Files
shelfmark/tests
CaliBrain d42494c696 fix(tor): survive container restarts and run Tor as debian-tor (#1517)
With USING_TOR=true, any restart that reuses the container (docker
restart, a Docker daemon restart, a host reboot) put it in a restart
loop. Only recreating the container ended it.

Tor appends to /var/log/tor/notices.log, and the file survives the
restart. tor.sh waited for Tor by grepping that log for "Bootstrapped
100%", so the previous boot's line passed at once, before Tor had
connected to anything. The NAT rules then went live, Tor could not
finish bootstrapping behind them, the connectivity check could not
resolve check.torproject.org, and the next boot found the same stale
line. tor.sh now moves the previous log to notices.log.prev before it
starts Tor, so the wait and the watchdog only see this boot's output.

Tor could not finish behind the NAT rules because it ran as root. The
rules exempt only debian-tor's traffic from the transparent redirect, so
every relay connection Tor opened after they went live was redirected
into its own TransPort: the log shows dozens of TLS handshakes dying.
This also meant a Tor that lost its guard could never reconnect, on any
kernel. torrc now has `User debian-tor` and `DataDirectory
/var/lib/tor`. Tor still binds DNSPort 53 as root, then drops. It opens
its log after dropping and refuses to start if it cannot, so tor.sh
hands the fresh log to debian-tor first.

The check also failed without a word. `RESULT=$(curl -s ...)` under
`set -e` ended tor.sh with curl's exit status, so the only trace was
ExitCode=6 (could not resolve host) in `docker inspect`. A reply that
was not the expected JSON did the same through grep. The check now:
- retries twice, 10s apart, since a fresh circuit can fail its first
  lookup;
- logs each failure with curl's exit status and error;
- says when it gives up and prints the last Tor log lines;
- still stops the container when traffic does not go through Tor.

- Reproduced on the v1.4.0 image (tor.sh is unchanged since then): after
  one `docker restart` the container restarted 9 times in 150s, each
  boot ending at "Verifying Tor connectivity...".
- With the new tor.sh mounted into the same image, the container went
  through 2 restarts in a row. Each boot verified Tor and reached
  gunicorn within 15-21s, and the restart policy never had to step in.
  Tor runs as debian-tor and its logs belong to it.
- Restarting Tor (`supervisorctl restart tor`) once the NAT rules were
  live, so it had to open new relay connections: as debian-tor it
  bootstrapped again in 4s and traffic still went through Tor. As root
  it had not bootstrapped after 120s, 1775 TLS handshakes had died, and
  curl could not resolve check.torproject.org (exit 6).
- A SIGHUP, which the rotation monitor sends every 5 minutes, keeps
  DNSPort 53 working after the drop to debian-tor.
- 9 new tests in tests/config/test_tor_script_rules.py. 8 of them fail
  on the old tor.sh; the 9th checks that traffic outside Tor still stops
  the container. Three need `grep -P` and skip on macOS, so I also ran
  the file in the Debian image: 23 passed.
- The `make python-checks` tools pass (ruff check and format,
  basedpyright on the app and tests, vulture). The non-e2e suite
  passes: 4366 tests on 86943f5.

Fixes #1502
2026-10-21 10:24:51 -04:00
..
2026-10-21 02:06:31 -04:00
2026-10-21 02:06:31 -04:00
2026-10-21 02:06:31 -04:00
2026-10-20 23:40:33 -04:00
2026-10-20 23:40:16 -04:00
2026-10-21 02:06:31 -04:00

Test Suite

This directory contains the test suite for Shelfmark. Tests are organized by scope and component.

