When forming a specific (previously called a generic instance), evaluate
the eval block of the generic to determine the values of any constants
used in that specific. The majority of the work here is updating
eval.cpp so that it can use the results of prior evaluations in the same
block when computing later values.
Include the computed results in the formatted SemIR output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
We can't use the instruction from the generic directly, because it
doesn't have the right constant value. Instead add an instruction that
models the transition from the constant value in the generic to the
constant value in the generic instance.
Also start associating the self generic instance with unqualified
lookups that find results in an enclosing generic, so that we track the
information necessary to create the new instruction.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Require types into which qualified lookup is performed to be completely
defined. Eventually this will trigger substitution into the definition
for generic types.
For each generic, build a list of instructions describing the
computations we need to do when resolving an instance of the generic:
this is a list of the instance-specific constants and types that the
generic uses. Another way of viewing this list is as a block of Carbon
SemIR code that is evaluated in order to form an instance of the generic
-- this is referenced in the code as the "eval block" for the generic.
For each instruction in the generic whose type or value is a symbolic
constant, replace that type or constant value with a symbolic reference
that says "to find the actual type or value, look at index N in the list
of values for the generic instance".
For an instruction with a symbolic constant value, we can just add that
instruction to our list. For an instruction with a symbolic constant
type, however, we may not have a corresponding instruction computing the
type within the generic and may need to build a new instruction, but
will reuse one where possible. In the case where we build a new
instruction, we use the existing substitution code to build the type
within the eval block.
For now, this transformation is only done in the declaration region of
the generic, not in the definition region. Also, we map back from the
symbolic references to the underlying constant value in a few places
where we will eventually need to do a lookup into a generic instance, in
order to avoid regressing the tests.
This executes on a TODO in AddImportRef to add instructions to their own
block instead of the File block. This has an important consequence of
removing a pattern from InstBlockStack that added to blocks not
currently at the top, cleaning up an issue for ArrayStack. The delta
here is then mostly in different formatting of the import refs, a
consequence of the separation.
By adding an `ImportDecl` instruction, this creates something that can
be referenced through `ImportIRInst`.
packages/no_prelude/implicit_imports_entities.carbon is getting a test
of this (import_conflict and import_conflict_reverse).
Also re-packs ImportIR from 24 bytes to 16 on 64-bit, since I'm touching
everywhere that makes one anyways.
This refactors how the implicit import is handled in order to retain
more name scope information. As a consequence, private access control
works better between api files and implementation files. Note though
that this will also be essential for name poisoning between the API and
implementation, as discussed in #3763.
In implementing this, I ran into a couple issues with namespaces that I
think point to flaws in their handling. I've fixed some and added a TODO
for the biggest issue (in check.cpp line 281-288), which relates to the
handling of namespaces of direct imports which are first evaluated
indirectly.
In a `class C(T:! type)`, the type `Self` should be `C(T)`, not merely
`C`. Similarly, in an `interface I(T:! type)`, the type of self should
be `I(T)`, not merely `I`.
In `ClassType`s and `InterfaceType`s, track a `GenericInstanceId` for
the instance rather than just the argument list.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Build a `Generic` object for generic functions. This object tracks the
generic parameters that are in scope for the generic entity. Eventually
it will track other information about the generic too.
Add basic SemIR formatting support for generic functions.
Name scopes store the names in their scope in a `DenseMap`. Several
places reasonably avoid depending on the iteration order by sorting the
names -- they're in the formatting code path where that's a solid
approach.
Unfortunately, when we're importing one scope into another, we also need
to walk the entire scope and do something for each name. =[ This doesn't
seem like a great place to sort things to stabilize them.
I've switched to a fairly simplistic solution of having a vector of name
entries that can be iterated stably, and a separate map for lookups. I
didn't use the set-of-indices trick here because it's not clear that's
the right trade-off for a scope: likely a lot of small scopes here with
relatively hot name lookups. And the key here isn't a large or
dynamically sized thing that we're canonicalizing, it's a `NameId`. That
made me lean towards duplicating the name in the hashtable for lookup
and the vector for iteration.
I thought about a fancy approach of sorting the hashtable keys by their
values (the indices), but that would still require a bit of copying and
more code.
I also thought a bit about other optimizations, but decided to leave a
comment for now -- it's not obvious to me exactly how hot this is and
whether it's better served by faster lookups, being more memory dense,
etc. And that might involve more of an SOA layout change or some other
approach. Rather than do that here, and especially before switching
hashtables, I stuck with a simple approach to address the ordering.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Model such calls as call operations, and compute the resulting type in
constant evaluation rather than in type-checking. This means we no
longer form non-constant `ClassType` or `InterfaceType` values, and that
we produce an `<error>` type in the case of bad argument lists rather
than a broken / meaningless `ClassType` / `InterfaceType` that doesn't
actually represent a type. This in turn suppresses some follow-on
diagnostics.
