Instead of tracking the cleanup scope depth on entry to each scope,
track an "ambient" cleanup scope depth that's *after* the destructors of
local variables in that scope. This gets increased to include the
destructors of local variables when we create a name-binding
declaration. Then, when we reach a point where temporaries should be
destroyed, run cleanups that are after the ambient cleanup scope depth
on the stack. This happens:
* At the `;` of a statement expression.
* At the `)` of an `if` or `while` statement.
* After performing the implied `HasValue()` call in a `for` statement.
Per informal agreement with leads, this means we lifetime-extend all
temporaries created in the initializer of a name-binding declaration to
the full scope of that declaration, but that temporaries created in an
expression statement are destroyed at the `;`.
Each file dump now starts with a `; ---` comment and ends with a blank
line. This makes it easier to visually scan the dump for a file of
interest. The comment format is somewhat arbitrary; I chose `---` to
align with the `--- filename.carbon` separator in SemIR dumps, but
without the filename, because that appears on each of the next two lines
already.
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Use the Carbon-computed alignment for allocas, loads, stores, and
memcpys. Previously we used whatever LLVM felt like giving us, which
would result in ABI mismatches and runtime crashes due to misalignment
when creating objects of imported C++ class types, as well as resulting
in some surprising choices like `(i32, i32)` and `()` having 8-byte
alignment instead of 4 and 1, respectively.
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
When an initializing expression is used to initialize a var parameter,
we need to create the storage earlier in SemIR than the initializing
expression. To do so, pass a pending block to initialization containing
the var storage.
Also stop using `temporary` for this purpose, since we treat temporaries
as potentially-constant and immutable, but `var` parameters can be
mutated by the callee. We should ideally introduce a new kind of
instruction for this purpose but for now we just use `var_storage`.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
This will be used for const-evaling functions. Splitting into a separate
commit since it touches a lot of test files, and a couple fail_todo
tests are no longer failing.
Previously we forced a temporary materialization, resulting in it being
treated as an ephemeral reference expression. This change allows
```carbon
var x: Class = {} as Class;
```
even when `Class` is not copyable.
This updates lower/testdata to use _ instead of proper names, in order
to avoid the "unused binding" warnings from #2022 which are being
implemented. These changes do not depend on the implementation which
should make everything easier to review.
See #6460 with part 1 of the implementation. It was split upon request
in order to make reviewing easier, the original state of the PR was
updating hundreds of test cases.
The PR has thus been split, part 2 including test cases changes can be
viewed at
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
... many tests need to be updated, so it seems best to get those tests
out of the way that are not interesting.
These are not all tests in lower/testdata - a few of them are
interesting in the sense that they cannot use '_' because it leads to
failed redeclaration check. This is exactly the scenario described in
#3763 which requires the 'unused' marker. Those are left untouched here
but are updated in
https://github.com/burakemir/carbon-lang/tree/unused_pattern_bindings_p2022_impl_part2
This adds just enough debug info for i32/int parameters and return
values, with a path forward for adding DWARF type metadata for other
types.
As it happens, return type information is carried separately from
parameter information:
* Return type information is carried in the `type` of the `DISubprogram`
(as a `DISubroutineType` - which does carry parameter type information
as well, but that's unused when the DWARF is emitted by LLVM)
* Parameter information is carried by `DILocalVariable`s with a non-zero
`arg` value (representing the order of function parameters)
In the absence of locations for the parameters (future work), nothing
would usually keep the `DILocalVariable` live/reachable when emitting
DWARF - so for cases where this can happen (for clang, this happens in
optimized builds where all references to the parameter variable might be
optimized away) the variables can be "retained" in a list on the
`DISubprogram` - achieved by passing `AlwaysPreserve` parameter to
`createParameterVariable` (adds them to a list, then that list gets
attached to the `DISubprogram` when it's finalized later)
For now, any unsupported types are emitted as `void*` (except void
return, which is implemented as void) as a placeholder.
