Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
During impl lookup, for each (generic) impl candidate, we form a
specific for that impl by deducing its generic arguments. Then we
compare the query interface against the impl's specific interface. That
comparison needs the deduced arguments applied to the impl's specific
interface. Previously we were doing this by getting the impl's
constraint facet type with the impl's specific applied (via
`GetConstantValueInSpecific()`) and then identifying that facet type
with the impl's deduced self.
Identify is a fairly expensive operation. It runs subst, trying to
replace `.Self` references. It walks named constraints. It collects
require declarations. We're looking at making it do _more_ in the future
too, including rewrite constraint resolution and collecting rewrite and
same-type constraints. For this reason we have a cache to make it cheap
on the second run, but it's still a very heavyweight operation to
involve in impl lookup, when all we want is to apply the impl's specific
to its target interface.
We almost have all the information we need to avoid the identification
step. We have the impl's specific after deduction. And we have the
SpecificInterface that the impl is targeting in the `Impl` struct. When
we form the specific for the impl itself, we resolve the declaration
block and form new constant values for all instructions in there, but
that does not cover the SpecificInterface that we're storing in the
`Impl` struct. So we add a new instruction to the impl's eval block,
which will be symbolic when the impl is generic and the target interface
depends on a generic parameter. And we store the `InstId` in the `Impl`
struct. This allows us to gets its constant value later with the impl's
specific applied. From that constant value we can then pull out the
SpecificInterface that the impl is targeting.
Implement the toolchain side of proposal #7254, removing the `:!`
binding
syntax for generic and template parameters in favor of the keywords
`generic`,
`template`, and `runtime` plus contextual defaults for phase.
For valid programs this is semantics-preserving: each binding resolves
to the
same phase, and produces the same SemIR, as it did under `:!`/`:`. The
parser
derives a binding's phase from its syntactic context plus any explicit
phase
keyword; new diagnostics and error recovery for misused keywords are
described
below.
Implementation details for each component:
- Lexer: remove the `:!` (`ColonExclaim`) token, move its virtual
parse-node
budget onto `:`, and add the `generic` and `runtime` keywords.
- Parser: thread a `BindingContext` (`ExplicitParam`, `DeducedParam`, or
`CompileTimeEntityParam`) from declaration introducers down through
parameter
lists to each binding pattern, using a one-token lookahead to
distinguish a
name-qualifier parameter list from a declaration's own final list.
Parameters
of a compile-time entity (`class`, `interface`, `constraint`, `choice`,
`alias`, `export`, `namespace`) and deduced `[]` parameters default to
checked
generic; explicit function parameters and local bindings default to
runtime.
`HandleBindingPattern` resolves the phase from that context plus the
keyword: a
`generic` keyword needs no node of its own (the phase is carried by the
binding's node kind), while a `runtime` keyword is preserved as a
`RuntimeBindingName` node so `check` can name it in a diagnostic. A
phase
keyword that is merely redundant with the contextual default is
diagnosed
here, without invalidating the parse tree.
- Check: a phase keyword that is invalid for its context (for example
`runtime`
on a checked-generic parameter) is diagnosed here, and recovers by
building an
error binding that still introduces the name so that later uses of it do
not
produce cascading errors.
The removed `:!` syntax is now rejected as an ordinary parse error.
The `form`/`:?`/`->?` ("extended types") portion of proposal #7254 is
left for a
separate change.
Assisted-by: Claude Code
In #7436 we stopped substituting `.Self` when collecting witnesses out
of a facet type. While this was correct, it did not capture all the
cases that need to avoid substituting `.Self`. And it poisoned the
`IdentifiedFacetType` cache by not replacing `.Self` but storing the
result in the cache. This led to incoherent behaviour, where the result
of an impl lookup would change depending on which ones had been done
previously.
Now we use a flag to track for each `.Self` if we're currently
type-checking inside the scope where it was introduced in a facet type.
While inside that scope, identify should not replace the `.Self`. Any
use of it should remain as-is since we don't yet know what value will
replace it. We call this state "frozen" since it should not be modified
by identify. This requires a substitution step when we leave the scope
that introduced the `.Self`, to remove the flag. The flag is set in the
`EntityName` of the `SymbolicBinding`, and is part of the canonical
value, since `.Self` can become part of types, which are constants, and
the flag needs to follow it for correct behaviour.
