As discussed around #3792, identify the import a diagnostic message came
from prior to the diagnostic message itself. This occurs during location
translation so that the logic can be central.
I'd considered associating the parse node with ImportRef instructions,
but I realized about halfway through that because I need to store the
ImportDirectiveId on the ImportIR for cross-package imports, it's there
for use in location translation without extra work. That saves a fair
amount of stringing it through declarations, as well as an oddity where
ImportRef instructions would have a node that didn't really represent
them.
Rename `BoolValue::FromBool` to `BoolValue::From` as requested in #3816.
Add `BoolValue::ToBool`.
Convert existing code to use these where appropriate.
In preparation for adding more builtins, factor out the handling of
builtin function kinds into separate files.
Add checking for builtin function signatures. The mechanism used here is
intended to provide a lot of flexibility for declaring generic builtin
functions and pretty arbitrary constraints on the types of parameters of
builtin functions. For now, these constraints are checked when the
builtin function is declared. The hope is that this will suffice, but if
not, it should be straightforward to switch to doing some of the
checking on call and share logic between the checks.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Since the addition of TranslateArg, I don't think this type is going to
go away (cutting a TODO). Refactoring names slightly to fit the current
role, and adding const to ConvertLocation.
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
Support is added for all overloaded operator interfaces in the current
design apart from `Assign`, which is going to require some more work to
properly handle, given that primitive assignment currently has a special
implementation for quite a few builtin types.
As we don't have support for generics yet -- in particular, generic
interfaces -- there is no support for `*With` interfaces, but homogenous
interfaces such as `Add` are supported instead.
Factor out building of call expressions so that overloaded operators can
generate calls.
Switch a few places from using specific kinds of NodeId to a general
NodeId. Because overloaded operators and other things like implicit
conversions can result in member access and function calls, those
operations can't require a specific kind of NodeId.
Add import support for associated entities, and fix import support for
interfaces and symbolic bindings. We now import interfaces in two steps,
first importing a forward declaration then a definition, just like we do
for classes. For symbolic bindings, we ensure that each BindSymbolicName
is imported only once, because its ID is used as its symbolic identity.
This is necessary because we (only) support operator interfaces that are
defined in an imported Carbon package for now.
The entire contents of `check/operator.cpp` should probably be
rethought. In particular, doing a lot of name lookups on each operator
is likely to be bad for performance. But this gets us to the point where
overloaded operators are basically working, which seems like a good
place to iterate from.
For now, the tests that the individual operators map to the right
interfaces are mostly generated by a script, but that's just because I'm
expecting a fair bit of churn in how we define the prelude and the
`impl`s -- in particular, when we add support for `AddWith`, we'll need
to update all the tests. The plan is to remove the script once things
settle down.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Still needs more merge/redeclaration logic for import semantics, but
this felt like a reasonable point to send a PR.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This change implements the check behavior for the arrow operator.
`ptr->Foo()` is rewritten as `(*ptr).Foo()` and `ptr->(X.y)` is
rewritten as `(*ptr).(X.y)`
Add a general substitution mechanism to support substituting symbolic
bindings with their values throughout symbolic constants and, more
specifically, types. This is done by decomposing the constant
instruction into its operands, substituting into the operands, and then
rebuilding the constant value by invoking the constant evaluator.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
Provide a general mechanism for determining the kind of the args of an
instruction. Use this to simplify instruction profiling a little. The
intent is to also use this mechanism as the basis of a substitution
mechanism, which will be part of a future patch.
Note that this causes us to do three table lookups and two indirect
calls in inst_profile per instruction, instead of one table lookup and
one indirect call. We can revisit this if it shows up in profiles.
This revamps the support for cross-package imports, making them look
more like a namespace. The planned model is mentioned on
[#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1217586076022210670).
This does not implement name lookup into the new namespace structure.
A few key changes in this PR (it's a little sprawling) are:
- Moves logic for adding package imports from context.* to import.*
- Remove SemIR::Import, which was the prior model. This is instead now a
SemIR::Namespace with the NameScope getting a new import_ir_scopes
field.
- Allow SemIR::Namespace to use Parse::ImportDirectiveId in addition to
the prior Parse::NamespaceId
- The import_ir_scopes field includes a NameScopeId so that as we
traverse to child namespaces, we can directly perform name lookup in the
other IR.
