mirror of
https://github.com/nlohmann/json.git
synced 2026-10-02 06:15:46 +01:00
cff0a613696d3fd33964930feba97d0c44cda16e
32
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Niels Lohmann
|
1d675cdb46 |
Fix CI jobs that check less than they claim; move arm64 to GitHub (#5733)
* Fix the ci_cmake_flags wiring so every option is checked
The CMake 3.31.6 flag list referred to itself before it was defined,
so only JSON_BuildTests was checked with that version. The targets for
the CMake running the build ("_2") were created but never added to
ci_cmake_flags, and the three versions shared one build directory.
JSON_StrictNulHandling was not in the list at all.
Use the 3.5.0 list for 3.31.6, add JSON_StrictNulHandling, and create
one ci_cmake_flag_<flag> target per option for the running CMake with
its own build directory. Also use the function parameter in the
COMMENT, refresh the stale version comment, and let ci_clean remove
the downloaded cmake-<version> directories instead of the long-gone
cmake-3.5.0-Darwin64.
Part of #5715
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix ci_test_clang_libcxx_cxx* jobs silently building without warnings
CMake only seeds CMAKE_CXX_FLAGS from the CXXFLAGS environment variable
when the cache entry is unset, so the explicit -DCMAKE_CXX_FLAGS="-stdlib=libc++"
argument made it ignore CXXFLAGS="${CLANG_CXXFLAGS}" entirely. The six
ci_test_standards_clang (..., libcxx) jobs therefore compiled without
-Weverything/-Werror while their libstdc++ siblings did use them.
Pass -stdlib=libc++ through the same CXXFLAGS value instead of a separate
-D argument, and give the target its own build directory
(build_clang_libcxx_cxx${CXX_STANDARD}) so it no longer shares a CMake
cache with the libstdc++ variant. Suppress the resulting
-Wthread-safety-negative finding from libc++'s std::mutex annotations,
which fires on doctest's reporters in this translation unit only.
Part of #5715
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Remove the no-op AppVeyor with_win_header job
The with_win_header matrix entry patched Windows.h into
single_include/nlohmann/json.hpp before building, but JSON_MultipleHeaders
has defaulted to ON since #3532 (2022-06), so CMakeLists.txt points the
tests at include/ and the patched single header is never compiled. The
job has been a no-op VS2015 build since then.
Windows.h coverage already exists through tests/src/unit-windows_h.cpp
(#3631), which runs in every MSVC job. Delete the dead matrix entry and
its before_build steps, and cite unit-windows_h.cpp from the QA page.
Part of #5715
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Remove unused ci_oclint and ci_pvs_studio targets
No workflow invokes ci_oclint, ci_pvs_studio, or their tool discovery.
ci_oclint also had a side effect on every JSON_CI configure: it copied
the single header into src_single/all.cpp and added an add_executable()
for it without EXCLUDE_FROM_ALL, so a plain build compiled a 1.2 MB
translation unit that only that unused target consumed. ci_pvs_studio
duplicates the Makefile's pvs_studio target, which is kept.
Also drop the duplicate --check-level=exhaustive flag passed twice to
the same ci_cppcheck invocation.
Part of #5715
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Stop Dependabot from proposing astyle bumps
astyle is deliberately pinned at 3.4.13 because newer versions reformat
unrelated lines and this version defines the formatting that
check_amalgamation.yml enforces. Without an ignore rule, Dependabot
keeps opening PRs for every new astyle release (most recently #4580,
#4942, #5445, #5448), each of which fails the amalgamation check and
gets closed unmerged.
