In preparation for adding more builtins, factor out the handling of
builtin function kinds into separate files.
Add checking for builtin function signatures. The mechanism used here is
intended to provide a lot of flexibility for declaring generic builtin
functions and pretty arbitrary constraints on the types of parameters of
builtin functions. For now, these constraints are checked when the
builtin function is declared. The hope is that this will suffice, but if
not, it should be straightforward to switch to doing some of the
checking on call and share logic between the checks.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
For now, a builtin function is defined by specifying a string literal
initializer in a function declaration:
```carbon
fn MyBuiltin(a: i32) -> i32 = "builtin.name";
```
End-to-end support is included for a sample `"int.add"` builtin
performing integer addition, covering constant evaluation and code
generation.
The implementation here needs substantial refactoring before we'll be
ready to start adding more builtins. That refactoring work will be
coming next. This change is aiming to checkpoint some incremental
progress.
This revamps the support for cross-package imports, making them look
more like a namespace. The planned model is mentioned on
[#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1217586076022210670).
This does not implement name lookup into the new namespace structure.
A few key changes in this PR (it's a little sprawling) are:
- Moves logic for adding package imports from context.* to import.*
- Remove SemIR::Import, which was the prior model. This is instead now a
SemIR::Namespace with the NameScope getting a new import_ir_scopes
field.
- Allow SemIR::Namespace to use Parse::ImportDirectiveId in addition to
the prior Parse::NamespaceId
- The import_ir_scopes field includes a NameScopeId so that as we
traverse to child namespaces, we can directly perform name lookup in the
other IR.
- is_closed_import now tracks whether a namespace comes from a different
package. This has a diagnostic implemented in decl_name_stack.
When a member access names an interface member, perform impl lookup to
find the impl and its corresponding member.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add an instruction to hold the witness table, along with a corresponding
type to keep things simpler. Add `check/impl.{h,cpp}` to house the new
logic. No checking of impls against interfaces is performed yet.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When declaring an associated entity in an interface -- just associated
functions for now -- create an associated entity value and corresponding
type to represent a "slot in a witness table". Also track the list of
associated entities on the interface so that we will eventually be able
to check impls against them.
Associated entities are represented as the integer index of their slot
in a witness table.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds `BindAlias` with a hybrid of `BindName` and `NameRef` semantics. I
think it's slightly closer to `BindName` because it introduces a name,
so I'm going more in that direction. This also matches the need for
`bind_name_id` with imports on enclosing scopes.
Note, only things that look like a name reference are being allowed on
the RHS of `alias`. This includes builtins that look like name
references, such as `bool`, but not ones that turn into values
underneath, such as `false`.
Similar to #3705, we actually have a mix of `Make` and `Create` in
factory functions too, so this PR is normalizing on `Make`. It's
intended to be consistent with the naming choice for Carbon factory
functions.
Note, MakeSyntheticBlock is the only one I feel a little weird about
because llvm's own APIs use Create, and this is essentially wrapping
LLVM calls. But the flipside is it also feels like a vague line to draw,
when we also differ from LLVM coding style in other ways.
Collect the contents of an `impl` into a scope, and start doing very
basic checking for `impl` declarations and definitions.
This change adds two new `Id` types to the set of type that `NodeStack`
supports -- `ImplId` and `NameScopeId`.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a bit of a cleanup; I probably should've just renamed CrossRef
instead of adding ImportRefUsed.
Adding `is_builtin` to InstId is more about providing a standard API for
the check, which I expect to add a little more of.
Shifts import tests to validate that the BuildValueRepr CHECK isn't
accidentally hit.
Builds on #3656.
Under the prior "lazy" model, we had been planning to copy instructions.
Under the current "unused+used" model, we're restricting that to
constants. I'm trimming back some of the ResolveIfImportRefUnused logic
because it was more appropriate for the former model.
