot]