Commit Graph
69 Commits
Author SHA1 Message Date
Richard Smith a74ca9071b Remove all remaining uses of TypeIds as instruction operands. (#5280)
In preparation for shifting from `TypeId`s potentially representing
attached types to always representing unattached types, using
[terminology suggested on
Discord](https://discord.com/channels/655572317891461132/963846118964350976/1359286326779973712).
This change causes us to track slightly more type spelling information
through SemIR.

One change that has significant impact on the SemIR output is that we
now build a `struct_type` instruction in each class representing the
types of the fields, including the spelling used for those types. This
is now no longer always identical to the corresponding canonical
`struct_type` for the object representation, so it's built separately
and owned by the class.

Also remove `TypeBlock` support entirely, as its only use was
representing `TupleType`s, which now use an `InstBlock`.
2025-04-10 20:53:42 +00:00
Dana Jansens d07f70cfb3 Add insts for witness table entries that are unset or associated constants (#5255)
Instead of using None, use an explicit ImplWitnessTablePlaceholder in
the witness table for entries that have not yet been populated, to aid
debugging. This would ensure they would show up very clearly in the
SemIR. This uncovered some `<invalid>` in the SemIR under erroneous
conditions that have now been turned into `<error>`.

Add the ImplWitnessAssociatedConstant instruction which wraps the
canonical instruction found from the constant value of the rewrite
constraint. This ensures that we have an instruction inside the eval
block for a generic impl declaration for each rewrite constraint's
value, which allows Subst to be performed to rewrite the symbolic
constant of the ImplWitnessAssociatedConstant instruction to associate
it with the generic. This will prevent the otherwise orphaned symbolic
constant of the rewrite's value from being used which can not have a
specific applied to them.

While applying the new insts in InitialFacetTypeImplWitness(), rearrange
the function to use less nesting. And avoid using entity names from
imported instructions (as we found is not effective in deduce.cpp) and
use a local instruction by going through the constant value.

This PR is part of the effort to allow a rewrite to name a generic
parameter, such as `impl forall [T:! type] T as Z where .X = T`, however
tests for this involve a final impl so that we can typecheck that the .X
value is a specific T, so the tests will come with that work. This piece
is split off because introducing new instructions causes a lot of SemIR
churn, and I wanted to get that done separately.
2025-04-08 19:10:49 +00:00
Richard SmithandDana Jansens bba32900c3 Preserve type sugar in ArrayType, ConstType, and PointerType. (#5235)
Each of these types takes another type as an operand. Instead of storing
that other type as a `TypeId`, store it as an `InstId` so that we can
track how it was written, not only its canonical form.

The canonical constant values of these types continue to store the
canonical constant values of their operands, as normal.

---------

Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-04-03 21:14:03 +00:00
Richard Smith 265968b396 Make evaluation of symbolic bindings simpler and more uniform (#5215)
Factor out logic to evaluate `EntityNameId` instead of duplicating it
between `BindSymbolicName` and `SymbolicBindingPattern`. Remove support
in `SymbolicBindingPattern` for evaluating a pattern to the constant
value of the corresponding binding, which doesn't really make any sense
given that patterns don't generally evaluate to the value that they
matched.

This results in the handling for `SymbolicBindingPattern` being simply
the default handling for an always-constant instruction, so remove the
special case for it entirely and change its constant kind to `Always`.
It's not entirely clear that it makes sense for `SymbolicBindingPattern`
to be treated as a constant when other patterns aren't, but we seem to
be relying on this in various places, so leave it as a constant for now.
Changing it to never be constant will be a smaller change now -- it just
requires changing the `constant_kind`.

The IR changes in the tests are fairly widespread, but mechanical, and
there are two kinds of things changing:

- `symbolic_binding_pattern`s in specifics now evaluate to
`symbolic_binding_pattern`s, not to the argument values. This means in a
few cases we end up with additional `symbolic_binding_pattern`
constants.
- We evaluate the type operand of `symbolic_binding_pattern` now, so an
error in the type will now properly be propagated into an error in the
pattern's constant value.
2025-04-01 20:24:00 +00:00
Richard Smith 584426dfa2 Initial work on support for templates (#5081)
This broadly follows the design described in [this design
document](https://docs.google.com/document/d/1eWW8MTko3PIqxZ32-GhsdaRSYqoDicxMB1VeessMTOg/edit?pli=1&tab=t.0).