Right now, I'm adding ImportRefUsed direct creation in import.cpp for
namespaces. I think I'll need to do something similar in
RseolveIfImportRefUnused... I'm still trying to think about how to
manage type information there (which needs to come in as an import
reference itself, and probably have some amount of deduplication before
forming a TypeId). So ImportRefUnused lacks a type because I'm hesitant
to aggressively load it, whereas ImportRefUsed should *always* have a
type but it's just an error while I think things through.
For reference, ImportRefUnused and ImportRefUsed are mainly split in
order to track the boolean "used" without making fundamental
modifications to Inst for bit packing (this effectively instead packs a
bit into InstKind). AnyImportRef currently excludes the type because
it's mainly for diagnostic printing at the moment. It could end up with
a TypeId that would end up Invalid for ImportRefUnused, though it could
also be that the TypeId is only accessed when using ImportRefUsed
explicitly.
This makes some changes to the formatter so that ImportRefUnused and
ImportRefUsed will both be labeled as "import_ref" with an "unused ->
used" argument change in textual IR, but is otherwise not changing
logic.
This change adds a `BindSymbolicName` instruction for generic bindings,
paralleling the existing `BindName`. A mechanism is also added to allow
both kinds of binding to be accessed uniformly, for convenience in the
case where the two different kinds of binding are treated the same.
Generic bindings of type `type` are allowed to be used as types,
although no operations are provided for such types. For now lowering
treats these types as empty structs, which seems like a reasonable
lowering for non-monomorphized unconstrained types.
Adds a `LazyImportRef` instruction. Versus `CrossRef`, this is intended
to represent an instruction which cannot be used directly, and must be
replaced when it comes up due to name lookup. The intent is to use this
to avoid recursive loading of imported IR instructions.
Note, under this model, when `ResolveIfLazyImportRef` is called, it
essentially needs to load both inst and type information to a sufficient
point where any further attempts would hit name lookup again. That will
probably be complex, and the current implementation is just touching the
surface of the issue. I was heading down this route because it would
mean we have a limited number of points that need to consider whether
they're going to talk about a `LazyImportRef`.
I'm considering whether `CrossRef` should be dropped in favor of more
specific `Builtin` special-casing, due to the divergence of desired
behaviors. This could mean dropping the `builtins` IR since it's not
looking useful right now.
Modify `NameScope` to track whether the scope is associated with a load
error. This is to handle cases where one or more imports failed, so we
do not want to issue warnings for related scopes.
The 0-size on `ValueStore` comes up due to the changes to `NameScope`,
which make it too large for the default handling. After discussion with
zygoloid, the thought was we might want to try reserving a roughly
correct value based on parse node counts, but the stack default wasn't
buying much.
Fixes a bug where the implicit import used the package name instead of
the invalid identifier.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
I was suggesting this because `FloatingPoint` is pretty long. `int` and
`float` should be familiar abbreviations. `unsigned` should be familiar
to developers too, but `UnsignedInt` still feels usefully clearer for
the additional chars.
This adds instructions so that we get printing. I may adjust the
instruction format a little further to add a type, but I think the basic
setup will remain.
Note this builds on #3414
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Following up on discussion yesterday regarding this split.
Note, I'm expecting #3341 to do IdentifierId -> NameId in SemIR. It
might be worth adding NameId creation directly to StringStore if you're
content with this setup though.
Adds a `BoundMethod` SemIR node to represent an `x.F` bound method, with
a new builtin type `BoundMethodType`. Reorganized conversion of call
expression arguments to also check and convert a `self` parameter in the
implicit parameters list.
In passing, improved diagnostics and error recovery for bad call
expressions. We now build a `call` node with the appropriate type and
value category, but with invalid arguments, if the argument conversion
failed, and diagnose calls to non-callable expressions.
`addr self` methods don't work properly yet; the `addr` is ignored for
now.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add support for member access into classes, for both non-instance
members and for fields.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Track the fields in a class, and generate a corresponding struct type as
the object representation for the class. For now, we always use a
pointer as the value representation for a class.
This replaces the use of `VarStorage` in this case.
Add an `UnboundFieldType` type as the type of a field, in cases where
it's referenced without an accompanying object.