In some cases this is just a refactoring; in others, we no longer import
both an instruction in no block plus a constant instruction, resulting
in creating fewer instructions. The non-constant version of the
instruction always ended up unreferenced in the affected cases.
Following up on a comment in #4042.
Merges handle_let.cpp and handle_variable.cpp into a single file in
order to take better advantage of commonalities.
Both still have a bunch of kludges, and there's still divergent handling
in handle_binding_pattern that will yield different results. However,
this fixes some things about `let` like starting to make use of
global_init (imperfectly, due to how VarStorage works, I grant), and in
particular adding `let` names to a name scope, not just lexical lookup.
This is mostly mechanically duplicating work done for generic classes to
also support generic interfaces.
Also fix both generic interfaces and generic classes to support
importing class and interface types with arguments from another file.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Don't use the pretty-printed type name, because that's intended for
diagnostics, not for a theoretically machine-readable format like SemIR.
Types are always constants, so omit the leading `constant.` on the type
instruction name.
Don't format the *type of* the function `F` as `"F"`. Instead use
`"<type of F>"`.
Also improve instruction naming for function and generic class name
values: name the value after the function or generic class, and add a
`.type` suffix to the type.
Adds access to the name lookup table in name scopes. This is so that we
can quickly check access during name lookup without resolving the entity
itself. Does this for names in general, but does not implement handling
for entity-scoped names, only namespace-scoped names (where they're
essentially just not exported).
Excludes `private` names from exports. Although names should be
accessible to `impl` files, that's not implemented here because we'll
probably want to do it by directly copying name lookup tables.
Check the parameters specified in a name qualifier against the
parameters of the entity that the qualifier refers to.
For interfaces, this required adding minimal support for parameterized
interface names.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This has is a nice-to-have for me. Frequently I want to run a specific
test, and end up digging through output to be able to copy-paste the run
line. This uses TIP lines to inject the command into the file when using
AUTOUPDATE.
Note, one of the reasons I want this is because "bazel test
//toolchain/testing:file_test --test_output=all" has been regularly
exceeding bazel's output limit for me (workaround is either opening the
output file or specifying an obscure output limit flag), making it a
little harder for me to get the commands. However, frequently I'm adding
a file and want to iterate on it, so that's really the use case I have
in mind here.
Previously we did some of this in decl_name_stack and some of it in the
callers of decl_name_stack. Factor out a single place to pop a name and
its optional following parameters.
Part of making this behavior consistent is that we now track whether an
implicit parameter list was present or absent rather than mapping an
absent list to `InstBlockId::Empty`. This improves our redeclaration
checking and the precision of some diagnostics.
Parse the name of a declaration as a sequence of `NameQualifier`s --
which have a name, possibly parameters, and a trailing period --
followed by a name and possibly parameters. This prepares us for parsing
declarations of members of generic classes and similar cases, but
actually supporting such member redeclarations is left to a future
change.
We previously required functions to have parameters, but no longer do,
following the direction of #3848. Cases like namespaces that can't
actually have parameters are now diagnosed in check instead of in parse.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Modifies the core package and literal handling to use factory functions
for standard type literals.
Updates function/builtin/import.carbon to stop depending on the prelude,
since it would list all the impls in the core file. Updates
alias/builtins.carbon to be failing (the type values cannot be aliased).
Note, I assume this doesn't affect all the TODOs (like for i32.carbon),
but does cut some things down (and requires updating some tests that
have prelude name conflicts, but I think they were intended to be
updated this way).
Starts warning on duplicate "export name" because I'm updating name
lookup to make it work.
Need to think harder about how to handle cross-package "export import".
But adding some failing tests to sketch out what *should* work.
Change syntax for package declaration to put the `impl` keyword at the
start and remove the `api` keyword.
To support this, rearrange processing of package, library, and import
declarations to use the general modifier handling support in declaration
parsing rather than special-case logic.
There is an ambiguity in `impl package.Foo as Bar`, which we resolve by
treating `package` as an introducer after a modifier only if it's not
followed by `.`.
The toolchain was iterating a map of package name to import list in a
couple of places to do things beyond counting or other order-invariant
operations. The result was that the specific hashtable iteration order
influenced the order of SemIR generated (and other behaviors like
diagnostic emission I suspect, but the source location sorting probably
hid this). Switching to a hashtable implementation with any order
seeding that changes run-to-run immediately shows the SemIR order
fluctuating without this.
This PR fixes that by instead accumulating the package imports data in a
vector and using a map to vector indices. This is also slightly more
efficient, although that seems unlikely to be an important factor here.
There was only one insertion point so I've just hand coded the
management of the indices and map, but happy to take a different
approach or use an abstraction here if desired.
