* Add BON8 support
Add to_bon8/from_bon8 and input_format_t::bon8 for BON8, a binary format
that uses the byte values that cannot begin a UTF-8 character as type
markers, so strings need no length prefix. It is the most compact of the
supported binary formats on the benchmark files.
The reader is non-recursive like the other binary readers. A string ends
at the first byte that cannot continue it, so the reader hands the one or
two bytes it reads past a string back to the value that follows. The
writer produces the canonical representation of the specification, except
for NFC normalization; its output is identical to that of the reference
implementation (HikoGUI) on all files of the test data.
The round-trip tests need the .bon8 files of json_test_data 3.2.0.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Address review comments
- Reuse detail::validate_one_utf8 to check strings in to_bon8; the error
now names the first byte of the invalid sequence.
- Document that to_bon8 leaves bytes in the output adapter on an
exception, and that string_open is only an output of write_bon8_marker.
- Explain why the pushback buffer of the BON8 reader cannot overflow.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Select the BON8 float prefix by type
get_bon8_float_prefix only depends on the type of its argument, so make
the type a template parameter instead of passing an unused value.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Rename a test variable that Flawfinder mistakes for read()
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix the BON8 CI failures
- compare the float in write_bon8_float with number_float_t constants,
so GCC does not warn about a float-to-double conversion
- mark check_bon8_utf8's context as used when exceptions are disabled
- choose the compact float prefix in a helper rather than with nested
conditional operators (clang-tidy)
- use auto for the cast in the BON8 integer reader (clang-tidy)
- write the int32 minimum test values as long long literals (MSVC C4146)
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Amalgamate
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Read BON8 strings in bulk from contiguous input
- copy the valid UTF-8 of a string in one step when the input is
contiguous (twitter.json is read in 1.68 instead of 2.52 ms,
jeopardy.json in 196 instead of 297 ms, close to CBOR and MessagePack)
- share the new valid_utf8_prefix() with the writer's UTF-8 check, which
now skips ASCII 8 bytes at a time
- let the fuzzer check that contiguous and stream input give the same
value or error, and test both paths in the unit tests
- clarify that a second 0xFF after a string is an empty string
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Link the BON8 functions from the other binary format pages
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Name the bulk scan flag after the input, not BON8
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Read BSON keys in bulk from contiguous input
BSON keys (and array indices) are C-style strings, which were read byte
by byte. For contiguous input they are now read up to their \x00-byte in
one step, using the same bulk_scan flag as BON8 strings: twitter.json is
read in 1.46 instead of 2.01 ms, citm_catalog.json in 2.93 instead of
3.33 ms, jeopardy.json in 182 instead of 207 ms. canada.json, whose keys
are almost all one-digit array indices, takes 2 % longer.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix the BON8 CI failures of the bulk-read tests
- skip the contiguous-versus-stream tests of BON8 strings and BSON keys
when exceptions are disabled: they catch the parse errors of invalid
input, and without exceptions the library aborts instead
- use static_cast for the int64 test value (google-readability-casting)
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Move the explicit basic_json instantiation into its own test file
Linking test-regression3_cpp20 with clang and MinGW failed with
"relocation truncated to fit: IMAGE_REL_AMD64_REL32 against `.rdata'",
as test-regression2 did before #5511. The explicit instantiation of
basic_json<> for #4825 compiles every member function, including the
BON8 reader and writer, into that object, and it was already close to
the limit (2,226,104 bytes on develop, 2,234,960 with BON8; clang -O1,
C++20).
Give the instantiation a file of its own: unit-regression3 is now
1,594,736 bytes and unit-explicit_instantiation 1,095,064. The new file
mentions JSON_HAS_CPP_17 and JSON_HAS_CPP_20 so it keeps being built
for the C++17 standard the regression was about.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Convert the bytes of the BON8 test strings explicitly
The str() helper constructed a std::string from a byte range, which
converts each unsigned char implicitly; -fsanitize=integer reports that
for bytes of 0x80 and above (ci_test_clang_sanitizer).