Support is provided for only two primitives for now -- simple member
access and type conversion -- to demonstrate the basics of the
functionality.
2025-03-19 20:19:21 +00:00
Jon Ross-Perkins dfe1c880ea Clean up node kind information for namespaces (#5120)
This flows out of #5084 and trying to reduce UnsafeMake use. It turns
out imports and namespaces were using unexpected node kinds (previously
ImportIntroducer instead of ImportDecl, for example). This fixes and
adds validation.

I was uncertain about whether to just remove the is_convertible check,
since I don't see it as motivating creation of a conversion between
NodeIdOneOf types. So I've just left a TODO for now.
2025-03-18 00:44:18 +00:00
Jon Ross-Perkins 8738497301 Fix parse support for 'fn F[];' (#5135)
According to approved syntax at
https://github.com/carbon-language/carbon-lang/blob/trunk/proposals/p3848.md#syntax-defined,
`fn F[]` without explicit parameters should be valid. This makes it
work, then adds some validation to prevent `class C[]` in check.

Note that for `fn`, positional parameters are a TODO -- but this allows
me to test validation in `fn destroy[]` which is rejected, not just a
TODO.
2025-03-18 00:31:17 +00:00
Jon Ross-Perkins db21c38550 Use the NameComponent's name_id when making an entity base (#5125)
This changes the SemIR of invalid redeclarations, because previously
they lacked a name. We've avoided this in diagnostics so it doesn't
otherwise come up, but I plan to use it for more easily validating
redeclarations.
2025-03-14 15:27:24 +00:00
Geoff Romer f08e046d9e Update text representation of CallParamIndex to match new name (#5067) 2025-03-04 23:28:42 +00:00
Geoff Romer d264f14027 Clean up handling of Call params (#5061)
- Explicitly document that `*Param` and `*ParamPattern` insts represent
`Call` parameters.
- Stop wrapping compile-time parameter patterns in `ValueParamPattern`
insts (because they aren't `Call` parameters).
- Document how `MatchContext::results_` relates to the `Call`
parameters, and be more consistent about when it's written to.
- Remove `RuntimeParamIndex::Unknown`: we no longer need to distinguish
"this `Param`'s runtime index is unknown" from "this `Param` isn't a
runtime param", because we no longer use `Param`s at all in the latter
case.
- Rename `RuntimeParamIndex` to `CallParamIndex`.

As a side effect of removing the `ValueParamPattern` insts, this fixes a
minor diagnostic bug where `NoteInitializingParam` didn't identify the
specific parameter that led to a deduction failure, because it expects
generic parameters to only be represented by `SymbolicBindingPattern`s,
but before this change they could be wrapped in `ValueParamPattern`s.
2025-03-04 21:01:59 +00:00
Richard Smith 0d2f364f39 Split evaluation up into one function per instruction kind (#5008)
Replace the large and growing `TryEvalInstInContext` function with one
function per kind. While we still have special-case handling for a small
number of instruction kinds, most instructions are now handled either
fully automatically or use a common codepath that evaluates the
instruction operands and then performs an eval-context-independent
evaluation of the instruction.

To support this, `InstConstantKind` is expanded to describe more
fine-grained details about how each kind of instruction interacts with
constant evaluation. Also, the operand kinds of instructions become
slightly more fine-grained: we now distinguish between operands that
describe the destination of an initializing expression (`DestInstId`)
from other `InstId` operands, because `DestInstId` operands need
different treatment during constant evaluation. In particular, an
initializing expression can have a constant value even if its
destination is non-constant or has not yet been set, because evaluation
of an initializing expression doesn't include the store to the
destination.

Some minor test changes:

- We now more consistently propagate errors into the results of constant
evaluation, so more instructions that depend on errors have a constant
value of `<error>`.
- Diagnostic location for invalid array types now point at the whole
array type rather than the array index expression, because
`EvalConstantinst` doesn't have access to the original expression.
- Diagnostic for failed `RequireCompleteType` doesn't print the original
type any more because `EvalConstantInst` doesn't have access to the
original expression.