Part of #5715
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Move Linux arm64 CI from dead Cirrus CI to ubuntu-24.04-arm
Cirrus CI stopped reporting check runs on develop sometime after
|
||
|
Niels Lohmann
|
35802e78d6 |
Remove dead Makefile targets; document macro_builder; tidy serve_header (#5735)
* Remove dead doctest help entry and pretty_format target from Makefile The top-level Makefile still carried three leftovers: - The help text listed a "doctest" target that was removed in #4560, so "make doctest" fails with "No rule to make target". The example check now runs as "make check_output -C docs". - "pretty_format" ran clang-format on all sources, but .clang-format was deleted in #4573, so the target reformatted everything in the default LLVM style, against the Artistic Style formatting that "make pretty" applies and CI enforces. - "clean" removed benchmarks/files/numbers/*.json, a directory that no longer exists since the benchmarks moved to tests/benchmarks (#3462). Only maintainer tooling changes; the library is not affected. Part of #5717 Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Document tools/macro_builder and tidy up serve_header.py tools/macro_builder generates the NLOHMANN_JSON_EXPAND, NLOHMANN_JSON_GET_MACRO and NLOHMANN_JSON_PASTE* macros in macro_scope.hpp, but nothing referred to it. Add a README that explains what it generates, how to run it and where the output goes, and which dependent tables (NLOHMANN_JSON_DOUBLE_PASTE, NLOHMANN_JSON_TYPE_BODY) are maintained by hand. Point to it from a comment above NLOHMANN_JSON_EXPAND. The generator itself is unchanged; following the README reproduces the header byte for byte. In serve_header.py, drop the LGTM suppression (LGTM.com shut down in 2022), replace the """.""" placeholder docstrings with real ones, and import socket and ssl at module level. DualStackServer.server_bind uses socket, which was only imported under __main__; when the module was imported instead, the NameError was swallowed and IPV6_V6ONLY was not cleared. The header change is a comment only; behavior, API and ABI are unchanged. Part of #5717 Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Hash every release_files artifact, not a hardcoded subset The `release` target signed and copied json_fwd.hpp into release_files alongside json.hpp, but the shasum line that writes hashes.txt only listed json.hpp, include.zip and json.tar.xz. Users could not verify the published json_fwd.hpp against hashes.txt. Hash every file in release_files except the .asc signatures instead of naming files by hand, so a newly shipped header (such as the json_literals.hpp that #5610 adds to this target) cannot be missed again. Only affects the generated hashes.txt release artifact; the library itself is unaffected. Overlaps #5610, which touches the same lines to add json_literals.hpp to the release target. #5717 item 1 Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Remove the broken fuzz_testing* Makefile targets fuzz_testing and fuzz_testing_{bon8,bson,cbor,msgpack,ubjson} seeded fuzz-testing/testcases from tests/data, which was removed in |
||
|
Niels Lohmann
|
04f6ddd227 |
Keep external headers as #include when amalgamating (#5615)
A header that builds on json.hpp (such as the planned json_view.hpp) must not inline json.hpp: its single-header version would contain a second copy of the library, and that copy would change with every library change. The optional config key "external" lists include paths that are kept as #include directives. Only the first directive per path is kept; repeated ones are commented out, as the tool already does for inlined headers. config_json_view.json uses it for json_view.hpp; the existing configs do not set it, and json.hpp and json_fwd.hpp regenerate byte-identically. Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
Niels Lohmann
|
1e44262091 |
Make JSON_STRICT_NUL_HANDLING part of the ABI tag (#5560)
* Make JSON_STRICT_NUL_HANDLING part of the ABI tag JSON_STRICT_NUL_HANDLING (#5534) changes the bodies of inline functions: the lexer's handling of '\0' and input_adapter() for char arrays. So translation units compiled with and without it define the same functions differently, an ODR violation - the case the ABI tag exists for, as with JSON_BRACE_INIT_COPY_SEMANTICS (_bics). It now appends _snul to the inline namespace. The macro is new in 3.13.0, so no existing namespace changes. Its default moves to abi_macros.hpp, and it is only #undef'd without JSON_TEST_KEEP_MACROS, as for the other ABI macros. The ABI config tests, the namespace docs, the macro's docs and the Natvis file cover the new tag. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Amalgamate Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
