Also add a default for `EqWith.NotEqual`.
Switch advent examples to use these named constraints, and also go
through all the other TODOs in the advent examples and fix the ones that
are trivially fixable now.
In Convert, we require the source value's type to be compete so that we
can look for `base` classes and `adapt` relationships. However these can
only be present in a `ClassType`, so we only need `ClassType`s to be
complete.
Reduce the requirement in Convert to not complete types that are not a
`ClassType`, and which can not contain a `ClassType` as part of their
class.
Ideally we would only _only_ require the `ClassType` itself to be
complete, and only if we're looking for a base or adapt. However lower
depends on us completing all Convert source types that contain a class.
This seems to suggest we're lacking checks for complete types somewhere
else and Convert is making up for it. A TODO has been added. The
`toolchain/driver/testdata/compile/optimize/optimize_debug.carbon` test
is an example that CHECKs due to failing to verify the LLVM module if we
do not compute the complete type of all class-containing types in
Convert.
The critical step this PR is doing is to stop trying to complete a
`FacetType` when converting from a facet. This avoids trying to complete
a named constraint when converting `Self` inside that named constraint.
Doing so causes a cycle when the conversion of `Self` is performed in
eval of an `extend require` decl, since requiring the named constraint
to be complete re-evaluates the `extend require` decl again. A test is
added that crashed in an infinite loop before this change.
It also depends on #7584, which was intended to be an optimization but
is now load bearing. Because converting `Self` leaves an impl lookup
inst behind, and if that inst is re-evaluated inside impl lookup (by
forming a specific of a `require` decl through identify) then we have a
similar cycle.
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.
For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.
Implementation details for each component:
- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
produce cascading errors.
The removed `:!` syntax is now rejected as an ordinary parse error.
The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.
Assisted-by: Claude Code
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Implements proposal #7016: `self` moves from the deduced implicit list
(`fn F[self: Self]()`) to the front of the explicit list. Its type may
be written explicitly (`fn F(self: Self)`) or omitted, in which case it
defaults to `Self` (`fn F(self)`, `fn F(ref self)`); `self` in the
implicit list is rejected.
Throughout checking, `self` is modeled as the first explicit parameter.
Because a method is just a function whose first parameter is `self`, it
can also be called as an ordinary function with the receiver passed
explicitly (`Type.M(obj, ...)`), not only as `obj.M(...)`. A new
`SemIR::CallArgParamPatterns` helper chooses the parameters matched
against the explicit arguments, excluding a leading `self` only when it
is supplied as a method-call receiver; arity checking, conversion, and
generic deduction use it. The resulting SemIR and lowering are
unchanged: `self` is still `call_param0`, and witnesses, thunks, and
vtables are unaffected.
An omitted `self` type is parsed as a `SelfBindingPattern` node with no
type expression; checking synthesizes the `Self` type so it behaves
exactly like `self: Self`. However, the exact spelling used must match
between a forward declaration and a definition, following #3763's rules
around declaration matching.
Generated functions, thunks, and C++ interop import/export build `self`
as the first explicit parameter, and the `self`-type override (e.g.
Derived->Base for a virtual override) applies to the explicit `self`.
Placement is validated by new diagnostics: `SelfInImplicitParamList`,
`SelfNotFirstParam`, and `SelfOutsideParamList`. The benchmark source
generator and the documentation adopt the `(self)` shorthand; the
prelude, the examples, and the test data are migrated in the following
commits.
Assisted-by: Claude Code with Claude Opus 4.7
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Carbon-side thunks (for example the `Copy`/`Destroy` witness thunks
generated for imported C++ types) are mangled by Carbon, and their names
incorporate a fingerprint of the involved types. The instruction
fingerprinter identifies a class only by its name and parent scope,
which is sufficient for Carbon classes but not for imported C++ classes:
different specializations of one class template (and other cases such as
types in anonymous namespaces) share a Carbon name and parent scope. As
a result, the thunks for two distinct specializations could mangle to
the same name, producing a single LLVM function with two definitions and
failing `verifyModule` during lowering.
When fingerprinting a class imported from C++, also include the Clang
mangled name of its type.
Test: toolchain/lower/testdata/interop/cpp/thunks.carbon gains a split
with two specializations of one class template, each requiring a thunk;
their thunks now get distinct mangled names instead of colliding.
Assisted-by: Claude Code
---------
Co-authored-by: Christopher Di Bella <cjdb.ns@gmail.com>
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Richard Smith
Geoff Romer
Dana Jansens
Chandler Carruth
Özgür T. ÖnsoyandDana Jansens
Christopher Di Bella