This is in anticipation of making the integer value store be customized
heavily. I'd like to extract it from the common code when doing that, so
first disentangling them here without any intended change in
functionality or behavior to enable that.
I've tried to update `#include`s to be as minimal as I can and added a
few missing includes spotted in the process.
I've split the test for value store to include what was easy focused on
just the value store templates rather than the unified shared value
stores.
This might surface some opportunities for adding more tests, but for
this PR, just doing the minimal restructuring.
A good first-pass, at least. (abstract adapters are rejected with this
change, though pending further language design discussion)
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When profiling, these jumped out as good inline candidates that happened
to be out-of-line, this just moves them inline so that they're
available. I think as much as 10% improvement in check-phase from this,
but I haven't run detailed before/after measurements as these changes
seemed minimally disruptive.
Also switched from `CHECK` to `DCHECK` in one place that seems
especially hot and where the check itself seems reasonable to only do in
debug builds. Left a comment since we rarely need to remove these any
more.
llvm::function_ref (like std::unique_ptr, for instance) already has a
null/empty state, so use that to avoid confusion/duplication of empty
states between optional and the nested function_refs.
With this, we now check:
* The left argument to `where` is a facet type
* The right argument of a rewrite (`=`) requirement converts to the type
of the left argument.
* The left argument of an `impls` requirement is a type and the right
argument is a facet type.
No checking is done for `==` constraints yet.
In addition, make the "is facet type" query into its own function and
fix some comments noticed as part of this change.
This change reveals that accessing the members of a facet, like `.Self`,
isn't doing the right thing, and will have to be fixed in a follow-on
PR. Some tests have been adjusted or disabled as a result.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Without researching, I think this just predates the templating. Also
refactoring the body since there's not really a benefit to having each
line be its own expression, and the `arg.loc_id.node_id()` is a little
indirect when `node_id` is an argument.
This change accomplishes the TODOs for access checking. More
specifically it,
- makes `SemIR::AccessKind` formattable using `llvm::formatv`.
- makes use of `LookupUnqualifiedName` to find `Self`.
Instead of the `call` instruction having a block with one argument per
explicit argument, preceded optionally by `self` and followed optionally
by a return slot, change the `call` to store only the *runtime*
arguments. Store an index on the runtime parameters to make it easier to
determine the correspondence between arguments and parameters in a call.
Compile-time parameters, whether implicit or explicit, are no longer
included in the call argument list. Instead, they're tracked only in the
`specific_id` on the callee.
For calls to generic classes and generic interfaces, it no longer makes
sense to form a `call` instruction, given that the entirety of the
result is determined by the `specific_id`, which is now formed when
checking the call. Instead, the `call` instruction now only models
function calls, and not calls to other kinds of parameterized entity
names, and we create a `class_type` or `interface_type` instead of a
`call` instruction to model these kinds of calls. Notionally the model
here is that we're following the #3720 approach for calls, but for now
we inline the `Call.Op` function when forming SemIR.
We now also track the enclosing specific for a generic class or generic
interface that appears within an enclosing generic. This is necessary in
order for deduction of the inner generic parameters to not get confused
by the outer generic parameters being absent.
In order to not regress diagnostics, the template argument deduction
mechanism has been extended to specify the name of the parameter we're
deducing against when possible, and call arity mismatch errors are now
diagnosed before performing deduction rather than afterwards.
This switches `DCHECK` and `FATAL` as well.
The goal is to reduce the code size impact of these assertions so that
we can keep more of them enabled. Currently, the largest cost I see from
`CHECK` is not the actual check or the cold code itself, but actually
the failure to inline trivial functions due to the presence of the cold
code. This means that our goal isn't to reduce apparent code size in the
final binary but the LLVM IR cost assessed for these routines in the
inliner, which closely correlates with code size but is a bit different.
As discussed in #4283, experimentation shows that a single function call
with a minimal number of arguments is the lowest cost model for these.
This is easily achieved with a format-string API that internally uses
`llvm::formatv`. This PR is essentially the `CHECK` version of #4283.