Niels Lohmann
|
abbe52d6de |
Add JSON_PRECISE_STREAM_POSITION to leave the character that terminates a number in the stream (#5344)
* docs: qualify the operator>> stream positioning guarantee operator>>'s notes state that it leaves the stream positioned right after the parsed value, so that concatenated JSON values can be read back to back. That does not hold when the value is a number: a number is only terminated by the character that follows it, and the lexer's unget() is simulated (it rewinds only the lexer's own bookkeeping), so that character stays consumed from the stream. Document the actual behaviour: the guarantee holds for all value types except numbers, which must be followed by whitespace. Also qualify the cross-reference on the JSON Lines page, which repeated the unqualified claim. Documentation only; the behaviour itself is tracked in #5340. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * fix: restore the character that terminates a number (#5340) operator>> is documented to leave the stream positioned right after the parsed value, so that concatenated JSON values can be read back to back. That did not hold for numbers: a number is only terminated by the character following it, and lexer::scan_number() reads that character and calls unget() -- which is simulated and rewinds only the lexer's own bookkeeping. input_stream_adapter consumes via sbumpc() with no matching sungetc(), so the terminating character stayed consumed and the next extraction started one byte too late ('1true' left the stream at 'rue'). Propagating unget() to the adapter directly does not work: next_unget makes the following get() replay the cached character, so the terminator would be delivered twice. Instead, restore the still-pending character once at the end of a non-strict parse, where the input is handed back to the caller: - input_stream_adapter gains unget_character() (sungetc()) and advertises it via supports_unget, detected the same way as supports_seek. - lexer::restore_pending_unget() turns a pending simulated unget of a real (non-EOF) character into a real one and clears next_unget so the character is not also replayed. It is a no-op for adapters that cannot unget, and reports failure when sungetc() fails, in which case the input is left as it was before. - parser calls it on the three non-strict paths, i.e. for operator>> and sax_parse(strict = false). Strict parse()/accept() are unaffected: they require the input to end after the value, so the character is consumed by the end-of-input check anyway. Parse error messages and reported positions are unchanged. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * tests: fix CI failures in the #5340 test helpers Four CI failures, all in the new test code: - GCC (-Werror=useless-cast): drop the `json(...)` wrapper around `json::parse(...)`, which already returns a `json`. - GCC (-Werror=unused-result): assign the discarded `json::parse()` result to a dummy, the idiom used elsewhere in the test suite, and catch `json::parse_error&` for consistency. - clang-tidy (google-default-arguments): remove the default argument from the `pbackfail()` override; `sungetc()` supplies the base declaration's default. - MSVC (bad allocation): `no_putback_streambuf::underflow()` set a one-character get area without advancing `m_pos`, so an implementation whose `istream::get` peeks before it bumps re-read the same character forever. Keep no get area at all: `underflow()` peeks, `uflow()` consumes, and `sungetc()` still always lands in `pbackfail()`, which is what the test needs. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * fix: leave the character that terminates a number in the input Read the character following a number without consuming it, instead of consuming it and putting it back. input_stream_adapter now peeks with sgetc() and only steps over the character when the next one is requested or when the adapter is destroyed, so releasing it cannot fail - no putback position is required from the streambuf. Suggested by gregmarr in #5344. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: match the version history wording to the peek-based fix Signed-off-by: Niels Lohmann <mail@nlohmann.me> * docs: drop the whitespace-separator caveat from the parsing pages The caveat added in #5343 describes the behavior this branch fixes: a number no longer consumes the character that terminates it, so concatenated values need no separator. