This builds a mechanism for the toolchain to construct more complex
min_prelude files, which in turn should allow the toolchain to stop
special-casing the min_prelude directory. For example, instead of:
```
args.insert(args.end(), {"--custom-core",
"--exclude-dump-file-prefix=include_files/"});
```
This should allow (in a `min_prelude` file):
```
// EXTRA-ARGS: --custom-core --exclude-dump-file-prefix=include_files/
```
Then when that min_prelude is included, it'd be used.
But also, this should allow sharing between min_prelude files with use
of `INCLUDE-FILE`, which as we make progressively more complex
min_preludes might become useful.
The INCLUDE-FILE option is only used in the toolchain tests for now. If
specified in a file test, the given file path is added to the test's
arguments. For toolchain tests this makes the file's package available
to the test. The `--custom-core` command line flag is added to the
driver, which avoids adding the production `Core` package to the command
line. Together, these allow a test to provide their own minimal `Core`
package.
For example, this would replace `Core` with the package and prelude in
`facet_types.carbon`.
```
// INCLUDE-FILE: toolchain/testing/min_prelude/facet_types.carbon
// EXTRA-ARGS: --custom-core
```
To support this:
* //testing knows how to parse INCLUDE-FILE out of the header of a test
file.
* //testing adds the file to the virtual file system, and includes it in
the test's arguments.
* //toolchain/driver grows the --custom-core command line flag to avoid
loading the production `Core` package.
Tests that were creating their own minimal prelude to define BitAnd on
types are now pointed to
toolchain/testing/min_prelude/facet_types.carbon as the prelude. They no
longer need to `import Core` in each test as a result.
Such tests are no longer `no_prelude`, but instead have their own
prelude. So they are moved to a `min_prelude` subdirectory.
Closes#5076
This narrows the scope of the CRC to try to get better behavior around
mutex lock releasing on crash. Closes#5042.
This breaks apart `ProcessTestFileAndRun` because we need to process the
test file for `SET-CAPTURE-CONSOLE-OUTPUT`. The test file processing
should more reliably not crash than the core `Run` logic though, so
should be reasonably safe to put outside the CRC.
Also support --threads=1 for disabling threading. This is the flipside
for me of reducing how much is in the CRC: make it easier to run on a
single thread if the CRC gets in the way of debugging. This also means a
typical copy-paste execution of a single test will be single-threaded.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
This takes the mechanism currently used for autoupdate and expands it to
the regular tests (deliberately trying to unify logic for
test/autoupdate/dump to deliver consistent behavior). I'm seeing about a
85% reduction in test time, though results will vary based on test
system.
This does some small edits to test output to make it fit better with the
new flow. Note I'm stopping printing of the "here's how to run" on every
test by default, since it's autoupdated into file content by default.
However, it's still there for test failures.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Also makes the style guide explicitly comment on void, but this was the
intent IIRC because it matches Carbon's `-> ()` (and "always" versus
"except for void", which we definitely went back and forth on).
Includes adjusting function pointers, which I definitely forget this
syntax works sometimes.
Excludes utils/tree_sitter/src/scanner.c because it claims to be C, but
really we should probably fix that to be cpp.
Switching from RE2 to StrReplaceAll because it seems a fair fit for what
actually needs to be done here. Also pick up \t for visibility reasons.
This came up because clangd's LSP-related APIs print carriage returns.
In order to write language-server tests, we need some way to pass stdin
input. This adds support for a split "// --- STDIN" which will be
provided as a temp file for testing.
Note this does more stdin -> input_stream style renaming, this is just
bugging me more since I know shadowing works but it can be subtle to
read, particularly since I'm now making direct use of stdin in a handful
of spots.
As discussed in #4530 . This required switching to using
`llvm::IntrusiveRefCntPtr` in a number of places.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
One of the things that ClangRunnerTest is doing is capturing
stderr/stdout because clang prints to it directly. This adds support for
that to FileTest.
I'm renaming the current `capture_output` field to `dump_output` because
the name is ambiguous after this change, and the flag is already named
`--dump_output`. It's still not great, but at least it's more distinct.
Note ClangRunner still doesn't use the vfs; that still needs work. I'm
just moving the NoArgs test over as a trivial test of the functionality.