- is_closed_import now tracks whether a namespace comes from a different
package. This has a diagnostic implemented in decl_name_stack.
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
I'd kept these in to separate the bazel module update from the BUILD
file changes, then forgot about it. I think all of these can be cleanly
removed now. I think it's something we should clean up for consistency
with the bazel central repository names; I think it's best to reduce
that divergence.
llvm_zlib and llvm_zstd remain because of how llvm depends on the
particular names.
This was previously discussed at
https://discord.com/channels/655572317891461132/655578254970716160/1209975051588210729.
I'm initiating this mainly because we typically use "id" suffixes to
indicate an `IdBase` being passed around and the non-id suffix of
`parse_node` suggests at it carrying more data than it actually does.
There used to be more reason for avoiding `node_id` because
`SemIR::InstId` used to be named `NodeId`, but that's no longer
necessary. As a consequence, I'd like to rename `parse_node` to more
precisely reflect its type.
In full, this is doing:
```
parse_node_kind -> node_kind
parse_node -> node_id
ParseNodeCategory -> NodeCategory
ParseNodeKind -> NodeKind
ParseNode -> NodeId
```
This is primarily in check and sem_ir, but with some `parse_node_kind`
references in parse too.
Pluralization is consistent with name forms on both sides, so that
wasn't part of my replacements.
Add an instruction to hold the witness table, along with a corresponding
type to keep things simpler. Add `check/impl.{h,cpp}` to house the new
logic. No checking of impls against interfaces is performed yet.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
`Self` is modeled as a `bind_symbolic_name` with no corresponding value,
for now at least. In the future it might make sense to model it as a new
kind of instruction, or as a `bind_symbolic_name` whose value is a
`param`, but for now we just want it to introduce a symbolic constant.
In order to convert a value like the `Self` of an interface to a type, a
new instruction `facet_type_access` is introduced. This notionally
accesses the "type" field within a facet, converting it from a pair of
(type, witness) into just the type.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
When declaring an associated entity in an interface -- just associated
functions for now -- create an associated entity value and corresponding
type to represent a "slot in a witness table". Also track the list of
associated entities on the interface so that we will eventually be able
to check impls against them.
Associated entities are represented as the integer index of their slot
in a witness table.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
In `Class` we have:
```
// The following members always have values, and do not change throughout the
// lifetime of the class.
// The following members are set at the `{` of the class definition.
// The following members are accumulated throughout the class definition.
// The following members are set at the `}` of the class definition.
```
`Interface` has similar, minus the "accumulated" members. I'm echoing
this, except `Function` has no `}` members; at present, nothing
differentiates between "started definition" and "completed definition",
unlike the other two.
Also removing a slightly inconsistent default value for decl_id.
I'm proposing a different split, along the line of "what does this
relate to". I view impl.h as having started down this route. Moving the
inst store stuff to inst.h feels odd to me given how much else is there
right now, but maybe it's still the best approach. Some files only
contain a store, no structured class, but I felt the consistency in file
naming (without _store suffixes) might help.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
I believe this PR is sufficient to pull in all current class features,
including the current bits of inheritance which have been implemented.
Because a class declaration can reference its own type, this creates an
incomplete type prior to constant loading.
Right now, the object representation is imported proactively, but
individual fields are left as ImportRefUnused. This means that member
functions and similar will only be imported if called.
This also adjusts how function parameters are being handled, to match
the expectations of Self param structure.
When formatting, I'm starting to look into constants. Otherwise we get
"unexpected instref".
Overall, there are a few things that may be worth further discussion:
- The lack of a constant corresponding to the ClassType on ClassDecl is
inconvenient -- I'd like to see how zygoloid feels about trying to
restructure this. i.e., I'm setting a constant in order to be able to
track things down later, it'd be nice if the normal IR did this simply
for consistency, or if we were able to combine these rather than having
separate instructions.
- Should we shift the parse node tracking further, and go with a setup
wherein imports can embed import references into that? e.g., negative
values go to another array which includes a ImportIRId for printing
diagnostics, replacing the invalid NodeId.
- Can the formatter switch to a more general scan of instructions for
naming, to eliminate the ImportRef constant approach added here?