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * refactor: split the strict and non-strict paths in parser Folding the release_lookahead() call into the existing strict check left the "in strict mode" comment on an else-if branch, and made the strict condition in sax_parse() redundant with the branch it followed. Signed-off-by: Niels Lohmann <mail@nlohmann.me> * Put the stream position fix behind JSON_PRECISE_STREAM_POSITION Leaving the character that terminates a number in the stream is observable: reading "1,2,3" with repeated operator>> works today only because the comma after each number is swallowed, and std::getline after a number skips the line break. Both break with the fix, so make it opt-in for 3.x, as suggested by @gregmarr in the review. - JSON_PRECISE_STREAM_POSITION (default 0) selects the peek-based input_stream_adapter. Without it, the adapter is the consuming one from develop and has no supports_lookahead, so lexer::release_lookahead() and the parser's calls to it compile to nothing. - The macro changes input_stream_adapter's layout and member functions, so it gets the ABI tag _psp, after _bics. The ABI config tests, the natvis generator, and nlohmann_json.natvis (regenerated) know the tag. - The tests for the fix move to unit-precise-stream-position.cpp, which defines the macro itself and runs in every build, and gain the two cases above. unit-deserialization.cpp pins the default behavior instead. - The docs describe the default behavior again and point to the new macro page; version history says "added in 3.13.0, planned default in 4.0.0". Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
|
Niels Lohmann
|
2e91641de2 |
Test JSON_BRACE_INIT_COPY_SEMANTICS for real, and fix one-element tuples under it (#5544)
* Test JSON_BRACE_INIT_COPY_SEMANTICS for real, and fix one-element tuples under it
The opt-in JSON_BRACE_INIT_COPY_SEMANTICS was never exercised by CI:
- Its only test, in unit-regression3.cpp, was guarded by
`#if defined(JSON_BRACE_INIT_COPY_SEMANTICS)` after the #include. The
header #undefs the macro unconditionally in macro_unscope.hpp, so the
guard was always false and the test compiled to nothing, whatever -D
flag was passed.
- The ci_test_brace_init_copy_semantics target that passes the flag was
not named by any workflow.
Move the test into its own translation unit that defines the macro before
including the header, as unit-diagnostics.cpp does for JSON_DIAGNOSTICS.
It now runs in every CI job and for every standard. Remove the unused
target: it ran the whole suite with the macro, and that suite deliberately
relies on default brace-init semantics in about 90 places
(e.g. `json({1})` meaning `[1]`), so it could never pass.
Running the whole suite with the macro did find one library bug:
to_json for std::tuple builds `j = { std::get<Idx>(t)... }`, so with copy
semantics a one-element tuple became its element. `json(std::tuple<int>{5})`
was `5` instead of `[5]`, and `get<std::tuple<int>>()` threw type_error.302
on the result. Under the macro, a one-element tuple now builds exactly what
the default deduction builds. Without the macro nothing changes.
The new tests also pin that the library's other conversions produce the
same values with and without the macro. The macro page now says that the
macro affects every single-element list (`json j = {1}` is `1`), and that
all translation units must agree on it, since it has no ABI tag.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Make JSON_BRACE_INIT_COPY_SEMANTICS part of the ABI tag
The macro changes the body of the initializer-list constructor and adds a
to_json_tuple_impl overload, both with the same mangled names in either
mode, so mixing translation units silently picked one definition. Encode
it in the inline namespace as `_bics`, as JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON
does with `_ldvcmp`. The macro is new in the unreleased 3.13.0, so no
existing namespace name changes.
- Move the macro's default into abi_macros.hpp so json_fwd.hpp computes
the same namespace, and keep it defined under JSON_TEST_KEEP_MACROS.
- Check the tag in the ABI config tests and in the unit test.
- List `_bics` (and the missing `_dp`) in the namespace docs and in the
natvis generator; regenerate nlohmann_json.natvis.
- Replace the "define it consistently" warning with an ABI note.
Suggested by @gregmarr in the review of #5544.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix the cppcheck, clang-tidy and legacy-comparison CI failures
- to_json_tuple_impl() moved the element in both branches of a ternary;
only one runs, but cppcheck reported accessMoved. Use if/else.
- The ABI tag test looked for "json_abi_bics", which misses when another
tag comes first, as in json_abi_ldvcmp_bics; look for "_bics".