We also have to ensure the flag is the same when doing comparison with
constants from inside a facet type and constants from outside. For
instance in `(Z where .Z1 = ()) where .Z2 = .Z1`, when we arrive at the
second `.Z1` its `.Self` will be frozen, while the `.Z1 = ()` contains a
non-frozen `.Self`. So we add the frozen flag to the first when storing
it in `where_stack` in order to compare the constant values of the two
`.Z1`.
The `WhereExpr` requirement inst kinds now have an `InstConstantKind` of
`AlwaysUnique` instead of `Never`. This allows us to add them to the
usual InstBlocks, and in an `eval fn` body they have a constant value,
so eval does not fail when trying to call that function. We have to be
careful to not consider `AlwaysUnique` as being actually concrete
though, since their constant value erases `.Self`-dependence. This
allows us to stop special casing them when thawing the requirements
block in a `WhereExpr`, and we can just thaw each `InstId` in the block
in a straightforward manner.
We add the new flag to the instruction's fingerprint and name in
formatted semir.
This adds SemIR structs and implements building `observe` lists, as well
as naming, formatting, and importing `observe` declarations.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
The bulk of this change is changing most pattern insts to be `Always`
rather than `AlwaysUnique` constants, so that they can be wrapped in
`SpecificConstant`s to perform substitution. That then lets thunking
rely much more on `SpecificConstant` wrappers instead of deep-copying
the inst tree with modified types.
This approach to thunking should scale better, particularly as things
like form generics make function signatures more complex, because we can
leverage the existing support for constant evaluation and substitution.
Unfortunately, applying this approach to binding patterns will require
more work; see the TODO near the top of `thunk.cpp` for details.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
When a class extends an interface, referring to a member name of the
interface as an unqualified name should refer to the class's
corresponding associated entity value, not to the associated entity
itself. Similarly, in an `impl`, unqualified names of associated
entities should refer to the `impl`'s corresponding value for that
entity.
To support this, we treat `impl`s as `extend`ing their implemented facet
type, and we make lookups into an extended facet type use the `Self`
type of the extending `impl` or `class` if lookup finds an associated
entity. We already did the latter if the extending entity was an
interface; this extends the existing support for these other cases.
Currently each interface has a `Self` facet internally that becomes a
binding to every entity inside the interface: associated constants,
functions, and require decls. Each of these has to be independently
generic as a result. This makes is challenging in extended name lookup
to move into an extended scope of an interface, as we have a specific
for the interface, but the names within require a different specific
that includes a `Self` facet value.
We generalize this relationship by adding a second generic to Interface,
called `generic_with_self`. When we want to work with entities inside
the interface, we move from the interface-without-specific to the
interface-with-self specific by adding a Self to the specific. This is
done independently of any particular entity inside the Interface, as
those entities are now all members of the interface-with-self generic.
Associated constants no longer need a generic of their own, as they do
not have separate generic bindings. Functions retain a generic, but if
the function has no generic arguments, it will have no bindings of its
own now.
Require decls retain a generic so that their specific can be
instantiated separately from the interface. Requiring the interface to
be complete does not require the types in a require decl to be complete
unless it is modified by `extend`. So we allow them to be completed
later by keeping them in a separate generic.
Named constraints look like interfaces and gain the additional inner
generic-with-self, with the same relationship to require decls.
This removes the need for name lookup to perform Substitution of a Self
facet into the extended scope instruction. Instead, the
`SpecificConstant` instruction inserted by a `require` decl is part of
the interface-with-self generic. When looking through a FacetType for
extended scopes, for each interface, we push the scope with the specific
for the interface-with-self. Then the constant value of the
`SpecificConstant` is correctly modified by the provided self
automatically through applying that specific.
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
The impl's body block has to end before we make its ImplDecl
instruction, and the witness instructions come later, so they don't end
up in the body block. Currently they just end up in the enclosing (file,
typically, or class) scope block.
Add a new InstBlockId to Impl for holding witness instructions, and
explicitly insert them into that block. Then include those instructions
into the scope of the Impl for naming, and format them into the Impl
right after the body block.
