Commit Graph
147 Commits
Author SHA1 Message Date
Dana Jansens da83b65aa2 Concrete impl takes precedence over a facet value (#5305)
If a concrete impl is found via lookup, its associated constants should
be used over the constants found through a facet value.
2025-04-14 18:48:55 +00:00
Dana Jansens afa946aefa Specialization test with final assoc constant can pass now (#5303) 2025-04-14 16:10:17 +00:00
Dana JansensandRichard Smith 0e8d354567 Split the witness table into a separate ImplWitnessTable instruction (#5272)
This allows us to import the table for a given impl only once, while we
can import many ImplWitness instructions with different specifics for a
generic impl.

For example in convert_facet_value_to_narrowed_facet_type.carbon we see
that a single witness table is imported for the BitAnd interface, with
multiple witnesses (for different specifics) imported and sharing the
same table.

The ImplWitnessTable now contains a back-link to the Impl the witness is
for, allowing inst namer to name that interface in the textual semir,
and allowing the interface to be found when debugging from a witness.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-04-11 20:30:04 +00:00
Richard Smith a74ca9071b Remove all remaining uses of TypeIds as instruction operands. (#5280)
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.

One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.

Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
2025-04-10 20:53:42 +00:00
Dana JansensandRichard Smith 76c68153a2 Look for final impl when accessing associated constant in facet (#5269)
While facets may come with a rewrite for an associated constant, they
are symbolic. A final impl has the ability to provide a concrete value
instead, which allows generic code to use the concrete value in place of
the associated constant's (fully qualified) name.

For instance, instead of `I.Type`, the concrete type `()` can be used if
there is an `impl final [T:! type] T as I where .Type = ()` impl.

This does not yet cache the result of the lookups.

Depends on https://github.com/carbon-language/carbon-lang/pull/5255

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-04-10 13:48:49 +00:00
Richard Smith 1a4d6ca255 Store an InstId instead of a TypeId in UnboundElementType. (#5260)
This gives a slightly simpler representation for `UnboundElementType`s
in eval blocks, and in principle allows us to preserve the spelling of a
field's type into the `UnboundElementType` and thereby into a field
reference, although as of right now this doesn't affect our diagnostic
output in any way.

During error recovery for a field with a non-concrete type, preserve the
type in the `UnboundElementType` regardless. It's not really problematic
to have a non-concrete type there, and this makes it easier to track the
instruction used to specify the type.

This is a step towards switching symbolic types to always be abstract
during type checking.
2025-04-08 22:21:44 +00:00
Dana Jansens d07f70cfb3 Add insts for witness table entries that are unset or associated constants (#5255)
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.

Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.

While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.

This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
2025-04-08 19:10:49 +00:00
Geoff RomerandDana Jansens cda97cb292 Include all symbolic parts in structure comparison (#5247)
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-04-08 19:02:55 +00:00
Richard Smith 0631e18184 Provide an InstId when evaluating a constant in cases where one is needed (#5202)
For each kind of instruction, specify whether its constant evaluation
needs an `InstId` or not. If it does, ensure that all constant
evaluation of that instruction provides one. Otherwise, allow calling
into the evaluator without providing an `InstId`.

This allows us to reliably use the `InstId` in evaluation steps that
either need a location or need to look at the original operands of the
instruction prior to evaluation, and also to support `TryEvalInst` calls
safely for instructions whose evaluation does not need an `InstId`.
2025-04-08 00:40:21 +00:00
4af0c8f8d1 Implement ...where .Self impls... (#5238)
* Also remove facet type deduction, since we decided against it on
[2025-04-02](https://docs.google.com/document/d/1Iut5f2TQBrtBNIduF4vJYOKfw7MbS8xH_J01_Q4e6Rk/edit?pli=1&resourcekey=0-mc_vh5UzrzXfU4kO-3tOjA&tab=t.0#heading=h.95phmuvxog9n).

