Where `--no-dump-sem-ir` is used, change to `--dump-sem-ir-ranges=only`.
Otherwise, add `--dump-sem-ir-ranges=if-present` with a TODO to change
to `only`.
Note, SemIR is affected just because the extra comments change line
numbers in files where splits aren't in use.
Instead of building an eval block as a separate pass at the end of a
generic, build the eval block incrementally.
The larger change here is that asking for the type or constant value of
an instruction now always returns an unattached type or constant value,
in order to preserve the behavior that we previously achieved by doing
the rewrite to attached types and constant values at the end of handling
the generic.
This also incidentally fixes some subtle issues where attached types and
constant values would leak out into check and cause it to get confused
about differences between attached and unattached values. Check should
no longer see attached values except where it explicitly asks for them.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Don't import `ImplWitnessTable` into the `constants` block, because we
generally don't put `Unique` constants there. This matches the handling
of the other kinds of `Unique` constants. In order to keep the
instruction visible in formatted SemIR, add it to the `imports` block
instead.
Also fix a bug in the instruction formatter that resulted in
instructions in the `imports` block being omitted from the output if
they were only referenced by earlier instructions in the `imports` block
and by instructions in the `constants` block. This was already resulting
in some referenced instructions being omitted from the output, but also
occurred frequently for `impl_witness_table` instructions after this
change because it is common for the only reference to those instructions
to be from `impl_witness` instructions in the `constants` block.
This was originally needed to support constant evaluation of name
expressions, but that's now done in a different way.
This is actually a step toward treating all patterns as constants. The
upcoming change will do so in a slightly different way, and so it will
simplify the review to start from a baseline where patterns are never
constant.
We eliminate the `FacetAccessWitness` instruction, which would sometimes
immediately evaluate to a concrete `ImplWitness`, and sometimes remain
symbolic. This instruction is now replaced by `LookupImplWitness` in all
cases. To support the same use cases, when it is evaluated,
`LookupImplWitness` will look in the self value if it's a facet value,
and attempt to return a concrete `ImplWitness` from it before looking
for an `impl` statement.
The `LookupImplWitness` instruction's value is now canonical, even when
it evaluates to a symbolic `LookupImplWitness` instruction, by
canonicalizing the self value of the lookup query. This canonicalization
unwraps `FacetAccessType` and `FacetValue` instructions to get to an
underlying canonical facet value. However we must preserve and use the
non-canonical query while evaluating the instruction in order to look
for a concrete `ImplWitness` if the query self value was a concrete
`FacetValue`. The canonicalization ensures that symbolic witnesses
obtained from a facet value are compatible with those obtained from an
impl statement, as long as the self types originate from the same
canonical facet value though they may have been narrowed.
Member access now unconditionally does a `LookupImplWitness()`
operation, instead of only sometimes doing the lookup for a final impl
declaration.
`EvalImplLookupResult` is marked `[[nodiscard]]` so that we don't
construct it and forget to return it. This was a mistake made at one
point during the creation of this PR. And the `has_concrete_value()`
method no longer has a precondition that `has_value()` is true, since we
want to look for a concrete result only in the new use of
`EvalImplLookupResult` returned from lookup into the query self facet
value.
The TODO from `FacetAccessWitness` evaluation is addressed by ensuring
the index of the witness in the `FacetValue` comes from the required
interfaces of the `FacetValue`'s type, and that the type (a `FacetType`)
is the same facet type used in the query to construct the `FacetValue`'s
witness block. This is made possible by eliminating the
`FacetAccessWitness` indirection. The lookup into a `FacetValue` happens
while evaluating `LookupImplWitness` and it does so directly on the self
value. This gives a consistent view of the witness set and the facet
type, as they both come from the same instruction.
All of this with 400 less lines of code. :)
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.
For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.
The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.
One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.
Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.
The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.
This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.
The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:
- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
The instruction does act somewhat like a witness, saying that an impl
does exist for a lookup, but the instruction more concretely represents
an impl lookup - since that is done when it is evaluated.
Add a new instruction called ImplSymbolicWitness which represents a
search for an impl declaration given a self type and an interface to
find implemented for the self type. The self type is stored as a
constant instruction id, rather than as a ConstantId, as instructions
don't currently support holding ConstantId. The interface is stored as a
SpecificInterface but we can't fit all of it directly into the
instruction. So we add a new id to refer to the SpecificInterface as
follows.
