Attach the cleanup to the `Temporary` instruction instead of to the
`TemporaryStorage` instruction. We create `TemporaryStorage`
instructions speculatively when creating an initializing expression, and
may overwrite those instructions with other instructions if it turns out
that a temporary is not required. Instead, wait until we finalize the
temporary and create a `Temporary` instruction to register the cleanup.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
When an error diagnostic has an unattached location, for example because
the diagnostic points into a file that's in the prelude, use the next
attached location to position the error diagnostic's CHECK line. In
particular, if the error is followed by a note, use the position of the
note to determine where to place the error.
This exposes a general mechanism to do final fixups of the CHECK lines
to individual file_test binaries, which the toolchain's binary uses to
special-case error / warning CHECK lines.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
toolchain/check/testdata/builtins/char/basics.carbon and
toolchain/lower/testdata/builtins/char.carbon are probably the most
interesting tests here. The parse tests is required because this adds a
new node kind, and we need coverage of it; but the attached info is
minor. There's a fair amount of test churn here because I'm adding the
Core.Char and Core.CharLiteral types as new singletons.
My intent here is that `CharId` is always a unicode code point, even
when the type is a `Char` and thus must be a single UTF-8 code unit
(single byte). This mainly means the stored value of a `CharValue` can
be printed internally without knowing the type.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Iterate over arrays by producing their elements in the obvious way. We
use `i32` as the cursor type because that's the type that check converts
array indexes to. This may need revisiting if we support arrays with
more than 2Bi elements.
Also includes a fix for an import crash bug that's triggered by this
change, borrowed from #5873.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
In `BuildUnaryOperator`, `GetOperatorOpFunction` is treated as
desugaring, but `PerformCompoundMemberAccess` and `PerformCall` are not.
This treats all of destruction as desugaring.
This leads to some instructions being elided, because of `GetOrAddInst`
behaviors:
> // If the instruction has a desugared location and a constant value,
returns
> // the constant value's instruction ID. Otherwise, same as AddInst.
This changes instructions that previously had a non-desugared location
to instead have a desugared location, so if they also have a constant
value then the constant value can be used directly.
This just catches uses equivalent to `return;` and `return <expr>;`.
Note it's just extending the current implicit return logic, not really
adding much unique here.
I'm still delaying break and continue because those require partial
destruction, which is more work and I want to be careful to get it
right.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
For some of these, it's just replacing with min_prelude/none.carbon.
Some had min_preludes specified, and I'm generally switching those to
none.carbon as well. The one exception is the destroy.carbon test, which
I noticed because of #5678
This drops file_test runtime from about 3s to 2.5s on my machine, which
is now ~30% faster than before #5653 slowed things down by adding a lot
of stuff to the production prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds min-preludes more tests which were seen as slow and their
surrounding neighbours. This drops the file_test runtime on my machine
from about 6s to about 4.5s.
For a few files that are clearly only testing diagnostics, we drop the
if-present semir ranges and the associated TODO.
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
Remove use of i32/bool when a builtin type or test-define class type can
work. Make `Sub` user-defines in a test that is testing builtin
functions and not trying to test the prelude, in the same way that it
defines its own Negate. Reduce use of the + operator when it isn't
contributing to the test's coverage, since the + operator needs the full
prelude. Remove use of Core.Print when it's not required for the test.
Move `deduce_nested_facet_value.carbon` to its own file since it uses
TypeAnd, and the rest of deduce.carbon does not, but uses i32. This
means they can each use a different min-prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When the binding pattern appears within a `var` pattern, convert to a
reference. Otherwise, convert to a value.
This gets the advent of code examples to produce the right answers again
:)
---------
Co-authored-by: Geoff Romer <gromer@google.com>
import_use_generic.carbon has the comment "// We're just checking that
this doesn't crash. It's not expected to compile." Because it involves
import behavior by name, I'm not touching it. Other than that, while
maybe it's better to test with less, the `ImplicitAs` errors at best
feel difficult to understand, and at worst could be masking an issue.
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
Now that included files can specify `EXTRA-ARGS`, this uses that to
handle min_prelude files. Also moves `As`/`ImplicitAs` out to a shared
file, partly because we duplicate it a few times over, partly just to
show that it works.
Also removes the `min_prelude/` subdirectories because many of these
files were touched by autoupdate regardless. I noticed one conflict for
`impl_thunk.carbon`, so renaming that one to
`impl_thunk_min_prelude.carbon`.
`GetArgReplacements` I simply noticed was unused, so removing it.
People seemed receptive [on
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1379196447827689553),
so proceeding.
For the two name conflicts, I've set it up so that there's a
"foo.carbon" and "foo_with_prelude.carbon", to indicate that the
no-prelude approach is preferred (with a shorter name).
Note min_prelude will require a little more work/thought, I want to
avoid adding `--custom-core` etc.
Now that I'm getting to a relatively low number of remaining files for
this cleanup, this is my second look for things that I missed before in
directories that were generally already swept up (mostly by the TODOs).
Previously we walked the global variables defined by the current file
and emitted an LLVM global variable definition for each of them. Now
instead, when emitting a constant reference to a global variable, we
emit an LLVM global variable declaration, and we then subsequently walk
the global variables defined by the current file and convert each of
them from a declaration to a definition.
In order to make import of names of global variables work, add support
for import of `var`, as well as support for importing `tuple_access` and
`tuple_pattern` in the case where the `var` has a tuple pattern in its
declaration. Also treat `bind_name`s that are reference bindings to
`var`s as having the same constant reference value as their `var` so
that we can properly import and lower them.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
I think this would probably have prevented the missed include in #5469
-- it would've just failed completely with a "missing prelude"
diagnostic.
Also note this excludes the included IR from output, because it's
probably low-value to print.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
Adds an empty `min_prelude/destroy.carbon` in anticipation of turning it
into an interface. Update `no_prelude` tests to be `min_prelude` and
import it where needed; in some cases, modify the file to remove the
dependency (i.e., rewrite code to have nothing to destruct).
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Provide builtins for compound assignments instead of defining them in
the prelude as a use of a binary operator and an assignment. This allows
us to lower compound assignment directly to LLVM operations instead of
producing a function call. In the short term this also allows us to
define a type-generic compound assignment in the prelude.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Use that instead of `AddInstInNoBlock` to get the value of an
instruction when evaluation might depend on the `InstId` but only the
`ConstantId` of the instruction is desired by the consumer.
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.
Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.
While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.
This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.
This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.
Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Richard Smith
Dana JansensandJon Ross-Perkins