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-04-07 20:45:45 +00:00
Richard Smith a45dc42d82 Store an InterfaceId and a SpecificId in AssociatedEntityType. (#5252)
Instead of storing a `TypeId` that always refer to a facet type that
always contains exactly a single interface, store the interface
directly.

Also improve stringification of `LookupImplWitness` and witness access
into it, switching to using newly-added functionality for stringifying
specific interfaces.
2025-04-05 16:08:09 +00:00
bc439ad092 Forward impl declarations of incomplete facet types (#5219)
Implements some of the changes from proposal #5168.

* The data structure for complete facet types has been repurposed for
identified facet types. Identified facet types are now a concept in the
toolchain, but without named constraint support they are not
substantially different from incomplete facet types.
* Identified facet types keep the list of required specific interfaces
in sorted order, for efficiency improvements in impl lookup. Found
another way to identify the interface to impl (or number of impls if not
1).
* Forward `impl` declarations of identified but incomplete facet types
are allowed unless the facet type has rewrites. An incomplete facet type
with rewrites is already either an error or has more than one interface
and so can't be implemented, so this case can't be exercised very well
yet.
* Forward `impl` declarations of interface without rewrites use a
placeholder inst block for the witness.
* Changed some machinery to use RequireIdentifiedFacetType to access the
interfaces of the facet type so we only need to add support for
expanding named constraints into interfaces in one place.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-04-02 01:46:27 +00:00
Richard Smith 265968b396 Make evaluation of symbolic bindings simpler and more uniform (#5215)
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.

This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.

The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:

- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
2025-04-01 20:24:00 +00:00
josh11bandJosh L df958940c3 Builtin facet type conversion is final (#5220)
Don't look for a user-defined conversion (implementation of `As` or
`ImplicitAs`) if the builtin conversion to a facet type fails impl
lookup. This is the behavior we want, and reduces noise in diagnostics.

Partial implementation of #5122. Still to do:
* Give an error if the users tries to implement such a conversion, since
it is now unreachable.
* Add notes to the diagnostic explaining why impl lookup failed.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-31 16:11:07 +00:00
josh11bandJosh L 384be1dbe3 Change conversion diagnostic from saying "value" to "expression" (#5221)
Avoids TODO to make the message change based on the expression category.

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-31 15:45:58 +00:00
Dana Jansens 496eddfaf4 Handle FacetAccessType as the self type in symbolic impl lookups (#5200)
It is possible to construct a symbolic impl lookup query that, when
evaluated against a specific, will have a self type that is:
- A facet value instruction with a symbolic constant value
- That constant value is rewritten to a FacetValue pointing through a
FacetAccessType to a symbolic facet value.

Impl lookup looks through the FacetValue to the type inside since
FacetValue will reduce the number of interfaces available to match the
minimum deduced requirements.

Impl lookup also unwraps FacetAccessType in the self type of the query
and the impl, so that queries on FacetAccessType and on facet values can
both compare against the impl's self type with a simple constant value
equality check.

We were unwrapping FacetAccessType on the way into impl lookup, and then
assumed that meant it would never be a FacetAccessType in the symbolic
impl lookup instruction. However, as we can see, the query self
instruction can be symbolic and its value can be rewritten. And in that
case it can contain or become a FacetAccessType.

So we need to also unwrap the FacetAccessType when doing a symbolic impl
lookup.

Closes #5187
2025-03-28 16:02:41 +00:00
Dana Jansens 3469922275 Rename ImplSymblicWitness to LookupImplWitness (#5201)
The instruction does act somewhat like a witness, saying that an impl
does exist for a lookup, but the instruction more concretely represents
an impl lookup - since that is done when it is evaluated.
2025-03-27 21:46:08 +00:00
Dana Jansens 10eae855bc Test cleanup: remove old todo and duplicate test (#5198)
The todo_fail_specialization_written_after_use_is_poisoned.carbon has a
similar test in impl/lookup/min_prelude/specialization_poison.carbon
now.
2025-03-27 16:30:14 +00:00
Dana Jansens f9aa2b79b8 Diagnose the unused generic params on an impl decl (#5189)
These parameters are never deduced, so they prevent the impl decl from
ever being used. But we also don't emit diagnostics inside impl lookup,
so there's nothing provided to the user explaining that they made an
impl that is useless.
2025-03-27 15:25:21 +00:00
Dana Jansens e65866d8c3 Add tests for poisoning specializations and final associated constants (#5191)
- A concrete query should poison any further specializations of an impl
that are found in the same file.
- A symbolic query should poison any final specializations of an impl
that are found in the same file.
- A final generic specialization should allow generic code to use the
concrete type in an associated constant.