Quick Start

# Sync the local Python environment once
make install-python-dev

# Run all unit tests locally (fast, no external dependencies)
uv run pytest tests/ -v -m "not integration and not e2e"

# Run all Python static analysis (lint, format, typecheck, dead code)
make python-checks

# Run E2E API tests against a running app stack
uv run pytest tests/e2e/ -v -m e2e

# Run everything except integration tests locally
uv run pytest tests/ -v -m "not integration"

Test Structure

tests/
├── config/                 # Settings & configuration tests
│   ├── test_docker_volumes.py          # Docker volume mapping
│   ├── test_environment.py             # Environment variable handling
│   ├── test_mirror_settings_live_apply.py  # Mirror settings live reload
│   ├── test_mirror_settings_options.py # Mirror settings options
│   ├── test_security.py               # Security settings
│   └── test_oidc_settings.py          # OIDC settings fields & show_when conditions
│
├── core/                   # Core application logic tests
│   ├── test_admin_users_api.py         # Admin user CRUD API endpoints
│   ├── test_booklore_multiuser.py      # BookLore per-user override merging
│   ├── test_builtin_multiuser.py       # Builtin auth multi-user migration
│   ├── test_download_processing.py     # Download file processing
│   ├── test_hardlink.py               # Hardlink/copy operations
│   ├── test_library_processing.py      # Library file processing
│   ├── test_manual_query.py           # Manual search query handling
│   ├── test_mirrors_config.py         # Mirror configuration
│   ├── test_naming.py                 # File naming templates
│   ├── test_oidc_auth.py             # OIDC auth helpers (group claims, user provisioning)
│   ├── test_oidc_integration.py       # OIDC integration into auth system (logic mirror)
│   ├── test_oidc_routes.py           # OIDC Flask route handlers
│   ├── test_part_number_extraction.py  # Part number extraction
│   ├── test_per_user_downloads.py     # Per-user download queue filtering
│   ├── test_permission_handling.py    # File permission handling
│   ├── test_processing_integration.py  # Processing integration
│   ├── test_search_plan.py           # Search plan logic
│   ├── test_user_db.py               # UserDB CRUD operations
│   └── test_user_template_variable.py  # {User} template variable in naming
│
├── e2e/                    # End-to-end API tests
│   ├── conftest.py         # Fixtures (APIClient, DownloadTracker)
│   ├── test_api.py         # Core API endpoint tests
│   ├── test_download_flow.py   # Full download journey tests
│   └── test_prowlarr_flow.py   # Prowlarr-specific tests
│
├── prowlarr/               # Prowlarr plugin tests
│   ├── conftest.py         # Shared fixtures
│   ├── test_clients.py     # DownloadClient base, registry, DownloadStatus
│   ├── test_qbittorrent_client.py  # qBittorrent client unit tests
│   ├── test_transmission_client.py # Transmission client unit tests
│   ├── test_nzbget_client.py       # NZBGet client unit tests
│   ├── test_sabnzbd_client.py      # SABnzbd client unit tests
│   ├── test_handler.py     # ProwlarrHandler unit tests
│   ├── test_torrent_utils.py   # Bencode, hash extraction, URL parsing
│   ├── test_bencode.py     # Bencode encoding/decoding
│   ├── test_source.py      # Release source (size parsing, format detection)
│   ├── test_cache.py       # Release cache
│   ├── test_integration_clients.py  # Integration tests (require Docker stack)
│   └── test_integration_handler.py  # Handler integration tests
│
└── README.md               # This file

Test Types

Unit Tests

Fast tests that mock external dependencies. Run these frequently during development.

uv run pytest tests/prowlarr/ -v -m "not integration"

What they test:

  • Download client logic (status mapping, URL handling, error cases)
  • Bencode encoding/decoding for torrent files
  • Hash extraction from magnet links and .torrent files
  • Protocol detection (torrent vs usenet)
  • Release cache operations
  • Handler download flow logic
  • User database (CRUD, settings, OIDC subject linking)
  • OIDC authentication (group claims, user provisioning, route handlers)
  • Admin user management API (create, update, delete, password, per-user settings)
  • Multi-user download queue filtering and per-user overrides
  • Settings configuration (OIDC fields, show_when conditions)

E2E Tests

Test the full application through its HTTP API. Require the app to be running.

uv run pytest tests/e2e/ -v -m e2e

What they test:

  • Health check endpoint
  • Configuration endpoint
  • Metadata provider search (Hardcover, etc.)
  • Release source listing
  • Download queue operations (add, cancel, reorder, clear)
  • Settings API
  • Prowlarr integration

Integration Tests

Test against real services (qBittorrent, Transmission, etc.). Require the full Docker test stack.