- GetExprValueForLookupResult special-casing instructions felt
surprising, I might see if there's a way to restructure to avoid that.
But I think these issues are things that can be separated out.
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
Similar to #3705, we actually have a mix of `Make` and `Create` in
factory functions too, so this PR is normalizing on `Make`. It's
intended to be consistent with the naming choice for Carbon factory
functions.
Note, MakeSyntheticBlock is the only one I feel a little weird about
because llvm's own APIs use Create, and this is essentially wrapping
LLVM calls. But the flipside is it also feels like a vague line to draw,
when we also differ from LLVM coding style in other ways.
- File::StringifyTypeExpr now has a case that hits the ImportRefUsed
TODO, so implementing that. I think the `static` approach will be
helpful in ensuring there aren't access bugs, particularly when future
support is added.
- `let` wasn't adding to exports because it doesn't use
`decl_name_stack` the way `var` does. This now adds to exports, but we
might want to unify logic for issues such as this.
- BuildImportRefUsedValueRepr is now called for another inst kind, and
it seemed like calling back to BuildValueRepr was the best way to
resolve this. I don't *think* that's going to cause recursion.
Note we may also want to do this with NameId, maybe some other things,
but the TypeId use is pretty broad and repetitive -- I thought I'd start
with it first.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
Collect the contents of an `impl` into a scope, and start doing very
basic checking for `impl` declarations and definitions.
This change adds two new `Id` types to the set of type that `NodeStack`
supports -- `ImplId` and `NameScopeId`.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
- Rename `ScopeIndex` to `ScopeId`, because the order is not meaningful.
This avoids collisions with `SemIR::ScopeIndex`.
- Change `GetScopeFor` to use an `if constexpr` chain rather than
duplicating the numbering logic across multiple functions.
- Simplify `GetNameFor`, avoiding multiple identical overloads.
As requested in review of #3683.
Right now, ConstantValueStore defaults to having unknown values use
NotConstant. This generally works for the current IR, but with imports
we're expecting sparse entries which are generally unknown -- and
distinguishing between NotConstant and simply unset would be helpful. As
a consequence, add Invalid.
We discussed whether to simply have ConstantValueStore default to
Invalid going forward, or to make the default flexible. The upside to
the former is consistency, the upside to the latter is that it should
result in fewer Sets when operating on the current IR (which will more
frequently have known non-constant values). This PR offers both
approaches in separate commits, but I somewhat lean towards the latter
for fewer array resizes.
Note, a totally different approach would be to use a different class
(not ConstantValueStore) for imported IRs -- then the default of Invalid
versus NotConstant would be type-dependent. However, I expect we're
going to want to do at least somewhat consistent lookups, and using the
same ConstantValueStore for both cases allows avoiding a virtual
interface or templating. Also, I'm hoping to only maintain the
ConstantValueStore for an imported IR as part of Context (not File),
which would mean the SmallVector storage overhead is ephemeral,
mitigating one of the potential advantages of using a different type for
imported IRs.
Consume the components of the `impl` declaration, and set up scopes for
the child elements. We don't yet build a representation for the impl
itself.
Also, add an interface type value. This is necessary so that we have a
value for the expression on the right-hand side of `as` in an `impl`.
I'm basically just nudging down the path I think is right here. Adding a
small bit more support, but also more tests to capture cases that I
think will need to be verified as working.
With diagnostics like "Value of type `<function>` is not callable.",
that's because it expects a FunctionDecl but is instead finding a
ImportRefUsed. I'll need to work out the necessary support for a
callable function.
One more (hopefully last) rename on the Import instruction renaming.
I was kind of tempted to rename to just "IRId", since the IRs aren't all
imports. However, this felt easier to read, and a better choice than
CrossRef because it's more consistent with the other ways imports exist
in code. (even if IRs aren't all imports, most use-cases are derived
from imports)
Note though that import_irs may include IRs not just from direct
imports. Beyond the builtin IR, I'm thinking that for indirect imports,
or the prelude, we may end up adding them. e.g., so that constants can
be generated for indirect imports and still correspond to a directly
known IR, and for a given IR that's indirectly imported multiple times
to be deduplicated locally. I'm not there yet, I'm just mentioning this
to help give background for naming thoughts.