Implementing interface modifiers causes an infinite loop when generating
fingerprints because the witness value generates a fingerprint that's
dependent on something dependent on the witness value. We've debugged
this to the witness table's `elements_id` field.
This hack is a workaround for creating a new block type whose value is
not codependent with its identity.
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Co-authored-by: Richard Smith <richard@metafoo.co.uk>
Point symbolic witnesses into `.Self` written inside an impl decl at the
impl that is being declared. This is tricky because the impl does not
yet exist. So we use a new instruction `ImplSelfWitness` which _will_ be
replaced by the `ImplWitness` once it becomes available. The
`ImplSelfWitness` acts like a symbolic witness, except it does not
perform lookup, since we know which impl we will get a witness from.
This prevents us from finding other impls when performing lookups into
`.Self` in an impl decl, which produces incorrect/incoherent results.
As discussed in the 2026-06-14 toolchain open meeting, `Range`
is a better fit for the prelude than as a general library in
`Core`. This PR moves `Range` into the prelude, and updates
the build infrastructure and various tests to reflect that
change.
Refactors the link driver to automatically compile and cache the carbon
prelude for use in linking.
Implements a `carbon_library` rule for compiling the Core library
dependencies in the examples.
In #7436 we stopped substituting `.Self` when collecting witnesses out
of a facet type. While this was correct, it did not capture all the
cases that need to avoid substituting `.Self`. And it poisoned the
`IdentifiedFacetType` cache by not replacing `.Self` but storing the
result in the cache. This led to incoherent behaviour, where the result
of an impl lookup would change depending on which ones had been done
previously.
Now we use a flag to track for each `.Self` if we're currently
type-checking inside the scope where it was introduced in a facet type.
While inside that scope, identify should not replace the `.Self`. Any
use of it should remain as-is since we don't yet know what value will
replace it. We call this state "frozen" since it should not be modified
by identify. This requires a substitution step when we leave the scope
that introduced the `.Self`, to remove the flag. The flag is set in the
`EntityName` of the `SymbolicBinding`, and is part of the canonical
value, since `.Self` can become part of types, which are constants, and
the flag needs to follow it for correct behaviour.
We also have to ensure the flag is the same when doing comparison with
constants from inside a facet type and constants from outside. For
instance in `(Z where .Z1 = ()) where .Z2 = .Z1`, when we arrive at the
second `.Z1` its `.Self` will be frozen, while the `.Z1 = ()` contains a
non-frozen `.Self`. So we add the frozen flag to the first when storing
it in `where_stack` in order to compare the constant values of the two
`.Z1`.
The `WhereExpr` requirement inst kinds now have an `InstConstantKind` of
`AlwaysUnique` instead of `Never`. This allows us to add them to the
usual InstBlocks, and in an `eval fn` body they have a constant value,
so eval does not fail when trying to call that function. We have to be
careful to not consider `AlwaysUnique` as being actually concrete
though, since their constant value erases `.Self`-dependence. This
allows us to stop special casing them when thawing the requirements
block in a `WhereExpr`, and we can just thaw each `InstId` in the block
in a straightforward manner.
We add the new flag to the instruction's fingerprint and name in
formatted semir.
Each file dump now starts with a `; ---` comment and ends with a blank
line. This makes it easier to visually scan the dump for a file of
interest. The comment format is somewhat arbitrary; I chose `---` to
align with the `--- filename.carbon` separator in SemIR dumps, but
without the filename, because that appears on each of the next two lines
already.
Adds support for arithmetic and comparison operators on
`Core.CharLiteral`s, as well as conversions between `CharLiteral` and
integer types.
Make some minor tweaks to fix skill issues encountered while making this
change.
Assisted-by: Gemini via Antigravity
Fix import logic to make all imported packages be children of the
`NameScopeId::Package` scope. Previously, indirectly-imported packages
would end up as children of their importing package's scope, which
resulted in them not being treated as packages at all, and in particular
not being fingerprinted as packages.