This opens the door for replacing all `library ...` lines in toolchain
test files with `library "[[@TEST_NAME]]";`. That's technically more
typing in a lot of cases, but OTOH means we can just do some copy-paste
boilerplate and stop carefully writing library names.
Also cleans up the test setup, because it's getting messy. I'm trying to
make it easier to see the divisions of tests and the output associated
with them. StringSwitch looked like a way to do this, with a few edits
to make it work nicely.
Discussed in the toolchain meeting today - we'd like to try having this
on by default and see if the cost isn't too high.
The nodebug test is a bit verbose, because it doesn't have the
`--exclude-dump-file-prefix` that test_file would usually add. Is there
a nicer way I could write this test to verify that --no-debug-info does
what it's meant to?
Just spotted these while looking at warnings that seem to fire on our
code are probably are things we'd fix if we saw them. None of these seem
important FWIW.
Also removes a redundant flag that is part of `-Wall`.
I have a follow-up for the high-value warning I spotted that motivated
me to look at all of this. But it's noisy so kept it as a separate PR.
The install directory contains the BUILD logic for creating an
installable tree of data files and executables for the toolchain, and
a library to facilitate toolchain code accessing the paths to their data
within this installation.
Then adds an installation of LLD in a synthetic LLVM installation, and
teaches the Clang runner to configure this and use it for linking
instead of the system linker.
Currently, the install paths only really manage access to the LLVM
binaries installed and used by the Clang runner for linking, but
eventually other data files like the prelude and runtime libraries will
be fleshed out as well. There are TODOs for moving more things over here
such as the prelude.
One interesting aspect of this is where to put helpers like parts of
LLVM in our install. This PR suggests nesting those files under
`lib/carbon`. While using a `lib` subdirectory isn't a perfect fit for
the FHS (Filesystem Hierarchy Standard), having a single location where
private data is collected is significantly superior to spreading them
across the system. This also matches similar patterns used by Clang
itself and several other language toolchains and standard libraries.
The install directory also provides a natural place for us to build out
packaging rules to create installable packages in various formats, but
that remains future work.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This handles toolchain failures per-file. The intent is to allow placing
both "success" and "fail" tests in the same file, using splits. However,
this PR only adds support and updates existing tests to continue
passing.
Lex now prints its yaml as:
```
- filename: name
tokens: [ ... ]
```
New support in file_test allows the `filename` marker at the top to
define the default file number for later lines, meaning multi-file
output from lexing is now associated with the appropriate file. Similar
support will probably also apply to lowering, semir, and other places
that print a filename once for the full dump.
This hammers a bit at how line number replacements work in file_test,
allowing stacking them so that lex errors and stdout can both be
line-associated properly. I've tried to make the autoupdate more
frequently work in one pass, now also taking into account the file index
when doing line replacements.
There are still some issues with EndOfFile that it may be good to
discuss: because CHECK lines are appended to the end of the file now,
and the EndOfFile token points at the last line including comments, new
lex tests now take two runs to autoupdate (because without CHECK lines,
the EndOfFile points at a content line, which content is then inserted
after). Note that removing CHECK lines from the test is not a solution:
autoupdate also started inserting blank lines, which breaks this for a
similar reason. One solution here might be to not have EndOfFile
associate with a line or column, which has been a bit of an issue
regardless.
Also fixes a small issue with toolchain's autoupdate script.
Specifically this should improve linking by producing one large binary
instead of one-per-directory. The inclusion of the driver hits the size
issue. Separating out things which have more llvm deps has been
discussed, but I'm not doing that here because I think the semantics
layer will need to depend on clang for interop, and we'd lose a lot of
the benefits that way. Also, having just one place to look seems
simpler.
Includes supporting changes to file_test infrastructure, the most
significant of which is probably passing tests via file instead of a
really large args thing, using a custom rule to do that. That's because
dealing with the layered filegroups that allow the toolchain setup is
more complicated, and this approach scales well.
Combined test time is ~9s, so not sharding right now.
I wasn't sure if people would prefer having the autoupdate script under
testing, so I left it alone for now.
Write unattached CHECK:STDOUT lines at the end of the complete test
file, not at the end of the first split file.
