In line with the proposal in #4682, this changes the array syntax to be
array(T, N). `array` is a builtin keyword which must be followed by
parens containing two expressions and a separating comma.
The array type expression is still fully builtin, it does not forward to
a Core.Array library type yet. It merely adds the `ArrayType`
instruction, as was done with the previous syntax.
Followup work will change the instruction to reference to Core.Array,
once the library type exists and can be used directly.
---------
Co-authored-by: zygoloid <richard@metafoo.co.uk>
For an expression such as `(Type as Interface).AssocFn()`, track the
`Self` type `Type` in the result of the member access so that it's
available when checking the function call.
This introduces a new kind of type, `ImplFunctionType`, that represents
the type of a function that is expected within an impl, modeled as the
type of the function within the interface plus a value to use as `Self`.
Calls to values of this type behave like calls to the underlying
function except that the `Self` parameter is pre-bound to the self type
from the facet.
In order to support this, fix an issue where the imported list of
generic bindings lost their association with their enclosing generic.
This adds a little complexity to `import_ref`, including a new recursive
cycle that I intend to address in a follow-up PR.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
High level, replacing `Id::Invalid` with `Id::None` and `Id::is_valid`
with `Id::has_value` for clarity, as discussed
[here](https://discord.com/channels/655572317891461132/655578254970716160/1331664574545395794).
The `IntId` refactoring is needed together with `AnyIdBase` because it's
also used with `ValueStore`.
Note, trying to be careful not to rewrite `EnumBase::InvalidIndex`, or
`is_valid` in general (e.g., `IdKind::is_valid`).
I've tried to sequence commits here:
1. Automatic replacements:
- `((?:Id|Index)(?: |::|\(|Base(?:\(|::)))Invalid((?:Index)?\W)` ->
`$1None$2`
- `<invalid>` -> `<none>`
- `InvalidNodeId` -> `NoneNodeId`
- `/\*invalid\*/` -> `/*none*/`
- `id((?:_|\(\))(?:\.|->))is_valid` -> `id$1has_value`
2. Manual edits:
- In `int.h` and `int_test.cpp`
- `IntT` has `is_value`, which I'm renaming to `is_embedded_value`.
- Manual edits to comments in this file.
- `AnyIdBase` and `IdBase`
- Declaration of `is_valid` -> `has_value`, `InvalidIndex` ->
`NoneIndex`.
- In `ids.h` and `ids.cpp`
- `is_valid` -> `has_value`
- `// An explicitly invalid ID.` -> `// An ID with no value.`; similar
for index
- Various math on `InvalidIndex` -> `NoneIndex`
- Various mentions of "valid" in comments
- In `value_store.h`, for `IdT::Invalid`, plus one comment
- In `impl.h` and `tokenized_buffer.h`, we had different initialization
of `::None` values (versus `ids.h` syntax) that I fixed manually.
- Spot checks to compile
- Particularly where `is_valid` replacements didn't catch spots due to
different naming.
3. Autoupdate tests
4. verbose.carbon (NOAUTOUPDATE)
5. Comment spot checks
Note there are probably other mentions of "Invalid" that should be swept
up, but I'd like to argue for merging and separating out remaining
cleanup since this is so sweeping (and likely to hit merge conflicts
from churn). We'll probably have lingering mentions of "invalid" for a
bit regardless, just because there are uses of "invalid" in non-Id APIs.
Changes the name of SemIR `import_ref`s to use the format
`<package>.<entity>`.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr>
<td><code>%import_ref.05a: type</code></td>
<td><code>%Main.D: type</code></td>
</tr>
<tr>
<td><code>%import_ref.8f2: <witness></code></td>
<td><code>%Main.import_ref.8f2: <witness></code></td>
</tr>
</table>
* [Discord discussion in
#toolchain](https://discord.com/channels/655572317891461132/655578254970716160/1330253540999827577)
* Closes#4769
This removes some churn when adding new diagnostic cases to test files
(where previous to this change the newly added newline would cause the
previous diagnostic CHECKs to be updated including changes to the line
number because the CHECK for the blank line meant an extra line between
CHECK and source line).
A few alternatives discussed here:
https://discord.com/channels/655572317891461132/655578254970716160/1329573358475673723
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a Vtable typed inst with a type_id (of the type this vtable applies
to) and list of virtual function decls (or import refs to function
object constants).