As a follow-up, some of this -- in particular, the `EvalConstantInst`
overloads -- will be moved to a separate file, in an effort to split the
overall constant evaluation machinery apart from the logic to evaluate
each individual kind of instruction.
2025-02-27 01:31:26 +00:00
Alina Sbirleaandjonmeow 1d48270dc4 Emit diagnostics missing declaration of owned function. (#4962)
Emit diagnostics for a function declared in a non-owning library, that
is not redeclared (or defined) in the owning library.

---------

Co-authored-by: jonmeow <jperkins@google.com>
2025-02-22 01:29:22 +00:00
Boaz Brickner 6a99c4e970 When diagnosing a duplicated name, add the name to the diagnosis (#4902)
In order to have the name available for diagnostics, we now always set
`NameId` in `NameContext` and put `poisoning_loc_id` as part of the
union with `resolved_inst_id` instead (since we never need both).
2025-02-19 07:19:23 +00:00
Boaz Brickner dd7c64bad0 When diagnosing a duplicate name, point to the name instead of the instruction (#4953)
Left TODOs where more work is necessary before this change can be
applied or its impact can be verified.

Includes #4952, to avoid regression in some cases.

Similar to #4938. See
https://discord.com/channels/655572317891461132/655578254970716160/1339007384361762857.
2025-02-14 19:21:50 +00:00
Richard Smith c6d35e1c4a Rename template constant -> concrete constant. (#4939)
This implements a direction decided in a
[recent
discussion](https://docs.google.com/document/d/1Iut5f2TQBrtBNIduF4vJYOKfw7MbS8xH_J01_Q4e6Rk/edit?resourcekey=0-mc_vh5UzrzXfU4kO-3tOjA&tab=t.0#heading=h.mas1g68xx9ct)
to switch away from "template constant" when naming a constant that
doesn't depend on any generic parameters, because that creates confusion
with template-dependent constant values that depend on a template
parameter.
2025-02-12 21:24:51 +00:00
Jon Ross-Perkins 6b5eb1a101 Id::Invalid -> Id::None (#4834)
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.

Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).

I've tried to sequence commits here:

1. Automatic replacements:

- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
  - `<invalid>` -> `<none>`
  - `InvalidNodeId` -> `NoneNodeId`
  - `/\*invalid\*/` -> `/*none*/`
  - `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`

2. Manual edits:

  - In `int.h` and `int_test.cpp`
    - `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
    - Manual edits to comments in this file.
  - `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
  - In `ids.h` and `ids.cpp`
    - `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
    - Various math on `InvalidIndex` -> `NoneIndex`
    - Various mentions of "valid" in comments
  - In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
  - Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.

3. Autoupdate tests

4. verbose.carbon (NOAUTOUPDATE)

5. Comment spot checks

Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
2025-01-22 23:15:00 +00:00
Calvin 3f4de65ad8 Improve SemIR naming of import_refs (#4824)
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.

<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: &lt;witness&gt;</code></td>
<td><code>%Main.import_ref.8f2: &lt;witness&gt;</code></td>
</tr>
</table>

* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes #4769
2025-01-22 07:22:07 +00:00
David Blaikie 667a010ae6 Readd the missing class !members list. (#4828)
Thanks to danakj for spotting this was removed accidentally in #4732
2025-01-21 20:37:07 +00:00
Geoff RomerandRichard Smith 13434f0e8a Model var as a pattern operator (#4720)
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2025-01-17 17:51:34 +00:00
David BlaikieandJon Ross-Perkins e6c1f0630a Add a newline after diagnostic output when testing (#4818)
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).

A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-01-16 23:23:57 +00:00
a8b46cf561 Add SemIR Vtable instruction and usage (#4732)
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).

This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.

Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2025-01-16 20:19:22 +00:00
Dana Jansens 6aba386eeb Move the complete_witness_type above the !members label. (#4808)
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
2025-01-15 22:13:19 +00:00
Jon Ross-Perkins d958caaff3 Refactor CheckIsAllowedRedecl and stop function definition merging (#4800)
Rename `CheckIsAllowedRedecl` to `DiagnoseIfInvalidRedecl` to try to
better document behavior, and clean up comments.