Also, perform line number remappings for the current file even if we see
a check line for an earlier file first. We used to stop performing
remapping after the first check line that referred to a previous file.
To facilitate this, instead of splitting the check lines up by output
file prior to forming the output, we instead form a single list of check
lines and have the check lines track which file they refer to.
I've migrated the toolchain autoupdate scripts here, I just need a
little more time to do the explorer side (which I need to check
performance, that may require multithreading as we do in the current
script). However, this felt substantial enough to share and it means I
can handle autoupdate in more of the toolchain, including preparatory
work for autoupdate on multi-file tests.
Once explorer is done I'll remove the old script.
This is a simplification of the construction, although somewhat limiting
(it means that the caller can't register the same file multiple times,
though I stopped doing that anyways since it was causing confusion).
What this more importantly _allows_ is logic on the FileTestBase child
itself that's not test-specific -- in particular, autoupdate
functionality which wouldn't use RUN_ALL_TESTS.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This is sufficient to convert remaining toolchain tests to file_test. %s
and %t are currently used. While #2978 might use %T with lit, I think
that's resolving a lit-specific issue that's not necessary when
TEST_TMPDIR is readily available for any necessary operations (i.e.,
setting the working directory). With ARGS, I think it's feasible to
switch to file_test without %T.
Also adds documentation to file_test_base.h, which was starting to feel
like a significant gap.
This is not yet handled by autoupdate, but I'm eyeing that next.
In explorer, we already support parsing a string_view, so use that. In toolchain, we need to build support, probably using vfs, so that's a todo.
bazel test //explorer:file_test --runs_per_test=5
- branch: Stats over 250 runs: max = 18.3s, min = 5.2s, avg = 11.2s, dev = 2.9s
- trunk: Stats over 250 runs: max = 22.3s, min = 5.9s, avg = 12.1s, dev = 2.8s
Not a dramatic improvement, but maybe more effective long-term, and this'd been requested on #2876
I'm looking at this as I start thinking about handling `import`. Syntax is based on llvm's `split-file` tool.
The `std::vector` -> `llvm::SmallVector` switch is minor, I'm doing it here because I had to touch everything anyways and I think for tests I'll lean slightly more towards the toolchain's way of doing things versus explorer's.
The intent of this change is that instead of paths looking like `explorer/testdata/foo/bar.carbon` (repo-relative), they're now just `bar.carbon` (local). The consequence is that paths should be a bit more durable in various environments, and just paths should be shorter and easier to read.
The explorer's prelude is an exception to this since it comes from data, rather than being the test target. Due to the change in approaches, it needs the regex again.
Uses #2829
This is really part of #2811, but is extracted out to allow a little review in parallelism because #2811 expects #2813. Getting this in will allow migration of toolchain tests, whereas #2811 is focused on explorer tests. For explorer test timing information, see #2811.
The syntax being used for matching deliberately mirrors the `FileCheck` setup, partly for compatibility if something changes, partly so there's nothing new to learn, partly so that we don't need to build more test updating.
Individual tests look like:
```
[ RUN ] ParseAndExecuteTestFile.explorer/parse_and_execute/testdata/assert/convert.carbon
To test this file alone, run:
bazel test //explorer/parse_and_execute:file_test.subset --test_arg=explorer/parse_and_execute/testdata/assert/convert.carbon
[ OK ] ParseAndExecuteTestFile.explorer/parse_and_execute/testdata/assert/convert.carbon (202 ms)
```
The printed command line is intended to assist developers in debugging a single test, particularly when sharding the main test. The use of a single `.subset` target means the total number of targets is constant even as the number of test files increases, which may be important for some `bazel` execution environments. I plan to make similar changes to the `glob_sh_run` implementation so that we have consistent setups, i.e. that we no longer create target-per-file scaling risks.
This uses `native_test` to share the test binary, avoiding re-linking if files are individually run.
Investigation did reveal a mistake where STDOUT/STDERR wasn't prefixed on empty output lines; this PR fixes that mistake, so that output is fully covered.
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Richard Smith
Jon Ross-Perkins
Thomas Köppe
Dana Jansens
josh11bandJosh L
David Blaikie
Chandler Carruth
