Implementation of unused pattern bindings #2022, continued.
Whereas previous PR #6460 took care of parsing, and PR #6479 prepared
the stage by using _ in some test cases, this PR has the the actual
implementation, using a simple dataflow analysis.
---------
Co-authored-by: Burak Emir <bqe@google.com>
Co-authored-by: jonmeow <jperkins@google.com>
### Description
Mangling collisions occur when implementing interfaces with generic
parameters. The mangler does not use the specific id, causing the same
symbol `_C[FunctionName].[PackageName]:[InterfaceName].[PackageName]` to
be generated for all of the implementations below:
```carbon
// Generic interface parameters ignored
impl C as I(A)
impl C as I(B)
// Generic class parameters ignored
impl D(A) as I
impl D(B) as I
// Both ignored
impl D(A) as I(A)
impl D(B) as I(B)
```
### Changes
Updated the mangling logic for `SemIR::ClassDecl` and
`SemIR::InterfaceDecl` to include the specific id. Now the mangling
ensures unique symbols for generic implementations using the format:
`_C[FunctionName].[FunctionSpecificId].[PackageName]:[InterfaceName].[InterfaceSpecificId].[PackageName]`.
Closes#6498
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
This updates lower/testdata to use _ instead of proper names, in order
to avoid the "unused binding" warnings from #2022 which are being
implemented. These changes do not depend on the implementation which
should make everything easier to review.
See #6460 with part 1 of the implementation. It was split upon request
in order to make reviewing easier, the original state of the PR was
updating hundreds of test cases.
The PR has thus been split, part 2 including test cases changes can be
viewed at
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
... many tests need to be updated, so it seems best to get those tests
out of the way that are not interesting.
These are not all tests in lower/testdata - a few of them are
interesting in the sense that they cannot use '_' because it leads to
failed redeclaration check. This is exactly the scenario described in
#3763 which requires the 'unused' marker. Those are left untouched here
but are updated in
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
This adds just enough debug info for i32/int parameters and return
values, with a path forward for adding DWARF type metadata for other
types.
As it happens, return type information is carried separately from
parameter information:
* Return type information is carried in the `type` of the `DISubprogram`
(as a `DISubroutineType` - which does carry parameter type information
as well, but that's unused when the DWARF is emitted by LLVM)
* Parameter information is carried by `DILocalVariable`s with a non-zero
`arg` value (representing the order of function parameters)
In the absence of locations for the parameters (future work), nothing
would usually keep the `DILocalVariable` live/reachable when emitting
DWARF - so for cases where this can happen (for clang, this happens in
optimized builds where all references to the parameter variable might be
optimized away) the variables can be "retained" in a list on the
`DISubprogram` - achieved by passing `AlwaysPreserve` parameter to
`createParameterVariable` (adds them to a list, then that list gets
attached to the `DISubprogram` when it's finalized later)
For now, any unsupported types are emitted as `void*` (except void
return, which is implemented as void) as a placeholder.
Given this example:
```
import Core library "io";
class MyClass {
}
fn Unsupported(v: MyClass) {
}
fn Ret() -> i32 {
return 42;
}
fn Arg(x: i32) {
Core.Print(x);
}
fn Run() {
}
```
this is the resulting DWARF:
```
DW_TAG_compile_unit
DW_AT_name ("test.carbon")
DW_TAG_subprogram
DW_AT_name ("Unsupported")
DW_TAG_formal_parameter
DW_AT_type (0x00000066 "void *")
DW_TAG_subprogram
DW_AT_name ("Ret")
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Arg")
DW_TAG_formal_parameter
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Run")
DW_TAG_base_type
DW_AT_name ("int")
DW_TAG_pointer_type
```
And the debugger:
```
(gdb) p Ret()
$1 = 42
(gdb) p Arg(4)
4
$2 = void
```
I'm not sure if there's a way this logic should be merged with the logic
for making the `llvm::Function` type (which the `DISubroutineType`
building code was inspired by/copied from) - since they're done at
different times/places, I don't think there's an easy way to do it in
one pass, but maybe the code can be shared (even if it's run twice) in
some generic `SemIR::Function` type walker.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Every test that used `addr` before #6283 should be using `ref` after
this PR. In most cases that was done in #6283, but this PR transitions a
few that I missed in that first pass. In addition, #6283 cloned the old
`addr` tests from `foo.carbon` to `foo_addr.carbon` in order to maintain
test coverage during the transition; this PR removes those cloned tests.
This helps at least lldb handle calling functions (currently the debug
info describes every function as `void()`, so no parameters or return
values are supported) - seems gdb and lldb both depend on demangling to
varying degrees in C code (marking a function as "prototyped" in C in
DWARF does seem to also address this problem).