Fixing that caused a failure in the fingerprinting logic as we started
to encounter packages with no correspoding import scopes. Instead of
looking for import scopes, use a simpler mechanism to map packages to
their package names, and clean up.
Unfortunately the latter change churns all the fingerprints again :(
Hopefully this is the last time for a while.
Implement support for floating-point <-> integer type conversions as
described in #820 and #845, extended to support `unsafe as` conversions
for the conversions that can't be expressed as either implicit
conversions or `as` conversions.
One tricky part here is conversions from floating-point literals to
integer types. Such literals may have both a very large mantissa and a
corresponding somewhat large negative exponent, and still produce a
result that is in the range of values that a small integer type can
represent. In order to support that while avoiding building very large
2^N or 10^N constants in general, we first compute a conservative
approximation of the number of bits necessary to represent the integer
result, with an early exit if the number is either definitely too large
or definitely zero. The remaining cases have a reasonable bound on the
size of integer necessary to compute the base^exponent multiplicand.
Assisted-by: Gemini via Antigravity
When we import from another library in the same package, its entities
end up with our library as their parent scope, resulting in cross-file
fingerprint mismatches. Instead, only include the library ID when
fingerprinting either a package-private entity or an `ImportIRId` that
refers to a particular `SemIR::File`.
Include the library name in the fingerprint of an entity declared
`private` at namespace scope. Include the entity's fingerprint in the
mangling of a library-private entity.
This fixes miscompiles if two libraries in the same package declare
`private` entites with the same name. We can't fix this with internal
linkage because library-private entities can be reachable through
generics defined in the API file of the library.
Assisted-by: Gemini via Antigravity
Fixes link failures when referencing a symbol involving a fingerprint
from a different package.
Previously we included the `Namespace`'s `import_id` as part of its
fingerprint, which caused local and imported namespaces to get different
fingerprints. We now store the `import_id` on the `NameScope` instead of
on the `Namespace` inst to avoid this problem.
Also, when we reach a package-level `NameScopeId`, consistently
fingerprint it as a (package name, library name) pair. Previously the
fingerprinting depended on whether it was imported or not, as an
imported `NameScopeId` had a parent scope (the current package). We need
to include the library name here so that private entities with the same
name in different libraries have different fingerprints.
Fixes mangling collisions when two thunks with the same name (eg, `Op`)
are created in the same context, which in turn would lead to LLVM
verifier failures and miscompiles.
To support this, add a new value store to track a little more
information about thunks beyond what's in the `Function`.
This is only fixing the decision about *whether* to produce a witness.
Implementation of the witness is still a TODO, though where a body is
generated, it should also precisely reflect where one _needs_ to be
generated.
Note the tests:
- toolchain/lower/testdata/function/generic/import_core_witness.carbon
- toolchain/lower/testdata/function/generic/import_unused_def.carbon
These tests can probably be produced _without_ Core.Destroy, but I found
the essence of them while trying to build //examples with Core.Destroy
and a simpler minimization wasn't striking me.
Assisted-by: Google Antigravity with Gemini
---------
Co-authored-by: jonmeow <jperkins@google.com>
When a `var` is not explicitly given an initializer, initialize it in
one of two ways:
* If its type implements the new interface `Core.Default`, call
`Core.Default.Op` to initialize it.
* Otherwise, if its type implements `UnformedInit`, leave it in an
unformed state. For now, this is always an uninitialized state, but that
will change in the future.
* If neither of those apply, the `var` declaration is ill-formed.
This is a step towards implementing leads decision #6739 and proposals
#257 and #5913.
Assisted-by: Gemini 3.1 Pro via Antigravity
---------
Co-authored-by: Geoff Romer <gromer@google.com>
Add an `IntFitsIn` interface with a custom witness, such that `T impls
IntFitsIn(U)` if `T` is an integer type all of whose values fit
losslessly into the integer type `U`. Use it to constrain implicit
conversions between integer types.
