This action was created to wrap any `MetaInstId` operand of an action
instruction. This served two purposes:
1) It had a special hook in `OperandIsDependent` to allow it to be
performed while it had a dependent operand (the reference to the
instruction in the generic).
2) It created a `specific_inst` so that the downstream action saw an
instruction in the specific instead of one in the generic.
These are both replaced: the special case in `OperandIsDependent` for
`RefineInstAction` is replaced by a special case for `MetaInstId`s in
general, and the `SpecificInst` is now created as part of performing the
downstream action, rather than as a separate step carried out
beforehand.
This simplifies the produced SemIR and reduces the number of splices
significantly. It also prepares us to handle actions like
initialization, where we don't actually want to create `SpecificInst`s
immediately in the location where the action is performed, because they
actually belong somewhere else in the IR.
Assisted-by: Claude Opus 5 and Gemini via Antigravity
Add basic support for lowering templates: we can now lower `SpliceInst`
in the case where the generic and specific are from the same file (and
we don't support importing templates from other files yet in general).
In order for this to work, lowering needs to be able to query the
expression category, and to handle instructions that appear to be
(template) constants in the generic but turn out to be non-constant in
the specific, so support for that is added.
Switch `type_of_inst` from being added as an action inst to being added
as a normal inst, since it's not an action and the old approach led to a
crash in lowering.
Replace `refine_type_action` with `refine_inst_action`, and generate a
`specific_inst` instead of an `as_compatible` to represent the specific
version of an instruction that's used as an input to a template action.
This gives us a place to handle other properties of the instruction that
might vary from generic to specific beyond its type, such as its
constant value and its expression category.
For now, we provide a non-template-dependent constant value to the
`specific_inst` in addition to the non-template-dependent type we have
traditionally provided. This doesn't seem to matter for any current
actions, but sets us up to better handle future actions. The
`specific_inst` representation also allows downstream consumers of the
instruction to track which specific they should be requesting
information from. Providing a correct expression category for
`specific_inst` will be handled in a future PR.
`TemplateInst` wraps another inst. If that inst is symbolic, it is
treated as a template by `OperandDependence`.
Use this to replace `CallCppTemplateAction` with the more general
`CallAction`.
`GetCallee` is sometimes called on a spliced instruction, and is
checking its exact inst operand to see if it's a `BoundMethod`. This
fails if the `BoundMethod` is wrapped in another instruction, such as a
splice. Normally our approach for such a situation would be to
constant-evaluate the operand, but that doesn't work here because the
`BoundMethod` will be non-constant if its bound `self` is. So instead we
now step through splice instructions manually when looking for the
`BoundMethod`.
Calls with template callee or args can now be deferred via an
InstAction. This allows code like this to check:
```carbon
import Cpp inline '''
template<typename T>
struct C {};
''';
fn F(generic T: type) {
let unused c: Cpp.C(T) = Cpp.C(T).C();
}
```
Example:
```carbon
import Cpp library "<vector>";
class C(T: type) {
var v: Cpp.std.vector(T);
}
inline Cpp '''
void F() {
Carbon::C<int> c;
c.v.push_back(123);
std::cout << c.v.back() << std::endl;
}
''';
```
A new `CallCppTemplateAction` is used to delay performing the C++
template call until non-symbolic arguments are known.
Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Add `Core.CppCompat.[U]Long64` to represent a 64-bit long that is not
`i64`. Treat it as being "just slightly smaller than" `i64`, like we
treat `Core.CppCompat.LongLong64` as being "just slightly larger than"
`i64`, so that we get implicit conversions `Cpp.long` -> `i64` ->
`Cpp.long_long` on all targets.
This follows the direction of proposal #5448, and seems like the obvious
extension of the `[U]Long32` and `[U]LongLong64` types added in #6275
for targets of this "shape".
Assisted-by: Gemini via Antigravity
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
In some cases the pattern block can depend on the initializer, so it
must be sequenced after it. See #7469 for a more detailed explanation of
why this is necessary.
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Carbon-side thunks (for example the `Copy`/`Destroy` witness thunks
generated for imported C++ types) are mangled by Carbon, and their names
incorporate a fingerprint of the involved types. The instruction
fingerprinter identifies a class only by its name and parent scope,
which is sufficient for Carbon classes but not for imported C++ classes:
different specializations of one class template (and other cases such as
types in anonymous namespaces) share a Carbon name and parent scope. As
a result, the thunks for two distinct specializations could mangle to
the same name, producing a single LLVM function with two definitions and
failing `verifyModule` during lowering.
When fingerprinting a class imported from C++, also include the Clang
mangled name of its type.
Test: toolchain/lower/testdata/interop/cpp/thunks.carbon gains a split
with two specializations of one class template, each requiring a thunk;
their thunks now get distinct mangled names instead of colliding.
Assisted-by: Claude Code
---------
Co-authored-by: Christopher Di Bella <cjdb.ns@gmail.com>
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Provide a source location to the member expression used when a thunk
calls a member function. This ends up being used as the point of
instantiation when the return type triggers a template instantiation;
the absence of this location previously caused assertion failures within
clang.
Assisted-by: Gemini via Antigravity
See
[here](https://docs.google.com/document/d/1rWcueFwIfZox6GKVGxiUG4cBzjrZ6djXiIDGyJDtrE4/edit?tab=t.0)
for the design doc.
This also removes the default value of the `result_type_inst_id`
parameter of `HandleAction`, moves it before the action in the parameter
list, and documents it. This solves two problems:
- The default made it easy to forget, leading to unnecessary
`TypeOfInst` instructions.
- When it was present, putting it after the fairly "bulky" action
argument tended to make the callsite harder to read.
Richard Smith
Nicholas Bishop
Christopher Di BellaandRichard Smith
Özgür T. ÖnsoyandDana Jansens
Geoff Romer
Chandler CarruthandChristopher Di Bella