This creates a new check/type.h for most logic, and also moves some
functions to TypeStore in sem_ir/type.h. My approach for TypeStore is to
focus on moving the read-only functions there.
To do this, we restructure the parse tree to make `forall` a leaf node
that comes before the parameter list.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
If 'extend impl' is invalid, mark the impl as invalid by putting an
ErrorInst in the witness_id field.
The construction of the witness_id can otherwise return an ErrorInst but
impl lookup was not checking for that. Now have impl lookup check for an
error there before attempting to deduce generic parameters, which avoids
infinite recursion through deduction in cases like a cyclical impl of
itself.
Adds a testcase for infinite impl-of-itself lookup found by fuzzer.
Based on [the lastest thinking on
#4672](https://github.com/carbon-language/carbon-lang/issues/4672#issuecomment-2606209281)
, require a full syntactic match for impl redeclaration, instead of
excluding the `where` restriction. This means no updates to the impl
witness on redeclaration, and no diagnostics that those updates are
consistent.
Not included in this PR, but will need to be done in the future:
* Support for assigning values to associated constants in the body of
the impl definition. This will require moving the checking that
non-function associated constants are set from the definition start to
definition end.
* Identify semantic redeclarations that are not syntactic matches to
give a failed redeclaration diagnostic. This should be done once we are
already identifying impl declarations with the same type structure in
order to require they be identified in an impl_priority/match_first
block.
* Merging of the functions in `check/impl.cpp` that are now always
called together.
Also add some test coverage of `where` parsing I developed in PR I've
now abandoned because of this new simplification of the impl
redeclaration semantics.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Rename `CheckIsAllowedRedecl` to `DiagnoseIfInvalidRedecl` to try to
better document behavior, and clean up comments.
This extends the no-merge-if-defined behavior to functions. It was
already the case for class/interface, and just added for impl, so if
anything functions were now inconsistent. I was kind of tempted to make
a helper for it, but I didn't think of a great structure/name to get
there: `DiagnoseRedef` isn't always called when it's a redefinition, for
example due to `extern` diagnostics, it's hard to combine.
Cleans up `is_defined` calls to rely more on `has_definition_started`,
removing some code paths that are unused since definitions aren't
merged.
Fixes a crash, see the new regression test in
toolchain/check/testdata/impl/no_prelude/generic_redeclaration.carbon.
Stopping merging seems like the most straightforward way to prevent
references to generic regions with the incorrect block.
With this change, we now support impl of interfaces with non-function
associated constants.
Also:
* Make impl diagnostics use more consistent names
* Make some impl tests "no_prelude"
Still to do:
* Facet type resolution as a separate, reusable step
* Using the assigned values of associated constants (see
`fail_todo_use_assoc_const.carbon`)
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
* Implement ignoring the difference between `Self as` and `as`, as well
as `where` clauses at the end of an `impl` declaration when checking
whether `impl` declarations match, from #3763.
* Allow impl declarations with different constraint ids to match, as
long as the facet type of the constraint has the same interface_id and
specific_id.
* Add some TODOs reflecting future facet type resolution.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Note that I left some calls to `is_defined()` where I thought they were
interchangeable.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
This is a preparation change for adding name poisoning support
(https://github.com/carbon-language/carbon-lang/issues/4622), which is
expected to require more elaborate logic around NameScope since a name
can be not defined yet, defined, or poisoned.
The API separates looking up a name from getting the full entry since we
have cases where the entries are invalidated between the time we're
looking for the name and when we access (and sometimes modify) the
entry.
This change has the following benefits:
* `names` and `name_map` are internal to `NameScope` and are guaranteed
to match.
* `extended_scopes` and `import_ir_scopes` can not be manipulated (only
new scopes can be added).
* `inst_id`, `name_id` and `parent_scope_id` are constants.
* `has_error` can only be mutated from false to true.
---------
Co-authored-by: jonmeow <jperkins@google.com>
`ids.h` and `ids.cpp` are the manual edits, everything else is
search-and-replace.
The full list of things moved is:
- `TypeId::TypeType`
- `TypeId::AutoType`
- `TypeId::Error`
- `ConstantId::Error`
This is to unblock removing `InstId::Builtin*`.
This introduces `calling_convention_param_ids`, a single block that
consolidates all the information that was being used by consumers of
`param_refs` and `implicit_param_refs`, in a form that's easier to
produce and typically easier to consume.