- readability-qualified-auto in the items() test.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
|
||
|
Niels Lohmann
|
bc066c1838 |
Make serve_header.py listen on localhost and limit its CORS header (#5564)
Without a bind address in serve_header.yml, the server listened on all interfaces, so any machine on the network could fetch the header and trigger make runs in the working trees. It now listens on localhost unless configured otherwise; bind: null restores the old behavior. The header was also sent with Access-Control-Allow-Origin: *, letting any web page read it. CORS is only needed because Compiler Explorer downloads #include <https://...> headers in the browser, so the header now goes only to https://godbolt.org and https://compiler-explorer.com, configurable with cors_origins. Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
 SamareshSingh
|
0422165315 |
Handle 'moved' events in serve_header.py (#4997)
Fixes #3659 I was testing serve_header.py with my local development setup and noticed that when I moved directories into or out of the monitored root, they weren't being picked up properly. The script would only detect create and delete events but not move operations. This was happening because the on_any_event handler only checked for 'created' and 'deleted' events on directories. Move events have a separate event type 'moved' that includes both the source and destination paths. The fix treats a move event like a combination of delete (for the source) and create (for the destination) - we rescan to remove any trees that were moved out, and add the destination directory to check for new trees that were moved in. This should make the development workflow smoother when reorganizing project directories while the server is running. Signed-off-by: Samaresh Kumar Singh <ssam3003@gmail.com> |
||
 dependabot[bot]
|
2eb21b0eb0 |
⬆️ Bump pyyaml from 6.0.2 to 6.0.3 in /tools/serve_header (#4932)
Bumps [pyyaml](https://github.com/yaml/pyyaml) from 6.0.2 to 6.0.3. - [Release notes](https://github.com/yaml/pyyaml/releases) - [Changelog](https://github.com/yaml/pyyaml/blob/6.0.3/CHANGES) - [Commits](https://github.com/yaml/pyyaml/compare/6.0.2...6.0.3) --- updated-dependencies: - dependency-name: pyyaml dependency-version: 6.0.3 dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
 co63oc
|
44bee1b138 |
chore: fix typos (#4921)
Signed-off-by: co63oc <co63oc@users.noreply.github.com> |
||
|
Niels Lohmann
|
9110918cf8 |
Fix typos (#4748)
* ✏️ fix typos Signed-off-by: Niels Lohmann <mail@nlohmann.me> * ✏️ address review comments Signed-off-by: Niels Lohmann <mail@nlohmann.me> * ✏️ address review comments Signed-off-by: Niels Lohmann <mail@nlohmann.me> --------- Signed-off-by: Niels Lohmann <mail@nlohmann.me> |
||
  bitFiedlerandMatthias Popp
|
7abcb5e9a7 |
fixes issue 4691 (#4693)
* bugfix removeprefix not available in python version < 3.9 there was a problem in my cLion gdb that comes with python version 3.8. the pretty printer script do not work because the removeprefix function is added in version 3.9. therefore we need a fix for that. Signed-off-by: Matthias Popp <mpopp@arri.at> * fix indentation, use the same indentation size at in class JsonValuePrinter the indentation size was a mix up, we should use always the same indentation size of 4 Signed-off-by: Matthias Popp <mpopp@arri.at> * use prefix as variable easier handling or easier to change Signed-off-by: Matthias Popp <mpopp@arri.at> * add variables for easier access Signed-off-by: Matthias Popp <mpopp@arri.at> --------- Signed-off-by: Matthias Popp <mpopp@arri.at> Co-authored-by: Matthias Popp <mpopp@arri.at> |
||
|
dependabot[bot]
|
f506d8acc7 |
⬆️ Bump jinja2 from 3.1.5 to 3.1.6 in /tools/generate_natvis (#4680)
Bumps [jinja2](https://github.com/pallets/jinja) from 3.1.5 to 3.1.6. - [Release notes](https://github.com/pallets/jinja/releases) - [Changelog](https://github.com/pallets/jinja/blob/main/CHANGES.rst) - [Commits](https://github.com/pallets/jinja/compare/3.1.5...3.1.6) --- updated-dependencies: - dependency-name: jinja2 dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
Niels Lohmann
|
26cfec34be | Clean up and document project files (#4560) | ||
|
Niels Lohmann
|
6057b31df7 |
Overwork astyle call (#4573)
* 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * Use ubuntu-latest image to run Valgrind (#4575) * 🔧 use Clang image to run valgrind * 🔧 use Clang image to run valgrind * 🔧 use Clang image to run valgrind * 🔧 use Ubuntu image to run valgrind * Use Clang image to run iwyu (#4574) * 🔧 use Clang image to run iwyu * 🔧 use Clang image to run iwyu * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🔧 overwork astyle call * 🎨 format code * 🔨 clean up |
||
|
dependabot[bot]
|
9e23b5d61e | ⬆️ Bump watchdog from 2.1.7 to 6.0.0 in /tools/serve_header (#4542) | ||
|
dependabot[bot]
|
7cfbe321be | ⬆️ Bump pyyaml from 6.0 to 6.0.2 in /tools/serve_header (#4541) | ||
 Griffin Myers
|
b36f4c477c |
Update natvis to reflect 3.11.3 and the current structure of basic_json (#4451)
* Update natvis Jinja template to reflect the current structure of basic_json.