This extends the no-merge-if-defined behavior to functions. It was
already the case for class/interface, and just added for impl, so if
anything functions were now inconsistent. I was kind of tempted to make
a helper for it, but I didn't think of a great structure/name to get
there: `DiagnoseRedef` isn't always called when it's a redefinition, for
example due to `extern` diagnostics, it's hard to combine.

Cleans up `is_defined` calls to rely more on `has_definition_started`,
removing some code paths that are unused since definitions aren't
merged.
2025-01-14 21:13:21 +00:00
Richard Smith b1230218d5 Make fingerprinting stable across compatible source changes. (#4789)
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.

Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.

Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.

This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
2025-01-10 22:30:22 +00:00
Richard Smith d42128ef9a Parse all kinds of declarations at function scope. (#4779)
These don't fully work in check and beyond yet, because they're not
added into lexical lookup, but already mostly do the right thing.

Per #3407, disallow namespace declarations anywhere other than at file
scope for now.

We don't treat statements starting with a packaging introducer keyword
(`package`, `library`, `import`) as declarations because they're
sufficiently unlikely to occur that the error recovery doesn't seem
important, and this avoids needing to disambiguate `package.` at the
start of an expression.
2025-01-10 07:03:10 +00:00
Richard SmithandDana Jansens 19182f08aa Compute a fingerprint for constants and import_ref instructions. (#4763)
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.

---------

Co-authored-by: Dana Jansens <danakj@orodu.net>
2025-01-07 20:41:44 +00:00
Dana Jansensandjonmeow 6cb660f5ad Avoid recursion in InstNamer::CollectNamesInBlock (#4706)
Use a deque to maintain the set of instructions to be walked over. so
that the loop can append more instructions (with their related scope)
during iteration without requiring recursion.

---------

Co-authored-by: jonmeow <jperkins@google.com>
2024-12-20 16:12:06 +00:00
Geoff RomerandRichard Smith a112cbde5c Model type expressions as regions (#4698)
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-12-19 21:41:06 +00:00
Jon Ross-Perkins e7a86b03c6 Remove offsets from InstId formatting, trying to name more (#4645)
The offsets were originally added to deal with churn from builtins in
the raw semir. In textual semir, we mostly see instruction IDs for
imports, and builtins have also settled down more.

On imports, where possible, use the `EntityNameId` for an import instead
of printing an instruction. Next, show the source location if we have a
node. Only show the instruction if there's no location.

This also exposes `Parse::Tree` and `TokenizedBuffer`, so that we can
pass a `SemIR::File` without the component parts. In particular this
allows us to get the `TokenizedBuffer` for import IRs without
substantial structural modifications. We may want to make these optional
for serialized `SemIR` later, but the nodes/tokens contain source
location, which we'd need for debug information -- so it's not clear how
much we can really make them optional without substantial information
loss.

Reduce arguments to just `File` in a few spots, as a result of the
accompanying `TokenizedBuffer` and `Parse::Tree`. Also updates style to
pass around `const File*` where the reference is maintained, instead of
`const File&`.

I was considering keeping a direct reference to the tree and tokens on
`Context`, but initially my thought was it wouldn't make much
difference. I can re-add those if desired, just as direct caching of the
`File` fields.
2024-12-06 21:17:24 +00:00
Richard Smith f8e7dad33a Include the file from which an entity was imported in formatted SemIR. (#4621) 2024-12-04 19:12:56 +00:00
Geoff RomerandRichard Smith 78d7a7c291 Remove return_slot_id (#4577)
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-12-04 00:21:24 +00:00
josh11bandJosh L 5d1b39e1f2 More instructions get named (#4615)
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2024-12-03 20:47:53 +00:00
Richard Smith 831dd2c929 Fix importing of the complete_type_witness for a generic class. (#4600)
We need to create an instruction on import to attach the generic
constant value to.
2024-11-28 00:13:21 +00:00
Richard Smith 4a10d29b99 Include the complete type witness for a class in its SemIR output. (#4599)
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
2024-11-27 23:45:20 +00:00
Boaz Brickner bbd8b55be2 Clarify what specific name in the Core package is looked for when diagnosing that the Core package is not found (#4571)
I believe this makes the error easier to understand.
2024-11-22 15:48:18 +00:00
4ee65ef58a Reduce the size of formatted SemIR. (#4534)
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
2024-11-15 21:00:26 +00:00
Jon Ross-Perkins fa95892a37 Add diagnostic coverage, remove possibly-unreachable unary op diagnostic (#4519)
I'm working to make sure remaining diagnostics have coverage, at least
the ones I'd previously added a TODO for. Note in particular that I
couldn't figure out a repro for UnaryOperatorRequiresWhitespace; if you
have one, I can add a test, but otherwise maybe it's actually
unreachable due to being diagnosed through infix logic (or, maybe
this'll let fuzzing tell me an example).
2024-11-13 18:04:25 +00:00
Geoff RomerandRichard Smith 5759ad8b42 Remove forward references from binding patterns (#4494)
This is primarily to free up space in the BindingPattern insts, but as a
side effect it moves the link between BindingPattern and its BindName
out of the SemIR, and into a transient data structure in Context.