The last one was discussed in open discussion:
https://docs.google.com/document/d/1Iut5f2TQBrtBNIduF4vJYOKfw7MbS8xH_J01_Q4e6Rk/edit?resourcekey=0-mc_vh5UzrzXfU4kO-3tOjA&tab=t.0#heading=h.g7v3y38ydkc7

We decided to take this approach for now, as it reduces possible states
that we have to deal with in the toolchain. And we can revisit if it's
causing problems for ordering impls in carbon code.
2025-03-26 22:12:15 +00:00
Dana JansensandJon Ross-Perkins 53c98a8619 Support specialization in impl lookup with a symbolic query/impl. (#5169)
Add a new instruction called ImplSymbolicWitness which represents a
search for an impl declaration given a self type and an interface to
find implemented for the self type. The self type is stored as a
constant instruction id, rather than as a ConstantId, as instructions
don't currently support holding ConstantId. The interface is stored as a
SpecificInterface but we can't fit all of it directly into the
instruction. So we add a new id to refer to the SpecificInterface as
follows.

Add a new SpecificInterfaceId which indexes into a canonical value store
on SemIR::File. This tracks all `SpecificInterface`s stored in an
instruction - specifically the ImplSymbolicWitness instruction.

The SpecificInterface on Impl is still stored there as a value, not as
an id, and no id is eagerly constructed for it. We wait until an id is
needed to make one. Since they are canonical, a new id is only create
when a new SpecificInterface value is seen.

When doing impl lookup, and the query is not concrete, and the impl is
not effectively final, the query needs to consider future impls that may
specialize either the self type or the constaint to make a more precise
match and replace the found impl declaration. Instead of returning the
ImplWitness instruction from the found impl, we generate a
ImplSymbolicWitness instruction, storing the query so that it can be
replayed later. This instruction is added to the generic eval block and
thus will be re-evaluated later with a SpecificId that may make the
query more concrete. When evaluating the instruction and replaying the
query, the lookup has the same conditions and if it does not decide to
use the found impl concretely, then the same instruction is returned
from eval, leaving it as symbolic.

--- Impl lookup changes ---

Impl lookup gets a little more interesting now. It continues to look in
the facet value for a witness if the self type is a facet value. Then
falls back to looking for an impl declaration. This step is no longer
done directly. Instead, we construct a ImplSymbolicWitness instruction
and evaluate it immediately for each interface that are in the query
facet type.

The ImplSymbolicWitness instruction, when evaluated, calls back to the
impl lookup code, with a query specific interface. There we resume back
into the same code path as from before, finding a witness in an impl
declaration. But we may return "found a non-final impl" instead of a
concrete witness. If eval receives this back, it evaluates to the
current ImplSymbolicWitness instruction as the resulting constant value.

To pass lookup failures back through eval, a result of InstId::None from
the second step of impl lookup will result in a non-constant value,
which is used as a signal back up the stack to the original impl lookup
function that the lookup failed. Using a non-constant value here would
break evaluation of the generic eval block if impl lookup could fail
there, however we know it will not since we only leave behind an
ImplSymbolicWitness instruction in the eval block if we found at least
one matching impl already, and we just want to look for a better match
with a more specific query.

We must take care to not store a reference into any value store across
computation in impl lookup, since impl lookup can recurse into itself
invalidate those stores. That includes the SpecificInterface obtained
from a SpecificInterfaceId, which impl lookup also inserts into the
store.

