* Make JSON_STRICT_NUL_HANDLING part of the ABI tag
JSON_STRICT_NUL_HANDLING (#5534) changes the bodies of inline functions:
the lexer's handling of '\0' and input_adapter() for char arrays. So
translation units compiled with and without it define the same functions
differently, an ODR violation - the case the ABI tag exists for, as with
JSON_BRACE_INIT_COPY_SEMANTICS (_bics). It now appends _snul to the inline
namespace. The macro is new in 3.13.0, so no existing namespace changes.
Its default moves to abi_macros.hpp, and it is only #undef'd without
JSON_TEST_KEEP_MACROS, as for the other ABI macros. The ABI config tests,
the namespace docs, the macro's docs and the Natvis file cover the new tag.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Amalgamate
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: qualify the operator>> stream positioning guarantee
operator>>'s notes state that it leaves the stream positioned right
after the parsed value, so that concatenated JSON values can be read
back to back. That does not hold when the value is a number: a number
is only terminated by the character that follows it, and the lexer's
unget() is simulated (it rewinds only the lexer's own bookkeeping),
so that character stays consumed from the stream.
Document the actual behaviour: the guarantee holds for all value types
except numbers, which must be followed by whitespace. Also qualify the
cross-reference on the JSON Lines page, which repeated the unqualified
claim.
Documentation only; the behaviour itself is tracked in #5340.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* fix: restore the character that terminates a number (#5340)
operator>> is documented to leave the stream positioned right after the
parsed value, so that concatenated JSON values can be read back to back.
That did not hold for numbers: a number is only terminated by the
character following it, and lexer::scan_number() reads that character
and calls unget() -- which is simulated and rewinds only the lexer's own
bookkeeping. input_stream_adapter consumes via sbumpc() with no matching
sungetc(), so the terminating character stayed consumed and the next
extraction started one byte too late ('1true' left the stream at 'rue').
Propagating unget() to the adapter directly does not work: next_unget
makes the following get() replay the cached character, so the terminator
would be delivered twice. Instead, restore the still-pending character
once at the end of a non-strict parse, where the input is handed back to
the caller:
- input_stream_adapter gains unget_character() (sungetc()) and advertises
it via supports_unget, detected the same way as supports_seek.
- lexer::restore_pending_unget() turns a pending simulated unget of a
real (non-EOF) character into a real one and clears next_unget so the
character is not also replayed. It is a no-op for adapters that cannot
unget, and reports failure when sungetc() fails, in which case the
input is left as it was before.
- parser calls it on the three non-strict paths, i.e. for operator>> and
sax_parse(strict = false).
Strict parse()/accept() are unaffected: they require the input to end
after the value, so the character is consumed by the end-of-input check
anyway. Parse error messages and reported positions are unchanged.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* tests: fix CI failures in the #5340 test helpers
Four CI failures, all in the new test code:
- GCC (-Werror=useless-cast): drop the `json(...)` wrapper around
`json::parse(...)`, which already returns a `json`.
- GCC (-Werror=unused-result): assign the discarded `json::parse()`
result to a dummy, the idiom used elsewhere in the test suite, and
catch `json::parse_error&` for consistency.
- clang-tidy (google-default-arguments): remove the default argument
from the `pbackfail()` override; `sungetc()` supplies the base
declaration's default.
- MSVC (bad allocation): `no_putback_streambuf::underflow()` set a
one-character get area without advancing `m_pos`, so an implementation
whose `istream::get` peeks before it bumps re-read the same character
forever. Keep no get area at all: `underflow()` peeks, `uflow()`
consumes, and `sungetc()` still always lands in `pbackfail()`, which
is what the test needs.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* fix: leave the character that terminates a number in the input
Read the character following a number without consuming it, instead of
consuming it and putting it back. input_stream_adapter now peeks with
sgetc() and only steps over the character when the next one is requested
or when the adapter is destroyed, so releasing it cannot fail - no
putback position is required from the streambuf.
Suggested by gregmarr in #5344.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: match the version history wording to the peek-based fix
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* docs: drop the whitespace-separator caveat from the parsing pages
The caveat added in #5343 describes the behavior this branch fixes: a
number no longer consumes the character that terminates it, so
concatenated values need no separator.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* refactor: split the strict and non-strict paths in parser
Folding the release_lookahead() call into the existing strict check left
the "in strict mode" comment on an else-if branch, and made the strict
condition in sax_parse() redundant with the branch it followed.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Put the stream position fix behind JSON_PRECISE_STREAM_POSITION
Leaving the character that terminates a number in the stream is observable:
reading "1,2,3" with repeated operator>> works today only because the comma
after each number is swallowed, and std::getline after a number skips the
line break. Both break with the fix, so make it opt-in for 3.x, as suggested
by @gregmarr in the review.
