Impl lookup for an interface `I` for a facet with facet type requiring
an interface `I` will now succeed, getting the witness from the facet.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
If the query facet type has more than one interface, we must find an
impl that provides that interface for the query type for each interface.
This just looks like a for loop over the interfaces and ensuring we
found one impl witness for every one.
However the impl matching must change since it can't look at the
constant value of the entire query facet type for comparison with the
impl, as that query facet type may be for multiple interfaces and we are
looking to match an impl of a single interface.
To do this we break the query facet type up into each interface and make
sure the interface ids match. Then ensure that the impl was able to
deduce any generic parameters using the specific of the single query
interface.
There are some TODOs left here:
1. If the facet type for the query or the impl constraint has
"other_requirements" then we can't verify that they match since they are
lost. We fall back to comparing the constant id of the query to the
impl's constraint (after deducing generics in the impl). This correctly
eliminates mismatches but eagerly eliminates impls that could match the
query interface as well when there's more than one interface in the
query.
2. We don't return a witness for every interface in the query facet
type. Since we can't demonstrate any use of the witness there yet, for
cases that can have more than one interface in the query facet type,
this doesn't break anything that was previously working. The return
value is currently treated as a bool for cases with multiple interfaces
in the facet type (as a test for "can this be converted") but the
converted-to facet value's witnesses are unused.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.
As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
Here are some test changes so the diffs that come from my upcoming
functionality changes are easier to see. Upcoming functionality
includes:
* Compound member access with non-instance associated constants will
change to comply with the design
https://docs.carbon-lang.dev/docs/design/expressions/member_access.html#impl-lookup-for-compound-member-access
in #5059 .
* Impl lookup will add support for finding impl witnesses in facets
#5060
I'm also making the toolchain/check/testdata/impl/compound.carbon test
into a no_prelude version, and adding a version that tests with
importing.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
TODO to resolve whether it should conditionally say "object of"
depending on the category
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.
To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.
Some minor test changes:
- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.
As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
If the `impl as` clause is on a generic interface, the parameters to the
generic may be constrained by _other_ interfaces. This then requires
another impl lookup, but it should be looking for a different impl since
it's for a different interface.
To avoid considering the same impl again, we discard it from
consideration if the interface itself does not match the interface being
queried.
Note that the query FacetType can have more than one interface in it
eventually, and a `context.TODO()` call is left to notify when we run
into this.
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
These tests expose cycles during deduction, when the generic parameters
in an impl statement require deduction and the impl clause that
satisfies them comes after the one containing the generic parameters.
This causes the same impl to be looked at repeatedly, and produces a
cycle diagnostic.
---------
Co-authored-by: Geoff Romer <gromer@google.com>
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
* For class types, use `RequireCompleteType`
* For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
* Resolving for member access or actions that require impl lookup.
* Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
Treat template bindings as introducing template phase, and propagate it
in the same way we propagate the checked generic phase.
Rename "symbolic" to "checked symbolic" to make room for "template
symbolic". Also rename "phase" to "dependence".
Cycles are defined as reaching two independent lookups in a chain that
have all the same types involved. The acyclic rule states that this is
not possible and results in an error:
https://docs.carbon-lang.dev/docs/design/generics/details.html#acyclic-rule
To do this we need to track the types involved in impl lookup. The
interface constant includes the whole facet type being looked up, which
includes any specific types for generics or where constraints. Thus we
just need to compare the constant ids to look for this condition.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Currently it returns false which just ends typechecking. Instead handle
the error state later and avoid firing overlapping diagnostics in
'extend impl as'.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
If 'extend impl' is invalid, mark the impl as invalid by putting an
ErrorInst in the witness_id field.
The construction of the witness_id can otherwise return an ErrorInst but
impl lookup was not checking for that. Now have impl lookup check for an
error there before attempting to deduce generic parameters, which avoids
infinite recursion through deduction in cases like a cyclical impl of
itself.
Adds a testcase for infinite impl-of-itself lookup found by fuzzer.
BuildValueRepr is used to determine the value representation of a type,
but the instruction determining the type may be an indirection through
to another instruction, such as a TupleAccess with `T.0` or a
StructAccess with `T.f`. In these cases, step through the indirection
and try again on the resulting type.