--- The long tail ---

Adding a new instruction and a new id type requires a myriad of changes
to support them:

We add Dump() support for SpecificInterfaceId. And fix a crash in Dump
for SpecificId::None. We also add MakeSpecificInterfaceId() for dumping
arbitrary ids.

The type of ImplSymbolicWitness is a new singleton builtin type
instruction called WitnessSymbolicType (like WitnessType is the type for
an ImplWitness).

Both ImplSymbolicWitness and WitnessSymbolicType are given `Value` as
their expression category as they are builtin constant values. And
BuildInfo() in TypeCompleter is taught about them both, returning a
`ValueRepr::Copy`.

WitnessSymbolicType is added to the set of SingletonInstKinds, so that
it can have a singleton instrution id as a static member.

Lower's BuildTypeForInst() is taught to make an empty struct for
WitnessSymbolicType, similar to WitnessType.

Instruction formatter (FormatterImpl) grows support for printing a
SpecificInterfaceId so that it can print both arguments of
ImplSymbolicWitness on the RHS when printing the SemIR instruction. To
print a SpecificInterfaceId, it prints both the interface id and the
specific id (if there is one). For example, for a query on a generic
interface `Z` with one parameter, the RHS includes the query, interface,
and specific:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```

IdKind is extended to include SpecificInterfaceId.

InstFingerprinter is taught to look through SpecificInterfaceId and use
the interface and specific ids in the fingerprint.

InstNamer is taught about SpecificInterfaceId, counting the interfaces
when building an index. It is also tought about ImplSymbolicWitness,
using the name of the interface within and the `.impl_symbolic_witness`
suffix. For example, here the LHS is named after the interface in the
query:
```
%Z.impl_symbolic_witness: <symbolic witness> = impl_symbolic_witness %U, @Z, @Z(%U.as_type) [symbolic]
```

StringifyTypeExpr is taught about WitnessSymbolicType, which uses its IR
name since it's a singleton. And about ImplSymbolicWitness which uses
its constant value. The handling of ImplWitnessAccess also needed to be
adjusted, since it assumed that ImplWitnessAccess::witness_id would
always be a FacetAccessWitness, but it can now also be an
ImplSymbolicWitness. (It seems that the witness_id is also assigned
ImplWitness instructions, but those ImplWitnessAccess instructions don't
ever seem to get stringified in a diagnostic at this time.) At the
moment the ImplWitnessAccess with a symbolic witness is just stringified
as "<symbolic>", such as in:
```
x.carbon:1:2: error: cannot implicitly convert value of type `()` to `<symbolic>` [ConversionFailure]
  let a: C(D).(Z.X) = ();
                      ^~
```

There is a TODO left behind to include more information there.

The TypeStructure builder is made to handle WitnessSymbolicType and
WitnessType. These come up now in deduce where a generic impl will have
a ImplSymbolicWitness in a FacetValue for a generic self type. The query
may have a concrete ImplWitness in the same position. Since deduce tries
to deduce through the FacetValue, it tries to convert ImplWitness to
ImplSymbolicWitness, tries to do an impl lookup for `impl ImplWitness as
ImplicitAs(ImplSymbolicWitness)` and causes us to build type structures
with each of these.

Subst is updated to handle pushing and popping SpecificInterfaceId.
Without this, when finishing a generic's eval block, we would walk into
the ImplSymbolicWitness instruction, and its arguments, and fail to
recurse down into the SpecificInterfaceId. Then any specifics inside
would be left as "orphaned" without any generic id attached to them, and
we would never update the instructions in the SpecificInterface's
instructions (inside its own SpecificId) with new constant values when
evaluating the generic eval block against a specific. To do this we push
the specific_id inside the SpecificInterface, and when popping we pop
the specific_id then construct a new canonical SpecificInterface with it
and return that id.

