Instead of always printing types as canonical, attempt to find a sugared
type where possible, and include that type in the diagnostic. We can
only do this when given the instruction whose type is being printed
(`TypeOfInstId`) rather than the canonical type ID.
Initial support here is intentionally minimal: just looking through
calls to the callee's declared return type, and looking through pointer
dereferences and corresponding pointer types, to build out the initial
infrastructure. More cases can be added later; this degrades gracefully
to using the canonical type if a better type can't be found.
Assisted-by: Claude Opus 5 via Antigravity
Inject the name of a macro rather than its contents when computing its
expansion. If the macro refers to itself, it will not expand within its
own body, rather than expanding once.
Switching from `EnterTokenStream` to `EnterToken` exposed that our Clang
preprocessing environment was a little broken -- we reached the end of
the primary source file and starting tearing stuff down before we
actually finished parsing, which we were mostly getting away with before
but aren't any more. Enabled Clang's incremental processing mode to fix
this. This causes Clang to remain in the main source file when it
reaches EOF instead of popping it. This also causes the diagnostics for
invalid `module;` declarations to change, but in a way that seems not
really any worse than before.
Also slightly changes the diagnostics produced from macro expansion
failures. The new diagnostics are a bit more precise -- they now capture
the outermost level of macro expansion -- but we don't do a good job of
rendering the Clang snippet attached to the "in macro expansion" context
note yet, so the context looks a bit weird: we get two different
snippets attached to the same diagnostic.
Instead of treating all C++ code as coming from a single synthetic
`CheckIRId`, track the `SemIR::File` associated with each C++ location.
This is necessary since each `SemIR::File` has a distinct `CppFile` and
therefore distinct `SourceLocation`s and `ClangSourceLocId`s.
Assisted-by: Gemini via Antigravity
If an interface contains `require impls`, then implementing the
interface requires each of the `require impls` statements to be true at
the point of the impl definition for the containing interface.
Errors that occur while constructing a specific should be tied back to
the facet type being identified. We don't have an InstId for the facet
type during identify, so provide the means to Stringify a FacetTypeId.
Depends on https://github.com/carbon-language/carbon-lang/pull/6435
Don't convert to f64 until we know that's the type that we actually
want. Also reimplement the conversion from RealId to FloatId to perform
an exact conversion with a real check for overflow, rather than
performing an approximate conversion via the host `double` type.
Unfortunately, LLVM doesn't expose its integer mantissa and exponent to
APFloat conversion, so we convert the RealId back to a string for now.
The LLVM conversion also detects overflow only if the literal would
round to having an out-of-range exponent, not if the literal is outside
the range of values of the type as the Carbon design expects. It's not
clear to me which rule we actually want here, so for simplicitly I'm
using the LLVM rule for now.
In preparation for adding other floating-point types beyond f64.
Instead of taking the complete text of the Clang diagnostic and using it
as the message portion of a Carbon diagnostic, generate the individual
pieces separately and pass them into the Carbon diagnostic
infrastructure.
* Clang's context lines are generated by running a custom "diagnostic
renderer" and tracking which lines it wants to print as context for a
given source location. When mapping from a C++ source location back to a
Carbon location, the Carbon `Loc` structure is now fully populated,
including filling in the context line and the column number.
* Clang's snippet is generated by running a custom diagnostic renderer
that is a cut-down version of the full text diagnostic renderer that
only prints a snippet. This is then attached to the Carbon diagnostic
manually as an override for the snippet we'd usually create.
We no longer repeat the file location twice on each diagnostic, and no
longer produce a bogus "in import" line for all locations coming from
clang that point arbitrarily to the first C++ import in the Carbon file.
The `[diagnostic kind]` marker is now displayed at the end of the
diagnostic message, not on a line of its own after the snippet.
Factor out the logic for mapping from a `LocId` into a diagnostic
location from check into sem_ir so it can be reused by lowering. Include
the function and instruction being lowered in the pretty stack trace.
Example stack trace:
```carbon
2. filename: examples/sieve.carbon
3. core/prelude/types/int.carbon:213:3: lowering function Core.Op(Core.IntLiteral as Core.ImplicitAs(i32))
fn Op[addr self: Self*](other: Self) = "int.sadd_assign";
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4. core/prelude/operators/arithmetic.carbon:22:27: lowering call
fn Op[addr self: Self*](other: Other);
^~~~~~~~~~~~
```
I believe we will need to eventually add the specific C++ import
information in `LocId`.