However, the check macros are substantially harder to make work with
both format strings and streaming because they also take a condition.
Also, unexpectedly, I was very successful at devising a regular
expression based automated rewrite from the streaming to the format
string form with only low 10s of manual fixes. This includes compacting
strings broken up across lines, etc. Given how well that went, I've
prepared this PR which just directly switches to the format string API
and migrate everything to use it.
One nice side-effect is that the format string approach ends up greatly
simplifying the implementation here as well.
This is ... *shockingly* effective. Parsing speeds up by more than 3%
with just this change. And checking speeds up by **8%** with this change
alone:
```
BM_CompileAPIFileDenseDecls<Phase::Parse>/256 86.3µs ± 1% 82.9µs ± 1% -3.94% (p=0.000 n=17+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/1024 431µs ± 1% 415µs ± 1% -3.76% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/4096 1.77ms ± 1% 1.71ms ± 1% -3.18% (p=0.000 n=18+19)
BM_CompileAPIFileDenseDecls<Phase::Parse>/16384 7.44ms ± 1% 7.17ms ± 2% -3.56% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/65536 30.7ms ± 1% 29.7ms ± 1% -3.15% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Parse>/262144 131ms ± 1% 127ms ± 1% -2.81% (p=0.000 n=18+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/256 878µs ± 2% 800µs ± 1% -8.91% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/1024 1.88ms ± 2% 1.72ms ± 1% -8.56% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/4096 5.78ms ± 2% 5.28ms ± 1% -8.70% (p=0.000 n=20+18)
BM_CompileAPIFileDenseDecls<Phase::Check>/16384 21.9ms ± 1% 20.1ms ± 1% -8.02% (p=0.000 n=18+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/65536 90.4ms ± 2% 83.1ms ± 1% -8.04% (p=0.000 n=19+20)
BM_CompileAPIFileDenseDecls<Phase::Check>/262144 381ms ± 2% 352ms ± 1% -7.79% (p=0.000 n=19+19)
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Add these interfaces to the core library. For now, they're two separate
interfaces because we don't yet support one interface extending another.
This collapses a lot of the layering in check: for example, the call
building logic depends on implicit conversions, conversions now depend
on the overloaded operator machinery, and that machinery depends on
building calls.
In passing, improve the diagnostics for failing to find a name required
from the prelude. Also convert all the transitively-called code from
`NodeId` to `LocId` given the latter is what the conversion machinery
has available.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Remove `ReusingLoc` and add enforcement that even for imported
locations, the kind of the parse node for an instruction matches the
kind specified in the instruction definition.
Change the node kind for a few instructions to `NodeId`:
- A couple of instructions had a typed node but could be created
implicitly with any node as part of a builtin implicit conversion. This
happened for `AddrOf`, `ArrayIndex`, and `Deref`.
- A bunch of instructions had `InvalidNodeId` as their associated parse
node kind but were actually always created with a location.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
The TODO for switching to ReusingLoc (previously Untyped) had been there
for a while, so I'm trying to address it here. The intent had been to be
clearer about when the construction is validated, particularly so that
we aren't accidentally accepting an incorrect NodeId. Note, this does
fix an incorrect use of InvalidNodeId where NoLoc should've been called.
Since this changes the semantics of when `Parse::NodeId` is helpful in
`typed_nodes.h`, I'm doing a pass to either refine or switch to
`Parse::InvalidNodeId` where it compiles. I think most remaining
`Parse::NodeId` examples are things we _should_ be able to refine with a
little more work (versus before where `Parse::NodeId` also indicated
`LocId` construction might be used).
I'm also changing context.h to use `requires` that match what
`LocIdAndInst` has, I think it makes the diagnostics a little better.
And note I do add an overload for `ImportIRInstId`, also matching
`LocIdAndInst`, and widely used for import refs.
This prepares us for modeling associated entities of parameterized
interfaces.