We add support for importing ImplSymbolicWitness by importing its self
constant instruction and specific interface id. However we also had to
add import support for SpecificImplFunction, which can now appear in the
generic eval block for a generic impl declaration, and thus must be
imported with the declaration. This is done very similarly to
SpecificFunction, except the `type_id` is a singleton value.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-03-26 15:10:23 +00:00
Richard Smith e25f58adec Rebuild the type of a bind_symbolic_name when building an eval block (#5174)
When transforming instructions with symbolic constant values into the
eval block, we previously special-cased `bind_symbolic_name` (and
`symbolic_binding_pattern`) because they are places where symbolicness
is introduced, rather than propagated from operands, and just copied
them into the eval block. However, `bind_symbolic_name` can be dependent
on other symbolic constants, because it can have a type that is
dependent. In this case, the copy in the eval block would not have its
type properly adjusted to refer to the type within the eval block.

Fix this by performing substitution into `bind_symbolic_name` rather
than copying it directly, and instead, detect cases where substitution
determined that the instruction was unchanged despite having a symbolic
constant value, and force it to be rebuilt in that case.

I've not found any way that the previous behavior actually caused
problems, or affected the observable behavior of the toolchain. The type
of these instructions in the eval block doesn't make much difference to
anything because they get immediately replaced by their corresponding
argument values when we run the eval block. But this came up and caused
some test output churn when I was making a different change, and it
seems like a fix to our representation even if it's not changing
behavior, so I'm splitting it out so it can be handled separately.
2025-03-25 22:53:25 +00:00
josh11bandJosh L a7d9ac576c Narrowing facet type conversion tests (#5172)
Merges in the "subtyping" tests from the `impl/lookup` directory along
with some new tests into
`convert_facet_value_to_narrowed_facet_type.carbon` in the `facet`
directory.

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-25 00:11:00 +00:00
Dana Jansensandjosh11b 402dc2c064 Add some test cases of specialization (#5165)
- A test that should fail that looks to see we poison impls when we do a
concrete lookup, so you can't define an impl specialization after we
looked for it. This currently passes but should fail.
- A test with a final specialization with a type constant written before
a generic function using it. The generic function should be able to know
the concrete type of the constant. This currently fails, and was
discussed in open discussion here:
https://docs.google.com/document/d/1Iut5f2TQBrtBNIduF4vJYOKfw7MbS8xH_J01_Q4e6Rk/edit?resourcekey=0-mc_vh5UzrzXfU4kO-3tOjA&tab=t.0#heading=h.swr8311y952x
- A test with a specialization written after a generic function, which
will be used symbolically so the type constant will not be known. This
fails and should continue to, though the error diagnostic may change in
time.
- A test with a specialization written after a generic function, and
which returns a value typed as the type constant from that
specialization. The generic is called with types that should cause it to
use that specialization in the specific, so the caller gets back the
type expected. This currently fails but should pass.

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2025-03-21 20:38:24 +00:00
Dana JansensandRichard Smith 11ae0e27ab Deduce through FacetValue (#5158)
When the parameter is a deduced symbolic FacetValue, refering to a
BindSymbolicName, and the argument is a concrete FacetValue that would
match the FacetType requirements on the BindSymbolicName's type, we
currently do not deduce that the argument matches the parameter.

The argument is not _converted_ to the parameter type because they are
both FacetValues of the same FacetType type. However they are also not
equal constant values so the argument is not saved as a deduced match
for the parameter.

In order to accept the FacetValue, we need to consider them as
`deduce_through`, which attempts to deduce each of the fields in the
argument FacetValue against the fields in the parameter FacetValue.
This deduces that the argument's concrete type matches the symbolic
BindSymbolicName and its witnesses are the same.

Since the parameter is a FacetValue, its argument is not the type that
needs to be recorded as the deduced type for the binding. The
BindSymbolicName inside the parameter is the place that we need to find
the deduced type for the binding. So simply walking into the FacetValue
gets us to that position, where we eventually record the deduced
argument type as being the concrete type from the original argument
FacetValue.