This doesn't add lowering/emission of the vtable, or usage when
initializing objects of the type.
Some questions in case they're interesting to discuss:
* is it right/worth having the type_id in the vtable? (probably makes it
easier to emit - using the type to get the class name to figure out the
mangled name for the vtable) perhaps it should be a ClassId?
* I'm thinking the logic in CheckCompleteClassType could be the place we
handle diagnostics for mismatched keywords (virtual/abstract for a
function that's already virtual/abstract, maybe checking for non-virtual
functions with the same name in a base class, or derived class functions
without `impl`, etc) - but we could move some of that to the moment we
walk the function decl, and record our findings in the function decl
(record the base function it overrides, or the index of the vtable to
slot to use when building the vtable at the end of the class)
* the Vtable typed inst has `constant_kind = InstConstantKind::Always`
and `is_lowered = false`, I think I added that in to workaround/address
some failures in lowering. And seems correct for this intermediate step
- I'll add lowering in a follow-up patch. But the constant_kind - what
should this be? We can just say all vtables are of VtableType (in which
case the `Always` constant kind sounds right to me) or we could have
them introduce a type with each virtual function as a named member,
even?
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When printing a Class, the complete_type_witness was printed last but
this gave a somewhat misleading representation as it appeared to be part
of the !members label. Move it above the label so that the label more
clearly refers to everything below it.
Include the index rather than the name in the fingerprint of a symbolic
binding. While both the index and the name contribute to the canonical
identity, using either one of them in the fingerprint is sufficient to
ensure that distinct entities get different fingerprints. Changing the
name of a symbolic binding should ideally not result in fingerprint
changes, so exclude the name from the fingerprint when we have an index.
Use the canonical type and constraint when fingerprinting an impl, so
that uses of names in `name_ref` instructions aren't considered, only
the entity the name resolves to, and different ways of spelling the same
type have the same fingerprint. This similarly allows compatible changes
to be made to impls without changing the fingerprint.
Exclude the declaration block when determining the fingerprint of a
declaration. The declaration block contains the declarations of
parameters of the declaration, which do affect whether two declarations
are identical, but not whether they denote the same entity, because it
would be invalid to have different declaration blocks for declarations
with the same name in the same scope. Therefore changes to the
declaration block are compatible, and it's useful for such changes to
not affect the fingerprint.
This is not easy to test in isolation with our current testing
machinery. However, a follow-on PR will change the name of a parameter
in the prelude, and with this in place, will not cause any changes to
occur elsewhere in the toolchain tests.
Use it in the instruction namer to make instruction names more stable
across unrelated changes to the toolchain or the prelude.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
* Change `InterfaceWitness` -> `ImplWitness`
* Include a `SpecificId` in the `ImplWitness`. This allows the
`InstBlock` it contains to have its own identity, allowing it to be
changed as the impl is processed. Evaluation only updates the specific.
* Create the `ImplWitness` at the start of the impl definition. In the
future, this will be populated with the values of non-function
associated constants. For now, it starts full of invalid instruction
ids.
* Implements the model suggested in #4672 .
Note that the non-SemIR testdata changes are to these file:
* `toolchain/check/testdata/impl/lookup/fail_todo_undefined_impl.carbon`
* `toolchain/check/testdata/struct/import.carbon`
* `toolchain/check/testdata/tuple/import.carbon`
The last two are due to an import of generics bug exposed by this PR,
which will be fixed in a follow-on.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of providing operations only for `i32`, provide them for all
`iN` and `uN` types.
For now, this excludes the `*Assign`, `Inc` and `Dec` interfaces,
because the implementations for those are defined as Carbon functions
rather than builtins, and we can't yet lower definitions for specific
functions, so converting those to be generic breaks the build for our
examples.
This is a precondition for enabling the new pattern-matching subsystem
to support binding patterns that have `if` expressions in the type
position.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Instead of treating `Core.Int` as the toolchain's builtin `IntType`,
model it as a class that adapts the builtin type. This aligns us better
with the intended language model, gives an associated library for
`impl`s involving `Core.Int` to live within, and opens the door adding
member functions to `Core.Int` if we decide that is desirable.
Remarkably it also seems to make the formatted SemIR a little smaller,
because a call to a generic class generates less IR than a call to a
function.