In
|
||
 Yuanhao Jia
|
01da82eae2 | Fix gdb pretty printer (#4343) | ||
 Felix Yan
|
da92c0e3e7 | Correct a typo in serve_header/README.md (#4143) | ||
 Finkman
|
da6b908c4f | PrettyPrinter: Check if match is valid before accessing group (#3920) | ||
|
Niels Lohmann
|
349e4b310e |
Fix natvis XML (#3863)
* 🐛 fix natvis XML * 🐛 fix natvis XML |
||
|
Niels Lohmann
|
f7973f46d6 | Use official Clang/GCC containers (#3703) | ||
 Florian Albrechtskirchinger
|
32bbd38072 | generate_natvis.py: validate version number; cleanup (#3698) | ||
|
Florian Albrechtskirchinger
|
c0dae0f510 | Add Python script for generating Natvis file and update file for 3.11.2 (#3697) | ||
|
Florian Albrechtskirchinger
|
0e61ee8b07 | Restructure inline namespace and allow version component to be disabled (#3683) | ||
|
Florian Albrechtskirchinger
|
231f3108ff |
Amalgamate the forward declaration header (#3679)
* Amalgamate the forward declaration header * Update CONTRIBUTING and PULL_REQUEST_TEMPLATE * Update documentation |
||
|
Florian Albrechtskirchinger
|
8eee62d388 |
Miscellaneous small fixes (#3643)
* serve_header: suppress lgtm warning * serve_header: fix exit code * serve_header: replace deprecated ssl.wrap_socket() * Add checks to unit test readme * Add lgtm configuration file |
||
|
Florian Albrechtskirchinger
|
d909f80960 |
Add versioned, ABI-tagged inline namespace and namespace macros (#3590)
* Add versioned inline namespace Add a versioned inline namespace to prevent ABI issues when linking code using multiple library versions. * Add namespace macros * Encode ABI information in inline namespace Add _diag suffix to inline namespace if JSON_DIAGNOSTICS is enabled, and _ldvcmp suffix if JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON is enabled. * Move ABI-affecting macros into abi_macros.hpp * Move std_fs namespace definition into std_fs.hpp * Remove std_fs namespace from unit test * Format more files in tests directory * Add unit tests * Update documentation * Fix GDB pretty printer * fixup! Add namespace macros * Derive ABI prefix from NLOHMANN_JSON_VERSION_* |
||
|
Niels LohmannandFlorian Albrechtskirchinger
|
527da54dcb |
Use REUSE framework (#3546)
* 📄 add licenses * 👷 add REUSE compliance check * 📝 add badge for REUSE Co-authored-by: Florian Albrechtskirchinger <falbrechtskirchinger@gmail.com> |
||
|
Florian Albrechtskirchinger
|
0c698b75cc | Add serve_header.py for rapid testing on Compiler Explorer (#3456) | ||
|
Niels Lohmann
|
b21c345179 |
Reorganize directories (#3462)
* 🚚 move files * 🚚 rename doc folder to docs * 🚚 rename test folder to tests |