Similarly, when determining what interfaces are satisfied by a
FacetValue for deduce, we want to use the full type available in the
FacetValue rather than just those from its FacetType. Determining
availability of interfaces here is equivalent to converting, and we want
converting a FacetValue to always work on the full available type info.
Only API access (member lookup) is restricted by a FacetValue to the
interfaces provided by its FacetType type.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-03-20 23:52:50 +00:00
josh11bandJosh L a62a8cfd84 Add test with example from 2025-03-19 discussion (#5157)
This example motivated a decision to add a feature where we do impl
lookup to see if there is a matching `final` impl even in some cases
where it is already established that the type implements the interface.
I don't know when we plan on implementing this, but I wanted to capture
the example as test so we would have a TODO to address it.

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-20 17:17:27 +00:00
Richard Smith 584426dfa2 Initial work on support for templates (#5081)
This broadly follows the design described in [this design
document](https://docs.google.com/document/d/1eWW8MTko3PIqxZ32-GhsdaRSYqoDicxMB1VeessMTOg/edit?pli=1&tab=t.0).

Support is provided for only two primitives for now -- simple member
access and type conversion -- to demonstrate the basics of the
functionality.
2025-03-19 20:19:21 +00:00
Dana Jansens 417b3833e2 Produce helpful diagnostics when converting to a facet fails (#5109)
When converting to a facet there are three different failure modes:

1. You provided a non-type value. Only types can convert to facets. So
we tell you that we found a non-type value.
2. You provided a facet type (which has type TypeType) which does not
have witnesses for the the target facet's type. So we tell you that the
type `T` implements `X` but needs to implement `Y`.
2. You provided a (non-facet-type) concrete type (of type TypeType)
which does not implement the target facet's type (which is a FacetType).
So we tell you that we need the type to implement the FacetType but it
does not.
3. You provided a FacetAccessType (which is of type TypeType also, but
we special case this), whose underlying FacetType is not compatible with
the target facet's type. So we tell you that we need the type to
implement `X` but found a FacetAccessType `T` which implements `Y`.

Closes #5027
2025-03-14 15:50:03 +00:00
josh11bandJosh L ebaf62efb9 Associated constants can be used in member function signatures (#5089)
This required allowing incomplete facet types where previously
completeness was required. Once we support named constraints, we will
need a way to consistently go from an interface to a facet type witness
index without requiring the interface to be complete in these cases.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-12 00:33:46 +00:00
Dana Jansens bdf5d17b06 Move impl cycle tests to min-prelude (#5108)
Use the facet_types min-prelude instead of defining a Core package in
the test file.
2025-03-11 19:38:12 +00:00
Dana Jansensandjosh11b 4539114c21 Return a set of ImplWitnesses from impl lookup (#5075)
A query facet type may contain multiple required interfaces, in which
case impl lookup should return an ImplWitness for an impl that is used
for each interface in the query. We bundle these together into an
instruction block and return that from impl lookup. The witnesses are in
the same order as the interfaces in the
`CompleteFacetType::required_interfaces`. This allows walking the
`required_interfaces` to find an interface to give an index that can
also be used to grab a witness from this set, or from FacetValue.

FacetValue now has an InstBlockId for the set of witnesses of the
FacetType, instead of a single ImplWitness instruction id.

FacetAccessWitness includes the index of the witness (determined from
the position in `required_interfaces`) of the witness it's accessing
from the FacetType.

The
toolchain/check/testdata/facet/no_prelude/fail_todo_call_combined_impl_witness.carbon
test demonstrates the fix in the resulting SemIR. We can see the calls
to methods on a multi-interface FacetType result in a FacetAccessWitness
with an index of the correct interface, and this results in a witness
that leads to the correct impl's function.

There is a TODO in member access, where it does not have a
`CompleteFacetType` yet, so it uses the index in
`FacetTypeInfo::impls_constraints` instead, but this can be incorrect in
the presence of named constraints, which when completed can add more
interfaces to the `CompleteFacetType` and which are sorted into an
arbitrary order with the rest there.