This is based on #6484
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
They are not used for impl lookup or verifying anything yet, but now
they appear in the textual semir.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When deducing arguments for generic parameters of an `impl`, the
deduction calls `Convert` on the input arguments. Often, the input
argument is a facet, and needs to be converted to a type via
FacetAccessType in order to produce a different facet. These
instructions end up being added to the semir, but only their constant
values are needed for the resulting specific returned from Deduce.
In the best case, these extra instructions are just noise in the semir,
or they just cause instruction names to get differentiated with larger
suffixes.
In the worst case, these extra instructions contain references to
instructions from a generic context, and leak them out of that generic
context and into another. In particular, when importing a
LookupImplWitness instruction, the re-evaluation of it can do deduce
(when the lookup is against a generic `impl`). The instructions created
in Deduce are not part of the import, and end up referring to imported
instructions from the local context, which leads to confusion in the
toolchain, and can crash.
The `import_self_specific.carbon` test demonstrates this. It causes the
`I.F` function to be imported from the `I` interface when building the
witness table for the `impl`. Doing so imports the specific of `C` which
includes a LookupImplWitness for `Self.Accoc` in `I`. The `Self` is a
BindSymbolicName with generic binding index 0, in `I`. When Convert
creates instructions in the generic `impl forall D`, however, they end
up referencing and including this BindSymbolicName into its eval block.
But the generic binding 0 in the `impl` is a very different thing (a
value of type `E`). This confusion leads to crashes.
The SymbolicBindingType refers to the type value that will be
substituted in for the BindSymbolicName, but holds onto the EntityNameId
from the BindSymbolicName instead of (or in addition to, for now) the
instruction.
The EntityNameId will be used to look in the ScopeStack to find the
witnesses either from the BindSymbolicName instruction, or other
instructions that specify `impls` constraints against the EntityName.
This will allow us to have the `T` in `I(T)` resolve to a `.Self`
reference in the type so that we get type equality with the binding's
type: `T:! I(.Self)`.
Locations are similarly fragile, because adding a comment changes them.
This has made me pause when making prelude changes in #6144, so dropping
them for those cases.
Instruction ids aren't actually that interesting outside debugging, and
can be churny when doing other structural changes. I've seen this in
particular when doing singleton changes, which bump every instruction
id.
Note there are still other ways fragility from locations can crop up.
This shouldn't be considered a complete fix, but hopefully a small
improvement.
This makes convert more consistent, it always makes a FacetAccessType
for a facet value, rather than only doing so after lookup returns. The
intention for this is that FacetAccessType will evaluate to
SymbolicBindingType in the future, so this will expose that constant
value to impl lookup instead of the original facet value, which will
avoid impl lookup having to deal with `.Self` or `BindSymbolicName`
specifically.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
The main direction of this change is the edits to `destroy.carbon`
(matching in both prelude and min_prelude).
Previously there was a no-op blanket impl for `Destroy`, which hid all
missing implementations of `Destroy`. This does a few things:
- Sets up builtin aggregate destruction for struct and tuple types as
before, but also adds C++ class types and array types to the same
handling. (all as a TODO for actual implementation)
- Also maybe-unformed destruction, for now at least. (there's a chance I
may try a different approach on this, but the impl lookup wasn't working
as I'd hope in order to write it in code)
- Adds handlers for simple things that are easy to do in code: `type`,
`bool`, pointers. (because these are no-op destruction)
- Redirect `const T` destruction to `T` destruction.
This leaves as future issues:
- `partial T` destruction. (this can't be done similar to `const`
because it only works for non-`final` class types; I think `class`
definitions should just generate what's needed)
- Destruction of other prelude-provided types. (will probably come up as
we implement class destruction, that the adapted builtin type doesn't
implement `Destroy` -- but may end up special-casing that in a way that
moots it)
This moves the `&` operator from `facet_types.carbon` to
`convert.carbon` because more things need to handle type and now that
we're getting separate copy and destroy interfaces. It should be
low-cost (an interface and builtin) so hopefully this is the right
balance for complexity and re-use.
A few tests are also edited in order to focus them more on what they
intend to test, and avoid a `Destroy` dependency.
This is in support of a goal of changing the blanket `destroy` impl to
use (roughly):
```
private fn CanAggregateDestroy() -> type = "type.can_aggregate_destroy";
// Handles aggregate type destruction.
impl forall [AggregateDestroyT:! CanAggregateDestroy()] AggregateDestroyT as Destroy {
fn Op[addr self: Self*]() = "type.aggregate_destroy";
}
```
That isn't done here because there's still other issues that migrating
raises. What this *does* do is add the builtin functions, and in
particular, support to `FacetTypeInfo` to make `CanAggregateDestroy`
work.