Given:
```
fn PrintThree() {
Core.Print(3);
}
```
Before:
```
(lldb) p PrintThree()
error: Couldn't look up symbols:
PrintThree
Hint: The expression tried to call a function that is not present in
the target, perhaps because it was optimized out by the compiler.
```
After:
```
(lldb) p PrintThree()
3
(lldb)
```
Give TupleLiteral and StructLiteral a constant value, if their contents
have constant values. Their constant values are TupleValue and
StructValue respectively. This supports their ability to convert to a
constant type (or facet type).
This way when deduce finds a TupleLiteral as the argument to a
_symbolic_ facet type, it can also find a constant value to use for that
argument. This allows deduction to move onto step two, where it can
substitute into the symbolic parameter from previous deduced arguments,
and then perform the conversion from the TupleValue to the desired facet
type.
Allow `PerformBuiltinConversion()` to convert from a canonical
TupleValue or StructValue to `type` instead of only from literals. Then,
also support conversion from a symbolic binding of type TupleType or
StructType to `type`.
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This proposal removes the definition of the term "value binding" as a
primitive
category conversion from reference to value, replacing it with the term
"value
acquisition". The other meaning of "value binding", a binding declared
by a
value binding pattern, is unchanged.
When deducing arguments for generic parameters of an `impl`, the
deduction calls `Convert` on the input arguments. Often, the input
argument is a facet, and needs to be converted to a type via
FacetAccessType in order to produce a different facet. These
instructions end up being added to the semir, but only their constant
values are needed for the resulting specific returned from Deduce.
In the best case, these extra instructions are just noise in the semir,
or they just cause instruction names to get differentiated with larger
suffixes.
In the worst case, these extra instructions contain references to
instructions from a generic context, and leak them out of that generic
context and into another. In particular, when importing a
LookupImplWitness instruction, the re-evaluation of it can do deduce
(when the lookup is against a generic `impl`). The instructions created
in Deduce are not part of the import, and end up referring to imported
instructions from the local context, which leads to confusion in the
toolchain, and can crash.
The `import_self_specific.carbon` test demonstrates this. It causes the
`I.F` function to be imported from the `I` interface when building the
witness table for the `impl`. Doing so imports the specific of `C` which
includes a LookupImplWitness for `Self.Accoc` in `I`. The `Self` is a
BindSymbolicName with generic binding index 0, in `I`. When Convert
creates instructions in the generic `impl forall D`, however, they end
up referencing and including this BindSymbolicName into its eval block.
But the generic binding 0 in the `impl` is a very different thing (a
value of type `E`). This confusion leads to crashes.
The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
The main direction of this change is the edits to `destroy.carbon`
(matching in both prelude and min_prelude).
Previously there was a no-op blanket impl for `Destroy`, which hid all
missing implementations of `Destroy`. This does a few things:
- Sets up builtin aggregate destruction for struct and tuple types as
before, but also adds C++ class types and array types to the same
handling. (all as a TODO for actual implementation)
- Also maybe-unformed destruction, for now at least. (there's a chance I
may try a different approach on this, but the impl lookup wasn't working
as I'd hope in order to write it in code)
- Adds handlers for simple things that are easy to do in code: `type`,
`bool`, pointers. (because these are no-op destruction)
- Redirect `const T` destruction to `T` destruction.
This leaves as future issues:
- `partial T` destruction. (this can't be done similar to `const`
because it only works for non-`final` class types; I think `class`
definitions should just generate what's needed)
- Destruction of other prelude-provided types. (will probably come up as
we implement class destruction, that the adapted builtin type doesn't
implement `Destroy` -- but may end up special-casing that in a way that
moots it)
This moves the `&` operator from `facet_types.carbon` to
`convert.carbon` because more things need to handle type and now that
we're getting separate copy and destroy interfaces. It should be
low-cost (an interface and builtin) so hopefully this is the right
balance for complexity and re-use.
A few tests are also edited in order to focus them more on what they
intend to test, and avoid a `Destroy` dependency.
Add `Dependent` value and initializing representations for types whose
representations are unknown because they are dependent. When generating
SemIR in such cases, use a worst-case initializing representation that
both provides a destination address and also propagates a potential
result value.
Use this to fix incorrect lowering and lowering crashes for specific
functions involving generic types that don't use a copy value
representation.
In lowering, be careful to distinguish between whether the initializing
representation for the generic return type uses a return slot (which
affects whether the SemIR declaration and call have one) and whether the
initializing representation for the specific return type uses a return
slot (which affects whether the LLVM IR declaration and call have one).
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This proposal renames the syntax used to mark an overriding definition
of a virtual method from `impl fn` to `override fn` to avoid ambiguity:
besides indicating an overriding virtual function, it can be parsed as
an "impl" declaration when the construct following "impl" begins with a
lambda introduced by "fn".