This eliminates a crash as these Access instructions do not resolve to a
type themselves and would otherwise end up in this FATAL line:
```
CARBON_FATAL("Type refers to non-type inst {0}", inst);
```
While here, remove the reference to TupleIndex in typed_insts.h as it
has been subsumed by TupleAccess in 7f930d0f58.
ClassElementAccess is not yet handled, but a fail_todo test is added. It
fails because `ConvertToValueOfType()` in `ExprAsType()` returns a
non-constant value for a ClassElementAccess instruction, where it must
not for a StructAccess.
AsCompatible changes a source instruction's type to a compatible type,
so it also needs its constant value to take on the compatible type.
Otherwise the type of the instruction and its constant value will
differ, which makes moving to the constant value into a lossy
transformation.
Part of #4868
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Based on [the lastest thinking on
#4672](https://github.com/carbon-language/carbon-lang/issues/4672#issuecomment-2606209281)
, require a full syntactic match for impl redeclaration, instead of
excluding the `where` restriction. This means no updates to the impl
witness on redeclaration, and no diagnostics that those updates are
consistent.
Not included in this PR, but will need to be done in the future:
* Support for assigning values to associated constants in the body of
the impl definition. This will require moving the checking that
non-function associated constants are set from the definition start to
definition end.
* Identify semantic redeclarations that are not syntactic matches to
give a failed redeclaration diagnostic. This should be done once we are
already identifying impl declarations with the same type structure in
order to require they be identified in an impl_priority/match_first
block.
* Merging of the functions in `check/impl.cpp` that are now always
called together.
Also add some test coverage of `where` parsing I developed in PR I've
now abandoned because of this new simplification of the impl
redeclaration semantics.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.
When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.
Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.
Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.
See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Fixes a crash, see the new regression test in
toolchain/check/testdata/impl/no_prelude/generic_redeclaration.carbon.
Stopping merging seems like the most straightforward way to prevent
references to generic regions with the incorrect block.
With this change, we now support impl of interfaces with non-function
associated constants.
Also:
* Make impl diagnostics use more consistent names
* Make some impl tests "no_prelude"
Still to do:
* Facet type resolution as a separate, reusable step
* Using the assigned values of associated constants (see
`fail_todo_use_assoc_const.carbon`)
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
This change deliberately breaks away from the line/column ordering, and
instead focuses on a last byte offset corresponding to the final token
processed as part of producing the message. Where that's equal, this
maintains stable ordering in order to reflect the order that diagnostics
were produced.
The intent of this approach is that lex, parse, and check diagnostics
are interleaved based on where they are produced, but that
subexpressions still have diagnostics emitted prior to containing
expressions. In particular, the prior line/column sort essentially
sorted on the _start_ of where a diagnostic was associated, and this is
closer to sorting based on the _end_. As a consequence, something like
`F(1 2)` will have the error for `1 2` emitted _before_ a diagnostic for
`F(1 2)` not matching parameters, instead of _after_.
In check, we track the last handled node. This provides a
last_byte_offset _separate_ from where a diagnostic is associated. The
intent is that this creates an ordering of diagnostics which may be
associated with earlier code, to cause the diagnostics to be emitted
later. An example consequence of this is the change in ordering of
modifier diagnostics: we are diagnosing those from the same place, but
they have the same last_byte_offset, so we print them out in the order
produced.
I've added similar tracking to parse, but cannot identify any test which
is affected by it (note the separate commit, I thought about this late).
I'm not sure whether we have good out-of-order errors we could produce
for this.
A significant number of tests have reordered diagnostics as a
consequence of this change, so this change does not add further testing.
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.
Per #3407, disallow namespace declarations anywhere other than at file
scope for now.
We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
* Implement ignoring the difference between `Self as` and `as`, as well
as `where` clauses at the end of an `impl` declaration when checking
whether `impl` declarations match, from #3763.
* Allow impl declarations with different constraint ids to match, as
long as the facet type of the constraint has the same interface_id and
specific_id.
* Add some TODOs reflecting future facet type resolution.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Geoff Romer
Boaz Brickner
Richard Smith
Calvin
David Blaikie