Add a new SpecificInterfaceId which indexes into a canonical value store
on SemIR::File. This tracks all `SpecificInterface`s stored in an
instruction - specifically the ImplSymbolicWitness instruction.
The SpecificInterface on Impl is still stored there as a value, not as
an id, and no id is eagerly constructed for it. We wait until an id is
needed to make one. Since they are canonical, a new id is only create
when a new SpecificInterface value is seen.
When doing impl lookup, and the query is not concrete, and the impl is
not effectively final, the query needs to consider future impls that may
specialize either the self type or the constaint to make a more precise
match and replace the found impl declaration. Instead of returning the
ImplWitness instruction from the found impl, we generate a
ImplSymbolicWitness instruction, storing the query so that it can be
replayed later. This instruction is added to the generic eval block and
thus will be re-evaluated later with a SpecificId that may make the
query more concrete. When evaluating the instruction and replaying the
query, the lookup has the same conditions and if it does not decide to
use the found impl concretely, then the same instruction is returned
from eval, leaving it as symbolic.
--- Impl lookup changes ---
Impl lookup gets a little more interesting now. It continues to look in
the facet value for a witness if the self type is a facet value. Then
falls back to looking for an impl declaration. This step is no longer
done directly. Instead, we construct a ImplSymbolicWitness instruction
and evaluate it immediately for each interface that are in the query
facet type.
The ImplSymbolicWitness instruction, when evaluated, calls back to the
impl lookup code, with a query specific interface. There we resume back
into the same code path as from before, finding a witness in an impl
declaration. But we may return "found a non-final impl" instead of a
concrete witness. If eval receives this back, it evaluates to the
current ImplSymbolicWitness instruction as the resulting constant value.
To pass lookup failures back through eval, a result of InstId::None from
the second step of impl lookup will result in a non-constant value,
which is used as a signal back up the stack to the original impl lookup
function that the lookup failed. Using a non-constant value here would
break evaluation of the generic eval block if impl lookup could fail
there, however we know it will not since we only leave behind an
ImplSymbolicWitness instruction in the eval block if we found at least
one matching impl already, and we just want to look for a better match
with a more specific query.
We must take care to not store a reference into any value store across
computation in impl lookup, since impl lookup can recurse into itself
invalidate those stores. That includes the SpecificInterface obtained
from a SpecificInterfaceId, which impl lookup also inserts into the
store.
--- The long tail ---
Adding a new instruction and a new id type requires a myriad of changes
to support them:
We add Dump() support for SpecificInterfaceId. And fix a crash in Dump
for SpecificId::None. We also add MakeSpecificInterfaceId() for dumping
arbitrary ids.
The type of ImplSymbolicWitness is a new singleton builtin type
instruction called WitnessSymbolicType (like WitnessType is the type for
an ImplWitness).
Both ImplSymbolicWitness and WitnessSymbolicType are given `Value` as
their expression category as they are builtin constant values. And
BuildInfo() in TypeCompleter is taught about them both, returning a
`ValueRepr::Copy`.
WitnessSymbolicType is added to the set of SingletonInstKinds, so that
it can have a singleton instrution id as a static member.
Lower's BuildTypeForInst() is taught to make an empty struct for
WitnessSymbolicType, similar to WitnessType.
Instruction formatter (FormatterImpl) grows support for printing a
SpecificInterfaceId so that it can print both arguments of
ImplSymbolicWitness on the RHS when printing the SemIR instruction. To
print a SpecificInterfaceId, it prints both the interface id and the
specific id (if there is one). For example, for a query on a generic
interface `Z` with one parameter, the RHS includes the query, interface,
and specific:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
IdKind is extended to include SpecificInterfaceId.
InstFingerprinter is taught to look through SpecificInterfaceId and use
the interface and specific ids in the fingerprint.