One awkward aspect of this is that some of the loops need access to the
package name as well. I've just added storage for that as these seem
unlikely to be huge arrays of 10s of 1000s of imported packages, so the
double storage of the identifier ID seems likely OK. But again, happy to
take a different approach here if desired. It also seems like it might
be possible to work out the identifier from the node, but I kept the
patch more direct for simplicity.
I've also not used the LLVM `MapVector` abstraction of this pattern.
This was mostly to avoid adding another layer of abstractions to our
data structures, and because this is the first time we've hit this
really. My experience is also that it is reasonably often that there is
a more efficient way to orient the vector and map than what is
automatically provided. But that may just be my experience.
This adds a `BindExport` instruction in order to better track the
location of the `export` itself, but a `bind_name_id` is also added to
`ImportRef` so that we know quickly where to put it in name lookup.
Merging identical names is a TODO. I haven't quite decided how best to
achieve that, because I do think the BindExport should be what's
actually added to name lookup.
Also, I will probably add a mode to DeclNameStack that blocks
non-namespace scopes. This seems to already be an error, but the wrong
one (maybe due to lack of support for cross-file decl/def support).
This is modeled analogously to FunctionType. So far, GenericClassType
has no operations, but eventually values of that type will be callable
like values of FunctionType.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This addresses the const reliance of ResolvePrevInstForMerge by checking
the imported instruction, testing with `alias` name conflicts. Given the
need to examine structure, the helper function feels like it now gets in
the way, so I'm just removing it.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.
Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.
So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Change the names for emitted globals for constants with storage to
include both the name of the constant and the name of the use.
This causes the instructions to also be named in SemIR and in LLVM IR
constants.
We don't need it any more, and removing it simplifies a few things:
- One fewer predefined `File` and reserved ID.
- We now have simply `Builtin` instructions for builtins, instead of
having an `ImportRef` that indirectly references a `Builtin`.
- `ConstantId`s now always refer directly to a local constant, instead
of sometimes referring to an `ImportRef` for a constant in the builtins
IR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
First steps towards using constant values in lowering.
For now, we reuse the regular instruction lowering to lower constants.
This mostly works, because we don't actually need an `llvm::Function` or
a current basic block when lowering a constant most of the time.
However, a special case is needed for lowering aggregate value constants
because they would otherwise create a stack alloca to store the
constant. Separate constant lowering code will be added in a future
change to clean this up.
When lowering a constant initializing expression, the result is a value
of the destination type, rather than code to initialize the destination,
so a separate copy step is required when finishing initialization from a
constant for a type that uses in-place initialization. Handling this
required extending `ReturnExpr` to track its destination location.
We currently often create non-constant `*_access` SemIR instructions
that are only used by constant `*_init` instructions. These cause
lowering to leave behind `getelementptr` instructions in the lowered IR
that are now unused. It should be possible to detect this case and avoid
producing these instructions, or to produce them lazily, but for now
we're just leaving them around for LLVM to clean up.
Use a level comparison during substitution to determine whether we're
substituting a particular binding. Evaluate symbolic bindings with the
same name and the same level to the same symbolic constant, for example
across redeclarations of a generic function.
In handle_class and handle_interface we assign TypeType, so is more
consistent. I think this had been missed because we haven't really been
using these declarations (historically, declarations didn't have a
type). It seems not to significantly affect output at present, although
I found this while trying to change merge behavior.
This doesn't actually track whether a declaration is `extern`. It does,
however:
- Factor out and expand merge support for classes, sharing handling with
functions.
- This makes the ClassRedefinition diagnostic redundant, as the
redeclaration checking overlaps.
- Add partial `extern` handling to class handling; just some
verifications of correct use.
- Factor out `extern` on member handling for sharing with `fn`.
- Fixes a bug in import_ref where a class's definition_id wasn't
assigned when defining.
This changes how a redefinition is handled (replaced, rather than
merged). I don't know whether that's ideal, but I think it results in
easy-to-understand consequences, and it's more consistent with how `fn`
works.
There's enough work here that this felt like a decent cut point,
particularly as the amount of work to actually add `extern` tracking
will be significant.
Factor out `SemIR::InstNamer` and also use it when lowering to LLVM IR.
Automatically name all instructions created with our `IRBuilder` based
on the name computed by the `InstNamer`, and likewise name basic blocks
using the label generated by the `InstNamer`.
Move some of the existing naming logic out from lower into `InstNamer`
so that it's also used in SemIR. In particular, we now name call
instructions after their callee, or after the builtin name for calls to
builtins.
Computing and adding these names isn't completely free. This instruction
naming is designed to be optional, so that we can turn it off for builds
where the LLVM IR will only be converted to assembly and won't be seen
by a human, but so far it's enabled unconditionally. We can tune that
later as needed.
Allow an explicit `as` conversion to convert between adapters and their
adapted types. Also make the value representation of an adapter be the
same as the value representation of the adapted type so that the
conversion is always possible.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Richard SmithandJon Ross-Perkins
Geoff Romer
Chandler CarruthandRichard Smith