We don't use the interface parameters when type-checking `impl`s or uses
of interface members yet, but we do now check interface arguments during
`impl` lookup.
Move subtree sizes over to TreeAndSubtrees, using the different
structure to represent the additional parse work that occurs, as well as
making it clear which functions require the extra information. My intent
is to make it hard to use this by accident.
The subtree size is still tracked during Parse::Tree construction. I
think a lot of that can be cleaned up, although we use it during
placeholder assignment so it may take some work. I wanted to see what
people thought about this before taking action on such a change.
I'm using a 1m line source file generated by #4124 for testing. Command
is `time bazel-bin/toolchain/install/prefix_root/bin/carbon compile
--phase=check --dump-mem-usage ~/tmp/data.carbon`
At head, what I'm seeing is:
```
...
parse_tree_.node_impls_:
used_bytes: 61516116
reserved_bytes: 61516116
...
Total:
used_bytes: 447814230
reserved_bytes: 551663894
...
1.43s user 0.14s system 99% cpu 1.565 total
```
With `Tree::Verify` disabled completely, it looks like:
```
parse_tree_.node_impls_:
used_bytes: 41010744
reserved_bytes: 41010744
...
Total:
used_bytes: 427308858
reserved_bytes: 531158522
...
1.20s user 0.13s system 99% cpu 1.332 total
```
Re-enabling just the basic verification (what is now `Tree::Verify`),
I'm seeing maybe 0.05s slower, but that's within noise for my system. I
do see variability in my timing results, and overall I think this is a
0.2s +/- 0.1s improvement versus the earlier (always testing `Extract`
code) implementation. That's opt; debug builds will be unaffected,
because the same checking occurs as before.
Note, the subtree size is a third of the node representation, which is
why I'm showing the decrease in memory usage here.
As discussed in toolchain meeting, we want to avoid overloading the
meaning of "instance", and "specific" was the best name we found. It's a
little unorthodox and inventive, but hopefully over time will become as
unsurprising as the term "generic" is.
We can't use the instruction from the generic directly, because it
doesn't have the right constant value. Instead add an instruction that
models the transition from the constant value in the generic to the
constant value in the generic instance.
Also start associating the self generic instance with unqualified
lookups that find results in an enclosing generic, so that we track the
information necessary to create the new instruction.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
I'm trying to increase the distinction between BuiltinKind and
BuiltinFunctionKind. BuiltinKind is for instructions,
BuiltinFunctionKind is for function definitions. To get to this point,
I'm doing a few changes:
- BuiltinKind -> BuiltinInstKind
- builtin_kind.* -> builtin_inst_kind.*: filename consistency
- Builtin -> BuiltinInst: mainly for consistency with the above
- Builtin::builtin_kind -> BuiltinInst::builtin_inst_kind: somewhat
repetitive but seems like a consistent edit
- Function::builtin_kind -> Function::builtin_function_kind: seems a
useful distinction
I'm leaving alone things like (and mentioning in case there's a desire
for more renames):
- InstId::BuiltinError, InstId::ForBuiltin: these I think are more
apparent because they're directly associated with Inst.
- GetBuiltinICmpPredicate in lowering: maybe builtin function handling
should be in its own file, but these local names don't feel problematic
to me.
- GetBuiltinType, BuildBuiltinValueRepr, PerformBuiltinIntComparison:
similar to the above, names don't feel too problematic
Require types into which qualified lookup is performed to be completely
defined. Eventually this will trigger substitution into the definition
for generic types.
This executes on a TODO in AddImportRef to add instructions to their own
block instead of the File block. This has an important consequence of
removing a pattern from InstBlockStack that added to blocks not
currently at the top, cleaning up an issue for ArrayStack. The delta
here is then mostly in different formatting of the import refs, a
consequence of the separation.
Creates a `GlobalInit` class for storing relevant values, pulling
functions off `InstBlockStack` and `Context`. Adds a `Context` pointer
just so that it doesn't need to be passed in on each call (`Finalize` in
particular uses several members).