The "special requirement" approach in `FacetTypeInfo` allows us to
support restricting a blanket impl under the current approach of impls.
Maybe we'll find a cleaner approach that can work in the future, but
this fits into the current model by propagating similar to other
requirements. I'm using an enum mask because we have a number of similar
things to add (e.g. copy, move) but I'm not sure we need a full vector.
A few alternatives considered were:
- Supporting syntax more like `where .Self impls
TypeCanAggregateDestroy(.Self, SupportedInterface,
UnsupportedInterface)`. I think it'd be a little cleaner, but requires
better compile-time evaluation in order to assess the type of the call.
Right now it's expected to be a `FacetType` too early to make this work,
and I was concerned about pouring too much more time down this route.
- Providing an actual interface, in particular doing name lookup back
into `Core.` for an interface. This would've added name lookup overhead,
and the question of whether an `impl` exists.
- Generating an interface. This avoids the name lookup, but would still
raise the question of whether an `impl` should also be generated. Work
I've previously done generating interfaces for class destruction also
feels complex to both write and understand (an unfortunate issue).
- Still modeling as an `ImplsConstraint`, for example by defining a
special `InterfaceId::CanAggregateDestroy = -2` similar to what we do on
other ids. I was hesitant because of how this expands the number of
modes of `InterfaceId`, and things for consuming code to watch out for,
for what feels like a relatively niche set of use-cases that are only
interface-like.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Instead of hardcoding which types are copyable, add a `Core.Copy`
interface to perform copying. Move almost all the current copy support
to that interface. Some remaining pieces are still using builtin logic
after this PR:
* For tuples and structs, builtin logic is used to perform elementwise
copies. This also supports copying *adapters of* tuples and structs,
which seems like it may not be desirable, especially for non-extending
adapters. A `Copy` impl is provided for tuples of at most 2 elements, so
that `Core.Copy` constraints are satisfied, but we can't implement this
generally until we have variadics support, and don't yet have a
mechanism to generalize this to structs.
* For `enum` types imported from C++, builtin logic is used to perform a
copy. This is temporary until we have a mechanism to identify these
types from an impl in the prelude.
One lowering test in `toolchain/lower/testdata/class/generic.carbon` is
disabled for now, as it causes a crash in the lowering code due to an
ABI mismatch between the call signature in the lowered declaration of a
specific function and the call that is generated in the specific callee.
Fixing this is a little involved, and will be done in a separate PR.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
If it's just `TypeType` then the `BindSymbolicName` appears directly in
type positions, but if it is replaced with another facet value, then we
would need to insert a `FacetAccessType` around it. By giving it a
`FacetType` type, like other `BindSymbolicName`s we make it consistent
and avoid having to introduce extra instructions.
This uses each vector's size as a barrier between lists, to eliminate
the possibility of incidental collisions between entries of different
lists. This is the same as is done inside `AddBlock`.
We add a virtual node (`CompileTimeBindingPatternStart`) as the first
child of `CompileTimeBindingPattern` which holds the identifier
underneath it, so that it is checked just before the type expression of
the `CompileTimeBindingPattern`. When we reach this virtual node during
check, we add `.Self` as a name in the current scope, and when we reach
`CompileTimeBindingPattern` we remove it from scope, which ensures it's
present during only the checking of the type expression for the compile
time pattern.
At the moment the `.Self` has a different type (it's a `TypeType`) than
other `.Self` in the facet type (which are a single `FacetType`), but
the intention is to immediately substitute it out of the facet type
entirely, replacing it with a reference to the compile time binding (a
`BindSymbolicName`) itself. A TODO has been added for this.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The self access is important; for the test `generic_class.carbon` being
added to `toolchain/check/testdata/class/destroy_calls.carbon`, it was
using `%T.as.Destroy` instead of `%D.as.Destroy`, indicating the default
blank impl was being used instead of the type-specific version. That
test is trying to focus on the issue, but the delta is visible in a
couple other files in this PR, for example
`toolchain/check/testdata/class/generic/init.carbon`.