For example, format the `ImplicitAs` interface as `Core.ImplicitAs`
rather than simply `ImplicitAs`.
When importing an entity in a namespace, also import a declaration of
the enclosing namespace if necessary so that we can determine its name.
When a generic requires a symbolic type to be complete, add a new
`require_complete_type` instruction to the generic eval block. During
monomorphization of such an instruction, require that type to be
complete.
Goal is to reduce churn in names in test updates (by churning a lot of
them in this PR).
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Use it in the remaining few places where we currently hardcode `i32`: as
the index type in array indexing, as the type for literals in `if`
expressions, and as a valid return type for `Run`.
In preparation for changing `Core.Int` to be a class.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
This seems slightly redundant for a locally-defined class, where there
will be a complete_type_witness instruction earlier in the class, but is
important for imported classes, where we're currently doing the wrong
thing in a way that's invisible in formatted SemIR.
The new `FacetValue` instruction represents `C as I` for some type `C`
and facet type `I`. It is named `FacetValue` instead of just `Facet` to
parallel the `FacetType` instruction.
This PR uses this instruction represent the facet value `Self` in an
`impl` declaration. This instruction will be used in the future to also
support things like:
* `C as I` where `C` is a class; and
* forming a specific for a generic with a `T:! I` parameter where `T` is
being given a concrete value.
(Here `I` is an interface or other non-`type` facet type.)
Also do some renaming and add some comments to make things a bit more
clear.
* `FacetTypeAccess` -> `FacetAccessType` to clarify this is not access
of a facet type, but access of the type of a facet
* `.facet_id` -> `.facet_value_inst_id` to parallel the `FacetValue`
instruction
`FacetAccessWitness` will be in a future PR.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
For the few remaining uses of the builtin `i32` type, manually build an
`IntType(Signed, 32)` value instead. These are:
- The return type of `Run`.
- The type that int literals in an `if` expression are converted into.
- The type of an array index expression.
We should consider converting those three cases away from `i32` over
time.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
When an `IntLiteral` appears as an operand of an `if` expression,
convert it to `i32` for now, so that we don't reject things like `if
cond then 1 else 2` due to having a non-constant value of type
`IntLiteral`.
For tuple indexing expressions such as `(a, b).0`, convert the index to
type `IntLiteral`, not to type `i32`. This isn't strictly necessary to
do in this PR, but avoids the need to provide an `IntLiteral` -> `i32`
implicit conversion for `no_prelude` tests using this syntax.
Instead of leaving array bounds as whatever integer type they arrive as,
convert them to the `IntLiteral` type as part of forming an `ArrayType`.
This ensures that array types canonicalize properly even when the bounds
are specified with different types.
Create an empty generic definition for a generic builtin function to
avoid this causing "use of undefined generic function" errors.
- Do not include entities imported from files that we are not dumping.
- Do not include constants and import_refs that are not referenced by
something that we are including in the formatted output.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Co-authored-by: Carbon Infra Bot <carbon-external-infra@google.com>
This can lead to us trying and failing to print certain kinds of
constant value, but we can fix that in future changes.
Note that `StringifyType` should probably be substantially refactored.
For this change I'm trying to leave the overall structure relatively
intact, but hopefully this additional formatting support will help guide
future refactorings.
This does a few things:
* Replaces the single `TypeId` in the `FacetTypeInfo` struct with a
vector of `InterfaceId`, `SpecificId` pairs (sorted in id order)
representing the set of interface requirements of the facet type. This
will later be used to support facet types with multiple interface
requirements (as in `I & J` or `I where .Self impls J`).
* Replace `InterfaceType` instructions (used as the type of an
`InterfaceDecl` instruction) with `FacetType` instructions (introduced
in #4460) with a (newly introduced) `FacetTypeFromInterface()` function.
* Replace code that consumed `InterfaceType` values with code that
consumed `FaceType` values. I've generally left the assumption in the
code that it is dealing with a single interface, using the (newly
introduced) `FacetTypeInfo::TryAsSingleInterface`, and producing an
error otherwise. There isn't yet support for the `&` operator or `where
.Self impls`, so this is generally a good assumption for now, except you
can get a facet type with no associated interfaces from a `type
where`... expression. In some cases, the facet type value is pulled from
the evaluation of an `InterfaceDecl` instruction, where the single
interface assumption will hold permanently.
