The purpose of the newline is to make it clearer where a given
diagnostic begins and ends, particularly as the first message of a
diagnostic may not be the error.
This is a trivial code change, but ripples edits through test files.
Previously we used the default inst block formatting, which writes out a
parenthesized list of references, which would always be 'unexpected
instref's because nothing else prints the instructions in the decl
block.
In addition, track the decl block for function declarations like we do
for other kinds of declaration. This means that the parameter
declarations for a function are now properly rendered into the formatted
IR. Note that this adds a lot of verbosity to `function_decl`, but it
does accurately reflect the IR, and we'll probably want this information
to be printed once we start supporting more complex generic function
declarations.
This removes almost all the 'unexpected instref's in our formatted
output. There are remaining cases when a declarative scope contains
multiple blocks, where we only track one of those blocks. That happens
when there is control flow within declarative scopes, and for error
recovery when a class or interface or similar is defined more than once.
As requested in #3730.
`GlobalInit` block is now static block within a `SemIR` which will be
used to emit initialization instructions for variables in the `Package`
scope.
inst_block_stack now has additional methods to handle `GlobalInit` block
separately, this block can be popped without being finalized allowing to
accumulate between all instances of variables.
At the end of the `check` phase, if this block is not empty , the
function `__global_init` will be added with this block being inserted
into it.
This block is pushed to `inst_block_scope` at the end `BindName`,
allowing instruction to be emitted into it, then popped at the semicolon
(VariableDecl).
This significantly changes the `SemIR` output, that's why this commit
updates a lot of the test cases.
This provides support for Const, Pointer, Struct, and Tuple types. It
does not cover Class, Function, or Interface which have their own Id and
are tracked slightly differently.
I'm basically just nudging down the path I think is right here. Adding a
small bit more support, but also more tests to capture cases that I
think will need to be verified as working.
With diagnostics like "Value of type `<function>` is not callable.",
that's because it expects a FunctionDecl but is instead finding a
ImportRefUsed. I'll need to work out the necessary support for a
callable function.
Building on #3636 which handles the general import case, add special
casing for namespaces. Namespaces can be combined cross-IR, so it's a
little more complex.
The implementation adds import_id to the Namespace instruction as a
reference to find the original using the normal structure. This is
achieved by moving the name_id to NameScope to free up space.
---
I considered a few alternatives...
I considered adding import_id to NameScope, but:
1. It's more consistent with things such as Function or Class that
provide name_id on the info object rather than the instruction.
2. I thought it more likely that there would be more NameScope cases
that might want a name_id rather than the import_id, since ImportRef
will typically be used.
I considered putting the import source (cross-ref IR id + inst id) on
the NameScope versus a separate ImportRef, which seems like the
strongest argument towards the NameScope approach because it removes an
instruction. That just felt inconsistent though, and the overhead of
instruction-per-imported-namespace should be low (theoretically few
namespaces should be used). Plus I feel a bit odd adding two
generally-unused ids to NameScope.
A specialized Namespace structure could also have been created to store
the import_id, but that would add an indirection to the NameScope.
Remove the type canonicalization mechanism and instead rely on constant
canonicalization to deduplicate types.
Rename the `Canonicalize*Type` functions to reflect that they're no
longer performing canonicalization. Switch code that creates types due
to semantic checking, rather than due to source syntax, to directly
create type constants through evaluation rather than creating an
instruction and evaluating it to produce a separate constant
representation.
The mapping from `const (const T)` that was previously performed by type
canonicalization is now implemented in expression evaluation instead.
The value `<error>` is now treated as a constant value, with a special
property that an instruction involving `<error>` that could possibly be
constant evaluates to `<error>`. This helps avoid producing follow-on
errors when an error occurs as a subexpression of an expression, such as
a type, that is intended to be constant.
Rather than producing multiple constants with the same value, fold all
instances of a given constant to the same constant instruction.
A future PR will use this to replace the current type canonicalization
system.
This is accomplished by tracking an extra bit on the ID we store in the
constant values table, and propagating that from subexpressions to the
enclosing expression. This extra bit is not yet computed correctly for
types; that will be addressed in later PRs.
---------
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Form a side table with constant values for each instruction. Evaluation
is only supported for a few very simple kinds of instruction for now.
This is not observable outside of the SemIR output, because nothing
depends on expressions having a constant value phase yet.
Namespaces are copied, which means also adding their name to the
underlying instruction. It happened not to be done previously; the name
was only in name lookup.
Since the only import supported right now is the default import,
functionality is limited; in the future I'll need to deal with namespace
vs package conflicts.
Tests of namespace imports are under "namespace" -- I figured this would
be best for scaling as more instructions get support.
This also improves some debugging-related output that I was trying to
use while trying to build the support.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Another incremental change to diagnostic formatting. I simply recurse
over all the tokens in the subtree of a parse node and construct a
`DiagnosticLocation` that covers all of the tokens.
I believe it's nicer for the user to be directed at the entire chunk of
source where the error is occurring rather then just pointing at the
bracketing/terminator tokens, but let me know if you all agree.
This creates a namespace for `package` scope.
It looks like names of class_decls in namespaces lead to an unexpected
instref. This is already true, as best as I can tell. I'm not sure if
there's a preferred approach to address that, so I've left a TODO for
now.
This removes the filename from the file-scoped block, and places it
above to make it clear where the full SemIR begins (with multifile,
providing a barrier between).
This is an incremental improvement on our diagnostic messages that
simply underlines an entire token if the token is larger than 1 char
(else it points to the single char with a caret like it used to).
Add a `NameId` that is effectively just a wrapper around a `StringId`,
with
some additional predefined values for names that don't correspond to
strings, such as the name of `self` or the function's return slot.
Bug found by fuzzing. Problem was untyped SemIR nodes had an invalid
type id, which was retrieved by `HandlePrefixOperator` and then passed
to `context.GetUnqualifiedType`, ultimately performing an invalid access
in `semantics_ir_->GetNode`.
We prefer to make a placeholder type for functions and namespaces to
remove the need for checking for the untyped case everywhere. Eventually
functions will have their own types, but this approach will be needed
for namespaces (and perhaps other non-first-class entities like unbound
methods and interface members) long term.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Also add `name_reference_untyped` for references to non-first-class
names without types, which currently covers namespaces and functions.
This improves the fidelity of the SemIR representation, and fixes some
issues where we would use the wrong location for nodes and diagnostics
downstream of a name reference.
We're still missing a representation for dotted name expressions, such
as `Namespace.Function`, and we don't use the `untyped` node as an
operand of any other node yet.
This makes the difference between errors and lower-level diagnostics
visible to users, and aligns the toolchain's behavior with the
expectations in `driver_fuzzer.cpp`.
Building on #3214 and #3215, updates sem_ir yaml to be:
```
- filename: name
sem_ir: [ ... ]
```
Also, changes the textual format from `package { ... }` to `file
<filename> { ... }`. My thought on packages there is:
```
file "foo.carbon" {
package MyPackage
...
}
```
The reason for putting the file first is that it's easier if we put what
we're grouping on first, whereas the package is an "annotation" on the
file.
Continuing along with #3070. Note this is just a file rename, with BUILD
edits; every file previously in semantics/ should show as moved (except
maybe BUILDs, which split).
Jon Ross-Perkins
Richard Smith
Gıyaseddin Tanrıkulu
Jacob Schneider
josh11b
Geoff Romer