Add a `BindName` node to describe the name binding performed for both
variables and fields so that we can handle them more uniformly.
1. In general, `semantics_ir` -> `sem_ir`, to match the directory name.
2. For the list of `ValueStore`-related accessors on `SemIR::File`, add
them to `check`'s `Context` object, shortening access.
Finishing what #3316 started, add more bespoke ValueStore-like
structures to File. With this, the things which previously had somewhat
boilerplate Add/Get functions are now all on side classes, giving a
uniform style of API for calling.
Note, I was on the fence about making things public on ValueStore. If
it's preferred that I make some things there protected I certainly can,
there's just a trade-off that may mean more distinct child/wrapper
types.
This is a prerequisite for class support, where a class can be
referenced as a type before it becomes complete. For example, given:
```carbon
class A {
fn F(a: A);
class B {}
var b: B;
}
fn A.F(a: A) {}
```
we need to lower `B` before we lower `A`, even though `A` is used as a
type first.
This will also start catching some cases where we don't require a type
to be complete despite using it, as we now only lower types that are
required to be complete.
Remove the poison values for struct and tuple literals. We don't need
those any more, because we never generate references to those literals
as values, and we don't have a type to use for them because we never
require the type of a literal to be complete, only the type of the
entity initialized by the literal, which can be different, for example
when initializing an array from a tuple literal or a class from a struct
literal.
This doesn't affect the output: `llvm::Type` objects that are not
referenced by an LLVM module don't affect the IR for that module, and
the order in which `llvm::Type`s are created doesn't affect anything
either.
Building on #3313, start using ValueStore on File. Functions and classes
are straightforward. Types here I present as a borderline case where
maybe we want a more bespoke API, but maybe this is okay? Most other
things probably need a slightly different API, which although I might do
that for a consistent interface, felt more out-of-scope for this change.
Building on #3311, change SemIR to use the SharedValueStore. Since this
removes hermeticity, raw output no longer prints ints, reals, and
strings. TokenizedBuffer accessors are modified to return IDs because
values are often passed through in semantics without needing to read
them.
I would've put SharedValueStores on Context, except for the
GetArrayBoundValue convenience method. I felt awkward removing that, so
it's on File, at least for now. That's then used by the formatter and
Lower too. The flipside of this is that TokenizedBuffer has a
SharedValueStores only for printing, so maybe that's similar enough to
what File is doing.
This doesn't start shifting other SemIR members to ValueStore, but that
seems like a next step.
Using the computed value representation, fix lowering of struct and
tuple values to use the value representation rather than the object
representation. Fixes an issue found in the review of #3257.
This currently causes us to compute value representations of all types
as they are created, which generates substantially more SemIR to
represent types. We can get some of that back by deferring computation
of the value representation until the type is required to be complete,
but some of the additional cost here will persist with this approach.
I also considered making the computation of the value representation
type be something that lives entirely within the lowering phase, but I
think that's not the right approach in the longer term, because the
value representation will be semantically visible and relevant once we
start allowing it to be customized.
We should consider moving the nodes that exist to compute canonical
non-local types, including value representations, out into a separate
global block. That will clean up the SemIR representation substantially,
and make the SemIR produced for a function not depend on which types we
happen to have encountered beforehand. But that's not being done in this
PR.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Track the callee expression in full, instead of only tracking the
callee's FunctionId. This results in the `name_reference` denoting the
function actually being used.
Lowering now propagates a `llvm::Function*` as the value associated with
expressions of type `<function>`.
We were not creating `NameReference` node for names produced by member
access into a namespace, such as the second name in
`Namespace.Function`, which caused lowering of calls to such names to
fail. This is now fixed, but the resulting `NameReference` node only
refers to the name and the lookup result, not to the `Namespace.`
qualifier. We'll need to decide how to fit a third operand into that
node (perhaps we can stop storing the `name_id`, since it can be derived
from the lookup result) but for now the qualifier is not tracked.
Richard Smith
josh11b