Closes#5711
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When returning a value from a function whose return type has a by-copy
initializing representation, perform initialization like we do when the
return type has an in-place initializing representation. This makes our
SemIR representation more uniform, as the return expression will now
always be an initializing expression rather than a value expression, but
more importantly it means that attempts to return a non-copyable type by
value now fail, even if the type has a by-copy initializing
representation.
This catches a bunch of places where we were returning a value of an
unconstrained template parameter `T:! type`, which we were incorrectly
allowing because we didn't notice it was not copyable. Unfortunately
this then requires quite a few test updates.
Like #6034, this exposes a lowering issue where lowering crashes when
attempting to lower a specific copy operation for certain types; a
couple more tests are temporarily disabled here. An upcoming PR
dependent on this one will fix the issue and re-enable those tests.
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This addresses/avoids the duplicate import of vtables.
I went through a few iterations/etc along the way and left them in the
commit
history for the PR in case any of them are useful to illustrate how I
got here,
or worth revisiting.
Essentially I ended up with a circularity in importing - importing the
class
imported the vtable_decl which imported the virtual functions - and then
pending
specifics of the virtual functions needed the self specific of the
enclosing
class which wasn't ready yet.
Adding ImportRef to the vtable_decl to break the cycle caused me trouble
when
naming the vtable_decl instructions - so I tried making the functions in
the
vtable unloaded ImportRefs instead. That worked, but meant that
importing a
class still was doing O(number of vtable entries) even if the vtable
wasn't
used.
So I revisited the lazy vtable_decl - figured out how to make the naming
work
(when building the vtable_ptr, even though the vtable_decl doesn't have
to be
loaded for the vtable_ptr, I force it to be loaded anyway, to load the
vtable so
it's usable by lowering, etc). And then I could go back to the old
non-lazy
loaded vtable entries (using some loaded ImportRefs in the cases where
we needed
them/had already adopted them).
Then thinking about the VtablePtr instruction, went back/forth on
exactly what
it needed - went from VtablePtr's member being a VtableDecl InstId, to a
ClassId, then back to a VtableId as it was before this patch.
Naming the instructions has one oddity, that the VtableDecl and
VtablePtr
instructions seem to need to add the pending name for the VtableId -
despite not
using the VtableId in their own name - should the inst namer be doing
this work
for parameters of instructions rather than requiring the inst to do it
deliberately? (or am I holding it wrong in some way?)
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
Some specific features:
* Use `SpecificFunction` for vtable entries for generic classes.
* Create specific constants for vtable entries in classes derived from
generic classes to reference the appropriate specific of the function
in the context of such a derived class.
* Create specific constants for vtable_ptrs for uses of specific generic
classes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This changes `Destroy` to use an interface for its implementation.
Note that this change includes a lot of test updates. Even when
`Destroy` is a no-op, it still causes code generation as part of
determining that.
Originally I was trying to use ranges to cut down the scope of this, and
to a degree I think they have. But a flipside here is that cases where
no destructors should be generated -- particularly globals -- would be
needed to completely remove destructor calls. Even for ranges, the range
can often include the destructor placement. So I've shifted
frame-of-thought a little: accept a bunch of destructor churn, because
destructors are needed and will be prevalent. The verbosity is a feature
of the design to make desugaring apparent in IR, not a bug.
The goal was/is to reduce the overhead for vtables in generics - the
previous representation/prior to this patch caused a new vtable to be
created in every specific which isn't generally what we want for Carbon
generics (the whole specific/generic thing is meant to avoid creating
specific versions for things that can be a generic form parameterized by
a specific instead of manifest as a unique entity per specific)
So this moves vtables to a top level object (like functions, classes,
etc). Each dynamic class will have a vtable in this list.
Classes have a `vtable_ptr` instruction in them that points to the
vtable.
The actual generic support hasn't been implemented in this patch, as
I've been struggling with just getting this part of the migration going
& wanted to get it flushed out before adding the additional
complications.
It's possible more laziness when doing cross-file importing would be
suitable - for instance if we only need to reference the vtable from
another file, but don't need to know its individual contents, it may be
beneficial for the functions in the vtable to be import_refs (or to add
another layer of indirection - so it can be a single import_ref
all-or-nothing for the functions in the vtable).
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Previously we created allocas for temporaries at whatever point in the
output LLVM function we'd reached. This would result in these being
dynamic allocas (performing a dynamic stack allocation), which is
inefficent and can lead to a stack overflow if it happens in a loop.
Switch to putting the allocas in the entry block instead, and instead
generate a lifetime start marker when we reach the point where the
temporary is introduced. We already did this for local variables; this
is just factoring out and reusing that code.