---------

Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
2025-03-10 16:00:35 +00:00
Alina Sbirlea 7fd54eded0 Reverse nesting of BoundMethod and SpecificFunction. (#5079)
During SemIR, when identifying a specific in a specific context, we'd
have to either look through a specific or through a bound method.
Canonicalize which one to look through first, by having the BoundMethod
created around a SpecificFunction instead.
This changes a lot of check tests.

TODO: As the SemIr does not currently allow removal (access to insts()
is intentionally const), the bound instruction created prior to finding
the specific is not removed from the instructions.
Options: (1) leave as is, (2) add a way to remove the previous bound,
(3) rethink how/when the BoundMethod inst is created.
2025-03-08 01:34:06 +00:00
josh11bandJosh L aa90ab3862 Fix non-instance compound member access (#5059)
Implements the rule:

> For compound member access `a.(b)` where `b` names a _non-instance_
member of an interface `I`:
> * `a` is implicitly converted to `I`
> * let `T` be the result of symbolically evaluating the converted
expression
> * `impl` lookup is performed for `T as I`.
>
> Instance binding is never performed.

See
https://docs.carbon-lang.dev/docs/design/expressions/member_access.html#impl-lookup-for-compound-member-access.
Before this PR, non-instance members were treated as instance members.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-07 01:37:07 +00:00
ea1a0c8b84 Find impl witnesses in facets (#5060)
Impl lookup for an interface `I` for a facet with facet type requiring
an interface `I` will now succeed, getting the witness from the facet.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-03-06 17:58:53 +00:00
Geoff Romer f08e046d9e Update text representation of CallParamIndex to match new name (#5067) 2025-03-04 23:28:42 +00:00
Geoff Romer d264f14027 Clean up handling of Call params (#5061)
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.

As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
2025-03-04 21:01:59 +00:00
josh11bandJosh L c2281d1250 Update tests for upcoming #5059 and #5060 on member access and finding impl witnesses in facets (#5054)
Here are some test changes so the diffs that come from my upcoming
functionality changes are easier to see. Upcoming functionality
includes:
* Compound member access with non-instance associated constants will
change to comply with the design
https://docs.carbon-lang.dev/docs/design/expressions/member_access.html#impl-lookup-for-compound-member-access
in #5059 .
* Impl lookup will add support for finding impl witnesses in facets
#5060

I'm also making the toolchain/check/testdata/impl/compound.carbon test
into a no_prelude version, and adding a version that tests with
importing.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2025-03-04 17:59:30 +00:00
Dana Jansens 0beda27192 Fingerprint impl blocks in semir (#5021)
This avoids the suffix changing when adding new impls to the prelude, or
in user code.
2025-02-26 22:47:57 +00:00
3ebd098597 Completing a type no longer ignores facet types (#5004)
Make facet types complete like other types. This means that in the body
of an interface, the type of `Self` is incomplete. This involved fixing
an issue where eval of a specific_id that was already canonical was not
resolving the specific declaration, which could occur as part of
substituting into a facet type.

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-02-22 21:40:43 +00:00
eb69d7420e First iteration of completing and resolving facet types (#4920)
* Add `RequireCompleteFacetType` and `ResolveFacetTypeImplWitness` to
`check::Context`. Goal was to move code from `impl.cpp` (mostly) without
functional changes.
* Complete type information is cached with the facet type, and is stored
in a `complete_facet_types()` table.
* Main functional change is to diagnose attempts to use a rewrite
constraint on an associated function. Some existing diagnostics have
been updated.
* Remove `check::Context::RequireDefinedType`:
  * For class types, use `RequireCompleteType`
  * For facet types, use `RequireCompleteFacetType`
* Introduce a `SemIR::SpecificInterface` to hold an interface and
specific id pair.
* Keep the specific interface ids in the impl object.
* Avoid some extra copies in `Dump` functions.
* Future work missing from this PR:
  * Resolving for member access or actions that require impl lookup.
  * Resolving rewrites constraints that refer to non-concrete values.
* Any support for adding implied constraints that result from a `where`
clause (though TODOs have been added).