- JSON_PRECISE_STREAM_POSITION (default 0) selects the peek-based
input_stream_adapter. Without it, the adapter is the consuming one from
develop and has no supports_lookahead, so lexer::release_lookahead() and
the parser's calls to it compile to nothing.
- The macro changes input_stream_adapter's layout and member functions, so
it gets the ABI tag _psp, after _bics. The ABI config tests, the natvis
generator, and nlohmann_json.natvis (regenerated) know the tag.
- The tests for the fix move to unit-precise-stream-position.cpp, which
defines the macro itself and runs in every build, and gain the two cases
above. unit-deserialization.cpp pins the default behavior instead.
- The docs describe the default behavior again and point to the new macro
page; version history says "added in 3.13.0, planned default in 4.0.0".
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Test JSON_BRACE_INIT_COPY_SEMANTICS for real, and fix one-element tuples under it
The opt-in JSON_BRACE_INIT_COPY_SEMANTICS was never exercised by CI:
- Its only test, in unit-regression3.cpp, was guarded by
`#if defined(JSON_BRACE_INIT_COPY_SEMANTICS)` after the #include. The
header #undefs the macro unconditionally in macro_unscope.hpp, so the
guard was always false and the test compiled to nothing, whatever -D
flag was passed.
- The ci_test_brace_init_copy_semantics target that passes the flag was
not named by any workflow.
Move the test into its own translation unit that defines the macro before
including the header, as unit-diagnostics.cpp does for JSON_DIAGNOSTICS.
It now runs in every CI job and for every standard. Remove the unused
target: it ran the whole suite with the macro, and that suite deliberately
relies on default brace-init semantics in about 90 places
(e.g. `json({1})` meaning `[1]`), so it could never pass.
Running the whole suite with the macro did find one library bug:
to_json for std::tuple builds `j = { std::get<Idx>(t)... }`, so with copy
semantics a one-element tuple became its element. `json(std::tuple<int>{5})`
was `5` instead of `[5]`, and `get<std::tuple<int>>()` threw type_error.302
on the result. Under the macro, a one-element tuple now builds exactly what
the default deduction builds. Without the macro nothing changes.
The new tests also pin that the library's other conversions produce the
same values with and without the macro. The macro page now says that the
macro affects every single-element list (`json j = {1}` is `1`), and that
all translation units must agree on it, since it has no ABI tag.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Make JSON_BRACE_INIT_COPY_SEMANTICS part of the ABI tag
The macro changes the body of the initializer-list constructor and adds a
to_json_tuple_impl overload, both with the same mangled names in either
mode, so mixing translation units silently picked one definition. Encode
it in the inline namespace as `_bics`, as JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON
does with `_ldvcmp`. The macro is new in the unreleased 3.13.0, so no
existing namespace name changes.
- Move the macro's default into abi_macros.hpp so json_fwd.hpp computes
the same namespace, and keep it defined under JSON_TEST_KEEP_MACROS.
- Check the tag in the ABI config tests and in the unit test.
- List `_bics` (and the missing `_dp`) in the namespace docs and in the
natvis generator; regenerate nlohmann_json.natvis.
- Replace the "define it consistently" warning with an ABI note.
Suggested by @gregmarr in the review of #5544.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Fix the cppcheck, clang-tidy and legacy-comparison CI failures
- to_json_tuple_impl() moved the element in both branches of a ternary;
only one runs, but cppcheck reported accessMoved. Use if/else.
- The ABI tag test looked for "json_abi_bics", which misses when another
tag comes first, as in json_abi_ldvcmp_bics; look for "_bics".
- readability-qualified-auto in the items() test.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Match ABI tag order in namespace tests to abi_macros.hpp
NLOHMANN_JSON_ABI_TAGS concatenates the tags as _diag, _ldvcmp, _dp,
but the default and noversion ABI tests expected _diag, _dp, _ldvcmp.
The tests therefore failed whenever both JSON_DIAGNOSTIC_POSITIONS and
JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON were enabled, a combination
CI never exercises. Reorder the expectations to match the header.
Also document the _dp tag in the namespace feature page, which listed
only _diag and _ldvcmp.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
* Test the ABI namespace with all ABI tags enabled
Build the default and noversion ABI config tests a second time with
JSON_DIAGNOSTICS, JSON_DIAGNOSTIC_POSITIONS and
JSON_USE_LEGACY_DISCARDED_VALUE_COMPARISON all set, so the expected tag
order is checked on every test run instead of depending on which CMake
options a CI job happens to enable.
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
---------
Signed-off-by: Niels Lohmann <mail@nlohmann.me>
Niels Lohmann
Harinath Nampally