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Document the benchmarks, and make them build and compare versions again
The benchmark project hasn't configured since #4793: download_test_data.cmake
compiles cmake/detect_libcpp_version.cpp relative to CMAKE_SOURCE_DIR, which
is tests/benchmarks when that is the top-level project, so try_run fails and
so does `make run_benchmarks`. The path is now relative to the module itself,
which is the same file for the main build.
The Dump benchmark discarded dump()'s result, which is [[nodiscard]] by now;
it warned, and left the optimizer free to shorten the loop. The result is
now kept with benchmark::DoNotOptimize.
A new cache variable, JSON_BENCHMARK_INCLUDE_DIR, names the directory holding
the nlohmann/json.hpp to benchmark (single_include by default, as before),
so the same benchmarks can be built against two versions and compared.
tests/benchmarks/README.md documents what is measured, how to build and run
the benchmarks, how to read the output, and how to compare two versions with
Google Benchmark's compare.py; it recommends doing so by hand before a
release rather than in CI.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Point ci_benchmarks at tests/benchmarks
The target has configured ${PROJECT_SOURCE_DIR}/benchmarks since it was
added in #2561, but the benchmarks live in tests/benchmarks.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Pin Google Benchmark to release 1.9.5
The benchmarks fetched Google Benchmark's main branch, so two builds on
different days could measure with different library code, and CMake 3.30
and later warn that the single-argument FetchContent_Populate() is
deprecated. Fetch the 1.9.5 release archive, verified by its SHA-256,
with FetchContent_MakeAvailable() instead. That needs CMake 3.14; Google
Benchmark itself already needed 3.13.
Its -Werror is switched off, so a newer compiler's new warnings cannot
break the pinned release, and its install rules are no longer added.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* support UBJSON-derived Binary JData (BJData) format
* fix Codacy warning
* partially fix VS compilation errors
* fix additional VS errors
* fix more VS compilation errors
* fix additional warnings and errors for clang and msvc
* add more tests to cover the new bjdata types
* add tests for optimized ndarray, improve coverage, fix clang/gcc warnings
* gcc warn useless conversion but msvc gives an error
* fix ci_test errors
* complete test coverage, fix ci_test errors
* add half precision error test
* fix No newline at end of file error by clang
* simplify endian condition, format unit-bjdata
* remove broken test due to alloc limit
* full coverage, I hope
* move bjdata new markers from default to the same level as ubjson markers
* fix ci errors, add tests for new bjdata switch structure
* make is_bjdata const after using initializer list
* remove the unwanted assert
* move is_bjdata to an optional param to write_ubjson
* pass use_bjdata via output adapter
* revert order to avoid msvc 2015 unreferenced formal param error
* update BJData Spect V1 Draft-2 URL after spec release
* amalgamate code
* code polishing following @gregmarr's feedback
* make use_bjdata a non-default parameter
* fix ci error, remove unwanted param comment
* encode and decode bjdata ndarray in jdata annotations, enable roundtrip tests
* partially fix ci errors, add tests to improve coverage
* polish patch to remove ci errors
* fix a ndarray dim vector condition
* fix clang tidy error
* add sax test cases for ndarray
* add additional sax event tests
* adjust sax event numbering
* fix sax tests
* ndarray can only be used with array containers, discard if used in object
* complete test coverage
* disable [{SHTFNZ in optimized type due to security risks in #2793 and hampered readability
* fix ci error
* move OutputIsLittleEndian from tparam to param to replace use_bjdata
* fix ci clang gcc error
* fix ci static analysis error
* update json_test_data to 3.1.0, enable file-based bjdata unit tests
* fix stack overflow error on msvc 2019 and 2022
* use https link, update sax_parse_error after rebase
* make input_format const and use initializer
* return bool for write_bjdata_ndarray
* test write_bjdata_ndarray return value as boolean
* fix ci error
Niels Lohmann
hitgirlandHitgirl
Qianqian Fang
Jun Jie
chenguoping