We already did this translation in the other direction, but we had no
mapping from `Optional(T)` to anything, so round-tripping a nullable
pointer from C++ through Carbon and back to C++ was previously rejected.
Enum constants in a macro replacement list are recognized only when
prefixed with “::”.
There is a `todo` test to make explicit that this still needs to be
fixed.
When prefixed with a global scope “::”, they are correctly found and
evaluated to a const.
Part of #6303
Don't attempt to defer overload resolution by creating a
`CppOverloadSet`; this was incorrect as we weren't saving the complete
clang::OverloadCandidateSet, resulting in template candidates not being
found. Moreover, saving the overload candidate set would be expensive,
as the representation is surprisingly large, and is unnecessary since
we're about to build a call.
In passing, improve the diagnostics for overload resolution failure to
use Clang's operator overload resolution messages rather than its call
overload resolution messages.
This fixes calls to templated operator overloads, which is the final
piece needed for us to successfully compile an iostream-based "Hello
world" program.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
I was trying to figure out the right way to get specifics to be added to
the work.
Technically, we could keep the pending_specific list; this is taking a
different approach of inserting inside the work stack, which will do
extra work moving entries, although typically that should be expected to
be small. One challenge of `pending_specifics` is that if we would need
to shift them to work after both `Done` (for immediate processing) and
`Retry` (for processing after the current instruction is later revisited
and done). That feels kind of awkward as additional tracking to do.
Also, the common case is probably that there's either 0 or 1 specifics
being added, so an additional vector may be significant overhead. That's
why I leaned more in this direction of just inserting them in the vector
of work.
For now, treat such classes as being final, since we can't correctly
derive from them.
This removes the last category of C++ class that we are entirely unable
to interop with, and is a prerequisite for interop with C++ iostreams
(which have a virtual base class).
This continues work to eliminate pending generics/specifics and get them
to be interleaved with instruction imports. I'm trying to use
`FinishGenericOrDone` here as a way to help ensure that code correctly
handles generics, where the simple alternative would be for each
`TryResolveTypedInst` call `SetGenericData` directly (but which might
make it easier to call the wrong `ResolveResult` function, and we do
need the `GenericId`s to be passed).
Following #6357, map C++ `void` to a prelude class type
`Core.CppCompat.VoidBase`, not to a builtin type. This is mostly just
moving logic around, but does notably change `Cpp.void` from being an
incomplete type to being a complete-but-abstract type.
Also change `NullptrT` to be an adapter for `void*` instead of `()*`, to
follow the approved design.
Implicit conversions to `void` and to `void*` are still absent.
Part of #6280.
Every test that used `addr` before #6283 should be using `ref` after
this PR. In most cases that was done in #6283, but this PR transitions a
few that I missed in that first pass. In addition, #6283 cloned the old
`addr` tests from `foo.carbon` to `foo_addr.carbon` in order to maintain
test coverage during the transition; this PR removes those cloned tests.
Give TupleLiteral and StructLiteral a constant value, if their contents
have constant values. Their constant values are TupleValue and
StructValue respectively. This supports their ability to convert to a
constant type (or facet type).
This way when deduce finds a TupleLiteral as the argument to a
_symbolic_ facet type, it can also find a constant value to use for that
argument. This allows deduction to move onto step two, where it can
substitute into the symbolic parameter from previous deduced arguments,
and then perform the conversion from the TupleValue to the desired facet
type.
Allow `PerformBuiltinConversion()` to convert from a canonical
TupleValue or StructValue to `type` instead of only from literals. Then,
also support conversion from a symbolic binding of type TupleType or
StructType to `type`.
Add a `Core.CppCompat.NullptrT` type that C++'s `nullptr_t` maps into.
Map `nullptr` to an uninitialized constant of that type -- `nullptr`
doesn't actually have any defined bits within it, despite having the
same representation as `void*`.
Uses `clang::Parser::ParseConstantExpression()` to parse the macro
replacement tokens, added as a token stream to the preprocessor. This
extends the support from simple object-like macros with a single
replacement token, to multiple tokens like unary operators, binary
operators, casting, nested macros etc.
The support is still limited to macros that are evaluated to an integer
constant. More types to be added as a follow-up.
Part of #6303
They are not used for impl lookup or verifying anything yet, but now
they appear in the textual semir.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Adds support for object-like macros with a single replacement
numeric-literal kind token. Only macros that evaluate to an integer
constant are supported for now. When detected at name lookup, they are
imported as a constant integer value in Carbon.
Demo:
```c++
// --- macros.h
#define CONFIG_VALUE 2
```
``` c++
// main.carbon
library "Main";
import Cpp library "macros.h";
import Core library "io";
fn Run() {
let a: i32 = Cpp.CONFIG_VALUE;
Core.Print(a);
}
```
```c++
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o \--output=demo_carbon
$ ./demo_carbon
2
```
Part of #6303
This unit test uses "using UEnum = Enum;" and imports that into Carbon.
This is my very first try at contributing something to carbon, I'm
looking forward to your feedback.
The test is very basic.
What other cases should it test ?
What other comments do you have ?
If the value representation of `T` is a copy representation, but it
copies all of the bits of `T`'s object representation, then it's OK to
use that as the value representation of `MaybeUnformed(T)` too.