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-02-19 22:10:11 +00:00
Boaz Brickner 986a2a064c Add poisoned names to the format (#4961)
Part of #4622.
2025-02-14 19:18:51 +00:00
Richard Smith c6d35e1c4a Rename template constant -> concrete constant. (#4939)
This implements a direction decided in a
[recent
discussion](https://docs.google.com/document/d/1Iut5f2TQBrtBNIduF4vJYOKfw7MbS8xH_J01_Q4e6Rk/edit?resourcekey=0-mc_vh5UzrzXfU4kO-3tOjA&tab=t.0#heading=h.mas1g68xx9ct)
to switch away from "template constant" when naming a constant that
doesn't depend on any generic parameters, because that creates confusion
with template-dependent constant values that depend on a template
parameter.
2025-02-12 21:24:51 +00:00
Richard SmithandJon Ross-Perkins fcfb1345d5 Support accessing associated functions by member access into facets (#4872)
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.

This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.

In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-02-04 22:38:38 +00:00
Richard Smith 5f888e1124 Treat associated constants as entities parameterized by Self (#4837)
Add a full entity representation for associated constants, and build a
`Generic` object for them. This `Generic` is parameterized by the
enclosing `Self` type, allowing the use of `Self` within the type of the
associated constant to be supported.

When performing impl lookup for an associated constant, produce the type
with the provided self type substituted for its `Self` along with any
generic parameters of the interface.

Split the handling of associated constant declarations into two parts,
corresponding to the code before the `=`, and the code between the `=`
and `;` (if any). The former goes into the generic declaration region;
the latter into the generic definition region. This prepares us to
handle the default value for an associated constant, but for now we're
just storing the information and not actually using it.

Remove the entity type field from `assoc_entity_type`, because it's
almost unused and is an attractive nuisance -- it must necessarily be a
type in the generic scope of the associated constant rather than in the
scope of the instruction (because there is no `Self` anywhere else),
which means that it's hard to substitute into or derive meaning from.

See `toolchain/check/testdata/impl/assoc_const_self.carbon` for tests of
the new functionality; these used to cause the toolchain to crash.
2025-01-25 02:13:52 +00:00
Jon Ross-Perkins 6b5eb1a101 Id::Invalid -> Id::None (#4834)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.

Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).

I've tried to sequence commits here:

1. Automatic replacements:

- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
  - `<invalid>` -> `<none>`
  - `InvalidNodeId` -> `NoneNodeId`
  - `/\*invalid\*/` -> `/*none*/`
  - `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`

2. Manual edits:

  - In `int.h` and `int_test.cpp`
    - `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
    - Manual edits to comments in this file.
  - `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
  - In `ids.h` and `ids.cpp`
    - `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
    - Various math on `InvalidIndex` -> `NoneIndex`
    - Various mentions of "valid" in comments
  - In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
  - Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.

3. Autoupdate tests

4. verbose.carbon (NOAUTOUPDATE)

5. Comment spot checks

Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
2025-01-22 23:15:00 +00:00
Calvin 3f4de65ad8 Improve SemIR naming of import_refs (#4824)
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.

<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: &lt;witness&gt;</code></td>
<td><code>%Main.import_ref.8f2: &lt;witness&gt;</code></td>
</tr>
</table>

* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes #4769
2025-01-22 07:22:07 +00:00
David Blaikie 667a010ae6 Readd the missing class !members list. (#4828)
Thanks to danakj for spotting this was removed accidentally in #4732
2025-01-21 20:37:07 +00:00
Geoff RomerandRichard Smith 13434f0e8a Model var as a pattern operator (#4720)
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-01-17 17:51:34 +00:00
David BlaikieandJon Ross-Perkins e6c1f0630a Add a newline after diagnostic output when testing (#4818)
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).

A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-01-16 23:23:57 +00:00
a8b46cf561 Add SemIR Vtable instruction and usage (#4732)
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).

This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.

Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-01-16 20:19:22 +00:00