Update remaining parts of lowering, in particular the lowering of
aggregates, to handle lowering within a specific from a different file
than its generic. Look up information about a type in the current
specific and in its file rather than performing lookups for the type in
the generic and its file.
Remove or fix all remaining uses of raw `TypeId` in
lower/function_context and lower/handle*, so that the type from the
specific is consistently always used when lowering a specific function.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Adds min-preludes to a few more slowest tests, and adds them to most of
the lowering tests, with a few exceptions that make use of operators.
This take the runtime of file_test down from about 8s to about 7s on my
machine.
We add support for Negate on uints in the min-preludes.
This drops the wall clock time for running file_test from 10s to 8s on
my machine. There's many more tests to convert, as each one takes the
test from ~1s to ~100ms. Compiling the full prelude is a bit slow now
since #5653, and before that file_test was taking about 3.5s.
We introduce a few more flavours of min_prelude to support more tests.
When the binding pattern appears within a `var` pattern, convert to a
reference. Otherwise, convert to a value.
This gets the advent of code examples to produce the right answers again
:)
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Entities, such as `Function`s may be created during phase 2 and need to
read the `Class`'s `scope_id` at that point, so it must be made
available earlier (in phase 2, rather than 3) when importing.
(thanks @zygoloid for explaining this all to me)
I'll look into other instances of this 3 phase lookup to see if they
have
similar bugs/if I can create test cases to tickle them as follow-ups.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
- Track the `VarPattern` instruction on the `VarStorage` instruction so
that it's available for name mangling.
- Mangle global variables based on the first binding name within their
pattern.
- Give global variables external rather than internal linkage, except if
they have no bindings whatsoever in their pattern.
- To support lowering references to bindings nested within a global var,
such as for `var (x: i32, b: i32)`, add some basic initial support for
reference constant expressions. Treat a global `var` as a reference
constant, and treat an aggregate access into a reference constant as a
reference constant.
`IRBuilderBase::SetInsertPoint` weirdly replaces our debug location with
one copied from the new insertion point, so undo its damage after
calling it.
Also included: a couple of cleanups I made while tracking this down.
These will need to be emitted lazily, as we do for functions - this
addresses the crash/removes the impossible (because we don't have a
specific) non-lazy path.
Adds a `virtual_index` to `SemIR::Function` used to determine which
vtable slot
to use when calling the given function.
Then use that to lower the function call to use the vtable and
specifically the
relative vtable ABI to match the vtable entries.
Reuse LLVM global constants: do not generate a new llvm::Global constant
for a pointer to a global constant for the same Carbon const_inst_id,
reuse already generated one.
Adds a mapping to keep track of vtable LLVM IR decls/defs for use.
Adds the vtable_id to the vtable_ptr initialize instruction for lookup.
Adds emission of vtable declarations for use outside the file that
defines the vtable. (this isn't done lazily, it's done for any imported
class - it could be done lazily & maybe eventually has to be lazy to
handle generics)
One of the remaining three steps for proof-of-concept virtual function
lowering (the other two being: initializing vptrs to point to these
tables, and using the vptr+table at call sites).
Introduces a (placeholder?) mangling of vtables as ".$vtable" at the end
of the mangling of the class name.
Uses a scheme similar to clang's relative vtables - though those are
relative to the vtable slot, and this is relative to the start of the
vtable (seemed simpler? though I haven't looked at it in detail, perhaps
in lowering call sites I'll find the relative-to-vtable-slot is nicer,
easy enough to change).
Fixes#5186
With @zygoloid's kind assistance, this generalizes the existing
non-const lowering of ClassInit, that had previously only handled
InitializeFrom, to find other cases - such as a nested ClassInit used to
initialize a class member.
This refactors the `FindReturnSlotArgForInitializer` from
`check/convert.cpp` into `sem_ir/file.{h,cpp}` for use from lowering
(since lower doesn't depend on check, which I assume is an intentional
layering constraint - so figured it made sense to move it to sem_ir, and
found one or two similar-ish utility functions in `sem_ir/file.{h,cpp}`,
so figured that was a good spot)
Seems the instructions got emitted out of order & that caused problems
for lowering. This was because most of the initialization instructions
were added to a PendingBlock, but the vptr initialization instructions
were added to the (non-pending) block directly.
(I don't fully understand the pending stuff (is there a different test I
could/should write that demonstrates the vptr init instructions not
being discarded because they didn't go in the pending block (before this
patch)), or the out of order instruction problem (could we add more
robust checking for instruction ordering?) - but perhaps this is
adequate understanding for this bug fix at least)
Fixes#5094
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Geoff Romer
Özgür
Richard Smith
David BlaikieandDana Jansens
Elliott KaltandRichard Smith
Alina Sbirlea