So far, this has not been extended to the
`CppCompat.[U]{Long32,LongLong64}` types, only to `Core.Int(N)` and
`Core.UInt(N)`.
Assisted-by: Gemini 3 Pro via Antigravity
Support an implicit conversion from `T*` to `Cpp.void*` and to `const
Cpp.void*`, and an `unsafe as` conversion in the opposite direction.
In order to support C++ calls taking and returning `void*` (which get
mapped to Carbon `Optional(Cpp.void*)`, also support conversions from
`Optional(T)` to `Optional(U)` if there's a conversion from `T` to `U`.
Fix a bug in `OptionalStorage` for `T*` where its `HasValue` was exactly
backwards.
### Description
Mangling collisions occur when implementing interfaces with generic
parameters. The mangler does not use the specific id, causing the same
symbol `_C[FunctionName].[PackageName]:[InterfaceName].[PackageName]` to
be generated for all of the implementations below:
```carbon
// Generic interface parameters ignored
impl C as I(A)
impl C as I(B)
// Generic class parameters ignored
impl D(A) as I
impl D(B) as I
// Both ignored
impl D(A) as I(A)
impl D(B) as I(B)
```
### Changes
Updated the mangling logic for `SemIR::ClassDecl` and
`SemIR::InterfaceDecl` to include the specific id. Now the mangling
ensures unique symbols for generic implementations using the format:
`_C[FunctionName].[FunctionSpecificId].[PackageName]:[InterfaceName].[InterfaceSpecificId].[PackageName]`.
Closes#6498
Pursuant to recent decisions on #6124, switch `Destroy` to use a
`CustomWitness` for its implementation. Right now this is manufacturing
no-op implementation functions on each lookup, which obviously isn't
ideal but is intended as a first pass. I'm mostly trying to find the
right balance between updating the approach to reflect new decisions,
while still breaking apart work in a way.
The `CoreInterface` logic is intended to build on `CoreIdentifier`
support. We have a number of additional interfaces that require
specialized logic, and that'll extend pretty far with C++ interop, so it
seemed easiest to have a generic function for it. That's what's
replacing the logic inside C++ interop that was doing string comparisons
(which could have already been moved to `CoreIdentifier`, I just missed
it in my first pass).
This adds `CustomWitness` support because the `Destroy` witnesses can be
imported cross-file. `CustomWitness` was previously only used for C++
types, which don't yet support import, which is why that wasn't
previously an issue. The addition of `query_specific_interface_id` is
similarly needed in order to get correct sorting of witness blocks when
imported.
This PR also removes builtin constraint logic (note this is in a
separate commit to help review; it's not a separate PR because it's
difficult to split apart without tests breaking). This had been made
generic with the expectation that destroy, copy, move, and conversions
would all need related support. Under the new decision, we are not going
to do blanket impls and will instead just manufacture a `CustomWitness`
for everything.
A lot of SemIR fingerprints change, but that's probably because the
addition of `Destroy` on core classes is yielding structural changes.
Instead of naming the root namespace `package` (because it's accessed by
the `package` keyword), change it to use the current package name. Note,
buried in the checksum changes,
`toolchain/check/testdata/package_expr/fail_not_found.carbon`:
```
- // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `package` [MemberNameNotFoundInInstScope]
+ // CHECK:STDERR: fail_not_found.carbon:[[@LINE+4]]:16: error: member name `x` not found in `Main` [MemberNameNotFoundInInstScope]
```
for:
```
// CHECK:STDERR: var y: i32 = package.x;
// CHECK:STDERR: ^~~~~~~~~
```
I'll leave it to you if you prefer this; the alternative I see is to
just rename `IsCorePackage` to `IsImportedCorePackage`, and/or change it
to a helper that takes a `Context` and does the right thing with
`parse_tree` (which, I need for `Destroy`-related reasons and was my
default approach).
This is a prerequisite for support for interop with C++ template names.
No behavior change here, except that it sadly changes the fingerprinting
for a lot of tests.
This adds just enough debug info for i32/int parameters and return
values, with a path forward for adding DWARF type metadata for other
types.