I'm separately working on getting rid of the default impl, which is how
I noticed this.
I was thinking about this for destruction, which I may not be able to
use it for, but still think this may be a good change to keep features
consistent.
Although this focused on `Destroy` support, some choices here around
`implicit_type_impls` are because copy/move will likely follow a similar
approach. I'm trying not to predict too much about how we'll structure
those, but I'm putting `Destroy` impl logic in a file that could perhaps
be shared with those. They'd likely be interested in similar things,
e.g. traversing members of types (particularly class, struct literal,
tuple literal).
At present this sets the destroy function as `no_op` which is consistent
with current logic, but has a TODO to correctly define.
Constant importing for functions changes slightly due to some issues I
was having with `GetFunctionType`. zygoloid suggested this approach to
avoid `EvalInst` logic.
Adds a flag for controlling whether to generating these impls. While
this does generation for `class`, as noted above this'll also need to be
done for tuples and struct literals, which would leave the `none.carbon`
min_prelude unable to use any types. Note if destruction *would* occur,
it'll still look up `Core.Destroy` for that and fail, but that's already
true of any test using `none.carbon`. I'm trying to use the flag to see
if we can keep `none.carbon` working mostly-consistently.
I'd tried separating out the flag to #5852, but that got a lot of
pushback over whether the behavior was appropriate. I'm hoping that the
interactions here make it clearer why the particular approach -- the
goal is not to enable advanced testing, or create some new end-user
behavior that we really support, it's just to keep no-prelude tests
functional. The main question raised there was why not just keep
generating `impl T as Core.Destroy` if `fn destroy` is present -- but I
think here it should be apparent that would require additional
complexity, as the generation of `impl T as Core.Destroy` is not
currently conditioned based on the implementation of `fn destroy`. I'd
rather add complexity to this flag only if it's enabling interesting
test functionality.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Change impls from `<interface>.impl` to `<self>.as.<interface>.impl`,
and *member* functions to `<parent scope>.<fn>` (non-member functions
exclude their parent scope). Stop special-casing builtin functions,
given the new naming scheme.
The purpose of this is to make it clearer when a member function is
being accessed and, if so, which member function. In particular, we
often access interface `Op` functions. The builtin function
special-casing was intended to help with that, but we still have lots of
`Op` functions. This particular approach should make the interactions
clearer.
This changes up queueing of block IDs a little because, in particular,
we need to process bodies of entities only after constants finish
processing. But, it should also result in less memory usage during
processing because it means we have less on the insts stack at any given
time, since we track a block rather than all instructions contained by
the block.
This switches from the `CollectNamesInBlock` approach for entities, to
instead traversing entities as they're encountered. For example, when
traversing constants, when a type is found, the entity will have its
block queued for processing.
This leads to a change in the traversal order, which affects
disambiguation done by numeric sequencing (since that's just showing the
traversal order).
This will allow for simpler "name based on name" logic. This is
something I plan to use for:
- impls: `<type>.as.<interface>.impl`
- functions: `<entity>.<member function>`
- Note an impl may be used as the entity for a bound function.
By naming the entities as they're encountered, I'll be able to rely on
the generated names rather than recalculating them.
To assist this, I'm also differentiating between the ambiguous and
disambiguated name. Otherwise, we could end up with things like
`<function>.<disambiguator>.<call>.<other disambiguator>`, where the
repeated disambiguator may not be necessary in order to get full
disambiguation. It's also a smaller delta from the current output.
Note, changing `Name` to a class felt appropriate given its shape. I was
also noticing that parts of its API were unused, and the class helps
detect unused private members.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Remove use of i32/bool when a builtin type or test-define class type can
work. Make `Sub` user-defines in a test that is testing builtin
functions and not trying to test the prelude, in the same way that it
defines its own Negate. Reduce use of the + operator when it isn't
contributing to the test's coverage, since the + operator needs the full
prelude. Remove use of Core.Print when it's not required for the test.
Move `deduce_nested_facet_value.carbon` to its own file since it uses
TypeAnd, and the rest of deduce.carbon does not, but uses i32. This
means they can each use a different min-prelude.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Christopher Di BellaandRichard Smith
Dana Jansens
Chandler Carruth
Özgür T. ÖnsoyandDana Jansens
Geoff RomerandRichard Smith
Jon Ross-Perkins