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-11-08 20:18:22 +00:00
Jon Ross-Perkins 10e256a241 Name empty tuples distinctly in SemIR. (#4503)
Building on #4502, give empty tuple values a distinct name, and also
explicitly name tuple types (previously values but not types were
named).
2024-11-08 17:14:52 +00:00
Geoff Romer b67d03126e Separate inst kind for out params (#4442) 2024-10-24 15:22:32 +00:00
Richard Smith 2e63da1a40 Move diagnostic kind name to the end of the diagnostic. (#4437)
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.

Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```

After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```

Also tighten up test regex to only match on `STDERR` lines that list a
file name.
2024-10-23 16:56:23 +00:00
Geoff Romer 9266f867f9 Model the return slot as an output parameter (#4432)
Also fix `Param` insts to have meaningful names in pretty-printing, to
help clarify relationship with return slot.
2024-10-23 16:53:34 +00:00
Jon Ross-Perkins 62c36eceda Support printing the diagnostic kind for verification. (#4425)
This is to help identify which diagnostics we're actually using.

Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
2024-10-18 22:33:56 +00:00
Geoff RomerandJon Ross-Perkins 9d942f4633 Generate parameter pattern-match IR from pattern IR (#4388)
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.

Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-10-16 19:15:29 +00:00
Richard Smith efb5d6d25a Assign locations to instructions in a generic eval block. (#4393)
The locations point to the first instruction in the generic that needed
the relevant constant value or type.

For now, this must makes the formatted SemIR a bit more useful, but in
the future it will also provide locations for diagnostics caused by
monomorphization failure.
2024-10-09 19:03:15 +00:00
josh11bandJosh L d6d70bf80d Handle runtime implicit parameters, and self outside of methods (#4361)
Closes #4356, #4359

---------

Co-authored-by: Josh L <josh11b@users.noreply.github.com>
2024-10-03 20:24:28 +00:00
Geoff RomerandJon Ross-Perkins dc32aa2690 Initial support for binding patterns in SemIR (#4221)
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.

See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.

---------

Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
2024-09-25 19:12:58 +00:00
Richard Smith 8d45530c5f Add a note: prefix to all notes. (#4330)
Omit the `note: ` prefix and the snippet from the "in import" note that
precedes a diagnostic.

This makes our diagnostic output more closely match that of Clang and
GCC.
2024-09-23 23:59:25 +00:00
Jon Ross-PerkinsandRichard Smith e7aebbe581 Update basic diagnostic capitalization/punctuation (#4328)
This is a primarily automated change:

- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
    - `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
    - `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
    - ERROR -> error
    - WARNING -> warning

---------

Co-authored-by: Richard Smith <richard@metafoo.co.uk>
2024-09-19 21:32:53 +00:00
Richard Smith 2044366652 Support initialization of specific classes from struct literals (#4320)
Add support for initializing types like `GenericClass(i32)` from a
struct literal. A new kind of instruction, `complete_type_witness`, is
added to the class definition to track the object representation type so
that it's visible to the generics machinery. Accesses to the object
representation of a class have all been updated to pass in the class's
`SpecificId` so that the types of the fields of the specific class are
used instead of the types of the fields of the generic class in places
that look at the object representation -- primarily class
initialization.
2024-09-19 19:18:32 +00:00