The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
Rather than just adding `Self` to the lexical scope, add it to the
class's name scope so that it is visible in later lexical scopes for the
same class -- in particular, for out-of-line definitions of members.
Also switch some tests in `check/testdata/class` over to making
idiomatic use of `Self` both inside a class and out-of-line, now that it
works more consistently.
Note that this does not permit using `Class.Self`, but only because we
don't yet support keyword names after `.` at all. If that changed, one
could use `Class.Self` to redundantly refer to `Class`. Whether we allow
that is left to a future decision.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
By adding a constant to ClassDecl/InterfaceDecl, we're able to remove
name reference special-casing. Use TryEvalInst on the Decl to generate
the Type. For ClassDecl, then use the generated constant for
self_type_id.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Do not create runtime name bindings for `FieldDecl`s even though they're
declared with `:`, so that we can still constant-evaluate references to
fields.
The constant value we associate with an initializing representation is
the object representation that the initializing expression will store to
its destination.
Also include the type in the profile of an instruction. This is now
necessary for array values, which are represented as tuple_value
instructions with array type, to avoid instructions with different types
being merged by constant canonicalization.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
BinaryOperatorAdd had been added early on as a proof-of-concept for
toolchain design for parsing -> checking flow. However, it doesn't
reflect the interface direction for operators, and now other portions of
the toolchain demonstrate the relevant logic. Instead, it's just a bit
of an outlier versus other instructions which have evolved over time.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Implement toolchain support for `returned var` and `return var`.
- Modeled `returned` in the parse tree as a `ReturnedSpecifier`
appearing after the `VariableIntroducer`.
- Modeled `return var` in the parse tree as a `ReturnVarSpecifier`
appearing after the `ReturnStatementStart`.
- Factored out the implementation of `return` statement and `returned
var` handling in check into a new `return.{h,cpp}`. The parse nodes
themselves are still handled in `handle_*.cpp`. This allows easy code
reuse between `return` and `returned var`.
Instead of ad-hoc conversion tracking on some kinds of nodes that
conversion creates, consolidate tracking into a single node kind. This
frees up an operand on `Init` instructions that can be used to store the
destination.
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
This turns out to somewhat block `package` support because there's a
fuzzer test-case that does similar. The parse is valid so we should
probably handle it reasonably.
I suspect the `let` test case might work with a little effort, given it
shouldn't really require much evaluation. On the other hand, `var`
definitely shouldn't, and `fn` will probably require something like
`constexpr` plus more substantial compile-time evaluation support.
Incomplete types may be nested within other types; for example, a tuple
type might have an incomplete type as an element. Handle such cases by
walking through nested incomplete types when completing a type. This is
done non-recursively in case a very complex type is formed.
Types are generally no longer completed at the point where they're
formed. Instead, we attempt to complete a type when it is used in a
context that requires a complete type, and diagnose if the type cannot
be completed at that point. This will be necessary for classes, which
can become complete after their first use, and helps tease out bugs
where a type completeness check is missing.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Combine the initialization, implicit conversion, and value category
conversion functions into a single function.
This substantially reduces the duplication between these steps, and
ensures that we support the same set of conversions in all these
contexts. This also fixes some issues where we would not use the proper
value representation for tuples and structs after performing implicit
conversions.
This makes the difference between errors and lower-level diagnostics
visible to users, and aligns the toolchain's behavior with the
expectations in `driver_fuzzer.cpp`.
The speculative insertion of StubReferences after elements in an
argument list turned out to not be necessary, because we decided we want
to insert per-argument initialization steps after all arguments are
evaluated, rather than interleaving them. The StubReferences we insert
are causing some minor code complexity, so remove them.
We still create StubReferences when performing patch-ups of
already-emitted code, but we no longer ever need to look through them
when determining whether an initializer was a literal or when evaluating
a type expression.
This implements initializing expression semantics for structs and
tuples, following #2006 and discussions since.
Tuple and (and analogously, struct) literals are treated as having a
mixed expression category that is later resolved based on how the
literal is used, as either a tuple initializer or a tuple value, at
which point we create a `TupleInit` or `TupleValue` that represents the
formation of the tuple initializer or tuple value from the tuple
literal.
There's quite a lot of TODOs here, and the SemIR representation is still
not quite right, but this seems like a good place to checkpoint some
incremental progress.
Building on #3214 and #3215, updates sem_ir yaml to be:
```
- filename: name
sem_ir: [ ... ]
```
Also, changes the textual format from `package { ... }` to `file
<filename> { ... }`. My thought on packages there is:
```
file "foo.carbon" {
package MyPackage
...
}
```
The reason for putting the file first is that it's easier if we put what
we're grouping on first, whereas the package is an "annotation" on the
file.
This better reflects the purpose of these semantics nodes, and prepares
for adding TupleValue and TupleInit nodes to represent forming values
and initializers from literals.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Jon Ross-Perkins
Richard Smith
Gıyaseddin Tanrıkulu
josh11b
Jacob Schneider
Geoff Romer