Given this example:
```
import Core library "io";
class MyClass {
}
fn Unsupported(v: MyClass) {
}
fn Ret() -> i32 {
return 42;
}
fn Arg(x: i32) {
Core.Print(x);
}
fn Run() {
}
```
this is the resulting DWARF:
```
DW_TAG_compile_unit
DW_AT_name ("test.carbon")
DW_TAG_subprogram
DW_AT_name ("Unsupported")
DW_TAG_formal_parameter
DW_AT_type (0x00000066 "void *")
DW_TAG_subprogram
DW_AT_name ("Ret")
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Arg")
DW_TAG_formal_parameter
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Run")
DW_TAG_base_type
DW_AT_name ("int")
DW_TAG_pointer_type
```
And the debugger:
```
(gdb) p Ret()
$1 = 42
(gdb) p Arg(4)
4
$2 = void
```
I'm not sure if there's a way this logic should be merged with the logic
for making the `llvm::Function` type (which the `DISubroutineType`
building code was inspired by/copied from) - since they're done at
different times/places, I don't think there's an easy way to do it in
one pass, but maybe the code can be shared (even if it's run twice) in
some generic `SemIR::Function` type walker.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This helps at least lldb handle calling functions (currently the debug
info describes every function as `void()`, so no parameters or return
values are supported) - seems gdb and lldb both depend on demangling to
varying degrees in C code (marking a function as "prototyped" in C in
DWARF does seem to also address this problem).
Given:
```
fn PrintThree() {
Core.Print(3);
}
```
Before:
```
(lldb) p PrintThree()
error: Couldn't look up symbols:
PrintThree
Hint: The expression tried to call a function that is not present in
the target, perhaps because it was optimized out by the compiler.
```
After:
```
(lldb) p PrintThree()
3
(lldb)
```
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
This also does a little restructuring in the same direction, following
#6124.
Leads want `Destroy` to work similarly now for all types. As a
consequence, there doesn't seem to be as much benefit to splitting off
aggregate destruction. In this PR, the `type.destroy` function can now
be expected to destroy anything that's destructible; that means it'll be
usable for the `final fn` once that support is available.
Similarly, this gets rid of the impls other than the single blanket
impl, now using `type.can_destroy`. Since they all need to use the same
function, there's no benefit to splitting approaches. Also, now it can
just be a `final impl` since there should be no need for people to
create specializations -- if this blanket impl applies, it means the
`final fn` is the same.
This also slips in `partial` support since there's no reason to have it
diverge anymore. Also `abstract`, which I'm not sure is broadly testable
since most cases it'd come up, the `abstract` keyword is explicitly
detected/rejected.
Note though that this doesn't make any really big changes. It's just
realigning on the leads decision. I'm going this way to try to reduce
name-related churn for other changes.
Right now, the class destroy impl is incorrectly generated (first
discussed [in
Discord](https://discord.com/channels/655572317891461132/941071822756143115/1418614787449032826)).
If we want it to be correct, deferred definition logic would need to be
added, and the declaration would need to be moved inside the `class`
scope (along with whatever generic logic that needs).
This instead switches to a blanket impl, to avoid creating latent bugs
with generating the `impl` and function body in the wrong scope. This
approach uses the same blanket impl as aggregate destruction that was
added by #6098.
The intent here is to allow progress on other parts of `Destroy`. For
example, under this model the implementation of the function body could
be done as part of lowering the specific.
`fn destroy` is being removed per decision on #6124. It seems like the
relevant decision will result in no more keyword-based function names,
so this is removing all related support.
Attach the cleanup to the `Temporary` instruction instead of to the
`TemporaryStorage` instruction. We create `TemporaryStorage`
instructions speculatively when creating an initializing expression, and
may overwrite those instructions with other instructions if it turns out
that a temporary is not required. Instead, wait until we finalize the
temporary and create a `Temporary` instruction to register the cleanup.
Nicholas Bishop
Geoff Romer
Richard Smith
David Blaikie
josh11bandJosh L
Jon Ross-Perkinsandjonmeow
Burak Emir