Note we have several different `InstBlockStack` instances, so several
copies of the relevant members were simply unused.
This undoes a previous change to unify them, and I think at my advice.
=[ Sorry about that, I think I was just wrong.
Specifically, I think I had suggested that it would be more efficient to
have a single shared hashtable of strings. The more I look at profiles
of the toolchain, the less likely that seems. Specifically for
identifiers and string literals it seems especially problematic.
Using a single, joint hashtable is likely a good idea when all of the
different querying code paths are equally likely, the strings follow the
same distribution of sizes, and either there is no clustering of access
to different sets of strings or none of the sets are meaningfully small
enough to fit into a lower level of resident cache.
I think essentially none of these predicates actually hold for
identifiers vs. string literals:
- Identifiers are *much* more hot
- They have wildly different size distributions.
- The access patterns are very clustered
Sorry for the misleading advice on that one.
While splitting them, I've worked to simplify the code a bit by building
a way to have the `StringRef` holding canonical value stores not require
specializations, and so we get a pretty large code cleanup in the
process here.
This works to leverage the capabilities of the hashtable as much as
possible, for example using the key context in the value stores.
However, there may still be opportunities to refactor more deeply and
use the functionality even better. Hopefully this is at least
a reasonable start and gets us a clean baseline.
On an Arm M1, this is a 15% improvement on my large lexing stress test,
but ends up a wash on my x86-64 server. This is a smaller benefit than
I expected, and it's because we're using a set-of-IDs and looking up
values with a key context for things like identifiers. This pattern has
a surprising tradeoff. The new hashtable uses significantly less memory,
a 10% peak RSS reduction just from the hashtable change. But indirecting
through the vector of values makes growing the hashtable dramatically
less cache-friendly: it causes growth to randomly access every key when
rehashing. On x86, everything gained by the faster hashtable is lost in
even slower growth. And even on Arm, this eats into the benefits.
But I have a plan to tweak how identifiers specifically work to avoid
most of the growth, and so I suspect this is the right tradeoff on the
whole. It gives us significant working set size reduction and we can
likely avoid the regressed operation (growth with rehash) in most cases
by clever reserving and if necessary by adding a hash caching layer to
the table infrastructure.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When checking a declaration or definition of a generic, track a list of
created instructions that depend on the generic's parameters in some
way, along with information on how they depend on the parameters. This
will eventually be used to determine what information we need to compute
when creating instances of the generic, but for now we're just building
the list.
Information is tracked separately for the declaration region and the
definition region of the generic, because in general these may be first
provided in separate declarations, and they should be substituted into
at different times.
Also add a corresponding value store and YAML output.
We don't create any generic instances in this change; this is just
adding infrastructure for future changes.
Build a `Generic` object for generic functions. This object tracks the
generic parameters that are in scope for the generic entity. Eventually
it will track other information about the generic too.
Add basic SemIR formatting support for generic functions.
This is mostly mechanically duplicating work done for generic classes to
also support generic interfaces.
Also fix both generic interfaces and generic classes to support
importing class and interface types with arguments from another file.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
With private modifiers, we'll want to start checking modifiers later,
e.g. after a name conflict is detected (and potentially merged). I think
we've agreed to be more explicit about whether the modifier functions
are manipulating state, versus trying to keep the state on the stack a
little longer (moving Pop to the end of these functions).
Removing FileScope from the stack and renaming it to DeclIntroducerStack
to better reflect the usage and behavior. The FileScope mostly reflects
an approach that wasn't ultimately adopted.
Trying to conform with #4009. Changes SemIR::LocIdAndInst construction
to root out struct init cases with AddInst and related functions. I'm
using templating of AddInst functions in order to avoid `AddInst(loc_id,
InstName{...})` and instead have `AddInst<InstName>(loc_id, {...})` with
I think similar readability results. There are a couple cases where inst
construction is templated and so designated initializers couldn't be
used, so this may be better for those in particular due to the extra
type enforcement.