# Start the test stack first
docker compose -f docker-compose.test-clients.yml up -d

# Run integration tests
docker compose -f docker-compose.test-clients.yml exec shelfmark uv run pytest tests/prowlarr/ -v -m integration

What they test:

  • Real connections to download clients
  • Adding/removing actual torrents
  • Status polling from real clients

Test Markers

Marker Description When to Skip
integration Requires running services (qBittorrent, etc.) Default skip with -m "not integration"
e2e End-to-end API tests When app isn't running
slow Tests that take longer (network calls, polling) Quick feedback with -m "not slow"

Common Commands

# Run specific test file
uv run pytest tests/prowlarr/test_clients.py -v

# Run specific test class
uv run pytest tests/e2e/test_api.py::TestHealthEndpoint -v

# Run specific test
uv run pytest tests/e2e/test_api.py::TestHealthEndpoint::test_health_returns_ok -v

# Run with short traceback (cleaner output)
uv run pytest tests/ -v --tb=short -m "not integration"

# Run and stop on first failure
uv run pytest tests/ -v -x -m "not integration"

# Run with coverage (if pytest-cov installed)
uv run pytest tests/ --cov=shelfmark -m "not integration"

Writing New Tests

Unit Test Example

from unittest.mock import MagicMock, patch


class TestMyFeature:
    def test_something(self, monkeypatch):
        # Mock config values
        monkeypatch.setattr(
            "shelfmark.module.config.get",
            lambda key, default="": {"KEY": "value"}.get(key, default),
        )

        # Test your code
        result = my_function()
        assert result == expected

E2E Test Example

import pytest
from .conftest import APIClient, DownloadTracker


@pytest.mark.e2e
class TestMyEndpoint:
    def test_endpoint_works(self, protected_api_client: APIClient):
        resp = protected_api_client.get("/api/my-endpoint")
        assert resp.status_code == 200

    def test_with_cleanup(
        self,
        protected_api_client: APIClient,
        download_tracker: DownloadTracker,
    ):
        # Track IDs for automatic cleanup after test
        download_tracker.track("some-id")
        # ... test code ...

Test Fixtures

E2E Fixtures (tests/e2e/conftest.py)

Fixture Scope Description
api_client function Fresh HTTP client for general E2E calls
protected_api_client function Authenticated client for protected-route E2Es
download_tracker function Tracks downloads for cleanup
server_config session Cached server configuration

Prowlarr Fixtures (tests/prowlarr/conftest.py)

Fixture Scope Description
transmission_client module Real Transmission client (integration)
qbittorrent_client module Real qBittorrent client (integration)
deluge_client module Real Deluge client (integration)
nzbget_client module Real NZBGet client (integration)
sabnzbd_client module Real SABnzbd client (integration)

Expected Skips

Some tests skip when external services aren't available. This is normal:

  • "No metadata providers available" - Metadata provider not responding
  • "Prowlarr not configured" - Prowlarr settings not set up
  • "No releases found" - No indexers configured in Prowlarr
  • "Legacy search source unavailable" - Direct download source offline
  • "Transmission/qBittorrent not available" - Docker test stack not running

Troubleshooting

Tests can't connect to app

# Check the app/container is running
docker ps

# Check app logs
docker logs <your-shelfmark-container>

Import errors

# Sync the local Python environment first
uv sync --locked --extra browser

# Then run tests from the repo root
uv run pytest ...

Integration tests failing

# Make sure test stack is running
docker compose -f docker-compose.test-clients.yml up -d

# Check client containers
docker ps | grep -E "qbittorrent|transmission|deluge|nzbget|sabnzbd"

Stale test data

Restart the container to reset the in-memory queue between test runs:

docker restart <your-shelfmark-container>