See also [this Discord
discussion](https://discord.com/channels/655572317891461132/655578254970716160/1300545448909738125)
regarding the decision to keep the return slot last in the SemIR calling
convention, even though it goes first in the LLVM calling convention.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
* The `extended_scopes` in a `NameScope` were represented by a
`NameScopeId`. Replace that with an `InstId` of an instruction returning
the type that is extending this name scope.
* `Context::LookupQualifiedName` now can take multiple scopes to look
in.
* `GetAsLookupScope` was moved out of `member_access.cpp` and is now
`Context::AppendLookupScopesForConstant`
This PR also fixes some existing issues that were revealed as part of
writing and testing this PR:
* Additional validation and handling of invalid ids.
* `extend impl` in a class is not properly imported yet, but at least
now it doesn't crash.
The change to use an `InstId` also allowed some diagnostics and
formatting to be improved.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
- Generate runtime indices as part of pattern matching, rather than as a
separate postprocessing/rewriting step.
- In contexts where runtime parameters aren't permitted, avoid emitting
insts for them to begin with, rather than trying to detect the problem
and rewrite the IR to remove them later on.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Refactor the current function call deduction logic to make it reusable.
Call into it from `impl` deduction. Also build a generic region for the
definition portion of a generic `impl` and substitute into it before
accessing the witness in a specific `impl`.
This is enough to get simple uses of generic `impl`s to work. The main
blocker for more complex cases is that we have very little support for
non-trivial deduction, so while we can deduce `forall [T:! type] T as
I`, we can't deduce `forall [T:! type] C as I(T)` yet.
Instead of stringifying types in the caller in some cases, add new types
to represent:
- `InstIdAsType`: an `InstId` diagnostic argument that represents a type
expression that should be included in the diagnostic
- `InstIdAsTypeOfExpr`: an `InstId` diagnostic argument that represents
an expression whose type should be included in the diagnostic
For these cases, we can produce more user-friendly descriptions of a
type than we can with a canonicalized `TypeId`. Add comments to
discourage using `TypeId` diagnostic arguments when one of the above can
be used, and move over existing uses where it's straightforward to do
so.
Move type stringification code to its own files and out of `SemIR::File`
to make `File` smaller and to further discourage the direct use of the
stringification logic.
Also update type printing to include the `` ` `` delimiters surrounding
the type. The intent is that we will eventually want to include other
information when formatting a type, like Clang does when printing a
typedef (`'string' (aka 'std::basic_string<char>')`), and such
formatting requires that the diagnostic machinery produces the `` ` ``s
itself.
There are a couple of cases where we really want to format valid Carbon
type syntax directly into a diagnostic, rather than an `aka` or similar,
because the diagnostic text includes part of the type itself, for
example: ``"consider using `partial {0}`"``. For such cases, a `Raw`
form of the diagnostic argument types is added: `TypeIdAsRawType` and
`InstIdAsRawType`. In principle we could instead use ``"consider using
`partial {0:raw}`"``, but our diagnostic machinery isn't set up for
that.
---------
Co-authored-by: josh11b <15258583+josh11b@users.noreply.github.com>
If the bucket is of size zero or one, which is expected to be the common
case, then store it directly. For the remaining cases, use a side table
of lookup buckets.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Update impl handling to more closely match other kinds of declaration,
including support for declaring and defining gneeric `impl`s.
When of performing redeclaration lookup for impls by looking for the
self and constraint type, produce a list of impls rather than a single
impl because it's possible for there to be multiple impls with different
deduced parameters but the same self type and constraint. Following
#3763, only consider impls to be redeclarations if they're spelled the
same, not just if they have the same self and constraint types.
No support yet for impl selection to deduce the arguments of a generic
impl.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Introduces the `BindingPattern` and `SymbolicBindingPattern` insts, and
a separate stack of pattern blocks that they are emitted into. The
intent is to generate the corresponding pattern-matching insts (like
`BindName`) from them in a separate pass, but that is deferred to future
PRs.
See
[here](https://docs.google.com/document/d/1U_vQH17V893J9aF1LJXUnFYBNSs2MjKl4bJPaWCB2zo/edit?usp=sharing&resourcekey=0-w0xGYZ0An31Kpz-wvzSXwQ)
for the design this is based on, but note that during review we have
chosen to deviate from that design by putting the patterns in separate
blocks, and omitting the "forward references" from a `BindingPattern` to
its corresponding `BindName`. This in turn necessitates having separate
inst kinds for symbolic and non-symbolic binding patterns.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This is a primarily automated change:
- Search & replace for capitalization
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s")([A-Z])`
- `$1\L$2`
- Search & replace for period
-
`(CARBON_DIAGNOSTIC\((?:\n\s+)?\w+,(?:\n\s+)?\s\w+,(?:\n\s+)?\s"(?:[^)]|\n)+)\.("[,)])`
- `$1$2`
- Limited search & replace for `ERROR: ` -> `error: ` in streamed things
- Leaving a TODO for command_line because there's more cleanup that can
be done there
- Modify diagnostic_consumer.cpp
- ERROR -> error
- WARNING -> warning
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Move subtree sizes over to TreeAndSubtrees, using the different
structure to represent the additional parse work that occurs, as well as
making it clear which functions require the extra information. My intent
is to make it hard to use this by accident.