* Some related cleans up: nicer stringification and formatting of facet
types, suppression of some errors when there already was an error.
There is still a lot left to do, including:
* Type `type` should be a facet type with a reserved id, replacing the
built-in instruction.
* Code using `TryAsSingleInterface` should generally be upgraded to
handle more than (or less than) one interface. Name lookup should be
particularly exciting.
* Operator `&` should be defined on facet types, unioning their
interface and other requirements.
* Requirements from a `where` clause don't do anything yet.
* Impls and impl lookup need to resolve facet types, and do things like
determine if all the associated constants are given values.
---------
Co-authored-by: Josh L <josh11b@users.noreply.github.com>
Co-authored-by: Geoff Romer <gromer@google.com>
This is primarily to free up space in the BindingPattern insts, but as a
side effect it moves the link between BindingPattern and its BindName
out of the SemIR, and into a transient data structure in Context.
---------
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
When an instruction is created as part of an implicit call to an
interface member, we generated a bunch of constants for naming the
interface, finding the corresponding specific, accessing its member
function, and so on. This led to significant bloat in SemIR.
Instead, we now track whether an instruction is created implicitly in
its location, and where relevant, we use the constant value of the
instruction directly instead of storing a new `Inst`.
This doesn't reduce the amount of work we need to do, but does make the
representation in SemIR smaller and more readable.
This instruction represents integer values, whether they come from
literals or calculations, so it the old name is inaccurate. I also plan
to rename `BigInt` to `IntLiteral` based on recent discussion and this
change aims to avoid confusion stemming from the same name being used
for two different things.
I'm not renaming `FloatLiteral` because recent discussion suggests we
may want distinct `FloatLiteral` versus `FloatValue` representations in
SemIR.
This is in particular to avoid churn from changes such as #4370. I think
the import list can be helpful (particularly to understand what the
library is aware of), but it's a different trade-off for the prelude
package due to the implicit imports.
This PR makes it so that types can implement the `IndexWith` interface
so that they can provide their custom indexing behavior.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Also surround it in square brackets rather than parentheses. This
matches the format used by Clang and GCC, and means diagnostics will
still match the `file:line:col: error: ` pattern used by some IDE tools.
Before:
```console
fail_builtins.carbon:11:11: error(AliasRequiresNameRef): alias initializer must be a name reference
```
After:
```console
fail_builtins.carbon:11:11: error: alias initializer must be a name reference [AliasRequiresNameRef]
```
Also tighten up test regex to only match on `STDERR` lines that list a
file name.
- Generate runtime indices as part of pattern matching, rather than as a
separate postprocessing/rewriting step.
- In contexts where runtime parameters aren't permitted, avoid emitting
insts for them to begin with, rather than trying to detect the problem
and rewrite the IR to remove them later on.
This is to help identify which diagnostics we're actually using.
Note that driver/testdata still has tests which don't pass this flag,
and so continue to test the kind-less (default) behavior.
Also propagate the pattern IR along with the pattern-match IR, and use
it where appropriate.
Strictly speaking, some parts of the pattern-match IR are allocated
eagerly, while traversing the pattern's parse tree, but they still
aren't actually emitted until we traverse the associated pattern insts.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Add a new `specific_function` instruction that represents a generic
function plus its deduced argument list as a callee in a function call.
The new instruction can only appear as the immediate operand of a call
instruction, so we give it a builtin placeholder type.
At the end of each file, require definitions for all specific functions
used in that file. Resolve the generic with the argument list to produce
those specific function definitions as needed, and diagnose if the
generic doesn't have a definition available.
A few tests are updated in cases where they declared and used generic
functions but didn't previously provide a function definition.
The locations point to the first instruction in the generic that needed
the relevant constant value or type.
For now, this must makes the formatted SemIR a bit more useful, but in
the future it will also provide locations for diagnostics caused by
monomorphization failure.
This adds deduction in all the cases where we can match the instruction
fields of the parameter against the corresponding instruction fields of
the argument. This handles all current type constants except for struct
types, for which we would want to match by field name.
---------
Co-authored-by: Jon Ross-Perkins <jperkins@google.com>
Dana Jansensandzygoloid
Calvin
David Blaikie
Geoff RomerandRichard Smith
Brymer MenesesandJon Ross-Perkins