This drops file_test runtime from about 2.5s to 2s on my machine, which
is now ~50% faster than before
https://github.com/carbon-language/carbon-lang/pull/5653 slowed things
down by adding a lot of stuff to the production prelude.
Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
This flows out of #5084 and trying to reduce UnsafeMake use. It turns
out imports and namespaces were using unexpected node kinds (previously
ImportIntroducer instead of ImportDecl, for example). This fixes and
adds validation.
I was uncertain about whether to just remove the is_convertible check,
since I don't see it as motivating creation of a conversion between
NodeIdOneOf types. So I've just left a TODO for now.
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This implements a few closely related features:
- Starts merging namespaces discovered inside imports.
- Stores results of cross-package name lookup as an entry inside the
scope.
- Note this is particularly visible with `i32`.
- Moves more of the imported instructions to the import scope.
Note this is primarily for executing the namespace TODO in check.cpp,
which is removed here.
`testdata/namespace/merging_with_indirections.carbon` tests key
behavior.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also adds import_ir_scope to namespace formatting. I'd done this as an
aid for #4153, and am splitting it out.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).
Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
This handles toolchain failures per-file. The intent is to allow placing
both "success" and "fail" tests in the same file, using splits. However,
this PR only adds support and updates existing tests to continue
passing.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Dana Jansens
Jon Ross-Perkins
Richard Smith
David BlaikieandJon Ross-Perkins
Brymer MenesesandJon Ross-Perkins
Jacob Schneider