InstNamer is taught about SpecificInterfaceId, counting the interfaces
when building an index. It is also tought about ImplSymbolicWitness,
using the name of the interface within and the `.impl_symbolic_witness`
suffix. For example, here the LHS is named after the interface in the
query:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```
StringifyTypeExpr is taught about WitnessSymbolicType, which uses its IR
name since it's a singleton. And about ImplSymbolicWitness which uses
its constant value. The handling of ImplWitnessAccess also needed to be
adjusted, since it assumed that ImplWitnessAccess::witness_id would
always be a FacetAccessWitness, but it can now also be an
ImplSymbolicWitness. (It seems that the witness_id is also assigned
ImplWitness instructions, but those ImplWitnessAccess instructions don't
ever seem to get stringified in a diagnostic at this time.) At the
moment the ImplWitnessAccess with a symbolic witness is just stringified
as "<symbolic>", such as in:
```
x.carbon:1:2: error: cannot implicitly convert value of type `()` to `<symbolic>` [ConversionFailure]
let a: C(D).(Z.X) = ();
^~
```
There is a TODO left behind to include more information there.
The TypeStructure builder is made to handle WitnessSymbolicType and
WitnessType. These come up now in deduce where a generic impl will have
a ImplSymbolicWitness in a FacetValue for a generic self type. The query
may have a concrete ImplWitness in the same position. Since deduce tries
to deduce through the FacetValue, it tries to convert ImplWitness to
ImplSymbolicWitness, tries to do an impl lookup for `impl ImplWitness as
ImplicitAs(ImplSymbolicWitness)` and causes us to build type structures
with each of these.
Subst is updated to handle pushing and popping SpecificInterfaceId.
Without this, when finishing a generic's eval block, we would walk into
the ImplSymbolicWitness instruction, and its arguments, and fail to
recurse down into the SpecificInterfaceId. Then any specifics inside
would be left as "orphaned" without any generic id attached to them, and
we would never update the instructions in the SpecificInterface's
instructions (inside its own SpecificId) with new constant values when
evaluating the generic eval block against a specific. To do this we push
the specific_id inside the SpecificInterface, and when popping we pop
the specific_id then construct a new canonical SpecificInterface with it
and return that id.
We add support for importing ImplSymbolicWitness by importing its self
constant instruction and specific interface id. However we also had to
add import support for SpecificImplFunction, which can now appear in the
generic eval block for a generic impl declaration, and thus must be
imported with the declaration. This is done very similarly to
SpecificFunction, except the `type_id` is a singleton value.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When the parameter is a deduced symbolic FacetValue, refering to a
BindSymbolicName, and the argument is a concrete FacetValue that would
match the FacetType requirements on the BindSymbolicName's type, we
currently do not deduce that the argument matches the parameter.
The argument is not _converted_ to the parameter type because they are
both FacetValues of the same FacetType type. However they are also not
equal constant values so the argument is not saved as a deduced match
for the parameter.
In order to accept the FacetValue, we need to consider them as
`deduce_through`, which attempts to deduce each of the fields in the
argument FacetValue against the fields in the parameter FacetValue.
This deduces that the argument's concrete type matches the symbolic
BindSymbolicName and its witnesses are the same.
Since the parameter is a FacetValue, its argument is not the type that
needs to be recorded as the deduced type for the binding. The
BindSymbolicName inside the parameter is the place that we need to find
the deduced type for the binding. So simply walking into the FacetValue
gets us to that position, where we eventually record the deduced
argument type as being the concrete type from the original argument
FacetValue.
Similarly, when determining what interfaces are satisfied by a
FacetValue for deduce, we want to use the full type available in the
FacetValue rather than just those from its FacetType. Determining
availability of interfaces here is equivalent to converting, and we want
converting a FacetValue to always work on the full available type info.
Only API access (member lookup) is restricted by a FacetValue to the
interfaces provided by its FacetType type.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.
FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.
FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.
The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.
There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.
TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.
---------
Co-authored-by: jonmeow <jperkins@google.com>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When substituting into a generic in order to form a generic eval block,
we form `SpecificId`s to track the list of arguments that should
eventually be used to form a specific referenced by the eval block.
Values within that specific are not needed and won't ever be used, so
it's safe to skip forming them in the first place.
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This is primarily to free up space in the BindingPattern insts, but as a
side effect it moves the link between BindingPattern and its BindName
out of the SemIR, and into a transient data structure in Context.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
Jon Ross-Perkins
Richard SmithandDana Jansens
Geoff Romer
Alina Sbirlea
Calvin
David Blaikie