The subtree size is still tracked during Parse::Tree construction. I
think a lot of that can be cleaned up, although we use it during
placeholder assignment so it may take some work. I wanted to see what
people thought about this before taking action on such a change.
I'm using a 1m line source file generated by #4124 for testing. Command
is `time bazel-bin/toolchain/install/prefix_root/bin/carbon compile
--phase=check --dump-mem-usage ~/tmp/data.carbon`
At head, what I'm seeing is:
```
...
parse_tree_.node_impls_:
used_bytes: 61516116
reserved_bytes: 61516116
...
Total:
used_bytes: 447814230
reserved_bytes: 551663894
...
1.43s user 0.14s system 99% cpu 1.565 total
```
With `Tree::Verify` disabled completely, it looks like:
```
parse_tree_.node_impls_:
used_bytes: 41010744
reserved_bytes: 41010744
...
Total:
used_bytes: 427308858
reserved_bytes: 531158522
...
1.20s user 0.13s system 99% cpu 1.332 total
```
Re-enabling just the basic verification (what is now `Tree::Verify`),
I'm seeing maybe 0.05s slower, but that's within noise for my system. I
do see variability in my timing results, and overall I think this is a
0.2s +/- 0.1s improvement versus the earlier (always testing `Extract`
code) implementation. That's opt; debug builds will be unaffected,
because the same checking occurs as before.
Note, the subtree size is a third of the node representation, which is
why I'm showing the decrease in memory usage here.
Note this isn't implementing checking through imports. The parse node
there is harder to access through the context, so would require
examining the entity in order to get the import declaration, to get at
the ImportIR. We also don't have a parse tree attached in that case, and
would need to add one to SemIR::File. But I believe we do want to add
that, so it's explicitly a TODO.
Note GetTokenText re-lexes literal values, so there's a bit of potential
overhead there. Not sure if we want a more efficient manner for
comparing in cases like this.
This is for consistency with #4120. Similar to that, we can use
overloads on the typed NodeId rather than individually named handlers.
There isn't the same caller benefit here though, since the calls from
check.cpp are already boilerplate.
Playing with the macro suggestion on #4028, replace DeclKind with some
templating that asserts the in-use token is an introducer token. This
allows type-safe usage of Lex::TokenKind, reducing the benefit of a
separate enum while improving stdout (since now this will ostream as the
keyword name).
With private modifiers, we'll want to start checking modifiers later,
e.g. after a name conflict is detected (and potentially merged). I think
we've agreed to be more explicit about whether the modifier functions
are manipulating state, versus trying to keep the state on the stack a
little longer (moving Pop to the end of these functions).
Removing FileScope from the stack and renaming it to DeclIntroducerStack
to better reflect the usage and behavior. The FileScope mostly reflects
an approach that wasn't ultimately adopted.
Most of these are places where we failed to include a header file and
simply never got an error about this. The fix is to include the header
file.
Most other cases are functions that should have been marked `static` but
were not. Finding all of these was a main motivation for me enabling the
warning despite how much work it is.
One complicating factor was that we weren't including the `handle.h` for
all the state-based handler functions. While this isn't a tiny amount of
code, it is just declarations and doesn't add any extra dependencies. It
also lets us have the checking for which functions need to be `static`
and which don't. For the `parse` library I had to add the `handle.h`
header as well, I tried to match the design of it in `check`.
I have also had to work around a bug in the warning, but given the value
it seems to be providing, that seems reasonable. I've filed the bug
upstream: https://github.com/llvm/llvm-project/issues/94138
I also had to use some hacks to work around limitations of Bazel rules
that wrap `cc_library` rules and don't expose `copts`. I filed a bug for
`cc_proto_library` specifically:
~https://github.com/bazelbuild/bazel/issues/22610~https://github.com/bazelbuild/bazel/issues/4446
Jon Ross-Perkins
Geoff RomerandJon Ross-Perkins
Dana Jansens
josh11bandJosh L
Boaz Brickner
Chandler Carruth