This probably doesn't clean up every last case, but I was trying to get
the bulk at once without bleeding over into less related changes.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Switch from recursing into non-canonical instruction fields to
separately canonicalizing those fields. This means we now form canonical
`InstBlockId`s, `TypeBlockId`s, `IntId`s, `FloatId`s, and `BindNameId`s
at least in the cases when they're referenced by a constant instruction.
This reduces the overall runtime for @chandlerc's 10MLoC example by
27.5% on my machine.
This adds a `BindExport` instruction in order to better track the
location of the `export` itself, but a `bind_name_id` is also added to
`ImportRef` so that we know quickly where to put it in name lookup.
Merging identical names is a TODO. I haven't quite decided how best to
achieve that, because I do think the BindExport should be what's
actually added to name lookup.
Also, I will probably add a mode to DeclNameStack that blocks
non-namespace scopes. This seems to already be an error, but the wrong
one (maybe due to lack of support for cross-file decl/def support).
This is modeled analogously to FunctionType. So far, GenericClassType
has no operations, but eventually values of that type will be callable
like values of FunctionType.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This was to track use of a declaration after import, prior to a
redeclaration. Per [discussion on
Discord](https://discord.com/channels/655572317891461132/1217182321933815820/1236016521059237962),
we likely don't need this check due to the change in behavior of
`extern`.
Rather than potentially getting one of many `extern` decls and depending
on it by accident, it is now planned to be _required_ to be imported,
and the library doing a non-`extern` decl must _know_ it's importing the
`extern` decl. The stricter requirement on the library means it now
seems more reasonable to use the `extern` decl.
So kind of rolling back #3831, though keeping `ImportIRInstId` (at least
for now) and keeping `Loaded`/`Unloaded` terminology (seems a nicer
fit).
This removes the builtin FunctionType, replacing it with a FunctionType
instruction. The constant for a FunctionDecl is now a StructValue with
type of FunctionType.
Note this means a function declaration produces _both_ a type, and a
value of the type. This has some consequences in terms of circularity,
and makes the importing of function declarations a little more complex.
It'll get particularly peculiar for imports because of the behavior of
the reference, but that's a known issue due to other things such as
`alias`. The impact will hopefully be contained to
ResolvePrevInstForMerge (and ImportRefs).
To note a small formatting change in diagnostics:
```
- // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_member_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
- // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated <function> in Interface>` is not callable.
+ // CHECK:STDERR: fail_todo_facet_lookup.carbon:[[@LINE+4]]:3: ERROR: Value of type `<associated F in Interface>` is not callable.
```
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
As we talk about how imports should work, we want to start having
indirectly imported IRs in `import_irs`, where it's currently only
directly imported IRs. The tracking of `CheckIRId` is set up to be able
to determine whether an IR being indirectly imported is actually already
tracked (and may be a direct import). Changes here to how ApiForImpl is
handled start using the logic.
Note that indirect imports may be added while processing even the first
import from the current library. As a consequence, it's necessary to
prepare this map before starting imports, in particular, setting
ApiForImpl before any indirect imports may encounter the same import.
Also, prior validation that `num_irs` matches the final size are no
longer relevant.
check_ir_id is tracked on SemIR because I want to be able to figure it
out given an ImportIR, but the mapping is ephemeral after checking and
so I store that in Context.
I'm putting relevant logic into import_ref.cpp because the primary
alternative is import.cpp, and as more logic is added, ImportRefResolver
will be adding import IRs.
Adds support for unary `-` and binary `+`, `-`, `*`, `/` for floating
point types.
Real literals are now transformed to `llvm::APFloat`s during the check
phase into the `FloatLiteral` instruction.
This PR likely collides a bit with #3892 and might need to be updated
when that one is merged.
- Adds an empty prelude.carbon file
- Imports that file in any non-Core package file
- Adds --disable-prelude-import to avoid that
- Adds --exclude-dump-file-prefix to be able to hide files from dumping
- Used to hide core files (we can't do this by package name due to lex
dumps, for example)
- Restructures some tests to not rely on `i32`, particularly `alias`
tests (which rely on a name ref) and tests with no prelude.