As it happens, return type information is carried separately from
parameter information:
* Return type information is carried in the `type` of the `DISubprogram`
(as a `DISubroutineType` - which does carry parameter type information
as well, but that's unused when the DWARF is emitted by LLVM)
* Parameter information is carried by `DILocalVariable`s with a non-zero
`arg` value (representing the order of function parameters)
In the absence of locations for the parameters (future work), nothing
would usually keep the `DILocalVariable` live/reachable when emitting
DWARF - so for cases where this can happen (for clang, this happens in
optimized builds where all references to the parameter variable might be
optimized away) the variables can be "retained" in a list on the
`DISubprogram` - achieved by passing `AlwaysPreserve` parameter to
`createParameterVariable` (adds them to a list, then that list gets
attached to the `DISubprogram` when it's finalized later)
For now, any unsupported types are emitted as `void*` (except void
return, which is implemented as void) as a placeholder.
Given this example:
```
import Core library "io";
class MyClass {
}
fn Unsupported(v: MyClass) {
}
fn Ret() -> i32 {
return 42;
}
fn Arg(x: i32) {
Core.Print(x);
}
fn Run() {
}
```
this is the resulting DWARF:
```
DW_TAG_compile_unit
DW_AT_name ("test.carbon")
DW_TAG_subprogram
DW_AT_name ("Unsupported")
DW_TAG_formal_parameter
DW_AT_type (0x00000066 "void *")
DW_TAG_subprogram
DW_AT_name ("Ret")
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Arg")
DW_TAG_formal_parameter
DW_AT_type (0x00000062 "int")
DW_TAG_subprogram
DW_AT_name ("Run")
DW_TAG_base_type
DW_AT_name ("int")
DW_TAG_pointer_type
```
And the debugger:
```
(gdb) p Ret()
$1 = 42
(gdb) p Arg(4)
4
$2 = void
```
I'm not sure if there's a way this logic should be merged with the logic
for making the `llvm::Function` type (which the `DISubroutineType`
building code was inspired by/copied from) - since they're done at
different times/places, I don't think there's an easy way to do it in
one pass, but maybe the code can be shared (even if it's run twice) in
some generic `SemIR::Function` type walker.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
This helps at least lldb handle calling functions (currently the debug
info describes every function as `void()`, so no parameters or return
values are supported) - seems gdb and lldb both depend on demangling to
varying degrees in C code (marking a function as "prototyped" in C in
DWARF does seem to also address this problem).
Given:
```
fn PrintThree() {
Core.Print(3);
}
```
Before:
```
(lldb) p PrintThree()
error: Couldn't look up symbols:
PrintThree
Hint: The expression tried to call a function that is not present in
the target, perhaps because it was optimized out by the compiler.
```
After:
```
(lldb) p PrintThree()
3
(lldb)
```
Adds a flag `--optimize=<mode>` that specifies what to optimize for:
* `--optimize=none` turns off the optimizer as much as possible, but
still respects always_inline.
* `--optimize=debug` aims to be the equivalent of `-Og` / `-O1`, and
provides optimizations that don't affect the ability to debug the
program. This is the default.
* `--optimize=size` optimizes for the size of the produced program, and
aims to be the equivalent of `-Oz`.
* `--optimize=speed` optimizes for the execution time of the produced
program, and aims to be the equivalent of `-O3`.
Following the approach taken by Clang, the optimization level feeds into
both the configuration of the LLVM pass pipeline and the attributes
added to function definitions generated by the frontend.
Optimization is performed in a new phase, `optimize`, which runs between
`lower` and `codegen`.
---------
Co-authored-by: Dana Jansens <danakj@orodu.net>
Co-authored-by: Chandler Carruth <chandlerc@gmail.com>
Nicholas Bishop
Geoff Romer
Christopher Di BellaandRichard Smith
Dana Jansens
Lucile Rose Nihlen
David Blaikie
Jon Ross-Perkinsandjonmeow
Özgür
