Attach the cleanup to the `Temporary` instruction instead of to the
`TemporaryStorage` instruction. We create `TemporaryStorage`
instructions speculatively when creating an initializing expression, and
may overwrite those instructions with other instructions if it turns out
that a temporary is not required. Instead, wait until we finalize the
temporary and create a `Temporary` instruction to register the cleanup.
This is necessary if the source type is an adapter, as we would not
otherwise be able to determine what type it adapts and hence could be
converted to.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Iterate over arrays by producing their elements in the obvious way. We
use `i32` as the cursor type because that's the type that check converts
array indexes to. This may need revisiting if we support arrays with
more than 2Bi elements.
Also includes a fix for an import crash bug that's triggered by this
change, borrowed from #5873.
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
In `BuildUnaryOperator`, `GetOperatorOpFunction` is treated as
desugaring, but `PerformCompoundMemberAccess` and `PerformCall` are not.
This treats all of destruction as desugaring.
This leads to some instructions being elided, because of `GetOrAddInst`
behaviors:
> // If the instruction has a desugared location and a constant value,
returns
> // the constant value's instruction ID. Otherwise, same as AddInst.
This changes instructions that previously had a non-desugared location
to instead have a desugared location, so if they also have a constant
value then the constant value can be used directly.
This just catches uses equivalent to `return;` and `return <expr>;`.
Note it's just extending the current implicit return logic, not really
adding much unique here.
I'm still delaying break and continue because those require partial
destruction, which is more work and I want to be careful to get it
right.
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
Replace the binary `Operation` interfaces with the `OperationWith(T:!
type)` interfaces described in the design, and add a `Result` associated
type for both unary and binary operations. Update the `impl`s in the
prelude for integer types to use the new form, including supporting
implicit conversion of either operand.
I've tried to split this PR up into commits focused on distinct changes
for review convenience. It may be simplest to review it one commit at a
time.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
When converting to a facet there are three different failure modes:
1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.
Closes#5027
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Richard Smith
Dana JansensandJon Ross-Perkins
josh11bandJosh L
Alina Sbirlea
Calvin
David Blaikie