I'm adding the framework for switching i32 to calling Int32 in the
prelude, but I'm running into a separate error actually switching over.
So that *mostly* works, but isn't quite ready for prime time. However,
maybe the current state of this PR is still useful to review since it
does a lot of the infrastructure work and adds the %Core everywhere?
LookupNameInDecl is only called from DeclNameStack, but I'm adding
mark_imports_used there because it feels more consistent. Not sure if we
want a better API boundary. I admit I'm also suspicious of its call to
LookupInCurrentScope but maybe it's okay due to how imports work.
I was choosing to print multiple diagnostics when a declaration is
previously used _and_ doesn't match because I think the "previously
used" is more important, but the "doesn't match" may give an additional
hint about why it didn't work.
The merge.h utility function is because I think we can follow a similar
model for identifying errors with other declarations: classes,
interfaces, etc.
This doesn't significantly change logic, although I'm trying to add the
location to used state.
The issue I'm trying to address is how to identify a declaration as
"allowed to be redeclared". Consider:
```
library "a" api;
extern fn F();
```
```
library "b" api;
extern fn F();
```
```
library "c" api;
import library "a";
import library "b";
var x: auto = F();
fn F();
```
What currently happens is:
1. On import of "a", `F` becomes ImportRefUnused
2. On import of "b", `F` becomes ImportRefUsed in order to merge.
3. In "c", the call `F()` doesn't change the state.
4. In "c", the declaration `fn F();` needs some breadcrumb to understand
whether "F" has been referenced, as in step (3) here.
What I want to happen is:
1. On import of "a", `F` becomes ImportRefUnloaded
2. On import of "b", `F` becomes ImportRefLoaded in order to merge.
3. In "c", the call `F()` causes `F` to become ImportRefUsed
4. In "c", the declaration `fn F();` detects that `F` is already
ImportRefUsed, and can use the associated `used_id` for a diagnostic
about why redeclaring is invalid.
Note this PR isn't implementing (4). I'm focused on the refactoring to
add a new ImportRef state here.
These can't be supported by `TryEvalInst`, because we don't track
sufficient information about predecessors and branch conditions in SemIR
to efficiently compute the constant result. Even if we could do so, we
may not want to treat all `BlockArg`s for which we can infer a constant
value as being constants. Instead, set the constant value explicitly
after creating the corresponding `BlockArg` instruction.
This replaces all invalid node IDs in import_ref.cpp with references to
the imported instruction.
This splits out ReplaceInstBeforeConstantUse into a separate function
when the LocationId is replaced, as for splicing. That's the less common
case, whereas others would need to provide the LocationId in order just
to not change the value.
The purpose of this change is to allow something such as a FunctionDecl
instruction to note an imported instruction as the "loc_id". Note that
doesn't occur here: this change is already very sweeping in edits. There
is no testdata affected, intended to show equivalent behavior.
We might want to consolidate NodeId references towards LocationId, but
if that's preferred, I'd still like to split it out. A lot of this just
piping through LocationId where it's a build error otherwise, enough
that imports should be able to start using it for diagnostics.
ValueStores are added but still unused -- just flushing out structure
for review.
Restructuring SemIRLocation is necessary to use LocationId this way. For
TokenOnly, it's not getting used in Parse, so I migrated it to Check and
it's now specific to SemIRLocation.
I also considered making LocationId reference an InstId (which would
need to be an ImportRef) instead of an ImportIRInstId. However, that
would've required import.cpp to add instructions for decls which are
reached during resolution -- we typically don't have an inst ready for
use. An extra inst is essentially 16 bytes in InstId's ValueStore + 4
bytes in LocationId's ValueStore, whereas this is 8 bytes per.
Chandler Carruth
David BlaikieandRichard Smith
josh11bandJosh L
Geoff RomerandJon Ross-Perkins
Brymer Meneses
Pablo Paglilla