This fixes the behavior of interop with nullable pointers, which are
represented as an adapter of `MaybeUnformed(T*)`, and need to be passed
to and returned from functions on the Carbon / C++ boundary as `T*`s.
This turns `Cpp` into a keyword, and makes it map to `NameId::Cpp` and
`PackageNameId::Cpp`.
Per discussion with zygoloid, the keyword versus identifier question is
deliberately kept open by #4846. This PR switches to a keyword because
mapping to a specific `PackageNameId` works best with a special `NameId`
not backed by an `IdentifierId`. We could in theory make it work using
`IdentifierId` or a runtime-tracked `PackageNameId` for `Cpp` (e.g.
stored on `SemIR::File`), but this approach is consistent with `Core`
and so seemed like a good starting point.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
If `T` implicitly converts to `U`, then:
* `const T` implicitly converts to `U`,
* `T` implicitly converts to `const U`, and
* `T` implicitly converts to `Optional(U)`.
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
#6289 absentmindedly added fields in more places, and this is undoing
that plus further fixes.
This does some cleanup of types with relation to singletons. For
`TypeType` and `ErrorInst`, they're always complete due to a
`SetComplete` call in `file.cpp`. For `CppVoidType`, it's intended to be
incomplete by construction, and so a `TypeId` should be okay. The intent
though on not generally providing these had been that `GetSingletonType`
needs to be called to get a type to be marked as complete.
In the case of `AutoType`, removing `TypeId`does change a small printing
detail. I think that's old legacy that's just been carried forward.
Otherwise, for both `InstType` and `AutoType`, I've added
`GetSingletonType` calls where they were used in order to ensure
completeness is applied correctly. These calls cause small SemIR
permutations.
This causes `AutoType` to be seen by lowering, so I'm adding a
placeholder for it. Also merging two functions that look like they're
identical in intent -- not sure why they're separate.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This defines `Cpp.void` as a custom type.
`Cpp.void*` is mapped to C++ `void*`.
Not supported yet: Conversions from and to other pointer types.
C++ Interop Demo:
```carbon
// main.carbon
library "Main";
import Core library "io";
import Cpp inline '''
#include <cstdio>
auto GetPointer() -> void* _Nonnull {
static int x = 8;
return &x;
}
auto GetValue(void* _Nonnull ptr) -> int {
return *static_cast<int*>(ptr);
}
''';
fn Run() -> i32 {
let ptr: Cpp.void* = Cpp.GetPointer();
Core.Print(Cpp.GetValue(ptr));
return 0;
}
```
```shell
$ bazel-bin/toolchain/carbon compile main.carbon
$ bazel-bin/toolchain/carbon link main.o --output=demo
$ ./demo
8
```
Part of #6280.
For now, map C++ reference types to const-qualified Carbon pointer types
rather than picking between a (non-const) pointer or a value type. This
fixes misbehavior in lowering for reference members in classes and
reference return types.
Update the special-case handling for references as function parameters
so that it continues to map const reference parameters to Carbon
pass-by-value, and unify the code paths for `self` parameters and other
parameters, which were mostly doing the same thing but had some subtle
differences.
Add references to the list of types that we can pass to and from C++
directly, without needing an additional layer of thunks.
Remove duplication between determining whether a parameter needs custom
thunk mapping and whether a function needs a thunk. Now a function needs
a thunk if any parameter or the return type does.
This fixes some inconsistencies; previously:
- We would not require a thunk when passing an `unsigned int`, but if we
had a thunk we'd pass `unsigned int` indirectly.
- We would always require a thunk for an enum parameter, even though
we'd actually pass it directly if its underlying type is a 32- or
64-bit integer.
- We would require a thunk for a nullable pointer, even though
we arrange for all pointer types to have the same ABI in Carbon and
C++, including nullable pointers / Optional(T*).
This also causes us to use a thunk for rvalue reference return types,
which we used to miscompile.
Depends on #6276.
Don't go through the `PerformCall` machinery a second recursive time --
this is redundant, creates additional unnecessary temporaries, and is in
theory wrong because `PerformCall` takes a syntactic argument list (one
argument per callee parameter pattern), but we have a call argument list
(one argument per callee parameter).
---------
Co-authored-by: David Blaikie <dblaikie@gmail.com>
This resolves a TODO in `expr_info.cpp` by using the inst kind rather
than the bound value to track the binding's category.
Since we're churning all the `bind_name` insts in testdata anyway, I'm
also taking this opportunity to align the inst naming with the design's
terminology, by calling these insts "bindings" (this aspect of the PR is
dependent on #6231 resolving an ambiguity in that terminology). For
consistency we'll need to rename several other insts as well (see the
TODO on `RefBinding`); I'm deferring that to a separate PR to minimize
the review load, but I think those name changes are in-scope for this
review.
`const` doesn't mean much on the type of a value expression; it's valid
to remove it because we can't perform modifications to a const value
regardless.
We already allowed most of this, but only as part of adapter conversion
rather than in general, and we didn't previously allow it when the
source of the conversion was a reference expression.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
Ivana Ivanovska
Richard Smith
Geoff Romer
Chandler Carruth
Boaz Brickner
Dana Jansens
Alexander Neundorf