This also seems to fix the `LanguageServerDiagnosticInWrongFile` issue
(#5604).
We're still not in the state we want to be according to
https://github.com/carbon-language/carbon-lang/pull/5246#issuecomment-2784301206.
Will look into removing the location part from the `"In file included
from ..."` line.
Part of #5245.
This reclaims a bit inside `LocId`. I'm hopeful we don't actually need
to store the token-only state.
Note I'm looking at this in the context of desugaring; I was thinking
about changing `ToImplicit` logic a little to push more towards
`GetCanonicalLocId`, and the "desugaring" TODO there. Removing
`ToTokenOnly` makes me feel a little more free to rename `ToImplicit`,
since it eliminates consistency as a question.
Once a concrete result has been found, it's not legal to write an `impl`
that would change the concrete result afterward.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Remove calls to `InstStore::GetLocId()` to build a LocId from an InstId
now that they can be constructed directly from the InstId. Most uses of
LocId are just plumbing, so this does not affect them. However places
that want to look inside the LocId do not want to work with the InstId
form. In these places, introduce `InstStore::GetResolvedLocId()` which
converts a LocId (or an InstId as an optimization) into a LocId which is
not backed by an InstId. These locations can be printed (they have a
line and column when they are a NodeId), they can have flags added to
them (`ToImplicit`, `ToTokenOnly`), they can be converted to an
underlying ImportIRInstId, or they may be `None`.
`Dump()` is made to print a resolved location instead of printing the
InstId in the location, since (at least in my experience) the resolved
location is what is interesting in debugging, and this saves manual
`MakeInstId` steps in the debugger every time a location is of interest.
The LocId constructor from InstId is made `explicit` to add clarity to
function calls passing an `inst_id` now directly instead of calling
`context.insts().GetLocId(inst_id)`. To avoid needing to construct
`SemIR::LocId(...)` explicitly in all cases though, the diagnostics code
in Check uses `DiagnosticLocId` as its template parameter which accepts
InstId as well and does the construction of LocId from it.
Because LocId now requires an explicit construction from InstId, any
callers to `AddInst()` functions will have to explicitly convert to
LocId if they had an InstId, but not if they pass a NodeId. To make this
difference clear to callers, we `requires` that the input type can be
converted to LocId. This ensures that passing an InstId results in an
error at the callsite where the InstId is passed, instead of generating
a compiler error when trying to construct `LocIdAndInst` inside
`AddInst()`, which is less clear about what went wrong and doesn't seem
entirely intentional.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The main goal of this is to collapse the LocId and SemIRLoc types into a
single type, eliminating the need for APIs to decide which to use. This
originated from discussion about UnwrapSemIRLoc in #5169. Although that
was removed in #5202, it's probably still a good direction for LocId.
This changes the packing of LocId to allow adding InstId, making it
tri-modal: ImportIRInstId, InstId, or NodeId. This has a side-effect of
reducing the available space for ImportIRInstId, although not by much
due to the pre-existing `ImplicitBit` behavior. If needed, we could also
probably play with packing a bit more since `ImplicitBit` really only
applies to `NodeId`, but I was trying to keep the logic a little
simpler. Note `TokenOnlyBit` can still apply to `ImportIRInstId`.
This leaves in place a typedef for SemIRLoc -- I intend to clean that up
separately.
Some Discord discussion is
[here](https://discord.com/channels/655572317891461132/655578254970716160/1353755830058745959).
Use it to stringify associated constant values in diagnostics. In
passing, add missing support for stringifying bool literals. Note that
there are some cases that it doesn't stringify properly, but that's not
new here; such cases could already be observed when stringifying generic
arguments.
Given the namespacing of `Diagnostics` in #5173, now we can use
`DiagnosticEmitter` for phase-specific emitters. This is consistent with
how we do `Context`, and also check had started this with
`DiagnosticBuilder` in anticipation of the namespacing.
Also renames `Emitter::DiagnosticBuilder` to `Emitter::Builder` for
consistency with other `Diagnostics` entities.
In check, I'm still splitting `DiagnosticEmitterBase` and
`DiagnosticEmitter` just to keep the emitter definition separate from
the context.
Also cleans up some incorrect check diagnostic emitter dependencies in
lower.
Richard Smith
Özgür T. Önsoy
Jon Ross-Perkins
Dana Jansens
Boaz Brickner
Thomas Köppe